Make a door to the gazebo with your own hands. Sliding glass doors for verandas, terraces, gazebos. Additional building material required for the manufacture of sliding doors

The construction of the gazebo does not end with the assembly of the frame. There are still a number of nuances that remain to be settled, one of which is called the door. The publication presents various options fulfillment of this moment.

I will not dwell on the classic door with steel hinges. You can come to the store at any time, take the cheapest one from the display window and easily install it on your site.

Below there will be more interesting construction solutions.

A professional solution would be installation sliding system V doorway your gazebo. The option is more suitable for large buildings, but for small ones it can also be considered.

The sliding system consists of several double-glazed windows that slide to one side. As a result, it appears free space for movement. If necessary, the door slides back and tightly closes the gazebo.

The effect of movement is clearly shown in the video from the channel “ INTRUST».

Accordion

In part, they can also be called sliding, but this is not entirely true.

Rather, they fold, and during this process they take on the shape of an accordion. This is clearly shown in the photo below.

Wouldn’t you like to have such a view from the windows in your summer cottage? 🙂

Double-glazed windows run along guides from below and above.

If necessary, they open and several double-glazed windows are moved to one side. Then they go back, stand in their original places and are fixed. If desired, you can use only one door.

"Gates"

Saw it several times on the internet interesting idea with doors in the form of gates. I associate them with the American wild west, taverns and cowboys. Look at the photo below, don't you think so?

Polycarbonate

The idea is more often implemented in greenhouses, but if you have polycarbonate left and don’t have enough doors, why not make a budget passage to the gazebo?

The installation process is elementary. The main thing is not to crush the slabs and save the material before it is installed in the doorway.

Other interesting ideas

Finally, I will make a small selection of options that evoked pleasant emotions and associations in me.

I would not say that it is very advisable to spend a lot of money on a regular summerhouse, especially if there is nothing of particular value inside. But for the sake of interesting impressions on guests, this can be done. I am sure that the summer residents whose doors were included in our selection succeeded :)

Most Russian gazebos will probably still have classic doors. But if we please at least one person with an interesting idea and he implements it, then our mission can be considered completed.

Sliding glass doors are characterized by a number of advantages: they save space, have beautiful view and easy to maintain. They visually increase the volume of the room and have good aesthetic qualities.

Sliding glass systems are ergonomic, functional, and original. They can be made according to individual project, but standard ones are cheaper. Glass doors give modern look, lightness to the room, improve illumination. They fit well into the interior of the gazebo, creating comfort, convenience and coziness.

Types of doors by design and filling

Installing doors in a gazebo

By design they are distinguished:

Single doors
Single-leaf with side parts or with a fixed component
Bivalve
Double-leaf with movable or fixed leaves
Radial.

Radius sliding glass doors fit perfectly into gazebos with round shapes. This is an expensive option, because you need to make curved rails and a curved door leaf. This sophisticated option impresses with its originality and comfort.

Various glasses are used for doors: tinted, frosted, stained glass, decorated. Canvases with a pattern that is applied are also used various methods. A unique design can be created using a stencil or decor. An original decoration element: doors with mosaics, three-dimensional decorative elements. Sometimes a film is glued that differs both in texture and in a variety of colors.

Acrylic, tempered, impact-resistant, triplex - these are the types of glass used depending on the strength characteristics. The use of special glass, which shatters into small fragments upon impact, saves you from serious injuries. Durability and safety are important advantages.

Glass doors are framed in aluminum, wood, plastic, or can be frameless. Used for gazebo aluminum profile in order to increase strength.

The aluminum sash has good load-bearing qualities. With its help it is possible to produce structures of considerable size and different color, because painting is possible. Glazing without a frame: stylish, original, fits into a gazebo of any architecture and offers an excellent view.

Advantages and principle of operation of sliding doors

Self-installation doors in the gazebo

Main advantages of glass doors:

Space saving
Easy opening
No thresholds (if there is no bottom guide)
Self-opening resistance
Versatility
Safety.

Sliding glass structures have the same operating principle as sliding wardrobes: they are held on top by carriages and slide apart to different sides. A sliding door is perfect for a gazebo. Reliability, practicality, and original design ensure comfort and safety.

The door structure consists of a roller mechanism, glass and guides. There may be several of them. The kit also includes fittings, decorative panels, trims. Fittings used certain type: it should not protrude above the surface so that the structure can move to the side or into a niche. The guides and roller mechanism are selected taking into account the number of leaves, weight and type of door.

Glass doors have enough heavy weight and you need to choose a durable and reliable mechanism. The guides for the gazebo must be secured at both the top and bottom so that the structure ensures safety.

Tools and components used to install doors

Door handles, rollers, rails, fasteners, stops, bolts - the main components.

The following tools are used for work:

Screwdriver
Roulette
Drill
Level
Polyurethane foam
Mounting kit.

Do-it-yourself door installation

You can install the doors yourself if you buy the necessary components and have knowledge of installation technology.

First you need to mark and install guides along the marked lines (on the ceiling and on the floor). They must be strictly horizontal and longer than the opening to eliminate the possibility of the doors falling off.

Glass doors have fasteners made of metal claws with internal rubber linings. The glass is secured with screws. Roller mechanism can be hidden behind a decorative strip.

The installation of sliding doors is discussed in detail in the video:

Operating procedure:

Doorway measurement
Installation of the bottom rail with checking for unevenness with a level
Complete set of the canvas with fasteners from the bottom and top
Installing the top bar
Attaching the guides to the plank using self-tapping screws or dowels
Installation of locking pads
Consolidation decorative panel to improve appearance
Installation of accessories.

For glass doors, handles made of anodized aluminum or of stainless steel to ensure reliability and durability. Modern sliding doors are equipped with handles different forms with recesses.

The glass is brought to the upper guide and suspended. While tilting the glass, make sure that each roller engages. Next, the canvas is joined to the lower guide. The doors are moved and opened several times to check that they move smoothly and that there are no distortions.

You should not buy sliding doors in small organizations, which will not be able to provide decent quality. Good manufacturer must provide a guarantee. Low cost is a reason not to trust the company, because glass structures are not cheap.

Sliding doors- it's stylish, comfortable, beautiful. They are very popular because they are not only beautiful, but also functional. The ability to move apart in different directions and quickly change the environment allows you to install sliding doors as a successful and practical element of the interior. But if they are not installed correctly, they can rattle, move unevenly, or jam.

Therefore, the sliding mechanism must be carefully selected.

Possibility of transformation from closed space in the open, a huge selection of design, panoramic view, safety, durability, ease of maintenance - all these advantages allow you to use sliding structures as an excellent decoration for your summer cottage.

September 17, 2016
Specialization: master in construction plasterboard structures, finishing works and styling floor coverings. Installation of door and window units, finishing of facades, installation of electrical, plumbing and heating - I can give detailed advice on all types of work.

If you have a gazebo on your site, then the issue of protecting the space from adverse weather influences and wind requires the closest attention. In this review, I will talk about several options for solving the problem; they differ very much in design, cost, and protective characteristics. You need to decide which solution will be optimal: or sliding windows for a gazebo, or solid glazing, or simpler and cheaper soft PVC materials.

Overview of main solutions

I will tell you about several options, and they will be considered from simple to more complex and expensive. You need to get acquainted with all of them and choose the one that will satisfy all your requirements and will not be too expensive in financially. Of course, and appearance will vary, so aesthetic side The issue should also not be overlooked.

Option No. 1 - structures from old windows

DIY gazebo from window frames, which were used previously - the cheapest solution, since the main elements can be found almost free of charge or for minimal money. The most important thing here is to find sufficient quantity ram, and if you succeeded, then this section will tell you how to build a place for a summer vacation out of them.

If almost all other options require a ready-made gazebo, then in this case it can be quickly built from scratch.

For the construction you will need following materials:

Materials	Purpose
Old windows	It is best that they are the same size, this will significantly simplify the workflow and improve the appearance of the final result. The products should be quite durable; it is better not to take rotten frames, as they will not last you long
Wood block	With its help, the frame of the structure will be constructed, as well as the connection of all elements to each other. The minimum cross-section is 50x50 or more - it is important that the elements can withstand high loads and ensure the reliability of the future structure
Concrete blocks	They will serve as the base of the gazebo; a beam will be placed on them, which will eliminate its contact with the ground and extend the service life of the entire structure. The number of elements is calculated individually in each specific case, taking into account the size of the structure
Board	It is needed to construct the floor, and can also be used to sew up the bottom, although window frames from bottom to top can be used
Fasteners	To connect all the elements into a single whole, self-tapping screws and perforated corners with stiffeners are used. These modern solutions much more reliable than conventional nails, in addition, their use speeds up the construction process
Dye	Since old frames and untreated wooden blocks will be used during the work, all surfaces must be painted to protect them from atmospheric influences.

You also cannot do without a certain set of tools:

A hand saw for sawing bars and boards or a power tool for the same purpose;

A screwdriver with a set of bits for the screws used;
Tape measure and square for marking. The level will help to level the structure.

As for the workflow, it consists of several stages:

First, the site for construction is cleared, the site is cleared of debris and leveled. The base must be strong so that subsequently individual parts of the structure do not sag;
Then they lay out concrete blocks, usually they are located in the corners and in the middle of the walls. To ensure that the elements stand in their place, they can be slightly deepened into the ground;
The surface of the blocks is covered with roofing felt, after which it is assembled - its lower part and vertical corner posts, the position of which is fixed using braces. All elements are held together using reinforced perforated corners and self-tapping screws, this is both reliable and fast;

Next, the window frames are placed and secured, they are fixed to the beam from above and below; if the sizes of the elements are different, then the resulting voids are covered with a board or other available material - for example, plywood. Another beam is placed on top, after which the structure is reinforced with jumpers. If there are gaps between the frames, then the easiest way is to fill them polyurethane foam and cover with slats;

As for the roof, it can be the most different designs, from the simplest single-slope option and slate up gable systems or semicircular roof made of metal pipes and polycarbonate. The last option is more difficult to implement, but you will get an original and, importantly, light-transmitting roof;

IN last resort the structure is painted in specific color– a structure made of multi-colored parts does not look very good. If your gazebo is assembled entirely from windows, then the lower part of the glazing can also be painted over.

Such a structure will cost you a couple of thousand rubles, or even cheaper, because you can adapt the materials that are at hand. Naturally, it is better to glaze a gazebo from old window frames before assembling it; I advise removing all the glass, then placing them on silicone and securing them with new glazing beads.

The frames can be quickly and reliably fastened together using perforated plates; this is especially convenient if you need to further strengthen the structure; a bar on top and bottom may not be enough.

Option No. 2 - soft windows

This type of product is otherwise called “flexible windows” and has the following features:

The openings are closed with elastic PVC material, which, if necessary, can be quickly removed to admire the beauty of nature;
The light transmittance of the structure is 90%, which is quite enough to provide high-quality natural lighting;

The service life of the material is about 10 years, which is also important;
The price of the material is 1500-1800 rubles per square meter, it is much cheaper than other ready-made options;
You can also order a door made of a material that closes with a zipper and provides excellent protection against mosquitoes and other insects.

Here, naturally, you should already have a ready-made gazebo. To close it with flexible windows, you need to follow a few simple steps:

First, you need to take measurements of the openings in order to determine the dimensions of future elements. They must extend onto the surface of the gazebo, because fasteners will be installed there;
Next, soft PVC windows of the required configuration are ordered, all the nuances will be advised to you by the manufacturing company, only the exact dimensions are required from you;
Fixing the windows is very simple: special metal elements are attached to the canvases, which are inserted into the eyelets and secured with a strap. The eyelet is attached to the base using screws or dowels - it all depends on what your gazebo is made of. The work can be done on your own, it’s not difficult, and the savings will be about 15,000 rubles, which is what installers charge on average for installation;

When the eyelets are in place, you can attach flexible windows; everything is very simple and very fast.

If you cannot decide how to close the openings in the gazebo, then this option may be ideal solution due to simplicity and practicality.

Option No. 3 – polycarbonate windows

This one is lightweight and inexpensive material appeared relatively recently, but has already gained great popularity both in roofing works, and when closing openings in gazebos, this is due to several factors:

The material is lightweight, which makes it easier to work with;
The cost per square meter is about 250 rubles, which makes polycarbonate accessible to a wide range of buyers;
The range of colors is quite wide;
The design looks very good and lasts about 15 years.

As for the features of using this material, they are as follows:

To assemble a reliable and attractive structure, a special aluminum profile is used; from it you can quickly build a strong and lightweight frame into which polycarbonate is inserted. The profile is ordered in linear meters and is calculated individually in each specific case;

If you are sheathing the gazebo completely, the material can be attached directly to the frame using special self-tapping screws with rubber washers. In this case, the ends of the polycarbonate must be closed end strips, which are glued to silicone, this prevents the accumulation of dirt inside the voids;

You can make sliding windows from polycarbonate for a gazebo; in this case, the frames are placed on guides along which they will move in one or two directions. There are many design options: from simple plastic profile to roller systems, choose what is most convenient for you;
The flexibility of polycarbonate makes it the only option for semicircular gazebos, because you can attach it to difficult surfaces yourself. This way you can make a dome-shaped gazebo.

Can also be used monolithic polycarbonate, which resembles glass, but unlike it is flexible. It is better to use options with a thickness of 3-4 mm; a sheet of such material measuring 2x3 meters will cost from 6500 to 8500 rubles; as you can see, this type of product is much more expensive than budget cellular polycarbonate.

Option No. 4 – sliding frames made of aluminum

This type of structure, such as sliding aluminum frames, is widely used on balconies, but they can also be used in gazebos with great success, because the design is easy to operate, light in weight, looks very good and perfectly withstands adverse weather conditions. atmospheric influences. Moreover, both windows and doors can be made from aluminum, which will give the gazebo lightness and simplicity..

As for the implementation of the project, I will consider it in general terms:

First of all, it is necessary to measure the openings; it is better to have this work performed by specialists, since any errors will lead to the need to order a new design;
When ordering, it is better to choose options on rollers; they work much easier and much more reliably than simple frames on guides. It’s better to read people’s reviews about a particular company to choose the best manufacturer in your region;

It is better to entrust the installation work to specialists, since any errors in the process lead to distortions in the structure, and it will not work correctly or the sashes will not move at all. This is associated with additional costs, but for the sake of best result better to spend a little more.

Option No. 5 – PVC windows

I’ll say right away - this is the most expensive solution, but if you want to use the gazebo in cold period years, then this type of glazing fits better Total. The thermal insulation characteristics of plastic double-glazed windows are an order of magnitude higher than any of the above options, so they should be installed on permanent structures so that it does not turn out that the windows are warmer than the walls.

To glaze a structure with plastic windows, you need to use a simple algorithm:

First of all, the openings are measured; if you do this, remember that there should be a gap of 2-3 centimeters on each side, this will allow you to clearly set the position of the windows and insulate the gap with foam;
Then you need to order the double-glazed windows themselves; I advise you to carefully choose the manufacturer, since there are many options and not all of them have high quality. Give preference to brands with a good reputation, there are many of them, and they are represented in each region different variants. Quality products will cost you from 4000 per square meter and above, it is better not to consider cheap options;
You can completely build a gazebo from plastic windows, more precisely from a PVC profile. This is not the cheapest solution, but its implementation is very simple: they will make a design for you the right size and shapes, and the only thing you have to build yourself is the roof; the easiest way is to make it from wood.

If you decide to build a gazebo from plastic, then I advise you to cover the lower part of the structure not with double-glazed windows, but with blind elements; they are much more reliable and will withstand even strong impacts without any problems.

Conclusion

You must decide what purpose the windows should serve if in summer period you need open design, then flexible windows for the gazebo will become the best solution, and if you need the highest quality insulation, then plastic double glazed windows will fit best. The video in this article will help you understand individual nuances even better, and if you want to clarify any questions, then ask them in the comments under the review.

The door to the gazebo may not be ordinary wood or iron with standard hinges. At the moment, there are various modifications designed for any connoisseur. Therefore, you should not stop at simple version, and decorate the gazebo with some unusual device.

Popular types of doors to the gazebo

There are many options for doors that can be equipped with a gazebo. They differ in designs and materials.

Did you know? The oldest door still in use today is in England. It is not known for certain who made it and when, but according to measurements made by scientists, it was produced in the 19th century.

Example of the most popular:

Sliding (sliding) doors with aluminum profile. Mainly used for large buildings, but can also be installed on small structures. It is assembled from several sections that move to one side.
Accordion folding doors. Not to be confused with sliding ones, they do not move apart, but fold. Each leaf consists of several sections that move from top to bottom.
American. It is made in the form of hinged wooden doors in the style of American saloons from the times of cowboys. Suitable for a non-glazed version of the gazebo.
Polycarbonate door. This material is usually used in greenhouses. This is a budget option, but if you approach this with the right skill, you will get a decent design that you can make with your own hands.
Radial. Mounted on gazebos shaped like a circle. Made from glass and curved rails. This option is expensive and they are placed on a curved door portal.

Sliding

This view in Lately is starting to gain popularity. It is mounted on glazed gazebos, as it has the ability to close tightly and not let in cold air.

There are several types of such portals:

Sliding. The functionality of this design is similar to that installed in trolleybuses. The canvas moves towards the opening one and to the side. This door is equipped with a special lock that can lock it in any position convenient for the owner.
Shifting along the rise. To open such a door, you must first lift it slightly up. It differs in that when closing, sealing mechanisms are activated that reliably close the portal.
Folding. It has 2-3 doors that fold like an accordion. The good thing is that when closed it completely clears the passage. The downside is poor thermal insulation.

The price of sliding portals depends on:

material;
size;
installation (on your own or not);
Scenery;
types of structures.

Accordion (folding)

Folding portals differ in types and design options. By type of device they are divided into:

consisting of narrow lamellas and a panel base;
having two guides.

If the first type of device has rollers at the bottom, thanks to which it opens and closes, then the second is equipped with synchronizers that have the ability to move more smoothly and close better.

Important! Accordion-folding doors have one big advantage - their compactness, so such products are best used in small buildings.

Varieties of such doors are divided according to the materials from which they were made:

Wooden. The most environmentally friendly variety. In its manufacture, oak, veneer or pressed shavings can be used, it all depends on the financial capabilities of the owner of the gazebo.
Plastic. Plastic products have two advantages - low price And big choice. They can be any color and decorated in any way. In addition, they are quite durable and not subject to weather and mechanical influences. But the sound and heat insulation of this material is not up to par.
Glass. Used to close wide portals. They look rich, can be matte or mosaic. Also on glass surfaces You can apply a colored film or sandblasting pattern. They transmit light well, making them suitable for gazebos located in shady place. They are not fussy to care for, but they have two disadvantages: high price and heavy weight.
Textile. Gazebos serve a purely decorative function. Even if the fabric in the sections is very dense, it performs noise and any other insulating functions poorly. The only thing it is good for is keeping flying insects out of a glassed room. evening time. This option can be used as a “temporary” option until something more suitable is purchased.

How to make a polycarbonate sliding door

Polycarbonate material is good because it can be used to make any type of portal - sliding, hinged, frameless and framed. By selecting the right option you can start creating it.

Important! When installing doors into a polycarbonate gazebo, it is necessary to take into account the thermal deformation of this material. Without this, the canvas may deteriorate or tear in winter.

The actual construction of sliding doors from polycarbonate material is divided into a number of simple steps:

Cutting sheets. Can be produced circular saw or regular construction knife. The main thing is to correctly measure the desired piece of fabric and cover it along the edges with adhesive tape in order to avoid contamination.
Drilling. This work can be done with a regular drill on metal. But it must be new or practically unused. Holes should be made between the stiffeners. It is also necessary that they are at least 0.5 cm away from the edges.
Fasteners. The polycarbonate material is fastened with ordinary self-tapping screws or thermal washers. The latter are more preferable, as they have a latch, which improves the tightness during fastening.
Sealing. Produced with perforation tape or aluminum self-adhesive. It must be done at the ends of the sheet to prevent contamination and condensation.

Required materials and tools

The standard set of tools and materials for creating polycarbonate sliding doors includes:

self-tapping screws and thermal washers;
electric drill with a set of drills;
polycarbonate sheet;
metal corners;
level and tape measure;
awnings;
wooden beam;
device for cutting polycarbonate.

Creation technology

To create a sliding door, you must follow a certain algorithm:

Measure the material and doorway.
Mount the frame.
Cover the door leaf.
Install awnings.
Install the portal.

Measurement work is mandatory entrance opening, since the main canvas is created from them. Its corners should be even to avoid distortions during further use. Before sheathing the canvas, you can paint it, but before that you should sand the surface.

Installation Features

Installation of a sliding door should begin with the installation of a guide mechanism.

Did you know? The heaviest door on globe installed at the California National Laboratory. Its height is 2.5 m and its weight is 312 tons.

Myself step by step process should be done as follows:

Installation of the guide mechanism.
Mounting rings on polycarbonate sheet.
Painting the canvas.
Installing the door structure to the guides.
Carrying out sound insulation.

The doors in the gazebo can look different. Currently exists wide choose materials and structures for door leaf. The choice depends on preference and financial opportunities owner.

More recently, the main purpose of polycarbonate was the construction of country greenhouses, shower cabins, and the construction of canopies or canopies over the porch. But today this material is successfully used for finishing apartments. Thus, polycarbonate doors have become a successful design development, which can be used to decorate not only garden buildings, but also urban premises.

Frame doors consist of wood, plastic or metal frame, into which polycarbonate sheets are inserted.

Great amount color options, in which this is produced construction material, allows you to produce interior designs that fully correspond to the style directions and shades of the apartment’s decoration. And other advantages of doors made from polycarbonate with your own hands are obvious:

The material has a small mass, which makes structures made from it light and airy.
Polycarbonate elements are more reliable and safer than glass elements.
Even when cracked, polycarbonate does not crumble into small fragments.
Caring for elements made from this material is very easy and simple.

Considering all the above advantages of the material, it is possible to produce interior elements, different for a long time service and durability.

Features of polycarbonate door structures

Image 1. Diagram of a polycarbonate hinged door.

Today, 2 construction options have been developed interior designs made of polycarbonate with your own hands. So, you can make hinged or sliding doors. Like conventional designs, hinged doors are traditional canvases installed using special fasteners on door frame. Option sliding elements created on the principle of a compartment, where the doors open along the walls.

Both can be framed or frameless. For creating frame elements base frames are used in which polycarbonate sheets are installed. Such frames can be metal, plastic or wood. No other material other than polycarbonate is used to create frameless elements. Doors made from solid canvas look very beautiful and rich, but you will have to spend a little more money on their arrangement than on creating a structure with a frame.

Related article: How to remove a door from its hinges

Algorithm of actions for the manufacture of hinged doors

Polycarbonate is a very easy to process material, therefore, in order to make a door from polycarbonate on our own, you will need very few tools. The minimum set consists of:

electric drills with drills;
screwdriver or screwdriver;
level;
measuring tape;
construction square;
cutting machine or jigsaw.

For a frame door you need to prepare:

Tools for installing a polycarbonate door.

a single piece of polycarbonate or several pieces, the size corresponding to the size of the doorway;
a corner made of plastic or metal, a beam whose length is equal to the perimeter of the doorway;
self-tapping screws;
corners for securing the sides of the frame;
fastening materials for fastening door design to the box.

To make a frameless product, you only need fasteners and a polycarbonate sheet.

The algorithm for making polycarbonate elements with your own hands is quite simple, and can be easily handled by a person with minimal carpentry skills. An example of a frame product is shown in the figure (image 1).

First of all, it is necessary to take measurements of the opening where the structure will be hung. The frame is assembled in accordance with the measurements. It should be taken into account that the frame should be slightly smaller than the opening, so all sides of the frame and leaf should be reduced by 1-1.5 mm, which will allow the leaf to close firmly, but without touching the door frame.

When making a frame, you need to very carefully measure the rectangularity of the structure using a square, otherwise the door simply will not fit into the opening. In order to connect a timber frame, you can use special metal corners. If the frame is assembled from plastic or metal materials, corners may not be used. After assembly wooden frame You should add additional aesthetics by sanding it well and covering it with stain or varnish.

Frameless doors are made from a single sheet of polycarbonate and have a higher price compared to framed doors.

Rules for making sliding doors

To assemble the sliding product, you will need the following materials and tools:

polycarbonate sheet 5-6 cm high and wide more sizes doorway;
a metal tube to create a guide 2 times the width of the doorway;
fasteners;
anchors for securing a metal tube;
set of materials indicated above.

When it's done sliding design, work begins with attaching the guide. In this case, the metal tube must be fixed at a height of 5 to 10 cm above the doorway. One half of the tube is located directly above the doorway, the second is shifted along the plane of the wall in the direction where the door should open.

Then rings are screwed onto the polycarbonate sheet with fasteners, with the help of which the sheet will move along the guide. The rings should be attached in such a way that the door is at a distance of 1-1.5 mm from the floor. If a threshold is installed in the opening, then the canvas can be lowered slightly below it, which will create the possibility of closing the opening more tightly.