To print

Vladimir Marchenko 01/13/2015 | 14812

Owners of fireplaces are faced with a choice: do I need to buy a stand for firewood or not? If so, which firewood to choose? What is their difference and why do some cost many times more than others, and some can even be done by yourself?

What could be nicer than a winter evening by the fireplace? The live flame gives natural warmth, and the logs crackle softly, adding coziness and creating a unique atmosphere. The only problem is that you have to run outside for firewood. And then they still have to dry for a while. However, this is not required if you decide to buy a firewood stand or make it yourself. Then you will always have a supply at hand, which is enough for at least one cold evening.

Many models of fireplaces are equipped with special niches for storing firewood. If this is not provided, and the interior features do not allow storing firewood in the room, then a stand for them will be the best solution.

Multifunctional firewood stands not only secure firewood or decorate the interior, but are also used for carrying and transporting logs.

Let's get acquainted with interesting design solutions that are suitable for any interior.

Types of stands for firewood

The woodshed, as a place for storing and storing firewood, was invented a long time ago. Conventionally, four sub-varieties of firewood stands are distinguished:

• street,
• stationary,
• room,
• portable.

- this is usually a small container with holes for blowing logs so that they dry faster.

Stationary firewood stand usually equipped next to the fireplace. It can take the form of a lower shelf in which firewood is stored, or occupy niches in the wall on both sides of the fireplace.

Indoor firewood stand installed directly in the room. In it, you can store and additionally dry a few logs, which will then go to the first kindling.

Portable firewood has the shape of a basket with handles, they take it with them to the house or when it is necessary to bring some of the logs from the "street warehouse".

Which wood stand should I choose?

Before you go to the store for a purchase, decide what exactly you need this or that firewood rack for. If it should be a beautiful addition to the fireplace, a small shelf for drying firewood, then your choice is a stationary firewood rack. For those who plan to carry firewood from the street, portable firewood stands are suitable. And finally, if the firewood rack, in your understanding, should become a spectacular addition to the interior, then you should purchase an ordinary room woodpile.

In order for the firewood stand to fit into the overall concept, it should be selected depending on the style of the room. So, if the interior is dominated by "wooden" motifs, it is decorated in the style of "country", etc., the best choice there will be a firewood rack made of wood or its wicker counterpart. For lovers of the classics or pretentious aristocracy, forged firewood racks with smooth and curved legs are suitable. The "modern" style involves the use of laconic metal profile stands, chrome-plated parts and, in general, the brilliance of metal in any of its manifestations.

Recognized leaders in the production of fireplace accessories are companies such as Heibi, Schutt, Ragar, Focus, Kratki, Tula Forging, etc.

Wrought iron stands and grates for firewood

Firewood stands made of cast iron or brass,ideal for open fireplaces. Artistic welding and forging is a professional craft available to owners of blacksmith workshops. These coasters are elegant, durable and reliable, they will be able to decorate the fireplace space for many years.

Disadvantages of forged coasters - big weight and high price. The first problem is eliminated by the manufacture of lightweight molds, for example, with a slatted bottom instead of a solid one. True, all the dust and the remains of the bark from the logs crumble through such a bottom. If you want to avoid this, choose models with a solid bottom.

But there is no escape from the high price - manual labor and expensive materials are not cheap.

Tin firewood racks

Vintage firewood buckets again imperceptibly came into vogue. In fact, any cylindrical container with a carrying handle can act as their role. You can either use an old bucket left over from time immemorial, or decorate it to give it a personality.

You can find in the attic or local "flea market" brass, copper or tin buckets. Pay attention to their useful volume, perhaps only a couple of logs will fit in them, then it is better to either prick them smaller, or choose a larger bucket.

Artistic forging and original images are also used by craftsmen in the manufacture of firewood buckets. Despite the "author's" intervention, such specimens are much cheaper than forged coasters and gratings.

Finally, the simplest option is galvanized troughs or pails which can be found at any hardware store. Yes, they are very simple in appearance, but they leave room for creativity. Ask what can be done with a bucket? We answer:

• paint in one or more colors;
• master the technique of decoupage;
• apply hand painting;
• age the surface or apply the "shabby chic" style.

wooden coasters

One of the popular solutions is wooden coasters for firewood. As source material any type of wood can be used. The only requirement is to place such stands at a considerable distance from the source of an open flame, do not allow sparks to enter.

Simple and effective solution will become normal fruit box or vegetables. If you decorate it appropriately and fasten the wheels, you will get a convenient and practical firewood cart.

As a stand for firewood, any old wooden things are used - kegs, sauna bowls, sled etc. Very interesting solution is such - to make a stand for firewood from the logs themselves.

Homemade firewood

In the presence of fantasy, almost any material or object can act as the basis for a stand or a firewood grate. For example, if we take wicker or a vine, from which you can weave a simple basket in which firewood will be stored. For lovers of the exotic, a rattan or abacus is suitable, they make durable and lightweight firewood.

Winter, snowdrifts everywhere, frost sneaks even into the house ... To warm up faster, you decide to light a fireplace. Yes, yes, real wood burning fireplace, which has become a decoration of your home and a gathering place for the whole family in the evenings. You only need to throw firewood, but you don’t want to follow them outside! This is where a firewood rack for a fireplace or a complete set for a fireplace with a firewood rack, which can be installed near the fireplace screen, will become indispensable. Thanks to a variety of design solutions, firewood can be stored right in the house, making it an element of the interior.

What is included in the fireplace kit

The standard fireplace set, as a rule, necessarily includes a poker (it is also called a pike), a scoop for cleaning up ash and ash, and a brush for cleaning. Full list tools that can be useful for the full "maintenance" of the fireplace are much longer. In addition to the listed tools, to use the fireplace and subsequent care for it, you will need:

• tongs for coal or firewood;
• furs for blowing fire;
• metal pan for collecting coal;
• fireplace grate, performing protective function;
• bucket for coal.

A fully stocked fireplace set does not take up much space.

Firewood rack - the main element of the fireplace set

A capacious and durable firewood stand by the fireplace is necessary first of all. It is the main element of the fireplace set. Firstly, it saves the owner of the house from having to use unsuitable devices for storing firewood. The most common mistake is to buy a small firewood box that is not able to hold firewood even for one load. It may bring aesthetic pleasure, but it will not fulfill its intended purpose. Secondly, it is much more profitable and economical to purchase a stand in a kit than in retail.

Masterfully forged firewood can be a real work of art

Rules for choosing a firewood stand

Today's market offers a lot various options firewood of appropriate quality and from suitable materials. Durability, fire resistance and ease of cleaning are the priority qualities of any such product. Depending on the general style of the room in which the fireplace is located, you can stop at the “antique” set or at the modern functional version with minimal decor. Be sure to take into account the overall aesthetic orientation of the whole house, so that the choice is right.

What materials are firewood made from?

Wooden stand for firewood: a hymn to ecology

Special attention should be given to the choice of materials from which the firewood is made. So, wooden firewood with metal parts are great for interior spaces. They can be in the form of a cube, multi-storey - in the form of shelves for firewood, and fit perfectly into classic interior. You can choose the type and tone of wood according to your own preferences and the style of the room in which the fireplace is located. The tree may be simple or valuable breeds, decorated with carving or decoupage - your choice.

Light firewood from light wood can be varnished

Provincial romance of a firewood from a vine

Wicker firewood makes any room with a fireplace very cozy. They are made of bamboo, wicker or rattan in the form of baskets with handles or on wheels. Combine with wicker furniture and look incredibly good in eco-friendly interiors. They have only one drawback - small dust of logs and pieces of bark can wake up through cracks on the floor. Although these are trifles compared to the harmonious look of a wood-burning stand, which is easy to move into the yard.

Wicker wood rack fits perfectly into the surrounding interior

Metal firewood rack: strength and durability

Wrought iron firewood stand with metal swirls - traditional and a win-win. The design can harmonize with the finish of the fireplace screen and the rest of the tools, making the firewood rack excellent. decorative element. A duo of a simple iron stand covered with a special protective paint and a fireplace poker will be a great decoration for a retro living room. And exotic flowers and climbing stems on a metal firewood stand will create an atmosphere in the bedroom country house more romantic

Glass stand for firewood: luxurious and non-trivial

The height of sophistication and impeccability of taste will be a firewood rack made of heat-resistant glass. It will easily fit into any environment and emphasize the magnificent design of the central object of the room - the fireplace. The monolithic body of the glass firewood stand will securely hold all the chips, so that the floor will remain clean. Transparency and clarity of lines make this piece of furniture a very practical detail, and the ability to reflect the light of fire creates an atmosphere of comfort and light mystery. This stand looks especially good in the style of "hi-tech".

Glass firewood is ideal for lovers of sterile cleanliness

Where the firewood is useful

Regardless of the material, each stand is mobile. It can be taken outside at any time of the year to be installed in the barbecue area and safely cook barbecue. The need to bring firewood during the cooking process will disappear by itself. It is also easy to transport the firewood rack by car if you go to the country house or on a longer journey. One has only to make sure that the firewood for the woodpile is of the same length and diameter - this will allow you to neatly and tightly fold them into the stand upon arrival.

A firewood stand or a complete set of fireplace tools is not a luxury to show off to guests. These are necessary and very useful things in order to keep your fireplace in good working condition. The choice can be difficult: after all, there are many options, and your fireplace is one and only. Try to consult with experts who have experience in the selection of such accessories, or (if funds allow) call a designer at home. He will help you to accept the right decision.

And let the fire in your fireplace always burn brightly!

Video: accessories for stoves and fireplaces

For home improvement, the best invention at all times was the creation of fireplaces and stoves. Since ancient times, the stove has been a nurse, and was glorified in fairy tales and folklore. The fireplace is an improved version of the stove, with covered with glass firebox and more attractive appearance. And together with such heating structures firewood for fireplaces and stoves are used, which are necessary with practical side and perfectly complement the interior.

Currently, fireplaces have the following varieties:

1. — gas models
2. – electrical
3. – traditional, wood burning

The most popular firewood is birch. for storage chopped logs used firewood for fireplaces and stoves. Such a simple thing you can make yourself.

Modern fireplaces are: gas, electric and wood. The most popular is birch firewood, other types of trees are also used. To store logs for a fireplace or stove, people came up with such a fairly simple device. This design can be done by hand.

Firewood for fireplaces and stoves and their varieties

In the woodshed, logs during storage are more attractive in terms of aesthetics. They are of the following types:

• – street
• - room
• - stationary
• - portable

They are made from a variety of materials, but mostly wood and metal.

street models

This design is a small shed with open walls for blowing through the room. This is necessary to maintain the required moisture content of firewood.

Important: Firewood should lie on small stands and not damp during storage

Same way important point is a roof, the size of which depends on the volume of firewood used throughout the year. Outdoor woodsheds are made from different material, the main thing is to be able to store firewood for a long time. It is not at all difficult to make a woodcutter with your own hands.

room design

This type of requirement is more difficult. Such a design should not spoil the design of the room. Be practical and convenient to use. Wrought iron firewood racks are included and perfectly match with other elements such as wrought iron candlesticks, etc. Firewood for a fireplace made of metal nobly fits into the interiors of houses and cottages.

Wood firewood for fireplace

When working with such an easily accessible material, you can make a magnificent author's product. Using for this small pieces of boards, plywood and slats. The bottom is made concave, so more firewood can fit. Only a flight of fancy can limit you, but in any case, do not forget about the strength of the product.

For transporting firewood from a wood burner, you can make a structure with wheels. It will be a practical addition. The bottom of the structure is made of plywood, which does not give excess weight. If there is not enough imagination for the author's project, then you can take the finished one and add some of your own elements. When decorating, wood carvings, metal strips, various slats can be used. You can also paint wood to look like metal.

Stationary firewood for fireplaces and stoves

They are installed in the niches of the walls, next to the design of the fireplace. Also, a place to store firewood can be arranged in the fireplace itself. The stationary option is usually located at the bottom of the fireplace. Forms for storing logs can be any, as well as design solutions, the main thing is that everything harmoniously fits into the interior of the room.

A firewood storage structure will be an excellent decor element in a room where there is a fireplace. With the help of it, your floor will not suffer from the firewood laid on it, and the garbage will not be dragged around the room. By doing it yourself, you will create a great addition to your interior.

The presence of a fireplace or stove in the house involves organizing a place to store firewood both on the street and next to this heating facility. Moreover, the device for storing fuel most often has not only a functional, but also a decorative purpose. Very often it can become a real decoration for both the room and the courtyard.

Firewood for fireplaces and stoves can be made of different materials, and have various configurations. These factors directly depend on the choice of homeowners and the general design style of the room in which the stove is located.

What are firewood for?

Many people believe that firewood racks installed next to the fireplace perform an exclusively decorative function, therefore they consider them an optional element. However, they were originally intended for a completely different purpose - this is the final drying of firewood before loading their combustion chamber.

In whatever conditions the firewood is stored on the street, before using it, they must be at room temperature for at least a day. At this time, excess moisture evaporates from the logs, due to which the heat transfer from their combustion increases significantly.

Thus, each subsequent batch of firewood is usually brought into the room and placed in the woodshed immediately after laying the already dried logs in the oven (fireplace).

Therefore, manufacturers metal furnaces and fireplaces provide in many of their models special niches for drying firewood.

But in order for the wood to quickly reach the optimal state of residual moisture indoors, it is also necessary to create for it outdoors right conditions storage.

Therefore, chopped firewood is stacked in a woodpile. It will be best if the firewood is in a ventilated shed. But if there is no such possibility, a firewood shed is equipped for the woodpile, which should also be ventilated. Its side walls must be left open. Well, if such a structure is installed along the wall of a house or an outbuilding, then a distance of at least 50 mm should be provided between the surface of the wall and the firewood. Of course, the outdoor firewood shed must have a roof so that water and snow get as little as possible on the surface of the wood.

If the firewood shed is installed in that part of the yard where no ground cover was created, that is, on open ground, it is recommended to raise the lower layer of firewood by 100 ÷ 150 mm so that ground moisture does not penetrate into the wood. To do this, a shelf is arranged in the lower part of the building or a layer of moisture-resistant material is laid out.

What are firewood made from?

Firewood racks installed outdoors can be made of both wood and metal.

However, do not forget that wood and metal have completely different physical characteristics. When the temperature changes to metal parts Condensation forms and the wood can absorb this moisture. Therefore, it is best to build a street firewood shed from wood. It is possible, in principle, to use both of these materials, but by arranging the structure so that the firewood does not come into contact with the metal.

Stands for firewood installed indoors, directly near the stove or fireplace, on the contrary, are best made of metal. This material accepts the air temperature and will contribute to the rapid drying of the wood. Since the firewood rack is installed about heater, the metal will warm up above the general room temperature, which will also benefit when drying firewood.

Vesuvius firewood prices

Woodcutter Vesuvius

Another good option are firewood built into the wall, that is, erected during the construction of a brick fireplace, or built later in the form drywall construction from fire-resistant plasterboard

Niches built into the wall near the stove or fireplace, as a rule, have a large volume, which allows you to dry a lot of fuel at once. As it is used, stocks are gradually replenished. Fresh wood will bring a healthy forest aroma to the room, which will last constantly and be updated with each new batch of firewood.

Another material that is often used for the manufacture of firewood is willow branches, from which baskets are woven. various forms. The convenience of such stands lies in their small mass. So, taking a basket, you can go for firewood to the yard to the woodpile, and then, without shifting them, install a stand near the fireplace, avoiding floor contamination.

Varieties of firewood used indoors

As can be understood from the information presented above, firewood racks installed in a room can be stationary and mobile, that is, portable or mobile.

Stationary stands for firewood

The following options can be called stationary stands for firewood:

- made of heavy forged metal;

- built into the design of the stove or fireplace;

- firewood, equipped in a wall niche;

- attached to the wall;

- Made in the form of cabinets or cabinets.

Advantage stationary options lies in the fact that the design can have a large capacity, which will save you from the constant replenishment of it with firewood, so a full "refueling" will last for a long time. At the same time, many models of stationary firewood racks take up a lot of useful space, which is unacceptable for rooms with small area. The exceptions are drying chambers built into the fireplace or stove itself, or niches arranged in the wall.

Mobile firewood sheds

Mobile options for firewood stands include portable firewood racks and mobile models equipped with wheels.

Portable coasters can be made of light metal, wood, or woven from branches. Most often, these products are quite small in size.

Metal portable coasters - compact in size, usually decorated with beautiful forged elements. Therefore, they will not only become a decorative detail of the interior, but also serve for a long time. Stands made in the factory, as a rule, have an anti-corrosion coating, which helps to maintain the aesthetic appearance of products throughout the entire period of operation.

Wicker stands have an aesthetic appearance and light weight, so it is convenient to deliver firewood to the stove in them. However, they quickly lose their attractiveness, since the logs not only have a certain, very considerable weight, but also uneven edges, as well as a rough bark. All this damages the surfaces of the baskets, leading to their rapid wear. Therefore, they cannot be called practical.

Mobile structures are also made of metal or wood, but they can have more impressive dimensions and capacity. All thanks to the fact that wheels are installed on them.

These designs are easy to use, as they can be rolled up to the door and filled with firewood without carrying logs across the room. When loading firewood into the firebox of the heater, the stand can also be installed in the position that is most convenient for you.

In addition, wheel stands often provide special hooks for hanging brushes, pokers and other fireplace accessories.

Prices for mobile firewood

firewood sheds

You might be interested in information on how to choose a wood burning

Do-it-yourself firewood carrier - step by step

In order not to go outside once again in the cold season for another batch of firewood and not to bring excessive garbage into the house, which is inevitable when storing logs on the floors, it is imperative to have a firewood shed.

Firewood is usually brought in an armful, soiling household clothes. And to facilitate this process and save on laundry, it will be very nice to have a portable mini coaster in the house.

The easiest way to acquire this accessory is to purchase it in a specialized store, especially since the range of these products is quite wide. On sale you can find coasters made of different materials, so it is possible to choose an option that will harmonize well with general design interior.

However, keep in mind that fireplace accessories are quite expensive. Therefore, many owners of houses with fireplaces prefer to make such products on their own. It should be noted that the simplest version of the carrying stand can be made by most home craftsmen, even those who do not have much experience working with complex tools. And what is important - without significant costs.

For work, you will need to prepare some tools and materials:

• From the tools you need a grinder ( Sander), welding machine, vise, hammer and two pieces metal pipe with a diameter of 30 ÷ 35 and 70 ÷ 80 mm, which will become a template for bending the rod.
• Of the materials, three reinforcing bars with a length of 1500 mm, a diameter of 7 ÷ 8 mm, as well as a sheet of metal with a thickness of 0.5 ÷ 1.0 mm and a size of 600 ÷ 800 mm will be needed. In addition, you will need a well-crafted wooden handle with a diameter of 25 ÷ 30 mm and a length of 500 mm.

When everything you need is ready, you can proceed to the work.

Illustrations are blanks and the process of assembling them into a finished product.	Brief description of the operations performed.
	The first step is to make two identical rings with an inner diameter of 25÷30 mm. It is better to carry out this process with the help of a pipe bender, but, as a rule, only professionals have this tool. Therefore, you can use a vise, a hammer and a prepared pipe template. The reinforcing bar together with the pipe is clamped in a vice. Then, by gradually knocking the rod around the pipe, it bends into a ring. After that, the excess part of the rod is cut off with a grinder. Rings with this diameter will need 2 pieces.
	Four rings are made in a similar way with inside diameter in 70 ÷ 80 mm - these elements will serve as the legs of the stand. These four rings should not be closed - a gap of 10 ÷ 12 mm must be left between the ends of the rod. This gap in the future, when assembling the structure, will allow some adjustments.
	Further, two loops are formed from the rods - pendants. They can be round or trapezoidal. These blanks will form the supporting part of the structure. If the shape shown in the illustration is selected, then its lower part is made in the form of a semicircle with a radius of 200 mm. At the end of the semicircle, the ends of the rod go at an angle, and then bend at the top, forming a semicircle with a diameter of 60 mm. In the upper part, the ends of the rod are fixed together by welding. After that, at the top inside loops, previously prepared rings with an inner diameter of 25 ÷ 30 mm are welded. In this case, the gap between the ends of the rod that formed the rings must remain open. These rings are designed to fit wooden handle firewood stands.
	The next step on the prepared blanks is marking for welding the rings - the legs of the stand. The rings must be located at the same distance from the center of the semicircle, otherwise the stand will stand unevenly.
	In addition, the leg rings must be fixed so that there is a gap of 25 ÷ 30 mm between the floor and the lower edge of the suspension loop. Two blanks must be absolutely identical, otherwise the design will turn out to be skewed.
	In the example shown, a wall from an old washing machine was used as a pallet. The material was perfect for the stand, both in terms of thickness and due to the presence of a high-quality professional coating, as well as rigid ribs located around the entire perimeter of the panel. The panel metal thickness is 0.75mm, and linear dimensions- 600×800 mm.
	The metal sheet must be bent. For this process, an edit (template) is used that has cylindrical shape and a radius exceeding the radius of the semicircle of the lower part of the blanks, since the sheet must stand up against them. As a template, you can use an evenly planed log, a cut of a large diameter pipe, or an empty gas cylinder.
	If a panel with rigid curved edges along the edges, as in this example, is used to form a pallet in the form of a half-cylinder, then on its long sides grooves are marked and exactly opposite each other. Their width will depend on the diameter of the reinforcing bar from which the base blanks are made. The distance between the cut gaps in this design is 300 mm. However, it may be chosen at the discretion of the craftsman, and depending on the length of the shortest logs that are planned to be carried in the stand.
	As a handle for a portable stand, the master used a shovel handle, which is cut to the required length. It is important that the stalk is well processed, otherwise you can easily injure your hand on it or plant a splinter. The rest of the wood is the best option for the handle - it is pleasant to the hands and reliable in operation.
	Next, the finished handle is inserted into the rings fixed at the top metal blanks. The distance between the blanks must be equal to the distance between the grooves cut in the pallet panel. Having installed the handle and set the pendants at the desired distance, their rings must be compressed so that the metal fits snugly against the wood. Crimping is done with a hammer. The rings must not move along the handle.
	The final step is to put the pallet in place. To do this, the edges of the bent panel are slightly brought together, then it is inserted into the metal curved hangers of the base so that the bars enter the grooves cut out in the edges of the pallet. The panel should fit into the spacer, making the structure rigid.
	If it is necessary to reduce the weight of the structure, then the 0.75 mm thick panel can be replaced with a thinner metal sheet. This process will not be difficult to carry out, since the panel is not welded to the reinforcing elements. However, cut from sheet metal the pallet will have sharp edges. For safety reasons, before installing it into the base, the edges around the entire perimeter of the product should be beaded, wrapping them in the form of a tube. In the beaded edges, grooves are also cut out for inserting reinforcing bars of the base into them.

The stand shown has been field tested for a period of heating period and proved to be strong and comfortable design. The compact dimensions of the wood burner are convenient for carrying and placing the stand near the stove or fireplace. Upon completion winter period in order to save space in the utility rooms, if desired, the firewood rack can be disassembled into components.

equipping Vacation home and heating system with solid fuel, sooner or later everyone thinks about firewood for fireplaces and stoves. Under open sky leave no wood. Precipitation and capricious weather can destroy stocks prepared for the winter.

Firewood for giving

Therefore, to keep them dry and unharmed, you need to consider reliable system storage. Of course, you can transfer the entire supply of firewood to a barn or any household building, but the suburban area will take on a completely different aesthetic appearance if for firewood specially equip the firewood. This will solve the issue of storage, decorate the house and add comfort during operation of the stove or fireplace.

What should be the firewood for the fireplace and stove and how to make it yourself?

A firewood storage stand can be created from any material, but wood and metal are most often used. As improvised means for creating firewood can go concrete rings for wells, fittings, barrels - everything that is on suburban area. Look at the photo below, a minimum of metal and a large amount of firewood!

It all depends on where it is supposed to place the firewood - on the street or inside the house. We offer you several options for the construction of firewood, and you will already choose the most suitable design for yourself.

Firewood can be classified into four categories:

• for premises;
• for the street;
• portable (mobile);
• stationary.

Many, in the old fashioned way, prefer to use a regular shed for storing firewood. But experience shows that in such a room, where there is no constant air circulation, the firewood becomes damp, the tree rots. Yes, and a high probability of breeding rats and insects in such a barn.

A simple firewood rack looks much more stylish.

But no matter what material you choose for its manufacture, you must understand that no matter how stylish and decorative the firewood shed is, it must solve the following tasks:

1. Provide air circulation between the firewood.
2. Reliably protect logs from precipitation.
3. Provide convenient operation.

Outdoor woodshed appearance very much like a barn.

Only the walls should not be closed tightly for good ventilation, and the floor should be raised above the ground so that the fuel does not dampen.

For the home, more elegant forms of firewood are used.

Mini firewood for the room

You can build a beautiful forged openwork firewood of small sizes. It rather provides an aesthetic function here and for convenience only a few logs are placed in it. At the same time, such a firewood rack can be made stationary and mobile. For the manufacture of forged firewood, cold and hot method forging.

A room firewood rack should fit well into the overall interior design. Safety and ease of use will ensure its stability. Forged products add the same country gloss and zest, for which everyone strives to escape to the country.

At the same time, it can have the most intricate shape and have a very stylish minimalist look.

The design of the outdoor firewood storage will be completely different. When making a supply of firewood for the winter, you must take care of their safety until spring.

Here, for the construction of such a structure, you must be guided by the following rules:

Video. Some stylish ideas for outdoor firewood sheds.

For the construction of firewood, any improvised material is suitable. It all depends on your skills and imagination.

Can be welded small design from the corners and attach it to the wall of the house. Thus, it will not be necessary to close the back wall. From above, it will be necessary to cover such a woodshed with a roof to protect it from precipitation.

A simple method is the framework of wooden beams frame,. Covering it with a roof, as in the photo, you will reliably protect the firewood from rain and snow.

But there is one significant drawback - the lack of rear wall, because of which, in bad weather, all firewood can be flooded with water.

It is better to protect the structure with a metal shield from the profile. If you do not know how to cover such a firewood, then great solution become polycarbonate. Light freely penetrates inside, which means that the firewood will always be well dried.

A great idea for outdoor firewood storage would be ordinary concrete rings. The approach is very non-standard, but this option looks very stylish and original on a suburban area. In order to build such a woodshed in the country, you need to purchase ready-made concrete rings. You can’t do without assistants in construction, as they have an impressive weight.

In order to install such a structure, you need to decide on the installation site and prepare the base by filling it with gravel and compacting it tightly. Thanks to such a solid base, the rings will not be able to budge. A multi-level design will look even more impressive.

An alternative and very budget version of the previous firewood will be a construction from simple barrels. You can take just one barrel, put it on its side and securely fix it with wooden slats. And you can build a whole multi-level structure.

How to make a firewood for a fireplace with your own hands?

Today on sale you can find a huge range of stylish firewood from the very different material, which will wonderfully fit into any interior and provide convenient operation.

But it's always nice to do something with your own hands.

Of course, without certain skills and the appropriate tool, it will not work to make it with your own hands. If you want to make a firewood shed yourself, then we offer an easy way to create a firewood shed from plywood.

1. Firewood for the room

To make you will need the following materials and tools:

• plywood sheet;
• construction marker
• electric drill;
• jigsaw;
• 2 wooden slats. When all materials and tools are prepared, you can start construction work:

1. Take a sheet of plywood and draw a small ellipse 90 * 40 cm on it with a marker.

   

2. We cut with an electric jigsaw according to the intended landmark desired shape basics.
3. Step back with two edges of 5 cm and drill two holes with a drill (approximate diameter 3 cm).
4. Now to give the base a spherical shape, we need to make the plywood elastic. To do this, pour in large capacity(for example, in a basin or bath) hot water and put the carved base into the water. Leave for 1 hour.

   

5. Now you can give the plywood a bent shape. Do this very carefully and slowly so as not to damage the material. If you feel that the tree does not give in, you can lower it again into warm water for 20-30 minutes.

   

6. We insert a wooden handle into the previously made holes.
7. Outside, fix the handle with a dowel.
8. So that the firewood rack does not swing on the floor like a cradle, we give it stability with the help of two rails. To do this, we attach them to the base with self-tapping screws.

This design is simple and at the same time convenient to use. You can easily move it to the place you need.

2. Portable mini firewood for the stove

Stocking up on firewood for the whole winter is, of course, good.

But after all, no matter what stock you place in the woodshed at home, sooner or later you will still have to go outside for the next portion. To make it convenient to carry firewood, we propose to build a simple mini firewood rack. It is not difficult to make it even for a beginner, but this option looks very stylish.

From materials and tools you will need:

• 2 metal rods with a diameter of 5 mm.
• 4 metal rods measuring 15 cm.
• Welding.

Work order:

• Now we need to stiffen the whole structure so that it can withstand the weight of firewood when carried. To do this, we toughen our firewood with additional metal rods - 4 pieces. The size of such rods depends on how far you spread the two circles. We weld them parallel to each other, as shown in the figure.

After that, you can paint the firewood shed to protect it from corrosion and give it a more beautiful look.

The video shows in detail how such a miniature firewood can be built from ordinary metal rods.

Video. Forged mini firewood with own hands

3. Option firewood from an old barrel

Another firewood option that can be used indoors and outdoors. An empty barrel is suitable for this.

4. We build a firewood shed for the street from wood

The budget option for building a woodcutter in the country will be both wooden and metal structure. But the metal firewood has a number of disadvantages. The metal will not provide the necessary circulation of firewood, which means that there is a threat of high humidity and rotting of the wood.

Therefore, we propose to consider a simple and very economical option wooden frame buildings.

Consider the slope of the roof, which will ensure the drainage of rainfall. The height of the wooden poles must be initially different and take this fact into account. The minimum height difference should be 13-15 cm.

Video: How to make a firewood for the street with your own hands

A reliable storage for firewood is ready and now you can not be afraid of a cold winter!