V Lately sliding wardrobes are becoming more and more popular. They are compact and convenient for storing all the things you need in everyday life. Behind the sliding door is hidden not only clothes, but also shoes, accessories and even the necessary household appliances. This allows you to save a lot of space in your room due to rational use every inch of your room.

The sliding wardrobe can be installed not only in the bedroom, but also in the living room or corridor. It does not take up much space, so it will fit even in a small apartment. All these characteristics are relevant for a simple and inexpensive wardrobe Basya, which will be discussed in this article.

Characteristics and features

This wardrobe is great for those who are on a budget and are looking for an inexpensive wardrobe with compact dimensions. This model costs two or even three times cheaper than its counterparts, but it also looks good and lasts no less. It is available in several basic colors, so you can choose for yourself a cabinet that will perfectly fit into any interior you choose. The closet is spacious enough, so you can fold and hang in it not only things from your basic wardrobe, but also what you don’t wear or don’t use at the moment.

The only drawback that almost all buyers note is the difficulty in assembling it. More precisely, the lack of a simple and clear instructions, which explains in detail how and in what sequence to assemble Basya's wardrobe.

How to mount

The easiest way to deal with all the complexities of installing Basya wardrobe is to entrust this process to professionals. But, if you do not want to spend extra money, or are simply used to doing everything yourself, then you can try to mount your furniture on your own.

This process begins with the installation of the frame. All structural details are marked with a special number, which is also indicated on the drawing. The assembly of the wardrobe body begins from the bottom corner. To do this, one of the side walls is attached to the bottom. A parallel wall is installed nearby. The installation is completed by fixing the roof.

When the frame is ready, you can nail the back wall to the base. Chipboard sheets fastened with self-tapping screws. They begin to fix from above and fall down. It is necessary to fix the back wall both from the outside and from the inside. After completing this process, it is advisable to check whether all the parts are evenly fixed - an installation error can significantly reduce the life of the cabinet.

Having fixed the main parts, you can fix individual shelves inside the cabinet. To fix five shelves, you will need self-tapping screws, wood dowels, glue and a drill. Main advice, which is worth remembering when installing shelves - you need to start from the top and move down. When installing shelves, pay attention to the fact that their front edge is in front, and not rough raw edges.

The hardest part is installing the door. sliding mechanism wardrobe doors must be installed so that the door opens and closes well. It depends on how correctly the mechanism is installed, how convenient it will be for you to use the closet. All rollers and fixing elements are included with the main parts. In addition, there is also a mirror for the facade on a film basis. Finally, after all these procedures, close all visible holes with decorative plugs that come with the kit and check the build quality.

You can determine the quality assembly of the Basya wardrobe by several simple details. First of all, a well-mounted cabinet stands flat on the floor, without tilting anywhere. There are no gaps or openings in the attachment points. And the compartment door slides smoothly when opening and closing and does not make any extra sounds. A properly installed cabinet can be moved to the desired area and start filling it with things.

6253 0 0

Do-it-yourself wardrobe assembly scheme in 5 steps

Out of a desire to save money, people often buy disassembled cabinet furniture in the hope of assembling it themselves. Indeed, there are instructions in any kit, but in reality, the sliding wardrobe assembly scheme has many nuances, and so that at the end you don’t have “extra parts” and the cabinet turns out to be durable, we will analyze the whole process in detail and for convenience we will break it into 5 steps.

Tool and preparation for assembly

You won’t need too many tools, but you won’t be able to get by with one screwdriver either, manufacturers give out a kit with 90% readiness, the remaining 10% are written off for fitting furniture to a specific place.

Confirmed key, manual hexagon (often included);
Steel hammer;
Rubber mallet;
Screwdrivers - Phillips and straight;
Roulette;
Awl;
Confirmed drill;
Drills for metal - 4 mm and 6 mm;
Screwdriver;
Square;
Pliers;
Level (regular bubble).

Now we need to prepare workplace, on the assembly site, the cabinet should fit in any position - along, across, diagonally, and even lying down. All this is necessary so that you can fix the back shield from fiberboard, and then get out of there and slide the cabinet into the place intended for it.

Do not rely on the fact that the set is fully equipped, be sure to check the availability of all the details when buying, the furniture is assembled manually at the factory and the human factor must be taken into account.

Assembling a closet in 5 steps

Furniture in the public sector is made either from chipboard or laminated MDF, it is not difficult to assemble these cabinets by hand, but it is advisable to take care of an assistant, at least for support.

Step 1: Base Assembly

In this case, we need to install the legs on the base plate and fix the fittings for subsequent installation. vertical walls closet.

Illustrations	Recommendations
	Legs marked. In some models, the legs are not provided at all, they are installed on stands made of the same chipboard, but more often there are adjustable legs in the kit. Here you need to look at whether holes are provided for these legs in the base plate, if they are there, then assemble them according to the diagram shown in the photo on the left.
	Legs not marked. This situation occurs in budget models. You need to mark the points for mounting and screw the legs with self-tapping screws to the base. According to the rules, on the front side the legs are installed at a distance of 70 mm from the edge, and from the back 50 mm from the edge.
	Mounting hardware. The vertical walls are fixed with pins for minifixes, the standard diameter is 4 mm, but there are other models.
	Pin mounting. There are pre-drilled holes in the base for these pins, you just need to take a tool and screw them in. The same pins are mounted in the top cover, in order not to waste time later, it is better to screw them into a rhinestone into both plates.

Step 2: assemble the body

If up to this point you could do everything yourself, now it's time to call an assistant. It is needed to maintain the walls in a vertical state. It is not worth fixing the cage to the base right away, first install the shelves so that the cage stays on its own.

Horizontal shelves are assembled using furniture confirmers, they are also called euroscrews. In ready-made sets, the holes for them are already drilled, you only need to insert the confirmant into these holes and screw tightly with a hex key, then cover the head with a plastic plug.

It is better to screw the confirmants manually with a key; when using a screwdriver, you can overtighten and strip the thread.

Now it's time to firmly attach the cage with shelves to the base and top cover. For these purposes, the so-called minifixes are used, they are something like a “pill” with an eccentric inside.

Furniture minifix diameter 16mm when you install vertical racks on the pins, the pin head will be visible in the side hole of the rack. A minifix is inserted into this hole and rotated clockwise.

Thus, the two elements are tightly pulled together. At the same time, the technology is the same, both for fixing the base and for fixing the top cover.

Step 3: back wall

The back wall in such cabinets is made of painted hardboard (dense fiberboard). Sheets are cut on machines, so there is no doubt about their forms, the problem is that the back wall is typesetting, that is, it is assembled from several sheets, so the assembly takes place in 3 stages:

First you need to check how smoothly you assembled the box. To do this, we use the old-fashioned way - we measure the diagonals. The size of both diagonals must be the same. If something is wrong, we check the tightness of the minifixes, usually small deviations are caused by an uneven screed;
Now call an assistant and ask him to hold the box in the right position (so that it does not skew in any direction). Apply yourself at this time bottom panel hardboard to the back wall and nail it to the racks with carnations or fasten it with small self-tapping screws;
Next, put on a plastic H-shaped connecting profile on installed panel and mount the next one in the same way. The minimum step for fixing panels on racks is 100 mm, well, this is already at your discretion, for example, in Soviet cabinets the back wall was fixed with self-tapping screws with a pitch of 30 mm.

Step number 4: installation of rails for doors

Before mounting the rails under sliding doors, the base of the cabinet should be set clearly on the horizon, with level control. This can be done with adjustable legs.

Illustrations	Recommendations
	Equipment. In budget models, roller doors are used based on the lower rail, rollers drive along it. Above are W-shaped profiles that control the movement of the door leaf.
	Fixing top profiles. All profiles come without mounting holes, you will need to drill them with a drill with a diameter of 4 mm. Then screw the profile with self-tapping screws to the top cover of the cabinet.
	We put stoppers. Stoppers are needed so that the door rollers are fixed in them and the doors do not move apart spontaneously. You just need to take the pliers and insert the latch into the groove of the profile.
	Bottom profile fixing. The instruction is similar: drill holes with a diameter of 4 mm and fasten the profile to the base with self-tapping screws (the stoppers should already be in place).

Sliding wardrobes thanks to the thought-over design save a huge amount of usable space. Cabinets - coupe "Basya" showed themselves especially well.

How to assemble a closet?

The assembly of the Basya sliding wardrobe does not present any difficulties for a person who knows how to handle the tool. Such furniture can be placed not only in the bedroom, but also in the country or in the hallway, everywhere this furniture will look completely at ease and organically.

"Basya" perfectly matches the format of budget furniture. Compared to other Basya models, it costs two and a half times cheaper, while it also looks very presentable.

Instructions for assembling the cabinet are attached to each unit of the product, but there are still difficulties in its layout from time to time, especially in the question of how to assemble a wardrobe for a beginner. In addition to the manual, it is recommended to watch video materials on the site, which shows in detail how to assemble the Basya wardrobe.

Scheme of the cabinet "Basya"

The cabinet "Basya" is assembled as follows:

The frame is installed first. All cabinet nodes are marked and numbered, so it will be easy to work. Assembly starts from the bottom corner. The side wall is connected to the bottom using self-tapping screws, another wall is installed in parallel in the neighborhood. Before that, it is better to look at the photo in the instructions.
After the frame is assembled, the back wall comes into play, which is attached with small nails to the assembled base. Also, instead of studs, 3 mm self-tapping screws are often used.
The product should be assembled from top to bottom, the wall is fixed on both sides, it gives rigidity and stability to the entire structure. It is very important to control that there are no distortions. For these purposes, use the following tool:

construction square;
good meter level;
roulette;
plumb.

If there is the slightest distortion, then the door will not close well and it will be impossible to fully use the cabinet.

1 2 3

The assembled frame is prepared, which means it's time to attach the back panel, it is attached both from the outside and from the inside. After the end of this assembly phase, it is recommended to test: how smoothly all the elements are fixed, and if something is done incorrectly, this will negatively affect the operation of the product, and the service life will be noticeably reduced.

After the frame is installed, the installation of the shelves begins. They are fixed with the help of special cylindrical wooden blocks, which are called chopiks. Moment glue, self-tapping screws, dowels are also actively involved. It should be noted that all markings are on standard parts, so the process of installing blocks does not present any difficulty.
The crucial stage is the layout of the door. It is very important that there are no distortions, then the door will normally close and open without effort. In this case, it is important to set the guides correctly.
After the door is installed, a mirror is mounted on it. How to fix the mirror, it is recommended to look at the assembly diagram of the Basya wardrobe with a mirror.
After the assemblers have finished the main work, you can put the fittings.

As you can see, the description is quite accessible even for a primary school student. You can determine the correct installation of the Basya wardrobe by some characteristic features:

the product is based on the floor, without any distortions;
there are no gaps at the joints;
The door opens and closes silently without any effort.

After making sure that everything is fine, the Basya cabinet can be safely operated by loading it with contents.

Self-assembly of furniture helps to save a lot cash. It is good if a person has simple skills in assembling objects. It will be useful for beginners to learn how to assemble a sliding wardrobe on their own. step by step installation of each element of the product will allow quick installation.

Among all types of products for storing clothes, the sliding wardrobe occupies a leading place today. It is multifunctional, roomy, available in different forms and dimensions, and also does not require additional space for opening doors. That is why most people, when choosing between a wardrobe and a wardrobe, prefer the latter option.

Assembling a sliding wardrobe with your own hands on the video presented is quite simple - for this it is enough to have in the apartment necessary tools and be familiar with the design of the product. Often, when ordering a cabinet without the services of assemblers, companies send a document containing a drawing of the product. It also lists all the component parts, which are numbered in order. Looking at the picture and comparing the elements of the cabinet, you can intuitively assemble the product.

To work according to the wardrobe assembly scheme, you will need the following tools:

building level– to check the evenness of the installation parallel to the floor;
corner;
rubber and regular hammer;
straight and Phillips screwdriver;
roulette;
pencil and ruler;
screwdriver;
wood drill - to make holes;
drill for metal - for installing an aluminum base.

Of the additional tools for assembling furniture, a jigsaw, a drill and sandpaper can come in handy. It is also necessary to prepare all the details of the cabinet, which means checking the diagram for the correct number of items. Pay attention to fittings and mechanisms: if there are drawers in the closet, ball guides should be included in the package.

Doors for the product are often supplied ready-made. They are pre-installed with rollers and a strip soft material. It is necessary to mount the door in the final phase.

Tools

Assembly steps

To know how to get started, you should familiarize yourself with its stages. Most sliding wardrobes are assembled according to the following algorithm:

plinth;
frame;
installation rear wall;
installation of shelves and guides;
sliding door installation.

After the completed stages, the implementation of internal additional elements. These include pull-out baskets, drawers, rods, hanging hooks and pantographs. Consider the installation of each element of the cabinet separately.

Assembly steps

plinth

The assembly of sliding wardrobes, the video of which is presented below, starts from the bottom, which accounts for the entire load during operation. We find a part that will perform this function, and put it in front of us. In order for the process to go correctly, we use tools such as screwdrivers or a screwdriver, a hexagon, a pencil and a tape measure for marking. Also check the package for the presence of self-tapping screws and special camouflage plugs.

The algorithm of actions looks like this:

on the details for the bottom, a place is marked for installing the base;
sometimes, instead of plinths, adjustable legs are used, a place for which also needs to be marked;
drill holes for fasteners;
we attach the bottom to the slats with the help of confirmations (corners) - for this, self-tapping screws and a screwdriver are used;
we assemble the transverse supports of the base, designed for stability.

Some products, such as phoenix coupe models, require installation with adjustable feet. This is easy to do: the plastic plugs are cut off with a knife, and the legs themselves are screwed into holes prepared at the bottom with a diameter of 10 mm.

Depending on sizes assembled cabinet coupe, the number of legs will be regulated. So, for large planes, more than 6 support elements will be required.

Preliminary marking of the cabinet base

The base is easiest to assemble on furniture metal corners

Installing the legs

Finished plinth with legs

Frame

Before disassembling and assembling wardrobes from scratch, it is important to familiarize yourself with general structure existing product. Carefully study the diagram, because the assembly of the case should provide safe operation closet. From how securely it is installed, the stability of the internal elements will matter.

In order for the assembly of furniture to be accurate, you should additionally check the floor surface for evenness. Use the building level: if there are differences on the floor, tighten the adjustable legs. Only then assemble the product box.

To properly mount the case, follow these steps:

it is better to assemble the product while standing, because it is very difficult to mount a perfectly fitted cabinet in a lying position. But it is important to remember that for a complete assembly, a minimum of 100 mm must be left for roof mounting;
in the part that is responsible for the bottom, you must first drill a few holes and insert the anchor. Rack strips will be mounted on the installed fasteners;
installation of standing panels is carried out together: in order not to get confused, you can view the instructions for assembling the sliding wardrobe, presented in the video. First, the left sidewall is inserted, one person holds it while the second one inserts the right sidewall;
on the next step the middle stand is mounted, if it is present. After its installation, the installation of the roof takes place. If the cabinet is assembled in a standing position, then this part will be fixed correctly on the corners or confirmations.

It is a little more difficult to assemble a maestro model wardrobe with many functions. Its installation is carried out slowly, preferably by several people.

Fastening takes place with euro screws

Installation of the side and inner walls of the cabinet

The base is connected to the body with the help of confirmatory corners.

Back wall installation

To assemble the coupe yourself, in particular, to attach the back wall of the product, you need to correctly choose Consumables- fasteners. Often, assemblers use incorrectly selected consumables, due to which, over time, the fiberboard panel moves away from the furniture product. In Soviet times, hardboard was assembled on the back wall with the help of nails, which is undesirable today.

For greater reliability, attach the fiberboard wall to the cabinet using self-tapping screws. This is how the product will not be damaged during operation.

When assembling furniture for yourself, it is important to carry out a high-quality assembly of the sliding wardrobe with your own hands: the video below clearly shows all the complex nuances. Perform the following manipulations:

put the hardboard panel behind the cabinet;
holding the sheet with your hands, use short self-tapping screws and use a screwdriver or screwdriver to screw them in at a distance of 10-20 cm.

If the cabinet has several rear walls at once, they must be fixed end-to-end. Use special tightening fasteners, then screw the screws onto the back of the middle bar.

Rear wall fixing

Installation of shelves and rails

In order not to have to disassemble the product and redo your work, check the reliability and stability of the frame, and then proceed to filling with internal elements: shelves, rods, drawers and guides. Study self assembly sliding wardrobe can be on the video, which is at the bottom of the article. It visually provides information about all important points process.

You should pay attention to such nuances:

shelves can be fastened using corners and self-tapping screws. For this, the parts themselves already have drilled holes. We first note the distance between the shelves and fasten them to the sidewalls and the central standing bar;
first, the upper rails for the doors are installed, after which the lower rails are mounted. It is worth emphasizing that the installation of these elements must be carried out strictly in a straight line - the correct course of the doors will depend on this;
the bar is installed on special flanges that come with it in the kit. If necessary, the length of the pipe is filed with a hacksaw for metal. If a Fortune model cabinet is being assembled, you should pay attention to a large number of elements and not confuse them;
drawers and drawers are inserted into the product after attaching the mechanisms for their operation.

Before you mount internal filling, check the availability of all accessories and consumables.

Guide sliding system

Preparing holes on the rails

Before installing the guides, it is necessary to correctly position the stopper

Furniture assembly services. We will assemble a wardrobe, a kitchen, a nursery ... of any complexity. We have experienced craftsmen with all the necessary professional tools.

Step-by-step instructions for assembling a sliding wardrobe

Assembling wardrobe. If you by purchasing closet, decided to save money on furniture assemblers, then this article with detailed instructions and some secrets will help you assemble a closet without the mistakes that beginners usually make. We hope that this article will save you not only time for assembly and disassembly, but also your expensive nerves. Sliding wardrobes have different designs, and how to assemble them may differ slightly. We offer you the most common and common wardrobe, assembly instructions which will help during the assembly of other models.

Wardrobe assembly tool

To assemble the wardrobe, you need a screwdriver, a screwdriver, a set of hex keys, a tape measure, and a clerical knife. Sliding wardrobe with three doors with sliding shelves and a bar for hangers
Cabinet plinth assembly There are two types of wardrobes, in some the plinth is screwed to the body separately, in others the side walls are the base of the plinth and are connected by a longitudinal plank-plinth. This cabinet has a separate plinth, which is assembled using Minifixes(furniture corners).

The indent should be the same on all sides.
Make sure the corners are 90 degrees. Usually furniture makers use self-tapping screws with a size of 4 * 16. Sometimes the plinth can be screwed a little closer to the front side if you have a wide plinth in the room. We nail the support legs to the base. Sometimes the manufacturer completes the cabinet with adjustable legs, with which the level of the cabinet is adjusted.
Cabinets are assembled for convenience mainly in a lying position, so it is recommended to provide enough space for mounting the cabinet in advance.

Assembling the cabinet body

Follow the enclosed instructions carefully. All parts and fasteners have their own designation. It is very important not to confuse the body parts, which at first glance are the same and may differ by only two or three holes. Otherwise, when the cabinet is almost assembled, you will have to disassemble it again and put the parts in their place. Lay the pieces of the side walls parallel. Important! Be careful not to confuse the top and bottom of the parts, as well as the front side with the back. Front side always has an edge, the back can have a groove for the back wall of fiberboard.

This cabinet is assembled in the same way furniture fixtures Rafix. A part that looks like a minifix, but has a plastic case. We screw the rods from the rafixes into the holes intended for them and tighten them with an eccentric. Be careful until the cabinet body is assembled and the back wall is installed, all fastenings can be easily break out. Do not skew cabinet parts, keep even corners. Installing the rear wall of the cabinet. After the cabinet body is assembled, the connections are tightened, it is necessary to turn the cabinet over and lay it face down. In order not to scratch the front of the cabinet, it is advisable to put cardboard or a rag under it. You can use cabinet packaging.

Cabinet Diagonal

Before fixing the wall of the cabinet, you need to set the diagonal so that all corners of the cabinet are 90 degrees. To do this, you need to measure the two diagonals of the cabinet with a tape measure. They must be equal in length (See the diagram). Some cabinets do not have a groove for the back wall and it is simply nailed to the end. It is better to use self-tapping screws or a stapler with long hardened staples. Since the wall usually consists of two or more parts, at the joints there is a connecting strip. If there is none, then it is better to attach it to internal details stapler, since the thickness of the chipboard body is 16 or 18 mm, when you screw two pieces of fiberboard to it, you only have 9 mm left. stock. It is easy to miss with a self-tapping screw and go past the end of the part, where the back wall is connected and screwed.
Now the cabinet can be placed. Lifting is best done with an assistant. It's easier and safer that way. When the cabinet is installed in its place, you can mount the shelves. For this, either shelf holders, or corners, or rafiks are provided. We screw the rods of the raffixes into the sockets under them and lower the shelf on top of them. It is easier to start installation from the top shelves.
We fasten the roller guides. Self-tapping screws should not protrude so as not to interfere with the course of the rollers.
Insert the assembled boxes into the guides. They should slide out easily without rubbing. We fasten the flanges for the rod. Usually there is a markup for self-tapping screws. If not, then it is necessary to step back from above 7-10 cm, enough to be able to hang hangers.

Installation of wardrobe doors

Now that the cabinet is almost assembled, it remains to install the doors. It is desirable to pre-adjust the level of the cabinet. Otherwise, the doors will not close tightly.
To install the top rail, you need to drill at least 5 holes for self-tapping screws, two on each side and one in the middle. The guide should be aligned with the edge of the cabinet lid.
To install the lower guide, it is also necessary to drill three holes with a diameter of 4 mm, and chamfer with a larger diameter drill so that the head of the self-tapping screw is flush with the guide. Sliding wardrobe guides different manufacturers require a different indentation of the edge of the cabinet. To simplify the installation, you can simply put the guide on the installation site, and fix it when the doors are installed.
Installing the door in the rails. First, the upper rollers are inserted into the upper guide and raised to the stop, then the lower rollers are inserted.
First, two side doors are inserted into the second track, then the middle door into the first track.
The doors are adjusted with a hex wrench (sometimes with a “cross” screwdriver). When correctly set, the door should fit snugly against both walls of the cabinet.
Now you can glue the sealing brushes. First, the protective film is removed. Attention, after removal protective film It is not recommended to touch the place where the brush will be glued with your hands. Oily fingerprints will make the brushes stick worse.