Preparing windows for winter: one day for the longevity of a plastic window. We translate plastic windows into winter mode correctly How to put plastic windows in winter

The instructions contained in this article will help you find out what position the pivot is in and figure out how to switch the windows to winter mode without having to call the master at home. The text contains an overview of the features and characteristics of window fittings, advice on its use and correct adjustment, as well as visual videos and photos with a clear description of this procedure.

Reinforced plastic double-glazed windows are widely used for glazing apartments and private houses. Such designs have the ability to make adjustments and set the degree of sash pressing. Thanks to such adjustment of PVC windows, the system can be switched to winter or summer seasonal mode. This feature is very convenient, although not all owners know about it.

The availability of the adjustment function depends on the type of fittings used. This feature is not inherent in every type of windows, but only in modern modifications. There are several modes. Each of them has its own characteristics.

Standard, summer and winter modes of plastic windows

The standard mode assumes the middle position of the sash pressing. This means that the eccentric will be located in the middle. Window construction installed in this mode, in most cases, is able to work effectively both in winter and in summer. This ensures the optimum pressure level of the sealing material.

In winter mode, the windows are characterized by a tighter fit of the sash to the frame. Due to this, in the cold season, metal-plastic structures effectively retain heat, keeping it indoors.

Summer mode is characterized by a less tight sash fixation. In this position, air currents circulate freely between the environment and the room. In other words, the effect of micro-ventilation is ensured, due to which optimal microclimatic conditions are maintained in the heat.

Note! The use of the summer mode allows the sash to be weakened as much as possible, which has a positive effect on the condition of metal-plastic windows that have survived the long winter. At the same time, it remains possible to protect the room from dirt, dust and heat.

Why is it necessary to adjust plastic windows for summer and winter mode

The transition from one mode to another allows you to keep the window structure in a functional state and extend its service life. Adjustment involves changing the degree of fit of the sash to the window frame. In the winter season, the insulation material shrinks, and in the summer it expands. It, like all fasteners, can be protected from wear with the help of adjustments, video and photographic materials with instructions describing how this can be done, on the network it is enough.

Sometimes during operation, the sash is displaced. When it is warm outside, this does not cause inconvenience, however, in winter, this can cause the temperature in the room to drop significantly. If this happens, check the condition of the frame. During the installation of metal-plastic windows, the masters check the position of the sashes in each of the modes, as well as the absence of gaps between the parts. However, a perfectly executed installation is not a guarantee that the sashes will not disperse over time.

If the windows are installed in early spring or winter, the structures are exposed to external influences:

The outside temperature rises.
Under the influence of climate change, plastic begins to expand.
The temperature outside is dropping.
Under the influence of temperature changes, the plastic decreases in volume, while it is not always able to take its original shape.

Similar processes occur if windows are installed in the summer. But at first, the material shrinks as temperatures drop, and then expands. At the same time, it is impossible to avoid changes in the technical characteristics of the product, therefore, gaps often appear in the windows.

The need to transfer plastic windows to winter or summer mode may be due not only to seasonal transition, but also to a number of other reasons:

Drafts from the window, carrying frosty air and dust in summer in winter.
Sagging of the leaves due to wear on the hinges.
Sash jammed in ventilation mode.

Note! During the operation of windows, the sealing material is subject to severe wear. Therefore, it is very important to carry out in a timely manner when switching to winter / summer modes do-it-yourself adjustment of plastic windows.

How to check the possibility of adjusting plastic windows for the winter

The ability to switch between summer and winter modes is provided by special fittings. The availability of this function depends on the class of these parts.

There are several types of components:

Low-cost hardware - parts that have the lowest cost and are solely responsible for opening and closing the window structure.
Standard fittings - the complete set contains standard and anti-burglary parts that allow you to prepare the window structure for summer or winter.
Specialized fittings - includes anti-burglary and specialized parts that allow transferring plastic windows to winter or summer mode.

Most modern manufacturers produce standard and specialized fittings with the function of switching from one mode to another.

How to determine which mode of plastic windows is set: winter or summer

Before adjusting plastic windows for the winter, you should establish in which position the fittings are installed. There are several ways to help you know how the sash is positioned. In each case, the technique depends on the shape of the pivot.

How to determine the winter mode of plastic windows before setting up the fittings:

A sheet of paper is taken.
It is placed between the sash and the window frame so that one of the ends remains on the side of the room.
The window closes.
Then you should pull the sheet towards you.

If the paper passes easily, then the structure is set for operation in summer mode. Otherwise, it will tear.

Helpful advice! Manufacturers of metal-plastic structures advise to operate windows in summer mode all year round. If there is no reason for the transition to the winter position of the sash, this procedure is not necessary.

In addition, there is a way to visually determine whether the winter mode is set on plastic windows, photo examples with markings can be easily found on the Internet. According to this method, it is necessary to find a marking in the form of a dash, an asterisk or a dot on a round trunnion. Next, you should determine the direction of this mark. If the marking points towards the room, it means that the summer operation mode is set on the windows. If the mark looks towards the street, then the design is set for winter mode.

Related article:

Causes of the problem, types of malfunctions, ways to eliminate them. Tips for preventing door breakage.

Pins are not only round, but also oval. The operating mode in this case is determined by the nature of the eccentric placement. If it is turned vertically, then the windows are set for summer weather. In the horizontal position, the pin presses the sash against the frame as tightly as possible, which indicates the winter mode.

Having determined the position of the sash, you can proceed to solving the question of how to transfer the windows to winter mode, video instructions describing this procedure are presented on the network in large numbers.

How to adjust plastic windows in winter / summer modes: video review and description

To find out how plastic windows are regulated, it is advisable to read the manufacturer's instructions, study the descriptions and videos, which can later be used as a visual aid. If the work is carried out without the help of a specialist, it is very important to fully understand the essence of the issue and act as carefully as possible, since there is a risk of imprudent movement to ruin the fittings.

How to put windows in winter modeoperation: photoand a description of the preparatory stage

Preparing a window for customization begins with cleaning. To complete this procedure, you will need a certain set of tools and accessories.

This list includes:

a mop equipped with a telescopic handle;
means for cleaning window panes;

paper napkins or towels;
means for cleaning fittings;
silicone based lubricant;
brush or hard brush.

Helpful advice! If you constantly look after the double-glazed windows and keep them clean, before adjusting the plastic windows for the winter, you will not have to spend a lot of time preparing them.

The preparation of the window structure is as follows:

glass is washed out;
the frame is wiped;
dirt on joints and joints is removed;

the fittings are thoroughly cleaned with a brush or hard brush;
all window elements are wiped (especially areas with grease);
by applying a few drops of silicone grease, the fittings are processed;
the position of the journal is determined;
the trunnion is set to the required position;
grease is reapplied;
all hinges are lubricated.

After all the above manipulations have been completed, the result is checked using a sheet of paper.

How to put windows in winter mode: photoand recommendations

To adjust the fittings on the glass units, you will need a special tool. Experts recommend that you have with you:

Pliers.
A screwdriver.
Hex wrench.

The necessary tool should be purchased immediately after purchasing the windows, as the need to configure them may arise suddenly. Sometimes the eccentrics do not protrude outward, and many owners search the network for videos on how to adjust plastic windows with similar features. The secret is to pull the trunnion outward. After that, it can already be configured. When the eccentrics are in the required position, they must be recessed into the sash again.

Experts do not recommend changing modes in the first year of windows operation. In new designs, the sealing material has not yet been subjected to wear, therefore, the mechanical loads on the fittings should not be increased and adjusted. If winter in the region does not differ in too low temperatures, it is allowed to operate double-glazed windows in summer mode. At the same time, the winter adjustment should not be left for the summer, since in such a mode, accelerated wear of the seal will occur.

Note! It is allowed to change the regime no more than 2 times a year. Moreover, the length of the winter period of operation is much shorter than the summer one.

Setting up plastic windows: how to adjust the sashes horizontally and vertically

Regardless of the mode of operation, it is not allowed that the sashes of the structure are skewed. Sometimes you have to resort to correcting their position in order to correctly configure the fittings. Sagging or warping will shorten the life of the seal. For work, you need a pencil with a soft lead and a ruler. All manipulations with the window must be done very carefully, otherwise the plastic can be damaged.

Window preparation for sash adjustment:

The structure is closed.
The sash is traced with a pencil around the perimeter (marks are applied to the frame).
The window opens.
The distances are measured between the frame opening and the marked lines along the entire perimeter of the structure.

On all sides, the indicators should be the same. Slight deviation is allowed, but not more than 7 mm. If the level of the left edge is underestimated in relation to the right, or vice versa, you need to correct its position. To do this, you need to remove the decorative insert and tighten the screws that are installed at the bottom.

In some cases, it becomes necessary to raise the sash. For this, the upper screw is unscrewed by half. If the level of placement of the sash is too high, the fasteners are tightened by ¼ a turn. If it is clearly underestimated, the bolt is unscrewed by ¼ a turn. The flaps are horizontally adjusted by screws located on the hinges.

How to adjust plastic windows horizontally:

The window opens.
A hole is located, the configuration of which corresponds to a hex wrench.
The screw turns smoothly until the leaf is aligned to the desired position.
Check in progress.

To check the quality of the setting, you should close the window structure. If it is necessary to reduce the distance between the hinge and the sash, the hex wrench must be turned clockwise. If the distance between these elements is too small, then the tool is rotated counterclockwise.

Important! Strong horizontal displacement of the window is not allowed. The maximum allowable figure is 3 mm (on either side).

Possible problems with reinforced-plastic windows and how to solve them

You can check the quality of the work done not only with a sheet of paper, but also by ear.

A well-adjusted window behaves as follows:

nothing interferes with the free opening of the doors, they close freely;
there is no creak, grinding and other extraneous sounds;
all the screws holding the sash in the desired position are screwed in approximately the same;
along the entire perimeter of the window, the sealing material has the same thickness and shape;
after opening / closing the sash, the sealing material returns to its original shape.

Changing the operating mode of a design is sometimes accompanied by problems. If the roller does not turn, it may need to be pulled out of the groove in the retainer by turning it 90 °. If this does not help, the part should be lubricated with WD-40. This lubricant is in the form of an aerosol mixture in a can. It is designed for processing joints and threads.

If, when switching to winter mode, the drafts from the window do not disappear, then the service life of the seal has ended. Replacing this material is very easy. It is enough to remove the old seal from the frame and the grooves of the sash and insert a new one in its place (by hand or using a blunt trowel). Since the material is welded to the profile in the corners, you will have to cut it to remove it.

The information contained in this article clearly explains how to put windows on winter mode. Videos, photographs and detailed descriptions of the procedure allow you to fully understand the peculiarities of adjusting double-glazed windows. Using this data, you can quickly and easily provide warmth and comfort in your own home when it is cold outside.

On the one hand, such manipulations promise advantages, reducing heat loss through the window structure, and on the other hand, as a result of adjustment, the seal wears out quickly.

How to transfer plastic windows to winter mode: video-instruction

Windows do not allow extraneous noise from the street to enter the apartment, provide the required air temperature in the room. After installation, plastic structures require periodic maintenance. First of all, you need to figure out how to transfer windows to winter mode, why is it necessary, when to carry out such procedures. In addition, it is important to study the principle of operation of locking mechanisms, which have a number of functional features.

Do not forget about this wonderful mode in winter!

Window modes

In the absence of theoretical knowledge and practice, it is advisable to contact specialists. They can give professional advice on the backlog of issues and offer the best solutions to problems.

There are three modes on plastic windows, with the help of which the sash pressing force is regulated. Among them:

Summer - the sash is pressed weakly. This position promotes air circulation in the room. The sealing rubber is subject to minimal wear.
Winter - provides a fairly tight hold. There is no movement of air masses, due to this, heat is retained in the room. In this case, the maximum load on the seal is carried out.
The standard is the middle position. Installers often leave structures in this form. The difference is that real professionals explain to the owners how to transfer windows to winter (or summer) mode, and unscrupulous ones do not consider it necessary to tell this. This position is intended for the off-season.

In this video you will learn how to adjust plastic windows

Pros and cons of switching

It is enough not to put plastic windows in winter mode for 2-3 years, so that even after adjusting it, it starts to blow from the window sill or balcony door. There are a number of problems that may arise if the Euro window is incorrectly adjusted. The main one is violation of the microclimate in the room.

Excessive humidity causes condensation on the walls, frames and double-glazed windows. All this leads to the formation of mold. Summer mode in winter leads to significant heat losses, it becomes necessary to heat the room additionally, which is fraught with an increase in the cost of paying for electricity or gas.

If you use the winter position in the summer, it will lead to quick wear of the rubber seals. As a consequence, any subsequent adjustments will be useless. The way out of the situation is to replace the seals, which are expensive.

Do not use winter variations of the use of windows in the summer.

Disadvantages of window adjustment can appear with improper manipulations that the owner carries out on his own. If done correctly, changing modes will be beneficial. First of all, you need to figure out in what situations switching will be justified.

Timely change of position increases the service life of the windows, even if such manipulations have not been carried out for a long time. Drafts in winter or dust in summer due to worn-out seal can be eliminated by rearranging the structures "for the winter". This will postpone repairs by one to two years. Loop slack can be removed in the same way. Replacement of fittings is considered an extreme measure.

Types of eccentrics

Not all plastic windows can be converted to modes. To figure out whether there is such a system on specific double-glazed windows, you need to pay attention to the locking mechanism. The eccentric located in the middle may be oval. In addition, there are parts that have a hexagon hole in the center. This indicates the presence of a winter regime in window structures.

The algorithm for adjusting plastic structures with different types of fittings is identical, only their position differs. Before starting work, you need to study all types of trunnions:

Oval parts after installation are often located diagonally - this is the standard position, the middle between winter and summer mode. Horizontal position means "winter", vertical - "summer".
On a round trunnion for a hexagon, you can determine the position as follows: if the part is extended in relation to the street, this is winter mode; centered - standard; recessed towards the premises - summer.
The third option is a round hexagon eccentric, but it does not move when rotated. This type of fittings is equipped with a mark indicating the position of the windows. The meaning is similar to the previous variant: if the label is located towards the street - "winter", towards the room - "summer", in the middle - "standard".

There are several types of tools for regulating the winter mode.

Preparatory work

Before adjusting the fittings of plastic windows for winter mode, it is necessary to do a number of additional manipulations. First, remove the grease from the locking mechanisms with a rag. This is necessary so that dirt and dust do not get inside during the adjustment process. After the procedure, you need to restore the layer of lubricant.

Then you need to find all the eccentrics, the number of which depends on the size of the window. If there is a mosquito net, you need to dismantle it, rinse it and set it aside until heat arrives.

Before the onset of cold weather, the seal should be treated with silicone or glycerin grease. Experts recommend giving preference to silicone-based sprays, which can be purchased at automotive or household outlets.

Many craftsmen believe that to switch accessories from "summer" to "winter" should be when drafts are felt. But this option is optimal for those areas of the country where a warm climate prevails. The most suitable time is the beginning of the heating season. In addition, misted glass or frozen ice on the inside of PVC windows indicates the need for adjustment.

Before changing the regime in plastic structures, you need to carefully examine the rubber parts. There are situations when the fittings are adjusted correctly, but the seal has become unusable (torn or cracked). In such a situation, it is imperative to replace it. You can buy cheap products for one season, but they will not last more than a year.

After a detailed study of the fittings and methods of its translation, you can proceed to the adjustment itself. For example, over time, a window frame can warp, causing one side to fit more tightly than the other. This situation is unacceptable, because an additional load is created on all components and drafts appear, so it is important to set it up correctly.

You need to start adjusting the sash horizontally or vertically from the bottom hinge. To do this, it is necessary to remove the protective plastic strip and find a screw with a special hex hole, which is located at the top.

When turning the part clockwise, the frame will rise, when turning counterclockwise, it will lower. To move the sash closer to the frame or, conversely, place it further, turn the screw that is located at the bottom of the hinge.

Step-by-step instruction

Having understood the theory, you can proceed to the practical setting of window structures. A step-by-step guide on how to transfer plastic windows for the winter:

After opening the sash, find all the pins, there are three of them on standard windows. If the marker is closer to the street, it must be translated in the opposite direction so that it is located towards the room.
For work, you will need a suitable hexagon in size, often a 4 or 6 mm tool is used. It is advisable that during the manipulation there is a set of different keys at hand, because thin products will be needed for vertical and horizontal adjustment.
Having picked up the tool, proceed to turn the trunnion. Carry out similar manipulations for the remaining eccentrics. Then check the tightness of the sash to the frame.

Regardless of the frame design, setting up is not as difficult as it might seem at first glance. It is important to follow certain rules and follow step-by-step instructions. If the windows were installed not so long ago and are still under warranty, it is better to call a specialist from the company that was engaged in the installation. Such a procedure is free, but one cannot hope that everything will be done perfectly, one should not exclude the possibility of self-finishing the structures. After adjusting at least one sash, subsequent maintenance can be done by hand.

Today, almost every home is equipped with plastic windows. Of course, this greatly simplified the lives of many residents. Reinforced-plastic structures are strong, easy to use, reliable and durable. However, all these advantages do not negate the fact that plastic windows, like ordinary ones, require constant care. So that they serve you faithfully, save heat, protect from blowing, they need to be repaired in time, as well as to carry out the necessary maintenance.

With the arrival of the cold season, you need to make sure that the plastic windows are ready for winter. Proper preparation of windows for winter is, albeit not very difficult, but still an important event. If it is not carried out in advance, then metal-plastic structures simply physically will not be able to give what the owners expect from them.

So, the preparation of plastic windows for winter is conventionally divided into three stages.... We will talk about them now.

Checking, cleaning and lubricating

In order for any mechanism to serve for a long time, it must be looked after and not allowed to get dirty. Likewise, plastic windows should be thoroughly washed before each season change. This should be done with a regular sponge and gentle detergents. It is necessary to wash the glass itself, slopes, profiles, window sill, sashes - everything related to the metal-plastic structure. Moreover, this must be done from two sides. Proper preparation of PVC windows for winter also includes cleaning the drainage channels. If this is not done, then in the autumn-winter time, water will begin to accumulate here.

Now you should pay attention to the fittings... What to look for there? Dirt and old grease mixed with dust. All fittings must be well cleaned of grease, dust and dirt. After that, it must be washed. After all the moving elements of the mechanism are clean, you can safely start lubricating. You can use both imported and domestic grease for window fittings. Also, ordinary grease is suitable for these purposes.

Important! Never use edible oils to lubricate the hardware. The fact is that they dry out rather quickly, after which they turn into a sticky semblance of sandpaper. In such conditions, the window mechanism will not work for more than a year.

Do-it-yourself preparation of plastic windows for winter includes one more stage - checking the sealing gum... If the window began to let in noise from the street, if it began to see through from under the sash, if dust and dirt from the street began to accumulate on the windowsill, then the sealant has probably fallen into disrepair. In principle, you can try to revive it. This requires a thorough cleaning followed by lubrication. The processing of the sealing gum is carried out with the help of silicone grease or with the help of technical petroleum jelly. If you are wondering how to prepare plastic windows for winter, then try to start with a seal. In fact, really important functions are assigned to such a small rubber band. If the seal cannot be restored, then it is simple.

Do not know how to do this, and there is no desire to delve into it? In this case, you can turn to Teplo Home for help. The specialists of our company will not only replace the seal, but will also fully prepare the plastic windows for winter in Moscow and the region. You can contact an online consultant right now.

Prepare windows for winter: correct adjustment

Did you know that plastic windows need to be regulated both with the onset of cold weather and with the arrival of warm days? This is the so-called. Now we are interested in the first case: how to prepare plastic windows for winter by ourselves by means of adjustment. The main goal is to press the sash to the frame more strongly in order to completely eliminate the occurrence of drafts.

If your plastic windows consider themselves adjustable, and this can be determined by the presence of a hexagon hole in the trunnion, then, in principle, you can start transferring your metal-plastic structures to winter mode. And this is done quite simply:

The first step is to lift the hardware roller.
Adjust the clamping distance with the hex key.
After that, you should install the raised roller in place.
Further, this same video should be turned with a risk in the direction of the room.
These manipulations need to be done with all videos.
It happens that after the event for the transition to winter mode, the handle attachment weakens. To fix this, rotate the plastic plate next to the handle 90 degrees and simply tighten the screws.
It also happens that the handle begins to turn with difficulty after tightening. To fix this, you need to lubricate the entire hardware mechanism, for example, with machine oil.

Note... You can get to the lower and upper rollers, as well as from the roller on one side, only by opening the sash. As for the roller on the second side of the sash, you can get to it only through the "airing" position.

We insulate ourselves correctly

As you understood, preparing windows for winter does not end with just washing and adjusting, you can also use heavy artillery. If the window has begun to retain heat poorly and see through, then the first thing the owners will think about is insulation. However, this is not quite the right decision, because first you need to figure out why the plastic structure required insulation at all. Here are the most common ones:

The sealing gum has deteriorated.
The joint of the slope and the frame was depressurized.
The double-glazed window is depressurized.
The fittings require adjustment.

By eliminating all the faults, it may be possible to avoid measures related to the insulation of the window structure. High-quality repair and adjustment is the best preparation of plastic windows for winter.

If you are still serious about insulating the window, then a very good way would be use of film... Yes, the window immediately loses its aesthetic appearance, but it will be much warmer in the room in winter than it was before. This is due to a decrease in heat loss. The film can be attached around the entire perimeter of the window, both from the inside and from the outside. After fixing, it should be checked that the film is stretched evenly.

Help in preparing plastic windows for winter

If for some reason you cannot or do not want to prepare plastic windows for the cold season on your own, you can contact the specialists of the Teplo Doma company for help. Our masters will come to inspect everything and give a verdict. And you may not have to insulate the windows, because everything can be limited, for example, by adjusting or replacing the seal.

Now almost every apartment or private house is. This greatly simplifies people's lives, because metal-plastic structures are very durable, they are more convenient to use, they are more reliable, and the service life is much longer than that of wooden ones. But these advantages do not negate the need for special care, which will extend the operating time... Constructions, insulate, repair, etc. Preparing plastic windows for winter is an important point of operation.

When it gets colder outside, it is important to think about how to adjust the plastic windows for the winter. Proper preparation is not difficult at all, but very important. If you do not make a few simple manipulations, then the euro windows will not perform the functions declared by the manufacturer.

How to prepare double-glazed windows for winter

To extend the life of the mechanism, need proper care for him, prevention of pollution. It is important to know how . Before each season change, the structure must be thoroughly washed with a regular sponge and a mild detergent.

The glass itself is cleaned, as well as slopes, profiles, sash, window sill - that is, all structural elements on both sides. The drainage channels must be cleaned, otherwise water will accumulate in them.

Leak test

To check the tightness, between the frame and the sash a sheet of paper is inserted. You need to pull on it, checking the tension. When the leaf comes out easily, regulation of the sash clamping mechanism is required.

Important! It should be borne in mind that the tension of the sheet depends on the material of the seal.

Rubber will hold it tighter than silicone since they have different coefficients of friction.

To carry out an additional check, you can smear around the perimeter of the glass unit soapy water.

Bubbles will appear on the problem area due to the passing air flow.

If the seal allows noise and cold to pass through, most likely it has deteriorated and needs to be replaced or treated with silicone grease.

Dirt removal and lubrication

Do-it-yourself insulation of plastic windows for the winter involves inspecting the condition of the fittings. It should be thoroughly cleaned of dirt and dust mixed with old grease.

When all the mechanisms are clean, you need to reapply the lubricant composition - purchase a special one for metal-plastic structures or use grease.

Forbidden to apply edible oils for accessories - they dry quickly and become sticky, rendering the mechanism unusable.

Adjustment of plastic windows for the winter

Before the onset of the cold season, an inspection of the plastic structures and adjustment of the winter regime are carried out.

After installation of a double-glazed window, they are exposed standard criterion for locking sash, provisions are adjusted according to the seasons for increased functionality. Installers should explain to owners how to prepare PVC windows for winter and summer.

But it is the seasonal adjustment that is most often forgotten, the sash remains in neutral mode. The owners simply do not know how to tighten plastic windows. Over time, this provokes the following consequences:

drafts around the sash perimeter;
summer mode in winter does not provide a clamping mechanism for the locking mechanism, provoking loss of heat in room;
the constant setting of the winter mode provokes rapid wear sash;
lack of seasonal adjustment makes the air dry, condensation and even mold can form.

Adjustment methods

Window models can differ in fittings, thickness and strength of glass units. But there are some general principles on how to tighten plastic windows.

Setting up the entire rule is not that difficult. Before changing the mode, it is required to check the glass unit so that it has a special adjusting device.

As a rule, these are eccentric pins, they set in accordance with the location the pressing force of the sash.

Trunnions differ in appearance from different companies of window designs. But everyone must have an adjustment function. The translation is carried out using a 4 mm hexagon or an asterisk.

There is a risk at the edge of the eccentric - it indicates set mode. By default, it is put up - the neutral position. It should be changed according to the season.

Vertical and horizontal adjustment

To remove a slight bevel and frame shift, you need horizontal adjustment... It is done using the top and bottom hinges. It has holes for a hexagon. Bottom - allows you to customize the window from the outside and from the inside (that is, closed and open). As the key is turned to the right, the sash rises. If you rotate to the left, the lower part on the opposite side of the sash is lowered. The same actions are carried out with the hinge at the top, but manipulate only with the sash open. The shift should be no more than 2 mm.
Plastic structures can be adjusted and vertically- with the help of the lower hinge. First, remove the plug - so that the hexagon has free access to the hinge. The sash rises if rotated to the right, lowers if to the left. The range is no more than 2 mm.

Setting the position of the bottom corner

If the PVC does not close tightly from the bottom, then the sash should be moved with the lower hinge

Also on the hinge there is a second screw for adjustment - for this, the sash is placed on airing, a decorative overlay is removed from it, under which there will be a recess for a 4 mm hexagon. When turned clockwise, the sash rises, and against it, it drops.

Regulation of the degree of pressing of the flaps

How to check the degree of pressing has already been described above. Now you need to properly adjust it. This is done using eccentrics located along the perimeter of the fittings.

This is how PVC regulation is implemented in the winter. The setting can be done independently, it will not cause difficulties.

If the eccentric is moved clockwise, then the sash will press more against the frame. If on the contrary, then less.

There is a small strip on the eccentric, it will allow you to determine the pressing force. In summer, it is better to loosen the pressure, but setting plastic windows for the winter involves tightening to limit the supply of cold air.

How to seal plastic windows

Rubber seals help to obtain a tighter fit to the parts of the window structure. It is necessary to constantly maintain the cleanliness of the seal, to make sure that it does not appear for me cracks or holes... It is easy to clean it with a regular dry sponge or cloth, then grease it to prevent the formation of cracks.

In the case when the seal has completely lost its elasticity, a large number of cracks have formed on it - in order to prepare plastic windows for winter, need a replacement... If this is not done, the structure will begin to let air in from the street and will not protect against cold, noise and dust.

Replace seal you can follow the instructions below:

Open the doors, remove the old seal.
Process grooves, clean out dirt, small debris.
Insert a new seal starting at the top corner. It should be well established around the perimeter.
No need to pull rubber otherwise the angles will not match.

In order to properly insulate plastic windows for the winter with your own hands, you do not need to turn the eccentrics to the maximum when replacing the seal. This will provoke a rapid loss of elasticity of the new rubber.

How to close plastic windows for the winter

If PVC is classified as regulated, that is, the trunnion has hexagon entry- which means you can switch to winter mode. It's easy to close for the winter:

Raise the hardware roller.
Adjust the pressure with the hexagon.
Lower the roller into place.
Turn the roller with a notch to the side of the offset.
This should be done with each video.

Sometimes, after carrying out manipulations, the fastening of the handle of the structure weakens. To eliminate this problem, turn the plastic plate next to the handle 90 degrees, then tighten the screws.

If the handle is difficult to turn, you need lubricate the mechanism special oil.

Do-it-yourself window insulation

Setting up plastic windows in the winter involves replacing elements that have ceased to work correctly.

Bead replacement

When an air leak is localized near the glazing bead, it should be changed... Do it like this:

With a narrow spatula or a thin knife, the glazing bead is pushed on and pulled out.
The new one is matched to the size.
The new glazing bead is put into place, with a rubber hammer, and is driven into the groove by light tapping.

The new glazing bead is inexpensive: only 100 - 200 rubles. but this detail is very important, it is she who is responsible for the entry of street air into the room.

Replacing the retaining pad

During operation, the pad loses elasticity due to frequent and sudden temperature changes. You can replace it like this:

Remove the glazing beads.
Pull out the pads.
Dismantle the glass unit.
Remove the old tape and cut in the new one.
Re-assemble all structural elements.

Sealing joints with heat-insulating materials

Another effective method of insulating window structures is sealing seams, special joints.

If installed incorrectly, this is the only way to keep warm in the room in winter.

The main thing is to choose the right way to insulate plastic structures.

In the future, this can play a decisive role in the question of whether it will blow from the windows in winter.

You can insulate the structure to prepare plastic windows for winter such materials:

- affordable, differs in speed of application, but begins to deteriorate due to temperature changes and under the influence of ultraviolet radiation;
mineral wool is a refractory material, it is environmentally friendly, it is good for them to insulate a window sill or large gaps.
silicone sealant is a reliable material and affordable, but it does not have very good thermal insulation;
a special film is transparent, a double-glazed window is glued to us and helps to effectively retain heat;
polystyrene is the most affordable material, it is closed up seams on slopes;
construction tape - glued on top of a sealant, foam to increase the properties of thermal insulation;
warm mixtures - used to seal joints and seams outside.

Note! If there are even small gaps, it is better to insulate plastic windows for the winter in any specified way.

Video: preparing windows for winter

Output

The problems described in the article appear if installed incorrectly metal-plastic construction or with too long operation - more than 10 years. During installation, installers must explain the properties of the PVC structure and teach the owners to use it in different modes.

How to prepare plastic windows for winter?

Reinforced-plastic profiles are an excellent solution for glazing residential and premises. They perfectly protect the room from heat leakage, street noise, drafts and dust and have significant advantages over conventional wooden frames. A high-quality product can serve for 15 - 20 years without any problems.

In order to avoid unforeseen inconveniences during operation, it is necessary to periodically look after the pvc structure, namely: to transfer it to winter and summer mode in a timely manner. The main topic of our article is the preparation of plastic windows for the winter season. We assure you: it is not at all difficult and within the power of anyone, if you follow the list of recommendations below.

We start with cleaning

The first thing to do is to thoroughly wash the window. This means not only a double-glazed window, but also profiles, a window sill, plastic-trimmed slopes. We strongly advise against using caustic or abrasive detergents! They can plastic cover, leaving ugly stains on it that are darker or yellowish in color. Clean with mild washing gels.

For safety reasons, you should not wield a metal washcloth to clean the dirt - it will probably scratch the plastic, and its aesthetic appearance will deteriorate. You will need a soft flannel rag, rag, or sponge. It is worth washing not only from the inside, but, if possible, also from the outside.

Pay particular attention to the drainage channel. You can get rid of trash or litter stuck there by gently wielding an ordinary toothpick. This will prevent stagnation of water in drains and obstacles in the movement of window sashes. In order for pvc windows to serve without problems in winter, it is also necessary:

And a little more about the seals. They must be periodically lubricated with special grease or technical petroleum jelly. Timely care will help avoid drying and freezing. But during a preliminary examination, wear was revealed - do not worry: replacing the seal is easy to do yourself.

Select the required option on the construction market and install it after removing the old one (using a flat screwdriver). It is advisable to lubricate the seat with grease. After - it covers the entire area of the seal.

Setting up window fittings for the winter period

Before the cold weather approaches, it is necessary to adjust the window fittings: the frame should press more tightly against the glass unit: this is the only way to exclude drafts. You will need a hex wrench to complete this step. If you do not know how to adjust the hardware, use our tips.

The horizontal sides are adjustable from the top and bottom panels. Take a closer look: they have a special hole for a hex key.
The top panel is adjusted when the window is open. Raising the edge by turning the key to the right.
If the window is on the ground floor and can be accessed from the outside, there is no need to open the sash. The hinge at the bottom allows the vertical sides to be adjusted. To get to the hex hole - first remove the protective cap.
To increase the pressing force of the profile frame, you need to monitor the eccentrics. To do this, turn them to the right. Specially applied marks that determine the pressing force will serve as a guide. Attention! If the mark is turned towards the seal, the pressure is strong. Often the eccentric is turned with ordinary pliers.
In the places where the hinges go, there are devices that are responsible for the clamping force. How do you recognize it? Therefore, the tongue protrudes so strongly. The longer, the stronger the frame is pressed against the window. Measurements are usually made with a hex key.
Do not under any circumstances apply strong pressure on the tongue! This will inevitably lead to rapid wear and complete failure of the window seal.
Do not neglect the adjustment of the hinges, transferring the pvc structure to winter mode. Please note: on the lower hinge, most manufacturers have provided a protective cap that can be removed. After this, a special bolt is screwed in.

If you carried out these manipulations, the adjustment of the plastic windows for the winter is complete. Everything is quite simple: the main thing is to be neat and consistent. But it also happens: everything is done correctly, but the window still retains heat poorly, and a draft enters the room. Why this is happening and how to fix the situation - we will tell further.

Preparing plastic windows for winter: how to keep maximum heat?

PVC profile does not retain heat well, transmits noise, and condensation accumulates on the glass unit? Depressurization has occurred, requiring immediate attention. The most common causes of the problem are:

Shrinkage of the walls occurred after the plastic windows were installed. Solving the problem is easy - just adjust the fittings.
The sealant has outlived its term. The replacement, which we wrote about above, will help here.
The junction of the slope and the frame is leaking. We'll have to remove the slopes, insulate them and mount them back. If you do not have enough experience to carry out this manipulation, invite a specialist.

A single-chamber and two-chamber double-glazed window in extreme cold requires additional insulation. It can be produced using a film, preferably frost-resistant. For high-quality insulation, you need to know that:

Sticking the film inside the room, and not on the outside of the window, is the most effective and energy-saving.
Glue the film, control the uniformity and tension. If this is not done, breakouts can occur on it.
It is not worth replacing the film with minor damage. Tape the breaks carefully with tape.
The best option is a frost-resistant film (it has a high density and a characteristic yellowish tint). We do not recommend buying it on the market. It is wiser to visit a large hardware store that sells certified products from trusted manufacturers.
At the same time, it is durable and decorative enough, for gluing the window from the side of the room - a greenhouse film. And also - it is durable.
Do not use a construction stapler or pushpins to secure! They rip the material. All you need is scotch tape.

Recently, an environmentally friendly and reliable pvc insulation has been used. It is resistant to deformation and severe frost. We hope we have exhaustively told about how to prepare euro windows for winter and were useful. Good luck!