Mesh fences are popular not only among owners of private houses, they are widely used in enterprises and public institutions. They transmit light perfectly and serve as a support for curly hair. ornamental plants, easy to repair.

Peculiarities

Often the mesh is used only as a temporary fence, however, some types of it allow you to mount a strong and original fence. Many people associate mesh fences with dull gray chain-link, however, today there are many modern bright models with interesting cell shapes on the market. Metal and plastic mesh not only perform dividing and fencing functions, but are also able to decorate the area with their appearance.

Advantages and disadvantages

Like any material, mesh has a number of advantages and disadvantages.

In favor of wicker metal products they say:

• openness to sunlight;
• easy repair and ease of maintenance;
• easy installation;
• light weight;
• acceptable price;
• anti-corrosion properties;
• resistance to negative consequences vagaries of weather and climate in general.

Welded mesh for fence has additional positive properties:

• quick installation thanks to a special release form (sections);
• arbitrary fence height (whereas the height of a chain-link fence is determined by the width of the roll);
• higher protective properties.

Its disadvantages include:

• higher price than chain-link;
• significant weight, making installation difficult without assistants;
• the need to paint the fence if the material is not coated with polymer.

When choosing a plastic sheet, be guided by the following advantages:

• light weight, facilitating the installation process;
• large range of products;
• resistance to environmental factors;
• long term use;
• easy care.

The most significant disadvantage of plastic is its extremely low strength. The disadvantages of all types of mesh fences include their appearance, which not everyone finds aesthetically pleasing. In addition, the protective properties of many mesh fences leave much to be desired. If someone does not like to put their site on public display, then this is not a reason to refuse durable and lightweight fencing. You can plant shrubs or grapes along the fence. Overgrown shoots will reliably hide the life of the inhabitants of the house from prying eyes and create a unique design.

Kinds

The main types of metal mesh are made by weaving or welding.

• Of the wicker ones, the most famous is, perhaps, Rabitz. It is made from galvanized round wire. GOST assumes the presence of several types, differing in cell size and wire thickness. A fence made of black steel mesh will have to be periodically tinted; galvanized products do not need painting.

• twisted mesh extremely rarely used for fences. As the name suggests, the wire is twisted at a specific angle to create hexagonal cells.

• Channeled (corrugated) mesh implemented only in cards. It is not particularly flexible, which is due to the composition of the raw materials: it is made from black carbon steel. Before weaving begins, the wire is bent in a special way.

• The material for welded mesh is galvanized steel wire. The thinnest is 4 mm, the thickest is 3 times more. The most durable products are made from reinforcing mesh. The joints of perpendicularly intersecting rods are fastened using spot welding. The most common cell shapes are square and rectangle.

• To make expanded metal mesh you need whole steel sheet . Using special equipment, steel is cut and drawn. The shape of the cells is rhombus. How rigid the product will be depends on the thickness of the material and the width of the cutting.

• An extraordinary solution decorate your fence gabion mesh. Essentially, these are rectangular or cylindrical boxes made of cells different types, the filling of which can be selected to suit your taste. Most often, stone or wood cuts are chosen for this purpose.

• Plastic mesh becomes more and more durable, and is gradually gaining ground over the classic chain-link, since it has a significant number of positive qualities.

• Woven mesh with small cells, actively used during construction work, is sometimes used when installing fences.

Metal

Wear-resistant and relatively inexpensive metal mesh fencing, used to mark the territory and protect the site, are becoming more and more original and aesthetically pleasing. Among the clear advantages of woven mesh are the ease of manufacturing a fence and durability. The chain-link can last about five decades. Its protective function is low, but if there is no need for special strength of the fence, wire is perfect solution. Climbing flowers and vines, entwining such a support, create beautiful compositions.

The service life of the simplest products made from ordinary steel wire does not exceed three years due to corrosion. The polymer coating makes the product more expensive, but gives it a more respectable appearance. Performance characteristics are also improved. In particular, the polymer is not afraid of corrosion. But it may well be damaged by rodents if the fence is installed in a country house or around a private house outside the city.

Galvanized mesh – optimal for its properties option, however, it will cost more than the previous two. Such a fence will last at least 10 years. He is not afraid of the vagaries of the weather, or mechanical influences, or the influence of aggressive chemical substances. Decorative iron mesh is made using corrugated or twisted rods, which make it possible to give the product a three-dimensional volume.

Welded products are popular due to their low price, easy installation, and ability to hold their shape well and not sag. This type is also supported by the fact that it does not need to be painted. If the manufacturer coats the welded mesh with polymer, it becomes completely unaffected by seasonal temperature changes and high humidity.

The polymer is applied using baking technology. When purchasing such products, you should make sure that there are no cracks on the surface. If the top layer is damaged, the metal will quickly begin to rust when exposed to moisture. High quality coating will not come off or break even after several bends of the wire.

The 3D welded mesh looks original. Curved rods add volume to the product. The manufacturer positions Eurogrid as a product that combines high protective and aesthetic qualities. When installing a sectional euro fence, they do without a welding machine.

Installation of durable and beautiful design saves time and money. 3D panels are used to enclose various objects: from playgrounds to airports. Their versatility and excellent performance characteristics explain the popularity of the product.

Welded modular designs are able to last at least a couple of decades without losing their appearance And protective properties. Metal mesh can be purchased in rolls or in sections. A corner or profile pipe is used to make sections.

Mesh without galvanization quickly becomes covered with rust, so buyers often prefer galvanized products. Polymer-coated mesh is no less popular. A more expensive, but also more durable option is galvanized mesh with a polymer coating. It does not fade in the sun, does not crack or peel, as often happens with paint.

Mesh structures are particularly durable and reliable. They are often reinforced with stiffening ribs. To install the rolled mesh, pillars made of concrete, wood or metal are used. They are installed to a certain depth and concreted. To increase the strength of the structure, wire is pulled between the supports or pipes with a rectangular cross-section are laid.

Plastic

In addition to the usual metal ones, there are light flexible polystyrene meshes (fiberglass mesh, paint mesh, geogrid). Their strength, of course, cannot be compared with their metal counterparts, but they are not afraid of corrosion. The service life of plastic products is more than 3 years.

Layed at the base of the lawn, such a mesh will protect it from mole invasion. Like chain-link, it is an excellent support for various climbing plants. PVC cellular fabrics are not affected by temperature changes, ultraviolet rays and moisture.

Plastic mesh is very decorative; the range of products is quite large due to the rich color range and variety of cell shapes. Lightweight material allows you to roll long strips, which means you can mount a fence with fewer joints. Consumers especially like options with significant material thickness and large cell sizes.

In terms of protection, PVC mesh is certainly inferior to metal mesh, but it is widely used in decorative purposes in areas already fenced off or for temporary fencing.

Fabric

Woven mesh is more often used in construction than for the construction of fences, but it also finds application in this area. Lightweight woven wire mesh is available in rolls. Its production uses thin threads of metal wire with a diameter of 0.03 mm-3.0 mm. Perpendicular weaves are created from them on machines. The quality of the mesh fabric is determined by the relevant GOST standards.

To create a woven plain or twill mesh, tinned and galvanized wire is used. There are products without coating. Galvanization is good because it provides anti-corrosion protection; it is not afraid of rust stains and cracks. The surface of the canvas can be smooth or corrugated. This type of mesh is durable and elastic. Strength is directly proportional to the diameter of the metal threads and inversely proportional to the cell size. Hardness is affected by the amount of carbon in the raw material and the type of surface. Corrugated meshes are more rigid.

Colors

The color range offered by manufacturers is not very wide. However, it allows you to create different compositions without being limited to boring gray.

• The chain-link is often painted green or brown. There are also red, yellow and black options.
• For coloring the welded mesh, choose white and green color. Products sold in blue and red.
• Plastic structures delight with rich and bright colors: orange, light green, yellow.

Colored or uncolored mesh can be combined with monolithic areas with photo printing. The paintings look very impressive against the background of an almost transparent fence. Such a fence will decorate the entire site.

A photo grid will help you decorate any fence and make it different from its neighbors.– polymer cellular fabric, onto which special technology the image is applied. The photo can also be placed on banner fabric, but it is better to do this on a reinforced plastic mesh, since the latter is capable of transmitting air and light thanks to its tiny cells. Without shading the plantings, the grid will not make it possible to view the area from the street. Through such a photo fence it is difficult to see even silhouettes.

Banner fabric is recommended to be used for decoration reverse side corrugated sheets. The metal will not heat up as much, and plants planted near it will feel much more comfortable.

Which one to choose?

The choice of material for the fence largely depends on the characteristics of the site and its use.

• If you decide to buy a chain link, you need to determine the most suitable mesh size. The smaller they are, the stronger the canvas and the lower its ability to transmit light. Based on these characteristics, it is worth analyzing the operating conditions. If we are talking about a fence for a summer residence, then the size of the cells in the range of 40-60 mm will be optimal. There will be no lack of light, and the strength will be quite satisfactory.

If you need to fence a sports ground, it is better to purchase a canvas with smaller cells so that the net does not become deformed from ball hits and attempts by young athletes to climb the fence.

• Gardeners will be interested in synthetic shading mesh, otherwise the plants may suffer greatly from the scorching rays of the sun. Depending on the location of the beds and fruit trees, you can select canvases that have different abilities to transmit rays, optimally using them for darkening.

• The strongest and strongest welded mesh is chosen by those for whom safety is the main priority. It is often used for fencing industrial facilities.

• When using very strong wire mesh for fencing, it is better to buy the fabric with the largest mesh size to ensure access to sunlight.

• Plastic mesh can be placed inside garden plot, since not in all cases it can become a full-fledged replacement for a metal fence. But it will make an excellent support for plants; you can use it to decorate a flower bed, flower garden, make an aviary, etc.

• Having decided to purchase material for a gabion fence, you need to think about the filler in advance. And there may well be several of them. You can try to combine the “filling” of stone, wood and crushed stone.

• If you need to install a fence very quickly, it makes sense to opt for ready-made panels, for example, from 2D and 3D welded mesh.

Thus, on construction market There are enough types of mesh to make a choice that you won’t regret later. It is enough to correctly assess the operating conditions and the requirements that the buyer places on the product.

Installation features

It is quite possible to install a mesh fence without the help of professionals.

• After marking, they begin to install the supports.
• Polyethylene is placed at the bottom of the pit. This way you can prevent moisture from penetrating into the soil after the concrete has dried. The next layer consists of crushed stone, then comes the turn of sand. The poured concrete must dry completely, this will take several days.
• If there is a need only for temporary fencing, the distance between the posts should be 3 meters. A couple of rows of wire between them will become the basis for securing the mesh and give the structure strength. When using a chain-link, you will need to do additional work: bend the ends of the wire at the top and bottom.
• If a permanent fence is installed, the pillars need to be concreted to the freezing depth. They are installed more often: every 2 meters.
• It is recommended to treat wooden posts with drying oil. For this purpose, mining is also used machine oil. They are not concreted; dense compaction with crushed stone is sufficient.

• In order to tension the mesh, you need at least two horizontal bars. For this purpose, wire, metal strips or wooden planks are used. The roll is unrolled and the canvas is tied to supports and crossbars using steel wire.
• When installing a fence, it is necessary to constantly monitor the uniformity of tension, otherwise the mesh will begin to sag over time.
• Sectional fencing involves the presence of rectangular cards made from angles or pipes, with a mesh stretched over them. The canvas in such a frame is secured by welding or held on by bolts. The supporting structures in this case are represented by brick or concrete pillars, steel pipes. The minimum depth of their laying is 60 cm.
• Fastenings for sections are made from a corner or strip of metal. They are mounted on support posts, then frames with mesh are secured.
• We sell fences on screw posts that do not require concreting.
• Many manufacturers offer to purchase a prefabricated fence, the kit includes ready-made panels, posts and fasteners.

Examples

Any fence, and especially a mesh fence, in addition to protecting and dividing, also has a decorative function, especially if you approach its creation creatively. Textiles are used to decorate a simple mesh. Fabric ribbons are tied with beautiful bows at the joints or used to create a pattern on the canvas itself.

Gabion mesh provides a lot of room for imagination. The combination of different fillers will make the fence unlike any other.

The easiest way to create a unique image of a site is to plant climbing plants along the grid. They will not only turn a banal fence into a beautiful hedge, but will also create a pleasant and much-needed shade on hot days, purify the air and fill the garden with an indescribable aroma of freshness.

Many people choose mesh as a fence for their property. This option has many advantages. It comes in a wide variety. Before installing a mesh fence around your home, you need to carefully study all the nuances of such a design, as well as the rules for its installation. Only after familiarizing yourself with the characteristic features of all models in the range will you be able to choose the ideal fence for your site.

Features: advantages and disadvantages

Like any fence base, the mesh design has its own character traits. Among them, both positive and negative characteristics can be distinguished. The advantages of the mesh include:

• ease of acquisition. It can be found in almost any construction supermarket where big choice of these products.
• The structure is easy to install yourself. Installation takes only a few days, and if you don’t work alone, the structure can be installed even within 24 hours.
• An important advantage is the low cost of the mesh. Compared to stone or brick fences, metal or plastic mesh has a much more affordable price. There is no purchase required to install it additional materials and equipment, which helps avoid tool costs.
• The fence allows air to pass through well. The area with such a fence is fresh and cool at any time of the year.
• In addition to air, the mesh also allows light rays to pass through. This feature is very useful for the plants on the site.

• Thanks to its non-monolithic design, the fence creates an optical effect of expanding the space on the site. It does not visually reduce the area, but on the contrary, adds spaciousness to the atmosphere.
• This type of fence is not required pre-installation foundation. This feature helps save energy, time and money.
• Important quality mesh – light weight. It is easy to move from place to place and transport. Even for fencing a large area, all materials can be carried independently without causing harm to health.
• The surface of such a structure is almost impossible to tear

The disadvantages of mesh material include the following:

• Compared to stone or wood, mesh is not resistant to strong natural disasters. In the event of an earthquake or hurricane, such a fence will not be able to stand level for long.
• Protective function such a fence has been weakened. Uninvited guests will be able to enter your property by simply climbing over the fence.
• A chain-link fence does not provide absolute privacy. Neighbors or passersby can observe what is happening in your garden.
• Mesh weave is not resistant to temperature changes. Since the material is non-monolithic, it is more susceptible to thermal influences.

• Excessive exposure to ultraviolet rays also affects the quality of the product.
• A thin mesh can be easily bent or deformed by mechanical action.
• A fence made of such material requires careful care. Periodically, it is necessary to restore the fence so that it can function normally.
• Compared to other materials, mesh does not have high level aesthetics and attractiveness.
• Most materials from which a fence can be made are not resistant to excessive moisture.

Kinds

Mesh fences are represented by many models. They are classified according to several criteria into a fairly large number of species.

Materials

According to design and materials, fencing includes the following types:

• Chainlink mesh is a very common type of fence, which is a wicker version. It was invented back in the 19th century, as was the machine for its production. Cells of the structure may have different size: from 0.25 to 0.7 cm. You need to choose a size taking into account several factors:
  • A fine mesh does not transmit light well into the area. Its purchase is justified if there is no vegetable garden. For dachas where planting is done, it is most optimal to choose models with cell sizes from 0.4 to 0.6 cm.
  • It is important that the sectional fence is able to withstand impacts. Large cells are more resistant to mechanical stress. They are optimally chosen for children's playgrounds;
• wire, which is sometimes equipped PVC coated;
• plastic;
• galvanized wire with polymer coating;
• stainless steel;
• soft iron wire.

The following types of mesh are distinguished depending on the coating:

• galvanized fencing is equipped with a special zinc layer that prevents the appearance of rust as a result of exposure environment.
• A non-galvanized product is installed for painting. This material must be painted immediately after installation. It's quite cheap, but more susceptible negative impacts and corrosion.
• A more expensive option is plastic-coated chain-link mesh. Plastic most effectively protects the fence from various influences, gives the product durability, while at the same time making it more expensive.

Chain-link mesh has a number of advantages, thanks to which most buyers prefer it:

• Reasonable price;
• the possibility of reusing the dismantled structure;
• suitable for fencing various types of areas, not just country houses;
• it is easy to install;
• This mesh is sold in rolls, it is easy to assemble and calculate the desired size.
• Chain-link mesh is quite resistant to temperature increases, it can withstand even very high temperatures.

Welded steel mesh used for many purposes. It comes in two types:

• armored belt;
• structure consisting of squares.

The diameter of the wire from which the product is made varies between 0.3-0.5 cm. At the intersection points, the rods are welded to each other for greater reliability. If additional reinforced layers are created from reinforcing mesh for floors or walls, then structures with square cells are used for other purposes, which affects their shape and size.

• To fence areas where animals will be located, use roll structures, which must have a clear, uniform cell shape, be equipped with high-strength connections between the rods and be highly resistant to corrosion due to galvanization. The correct geometry of the compartments will help not harm the pets and avoid the spread of debris and droppings outside the enclosure. Strength is especially important because among animals there are those who like to influence the fence in some way: butting, kicking, and so on.
• For fencing summer cottages, stadiums or industrial enterprises use these types of welded mesh, which are sold in layers. The area of ​​the squares is usually 10x15 cm. The design always lets in a lot of light, but it is more durable than the Chainlink mesh. The fence is equipped with stiffeners, which give it additional strength, clear outlines and provide a higher level of protection for the land.

• Welded The technology is carried out in two ways. One of them involves pre-galvanization. During the welding process, the galvanization at the joints can peel off, which sometimes subsequently leads to corrosion in these places. If galvanizing is done after welding, then such a fence is more resistant to environmental influences. To ensure greater resistance of structures to impacts, an additional polymer layer is applied. The undoubted advantages of a welded product are its strength and reliability. It will last for a long time because it is more resistant to deformation, since the structure is rigid. The relief of the surface on which the fence is placed can be any.

A fence of this type is sometimes equipped with special protrusions that make it difficult to penetrate the site. If the product is damaged, the situation can be easily corrected by replacing the damaged layer with a new one. Welded products are installed as a modular fence in areas around the cottages. The difference between such a fence is that it consists of a set of elements. Sections, panels and various fasteners are supplied complete, which significantly speeds up the process of installing the fence.

Plastic the fence consists of intertwined extruded fibers with a polymer compound. It is used for the following purposes:

• as a garden trellis. This plastic fence is convenient for individual flower beds, beds or areas of the garden.
• As the main fence of the site. The product often has the same design as the “chain-link”, but has its own advantages.
• Convenient to use as an emergency structure plastic products, covered with a layer of paint that reflects light.

The advantages of plastic mesh fencing are:

• Possibility of installation without additional attributes;
• extreme lightness of design and ease of carrying;
• color variety of products;

• absence of corrosion and, as a consequence, resistance of polymer materials to environmental influences;
• long service life, which often exceeds a decade;
• if there is a risk of injury when operating a metal structure, then the plastic alternative is absolutely safe;

• resistance to ultraviolet rays;
• ease of care. There is no need to cover the structure with a protective layer or enamel. You can clean the fence from dirt using ordinary water;
• polymer material non-toxic, therefore does not cause diseases or allergies.

Among the shortcomings, one serious disadvantage can be highlighted. Plastic fences do not provide complete protection against the entry of ill-wishers into the area.

They are easily susceptible to mechanical stress, and there will be no noise warning of the appearance of robbers, unlike the case with metal structures. That is why it is recommended to use them not as the main fence, but as a partition on the site.

A separate type of mesh fencing is corrugated mesh, which is superior in strength to all other models. It is made by a special weave of metal rods, which is similar to that used in weaving. The metal rods are bent, and after intertwining with each other, they are secured. Their thickness can vary from 0.2 to 0.7 cm. The corrugated structure can have different strengths:

• standard models.
• Models and partial corrugation. There is no corrugation on the wire from which they are made.
• Models with complex corrugation. Here the warp and weft have additional fluted curves.

The raw materials for the manufacture of products with relief can be varied:

• carbon steel;
• high alloy steel;
• low carbon steel.

An unusual option Gabion mesh is used to decorate the site. It consists of welded or twisted mesh boxes filled with various materials.

Boxes most often have the shape of a rectangle or cylinder; they are sometimes made of reinforcing mesh. Cells can be hexagonal or rectangular in shape. The most popular fillers are stone and wood cuts, but other building materials are sometimes used.

Lightweight metal mesh is used as a temporary fence on the site. The parts of the wire in this design are connected using a hinge unit. To make such a mesh strong, cells are made of unequal sizes. With each row their size decreases by 5-10 cm, and then becomes larger again. Such meshes are convenient to use during construction work, but they are short-lived.

Colors

The range of shades in which fence nets are made is not very wide. For each species, a certain range of colors is considered the most popular.

• Chain-link mesh may have a gray color, especially if it is galvanized. If the structure is painted, then most often it is green or brown. Sometimes you can see yellow, black or red shades. Colored mesh requires compliance with painting standards, which involve calculating a coefficient for painting a lattice fence.
• Welded mesh is most often white or green. There are designs in blue and red tones.
• Plastic fences are often made orange, light green or yellow. This combination of colors helps to attract attention, and sometimes plays a decorative role.
• For originality, areas with a grid can be “diluted” with several monolithic blocks with photo printing. Thus, an almost transparent fence in combination with bright colors would be an interesting addition landscape design your site.

Which one to choose?

In order not to make a mistake with the choice of material for fencing, you need to take into account a number of additional nuances, and also consider some types of mesh models.

• If you have a vegetable garden on your property, consider purchasing a shade net. Shading fence made from synthetic materials, will protect your plants from scorching rays and provide an optimal ratio of light and shadow. You can choose products with different degrees of ray transmission for more or less darkening.
• The ability to independently transport the material to your site. If you have nothing to transport bulky structures with, a complete Euronet will suit you. Finished materials in rolls it is very easy to transport in a regular car.

• When choosing a gabion fence, think about how best to fill its box. Design your future fence in advance. So, in design you can successfully combine two different fillers, for example, stone and board. An interesting design can be created using crushed stone filling.
• In addition to standard welded fences, there is such a variety as expanded metal mesh. It has diamond-shaped cells and is highly durable.
• Pay attention to reviews of manufacturing companies. Among them you can find companies that, instead of traditional 2D format products, produce welded fences with a 3D effect.

3D mesh made of metal rods is one of the most popular materials for constructing a fence structure. The mesh fence is distinguished by high strength and durability performance characteristics, low price. Such characteristics determine the wide demand of customers for 3 d mesh.

How 3D mesh is made

3 d mesh is made of hot-dip galvanized wire. The production process is fully automated. Treated wire various diameters is cut into metal rods of the required diameter, from which the panel is subsequently welded. For welding, a spot method is used, the use of which does not deform the 3 d mesh.

A V-shaped bend of 100 mm is made on the finished panel, which increases the rigidity of the structure.

After cleaning, washing and drying, the panel is painted and then baked in a polymerization oven, due to which a high-strength polymer layer is formed on the section, protecting ready product from corrosion.

Assortment of 3 d mesh for fence

Our company offers a wide range of 3D mesh for fences and all the equipment necessary for a complete fencing installation.

Standard line components:

3d mesh for fence - 1730x2500 mm, 2030x2500 mm, 2030x3000 mm, section rod diameter - 3-5 mm;

pillars 60x40x1.4, height 2000 - 3000 mm;

gates 1530x1000 mm, 1730x1000 mm, 2030x1000 mm, d.p. 3 - 5 mm;

gates 1730x4000 mm, 2030x4000 mm, 3, 4 mm.

fastening - set Clamp 40x60, bracket with bolt or self-tapping screw;

set of tops V-shaped and for L-shaped SBB 500

AKL SBB 500/50/3 Bay (10m)

wire clamp

Color ready-made solutions standard line - green (RAL 6005).

Coating type: just galvanized and galvanized + polymer

Our company has own production, so we can also make custom fencing according to the dimensions of an existing project.

Size range of non-standard solutions:

3d mesh for fence - height 1530 - 2930 mm, width up to 3100 mm, length 3 - 5 mm;

pillars - wall thickness 1.4 - 3.5 mm, section 60x40, 60x60, 80x80, height 1000 - 12000 mm;

gates - height 1530 - 2930 mm, width 1000 - 1000 mm;

gate - height 1730 - 2930 mm, width 3000 - 6000 mm.

Any color from the RAL line is used for painting.

How to buy 3 d fence mesh

Buying 3D fencing mesh from our company is profitable due to the absence of an intermediary markup. In addition to the low price, you get high quality, backed by product test certificates and a service life guarantee of up to 60 years.

In our company you can buy 3D mesh of any standard size from the standard line of ready-made solutions or place an order for production.

To contact a customer service specialist, leave a request for a call back or call the regional office yourself. You can also request a calculation based on your volume by sending a request by email.

The manager will advise you in detail on all items, inform you about availability, calculate the cost, organize door-to-door delivery and turnkey installation. A wide network of warehouses throughout the country allows the customer to buy 3 d mesh directly in their region.

How to install a 3d fence mesh.

Installation of 3D fence mesh is quite simple. Most often the attraction special equipment is not required, as in the case of concrete and brick fences.

You will need a team of at least 3 people and working tools for installation. Before starting work, we recommend that you read the installation instructions for the fence mesh 3 d.

GOST standardizes many things, including how areas can or cannot be demarcated. For example, regulations require that neighboring areas be demarcated with transparent fences. Since the boundary is usually long, it is desirable that the fence be inexpensive. Actually, the choice is small - a fence made of chain-link mesh or. The wattle fence, although cheap, is extremely short-lived, so all that remains is a mesh fence. In general, it’s correct to say “chain-link fence,” but it’s more common for the ear to incline the name.

Popular and inexpensive - chain-link fence

Whatever this fence is called, it has a significant amount positive aspects. The first and most important advantage is low cost. This applies to both the filling itself—the mesh—and the rest of the structure. To tension the mesh, no foundation is required. It is enough to drill holes about a meter, insert a post and, filling it with crushed stone, compact it well. That's it, nothing concrete works. On most soils, this method of installation for this filling works “five”.

Designs and installation methods

The fact is that a chain-link fence is lightweight. Moreover, it is light both in terms of its own weight and in terms of perceived wind loads. No matter how strong the winds blow, the pressure transmitted by the mesh to the poles remains insignificant. Due to their low weight, this technology for installing pillars can be used: in a hole, backfilled with sand or crushed stone, without concrete. Moreover, such a fence can stand without problems even on heaving clay soils with a high level of groundwater, and even with a large freezing depth.

Without guides

Here's how it works. It's about about the simplest design: just pillars with a mesh stretched between them. As you can see, the pillars are buried to a depth of less than a meter. What happens to such a fence on soils that drain water normally? All water located near the column goes down through the sand or crushed stone to the bottom of the hole. There it leaves naturally - it seeps into the underlying layers. Even if frost hits and the sand or crushed stone around the post freezes, the moisture contained is not enough to have any significant impact on the post.

On clays and loams you can use the same principle, but you must fill it with gravel. And be sure to pour 10-15 centimeters of gravel at the bottom of the hole, and only then install the post. What happens in this case? Water still accumulates below, but it leaves very slowly. It may well happen that by the time it freezes, the crushed stone will still be wet, or even in water.

What will happen then? It will freeze and become hard. But since the soil also freezes, it puts pressure on the crushed stone. The forces are considerable, and the ice breaks, the crushed stone becomes mobile and compensates for most of the pressure created by the soil. As a result, if any movement of the pillars occurs, it is very small - from a few millimeters to several centimeters. Since the structure is not rigid, the mesh will easily transfer it without any harm. After everything thaws, the pillars will lower into place. But this scenario only happens if they are positioned perfectly vertically. Otherwise, the pillars may tilt and everything will have to be corrected.

With guides (slugs)

Sometimes, to make the fence more solid and hold its shape better, two longitudinal guides are attached to the posts. They may be made of pipes, or they may be made of timber. Wood, as a plastic material, will withstand ground movements remarkably well, but a welded pipe will create additional difficulties.

The degree of rigidity of such a fence is higher, and during heaving, if the posts are squeezed out, it is quite possible that in some places the pipes may be torn off. To prevent such a situation, you will have to dig below the freezing depth in your region. Everything else remains the same: the hole is 15-20 cm deeper than required, there is crushed stone at the bottom, then a pipe is inserted and filled with well-compacted crushed stone.

Sectional

There is another design of a chain-link fence. Frames are made from the corner, onto which the mesh is then stretched. Ready sections welded to exposed posts.

As is clear from the description, the design is also quite rigid. This means that on heaving soils (clay, loams) it is necessary to bury the pillars 20-30 cm below the freezing depth of the soil, but it is also advisable to do this without concreting. If you fill crushed stone with concrete, the likelihood that the pillar will “squeeze out” increases many times over.

Types of chain-link mesh for fences

Even such a seemingly simple material as chain-link mesh can be different. Moreover, the difference is significant both in price and in service life.

Plastic or polymer mesh - 100% polymer

Except different materials, the chain-link has different cell sizes. It varies from 25 mm to 70 mm. The larger the cell, the cheaper the mesh, but the smaller bearing capacity she has. If you are installing a chain-link fence at the boundary with a neighbor, take mainly the middle link - from 40 mm to 60 mm.

What to look for when choosing a mesh

Carefully inspect each roll. Its edges should not be curved. The upper and lower cells should have curved “tails”. Moreover, it is desirable that the length of the bent part be more than half the length of the cell. This mesh is easier to stretch.

The edges should be smooth and curved

Pay attention to the thickness of the wire, how even the cells are, how ugly they lie. All deformations are a sign of low quality.

If the mesh is polymer-coated, check the warranty period provided by the manufacturer. With the cheapest ones, not only does the wire often bend, but they also use ordinary plastic, which, under the influence of ultraviolet radiation, after a couple of seasons becomes brittle and begins to crumble. Normal coating can last up to ten years or more. Therefore, in this case, there is no need to chase cheapness.

Which pillars to use

There are several options:

Most convenient option of all those mentioned, this is a profile pipe, and better - rectangular section. It is easy to attach the mesh to it, and you can weld hooks or wire if necessary. If possible, install these. The optimal cross-section for a pillar is 25*40 mm or so. There is no need to take a larger cross-section - the fence is light.

The order of installation of pillars

First, the pillars are placed in the corners of the site. If you need to fence only one side, place one post at the beginning, the second at the end. Their verticality in all planes is strictly checked, and the height is adjusted. At the very top and 10 cm above ground level, two cords are pulled. The rest of the pillars are placed on them. The height is leveled along the upper cord, the lower one serves to facilitate orientation: by applying a plumb line to a point on the upper thread, you can find the place where the hole will be drilled.

The installation step of the pillars is 2-3 meters. Less is too expensive, more is no point, the mesh will sag. When installing a grid without a guide wire, it makes sense to place posts every 2 or 2.5 meters. This makes it easier to tighten the mesh without sagging. For other models - with wire, slugs (guides) or sections - the step can be 3 m.

If the mesh is pulled between the pillars, the outer ones will bear a considerable load. To prevent them from being led away, they put up jibs. They are placed, dug in, and welded to the installed pole.

Installation of chain-link mesh

It’s only at first that it seems easy to install a chain-link fence. As soon as you start to think about how to fix the mesh on a pole, how to tension it, everything is not so obvious and simple... First, about the general rules. The mesh is attached to one of the corner posts. Fasten in at least four places. In principle, you can simply fasten it with wire, passing it into the cell.

The method is simple, but not the most reliable. If the fence is at the dacha, during the absence of the owners, the mesh can be easily removed and taken away.

You can at least secure it more securely on the first and last pillar. To do this, take a steel rod with a thickness of at least 4 mm, thread it through the cells, weld it to the post, grabbing each 40-50 cm (pictured on the left).

Another way: weld three or four rods with a diameter of 6 mm to each post. A mesh is placed on them and they are bent.

If you are still paranoid about removing the mesh, you can drill two through holes in the post, insert a rod bent in the shape of a horseshoe - U, gripping the mesh with the “back”. On the side where the ends come out, twist and rivet them, or weld them.

Tensioner

There is another problem: how to tension the mesh. If the design is simple - without slugs (transverse guides that are fixed between the pillars), you can simply stretch the mesh from one pillar to another. Just note that it must be attached sequentially to each post. Fastening first through one, and then intermediate ones is a bad idea: there will definitely be uneven tension and sagging.

How to tension a chain-link mesh so that there is no sagging? Insert the rod, grab it and pull with all your weight. The stretch will be quite significant. You need to work with an assistant: one pulls and holds, the second fastens.

With wire

This type of fence is good because it can be installed quickly. But the top edge may sag. If someone climbs through it, the top will definitely become wrinkled. It is unlikely that it will be possible to straighten it. To prevent the top from sagging and “creasing,” a wire is pulled through the first row, either steel or plastic-sheathed so that it does not rust.

If wire is used, the technology can be simple: make a loop at the end and throw it over the outermost post. They unwind the wire, trying to tighten it; after two or three posts, make another loop, wrapping the wire around the post. So until the end of the flight. If you use muscle force, you won't be able to pull it enough, and the wire will inevitably sag. This is easy to fix. Take a thick metal rod and use it to twist it, pulling the wire. Is one twist not enough? A little further you do another one. This way you pull up all the “spans”. Afterwards, you can begin to “pull” the mesh, tying it to a stretched wire.

If you weld “ears”—a metal strip with holes—at the top of the post, the wire can be attached to them. It is easier to stretch a piece of 2-3 meters, but the work is slower.

You can also use special wire tensioners. Then, having secured the wire on one pole, on the second it is passed into a device such as in the photo. It is secured in a clamp, and then using a key, the excess is screwed onto the drum.

You can use a cable and lanyards - hooks with ties-clamps (at a rigging store). On one side, a cable is twisted around the pole and secured with a clamp. A lanyard is placed on the other. Its middle part has a thread, thanks to which the cable can be tensioned.

Lanyard with cable - another option

Since the cable is more flexible, it can be passed through the links. Each one will be too long, after two or three cells it’s normal. One more thing: take a cable with a polymer sheath: it will not rust.

With welded rod

A steel rod with a diameter of 6-8 mm is threaded into the upper cell, or just below. It is cut into pieces equal to the distance from one pillar to another. The threaded rod is welded to the post.

Pay attention to the top of this chain-link. This photo clearly shows that it has already begun to bloom. This is precisely the reason why it is necessary to take a mesh with curved ends. It just doesn’t unravel and even without wire or rod it holds the edge well.

With slugs (guides)

In even more rigid structures, after installing the pillars, slugs are welded to them. These are cross pipes or wooden strips attached between the posts. There may be one guide, or there may be two or three.

As you can see in the photo, in this case the mesh can also be secured using wire. It is clear that all the methods described above can be used. The only difference is that the mesh is attached not only vertically, but also horizontally. The photo below shows another method - with plates screwed on with bolts, the ends riveted. This method can also be used when attaching to poles.

Decoration of a chain-link fence

No matter how happy the fence may make you at first, after some time you will want to either decorate it or make it less transparent in order to hide from prying eyes.

The first way - the most obvious - is to plant plants. If the neighbors do not object, you can plant bindweed or any other annual or perennial plants.

The most natural way is to plant plants

If you just want to decorate your fence, you can do “embroidery”. The squares are the same size, so you can embroider as if on canvas. There are two materials for embroidery: wire and colored twine.

The good thing about colored twine is that you can “embroider” colored pictures. Any that seem appropriate to you.

A not very aesthetic, but quite effective way is to stretch a camouflage or shading mesh. The good thing about these methods is that they require a minimum of effort: just pull it on and grab it in a couple of places.

The shading mesh is almost opaque and the wind load will hardly change

The same effect is achieved if twigs or reeds are woven into the cells. The disadvantage of this option is its high labor intensity. It will take a lot of time.

Ready-made reed mats can reduce manufacturing costs. They are sold in rolls. All you need to do is roll it out and secure it. But the cost is much higher than the previous option.

Another way is to use artificial pine needles sold in rolls. It is used in the manufacture of baskets and wreaths, but it can also be used on a fence.

Green wall - chain-link mesh decorated with artificial pine needles

Not long ago, another way to decorate and, at the same time, reduce the visibility of a chain-link fence appeared - a photo grid. This is a pattern printed on a polymer mesh. Sold in rolls (for tension fence) or fragments (for sectional ones). Attached using eyelets and wire or clamps built into the surface. You can see the approximate effect in the photo below.

Chain-link mesh will decorate the fence and cover the area from prying eyes

Mesh is widely used for fencing summer cottages. Anyone can install a chain-link fence with a minimum of tools on hand. Subject to installation technology and selection quality materials, such a fence will last 15-20 years. Before starting work, you need to study the types and characteristics of the mesh, as well as study the instructions in detail to avoid mistakes.

The mesh is made from black and galvanized wire, so the quality of the chain-link varies. Black wire mesh is the cheapest and most short-lived. It becomes covered with rust after the first fog or rain, and after 3-4 years it becomes completely unusable. You can extend the service life of non-galvanized chain-link by using paint or liquid rubber, which should be applied to the mesh before its installation, and then periodically renew the protective layer.

A mesh made of galvanized wire is not afraid of corrosion, and therefore lasts longer. It costs a little more than black, but does not need any protective treatment. made from galvanized chain-link, they look neat and attractive.

Plasticized chain-link is becoming increasingly popular. This metal grid coated with a dense layer of anti-corrosion polymer, due to which it has increased resistance to atmospheric influences. In addition, the polymer is colored, the mesh looks very attractive and aesthetically pleasing. And although such chain-link is quite expensive, the demand for it is constantly growing.

In addition to quality, chain-link mesh differs in mesh size, wire thickness and roll height. Cells can have sizes from 10 to 65 mm, wire diameter 1-5 mm. The roll height is from 0.8 to 2 m, but the most popular is 1.5 m. The standard mesh length in a roll is 10 m; rolls of 20 m are made to order. The smaller the cells, the more expensive the cost of the mesh, because this increases material consumption .

Type of mesh	Wire diameter, mm	Mesh width, mm	Live mesh cross-section, %	Estimated weight of 1m2 mesh, kg
	1,20	1000	55,0	4,52
woven mesh with rhombic mesh	1,20	1000	61,0	33,73
woven mesh with rhombic mesh	1,20	1000	69,8	2,78
woven mesh with rhombic mesh	1,40	1000	65,5	3,8
	1,20	1000,1500	75,3 (78,9)	2,20 (1,94)
woven mesh with rhombic or square mesh	1,40	1000,1500	71,5 (76,2)	3,00 (2,57)
woven mesh with rhombic or square mesh	1,40	1000,1500	76,3 (77,0)	3,24 (2,74)
woven mesh with rhombic or square mesh	1,60	1000,1500	73,3 (77,0)	3,24 (2,74)
woven mesh with rhombic or square mesh	1,80	1000,1500	76,0 (78,9)	3,25 (2,75)
woven mesh with rhombic or square mesh	1,60	1000,1500	77,5 (80,9)	2,57 (2,17)
	1,4	1000-2000	83,6	1,77
woven mesh for fencing	1,4	1000-2000	87,0	1,33
woven mesh for fencing	1,6	1000-2000	85,7	1,74
woven mesh for fencing	1,6	1000-2000	88,0	1,39
woven mesh for fencing	1,8	1000-2000	87,0	1,76
woven mesh for fencing	1,8	1000-2000	89	1,46
woven mesh for fencing	2,0	1000-2000	87,9	1,81
woven mesh for fencing	1,8	1000-2000	91	1,1
woven mesh for fencing	2,0	1000-2000	90,7	1,36
woven mesh for fencing	2,0	1000-2000	91,7	1,23
woven mesh for fencing	2,5	1000-2000	90,7	1,70
woven mesh for fencing	3,0	1000-2000	89	2,44
woven mesh for fencing	2,5	1000-2000	92	1,41
woven mesh for fencing	3,0	1000-2000	92	1,74
woven mesh for fencing	2,5	1000-2000	94	1,10
woven mesh for fencing	3,0	1000-2000	93	1,53

Prices for mesh netting

Rabitz

Types of mesh fences

Chain-link fencing can be sectional or tensioned. The first option involves the production of rectangular metal sections, inside of which a mesh is fixed. For sections use metal corners, profile and round pipes small diameter. They are connected by welding or bolts, if not. Such a fence looks more aesthetically pleasing and attractive, metal carcass prevents the mesh from sagging.

A tension fence is quicker and easier to install; its design consists only of support pillars and the grid itself. The mesh is secured using steel wire, clamps, or hung on hooks welded to the posts. Pipes are suitable for poles different diameters, concrete pillars, wooden beam.

Installation of fence posts

For both sectional and tension fences, the marking, preparation and installation of pillars is carried out using the same technology, only in the first case the pillars must be stronger. This is due to the additional load from the metal sections; if the supports are too thin, the fence will definitely warp.

To work you will need:

• roulette;
• wooden pegs;
• a skein of thin rope;
• building level;
• hand drill;
• crushed stone and sand;
• solution;
• profile pipes 60x40 mm;
• Bulgarian;
• primer.

Step 1: Installing Corner Posts

The area allocated for the site is cleared of vegetation, leveled if necessary, and the location of the outer pillars is determined. Experienced builders recommend making corner posts from pipes with a larger cross-section than intermediate ones, and digging them deeper. For example, if for intermediate supports they take a 40x40 mm profile pipe, then for corner supports it is better to take 60x40 mm and 15-20 cm longer.

Start installing the pillars:

When the solution has hardened a little, you can remove the spacers and begin marking for the intermediate posts.

Step 2. Marking

A rope is pulled tightly between the corner supports at a height of 15 cm from the ground - this will be the fence line. The line must be divided into equal segments corresponding to the width of the span. The optimal span width for a chain-link fence is 2-2.5 m; if you increase it, the mesh will definitely sag. They step back from the outermost post to the required distance and drive a peg into the ground, and so on until the opposite corner. All pegs should be in contact with the stretched rope and be at an equal distance from each other.

Video - New way to install support poles

Step 3. Installation of intermediate supports

In place of the pegs, holes are drilled for the posts and the bottom is filled with sand. To make it more convenient to control the height of the supports, along the top edge corner posts They pull another rope. Now the pipes are inserted into the pits, leveled in height and vertically, covered with crushed stone and soil and compacted tightly with a crowbar. Concrete is poured on top and the surface is leveled.

If you plan to install a tension fence, and the soil on the site is quite dense, intermediate supports can simply be driven into the ground and not concreted. To do this, drill holes to half the required depth, insert pipes there and hammer them in with a sledgehammer. To protect the upper edge of the posts from deformation, take a larger piece of pipe, weld a steel plate on one side and place it on top of the post. After driving in the supports, the pits are filled with crushed stone and sand, spilled with water for better compaction and compacted thoroughly.

Step 4. Welding the hooks

After about a week, when the concrete has sufficiently hardened, installation can continue. You can secure the mesh to the poles with wire or clamps, but it is more convenient to hang it on hooks. There are profile pipes on sale with already welded hooks, but if there are welding machine, it’s cheaper to make them yourself. For this purpose, pieces of steel rod, screws, nails, even thick wire are suitable - anything that can be welded to the pipe and bent. On a pole 2 m high, it is enough to make 3 hooks: at a distance of 15 cm from the ground, 10 cm from the top of the pipe and in the middle.

Video - DIY chain-link fence

Step 1. Attaching the mesh

A roll of chain-link is placed near a corner post, unwinded a little and the cells are put on the hooks. To securely fix the edge of the mesh, you need to take a piece of reinforcement with a cross-section of 8 mm and a length of 1.5 m and thread it into the cells of the first row. After this, the fittings are attached to the pipe and welded. Now, when tensioning the roll, the mesh will not sag. Having secured the end of the mesh, the roll is transferred to the next support, carefully unwinding it.

Having retreated 10-15 cm from the junction of the chain-link with the pipe, a steel rod is again threaded into the cells. This time there is no need to weld it, it will simply help to tension the mesh evenly. When the mesh is put on the hooks, the rod is removed, the roll is unwound another span, the reinforcement is inserted again, and so on until the very end of the fence. To connect two sheets, use wire from the outermost vertical row of one of the rolls.

Step 2. Fixing the canvas from sagging

Even a well-stretched canvas sags a little over time, so at the installation stage you need to take care of additional fixation of the chain-link between the posts. You will need 6 mm wire and a welding machine. The wire is threaded into the second or third row of cells horizontally along the entire fence. Where the mesh adjoins the posts, the wire is welded. Then the lower edge of the mesh is strengthened in the same way, and finally the hooks are bent. Now the fence canvas is securely fixed on the supports and will not sag or sag.

Step 3. Final stage

Once the fence is installed, the finishing touches need to be completed:

• place plastic plugs on top of the pipes;
• paint the posts;
• Twist the upper tendrils of the chain-link in pairs into 2 turns and bend down.

At this point, the installation of the tension fence is considered completed.

Video - Connecting a chain-link into one roll

Installation of a sectional fence

Manufacturing of sections

Step 2. Preparing the racks

Rectangular plates 20x5 cm and 4-5 mm thick are cut from sheet steel. Take one plate, apply it perpendicular to the pole at a height of 20 cm from the ground and weld it. The second plate is welded at the top, 15-20 cm away from the edge. The plates are attached to the remaining supports in the same way.

Step 3. Installation of sections

The first section is placed between the pillars, raised and leveled. Then they weld the sides to the plates and move on to the next span. It is very important to correctly align the sections in height so that top bars the frames were single line. After installing all sections, the welding areas are cleaned, the fence frame is primed and painted.

Read step by step instructions How to do it in our new article.

Video - How to make a chain-link fence