How to update an old sofa. New life for old furniture: how to update a sofa? Features of upholstered furniture

The sofa is one of the main elements modern interior. Under the influence of various factors, furniture may lose its attractiveness. appearance. It is often impractical and unprofitable to replace sofas due to their cost. There are many opportunities to update your favorite item on your own.

How to update a sofa with your own hands

There are several ways to give your sofa a new look. You can use new decorative elements such as bedspreads, pillows, throws or covers. These items can be purchased in many stores or made to order. More drastic methods are reupholstering and changing the filler. upholstered furniture.

New cover for an old sofa

Purchasing a new case is one of the simplest and quick ways sofa updates. It will help hide all flaws and defects. Finished goods sell for furniture standard sizes. If the sofa does not fit this category, then you can order individual tailoring in a specialized sewing workshop for specific dimensions. One of the undeniable advantages of these products is the ability to wash them in case of contamination.

Measurements

Before purchasing or ordering a cover, you should take some measurements of the furniture using measuring tape. The following data is required:

the length of the widest part of the sofa: back or seat;
armrest length;
seat depth;
seat height from floor;
length of protruding sectors on corner sofas.

Next, according to the available data, you should make a pattern. It is better to draw it in a reduced size on special graph paper, because for the pattern original sizes necessary a large number of paper or film. It is also better to think about the consumption of fabric and the location of patterns in advance, this will allow you to manage the material wisely.

Selecting fabric by type and color

It is better to select the fabric for the cover taking into account it performance characteristics. You should have a good understanding of the purposes for which the furniture is used and where it will be placed. The color of the fabric is chosen by the owner of the sofa, taking into account personal taste preferences. Properly selected fabric and a well-sewn cover can make a sofa a real highlight of the room. Or, conversely, you can make it invisible, allowing you to increase the emphasis on other interior items. Skilled craftswomen can knit a cover.

Sewing

There are no special tricks in sewing this product. When cutting out parts, especially if there are a lot of them, it is better to make symbols in order to follow the order of their stitching in the future. Sew the parts together on a machine using thick threads and a thick needle. Next, turn the product right side out and place it on the sofa. You can come up with a variety of decorative elements and decorations. Many craftswomen can knit a cover from beautiful, eye-catching yarn.

Update the upholstery

This method of updating the coating is more complex and time-consuming. During the work, beginners may have some difficulties with developing a pattern, as well as dismantling the structure.

Choosing fabric for upholstery

You need to approach the issue of choosing upholstery material with special care. It is worth taking into account the wear resistance and strength of the material, as well as its color component and texture features. The sofa should fit harmoniously into general interior apartments. The material should be pleasant to touch, hypoallergenic and not emit unpleasant odors. You can choose washable, smooth, pile and other types of surfaces. Pet lovers choose durable fabrics that are more resistant to possible scratches. The following types of fabrics are most proven for upholstery:

cotton tapestry;
jacquard;
velours;
flock;
microfiber

Measurements

One of the main preparatory stages is to take measurements and create a pattern. For these purposes, you can use the previous coating parts if they were removed carefully enough. The pattern is usually drawn on a flat, clean surface. The floor is perfect for these purposes. The fabric is straightened out on the floor and pre-prepared patterns are traced. When applying, you should take into account the direction of the grain threads of the fabric, the direction of the pile, as well as the pattern. The parts should be laid out compactly across the material so that there are fewer unnecessary pieces. Be sure to leave allowances of about 5 cm for further processing and joining of parts. Next, the parts are cut out and sewn together.

IMPORTANT! To calculate the amount of material, you need to add the length and width of the fabric, and then multiply the resulting number by two. Calculate more carefully for corner sofas. Experts recommend buying fabric with a margin of up to one meter in length.

Required Tools

To reupholster a sofa yourself, you need special materials and equipment:

a piece of fabric or a sewn cover;
hex keys;
flat and Phillips screwdrivers;
scissors;
threads;
sewing machine;
furniture nails;
marker, chalk or piece of soap;
construction stapler;
side cutters and pliers and others.

Progress

The resulting parts are stitched on a sewing machine with strong threads. To begin with, place all the parts in their appropriate places. The fabric is connected to the frame using a hammer, construction nails or a mounting stapler. The edges should be folded inward. The interval between nails should be small and approximately 4 cm. During upholstery, the fabric should be stretched so that it lies evenly and bends well around the surface. The filler is placed while the fabric is being fixed to the part or when the fabric is almost fixed. Next, the remaining parts of the sofa and other parts, such as bolsters, legs, and removable pillows, are assembled.

REFERENCE! Don't be afraid to make a mistake, because you can always take out a paper clip or a nail and start the upholstery again.

Content update

The filling requires more frequent replacement compared to other parts of the sofa. This is especially true for outdated materials.

What you can do yourself

First you need to disassemble the sofa and check the springs. Dismantling is done in the following sequence:

Overhead parts and decorative elements are removed from the sofa.
Next, unscrew the sides, backs, seat and legs, and also remove the sliding elements and fastening mechanisms. If parts are damaged, they must be repaired or replaced. The fixing elements should be removed separate place so that they don't get lost.
The upholstery is removed using an anti-stapler or a flat screwdriver. It is better to save it to use as patterns in the future.
Inspection of springs. With use, they weaken and wear out. These mechanisms cannot be repaired, so most often new parts are installed.
Cleaning the surface from dirt.
Checking the condition of the filler, which is most often foam rubber.

Materials

A variety of materials are used as filler, such as foam rubber, cotton wool, synthetic fluff, PPA and others. They are used both separately and in combination with each other. For example, polyurethane foam is most suitable for a seat, and synthetic fluff for pillows. A layer of batting and coconut coir is often placed on the spring part, and then covered with a layer of padding polyester on top. When choosing a filler, you should pay attention Special attention on his brand. Typically, the manufacturer indicates the density and hardness index. They determine the final cost of the material and its characteristics.

Instructions

The filler also needs to be cut to size. Next, it is laid on the base of each part and fixed using a construction stapler. Due to the additional layer, you can add volume to the back and armrest. But this point needs to be thought through at the stage of making the pattern. If you lay the filler in several layers, then you will need much more material for the upholstery. In the case when the seat is made on the basis of a spring, thick fabric is first placed on it and fixed. Next, all parts of the filler are covered with canvas or other fabric to protect it from dirt and to obtain a more even surface.

It is quite difficult to update a sofa yourself for the first time. Therefore, it is recommended to watch various master classes and training materials. You can take photographs at each stage of furniture disassembly. This will help in the future to repeat the arrangement of parts and mechanisms during assembly. It is also better to make special marks on the parts so that you know from which side they were removed.

ATTENTION! Before starting the repair of upholstered furniture, it is necessary to determine, if possible, what kind of work will need to be done and weigh your strengths in this matter. Also, in order not to lose your sofa for several days, you should prepare the required tools and materials in advance.

Thus, you can update the sofa with your own hands in different ways. accessible ways. In stores you can find all the special devices and do not have to resort to the services of specialized companies. We hope that this article will be useful and help give your favorite upholstered furniture a second life.

A sofa is the most solid and voluminous piece of furniture. But unlike a wardrobe, for example, or a sideboard, it is used much more intensively, and, accordingly, quickly becomes unusable. Moreover, most often the frame and folding mechanism are quite functional, but the upholstery leaves much to be desired.

Updating a sofa at home is not at all difficult.

Decorative method

The simplest and a budget option, which does not require special tricks. At the same time, old furniture is not so much updated as decorated.

Pillows – correctly selected accessories completely change the look of furniture. They are matched to the color of the cover or, conversely, by contrast. An excellent technique is to repeat a characteristic pattern or color combination that is already used on wallpaper or other pieces of furniture. In this way, the new design look is associated with the color scheme of the room. The photo shows fur pillows on leather furniture.

It is important to choose not only the color, but also the texture of the fabric. If the room is made in monochrome, you can make or purchase pillows with a different texture - fur, for example, or, conversely, shiny satin.

A bedspread is an equally successful simple option. The choice of such products is huge, and if you wish, making a bedspread is not difficult. But it is worth noting that the armrests remained visible.

Dustsheet

You can update a corner sofa or a regular one with the help of a cover. Moreover, this can be done not only to update the furniture, but also simply to change the interior. Moreover, a properly sewn cover also covers the armrests.

There are many options:

elastic stretch cover– from leatherette, for example, or a more familiar velvety texture. Thanks to its elasticity, the material tightly grips the seat and back, does not move, and does not bunch up. The design of the product can be very different. An additional advantage of this solution: the fabric is very dense and the cat cannot scratch it;

Sewing a fabric cover at home is somewhat more difficult, but if you have experience, you can do this job. Patterns for both corner and straight models can be found on the Internet. Here you can also find a master class on updating furniture. The photo shows a fabric sofa cover.

How to update an old sofa with your own hands

In some cases - leather sofa, a model made of leatherette, it is impossible to restore the product without reupholstering. This procedure is somewhat more complicated, but it allows you to completely replace the upholstery of the old seat or backrest.

It is worth noting that without reupholstery, furniture, in principle, cannot function for a long time. Furniture makers recommend carrying it out once every 5–10 years, without waiting for obvious abrasions or tears in the fabric. During this time, the material is stretched, and the frame wears out faster because of this.

Even if you have no experience in sewing cereals, you can update the upholstery of the sofa on your own, as well as replace the armrests. If we're talking about O leather trim or leatherette, the work will be somewhat more difficult.

Upgrade steps:

It makes sense to carefully rip apart the upholstery of the old sofa and mark all the details with numbers. The products will serve as a template for the new cover.
The blanks are laid out on fabric. Patterns are made taking into account the tolerance.
If necessary, replace armrests and damaged wooden frame elements.
The cut fragments are sewn together on a sewing machine.
The fragments are placed in their places and secured to the frame with a furniture stapler or nailed with furniture nails. When strengthening, the fabric must be stretched so that the new cover fits tightly.

To be on the safe side, you should watch a master class that describes in detail how to update a sofa with your own hands.

Do you want to create unique interior at no extra cost?

Old furniture will help you with this, photos of the conversion of which you can find here. There are many ways to transform old, familiar objects.

The choice of method depends on the purpose of using the furniture and the type of coating, as well as its condition at the time of repair.

You can find a step-by-step photo master class on making furniture with your own hands from old interior items on our website. The process of updating furniture includes two main stages:

repair;
decoration.

Let's take a closer look at what you should focus on.

Table repair

Tables are classified according to functionality into desks, dining tables, kitchen tables and coffee tables. Depending on their purpose, their structure and, consequently, the restoration process also differ. Usually, dining tables consist of 4 legs, a bow and a table top. They can be solid or folding. When remodeling such furniture, it is worth paying special attention to the condition of all elements, as well as their fastening. The legs must be identical, without damage. If necessary, they can be replaced.

The tabletop, in turn, is the main part of the table. Its surface should be smooth, without grooves, cracks and corrosion. If necessary, wood putty can be used to achieve the desired effect. With its help, you can easily and quickly eliminate all surface imperfections. If necessary, it can also be used to repair legs. The same scheme is used when repairing coffee tables.

Kitchen tables have their own characteristics. Before starting repairs, it is necessary to conduct a full inspection of this piece of furniture. The strength of the countertop plays an important role. It must withstand heavy loads and physical impact. In this regard, the base on which it is installed must also be strong.

An example of using wood putty, which will help correct all the unevenness of an old countertop

Note! Kitchen tables are not only a place to work, but are also used to store kitchen utensils. To do this, they have built-in drawers, shelves and doors. They deserve special attention.

If the table is equipped with shelves, then you should pay attention to their fasteners. If necessary, you can purchase special caps made of wood or plastic from a furniture store; a thin, durable metal corner can also be used as a fastening for shelves. Pay attention to the condition of the canopies that secure the door. It is best to replace them with new ones, since with frequent use this part is subject to the greatest wear.

Natural wood is given freshness by special polishing agents, which can be found in any hardware or furniture store.

If the table is equipped with drawers, check how firmly their walls and bottom are connected. To make them easier to use, you can replace the fittings with which the drawers are pulled out. You can buy it at a furniture store. You can also buy it there various types comfortable handles.

Advice! When replacing awnings, choose ones that are designed for furniture. They will ensure more convenient and reliable operation of the doors.

When repairing a desk, you should pay attention to all of the above. After watching a detailed master class on remaking old furniture with your own hands, you can repeat it yourself.

Repair of cabinets and bedside tables

Every home has furniture that is designed for storage. As a rule, these are cabinets and cabinets of different types and sizes. They can be different in height, depth, and capacity. Moreover, each of them can become a real decoration for your apartment. To do this, see how to restore old furniture with your own hands below.

A rather extravagant and extraordinary element of the interior is a bedside table made from an old suitcase.

First of all, you should inspect all the shelf fastenings and, if necessary, replace them with new ones. You can also replace the drawer fastenings with more functional and modern ones.

Depending on the size, door fastening methods may vary. Canopies are used for cabinets and small cabinets. They wear out quickly, so when carrying out repairs, it is best to replace them with new ones.

If you are remodeling a large wardrobe and it has moving doors, then over time its fittings may wear out. In a furniture store you can find special fastening rollers for sliding cabinet doors.

How impressive restored old furniture looks in this case, see below in the photo.

Chair repair

It’s hard to imagine any home without chairs. Today it is such a commonplace item that few people pay attention to it. This can happen in two cases - either when the chair is properly designed as an interior item, or when it breaks. We will look at how to get from the second option to the first.

Option for restoring old armchairs with covers in vintage style

The chair consists of three main elements:

legs;
seats;
backrests

All of them can fail sooner or later. If the breakage is caused by the legs, then they must be firmly secured, as otherwise the use of the chair becomes dangerous. If the seat is broken, it can be replaced by cutting out a corresponding piece from plywood or fiberboard. The same can be done with the back. You can also make the stool soft if desired. To do this, soft foam-based upholstery must be attached to the seat and backrest.

Advice! If you decide to install or replace the upholstery on a chair, it is best to use fabric stitched to the foam. You can find one in a textile store, and you should attach it using a construction stapler.

Old furniture: photos of design options using painting

As you know, any piece of furniture should be not only functional, but also attractive. Therefore, when old furniture is updated, a photo of which you can see below, it is necessary to divide the work into several stages. The first stage is surface preparation.

It is necessary to clean the furniture from traces of old paint, varnish, and dirt. After this, it is necessary to fill the cracks, if any, and then apply a primer. Next you can apply the base. To do this, you need to choose paint of the appropriate color.

New life for an old bed frame natural wood– painted in soft turquoise

Advice! It is best to use acrylic paint on water based. It does not contain toxic substances, does not emit a strong odor and dries quickly. At the same time, the surface takes on a glossy, attractive appearance. But if you are good with an aerosol can, then this will do.

Decoration

Restoration of old furniture, photos of which are presented below, includes decor. you can use various techniques and combine them. The most common is decoupage. To do this you will need the following:

the required image printed on paper;
PVA glue;
glue brush;
varnish, preferably water-based acrylic;
brush for applying varnish.

Decoupage is a fascinating activity, and furniture made using this technique looks very delicate and unusual.

Advice! It is best to use large colored napkins with appropriate motifs as images.

Lubricate the surface with glue, carefully apply and smooth the picture. Let everything dry a little, then open it with varnish. It is worth noting that there is no doubt about the effectiveness of using this method when restoring old furniture with your own hands.

Another equally interesting decoration method is applying patterns using lace. For this you will need:

lace;
paint of the appropriate color;
scotch.

Take a piece of lace and apply it to the place you plan to decorate. Secure the ends with tape. It is advisable to cover the remaining area with paper or film. Apply paint with a brush or use aerosol cans. Let the product dry. Remove the tape, paper and lace.

Advice! If you want to decorate large area, then it is best to use a piece of guipure of the appropriate size.

Both of the above methods are quite effective. Instead of lace and guipure, you can use paper templates. As a rule, often when decoupage and restoration of old furniture, wallpaper left over after renovation is used.

Upholstery of upholstered furniture

Over time, the upholstery of sofas and armchairs not only loses its attractive appearance, but can also sag significantly and become not as soft as before. But if you don’t want to throw away your favorite piece of furniture or don’t have the funds to buy a new one, you can reupholster it at home.

Renovated shabby chic dining room

A detailed master class on how to remake furniture with your own hands and photo examples are presented on our website. You will need to purchase the appropriate fabric from which the new upholstery will be made. It could be:

barrack;
velours;
leatherette;
crepe;
Alcantara;
leather, etc.

The choice of upholstery material depends on your financial opportunities. You can purchase it either in a textile store or in a specialized furniture store. You will also need a construction stapler and staples for it.

It is best to get rid of old upholstery. It can be secured with glue. In this case you will need construction knife or (if staples are attached) you will have to use a flathead screwdriver. After removing the old trim, begin installing the new one.

A small master class on replacing the upholstery of an old pouf

Cut the required piece of upholstery, place it so that the edges overlap where the old one ends, and attach it with a stapler. You can carry out such manipulations both with the soft part and with the back and sides.

If upholstered furniture has lost its volume and softness, they can be returned by replacing foam rubber. It must be secured with special small nails. If you are afraid that such manipulations are beyond your power, then you can stick foam rubber on top of the old upholstery and cover it with new one. But it is worth considering that the furniture should not lose its functionality.

Adding new volume to the seat of an old chair

You can add any volume to your product. To do this, you need to choose foam rubber of the appropriate thickness. If present folding mechanism, then after reupholstering it should function as before.

Advice! If you need to replace the upholstery and restore its volume, it is advisable to use fabric stitched to the foam rubber. You can purchase it at a specialized store or sew both materials yourself.

Decorating upholstery of upholstered furniture

If you change both layers of upholstery, you can apply different types of decoration options that will give your furniture a more aesthetic appearance. There are lots of ways to do this. We will look at the two most common:

The fabric used for covering can be sewn using patterned seams. This will create a special decorative effect.
Buy buttons or textile clips and use them to tighten the fabric and foam, connecting them together.

Updating upholstered furniture with a cover

A more economical and simple way to hide stains is to sew covers. To do this, you can choose any fabric you like. It is important that it is durable. Most often used for this purpose:

barrack;
velours;
velvet;
jeans;
calico;
and others.

Having taken measurements according to the size of the sofa, you can sew a cover that will cover the back, seat and, if necessary, the side of your sofa.

A small master class on sewing a replacement cover for a pouf

When making a cover, you can use various decorative techniques. You can place embroidery in a certain place. If desired, you can sew on an applique. To do this, fragments of the design are cut out from pieces of fabric and sewn to the base, forming a single picture.

You can also use patchwork, which is popular today - the art of making products from scraps. In this case, you can use pieces of old unnecessary things to make a cover.

Renewing the existing building using plywood

Scuffs, stains and even torn upholstery can be hidden using a special lining. To make it you will need:

plywood;
small metal corners;
the smallest furniture screws.

You can cut the plywood yourself or seek help from specialists where you will purchase it. You will need 5 pieces according to the size of your animal. The cover should cover its outer, inner, back, front and top parts. After taking measurements, simply make 5 corresponding rectangles and fasten them from the inside of the structure using corners and self-tapping screws.

Next, you just need to put the structure on the frame. It can not only serve as decor, but also be quite functional. You can use the overlay as a mini table. If necessary, apply paint or decorate it in any way convenient for you.

Advice! After making the plywood trim, sand it on both sides with sandpaper.

Good afternoon - today I will show you how to reupholster an old sofa, armchair, stool and ottoman with your own hands. I will tell you everything step by step - how to remove the upholstery from the seats, backs and armrests of sofas and armchairs. How to make new upholstery and how to sew it onto a sofa frame. And to make it more interesting and fun for you, I chose furniture in patchwork style. These fun, colorful patchwork sofas and armchairs will inspire you to take on some DIY projects.

The patchwork style (or patchwork, as it is called) is very beautiful in any interior. In this article we...

Let's look at the exclusive upholstery of furniture in this patchwork style.
And I will also give some ideas - HOW TO MAKE small pieces of furniture WITH YOUR OWN HANDS - ottomans, chairs, armchairs and sofas in patchwork style. That is, I WILL SHOW STEP BY STEP how to change the upholstery of an ordinary piece of furniture to a fashionable patchwork one.

So let's start getting acquainted with the patchwork style for upholstered furniture.

Patchwork sofa - made from tapestries and furniture fabric.

Here's an example of how matching tapestry fabric can also give an interesting patchwork effect. The sofa turns out to be very picturesque. I will tell you how to replace the upholstery of a sofa in the same article (just below).

But on this patchwork sofa (photo below) we see combinations of different fabric textures. Their roughness and density are approximately the same(this is important in patchwork) - but the texture is different, with a velvet coating of the pattern, with relief stripes, with convex textile spots under crocodile skin.

And here is a patchwork sofa with a bold combination of upholstery colors, where semi-matte fabrics are adjacent to satin gloss, and colorful fabrics are adjacent to patterned and plain ones.

But in the photo below is an example of patchwork, when the upholstery is made from different fabrics, united by a common FLORAL THEME. A very beautiful replacement for furniture upholstery. Below I will tell you how to do such a change of upholstery with your own hands.

And here is an example of a sofa, where all the flaps have same square shape– tiled effect.

Such upholstery for a sofa is created in the same way as ordinary ones... Only the fabric for updating is not taken whole, but already cut and sewn from scraps. Such a patchwork fabric is spread on the floor and the necessary element is cut out from it for upholstery of the back, seat or armrest.

Sofas are fairly simple pieces of furniture.

And don't be afraid of them.

The sofa consists of three elements - a wooden frame + springs or foam rubber + upholstery fabric.

In the photo below we see a wooden frame. And furniture strips are attached to this sofa frame (crosswise), and furniture springs are already sewn to them (also visible in the photo). Then foam rubber and another layer of elastic padding are simply laid on top, and then fabric is placed on top.

As a result, we get a sofa like this (by the way, it would be more fun in a patchwork style).

HOW TO CHANGE THE UPHOLSTERY of a sofa or chair - with your own hands.

Patchwork upholstery of a chair or sofa can be done at home. It's simple.

I remember in my childhood, When the upholstery of our chairs and sofa began to look not quite fresh, my parents unscrewed the bolts and disassembled the sofa.

That is, they pressed out the metal staples (with which the upholstery is nailed to the wood-foam frame.

Then they removed the upholstery, turned it over with the fresh side out and stapled it back.

Although I’m lying (we didn’t know staplers and staples then). So dad nailed all the upholstery with tiny nails with plastic spacer heads. The result was elegant new furniture. We were very proud that we updated the furniture like this.

Using the same principle, you can make a patchwork chair in a patchwork style with your own hands

If your sofa or chair is not solid frame - but consists of individual parts, then you need to disassemble it, unscrew the bolts, disconnect the parts from each other
Using a flat-head screwdriver, pry out and press out the staples holding the upholstery fabric on each part and remove the upholstery.

Removing the upholstery of a chair or chair is faster. A small armchair or stool. That's why the work will pass not that gruelingly long.

And removing the upholstery from the sofa is already more fuss. Here in the photo we see how this process occurs.

After the upholstery is removed (it goes to the pattern sample).

And the sofa frame with foam rubber can be modified... If the foam rubber is pressed in, it can be replaced (partially or completely) or foam rubber can be placed in the dented places.

And I myself The WOODEN FRAME of the sofa can be painted in a new color. Like in the photo below - we make a white frame from a dark frame (we paint it with acrylic paint - it is odorless, it can be glossy or matte).

And the upholstery removed from the sofa (or armchair or chair) will be a sample for cutting a new one. Here in the photo below, we see how the old upholstery is used as a template for cutting out new upholstery.

We will only install our old upholstery parts onto a ready-made patchwork fabric. I'll tell you how to make a patchwork fabric in a special lesson(and then a link to it will work here).

We make a patchwork fabric - we put it on it old upholstery– trace with chalk and cut along the contour.
And we nail the new patchwork upholstery (a copy of the old one in shape) back to the wood-foam part of the armchair, sofa, chair. To do this, you can rent a stapler (tool rental services are available everywhere, you can find them in the newspaper or on the Internet).

And we do this with each piece of the pattern - we return the new upholstery piece to its place on the wooden furniture frame.
Then we assemble the chair again - we put the parts together - we tighten the bolts. And we get a new handmade patchwork chair.

But if the foam on your chair is worn out, then it would be a good idea to replace the foam filling of the sofa and chair too. To do this, you can call a trained person (or watch a few videos on YouTube on this topic and try to do it yourself). In fact, it's not that difficult anymore.

This is how beautiful patchwork furniture looks in the interior of a modern home.

Renew an old chair - everyone can do it. You just have to start... then continue... and then finish. That's all.))

But if you doubt your abilities as a novice craftsman, you can start with a small experiment - replacing the upholstery with small item furniture. For example, on a chair.

HOW TO CHANGE THE UPHOLSTERY OF A CHAIR - in patchwork style.

(quick and easy with your own hands)

We treat the upholstery of old chairs in the same way as with the upholstery of a chair - it can be replaced simply and easily.

The seats can be removed very easily - even with my almost childish hands (I was 17 years old) I made new upholstery for the chairs... Without any master classes - just on a whim: let me, I think, I’ll see how all this is removed here. And I figured it out - I made new seats. She was as happy as an elephant.

Here's how to replace a chair's upholstery:

They removed the seat from the chair, wrapped it in new upholstery patchwork fabric, the edges of the fabric were turned to the wrong side and secured with staples.

And then they sewed a piece on top of this seat bottom thick fabric(white fabric in the photo below) so that it covers all our uneven edges of the flaps. E That underlying tissue was also fixed with staples. You can apply glue or double-sided tape here and there (optional).

And a note...

Sometimes it happens that an old chair's plywood seat (on which the foam rubber is attached) has decayed or broken.

Then you can cut a new one out of plywood. Or you can do base for the seat made of fastening rigid furniture tapes. They are stapled crosswise to the frame of the chair (like in the photo below) and a foam seat is attached to this base.

Then such a wicker base on the back side of the chair is sewn up with canvas - also using staples (photo below).

Also, if you sew such FURNITURE STANDARDS on the back of a chair, you can completely change its shape and turn the chair into a small chair.

And then our patchwork chair with a new shape of a solid back will look completely different.

DIY CHAIR COVER – in patchwork style.

Here we see a simple cutting of a chair cover, where each plane is cut out separately - the back separately, the sides of the cover separately.

And the upper surface of the seat and back of the chair cover is made of separate long strips of fabric, which are sewn together lengthwise (with a patchwork seam).

And then when we get uniform striped fabric upper part, we sew flower appliqués onto it (see in the photo, there are flowers on the back of the chair).

We are these flowers cut out from the fabric on which they are drawn, we glue them to our part of the front of the seat back, glue them onto double-sided adhesive interlining or dublerin (such web fabric is sold in fabric and sewing stores). And when the flowers have been thoroughly ironed and glued to the double-sided double-sided paper, we sew them along the contour (along the edges) with a machine stitch.

And then we sew together all sides of the cover - the backrest + sides + back side of the cover.

By the way (as can be seen in the photo), along the bottom of such a cover you can also glue and sew flower patterns cut out of fabric.

You can also do For chairs, these are patchwork seat cushions.

How to do quilted fabric (with depressed pits)– I’ll tell you now... when we get to replacing the upholstery on the ottomans.

In the meantime, look at this wonderful stool in patchwork style.

The stools are also covered with elegant patchwork upholstery on the same principle...

A foam circle (or square) sits on the glue directly on the seat of the stool.
Then patchwork fabric is placed on top.
The edges of the fabric are folded over the sides of the stool and secured with a stapler.

You can also nail a board to such a stool - for the back (low as in the photo above) and then you will get almost a chair. We wrap this wooden extended back with foam rubber (we put it on glue and staples) and also upholster it with patchwork fabric.

And here’s another idea for do-it-yourself patchwork upholstery – these round armchairs.

Round CHAIRS - with patchwork style upholstery.

To get a pattern for this semicircular chair cover, need to be attached sheet of tissue paper to the back of the chair and trace all the lines with a pencil.

After put the paper on the carpet and straighten the lines, removing their excess curvature of a sloppy pencil sketch.

And then when we have this semicircular pattern for future patchwork chair covers. We can come up with a mosaic filling for it with different pieces of fabric. Complete with applique, embroidery, patches of knitted elements (flowers can be crocheted).

We simply sew such upholstery onto the back of the chair (without a stapler or iron staples) - we wrapped the cover around the back and secured the edges of the patchwork covering with threads - at the bottom with a long seam along its entire edge.

Well, now let’s move on to patchwork style ottomans. We will also make them ourselves.

POTTSONS AND BENCHES – in patchwork style (with patchwork upholstery)

Your ottoman can be any shape: long or small.

It can be made in the same color as the chair. If you have an old ottoman with a dented seat, then it's time to breathe new life into it. Throw away old flattened foam rubber and buy a new one (from a fabric store or hardware store) and create new furniture for your home with your own hands - ottoman in patchwork style.

Its surface can be smooth when the patchwork fabric simply covers the rectangle cut out of foam rubber.

Replacing the upholstery on an ottoman– this is a fairly simple job (compared to an armchair and a sofa).

Therefore, if this is your first experience in updating the upholstery, then start with an ottoman. You'll enjoy the quick results and gain the confidence to take on more serious reupholstery feats. And then you’ll go for grandma’s old chair.

Another surface of the patchwork ottoman can be quilted

HOW TO MAKE A QUILT SURFACE FOR AN OTTOMAN IN PATCHWORK STYLE.

Step one - buttons are made.

Fabric buttons are ordinary buttons with long stems that are wrapped in the same fabric. We wrapped the fabric at the top and at the bottom of the leg, secured it with threads, and held it tight.

Step two - sew the buttons in the right places.

We sew such fabric buttons in even rows to our patchwork fabric.

You can immediately mark the locations of future holes on the foam seat with a felt-tip pen. And by attaching the patchwork fabric to the foam rubber, check the correctness of the rows as you sew on the buttons.

STEP three - create a quilted surface.

When the canvas is laid on the foam cushion, we again pull the thread into each sewn button - we make several turns through the eye of the button and pierce the foam rubber through - into the stretch - so that the button is pressed into the foam rubber.

On the back side of the foam rubber (bottom), we also pick up a button (it doesn’t have to be fancy - a simple button will do) and, threading the thread through the bottom button (under the foam rubber), we again go up through the foam rubber to the top fancy button.

And we do this several times for strength. we pull the thread from the top button (on the patchwork surface) to the bottom button (which is underneath the foam) - and back... And we get a quilted surface - simply and quickly

But you can sew such soft ottomans yourself - without wooden frame. Filler: synthetic winterizer or foam rubber.

And from the leftover fabric you can make a patchwork frame for a mirror...

Here are some ideas for updating the furniture in your home.

I hope this article has inspired you, and most importantly, relieved the “indecision syndrome” that most novice self-taught craftsmen suffer from.

Everything is simple - and everything is easy... If just START doing things.

Start small– update the upholstery on an old ottoman, chair, stool. If you don't have old furniture in your house, your friends will have it. Or you can buy it for next to nothing at any of the online flea markets. Buy for 100 rubles and turn it into a spectacular thing for 5,000.

Good luck with your bold creativity.

Olga Klishevskaya, especially for the site

A thorough renovation of a room during renovation will be incomplete if you do not take care of its furnishings. You can, of course, buy a completely new set to match the new image of the room. But is it worth categorically abandoning an antique chest of drawers or grandma’s sofa if they are dear to you and can still serve faithfully?

You can make a stylish, bright designer piece out of an old sofa; you just need to paint the base and reupholster the upholstered part.

However, for this you will have to make a little effort of your own. Surely you will immediately have to decide how to update the sofa with your own hands, since this thing is one of the most common pieces of furniture for any home. Therefore, it is quite natural that the transformation of a somewhat outdated interior into a new way will begin with the sofa.

Materials and tools needed for work

The following materials, tools and accessories will help you quickly and efficiently update your sofa, which it is advisable to stock up on in advance:

To reupholster furniture you will need: drill, screwdriver, ruler, knife, scissors, hammer, stapler, furniture nails.

flat and Phillips screwdrivers;
a set of locksmith's keys;
pliers;
side cutters;
wire cutters;
mounting stapler;
hammer for shoemaking;
sewing machine;
scissors;
marker (chalk);
needles and threads;
furniture nails.

Return to contents

Preparatory operations: disassembly, checking springs, cutting

To implement full cycle For restoration, the old sofa must first be disassembled. Moreover, disassembly must be carried out in a certain order in order to complete the work with high quality. In many cases this will not be difficult to do, since manufacturers most often make cabinet sofas, which greatly facilitates repair and restoration operations.

The pillows, backrests, ottomans and other overhead elements on it are removed from the specified item. Then use a screwdriver and side cutters (pliers) to remove the old upholstery. This should be done very carefully, since worn-out fabric can tear due to careless movement, and it will later be needed intact.

After "exposure" internal space It is imperative to check the integrity and performance of the wooden frame, springs and filler. Cracked or rotten frame bars are replaced with new ones. Also, metal springs (if, of course, they are present in the sofa) are replaced without repair in case of severe wear, weakness or cracks.

When restoring upholstered furniture, it is advisable to change the filling, regardless of its appearance. The fact is that foam rubber, which is most often used as a material for the specified sofa component, is a very short-lived raw material.

Since in recent years the industry has developed many different modern materials for the field furniture production, it is recommended to take one of these materials, such as latex or polyurethane foam, instead of foam rubber. For our case, these polymers are valuable because they are designed for a long service life and “hold” their given shape perfectly. At the same time, dense and cheap material (burlap, cotton fabric, etc.) will be used for auxiliary upholstery of the internal elements of the frame, hidden from the human eye.

Now you can start making a pattern for the new upholstery. Old upholstery fabric is used as a kind of pattern for it. It is for this reason that it should be treated with particular care when removed from the frame.

It is better to mark the removed upholstery where it was located, and use it to cut out a new one.

It is strongly recommended that all removed pieces of upholstery be marked where exactly on the sofa they were located and carefully laid out on the floor. This will make it easier to determine the total volume of new fabric that will have to be purchased for the reupholstery.

After the fabric is purchased, new pieces are cut from the old scraps. Subsequently, they will need to be sewn, maintaining the pattern and paying attention to the quality of the stitches.

Return to contents

Reupholstering old furniture: procedure

To update means to reupholster it.

This term means complete replacement outdated fabric “cover” with a new coating in compliance with all technological nuances, which were used during the initial assembly of the sofa.

By the way, experts advise doing this periodically every 5-10 years. Over approximately this period, the fabric and frame wear out greatly, and the owner of the specified item begins another rearrangement in his apartment. And if he does not get the feeling that the sofa is morally outdated, then the new zigzag of fashion will force the person to take up updating his furnishings.

To update the frame, wooden blocks of the same size are used, they are nailed in several places.

The reupholstering process begins with the installation of new rigid frame elements - bars and springs. To replace damaged wooden elements, new bars must be cut in strict accordance with the dimensions of the old ones. During installation, metal fasteners and furniture glue are used. It is better to select suitable springs without special skills with the help of specialists.

The cut new fabric fragments along the edges must first be stitched on a sewing machine. After this, they are placed in the places where their previous “doubles” were previously located. Next, they are nailed to the frame with furniture nails or using a stapler, all the time bending the edges of the fabric inward so that rough, unsightly seams do not form. At the same time, you should constantly stretch the fabric.

According to another version of the reupholstery, you should sew original covers from fabric blanks, the shape and size corresponding to the seat upholstery and the back of the sofa. When the covers are ready, they are simply put on the specified structures and sewn up. Finally, the individual removable parts of the sofa are assembled in the reverse order of disassembly. Renovated or new ones are attached to updated furniture decorative overlays, pillows.

Renewing old upholstered furniture

Sometimes people become attached not only to living beings, but also to the city, home and even furniture. After all, sometimes you don’t want to throw away your favorite chair or ottoman, which brings you warmth, coziness and convenience. But what to do if your favorite thing is outdated? Believe me, it is not as difficult as it seems at first glance. You just need to breathe new life into it, that is, update the upholstered furniture. Of course, you can call specialists and pay a lot of money to reupholster and reconstruct furniture, but it will be easier and more interesting to do it yourself, putting all your original ideas into your favorite thing.

First, make a sketch of your plan, think about what your “new” furniture will look like. The decor style of the converted product must necessarily match the entire appearance of the room or space. Thus, by choosing suitable textiles, you can easily and for little money update and add fashionable chic to even the most “decrepit” sofa or soft ottoman.

Style

By choosing the right design style, you can transform any outdated upholstered furniture beyond recognition:

sofa in modern style

The glamorous empire style prefers strict lines and striking color contrast. Upholstery in bright red, yellow mixed with rich lilac, pearl gray or white will make your old chair the best showpiece in the interior of the room;

For minimalism, use monochrome color tones, simple textures and bright warm shades;

The country style, beloved by many, suggests the use of rough fabrics and provincial simplicity (burlap, thick fabrics, canvas).

Ways to update upholstered furniture

The first and easiest way is to sew covers on the sofa, armchairs or chairs. Today this is a fairly fashionable and popular option, in which updating upholstered furniture occurs quite quickly and without special costs. Heavy velvet covers or light and cheerful “clothes” for furniture with all sorts of decorative elements in the form of ruffles, ruffles or bows will perfectly update your “worn” furniture. In addition, the covers are quite practical. After all, they can always be washed or replaced with new ones. Having purchased required material and sewing the chosen style, having previously treated all the edges with an overlocker, the cover should be secured with an elastic band so that it does not slip off the furniture.

The second way is to create an applique that will be appropriate on both new upholstery and old fabric. With its help, you can hide the flaws that have formed or even give the furniture your own special style. Applications can be sewn onto upholstery fabric, glued, or applied with special fabric paints under a stencil.

updated sofa with new upholstery

But the most common method is reupholstery. At the same time, the very shape of the old furniture will remain the same, but its appearance, using fabric with bright color, unusual texture, can be radically changed. When starting work, you must first completely disassemble the old product.

Reupholstering a sofa or easy chair

For reupholstery you will need:

Foam rubber. It is used to make the product soft.
To separate upholstery and internal filler padding polyester is used.
The upholstery fabric itself. For furniture that will often be used for its intended purpose, it is best to choose a dense and wear-resistant material.
Working tools: a fairly sharp knife, a ruler, scissors, a construction tape and a special stapler with staples.

As mentioned earlier, the fabric for the constriction should be very dense. Synthetic leather, beautiful jacquard or tapestry are perfect here. It is very important to calculate correctly required quantity footage with a good and sufficient margin. If the upholstery material has a pattern, then to combine all its details it is necessary to increase the fabric consumption by about 25%.

sofa cover

After you remove the old upholstery, do not rush to throw it away, because it can become a good pattern for a new covering. Spread out on the floor new fabric face down, place the old one on it and straighten it thoroughly, removing all unnecessary wrinkles. When drawing an outline, be sure to learn what old material may become deformed during use of the product. When carefully cutting out the stencil for future upholstery with scissors, it is better to make a larger allowance for allowances. All excess fabric is removed during work.

The next stage is replacing and laying foam rubber on those parts that need to be updated. Then we put padding polyester and cover it with new upholstery material. After making sure that the upholstery is in the desired position, we fix it with a stapler. The staples need to be fastened every 2 cm, making a careful bend and watching the upholstery so that it does not wrinkle or move.

Pay due attention and wooden elements upholstered furniture, because they have also become worn out over time and need proper restoration. It is best to re-varnish wooden openwork overlays, armrests, legs and other solid elements or paint them (also under varnish), if it is appropriate in the overall style of the room. Wooden surface first carefully processed with sandpaper. Cracks should be eliminated using a special putty for wood, followed by surface treatment, but with fine sandpaper. After all the preparatory procedures, the wood is coated with varnish of a suitable color.

Using this simple principle, you can update any old furniture. Of course, every task requires skill and experience, and in order to understand all the intricacies of the work, it is better to start with simple products, for example, an ottoman or a chair, and only then begin updating more complex upholstered furniture.

http://mebelvbloge.ru

Do you want to create a unique interior without extra costs?

Old furniture will help you with this, photos of the conversion of which you can find here. There are many ways to transform old, familiar objects.

The choice of method depends on the purpose of using the furniture and the type of coating, as well as its condition at the time of repair.

You can find a step-by-step photo master class on making furniture with your own hands from old interior items on our website. The process of updating furniture includes two main stages:

repair;
decoration.

Let's take a closer look at what you should focus on.

Table repair

Tables are classified according to functionality into desks, dining tables, kitchen tables and coffee tables. Depending on their purpose, their structure and, consequently, the restoration process also differ. Typically, dining tables consist of 4 legs, a bow and a tabletop. They can be solid or folding. When remodeling such furniture, it is worth paying special attention to the condition of all elements, as well as their fastening. The legs must be identical, without damage. If necessary, they can be replaced.

An example of using wood putty, which will help correct all the unevenness of an old countertop

Note! Kitchen tables are not only a place to work, but are also used to store kitchen utensils. To do this, they have built-in drawers, shelves and doors. They deserve special attention.

Natural wood is given freshness by special polishing agents, which can be found in any hardware or furniture store.

Advice! When replacing awnings, choose ones that are designed for furniture. They will ensure more convenient and reliable operation of the doors.

When repairing a desk, you should pay attention to all of the above. After watching a detailed master class on remaking old furniture with your own hands, you can repeat it yourself.

Repair of cabinets and bedside tables

A rather extravagant and extraordinary element of the interior is a bedside table made from an old suitcase.

First of all, you should inspect all the shelf fastenings and, if necessary, replace them with new ones. You can also replace the drawer fastenings with more functional and modern ones.

If you are remodeling a large wardrobe and it has moving doors, then over time its fittings may wear out. In a furniture store you can find special fastening rollers for sliding cabinet doors.

How impressive restored old furniture looks in this case, see below in the photo.

Chair repair

An option for restoring old armchairs with covers in a vintage style

The chair consists of three main elements:

legs;
seats;
backrests

Advice! If you decide to install or replace the upholstery on a chair, it is best to use fabric stitched to the foam. You can find one in a textile store, and you should attach it using a construction stapler.

Old furniture: photos of design options using painting

New life for the frame of an old bed made of natural wood - painting it in delicate turquoise

Advice! It is best to use water-based acrylic paint. It does not contain toxic substances, does not emit a strong odor and dries quickly. At the same time, the surface takes on a glossy, attractive appearance. But if you are good with an aerosol can, then this will do.

Decoration

Restoration of old furniture, photos of which are presented below, includes decor. You can use different techniques and combine them. The most common is decoupage. To do this you will need the following:

the required image printed on paper;
PVA glue;
glue brush;
varnish, preferably water-based acrylic;
brush for applying varnish.

Decoupage is a fascinating activity, and furniture made using this technique looks very delicate and unusual.

Advice! It is best to use large colored napkins with appropriate motifs as images.

Another equally interesting decoration method is applying patterns using lace. For this you will need:

lace;
paint of the appropriate color;
scotch.

Advice! If you want to decorate a large area, it is best to use a piece of guipure of the appropriate size.

Upholstery of upholstered furniture

Renovated shabby chic dining room

barrack;
velours;
leatherette;
crepe;
Alcantara;
leather, etc.

The choice of upholstery material depends on your financial capabilities. You can purchase it either in a textile store or in a specialized furniture store. You will also need a construction stapler and staples for it.

It is best to get rid of old upholstery. It can be secured with glue. In this case, you will need a utility knife or (if staples are attached) you will have to use a flathead screwdriver. After removing the old trim, begin installing the new one.

A small master class on replacing the upholstery of an old pouf

Adding new volume to the seat of an old chair

You can add any volume to your product. To do this, you need to choose foam rubber of the appropriate thickness. If there is a folding mechanism, then after reupholstering it should function as before.

Advice! If you need to replace the upholstery and restore its volume, it is advisable to use fabric stitched to the foam rubber. You can purchase it at a specialized store or sew both materials yourself.

Decorating upholstery of upholstered furniture

The fabric used for covering can be sewn using patterned seams. This will create a special decorative effect.
Buy buttons or textile clips and use them to tighten the fabric and foam, connecting them together.

Updating upholstered furniture with a cover

A more economical and simple way to hide stains is to sew covers. To do this, you can choose any fabric you like. It is important that it is durable. Most often used for this purpose:

barrack;
velours;
velvet;
jeans;
calico;
and others.

Having taken measurements according to the size of the sofa, you can sew a cover that will cover the back, seat and, if necessary, the side of your sofa.

A small master class on sewing a replacement cover for a pouf

You can also use patchwork, which is popular today - the art of making products from scraps. In this case, you can use pieces of old unnecessary things to make a cover.

Renewing the existing building using plywood

Scuffs, stains and even torn upholstery can be hidden using a special lining. To make it you will need:

plywood;
small metal corners;
the smallest furniture screws.

Advice! After making the plywood trim, sand it on both sides with sandpaper.

It always brings joy when we buy something new for our home, such as furniture . Every apartment or house must have armchairs, a sofa, ottomans, and chairs. We use them all the time.

It's hard to imagine an apartment without a sofa, armchairs and other upholstered furniture.

Time passes, the upholstery becomes ugly, wears off in places, holes, stains, traces of paint, felt-tip pens, and plasticine stuck in places appear. All this remains, especially when there are small children in the house. They will take furniture to the extreme in just a few months. The stains cannot be cleaned, the holes cannot be mended, even a bedspread will not save you from their pranks, except perhaps a Euro-cover. Furniture becomes unusable and ceases to decorate the interior.

After a few years, the upholstery may lose its former attractiveness, become unusable and no longer fit into the interior of the room.

Many people simply get rid of it, throw it in a landfill or take it to their country house. Others, on the contrary, cannot get rid of old furniture simply because it is convenient or it’s a pity to throw it away and buy new sofa or a chair is simply not possible. What to do in such cases? There is only one thing left - to restore, make sofa reupholstery . Of course, you can turn to specialists, but it’s easier and much more profitable, in order to save your budget, to do it yourself.

Not everyone knows that reupholstering a sofa with your own hands is not a very difficult task.

It’s a big plus if the sofa has a high-quality base. Old pieces of furniture much better quality than those that are produced now.

Replacing the upholstery will not take much time and effort.

Furniture restoration at home has some advantages.

Are you reupholstering a sofa? any material you like, and you can add pictorial elements to your liking.
When performing work to replace the upholstery, if necessary, you can repair the frame or spring block.
Outdated sofas, as a rule, are the strongest and best quality, prevailing in all properties over modern furniture.
By doing this work yourself, you won’t spend a lot of money, but a new sofa or chair will cost much more.
You don’t have to throw your favorite soft corner into a landfill because it has become unusable.

It’s worth deciding whether you will reupholster the sofa yourself, in which case the work will take more time, or trust the specialists, they will do it in a short period, perhaps at your home, without transporting it to a workshop.

Deciding on the design

To change the appearance of an old sofa, you can sew a new cover, make pillows and throws of various models. Furniture will sparkle with new colors. If you want to constriction , then it can be done partially by replacing some upholstery elements. There are many varieties here - from typical to creative.

It is important that everything is in harmony.

A cape made using the patchwork technique will look extraordinary. You can make an unusual applique and glue it to the upholstery. For reupholstering a sofa denim will do textile or artificial leather. The most commonly used furniture tapestry, high-quality leatherette, leather, special synthetic velor, artificial fur with a strong base, and furniture jacquard. It is quite possible to sew removable covers from clothing fabrics.

If the sofa is not intended for decoration, but for relaxation of all family members, then you will need strong upholstery that will last for quite a long time.

Necessary materials

To begin work on replacing old upholstery, the first step is to decide what fabric you choose the color scheme, with or without a pattern, artificial or natural material. There are many different furniture fabrics.

Each fabric has technologically advanced and multifunctional quality levels.

Let's decide what materials will be needed. Besides the fabric itself Need accessories, foam rubber required thickness, piping to cover the seams, felt, padding polyester or batting as a filler, zipper, marker needles, decorative buttons.

Required Tools

Selected fabric - it needs to be taken with a margin for the possibility of error, now let's prepare the tools that will be needed: a sewing machine, a set of needles, strong threads (polyester), a flat-head screwdriver, a hammer, an anti-stapler to remove old staples, pliers, wrenches (from 8 to 19 mm), side cutters, furniture stapler, scissors, staples (6-8 mm), sewing meter, square, metal ruler, chalk, screwdriver, drill, glue.

The necessary set of tools.

The reupholstering process: step-by-step instructions

All work is divided into stages. First you need to disassemble the furniture . We remove all pillows, cushions, and decorations. Then using necessary tools separate the back and sides of the sofa.

Disassembly with removal of individual components in the form of pillows, sides, poufs.

We dismantle the seat and separate the furniture from the base. The parts needed for fastening need to be placed in some container; they may be needed.

All fasteners are placed together so as not to lose them.

The next step is to remove the worn upholstery using an anti-staple gun or a flat-head screwdriver. old fabric You can leave it - it will be easier to cut out patterns using it. We remove dirt and dust accumulated inside. Old foam rubber should be thrown away and replaced with new one.

The work requires a certain amount of care so as not to tear the old covering and use it as a template for cutting out parts from new fabric.

Let's look at the condition of the spring block and frame. If necessary, we carry out repairs. We strengthen all the joints and tighten the screws.

All screws must be carefully tightened, the joints of the parts must be strengthened, and the wooden joints must be glued.

On old fabric We cut out new patterns from the selected material, leaving seam allowances. We fasten the parts with special needles and stitch them on a sewing machine. If you don't know how to sew, entrust the work to a seamstress.

The result of the entire reupholstery of the product largely depends on the quality of the new patterns.

Now you need to cover the sofa. We attach new upholstery to each individual part, starting with decorative elements, then the seat, sides, back. We carry out the tension carefully so that there is no distortion, using a stapler in the work.

In order not to make a mistake with the amount of material, it is recommended to buy it with a small margin.

The fabric on the sofa parts is stretched evenly so that there are no distortions.

Four centimeters - this should be the gap between the staples. Use the remaining material at your discretion. We attach the foam rubber, and its remains will be useful for upholstering other furniture.

Having finished with the reupholstery, we assemble the structure and return the legs and other fittings to their place.

How to cover a sofa with your own hands?

The most significant point in this work is the acquisition of the required amount of fabric. . You can roughly calculate how much you need by adding the length and width of the sofa and multiplying the resulting amount by two. For example, a sofa has a size of 2 x 1.8, then you will need to buy 7.6 m of fabric. To find out exactly, draw the layout necessary elements, taking into account the fractional direction. You need to be extremely careful when making calculations for corner sofas, because they have a complex shape.

When choosing fabric, you should avoid synthetic and very coarse varieties.

It must be remembered that material having large drawing or striped, it is necessary to cut in one direction, accordingly, the cost of fabric will increase. It is very important to consider seam allowances. You definitely can't go wrong with upholstery fabric. with a margin of one meter. It is worth considering the fact that you will need to change the filler. Compacted foam rubber and a layer of padding polyester are quite suitable for this purpose.

The structure of some pieces of furniture may include parts filled with thick foam rubber. This causes certain difficulties. To avoid this, foam rubber is wrapped in thin padding polyester, then attached and wrapped in upholstery fabric.

High-quality foam rubber has very small pores in its structure. After squeezing with your hand, it immediately straightens and takes its previous shape.

How to reupholster a sofa with your own hands competently and avoid mistakes when sewing parts? It will be better if you familiarize yourself with master classes, watch video and photo lessons, and read the necessary information on the Internet.

This will help to quickly and thoroughly complete necessary work and assemble the parts correctly.

The final stage is decoration

The sofa is the most important piece of furniture. We gather there with the whole family, relax after work, watch TV, and sometimes it’s just great to lie around, covered with a cozy blanket. Its color scheme is significant in the design of a room.

How to make an old sofa sparkle with new colors?

To begin with, you can change the area around the furniture, for example, change the wallpaper or stick photo wallpaper. Picturesque prints will look original. They decorate pillows - choose some image and apply it to the cover. This is best done in a workshop.

You can sew stripes or squares yourself, using fabrics of different colors, or combine them.

The most ideal option is to replace the cover. If you don't want to sew it yourself, buy it at the store. Now there is a very large selection of different colors and models. They have different features, including water-repellent, and even ones that are resistant to the sharp claws of your pets. Well, the simplest option is to cover the sofa with a blanket or two.

This will create a cozy atmosphere that sets you up for relaxation.

Pillows with new covers of different colors will add some zest to the sofa. Saturated shades are best placed in the center, neutral shades are preferable at the edges. If you like a style such as eclecticism, then feel free to use all your imagination - combine incompatible things. Cushions They can be square, round or triangular, large and small, different colors, different fabrics, even fur.

The color of the pillows can be matched to the curtains, lampshade, and chair.

Padding furniture is a fun activity that doesn’t present any particular difficulties. The main thing is to do everything according to the rules, and you will have original old furniture at home that will serve for many years to come.

If we don’t have enough money to buy new furniture or we just don’t want to part with things dear to our hearts, we begin to think about how to update old furniture? Experienced carpenters claim that old frames for sofas, armchairs and chairs are more reliable than new, economical options. In addition, refurbished furniture will cost 1.5-3 times less than the cheapest new one. Moreover, independent restoration of furniture is a creative process that brings moral satisfaction and pride in its result. Moreover, it is not as difficult as it seems at first glance. Repairing furniture items on site will save you a lot of time and effort.

First, you need to establish the cause of the damage and determine ways to eliminate it. Then, you should purchase the necessary material and the right tool. Plain old furniture can be updated simply by painting it. First, check for wood-boring beetles in your furniture. If, nevertheless, you find passages made by them, then they need to be blown out with a pump. Afterwards, it is necessary to drip a special compound against woodworms or regular kerosene into these passages. Before painting, the holes are sealed with wax or wood putty. Now, carefully, without damaging the surface of the wood, remove old paint. Oil paints and varnishes are removed with turpentine or white spirit, alcohol and bakelite varnishes with ethyl alcohol. It is necessary to work in gloves with a paint brush or a cloth swab wound on a wooden stick. Still needed wooden block with an edge cut at an angle for scraping off softened paint. After this, the surface of the furniture must be treated with sandpaper so that it is not rough. Sand along the wood grain. The paint should be based on alkyd resin.

Having painted old chest of drawers and by replacing the old handles with new ones, we got an exclusive item.

Wicker furniture can be made beautiful again by applying a coat of drying oil and then a coat of clear varnish. You can also paint wicker furniture.

If cane furniture is sagging, it can be brought back into proper shape by washing it on both sides with a hot soapy solution and table salt, and then drying it thoroughly. You can clean wicker furniture with a brush dipped in a solution of table salt and dry it on fresh air. If the furniture is simply dusty, clean it with a vacuum cleaner or brush.

You can also update old furniture by covering it with wallpaper. These could be scraps left over from pasting the walls.

An old bed stops squeaking if its parts are wiped with wax.

And cabinet jamming can be eliminated by rubbing the drawers or guide strips with candle wax. If the jamming is more serious, it can be eliminated by sharpening the rubbing surfaces with sandpaper.

A loose cabinet door can be fixed by installing new hinges. Wooden plugs Using glue, you need to drive it into the old sockets from the screws that secured the hinges and fill the sockets with pieces of wire wool. Place new screws under the hinges, slightly longer than the old ones.

Upholstered furniture can be easily updated by replacing old upholstery with modern new ones. There is no need to remove the old upholstery. For work, purchase a furniture stapler, and for the furniture itself, purchase upholstery fabric. If you intend to change the shape of the sofa or armchairs, purchase foam rubber or padding polyester to do this. Using them, you can extend the armrests and headrests of a sofa or chairs and give them the shape of bolsters. Secure the foam with a cord or baste it with threads directly to the old upholstery.

When the base is ready, proceed to the actual upholstery. To do this, first make a pattern for the upholstery, measuring the dimensions of the furniture to be fitted. You can also carefully remove the old upholstery and cut out a new one over it, then securing it with a stapler. The fastening points can be decorated with finishing braid or decorative tape using the same stapler. Sand the wooden armrests and legs with sandpaper and cover them with colored enamel or tinted varnish. By changing the shape and decorating with modern materials, your furniture will sparkle with new colors.

You can also change the covers for the pillows on the sofa by inserting zippers into them.

After updating the sofa and armchairs, change the upholstery on the chairs. It couldn't be easier. Remove the seat and remove the old upholstery. Replace old foam if necessary. Also use a stapler to secure the new upholstery. Sand the wooden parts of the chair and paint them in any color you like and varnish them. Then, secure the seat back to the chair.

Another option is removable covers for armchairs, sofas and chairs. This is a fashion trend and is also very practical, as they can be easily removed for washing or replacement.

The fabric is selected based on general style rooms.

The choice of fabrics is huge: silk, muslin, linen, velvet or fluffy fur.

If you don’t want to sew anything at all or need to quickly update your upholstered furniture, you can simply throw fur over a chair or sofa.

If you don't have experience in upholstering furniture, you can practice on an old chair by sewing a simple cover for it.