03.09.2016 69048

Sometimes emphasizing old age - original solution problems of unsightly sashes. So, beautiful without additional expenses. Of course, the effect should be deliberate - sloppiness is inappropriate in any interior. aging wood with your own hands - methods, tools and materials are described below.

Types of artificial aging of wood

The vintage, original look of doors can be achieved in several ways. Below, they are listed in order of increasing effort and cost. The operating algorithm is also described. So:

• Thermal method or firing. The process will require a blowtorch and a rough brush to age the wood. The intensity of the impact is determined by the master himself - as a result, you can get clearly expressed natural wood patterns or barely visible ones. After firing, the surface of the canvas is sanded with coarse sandpaper in different places to create the appearance of heterogeneity. The door for this method of aging should be massive, made of planks. The fittings are appropriate - massive steel handles and.

How to do it right:

Use a hairdryer or solvent. The canvas is carefully sanded, the boards are knocked down so that there are no gaps. Not bad before aging with all sorts of protection - fire retardant, moisture-retaining composition. Existing cracks are left - they will add even more color. The hinges and handles are removed. The method takes little time and is safe if you have the skills to work with the tool.

• Blackening. The effect is achieved by rubbing shoe polish, stain or a strong manganese solution into the cleaned fabric. Pigmentation lingers on annual rings, cuts, knots and thus, the effect of an opening darkened with age is achieved. In addition, the latter composition helps to disinfect the canvas if traces of mold or mildew are detected during cleaning.

How to do it right:

Everything ingenious is simple! To obtain antique doors, a previously cleaned surface with a solvent and a spatula is covered with black ink, and then the shoe polish melted to a liquid state is rubbed with a brush. You need to rub it hard. The method has a drawback - removed door leaf It is important to ventilate for a week - the smell is unpleasant.

• Bark beetle traces. They represent paths from the movement of the larva. You can create them on antique doors with your own hands using bent nails. Having laid them out on the surface, they hammer them in with a hammer, leaving dents over the entire area. It is important to free the rods from the caps to create a complete imitation. After work, the canvas is sanded with fine sandpaper, making sure that the chip dust gets a little into the grooves. Next, coat with varnish.

These antique effects are very easy and quick to achieve. The style of the apartment or house must be consistent, otherwise the effect will be inappropriate.

Working with paint and varnish

You can get aged doors in other ways. They will require more time and labor. Additionally, costs will increase due to purchasing multiple shades of paint. So:

• A popular dry brush method. The canvas is cleaned and coated with a base primer. Until the layer is completely dry, use the end of a dry brush to apply strokes of a different shade. The combination of colors can be different - contrasting or transitioning from one shade to another. Now the layers are given time to dry. The finished surface is cleaned with sandpaper to further highlight areas of abrasion. A layer of helmet of a different color is applied again. The final color is pale yellow or white, which is used to cover the door in brush strokes. Allow to dry again and then sand. The final layer is varnish.
• Craquelure. This artificial aging of wood is done in several ways:

1. - varnish and silver. A layer of varnish is applied to the prepared surface. After 30 minutes, it is dried with a hair dryer, as a result of which cracks appear. They are rubbed over with silver paint, allowed to dry completely and the resulting effect is covered with varnish.
2. - PVA glue. With its help they create an antique design. The thick layer of glue on the previously cleaned canvas is not allowed to dry completely. A layer of acrylic paint is applied on top of it and then dried with a hair dryer.
3. - gelatin or egg white is another way to age paint on wood. Apply the prepared composition – pre-soaked gelatin or protein – to the painted surface with a wide brush. Allow to dry naturally and varnish.
4. - vinegar 9%. They moisten a freshly painted surface in a horizontal position. Cracks appear immediately.

It is important not to overdo it - the doors should be aged and not rendered unusable.

• Mechanical structuring or brushing. The idea is to remove the soft fibers of the wood and expose the wood structure. For work, a special milling cutter with several attachments is used - a wire brush for structure, a soft brush for cleaning, and emery cloth for polishing.

The door laid on a horizontal surface is cleaned chemically or hot, then it is applied using a machine. You can achieve the effect manually, but it will take more time. First, use a rough nozzle, then remove chips, and finally polish. During each stage, various compounds are applied to the canvas - stain, ink, shoe polish, so that the further transformation of the old wood occurs continuously. The final stage will be varnishing.

• Chemical brushing. Suitable as an effect of aging wood, which does not require the purchase of a special machine. For work, caustic alkalis, acids, and ammonia are used. The process takes place away from residential premises in well-ventilated areas and with the use of personal protection– gloves, glasses, respirator. Is as follows:

1. — the canvas is cleaned and sanded.
2. - wetted by a large number of caustic components.
3. — after softening the soft layers, it is processed with hard wire brushes and polishing.

Using the above methods, it is not difficult to artificially age wood. In addition to the interior, wooden pieces of furniture - legs, armrests - are decorated in the same way.

Features of the wood aging process

Various methods of aging the surface of doors at home require following stages and nuances. For example:

• Cleaning the canvases. Happens using a hair dryer or solvents. A spatula is convenient for removing peeling paint. It is important to remove all visible areas, otherwise they will not get the desired effect. Besides chemical solutions must be suitable for future painting or varnishing - incompatibility will lead to the formation of bubbles and “husks”.
• The chemical method of aging wood - brushing with caustic solutions, staining, occurs only with soft wood species. Pine, spruce are suitable - oak and larch are only susceptible machining.
• The mechanical method is associated with the formation of chips and fine wood dust, so the canvas is periodically moistened with water and debris is swept away from the surface with a soft brush. Not with your hands - to avoid splinters.
• Painting - craquelure, aging wood with your own hands using varnish, dry brush method - must be done with thorough mixing of the compositions so that no air bubbles form on the surface. When they burst, they form ugly pits, and the artificial origin of the canvas becomes clear.

By itself, natural wood beautiful and new canvases are unlikely to need decoration using the methods described. Work should only be carried out on used interior doors, in order to give them a second life and save on buying a new set.

This is a tracing paper from Italian – patina. IN in a broad sense patina – noble signs of aging. The essence of the method: select paint to match the color of the furniture, cover it in one layer and let it dry (sand the surface before painting). Then we make the shade lighter and repeat the procedure. Now we take fine sandpaper or a hard sponge and sculpt the abrasions. It is important that through upper layer the base was visible. It should be obvious that the furniture has been painted more than once. Adjust the degree of shabbyness to your taste. Finally, coat the product with clear varnish or wax.

Patination is suitable not only for wooden surfaces, but also for metal and plaster, for example. Keep this in mind when choosing paint. They differ precisely in the type of material on which you will use them. The most popular are acrylic.

Are you interested in the process? In addition to furniture, you can patina anything - from sockets and baseboards to photo frames. And by the way, it’s better to start practicing on the latter, and not on the closet.

InMyRoom tip: Lightly sand the first layer to improve its adhesion to the new paint.

Find out how to age wood with your own hands in the loft style at home with your own hands and you can use it anywhere in production: for wooden kitchen, Provence furniture, tables, etc. This makes a wonderful color that will enhance the decor of any home! Application in decoration modern wood is, perhaps, a win-win option.

This is an incredibly attractive, breathable, pleasant to the touch natural material. It has a beneficial effect on the formation of the microclimate in the home, has bactericidal properties, and is useful for human energy. Wooden ceiling beams and individual decorative elements will look great in any room.

This wonderful material lends itself perfectly to the most different types processing: It can be left natural, painted, aged, and much more.

There is no specific, unambiguous answer to this question.

This procedure is carried out with different purposes, most often this is:

How to make wood look old: brushing

There are many in various ways for processing wood to achieve the desired result. Brushing, or texturing, is one of the most actively used.

The word brush is of English origin and means brush. From this comes the name of the technique, which consists in using the mentioned object to remove soft, pliable fibers of the material. Very similar processes occur as a result of natural aging, but in this case they take up quite a lot a large number of time. This method is considered the closest to natural changes occurring in the material.

With its help, wood acquires a distinct woody texture.

What kind of wood can be aged: species

Give the surface wooden material An aged look using brushing is quite possible on your own, at home. The problem is that not every type of wood is suitable for such processing.

Maple, cherry, beech, pear, selected varieties exotic plants, do not lend themselves to this method of aging.

It is also not suitable for products and surfaces made of MDF. What to do if it's out of stock suitable material? You will have to use a different method, chemical. Wood coniferous trees It is best processed mechanically.

Brushing is a rather labor-intensive procedure. Main tool for its implementation - an elastic and durable metal brush. Quickly change appearance wood will not be made with its help, so you can speed up the process.

To do this, you will need a grinder or a drill with a special brush made of hard wire.

It should be noted that the use of electromechanical tools for wood processing can be very unsafe. The fact is that during the event quite strong vibrations occur, which can cause not only wood chips, but also metal elements to tear off and suddenly fly off.

Therefore, it is important not only to know how to age wood, but also to be able to do it safely, without risking your own health. All activities are carried out in a special protective suit; eyes must be covered with camouflage goggles or a face shield. The airways are closed with a special respirator.

Chemical treatment during aging process

Is it possible to age wood by hand without using special devices and tools? You will need coarse sandpaper to clean the surface. Ammonia (ammonia solution) is applied to the prepared material, which makes the wood noticeably darker.

Thanks to this treatment, the wood texture becomes more distinct, while the noble darkening gives the material a touch of refined antiquity.

Such processing can be superficial and fairly light in nature.. In this case, a polymer coarse brush is used. If the wood is subjected to deep processing, even tree rings wood

Chemical method

The main thing is not to overdo it when performing this operation. Otherwise, the result of the efforts spent will not be an elegant textured surface, but loose, indefinite wood.

Regardless of the chosen processing method, after rough initial cleaning wooden blank it is necessary to return the original aesthetics. Irregularities and burrs are carefully removed from the surface of the object, then using a special abrasive brush. Then the material is further lightened and given a gloss, for which thin sandpaper is used.

Aged wood effect: patination

Mechanical processing alone is not enough to achieve the desired effect of aged wood. What to do with the material next? You can coat the product with one of the types of varnish. The material looks very interesting after special processing - patination. It allows you to make the surface of the material even more embossed. Patina is a peculiar, unique gloss acquired by a material over time.

Applying patina: the process

Recreating it with your own hands requires considerable effort, and is carried out in several separate stages. What is the patination process?

This is the application of special stains and compounds to the surface being treated. In each case, they are selected individually, in accordance with the desired shade and color of the product.

The compositions should be applied in such a way that they end up in the pores of the wood, which open during mechanical processing.

The essence of this method is to make the deep pores of the material appear contrasting and dark against the general background, which is lighter. For independent conduct This procedure requires choosing a paint that matches the color. They completely paint over the prepared surface, and without waiting completely dry, remove part of the top layer with a cloth or sponge. This wood looks noble and looks like antique.

But patination is not the only way to achieve a similar or similar result. It is absolutely wonderful to age products using special enamels. This method will allow you to get a real work of art that looks little different from a genuine antique.

A layer of enamel of a certain color is applied to the surface. When it dries, it’s time for the next coloring. For secondary application, you will need a composition of a different shade and a more liquid consistency.

When the treated rock has completely dried, its surface can be easily processed with sandpaper. IN selected places appears initial layer, forming elegant abrasions.

Toning and varnishing

The patination process must be completed by tinting. To carry it out, you will need special compositions containing resins and natural ones. As finishing They use a double or triple layer of varnish on treated wood. After drying, the surface is treated with a soft cloth to give it a special shine.

This varnishing consolidates all previously carried out manipulations and gives the product a finished, finished look.

And although the process is quite complex and time-consuming, anyone can master the art of working with wood.

The main thing here is to carefully study the technology, understand the sequence of steps, and strictly follow the instructions.

Secrets of high-quality brushing: how to age wood

How to competently carry out the brushing process so that the resulting result is pleasing to the eye? You need to know some of the nuances of the process.

Aged wood: use in the interior

Wood treated in a special way cannot be found in every home. The fact is that it is not enough to simply age the wood.

The ability to correctly use it for interior decoration is of great importance. But the use of the described brushing method allows us to produce completely unique products, actually exclusive.

These can be individual pieces of furniture, or entire sets and sets.

Chests of drawers, candlesticks, made from such material look especially interesting. bookshelves, antique sideboards, frames for mirrors and paintings, country furniture and kitchen sets. This method of wood processing is excellent for making individual doors and partitions.

The wood brushing method is great for giving a special effect to flooring and parquet board. Often this material is used for designer decoration of the walls of saunas or home baths, billiard rooms, retro cafes, bars and non-standard premises.

The recent fashion for vintage products, cars and retro-style clothing has not spared design wooden products. Antique-looking wood processing also allows new buildings to create an interior that looks as if the owners inherited the apartment from their great-grandfathers. Hosts country houses decorate the facades with old wood and inner space. Decorative false beams on the ceiling, stairs, doors and other design elements are made from artificially aged wood, giving the house a resemblance to a medieval castle or a fairy-tale forest hut.

The high cost of artificially aged wooden objects makes home craftsmen want to make the necessary things with their own hands, achieving both a reduction in the cost of the product and its true uniqueness. Carrying out the work of aging wood is not at all as difficult as it may seem from the outside. You just need to know about the basic ways to achieve beautiful textured surface on ordinary lumber, which can be purchased at any company that sells building materials and wood.

How to prepare for work?

There are 3 methods of aging wood: chemical, thermal, mechanical.

There are 3 widely used:

• chemical, which is only suitable for products made of hardwood trees;
• thermal (firing) – applicable for wood of any species;
• mechanical (brushing) – suitable for coniferous species and oak.

To work with wood, the following tools and materials are required:

• axe;
• drill or grinder with attachments;
• brush with metal bristles;
• hair brush;
• paint brushes;
• stain, acrylic paint, clear varnish, wax;
• sandpaper.

When purchasing boards or timber from which you plan to create an artificially aged item, you can choose specimens that are already damaged by a bug, have chips and potholes on the surface, small cracks and knots. After processing, they will give especially charm to the “antique” item.

Ready-made furniture for aging is selected to be massive, a little rough or in a rustic style, similar to hand-made piece furniture of the last century. Before decorating in any way, it is best to disassemble the piece of furniture into its component parts. This will allow you to treat all surfaces without leaving any hard to reach places untreated areas that will catch the eye.

Before you start decorating an object for the first time, it is worth practicing and getting your hands on various discarded pieces of boards and any wood. The master will act more confidently, with knowledge of many nuances that may arise during work. On these same textbooks It’s convenient to select the tone of paints or stains, and evaluate in advance what the result will be.

Many operations (brushing, painting and drying after it, firing) should be performed outdoors.

The most readily available materials for purchase are made from coniferous wood: pine, spruce, larch. They have a pronounced structure and pattern formed by fibers of different hardness. This makes them suitable for mechanical decoration.

Using tools that destroy the top layers of wood, you can achieve the effect of aging much faster than if it happened naturally. All abrasions, potholes and cracks can be imitated using 2 methods:

1. Using a sharp corner of an ax, make holes of varying depths and widths in a chaotic manner on the surface of a board, beam or log. The corners of the block are slightly bent with an ax, without worrying about accuracy or flat surface. After this, all surfaces treated in this way must be thoroughly sanded with a stiff brush with steel bristles. When sanding a large product, it is better to use a drill or grinder with a special attachment. It is necessary to grind until all the sharp edges that appeared when chopping with an ax acquire the outlines of natural damage smoothed over time. It is important to remember that the movements of the brush should always be directed along the fibers. The next step will be sanding to remove protruding fibers and processing with a steel brush with softer bristles than the first time. This removes some of the soft fibers, creating shallow depressions between the ridges of the harder winter wood fibers. The same brush can additionally highlight knots and cracks.
2. After sanding the light surface of the new product, you need to make it look like old wood that has darkened over time: paint it with stain or dark acrylic paint. After drying, using medium-grain sandpaper, without strong pressure, lightly rub the wood, removing paint from protruding ridges and hills. At the same time, the dark color remains in the potholes and between the fibers. For final finishing The product is coated with acrylic transparent or light yellow varnish and dried until completely dry.

A more “humane” way. Suitable for small products and furniture, wooden dishes and others small surfaces. Brushing is done manually using a brush with metal bristles. In this case, as in the previous case, the soft fibers are removed, leaving ridges of hard wood. Use a hair brush to sweep away wood dust, monitoring the process by eye and achieving the desired degree of surface wear. After this, the product is painted and decorated as indicated above.

Thermal and chemical treatment of wood

These methods can be called related, since the destruction of the top layer of wood occurs almost without mechanical influence. It's more dangerous ways than the previous ones, so processing should be done in the air and in compliance with safety measures.

The essence of firing is that soft fibers are destroyed when exposed to open fire. To do this, the surfaces of the workpiece are fired with a flame. blowtorch or a special gas burner to a depth of 3 mm. With superficial firing, the aging effect will be insignificant, with deeper firing it will be more pronounced. The master regulates the process depending on his taste and needs.

After charring the top layer, they start using wire brush or a drill attachment, scraping off carbon deposits until desired color and textures. Such wood does not need to be painted, because it will already have dark and light areas. Final processing consists of sanding and varnishing the product.

At chemically decorating wood in an antique manner occurs during exposure to alkalis or ammonia. You can use cleaning aerosols for this. kitchen stoves or drainage agent. It is necessary to familiarize yourself with the composition of the product before use; it must contain alkali. Particular attention should be paid to safety precautions when working with it.

Once on the surface of the wood, these chemicals “burn out” some of the soft fibers, while simultaneously coloring the wood grey colour. After treatment, all surfaces are washed with water and coated with a weak solution of table vinegar or citric acid(1 tsp per 200 ml of water), removing any remaining alkali.

When using vinegar Special attention Please note that it should be 9% table vinegar, not acid.

Dried products are brushed and painted, if necessary.

Processing wood using the listed methods will help the owner to decorate the interior of the apartment in an antique style without investing a lot of money and without spending a lot of time on it. The availability of materials and tools for processing allows both an experienced carpenter and a beginner, and even a woman with imagination and skillful hands to engage in this type of creativity.

Do-it-yourself wood brushing is interesting technology, which allows you to artificially age the tree. The natural aging process takes decades. But now, with the help of special tools, this effect can be achieved at home quickly and without significant material expenditure. Aged material is ideal for decoration in classic, vintage and rustic styles.

Do-it-yourself wood brushing: how the process is carried out

Residents of modern cities increasingly prefer styles with a clearly emphasized individuality when decorating their premises: classic, vintage, rustic and country.

The main detail of such interiors is wood. Thanks to this material, the design of the room acquires uniqueness and unique charm. But for a classic and vintage style, pristine wood is not suitable natural form. In this case, aged wood, which has a more attractive and noble appearance, is best suited. This material is suitable for making any decorative element: a vintage lamp, a wooden chest of drawers, stylish doors And window frames, fireplace lining.

Under natural conditions, the process of aging wood drags on for decades, since the original patterns on the surface of the wood are formed slowly and unevenly. Therefore, this material is rare and expensive. But among modern technologies there is a simple and quick way artificial aging of wood. This process is called brushing. Interest in this method is shown not only by lovers of luxury vintage furniture, but also by those who want to diversify interior interior country houses.

Do-it-yourself aging of wood (brushing) is a decorative technology for processing wooden products, during which, for ordinary wooden surface an artificial antiquity effect is created. The method got its name from English word brush - brush. The aging process is also called wood structuring.

The artificial brushing method is based on the difference in hardness of the layers that make up the wood. During the work process, the soft light layer is removed. As a result, the areas become embossed, which gives the material a special appearance, characteristic only of fairly old trees.

Types of safe finishing materials for finishing premises, their specificity and features of use, prices.

Process automation: machines and machines for brushing wood

Mass production of artificially aged wood requires speed. Some stages of wood processing can be mechanized, which will simplify the work of obtaining aged wood. To do this, you will need drills with variable speed control and special brushing machines.

Let's look at the most popular models of specialized equipment for structuring wood.

Festool rustofix ras 180 stripping router or brush machine for brushing wood. Along with this tool, you can buy brushes for brushing wood. They come in three types:

• steel wire brush for primary processing of boards;
• synthetic bristle brush for intermediate sanding;
• sisal or hair brushes for polishing the back surface of the product.

The Makita 974 sander is used for brushing wood. But during work, difficulties may arise with processing areas at the corners of the part. Therefore, at the joints, it is recommended to use a special angle grinder with different attachments or use a nylon brush attached to an angle grinder for brushing. This brush is highly wear-resistant and allows you to process the ends, edges and contours of parts with complex shapes.

The Felisatti AGF 110/1010E grinding machine is suitable for processing both smooth and uneven surfaces. Nylon and metal brushes are included with the tool.

Helpful advice! It only makes sense to buy a wood brushing machine if large volumes of work are planned. Brushes for brushing wood can be purchased either with the machine or purchased separately.

How to age wood with your own hands: technologies

The aging process opens up the widest possibilities for the master to change the structure and color different breeds wood Before proceeding directly to structuring, the wood must be prepared. The material for brushing must be free of defects, nicks and irregularities, and the humidity must be 10-12%, but not more than 15%. If the wood does not meet these characteristics, then the wood fibers will tear during processing, and a beautiful result from structuring will not be obtained.

Let's take a closer look at the process of aging wood at home. Working with the material can be divided into several stages.

Before starting work, it is necessary to perform initial processing of the part, namely: moisten the wood. This will prevent dust from spreading throughout the room during operation.

Next, you will need a hand brush for processing. Depending on the hardness of the wood, we select the hardness of the metal brush for roughing. The bristles of the tool should easily remove soft surface fibers, but should not damage hard ones. It is necessary to move the brush in the direction of the fibers.

If you decide to automate the processing process using a brush for brushing wood on an angle grinder or sanding machine, then it should be remembered that the movements are carried out along the fibers. It is necessary to move the tool with such intensity that the fibers are effectively scraped out.

You need to be careful when choosing the speed: too fast a brush speed can lead to baking of the wood. Using hand tools This problem does not arise, but more effort needs to be made. Also, manual processing will take time.

Helpful advice! It is better to select the speed on a separate small sample of wood. Optimal quantity rpm 1500-2200, but it may differ for different breeds.

Then we carry out the initial grinding of the part. To do this, we use a polymer brush with an abrasive applied to it. This stage will remove roughness and fiber fragments from the surface of the part. Having removed everything unnecessary, you can evaluate how deep and high-quality the structuring of the wood is. If necessary, the grooves can be further deepened, making the structuring more distinct.

On next stage you can think about decorative design details. To do this, use a chisel to make indentations and grooves of arbitrary shape in different places on the part. In appearance, they will resemble cracks that appeared naturally.

Next comes the final polishing. To do this you will need a sisal or hair brush. This wood tool will give the detail a finished look, fully revealing all the decorative texture. At manual processing Instead of a brush, fine-grain sandpaper with an abrasive surface is used. It will allow you to create a perfectly polished surface of the workpiece.

Then the wood needs to be well dried. It must be completely cleaned of dust and thus prepared for further painting and varnishing.

Application will make the product look old by creating contrasting textured patterns. Copious application of the composition with quick removal excess will allow you to paint the soft-fiber parts and leave the hard-fiber areas light. Soft fibers quickly absorb paint, which means they become dyed, while hard fibers do not have time to absorb the pigment during this time, so they remain light. Wood painted with gold or silver paint looks especially beautiful.

Against the background of the natural color of the wood, this pigment creates reflections on the surface of the part in the sun. This gives the product original decorativeness and luxury. The product will look especially presentable if the wood is patinated - painting over the deepest cracks with a darker paint.

At the final stage, the product is polished again to remove roughness and irregularities that appeared after painting.

Helpful advice! Varnishing is carried out on completely dry and cleaned wood. To paint brushed parquet, you must use a special parquet varnish. This will allow the finished coating to maintain its presentable appearance and performance characteristics for a long time.

Brushing wood: features of chemical structuring of wood

Brushing with chemicals is rare, even though the use of chemically active compounds greatly facilitates the process of artificial aging of wood. To carry out chemical treatment of wood, you must have special knowledge and ability to work with chemicals. In addition, the method has a drawback - it is not always possible to easily purchase the necessary reagents.

For the chemical structuring of wood, acids are needed: hydrochloric and sulfuric, alkali and ammonia. Reagents applied to the surface of the material corrode soft fibers. The master can only scrape off the unnecessary wood.

Stages of chemical brushing of wood:

1. Surface grinding and removal of dirt.
2. Apply a thin layer of chemicals to the surface of the part. During chemical structuring, it is necessary to monitor the evaporation of the reagents. If necessary, it is recommended to reapply them.
3. When Chemical substance will act, that is, soften the outer fibers, the part must be washed under running water and remove any remaining reagent with a soft bristle brush.
4. Next, the wood must be thoroughly dried, painted or varnished.

The availability and demand for brushing allows you to perform this method at home. When structuring wood, it is imperative to adhere to safety regulations. You should work with tools and a wood brushing machine carefully and carefully. All artificial structuring processes must be performed in special protective clothing, glasses and gloves. If antiseptic solutions are used during work or too much dust accumulates in the air from the wood, then you should work in a respirator.

Brushing a wooden surface is unusual way make a wooden product more beautiful, unusual and attractive. This method is very popular among interior designers and ordinary people, since anyone can perform artificial aging of wood. It takes a little time and effort to get luxury furniture or a chic original ceiling, stylized in antique style. For a better effect, you can patina the furniture.

Artificial brushing of wood: cost of work

The main task of brushing wood is to create and emphasize the unique texture of the surface of the board. The result is a material with a clearly visible pattern. natural material. The procedure is suitable for many types of material. The cost of standard brushing is 350 rubles. per sq. m. When ordering additional painting, the cost increases. The price of the work depends on the type of wood chosen, as well as on the size of the board.

The cost of each stage of artificial aging is usually calculated separately. You can order sanding separately or just impregnation. Most profitable option – full service brushing from the beginning of work until the final coating with the purchase of material. It is possible to perform artificial structuring from your material.

Workshops that brush wood carry out an individual calculation of the cost of processing depending on the type of wood, the size of the product and the list of services.

Brushing is performed on any type of wooden materials:

• bar;
• lining;

• planks;
• block house;
• planks.

Scope of application of wood structuring technology

The structuring method is very popular in the manufacture of interior items and room elements. Such wooden products will become an original addition to classic and vintage interiors. In addition, the advantage of brushing technology is the ability self-creation exclusive items. In addition, this method falls into the category of simple processes accessible to everyone.

Brushed boards are used to decorate fireplaces, shelves, columns, wall panels, and aged wood is also used as ceiling beams. This material creates a unique ambience for living rooms and halls, cafes and restaurants. The interior design is filled with aristocracy and luxury, and aged wood creates warmth and comfort in the room.

Looks stylish and sophisticated wooden furniture using brushed elements. Artificial aging and patination of wood with your own hands allows you to make absolutely any furniture: cabinets, chests of drawers, pegs, beds. The use of brushed elements in furniture and interior design has no restrictions or prohibitions - it all depends on your imagination and creativity.