DIY climbing slide for children. Children's wooden slide for the dacha - instructions for making it yourself. How to make a ramp from wood

Children have always loved and still love to ride on carousels and swings. Now these children's structures are manufactured on an industrial scale. They can be purchased at many retail outlets. But some of them can be built on our own. In this article we will look at how to make a children's slide.

Construction requirements

The territory of a country house is a great place to install a children's slide. Making one for children is not very difficult if you follow certain rules:

The age of the children does not at all affect the fact that the design should provide for such required elements like fencing and railings. While playing, the child becomes inattentive and may fall from a height, and these elements will help him maintain his balance.
For the construction of the building, you need to use only environmentally friendly materials that will be harmless to children's health. It is prohibited to use structural elements, which are highly flammable.
When building a children's slide for a summer residence, it is preferable wooden materials. Metal structures are generally no worse than wooden ones, but have some disadvantages. We must not forget that for children the most active time of the year is summer with the burning rays of the sun. To prevent children from getting burned on very hot metal, a structure made of this material will have to be placed in a shaded area. The wooden structure can be placed in any convenient location. There are also plastic slides, but their material is not very durable and can crack at any time. In addition, such designs are widely presented in stores, so it makes no sense to make them yourself.

The slide must be designed in such a way that it is primarily safe for children. The children's structure should have no slotted partitions or dangerous gaps, since children, in the heat of play, can insert any part of their body into the existing hole and be seriously injured when descending. All details must be calculated down to the smallest detail, otherwise unforeseen troubles may occur.

Manufacturing process

To build a children's slide, the first thing you need to do is build a slide. It is made from several boards, which must be the same in width and length. The wooden base must be carefully sanded so that children can descend comfortably and safely. The boards are connected to each other with several bars on the bottom side.
After the descent is constructed, it is time to attach the side structural parts to it. As work progresses, it is necessary to determine the height of the structure that children will climb and the angle of inclination of the ramp. Factory-made slides have standard dimensions: 1.3 m – height, 55º – angle of inclination. These parameters must also be adhered to during construction. homemade design. The side boards should be of such length that their ends extend to the top of the platform and serve as a kind of handrail for grasping before descending. The side boards are attached on both sides to the base of the slope using self-tapping screws. The sides, as well as the escapement, must be well sanded, sharp corners cut off and smoothed with sandpaper or an angle grinder grinding wheel. These safety measures will prevent children from getting injured while playing.
After the descent is ready, markings are made for the children's structure. Drill for gardening work Holes are made in the ground into which beams are installed, the ends of which are coated with mastic on the bottom side. It will not allow the tree to rot quickly. After this, the installation site of the beams is filled with concrete.
In the upper part of the beams, using a saw, grooves are cut out with such a depth and width so that strapping strips can be inserted into the racks without any problems. These wooden elements are connected to the beams using self-tapping screws. The strapping strips will perform 2 functions simultaneously. Firstly, they will make the structure of the children's slide more rigid and stable. Secondly, they will play the role of a protective fence. Children will feel safe on the playground.
2 more wooden crossbars are attached to the resulting frame structure. A ladder will be attached to them on one side, and a ready-made descent on the other. Then comes the turn of installing a wooden floor, which is constructed from boards using self-tapping screws. Small gaps are left between the floor boards to allow water to escape during and after rainfall. For greater strength, the joints of wooden structures are fastened with metal corners.

The children's slide has been completed, and children will now be able to enjoy their free time.

If you have children and a summer cottage, then you should definitely build a slide on it. While parents are gardening or cooking barbecue, the kids will have fun on the mini playground. Read about how to plan and make a slide with your own hands, using photo and video instructions in practice.

Height and safety

The slide on the site should first of all be safe for children of different ages. So, for children under 2 years old the height of the slide is only 1.5 meters, for children from 2 to 7 years old the height is about 2.5 m, and for teenagers 3-3.5 meters. The steps on the slide ladder should be wide, and the rungs should be located close to each other. Further, the staircase design must be equipped with handrails of any type: after climbing the slide, the child must hold on to something.

Advice! To ensure that the slide serves more than one generation of children and is safe on the stairs, an anti-slip coating is laid around it. The covering protects children from injuries when climbing during rain, snow or after swimming in the pool.

Another important stage in creating a safe slide is calculating the weight of the children who will ride on it:

The slide is secured to a base or supports that can easily support the weight of 2-3 children.
A level gutter is responsible for safety during descent; it is good to make sides on the sides to prevent the child from falling out.
All bolts, chips, chips or sharp corners on the children's slide are excluded. The wood is sanded so that the child does not drive a splinter.

Advice! Under the gutter along which the child descends, a soft patch is placed - this is lawn grass, a mound of sand or a soft covering.

Choosing a place to place a children's slide

The slide is placed in the place where it opens good review from any point on the site. But make sure that the place for games is not in the very hot sun. In the case of such an arrangement, it is worth thinking about building a canopy.

Advice! The canopy is made of polycarbonate, and a regular beach umbrella is also suitable for a low slide.

Wood slide

A slide made of natural wood is distinguished by its environmental friendliness and ease of installation; it consists of the following elements:

Base.
Staircase with railings.
Descent.
Top platform and protective parts.

Such a slide can be complemented by a whole game complex of labyrinths, parallel bars, a sandbox or mini-rooms with entrances and exits. The construction of a wooden slide involves the selection of high-quality raw materials and their normal processing.

The ramp is made of plywood, pre-coated with varnish to hide sanding errors. The supporting structure is made of timber, and the steps are made of strong boards.

Important! Today, there are a variety of ramps available for sale, made of durable plastic, fiberglass or wood. The minimum price of a stingray is 1.5-2 thousand rubles. The best option is to create a supporting structure for the slide and then install a flat or spiral slope.

A wooden slide is good for everyone, but located in an open space, after 3-5 years it can dry out, be damaged by insects or mold. Wood rots from rain, and the situation can be saved by covering each structural element with a thick layer of varnish. But after winter and hot summer, the slide should be inspected, identifying dry or cracked parts.

Metal slide

Previously, metal slides stood in every yard, distinguished by their strength and durability. Such designs are more reliable, because they are not afraid of the hot sun, rain, or frost.

The construction of such a slide is carried out in several stages:

The most primitive foundation is poured; you can immediately pour 4 support pipes, as is done when installing fences.
Next, the stairs and railings are welded onto 2 pipes on one side, the remaining 2 pipes are used to attach the gutter.
A platform is welded onto all pipes.

Important! Gutter is 2 metal pipes, to which a curved sheet of metal is welded. After assembling the slide, all welded seams must be ground; a grinder is used for this purpose.

After completing the assembly of the structure, the slide can be painted with plain paint or painted. The metal gets very hot under the sun, so on hot days it is worth covering the slide with a beach umbrella to prevent children from burning their skin.

A simple slide can be made using a descent from a house, which is also built with your own hands, using timber or leftover building materials:

Concrete piles are mounted in 4 old car tires and on which beams of the required height are installed vertically. The beams are secured with construction corners.
A frame for the house is installed along the perimeter of the posts, with holes for entry through the stairs and exit through the slide.
After this, a light but durable ladder, a chute for descent, the floor and walls of the future house are installed. The elements are attached using self-tapping screws, and the entire wooden structure must be coated with an antiseptic.
Holes are drilled at the joints of the beams, tightening the structure with 120 mm bolts.
Next, stack rafter elements from timber for the roof. The final roof covering is made of corrugated sheets. Decorative tiles made from ordinary colored foam are often used.

The last stage is to cover the entire structure with a layer of varnish.

How much does a finished slide cost?

To avoid the hassle of making it, you can simply purchase a slide:

Inflatable slide for the little ones. Such a slide perfect solution for small children, because it can be equipped with a shallow pool, mini trampoline or educational elements. The cost of an inflatable slide starts from 4 thousand rubles, usually it has a height of more than 1.4 m. The advantages of the slide are its mobility, resistance to temperature changes, and after the child grows up, the inflatable center can be sold at a profit.

Play complexes are made of plastic, in some cases combined with wood. This type of city is more expensive, and the minimum cost starts at 4.5 thousand rubles for the most primitive model. But plastic slides can combine a swing, parallel bars that develop the muscle corset, a basketball basket and much more. Thanks to the fastening system, the height of the gutter can be adjusted to suit the age and height of the child.

Creating a children's slide is a creative process, and a full-fledged play area requires a swing, a sandbox and even a football goal. But to build these elements children's corner much cheaper on your own, because buying finished product requires 60% more material resources.

DIY children's slide: video

Slide for children at the dacha: photo

The slide will be the most fun entertainment for children if you install it in your garden. While you are working in the garden, children will have fun riding on the slide. And if you have a sufficient number of tools and materials, as well as golden hands, then you can make a children’s slide from wood or metal yourself, and it will cost much less than an expensive structure from a store.

Types of children's slides

Children's slide is optimal design for children from 3 to 7 years old, which can be installed in your garden. Let's see what slides can be installed on the territory of a country house. Today there are the following types of children's slides: inflatable, plastic, metal, wooden.

Inflatable slides

These slides are made of durable polyvinyl chloride and are suitable for the smallest children. They are easily inflated using an electric pump or hand pump and are installed in any convenient place in the garden, but only on a flat surface. Since even the most durable film can be pierced by any sharp object, it is best to place the attraction on an asphalt, concrete or stone area so that branches, stones, and nails cannot damage PVC film. After summer is over, you can simply deflate the inflatable slide, put it in a special case and hide it in the pantry until next year.

The inflatable slide can be easily installed in any convenient place in the garden

Plastic slides

Such factory designs are intended for riding by children aged 3 to 5 years. Made of durable plastic, the slide descent can be made in any geometric shape so that the child would be interested in riding it. The plastic slide does not take up much space, is easy to clean, has an excellent sliding smooth surface and is absolutely safe for children over 3 years old. Since the slope has a high degree of heat capacity, you can ride on such a slide even in the cold season. There will be plastic warm in winter and cool in summer, so children will be comfortable enough to go down the slope.

A plastic slide is best suited for children aged 3 to 5 years.

Metal slides

These are reliable and durable structures that will last for decades with proper and proper care. metal parts slides. It is possible to make a slide of any height, and therefore the slide is suitable for children over 10 years old. A significant disadvantage of a metal slide is the high thermal conductivity of the material, so it will be very cold to ride on it in winter and hot in summer. A metal slide must be painted regularly in order to protect it from premature corrosion.

With proper care, a metal slide will last for decades

Wooden slides

A wooden slide is the most convenient and environmentally friendly for installation in the courtyard of a country house or in the country.

Photo gallery: options for children's slides

Children's slides made of wood are considered the most environmentally friendly An inflatable children's slide for the winter can be deflated and stored in the pantry A metal slide can get very hot in summer, and in winter it can cool to sub-zero temperatures. Children will love the highly curved finished plastic pipe A low wooden slide with a metal slide is perfect for kids. It is better to install a wooden slide next to the sandbox, trampoline and horizontal bars to create a full-fledged playground

Preparing to work on creating a wooden slide

Before making a wooden slide with your own hands, you need to draw up an accurate design, drawing and make calculations of the entire structure. Today, thanks to the Internet, you can easily calculate its dimensions, make a project in 3D format and see how the slide will look when finished.

slide project

For a small child, it is best to build a low, gentle slide so that he can climb up and down it independently. Older children will enjoy a slide with twists and turns. When creating a slide project, you should consider the following features:

it is necessary to calculate the number of steps and the optimal distance between them, as well as the steepness of the march, all this depends on the height of the children. The taller the child, the greater the distance between the steps should be. You also need to decide on the height of the handrails and their installation location;
a slide for children should have a gentle staircase, and children over 7 years old can have vertical steps;
the dimensions of the slide depend on the expected width and height of the slope, as well as the enclosing sides;
the installation site of the structure must be level, and before the descent, sufficient space should be left for safe skiing;
The angle of descent and steepness of the stairs should be absolutely safe for your child.

When building a slide, you must take into account the wishes of the children and rely on your own abilities.

Slide drawing

First, they draw up a plan diagram of the slide. You can draw your own drawing or find finished layout in the Internet. Ready-made drawings of wooden slides are convenient because they indicate the exact proportions of the structural elements and the dimensions of the parts.

Calculation of the amount of material

To build a slide structure with a descent length of 3 meters and a platform size of 50x50 cm you will need:

4 wooden beams measuring 10x10x150 cm for the installation of supports;
2 wooden beams measuring 2x4x50 cm to enhance the strength of the platform;
2 wooden beams measuring 3x3x50 cm for mounting the site fencing;
2 wooden beams measuring 3x3x150 cm for installing railings;
4 boards measuring 2x10x50cm for the lower connection of the supports (structural strength device);
5 boards measuring 2.5x10x50 cm for flooring on the site;
no more than 8 boards measuring 2.5x10x30 cm for mounting steps;
2 or more floorboards 3 meters long or water-repellent plywood more than 2 cm thick for installing the drain. If desired, you can use a plastic slope, which is produced in a factory. It can be purchased from specialized companies or made to order;
2 boards measuring 2.5x10x300 cm for installing ramp fencing;
screws and anchors for fastening structural elements. The fasteners must be galvanized so that they do not rust in the future. It is better not to take nails when building a slide;
2 boards or beams of appropriate length for the construction of a climbing stringer or string for steps. Under the upper platform of the frame, if desired, you can make a large, spacious box for storing various children's toys and sports equipment.

List of tools

To build a children's slide from wooden elements you will need the following set of tools:

construction tape;
good hammer;
plumb line or level;
drill;
electric saw or gasoline saw;
Sander;
carpenter's plane.

Stages of construction of a wooden children's slide

Before you start choosing material for building a children's slide, you should select a place on the site to install the attraction. It is recommended to level the place where it is decided to install the slide. It is better to place the slide away from trees and various buildings. The surface around the structure can be covered with a rubber coating or seeded lawn grass.

Step-by-step instructions for creating a wooden slide

For the construction of the slide structure, it is necessary to use only completely dried wooden boards, since this will significantly reduce the incidence of various deformations in future. All boards must be thoroughly processed with a plane to remove knots and nicks, and also sanded with a special sanding machine. It is also necessary to chamfer, that is, round all sharp corners of the boards.
Boards and wooden beams are considered the most environmentally friendly material for creating children's attractions
Bottom part support pillars must be treated with good antiseptic agents: fire retardant, waterproofing mastic, resin or waste machine oil, as they will avoid premature rotting of the tree and its damage.
At the installation site of the slide, you should mark the points for installing the racks of the structure. These are four square sectors measuring 50x50 cm. Then you need to dig holes 50–60 cm deep and fill them with a sand-crushed stone mixture about 20 cm deep. This will additional protection for support posts.
Wooden posts are installed in the prepared wells and filled with concrete. To make the supports strong, they are “tied” at the bottom. To do this, grooves 2 cm in size are cut out in the support posts using a milling cutter or a regular chisel. Then, insert the board for the lower connection of the supports into the cut grooves and connect the supports to each other. Fastening is carried out with self-tapping screws or self-tapping screws. If you plan not to dig the supports into the ground, then you will have to install strong guy wires on the supports.
To install the surface of the upper platform of the slide, take 2 wooden beams measuring 2x4x50 cm to enhance the strength of the platform and 5 boards measuring 2.5x10x50 cm for the floor. The beams are laid out parallel to each other, and then prepared pine floorboards are attached to them. Gaps of a few millimeters are left between the boards for drainage.
To install the top platform of a wooden slide, polished boards that are free of knots and nicks are required.
A slide for a slide can be made of wood and made of plastic, and then it just needs to be fixed to the constructed structure. To make a wooden ramp, take floorboards 3 meters long or water-repellent plywood and fasten them together along the slope, and then install sides for the fence from two boards measuring 2.5x10x300 cm. You can attach the ramp to the floor surface of the upper platform by forming an angle of 45°, and then screwing the boards to the base. The second option is to saw the grooves. The lower part of the slope, like the upper part, is sawed at a certain angle. This will ensure greater stability of the entire structure.
When creating a children's slide with your own hands, the easiest way is to use a plastic slide
The boards from which the slope is made must be well sanded before assembling them and after installing the slope. The slide must be perfectly smooth and even, without knots or snags, so that the child does not get a splinter or abrasion while riding the slide.
The wooden slide for the slide should be as level and smooth as possible so that the child does not get hurt during the descent
A slide for a slide can be made from a plastic sheet, as it has excellent sliding qualities. But plastic can crack due to temperature changes and large physical activity, therefore not entirely suitable for areas with harsh climatic conditions.
Galvanized steel sheet thickness more than 0.5 mm will be great solution for creating a smooth slope for a wooden slide. You can also use thin plywood, linoleum, as well as a special wax polish applied to the wood. All these materials can be laid on top of a wooden ramp, they will make the descent easy and fast.
For older children, you can make a complex spiral ramp, but then you will have to approach its design in more detail, and additional coverage will be mandatory in this case. Remember that any unevenness of the slope, sharp edges and corners of metal sheets, as well as other traumatic elements can cause serious injuries to children.
Therefore, all places where the screws are attached must be thoroughly sanded, and the slope itself must be varnished or painted.
To make a staircase, you need to make a bowstring or stringer - this depends on the developed drawing. There should be a lot of steps so that it is convenient for the child to go up to the platform or go down if necessary.

Fences (railings) depend on the design of the slide, its height, and the size of the upper platform. It is best to make high railings so that the child does not accidentally lean over them and fall. Also, the fence on the slope should be high so that the child does not fly out while skiing.

Finishing a wooden slide

Even if it seems that making a children's slide is very simple, you should take into account some nuances.

For the rotary descent device, you can take high-quality flexible plywood.

Each element and detail of the staircase must be well and securely fastened. It is recommended to paint wooden elements and parts of the slide not with oil, but with acrylic waterproof paint, but best of all - with water-repellent varnish, which is used to cover yacht decks. This coating must be applied in several layers with the obligatory drying of each subsequent layer.

In order for the child to land softly during the descent, there should be a mat or a good sand mound below.

The wooden slide painted with acrylic paint looks bright and attracts children's attention.

Since the slope is constantly exposed to friction during skating, it will have to be painted periodically. Before this, you will need to re-sand the surface, eliminate all existing defects and fill the resulting cracks with high-quality putty.

It is best to install the slide in the yard in a shady place so that it can be seen from the window of the house. This will be the best way to keep an eye on children as they ride. There should not be any near the slide thorny bushes , allergenic and berries, such as datura and foxglove, so that children do not accidentally get poisoned by their berries. Honey plants should not grow nearby, as they will attract bees and wasps, which could accidentally sting a rolling child.

You should leave plenty of free space near the slide so that many children can be there at the same time.

Video: how to build a wooden children's slide yourself

Metal slide for children: preparation

Metal structures for country houses are no less popular than wooden ones and therefore a metal slide will look great on any personal plot. Children will be able to have fun and not distract their parents from activities in the garden. If you can work with welding, then building such a slide will not be difficult.

A metal slide will look great on any garden plot; this design is durable and reliable.

Advantages of a metal slide:

high degree of strength and reliability;
durability;
high level of wear resistance;
sustainability.

Design disadvantages:

reaction to temperature changes (very hot in summer and cool in winter);
rapid corrosion of metal without appropriate treatment and care;
the difficulty of making an attraction without proper experience working with metal and welding.

Required materials

The length of all elements will depend on the size and dimensions of the future slide. In this case, it is necessary to take into account the fact that the supports must be concreted into the ground. To create a metal slide you will need:

square pipes measuring 3x50x50 mm or round pipes with a diameter of about 50 mm for support posts;
square pipes measuring 2x50x50 mm to create the upper platform, descent, railings and flights of stairs;
galvanized metal sheet more than 3 mm thick to create a slide slope;
wooden boards for steps if necessary;
metal corners with a 5x5 cm strip;
anti-corrosion agents and primer;
special water-repellent paint for metal;
cement, sand and crushed stone.

Tools for installing the slide

To create a children's slide made of metal, you will need the following set of tools:

Bulgarian;
electric or gas welding;
drill;
building level;
Sander.

Stages of manufacturing a metal children's slide

The first step will be to develop a drawing that will greatly simplify the calculation required material and places of fastening of all elements and parts of the slide structure.

To make a metal slide, you will need a more careful design drawing compared to a wooden attraction.

Step-by-step instructions for making a metal slide

To create the top platform of the slide, you need to make a frame from a thick pipe with a square cross-section, and then cover it with a sheet of metal and weld it. To make the platform strong, it is necessary to weld the iron corners at the bottom in a criss-cross manner. To avoid strong slipping, you need to use ribbed metal or choose another anti-slip rough coating (rubber is possible).
To construct the frame, support pipes (racks) must be welded to the upper platform. It is necessary to weld square metal “heels” to the lower edges, which will give greater stability to the entire structure. Without them, the supports can sag significantly under the irresistible force of gravity, and the entire frame of the slide can simply tilt.
It is better to strengthen the support posts of the slide with transverse pipes so that the structure does not deform over time
Installation of an iron frame begins with drilling holes in the ground. The pits must be at least 60 cm deep. We pour sand-crushed stone pillow, on which the supports with “heels” will be installed. You should pour water over them and let them sit for about 24 hours. Then the supports are installed strictly vertically in level and filled with concrete.
The construction of the staircase occurs as follows. On one side of the structure, two inclined square squares must be welded to the upper platform of the frame. iron pipes, which will serve as the main staircase. Then the steps will be welded to them. You can make a frame of marches from the corners, and the steps themselves can be made from sanded and dried wooden boards or rectangular metal elements. Wooden steps are safe, especially in the cold season, while metal is more slippery and traumatic. But if you provide the steps with an anti-slip rubber coating, then you can also use metal sheets.
Slide railings (fences) for kids are best made from metal mesh, and for older children it will be enough metal railings with wooden handrails. The distance between all the parts (pipes) of the fences should be such that the child cannot get stuck between them if he suddenly wants to crawl through them.
When determining the curvature of the gutter for the slope, it is necessary to keep in mind that the angle of inclination should be steep at the very top and flatter at the bottom. This way you will provide your child with a natural way of braking, which means a smooth, safe landing.
You can make a release of any shape from a metal sheet (helical, straight, twisted). For this you need two frames square pipes bend into the desired configuration using a pipe bender or hot welding. Then the upper ends are welded to the site parallel to each other, and the lower ends are buried in the ground. After this, stiffening ribs are welded to them, which are transverse crossbars. A rectangular sheet of metal intended for the descent device is laid on this structure and welded along the edges to parallel frame pipes. The sheet is overlapped so that the child can ride comfortably. For a ramp, it is best to take a galvanized, stainless or aluminum sheet.
It must be remembered that the metal elements of the slide will become very hot in the summer, and the child may get burned while riding. And in winter, the metal will freeze very much, which is also inconvenient for children, especially since at low temperatures the baby’s wet hands can “stick” to the metal. Therefore, it is best to cover the descent with linoleum, and all metal elements that the child will touch can be covered with rubber pads.
Parallel to the base of the slope, at approximately a height of 5–10 cm, special elements made of reinforcement or thin pipe are installed, which will act as sides enclosing the slope. They will make riding safe for kids. In order to prevent the child’s hands or feet from getting into the gap between the side and the ramp while skating, it is necessary to sew it up with the remains of a metal sheet.
Since the metal slope is quite light and can bend under its own weight, as well as under a child, it is best to weld additional strong stands under the chute for the descent and bury their lower part in the ground.

Final finishing of a metal children's slide

After completing all welding work electrical required grinder Carefully process all seams, edges and corners of the structure in order to ensure complete safety for children while riding.

All metal elements should be treated with anti-corrosion primer and painted with metal paint. It is not recommended to paint the slope itself, as this will slow down the sliding process; the slope is already made of stainless material.

Where possible, all metal elements should be covered with rubber pads, which can protect children from burns in summer and freezing hands in winter. Cover the slide area with a special coating that has anti-slip properties.

Pipes for making the frame must have thick walls (at least 3 mm or more) so that they do not bend during operation. This is especially true for the pipes from which the support posts will be made. The quality of the metal profile and sheet for the ramp is a very important factor when building a children's slide.

The location for mounting the attraction must be chosen to be level and preferably on a hill where there is no groundwater, since they can wash away the structure over time and it will become askew.

To install a slide, it is best to choose an area where you can later install other children’s attributes: a sandbox, swings, carousels, horizontal bars. This will make an excellent children's sports and entertainment area.

Video: making a children's slide from metal

Thus, it is easy to make a children’s wooden or metal slide with your own hands if you follow all the technological processes and accurately follow the drawn up drawing and dimensions. Children will appreciate your efforts and will be happy to ride on such a slide both in summer and winter, having fun in your country house.

Children's slide for the dacha: the product we will talk about in this article on the website. Drawings photo and video instructions will help you build DIY children's slide. A children's slide is probably one of the mandatory elements of any summer cottage if you have children. Any number of structures can be installed on the playground various types: sandbox - the choice depends on your desires and financial capabilities. Most items for the playground can be made independently. For example, children's slide It is constructed quite simply, and has served as a source of children's joy for many years.

The main requirement for children's slide at the dacha is safety

Mandatory conditions for a children's slide in the country

Children's slide at the dacha can be installed both indoors and outdoors outdoors. It is worth understanding that a slide for a child (whether it was built for the house or for the street in this case does not matter) must meet certain requirements:

For construction, you need to use only environmentally friendly materials that are safe for the health of the child. It doesn’t matter whether you are building a slide from wood, metal or plastic, the material should not contain harmful elements. The same applies to paint and varnish materials that you will use to open the structure. Another important point both for children's plastic slide for home and for wooden structure– it is fire resistant;

The most popular materials for slide construction– wood and metal

be sure to use structural elements such as railings and fences. They will not only help the child maintain balance while climbing the slide, but will also protect him from falling during games. Railings on a slide for a child in the country should be installed regardless of the age of your child;
It is best to use wood to build the structure. Children's wooden slides for the home are more pleasant to use due to the natural origin of the material. In outdoor conditions, wooden slides do not heat up as quickly as metal ones, so they can be installed in any place convenient for you, and not just in the shaded part of the site. A child can easily get burned on hot metal, but wood does not heat up to a dangerous temperature;

Metal slide with a wavy slope covered with acrylic paint

plastic children's slide easier for the street than wood or metal. It can be easily moved from place to place and transported if necessary, but the material itself is less durable and can easily crack;
slide should be located away from trees, lamps, outbuildings and other structures. This is done so that the baby does not get hurt when going down the slide. The surface around the slide can be sown with lawn grass or use a special rubber cover. Remember that the main thing is the child’s health, so any street children's slide for the garden must be safe;

Slide should be installed in an open area to help minimize possible injury

the base should be strengthened with metal support or concreted. You should not rely on the fact that the child will not move the structure from its place - even the most durable slide can tip over as a result of children's games;
an important point is the height of the structure being constructed do-it-yourself children's slide for the dacha. It must be appropriate for the child’s age, for example, the height of a slide intended for younger children school age, should not exceed 3.5 m.

Wooden slide with two slopes, a house and a swing, built in the courtyard of a private house

Helpful advice! The design of the slide must have no gaps or openings, otherwise the child may get stuck or be seriously injured during the game.

DIY slide construction: materials and tools

How build a slide at your dacha with your own hands without much difficulty? If we're talking about about a wooden structure, you will need several wooden beams, planed boards, slats, lining and fiberboard. The elements can be connected to each other using nails, anchor bolts and screws.

Process construction of a children's slide made of wood

The list of tools needed for construction is very simple:

wood saw, manual or electric;
hammer;
hand or electric drill;
plane;
tape measure and level;
drill.

A slope for a slide can be purchased from a factory or you can make it yourself

By the way, it is not necessary to use a wooden ramp - cracks may appear on it or chips may break off, which can injure the child. You can buy plastic slides and install them on a wooden structure.

In the case of a metal structure, everything is a little more complicated. You'll need it here welding machine and Bulgarian. All seams and joints in wooden and metal structures should be carefully sanded so that the child does not accidentally get hurt during play. Metal ramps for children's slide should be painted with a special paint that will absorb sunlight and prevent the metal from heating to high temperatures.

Drawing of a wooden slide device for babies

How to build a children's slide at the dacha with your own hands

If you decide build a slide for a child on your own, you should follow a certain sequence of actions:

first of all you need to prepare construction plan. You can take a ready-made one from the Internet or draw your own. Ready drawings of a children's slide made from wood with your own hands are good because they indicate the exact proportions of the elements and the sizes of individual parts;
Referring to the diagram, it is necessary to cut the boards, slats and beams. In addition, they must be sanded so that splinters cannot get under the child’s skin. Using a plane, the beveled edges of the corners of the parts are removed, which will further increase the safety of the structure;

Wooden structures are environmentally friendly and quite easy to install

markings are carried out in the designated area. It is worth allocating a site with a reserve if you are going to build a children's slide along with it. sports complex for the dacha. Optimal size for a structure without additional extensions - 2 by 2 m;
Under the supports, recesses of approximately 60 cm are dug. Wooden beams are inserted into them, the ends of which should be covered with a special waterproofing mastic. This is done in order to extend the service life of the supports. Grooves are cut into the racks into which connecting wooden boards are inserted. The elements of the resulting frame are connected to each other using bolts or self-tapping screws;

Drawing of a wooden slide for a children's playground in the garden

then the floor is installed. At building a slide at the dacha with your own hands remember: it is important that the floor is as strong as possible, so thick boards are selected for it, which are connected to each other with self-tapping screws and screwed to the frame using metal corners. If you do not want water to accumulate on the floor of the slide, you should leave small gaps between the boards, but not enough for the child to stick his finger into them;

Railings and fences are mandatory structural elements children's slide

A ramp for children's slides is being manufactured. Its width should not exceed 80 cm. The surface of the slope is covered with linoleum, galvanized sheet or plastic. Linoleum is the cheapest option, but is easily warped and torn. The metal coating heats up noticeably in the sun and can also bend. Most reliable option– plastic slides for children's slides. Plastic does not overheat, does not rust or bend, but is more expensive than linoleum or metal coating;

Drawing of a slide structure for a children's sports complex

a ladder is being installed. The optimal size of boards for its manufacture is 20 mm. After installing the main part, the side part is installed. To do this, a board sawn at an angle of 45° is attached to the racks with screws. Then the bars are screwed to the board, onto which the steps are mounted. Photos of do-it-yourself wooden children's slides on the Internet clearly show how exactly the elements of the stairs need to be attached. After installing the steps, balusters are installed on which the railings are attached;

Photo: the sandbox can be arranged both at the base of the slide and at the end of the descent

Helpful advice! Railings must be made in any case, regardless of the height of the slide or the angle of inclination of the stairs. They serve not only for safety, but also to make it easier for the child to maintain balance when lifting.

Grooves are cut out in the side of the racks into which side walls made of plywood or fiberboard are installed. The walls can also be made of small boards or have some original look;
All protruding corners, heads of nails and screws are removed, all surfaces are carefully sanded and coated with paint or a special protective varnish.

Drawing of a children's slide for a summer residence. dimensions: length - 3020 mm; width - 890 mm; height - 1800 mm. Maximum user weight - 100 kg, minimum child age - 3 years

An interesting modification of the design could be a slide - a sandbox for children. In this case, the sandbox is organized either at the base of the slide, or you can build a reservoir with sand at the end of the descent.

Materials for building a children's slide

If you are in doubt about what material to use to build a house with a slide for children or another similar structure on a personal plot, you should familiarize yourself in detail with the features of buildings made from the two most popular materials - wood and metal.

Wooden children's sports complex for a summer residence with a slide

Features of a wooden slide

Wooden structures for playgrounds have proven themselves several centuries ago. All children's slides made of wood with their own hands are built according to a classic layout, which includes a ladder and a ramp, a base, an upper platform and a protective part. In addition, often standard project add additional elements, such as an internal labyrinth, a sandbox, additional descents and much more. Since such a design can be made quite simply, everything here depends solely on your imagination.

Photo: installation of a plastic descent – best option when constructing a slide intended for small children

One of the significant advantages of creating a wooden slide for children in the country with your own hands is the low cost of production. The material itself is relatively inexpensive, and specialized tools are also not needed to process it. In addition, building a structure from boards and timber does not require any special construction skills and abilities from you - sometimes it is enough just to strictly adhere to the diagram found on the Internet.

Another advantage of this design is its environmental safety. Wood does not cause allergies and does not emit harmful substances when heated. The only controversial point here is paintwork structures, so be sure to read the instructions when purchasing varnish or paint to cover the slide.

Photo: simple design children's slide made from tree trunks

Helpful advice! The wood for the slide must be High Quality, dry and well sanded. Choose the strongest types of wood, and to increase resistance to humidity or temperature changes, the boards must be coated with a special compound.

An element that should be given special attention when installing a wooden structure is the descent. It is best not to take risks using planed boards yourself, but to purchase factory-made material for the ramp. It can be linoleum, a sheet of stainless metal or plastic.

Photo: children's playhouse wooden with plastic slide

Features of a children's metal slide

Metal slides for children used to be in every yard and, with proper care, could last for decades. Photos of children's slides with their own hands made of metal show that in appearance they are not much different from their wooden counterpart.

A significant advantage of a metal structure is its strength. The iron structure does not require special treatment or maintenance, withstands temperature changes, high humidity, large mechanical loads. The only thing that needs to be done periodically with a metal slide is to renew the paint and make sure that the paint coating does not peel off as a result of corrosion.

Strength and durability are the main advantages of metal structures

How make a slide for children with your own hands made of metal? To do this you will need ready-made elements, a grinder and a welding machine. Particular attention should be paid to the seams, as they are potentially dangerous for the child. The quality of welding is also of fundamental importance: the higher it is, the stronger the structure will be.

Flaw iron slide – quick warming up in the sun. If you install such a structure where the sun's rays constantly fall on it, your child can easily get burned. Therefore, if you decide to build a building from metal elements, you should select a place for it in the shade or make a special one.

Photo: a metal slide with a plastic slope installed by the pool

At building a slide with your own hands It is not necessary to use only wooden or metal elements. These materials can be combined to different proportions, thus obtaining an original, reliable design.

Of course, one can always wonder where buy a children's slide for the dacha. This can be done in any specialized store or online. But remember that only a design made by yourself will satisfy all your requirements and allow you to realize your design fantasies.

Even a factory-made slide can be supplemented with independently created elements

There are a number of points that are worth considering to ensure that the design is reliable and safe:

for additional stability of the balusters, the staircase of a wooden structure should be additionally strengthened with the help of planks;
drawings, videos, photos of children's slides at the dacha with their own hands show that the grooves and slats inserted into them, when bolted together, form a light, but strong and stable structure;

At construction of a children's slide in the country the height of the structure should be carefully calculated

an excellent option for painting a structure - acrylic paint. It is safe for the child’s health and protects the tree well from various kinds negative impacts and looks attractive. Acrylic is also famous for its durability and does not lose color saturation even with prolonged exposure to direct sunlight;
convenient type of covering for use under a slide – artificial grass or rubber. This does not require special care, does not change its properties depending on the time of year or weather, creates a safe surface under the slide that will protect the child from injury in the event of a fall from the slide.

The surface around the slide for children should be as traumatic as possible

Plastic slide for children purchased in a store or at construction market, is not always the best option. Yes, you save time and effort by building, but wooden or metal structure may not only cost less money, but will also allow you to create a full-fledged sports complex for your child, consisting of a large number of elements. By the way, even a plastic slide for children can be supplemented with homemade elements and turned into a complex and exciting structure for games.

A high-quality and reliable slide is not only a good way to keep your child occupied while staying in a country house, but also an opportunity to develop him physically.

Do children's activities seem unsafe to you? Are you afraid that your child might get injured while looking for adventure? The best way out of the situation is not to ban, but to provide a safe place for games! Moreover, making a children's slide with your own hands is not so difficult. To do this you will need a minimum of material, construction tools and a little imagination. You will find practical advice on construction, design drawings and recommendations regarding the choice of building materials below.

What you need to know to build a children's slide

The proverb about the need to measure several times before cutting is especially relevant when building a play complex for a child. After all, mistakes in this matter are unforgivable!

Playground slide with swings

Five golden rules for a play slide

A children's slide must first of all be safe and comfortable:

The descent must necessarily have a “brake pad” - a section where the ramp is parallel to the surface of the pad. Otherwise, the speed of descent will not decrease, which may lead to injury to the child.
The length of a self-made children's slide should be exactly twice the height of the structure. So, if the length of the ramp is 5 m, the height of the launch pad cannot be more than 2.5 m.
There should be no buildings or fences within a radius of 1 m near the descent area. This is necessary so that the child cannot hit himself if he accelerates too much.
It is necessary to provide a special covering in the descent area (sand, rubber mats, etc.). There shouldn't be a swamp there in rainy weather!
If a sandbox or hammock will be placed under the structure, you need to sew up the “ceiling” in advance and make a roof over the launch pad (to drain water). Otherwise, sand from children's feet will fall onto the heads of those located below.

How to choose material for a slope

The choice of materials for covering the descent is not that great. And, taking into account the requirements that ensure the safety of the child, it is completely narrowed down to several options. But, before listing the features of these materials, let’s look at what you cannot use to make a children’s slide with your own hands:

Polycarbonate (especially cellular). This material, firstly, does not glide well, and secondly, when broken, it forms dangerous chips. In addition, in summer, polycarbonate expands, creating waves. Therefore, the slide will quickly become unusable in hot weather.
PVC panels. A very fragile material that cannot withstand harsh winters.
Glass mats. Strictly not recommended for contact with the skin of a child.

Winter slide from monolithic polycarbonate

How to achieve a “mirror” wood surface

Building a wooden children's slide with your own hands is a reality! But only if you are ready to devote several days to making a slippery wooden ramp. After all, in order to apply several layers of yacht varnish and sand the surface in between applications, it will take a lot of time.

Why is a wooden slide attractive?

Pros of a wooden slide:

The child will be surrounded by environmentally friendly, natural materials.
The surface will not heat up as much in the heat as, for example, metal.
In winter, a wooden slope can be filled with water and turned into an ice slide.

Disadvantages of a slope made of wood:

If there is sand on the site, the varnished surface will very quickly become unusable. Children will bring sand on their clothes and scratch the slope with it, like sandpaper. So be prepared to renew your coverage annually!
The slightest oversight while sanding the surface can result in splinters and scratches for the baby after skating.
Sliding speed wooden surface in any case, it will be low, which will quickly make a wooden slide uninteresting for growing children.
IN summer time it will be impossible to convert the slide into a water park, that is, to supply water to the slope.

A selection of drawings of a wooden children's slide for making with your own hands:

A simple drawing of a wooden slide

Low descent for small children

Play complex with slide

Simple model

Advice! Instead of wood, it is better to use Finnish plywood to cover the slope of the slide. It is much more moisture resistant and perfectly withstands the effects of precipitation.

Secrets of slippery surfaces

A few secrets on how to make a wooden children's slide truly slippery:

A wooden slope (dry and sanded) can be coated with a special oil that protects the surface (for example, Pinotex). This must be done in several layers. Thanks to this procedure, the wood will not lose its smoothness, and moisture will roll off well without destroying the surface.
Sanding the wood layer by layer after each application of varnish will help achieve the effect of a mirror surface and make the slide really slippery.
A plywood slope can be coated with liquid acrylic, used for repairing bathtubs. In addition to excellent glide, this option is also good because you can choose almost any color of the coating! But it should be remembered that scratches will form on it quite quickly, into which dirt will invariably accumulate. This will not affect the functionality of the slide, but appearance the design will be damaged.

Sanded wood escapement

Advice! The joint of plywood sheets looks much more aesthetically pleasing if their edges are sawed off with a jigsaw at an angle of 45º. In this option, the sheets are arranged as if overlapping, and one element “crawls” onto the other.

Metal coating – we care about the safety of the baby

A ramp made of stainless steel or galvanized sheets is a “classic of the genre” when building a children’s slide with your own hands. But this solution also has its drawbacks.

Firstly, in order to cover the entire slide, you need to either overlap it or spend money on a much more expensive sheet of metal of a larger size (sheets 2.5 and 6 m long are available for sale). There is a third option - take the time to find a construction company that will agree to “cut off” the required piece of stainless steel from the existing roll.
Secondly, stainless steel (like other metals) gets very hot in the sun. Therefore, it is recommended to place the ramp on the north side in order to reduce the intensity of illumination of the structure. But such a layout is not always possible on the site!
Thirdly, thin steel is very sharp and completely unsafe for a child. A carelessly bent corner can cause serious injury to your baby! Therefore, you need to bend the sheet extremely carefully, firmly fixing it to the base board.

Metal slide with handrails

Advice! Instead of a galvanized sheet to cover the slide, you can take alucobond (an aluminum panel) and attach it to liquid nails. The advantage of this solution is the wide color palette of the material!

Secrets of a good metal slide:

The shield under the stainless steel sheet must be perfectly flat, without protrusions or differences. After all, stainless steel is extremely thin and does not compensate for surface imperfections. To do this, it is better to pre-cover the construction boards with fiberboard boards.
It is not recommended to buy a mirror stainless steel, since it heats up much faster and more strongly on sunny days. A much better option is polished stainless steel.
The sheet should be much wider and longer than the slide itself. After all, for the safety of the child, this covering around the entire perimeter needs to be folded and hidden under some kind of plinths or boards.

Advice! You only need to fasten the sheet of metal along the edges (to the sides and bottom). It is strictly forbidden to make fastenings on the surface of the slide slope!

Flooring slide - cheap and cheerful

Another interesting and inexpensive option– covering the slide with a sheet of linoleum. The advantages of this solution are obvious:

the material is relatively cheap (you can buy scraps, which are sold at half the price);
Ideally not needed for linoleum Smooth surface due to its thickness and softness;
the base under this material does not rot, it protects the wood from moisture and temperature changes (if linoleum is on the sides, in the summer you can make a water slide);
linoleum softens impacts and does not form dangerous sharp corners, chips or splinters, like other coating options.

A linoleum slide is suitable for home

But such a slide also has quite a few disadvantages:

the coating must be changed annually due to its rapid wear;
in very hot weather, linoleum can melt, which is dangerous in terms of getting burns;
the sliding speed on this material is very low;
the design with linoleum does not look very aesthetically pleasing.

For optimal gliding, felt or felt mats can be provided for skating.

Building a wooden slide for a child - step-by-step instructions

Every child's dream is a multifunctional playground, with which you can realize any ideas for games. So, step-by-step instruction for building a children's slide with your own hands.

Proper preparation is the key to successful construction

Preparatory stage:

Take off fertile soil at the construction site and level the soil. Fill the area with sand and let it settle and compact (it is advisable to complete this stage in the fall, and begin building the slide in the spring).
Prepare wooden blanks (stringers, railings, boards for steps and “tunnels”, beams for the base): if necessary, dry everything, saw it to the selected size and carefully sand it, and then soak it with a protective mixture.
Paint the steps, handrails and boards for the “tunnel” with multi-colored enamel in 2 layers with intermediate sanding.
From 12-gauge plywood, cut out the side elements (for lining the tunnel) and the sides of the slide. Treat the elements with impregnation.

Installation technique for the base structure

Frame installation:

Build a foundation. To do this, you need to make holes with a garden drill, install the reinforcement in them at a level and fill everything with concrete.
Weld the corners to the fittings. Make cuts in the pillars for the base of the slide and mount the timber on the corners, securing everything with self-tapping screws. Connect the pillars to each other with jibs.
Make a staircase: fasten the stringers (it is advisable to add boards on the back side for additional structural rigidity), put steps on them.
Install a launch pad with a ladder leading to it.
Next, make a base for the descent from timber and install a curved metal profile (25x40) for the slope.

Bearing structures

The final stage - we finish construction

Do-it-yourself slope and lining of a slide for a playground:

Lay a plywood board on the base for the ramp and make a galvanized iron deck. Bend parts of the sheet along the perimeter and attach them to the metal profile from below. Cut a gap in the boards forming the platform and also wrap the iron flooring there.
Make a tunnel from boards under the slope. Sew up the side parts with plywood.
Install bumpers on the slide and railings on the stairs.
Mount hipped roof and cover it with pre-treated plywood.
Sew up the side parts of the structure with sheets of plywood and cut holes in them for the climbing slide.

Organization of the slope and lining of the slide

Creative slides – making a child’s dreams come true

Children's imagination is strong and sometimes incomprehensible. In a child's imagination, even the simplest hut can easily turn into a beautiful castle! Therefore, a simple descent with a ladder will be enough for kids to have fun. However, there are many options for how to make a children’s slide with your own hands in an extraordinary and creative way - examples in the photo.

Downhill Tree House

Under the protection of the stone lion

Advice! In order to maintain interest in the slide for a long time, it is advisable to provide additional entertainment elements at the launch site.

A playground is the dream of every child aged 3 to 13 years. And in order for the play area to meet the changing needs of children, all the details need to be thought through at the planning stage. You may need to invite a specialist to do this, who will save you from the need to make a children's slide with your own hands. And then a real play complex will appear on your site - safe and comfortable.