To the greenhouse in Novgorod region 600 plastic PET bottles were used. In the village of Proletary they came up with their own method of recycling. Greenhouses are made here from ordinary bottles. Albert Andreevich Abrosimov spent more than 600 on the greenhouse plastic bottles. He “spotted” the original “technology” from his neighbors. Albert Andreevich improved the technology. Although the base is still the same plastic container. It was collected by the whole family. It takes several hours to assemble one frame. There are more than 20 such frames here.

A combination of dark and light bottles makes the greenhouse more elegant. But the main thing is not beauty. The main thing is durability. There is hope that it will last not five or even ten years, but much longer. This means that Albert Andreevich and Valentina Petrovna will not have to spend money on plastic film every year and stretch it onto the frame every spring. Neighbors and even visitors look with curiosity towards the unusual structure. They ask about technology. So, perhaps, the experience of the proletarians will soon spread throughout the entire region. Not only gardeners will benefit from this, but all of us - it will become much cleaner around us. How to make material for a greenhouse, here is MK..

The bottles must first be prepared, namely, cut off the neck and bottom, making a longitudinal slit, to obtain a rectangle that must either be rolled into reverse side and fix (leaving it like that for about a day) or straighten it using a press.
Try to keep all the fragments the same size, then it will be easier for you to fasten them together.
Previously, a soldering iron or sewing machine(which failed much faster due to the heavy load) But now there is a more successful way of fastening, this is a Furniture Gun with copper staples, with the help of which the process of making such a greenhouse is accelerated significantly.

After making such sheets, you can insert them into a subframe; this greenhouse will last from 10 to 15 years. How do you like this saving? Now you know how to make a greenhouse from plastic bottles with your own hands.

Here are some more greenhouses made from bottles...

Everything seems simple, but that’s why people still have questions. Every man knows how to make a frame for a greenhouse. The whole problem is how to sew 1 elastic strips into a single fabric. This is how I do it.
I wash the bottles, cut off the neck and bottom. There are two vertical stripes on the flat part of the bottle. I cut one of them and align the top and bottom - it turns out to be a rectangle. I sort the blanks by size and roll them up. I use bottles with a capacity of 1 liter, 1.5 liter and 2 liter, but not “tightened”. It's better, of course, when they are the same size. There is no need to correct the workpieces: they will straighten themselves during the work process.
I start work by making a strip for the length of the workpiece, which depends on the height of the greenhouse frame. If the length (from the ground through the roof to the bottom of the other side of the greenhouse) is more than 7 m, then it is better to make not one panel, but two. I do it with a margin - 20 cm on both sides. After this, I calculate how many rectangles need to be taken, taking into account that each rectangle will have 1.2-1.3 cm for sewing the panel together. I don’t throw away necks with hangers from bottles (1.5 l). Using scissors, I cut a strip 2-3 mm wide for sewing rectangles. Then I prepare the tools: an awl, several knitting needles or syringe needles, old tweezers.
I combine 2 rectangles with their narrow sides so that one lies 1.2-1.3 cm on top of the other, and make a puncture with an awl at a distance of 1-1.5 cm from the edge. Taking out the awl, I insert a knitting needle into the puncture. I do the same on the other side. When one pair of rectangles is fixed in this way, I make the next one, etc. I warm up the tweezers on gas stove and make 2 or 3 pairs of holes on a couple of rectangles in the place where they overlap. I pull a thin strip through the holes, tying knots at the beginning and end of the work. Connecting the rectangles into pairs, and the pairs together, I gradually sew the entire strip together. Then I figure out how many strips are needed for the entire width of the panel for the greenhouse. Although, based on personal experience, it’s not worth making the panel wider than 150 cm (it’s inconvenient to work with).
When several strips are sewn, I place a stool near the stove, and on it a box of kitchen table(for spoons and forks), and on top - a grill from the refrigerator. This is a very convenient and simple device for stitching strips.
I try to sew the rectangles in one direction so that they fit closer to each other. I place one strip on the grill, straightening the right edge (the left one hangs to the floor). I place the second one next to it with a spade, level it and fix it in several places with hot tweezers (you can tie it for reliability). I make a couple of holes, constantly moving and aligning the panel. When the holes are made to the end of the strips, I return the work to its original position and begin stitching thin stripes. Sewing strip by strip, I select the desired width of the panel. That's all the wisdom.
A greenhouse made from bottles constructed in this way at minimal cost turns out to be very durable, capable of withstanding the loads of fallen snow, so it can be used even in winter. In addition, it quickly warms up inside, while the heat accumulated during the day is well retained inside, which allows you to do without additional sources heat. However, with warming, this advantage turns into a disadvantage, since the danger of overheating of plants increases. Therefore, when planning, it is necessary to provide a window. Or better yet, several to improve air exchange and ventilation conditions.
Another way:


http://teplicy-samara.com/poleznoe/teplitsa-iz-plastikovykh-butylok/

Gardeners consider home vegetable growing not only an exciting activity suburban area, but also a great way to top up your budget. In order to grow vegetables, berries and other crops, they use open ground and greenhouse structures. Moreover, the last option is considered the most common. For example, a greenhouse made from plastic bottles can be made independently, which will significantly save financial costs. initial stage business.

Advantages of this design

A greenhouse made from plastic bottles has a number of advantages. Firstly, it is cheap to build. Secondly, in order to do it, you do not need to have knowledge in this area. You can simply consult with experienced gardeners on this issue.

Other design characteristics

Some people mistakenly believe that a greenhouse made from a plastic bottle does not have a long lifespan. This is wrong. The design's service life is several years longer than that of standard greenhouses, which are constructed from polyethylene film.

Greenhouse made from plastic bottles:

• used for 3-5 years;
• economical to construct;
• can be easily mounted and dismantled;
• does not require a solid foundation;
• keeps heat inside perfectly;
• has good ability to transmit light.

It is worth noting that the sun's rays will not adversely affect the plants inside the greenhouse, since they are retained by the dense structure of the plastic.

When can you use a bottle greenhouse?

There are several options for using this design. It can be used not only in summer time, but also in spring and autumn. It produces quite successfully heating system and additional lighting is provided if daylight hours have already begun to decline.

A greenhouse made from a plastic bottle will have the same strength as one made from polyethylene.

What does the structure of this greenhouse consist of?

Firstly, it is initially worth considering that any greenhouse structure cannot be properly installed without a specific foundation. If a greenhouse is made from plastic bottles, then you must first make a frame. It can be constructed from a variety of materials. Today there are a huge number of them for this purpose. Next, the entire structure is covered with a roof.

It is imperative that if you are making a greenhouse of plastic bottles with your own hands, you must make windows in the design.

Functions of vents in a greenhouse made from plastic bottles

Since air masses do not circulate in a plastic structure without a certain influence, the plants do not receive sufficient quantity oxygen. This makes them grow poorly.

The windows can be of any size.

Locations for vents in the greenhouse:

• on the roof;
• on the wall above (under the roof).

Can also be used as a window Entrance door to the greenhouse. But opening it for a long time, especially in winter, is not recommended. This may harm the plants being grown. .

The principles of placing vents are based on the fact that air, which is well heated, rises up and accumulates there. To take it outside, you need to make openings that will open in two ways:

• manual;
• automatic.

The manual method is clear to everyone. Automatic opening of the vents for ventilation is carried out by special equipment that is installed in the greenhouse. It is also worth installing its oxygen saturation. The frequency of ventilation of the greenhouse depends on these indicators.

What bottles can be used to build a greenhouse?

Always generates quite a large number of disputes such a design as a greenhouse for plastic bottles. How to make it and what is the best material from? There are two options here:

• use standard whole plastic bottles;
• cut them and level them.

A greenhouse is made quite simply from plastic bottles. Advice for summer residents is that you only need to use 1.5-2 liter bottles. With a large volume, plastic containers will be difficult to cut and level.

How to straighten plastic bottles

So, if you need to initially align the bottles, then you need to cut them correctly. This is done like this:

• the neck and bottom of the bottle are cut off;
• the middle is cut vertically on one side.

You need to cut off the bottom and neck of the bottle along the clear lines of the joints of the material. They are visible on the surface.

As a result, you should get rectangles from the middle of the bottle. They are rolled into rolls of 20-40 pieces and will gradually begin to straighten out. You can put them under a press. We do not use the bottom and neck.

Stages of manufacturing a greenhouse structure from plastic bottles

Questions often arise about how to properly make a greenhouse from plastic bottles. The discussion can last for hours. It is worth initially understanding that it is necessary to make a design project. Based on its parameters, appropriate calculations on the amount of material are already carried out.

After the project, they move on to making the base. Then - to the frame of the structure. And on last stage build a roof.

Greenhouse base

The greenhouse design made from plastic bottles is distinguished by its lightness. It is for this reason that the basis may be:

• brick;
• foam block;
• wooden;
• monolithic and so on.

The latest version of the foundation for a greenhouse is used to build a structure for many years or in case of its subsequent replacement with a more durable one. practical option greenhouse or greenhouse.

The base is installed on the ground. You can dig in a little brick, foam blocks or wooden boards. All elements of such a structure must be fastened together.

Brick to brick connected concrete mortar. The same applies to foam blocks. Wooden boards can be nailed together with long-legged nails or screwed together with special bolts.

Frame making

Any greenhouse made of plastic bottles is based on a frame. A master class on this issue can show that the frame is made of several types of material:

• wood;
• plastic pipes.

It is considered the most practical and reliable wooden frame. Professionals advise covering it with a layer of paint immediately after construction. This will make it possible to protect the structure of the material from moisture penetration and thereby preserve it for a long time.

Plastic pipes are also durable. Only if wood can be easily found, then they will have to be purchased. And this extra costs. Some gardeners are incapable of such actions. Fastened plastic frame using special plastic welding.

Making a greenhouse roof

A greenhouse roof made of plastic bottles can be:

• single-slope;
• gable.

These are the two most common options. It is also based on a kind of frame.

You need to choose a material for constructing a greenhouse roof frame based on technical specifications the material from which the main frame is made. That is, if it is made of plastic, then the roof frame should also be made of plastic. It's the same with wood. This will make it easier to fasten all the structural elements together.

As roofing material You can use plastic bottles or plastic film. Professionals recommend giving preference to the latter option, since the film is easy to install and dismantle if necessary.

The film is attached to the plastic frame using plastic clips. On wood - with special bolts with large heads.

Construction of greenhouse walls

Cut plastic bottles are held together quite simply. Metal tongs are used for this. They are heated with gas. Rectangles from bottles are pre-folded overlapping. They are carried along the junction. The plastic melts and sticks together.

The resulting sheets are fastened simply. You can often see the installation of a plastic sheet using wooden board and nails. Each gardener chooses a more convenient method for himself.

How to build a greenhouse from whole plastic bottles

This method is simpler than the previous one. It uses only whole plastic bottles of the same volume. They stack one on top of the other. All of them must be filled with air. The first rows of bottles are filled with sand. This will give stability to the structure.

Fasten all structural elements special glue for plastic. You don’t have to make a frame for such a greenhouse, but you will still need a foundation. The roof is covered with plastic film. Although the bottles are so durable that you can also use cellular polycarbonate small thickness. This design will not be affected by winds and other weather and climatic phenomena.

The cost of a finished greenhouse and its construction from expensive materials is beyond the means of most summer residents. Therefore, many dare to experiment and take available materials as a basis. Those who decided to bring to life the idea of ​​​​how to make a greenhouse from bottles did not go wrong. This design has many advantages and requires a minimum of cheap materials. With hardworking helpers, it can be built in a few days.

What is attractive about a bottle greenhouse?

Plastic and glass bottles are usually thrown into landfills. Those who have summer cottages should not rush to say goodbye to this garbage. After all, from transparent containers, even without experience in construction, you can make a durable and reliable greenhouse that is resistant to ominous weather conditions, moisture, and pests.

You can build a greenhouse from plastic bottles in a few days

A greenhouse made from ordinary plastic bottles has the following advantages:

• the structure will not be destroyed by wind, snow, and is not afraid of external damage;
• plastic is a durable material, the building will last for many years, and if individual elements are damaged, parts can be replaced without complete dismantling;
• heated by the sun, can retain heat inside for a long time due to the fact that inside each bottle there will be warm air;
• you will have to allocate a little money to purchase materials, and if you wish, you can collect empty containers by walking around your neighbors;
• the assembly principle is simple, similar to a children's construction set;
• for construction you do not need to make a strong foundation.

Another interesting and a budget option construction good greenhouse– make walls using ordinary glass bottles and cover the roof polycarbonate sheets. For such a greenhouse you will have to make a reliable, powerful foundation, glass containers you will need a lot (about 150 pieces per square meter).

It will be warmer in a greenhouse made of glass bottles

The design will turn out to be massive and heavy, but beautiful and original if you arrange colorful bottles with ornaments. In such a structure you also don’t have to think through additional system heating in autumn and winter. Thanks to the ability of bottles to retain heat inside themselves, a positive temperature in the room is guaranteed.

Second life of used containers

Economical greenhouse made from waste

detailed instructions building a greenhouse from bottles

Those who think that it is enough to understand the principle of folding bottles and connecting elements together in order to begin construction work are mistaken. At first glance, there are no difficulties in how to make a greenhouse from plastic bottles. In fact, the construction of even a basic greenhouse from this material has its own subtleties and secrets, and also requires phased implementation certain works.

Drawing up a drawing and preparing the site

Any construction always begins with planning, site preparation and drawing up a visual drawing. At this stage, it is necessary to clearly determine where exactly the greenhouse will be installed on the site. It is better to place a structure with walls made of plastic containers in a well-lit place on the south or southwest side. Although such a greenhouse is stable, it is recommended to build it in places where there is no draft and there is no strong gusty wind.

Digging the wooden base for the greenhouse into the ground

When you have decided on the location, you need to draw up a drawing. It is easier to build a rectangular structure. Having drawn the project, indicate the length (at least 1.5 m), width (1.5 - 2 m) and height (from 2 m), and also think about how often the load-bearing ones will be installed, where the doors will be attached, and what the roof will be like. Having a clear picture with dimensions, you can proceed to next stage construction.

Preparatory work and collection of materials

It is necessary to clear the soil and prepare the site. If a place is used on a site where an old building stood, it should be removed upper layer soil, cultivate the land. Before starting construction, collect necessary materials. Purchase timber (it is used for the frame) and mounting rail. You will also need:

• hacksaw or scissors;
• awl;
• nails with a hammer;
• nylon thread;
• level and roulette.

Assemble for walls required quantity empty plastic bottles of the same shape and volume (1.5-2 liters are better), which must be removed from the stickers and washed and dried. It should be taken into account that white transparent containers ideally transmit the light of the sun, it is better to make walls from them, dark ones are suitable for making corner elements or ornaments for beauty.

How to build a frame for a greenhouse from plastic containers

It is easier to build a house-shaped greenhouse with rectangular walls

It is not difficult to build a frame with helpers, if all dimensions were observed during planning and preparation of the timber. The parts are connected with an overlap or in a “paw”, fastened with self-tapping screws. Assemble the frame as follows:

A massive foundation is not needed; it is enough to dig thick beams (cinder blocks) treated with antiseptic agents into the ground around the perimeter. For additional strength, this base is filled with cement.

Attach load-bearing beams to a rectangular wooden base and tie the top and bottom. It is recommended to place vertical beams at a distance of at least 1 meter.

Around frame beams stretch several rows (at a distance of 30-40 cm from each other) of nylon thread so that a bottle post can be inserted between it.

Build a roof frame and reinforce it with timber for stability.

Once the frame is ready, you can move on to the actual important stage construction - erection of greenhouse walls from plastic bottles.

Instructions for building walls

Clean plastic containers must be prepared before assembly. Using a sharp knife, cut off the bottom along the bottom band (it is found on all plastic bottles) so that the two parts can be hermetically connected, inserted into each other, and remove the caps. String the prepared plastic cylinders to form a long pipe corresponding required height. It is important to press the bottles well.

Place the rows of bottles tightly so that there are no gaps

For strength, it is recommended to additionally wrap the constituent parts of the wall with tape. The outer bottles are attached with self-tapping screws or nails to the frame posts. The use of staples is not recommended. The erected wall is additionally strengthened horizontally in several places (at a distance of 30 - 40 cm) with slats.

You can carry out the assembly on the frame itself or separately on the site, stringing the container onto a metal, wooden strip or durable plastic rod. The assembled rows of plastic are often installed vertically on the frame, but it is allowed to lay them out horizontal line. Doors are made in the same way.

Construction reliable roof

The roof is made from ready-made, pre-assembled columns. It is better to string plastic parts onto a rail or a thick rod. The assembly has its own subtleties. It is important that it turns out strong and durable. After all, in winter period There will be snow on the surface, the weight of which must be supported by the roof.

Triangular roof from bottles will withstand heavy snow in winter

The work is carried out according to the following scheme.

Make rows 30-40 cm long from bottle blanks, stringing them onto slats.

To lighten the weight of the greenhouse, as a sheathing (it needs to be done more often if using wooden slats) you can use metal construction mesh.

Nail the posts with plastic cylinders with nails or self-tapping screws to the wooden roof parts.

Wrap the finished element with tape to increase strength.

Install on the greenhouse. To prevent moisture in the room, it is recommended to cover the roof with polyethylene, securing it with staples or nails to the frame beams.

An alternative option for building a greenhouse from plastic containers

Summer residents have come up with another option on how to make a greenhouse from plastic bottles - videos, comments and advice from craftsmen will help those who decide to repeat their creation in their garden. The main advantage of such a building is that plants grown in greenhouse conditions receive enough light, do not freeze, and are not afraid of drafts.

For construction you will need plates cut from used containers.

To implement this alternative option A greenhouse will take much more time and basic material than a greenhouse made from solid bottles. To build a small and low greenhouse you will need about 5 thousand blanks. According to craftsmen, such a greenhouse is much better. The room will be warmer, brighter and more reliable.

The plates need to be overlapped

It is built as follows:

Cut off the neck and bottom from a plastic 2-liter bottle, cut the cylinder to make a rectangular blank. To prevent it from curling into a ring, you need to iron the plastic with a warm iron or put the plate under a press.

Use an awl to make holes in each rectangle around the perimeter. It is necessary to fasten with a strong thread, fishing line or wire (you can sew sewing machine) parts, laying them out overlapping. In the end it will work out large canvas made of plastic, the size of which is equal to the width and height of the greenhouse wall.

Apply the edge of the plastic sheet to the top of the frame and, securing it with a lath, nail it. After stretching, secure the remaining edges to form a wall. All sides of the greenhouse are done in the same way.

Secure the walls crosswise with slats in several places for strength.

Roof sheets are made and attached according to the same principle.

Video: How to make a greenhouse from plastic bottles by stitching

Reliable and original greenhouse made of glass bottles

A durable, warm, budget-friendly and incredibly beautiful greenhouse can be built from ordinary glass bottles. This type of construction will last for many years. It will not be possible to implement your plan in a few weeks - construction will progress slowly, but the end result is worth the hassle and time spent.

It's very warm in a glass bottle greenhouse

Preparing for construction work

Before you build a greenhouse from bottles, you will have to collect a lot of glass containers. Various cans or bottles will do, but the main thing is that they all have the same shape and preferably match in length. Be sure to remove the labels, wash the surface of any remaining glue, and dry it. During construction, close the necks with a stopper to prevent dirt from getting inside.

At the initial stage, you should immediately decide on the size and shape of the roof. If the roof is planned to be sloping rather than a house, one greenhouse wall is erected higher than the others.

Stages and nuances of construction

There are no difficulties in construction, but it is important to complete all stages in a certain sequence.

The design will be heavy, so without monolithic foundation not enough. After installing the formwork, pour concrete and level the surface.

Once the foundation has hardened, the frame can be erected. It is made of brick, wood or metal pipes. All support pillars should be erected at a distance of 1 meter from each other.

Indicate which side the door will be on, mark, if provided, window openings, location of air vents.

Place the bottles with the open neck inward in a checkerboard pattern on a cement-lime mortar, the consistency of which is similar to sour cream. It is important to wait a little after laying out the row until the mass takes hold and hardens a little.

As you lay out the rows, clean them at the same time. glass surface from cement. Otherwise, when it hardens, it will be difficult to clean the bottoms to perfection; their transparency determines whether the greenhouse will be light and warm.

When the walls are laid, wait until the cement hardens and only then work on the door, windows, and roof. It is best to cover a bottle greenhouse with polycarbonate sheets.

For construction you will need little money and a lot of bottles

By applying the advice in practice and adopting the experience of craftsmen and summer residents, you can become the owner of a good and durable, warm and bright greenhouse by investing very little money. Plastic and glass bottles- an excellent material for construction. In a greenhouse built from them, plants will feel comfortable and will delight you with lush growth and a pleasant rich harvest. You can grow from bottles in greenhouses various cultures: greens, onions, cucumbers, tomatoes, peppers and other vegetables.

Modern life forces people to be more economical, and therefore more inventive. Buying ready-made greenhouses is not always profitable; not everyone knows how to work with different building materials, but everyone can find plastic bottles at hand. Making a greenhouse from this raw material is quite simple if you follow the advice of experts.

Advantages and disadvantages of plastic bottles as a material for a greenhouse

This material, when used specifically for a greenhouse, has a huge number of advantages. First of all, it is necessary to note the operational characteristics of the greenhouse. Air gap, which is formed between the walls of a plastic bottle, perfectly retains heat in the room, thanks to which you can significantly reduce the cost of heating a greenhouse in winter.

Another important factor that definitely benefits a structure made from plastic bottles is low cost. Some building components can be obtained for free. The only thing you still have to spend money on is materials for the frame. Ideal for this wooden beam cross section 50*50 mm. In addition, you will need intermediate slats, which can always be replaced with burnt wire.

Plastic containers are an ideal material for making a greenhouse

There are other advantages of a plastic bottle as a building material for a greenhouse:

• duration of operation: if all construction technologies were followed, and the greenhouse was properly cared for, it will last a very, very long time;
• mechanical stability: the material can only be damaged intentionally; precipitation will in no case cause deformation of the greenhouse walls;
• ease of repair: any segment of the greenhouse can be replaced without harm to the entire structure;
• resistance to temperature changes: such a greenhouse does not need to be disassembled for the winter; it can easily withstand any frost.

The only drawback of this material is that it will take a long time to collect the bottles, so it is better to take care of this in advance.

A greenhouse made from plastic bottles is very reliable and cheap

Photo gallery: examples of greenhouses made from plastic bottles

For the frame you can use wooden base
Clear bottles let in more sunlight than colored bottles Whole or cut bottles can be used as building material The design of a structure made from plastic bottles depends only on your imagination.

Preparatory work

A greenhouse made from plastic bottles does not require a project as such. It is enough to make a schematic drawing on which to indicate the dimensions of the future building (dimensions of walls, floors), the frequency of installation of load-bearing structures, as well as the shape and dimensions of the roof. Other little things may be needed, for example, the number of bottles.

There are no special rules for choosing the size of a greenhouse. Everything is done at the discretion of the owner himself. However, there are certain values ​​that will allow the greenhouse not to wobble. The distance between the vertical carriers should be about 1–1.2 m. At the same time, do not forget about the vertical slats (you can just pull a thread).

The size of each wall must be indicated on the drawing.

The process of selecting bottles is no less important than designing and choosing a site for construction. Experts agree on one thing - bottles must be the same size and shape. A container with a volume of 1.5 liters is considered ideal for building a greenhouse. It doesn’t matter what color it is or whether it has transparent walls. Performance characteristics All containers are exactly the same. Remember that bottles must be free from defects, including holes, cuts and burns.

To build a greenhouse, it is best to choose containers from expensive beer, lemonade or mineral water. These bottles have quite thick plastic.

Plastic bottles are particularly durable and come in a variety of colors.

Calculation required quantity material

To make a greenhouse from plastic containers with your own hands, you will need:

• plastic bottles - 600 pieces (for the southern side of the greenhouse it is better to take transparent containers, for the northern side - dark or green);
• wooden boards 3 m long and 10*7 cm in cross section - 2 pieces;
• boards 4 m long and 10*7 cm in cross section - 2 pieces;
• beam 2 m long - 1 piece;
• mounting rail (or burnt wire).

Tools

To work with materials for frames and walls, the following tools are required:

Making a greenhouse from plastic bottles: step-by-step instruction

There are several ways to use plastic bottles to build a greenhouse, but the arrangement of the foundation and installation of the frame are absolutely identical.

Preparing the area

This stage consists of clearing the top layer of soil from debris and plants. There should be no foreign objects on the territory. After this, the area must be properly marked. You can find out exactly how from the completed project.

If necessary, the area must be leveled or covered with sand if the greenhouse is not on open ground.

Seedlings in a greenhouse made from plastic bottles can be planted both in open ground and in special boxes with soil

Foundation arrangement

Despite the fact that such a structure does not weigh much, a foundation is still necessary. Bricks can serve as the base, building blocks(for a greenhouse you can use a cinder block - it is the cheapest), a piece of timber. The material must be placed on flat surface area around the perimeter. This must be done in such a way that the elements of the future frame are installed in the center of the foundation.

The foundation must be in contact with the ground, and the contact area must be maximum. To do this, you can pour sand under the base.

Frame installation

For the frame, it is best to use a beam with a cross section of 50*50 cm. All work on assembling the frame occurs in several stages:

The work is considered completed only if no vibrations are detected during operation.

Making walls

Now you can move on to the most interesting and creative process of creating a greenhouse from plastic bottles - filling the walls. There are several ways to use wall containers.

Using whole bottles:

The greenhouse roof can also be filled with bottles or covered with polycarbonate

A greenhouse made of plastic plates will also be durable. To make it you need to follow a certain plan:

Regardless of which method of making a greenhouse you choose, you need to carefully ensure that there is no gap between the layers of plastic.

It is better to cover doors with polyethylene

Greenhouse doors and windows are best done in the usual way, that is, using plastic film.

Greenhouse sealing

This measure will help prevent cold air from entering the room. To do this, adjacent columns of bottles can additionally be sealed with tape or a special sealant. Similar work it is necessary to do this on the roof as well. However, in this case, the work can be simplified by using ordinary plastic film, which must be fixed with wooden planks.

Video: how to make a greenhouse with your own hands

A greenhouse made from plastic bottles will become a worthy alternative expensive purchased models, since it can be produced quite quickly and with minimal costs. And with high-quality assembly, such a structure will last a long time, regardless of climatic conditions.

Plastic bottles are considered trash, but not among summer residents who know how to find a practical use for everything. And, if earlier we used bottles to create small greenhouses for germinating seedlings, today we decided to use them.

Many will say that this is real nonsense, but we are ready to argue with this now, since we are convinced from our own experience that it is possible to realize the idea. What’s most interesting is that there are even several methods for installing the structure.

Why do you need a bottle greenhouse?

Indeed, why is it necessary if there are prefabricated structures made of profiles and glass, greenhouses made of polycarbonate, pipes, film or, in general, old doors? Why reinvent the wheel if everything was invented a long time ago? But there is always an answer.

A plastic bottle greenhouse is real savings funds, because for its construction you only need to order timber according to size, buy nails and collect bottles. For an average building, 400-600 containers may be enough, and believe me, this is not so much, because according to statistics, the average family throws away up to 30 of these plastic containers per month.

This design is very strong and, oddly enough, durable. It has been experimentally established that plastic bottles wear out almost 30 times longer than ordinary bottles.

In addition to all that has been said, the bottle greenhouse retains heat perfectly due to the thermos effect (the cavity inside the bottles). Experienced summer residents claim that for early spring sowing it is not even necessary to warm up the structure, of course, depending on the region.

There are a lot of similar arguments - the light weight of the greenhouse, simple assembly and replacement of broken walls, incredible strength of the material, durability, cost, excellent appearance and others, but is there any point in discussing anything else when it is necessary to take and build...

DIY bottle greenhouse

Do you think it's difficult? You are mistaken, because simply by learning the technology and the correct algorithm, even a schoolchild will be able to build this structure in a few days. If you get ready small company Like-minded people, at least 2-3 people, can complete the project within a day.

Tools and materials for work

To work with the installation and assembly of the frame, as well as the installation of walls made of bottles, we will need an awl, cutter, hacksaw, hammer, nails, nylon thread, tape measure, level, pencil and paper.

To implement the project, you will need plastic bottles (the quantity depends on the size of the greenhouse), a wooden beam and a mounting rail.

Greenhouse dimensions and design

There is no need to spend much time on the project here; it is advisable to only indicate on the drawing the height, width and length of the greenhouse, the frequency of installation of carriers, the shape of the roof and other little things. This is exactly why you need to know exact dimensions, which can be transferred to paper.

Selecting a site and preparing the area

You and I know very well where the greenhouse should be located - on the south, south-east or south-west side of the buildings in order to provide normal lighting and high-quality protection from cold winds. If the greenhouse is installed in an open area, then you will only have to think about the location of the beds inside, but this already depends on the type of crops to be grown.

Preparing the area for placing the structure is very simple - cleaning the soil surface from various growths and debris. In addition, you will need to properly mark the territory.

Bottle greenhouse frame installation

We do not need a foundation for the greenhouse, since our structure is very light. The only thing that is required is to raise the base slightly above the ground surface to protect it from moisture. For example, you can install the structure on cinder blocks, logs or thick beams.

If there is a ready-made foundation from old greenhouse, you can use it, but here it is important not to forget about replacing the soil and disinfection old building from past plant diseases and infections.

Now we build the frame. To do this, we need to lay a rectangular base of thick bars, say 10x7 cm. Next, we need to install vertical load-bearing beams from the same timber, in increments of 1-1.2 m, assemble a frame under the roof, tie everything in the middle with timber, for example, at a height of 1.5 m from the ground. This is necessary to strengthen the structure and give it stability.

To assemble the greenhouse, we use a hacksaw to cut wood, a hammer and nails, or a screwdriver and self-tapping screws for the assembly itself.

When the frame is ready, you can move on to the most important thing - building walls from bottles.

DIY bottle greenhouse (video)

Building the walls of a bottle greenhouse

To assemble the structure correctly, you only need to follow a few basic rules:

• You should immediately cut the bottom of the bottles with a cutter so that you can put them on top of one another, but the cut should be made at the bottom of the bottle, where there is a transition from the bottom to the wide part, so that the fastening is more complex and high-quality;
• Now you should install the first row of bottles on the warp. They should have a bottom, but with a cut off top, so that through the emptiness of the bottle, it can be nailed or screwed with a self-tapping screw to a wooden frame;
• Next, we assemble the columns from the containers, stringing them on top of each other with a cut of the lower part. Try not to skimp and assemble the columns tightly by pressing;

You can build the structure in a slightly different way, starting not from the bottom row, but from the side, and installing ready-made columns assembled from bottles into the walls.

Roof of the building

The roof can also be built from bottles, in exactly the same way as the walls, only you will need to work with ready-made columns. It will be necessary to install more frequent sheathing to construction material did not fall inside the greenhouse due to its own, albeit not great, weight.

For tightness, the roof is tied with tape or can be covered on top with polyethylene oilcloth. It will take a little, just to prevent moisture from penetrating inside and to ensure that water and snow drain from the roof.

We build a greenhouse from plastic bottle plates

Let's change the technology a little, but only in relation to plastic material. Now we will build not from whole containers, but from plates made on their basis.

• To do this, you will need to cut off the top and bottom of the bottle, and cut the resulting so-called pipe. As a result, we get a fairly durable plastic rectangle.
• We sew all the resulting rectangles together with thin wire or a special cord thread, after making holes with an awl. The main requirement is that the stitching is not end-to-end, but overlapped, so that one plate overlaps the other.
• Fastening finished material, that is, canvas made of bottle plastic, is applied to the frame very simply - on one side, the canvas is pressed against the frame with a lath and seated on nails or screws. Next, it will need to be tensioned and secured in the same way on the other three sides.

There are several other ways to construct such structures - from large plastic bottles, from glued bottles, and so on, but we believe that the most reliable and high-quality greenhouses will be those built using the technologies described above.

Secrets of building a structure

• It is worth collecting material for the greenhouse in advance, perhaps from the very end of summer, in order to collect the required amount for next spring.
• You can always buy additional bottles or ask neighboring summer residents who don’t need them.
• The material can be fastened together with thread, fishing line, wire, or it can be glued, slightly melting the edges over the fire.
• For construction and comfortable work the right decision will collect identical bottles. 1.5 liter containers are most suitable for comfortable construction.
• If you are worried about the strength of the walls and their stability, there are many ways to ensure these qualities - stretch nylon threads on both sides of the greenhouse more often, install thin sheathing, but every two or three bottles, install on both sides metal mesh, the thinnest, just tight.
• If it’s inconvenient for you to build a roof this way, you can always just stretch an inexpensive film. The main thing is that it lasts for one year, and the next year you can always buy a new one, because it will cost a penny.
• The door to the greenhouse can also be made from a bottle, but in order not to torture yourself, a frame door made of wood covered with film will be enough.

Inexpensive greenhouse made from bottles (video)

Choose a plastic bottle greenhouse and you will never regret it. Durability, strength, simplest assembly and minimal maintenance, quick replacement of spoiled elements, and most importantly - the ridiculous cost of the greenhouse. Agree, great idea!!!

Greenhouse structures made from plastic bottles (20 photos)

Reviews and comments

Oksana Dmitrievna 10/23/2014

Hello! I share mine interesting experience obtaining a rich harvest. I got it interview with Doctor of Agricultural Sciences Mikhail Chursin and inspired by the article, I decided to use his recommendations, and you know, I was right.. All summer we ate cucumbers and tomatoes from the garden, and also prepared zakat for myself and my family for the winter. For those interested, here it is Gleb 07/02/2014

Thanks for the detailed article! I also suffered with the film and have already started collecting windows from those who replaced wooden ones with plastic ones, I want to build a greenhouse out of them. I never even thought about building something out of plastic bottles. Although there is a lot of this “good” lying around. Now, after reading the article, I decided to try building one out of bottles. And I’ll get rid of the trash and the greenhouse will be built!

Oksana Vladimirovna 01/14/2016

This is a budget option for a greenhouse. But it’s still better to take it from polycarbonate. Plastic bottles somehow don’t look very aesthetically pleasing. It will be even more difficult to fit such a greenhouse into general form dachas, especially to suit the style.

Vera Vladimirovna 03/14/2017

This is some kind of nonsense! Where can I get so many bottles? If you buy so many yourself, then a polycarbonate greenhouse will cost less. Moreover, without a foundation, it will fly away in gusts of wind.

Lera 11/29/2017

This is the first time I’ve seen a greenhouse made from just such a material, it looks very strange. I think it's pretty good economical option, but it is not suitable for building a large greenhouse.

Add a comment