Do-it-yourself homemade products for the dacha from improvised materials. Homemade products for the garden and dacha: interesting ideas. Useful crafts for the garden

Do-it-yourself homemade products for the garden and garden not only perfectly complement personal plot, but will also help you save a decent amount of money. Today there are many useful devices for the garden, simplifying daily life. Usually, a large number of unnecessary things and materials that people do not use in their apartments are collected at the dacha. it takes up a lot of space. Any summer resident has the opportunity, using his imagination, to make simple homemade items.

Garden tools

When visiting hardware stores, many buyers note that the quality of garden tools does not correspond to their cost. Even an expensive and high-quality shovel is very easy to damage. One of the options is to personally make some kind of country tool that can perfectly replace a regular one. bayonet shovel. for example, a garden digger, which is not only very easy to make, but also easy to use. If we compare an ordinary shovel and this country tool, it can be noted that it is much easier for the second to dig the ground, and it does not place heavy loads on the human spine.

To make a digger for the garden with your own hands, you need those items that often lie and gather dust in the country. Must have:

metal sheet 2 mm thick;
metal pipe 0.5 inches in diameter;
2 bolts and 2 nuts;
2 engraver washers for the bolts and 2 hours of free time.

Needs to be cut a metal sheet into 7 segments, similar to stakes. That is, you should get a stake that is wide on one side and tapering to the other. Then, take a pipe 43 cm long and measure 5 mm from the edge. The following marks are made every 6 cm. Another 5 mm should remain on the other edge of the pipe, which should also be marked. Using a grinding disc on a grinder, you need to make cuts in the marked places to the middle of the pipe.

The cut stakes are taken (they will act as legs), inserted into the grooves cut in the pipe and secured by welding. The remaining pipes are then welded into a U-shaped handle and bolted to the workpiece. That's all, the digger is ready to use.

Garden decoration

We should not forget about the opportunity to become a designer of our own garden in the country. After all, you can make not only garden tools, but also much more. And to add some zest country house, you can post a beautiful and original garden path made of stone. Such a path will not only delight its owners, but will also become the latest trend, very popular among summer residents. For a stone path you will need:

stone used to lay out the path;
sand;
gravel and board 25-30 mm thick.

Work should begin with a preliminary measurement of the distance of the future path. To do this, four pegs are driven in and connected in pairs with a guide rope. Afterwards, you need to remove upper layer soil, or in other words, dig a trench. When working with a shovel, one should not forget about the level of the trench, since it is better to make it even in depth. This will not only help to use building materials correctly and economically, but will also simplify subsequent work. You need to install boards along the edges of the trench; they will act as sides into which sand and stones are placed.

First of all, gravel should be poured into the bottom of the hole. It will not only perform a shock-absorbing function, but will also provide indispensable assistance with drainage groundwater. Next, the gravel is covered with sand, which should be moistened in advance - this way it will lie more tightly. sand cushion It is best to do it with a thickness of 10 cm, and then you need to level the surface of the embankment with a board. Only after this can stone or paving stones be laid. It is necessary to calculate the thickness of the future path in advance so that you do not have to cut the stone again.

Mosquito traps

The invention fights not mosquitoes, but their larvae. It is suspended from tree branches. Mosquitoes lay their offspring in this device, which prevents the newly born mosquitoes from leaving it. For more effective fight with bloodsuckers you should make as many of these traps as possible. But even the use of this gadget cannot provide 100% protection from mosquito bites.

One of the most simple ways- This is to use an ordinary plastic bottle as a trap. Needs to be cut top part with a neck and insert it into the lower part so that the neck does not touch the bottom. Next, you should prepare a special solution that will attract mosquitoes. To do this you will need 15 g of yeast, 45 g of sugar and warm water. All 3 components need to be mixed and the resulting solution poured into the trap. Then, the bottle must be darkened. For this you can use dark fabric or thick paper. This trap can attract not only mosquitoes, but also cockroaches. Therefore, the owners of a house in the village have the opportunity to use it in their living space.

These were just 3 of the most interesting and easily made devices for the garden and garden. Do not forget that a person can create something more useful and unique from available materials, you just need to give freedom to your imagination.

Do-it-yourself homemade products for your garden and garden not only perfectly complement your garden plot, but will also help you save a decent amount of money. Today there are many useful devices for the garden that simplify everyday life. Usually, a large number of unnecessary things and materials that people do not use in their apartments are collected at the dacha. it takes up a lot of space. Any summer resident has the opportunity, using his imagination, to make simple homemade items.

Garden tools

When visiting hardware stores, many buyers note that the quality of garden tools does not correspond to their cost. Even an expensive and high-quality shovel is very easy to damage. One option is to personally make some kind of country tool that can perfectly replace a regular bayonet shovel. for example, a garden digger, which is not only very easy to make, but also easy to use. If we compare an ordinary shovel and this country tool, it can be noted that it is much easier for the second to dig the ground, and it does not place heavy loads on the human spine.

Homemade digger

To make a digger for the garden with your own hands, you need those items that often lie and gather dust in the country. Must have:

metal sheet 2 mm thick;
metal pipe 0.5 inches in diameter;
2 bolts and 2 nuts;
2 engraver washers for the bolts and 2 hours of free time.

You need to cut the metal sheet into 7 pieces, similar to stakes. That is, you should get a stake that is wide on one side and tapering to the other. Then, take a pipe 43 cm long and measure 5 mm from the edge. The following marks are made every 6 cm. Another 5 mm should remain on the other edge of the pipe, which should also be marked. Using a grinding disc on a grinder, you need to make cuts in the marked places to the middle of the pipe.

Garden decoration

We should not forget about the opportunity to become a designer of our own garden in the country. After all, you can make not only garden tools, but also much more. And to add some zest to your country house, you can lay out a beautiful and original garden path made of stone. Such a path will not only delight its owners, but will also become the latest trend, very popular among summer residents. For a stone path you will need:

stone used to lay out the path;
sand;
gravel and board 25-30 mm thick.

Work should begin with a preliminary measurement of the distance of the future path. To do this, four pegs are driven in and connected in pairs with a guide rope. Afterwards, it is necessary to remove the top layer of soil, or in other words, dig a trench. When working with a shovel, one should not forget about the level of the trench, since it is better to make it even in depth. This will not only help to use building materials correctly and economically, but will also simplify subsequent work. You need to install boards along the edges of the trench; they will act as sides into which sand and stones are placed.

First of all, gravel should be poured into the bottom of the hole. It will not only perform a shock-absorbing function, but will also provide indispensable assistance in draining groundwater. Next, the gravel is covered with sand, which should be moistened in advance - this way it will lie more tightly. It is best to make a sand cushion with a thickness of 10 cm, and then you need to level the surface of the embankment with a board. Only after this can stone or paving stones be laid. It is necessary to calculate the thickness of the future path in advance so that you do not have to cut the stone again.

Mosquito traps

The invention fights not mosquitoes, but their larvae. It is suspended from tree branches. Mosquitoes lay their offspring in this device, which prevents the newly born mosquitoes from leaving it. To combat bloodsuckers more effectively, you should make as many of these traps as possible. But even the use of this gadget cannot provide 100% protection against mosquito bites.

One of the easiest ways is to use an ordinary plastic bottle as a trap. You need to cut off the upper part with the neck and insert it into the lower part so that the neck does not touch the bottom. Next, you should prepare a special solution that will attract mosquitoes. To do this you will need 15 g of yeast, 45 g of sugar and warm water. All 3 components need to be mixed and the resulting solution poured into the trap. Then, the bottle must be darkened. To do this, you can use a dark cloth or thick paper. This trap can attract not only mosquitoes, but also cockroaches. Therefore, the owners of a house in the village have the opportunity to use it in their living space.

sadovod.guru

Homemade products for the garden and dacha: interesting ideas

For many, the private sector is associated with difficult permanent job. Plant a vegetable garden, monitor the growth of plants, and harvest. All this, of course, needs to be done. But if you organize the whole process correctly, then the work will be a joy. And there will still be a lot of free time for relaxation. And homemade products for the garden and dacha, made with your own hands, will help with this. Someone will object that everything can be bought ready-made in the store. This is true. But, firstly, there is not enough money to buy everything. And secondly, the process of making something useful from scrap materials can bring a lot of positive emotions.

Russian people have always been resourceful and inventive. And a huge number of hand-made homemade products for the garden and garden, photos of which can be found in our article, are proof of this. We will offer for consideration only a few options that will be useful in any area.

Many gardeners in Lately They prefer flower beds located in boxes. They are raised above ground level and fenced on all sides. This makes the maintenance process easier, and the garden bed looks more attractive and interesting. It is possible (or even recommended) to use such designs on meager nutrients soils.

Homemade products for the garden involve the use of scrap materials. Therefore, to construct the box, you can use boards left over, for example, from building a house. If you don't have them, you'll have to purchase them at the store. A box of arbitrary dimensions is constructed from them. Dimensions will depend on the size of the area, its styling and the plants that are planned to be planted there. The height of the side is made approximately to the knee, so that the layer fertile soil was thicker.

It is fixed to the bottom of the manufactured box metal grid with a small cell. It will provide protection against the penetration of rodents and moles. If there are none on the site, then you can do without a grid. You can easily make a small greenhouse from a box bed. Its height is selected taking into account the plants planted there.

Drip irrigation

Homemade products for the garden will simplify such a difficult process as watering plants. You can make a system drip irrigation. To do this, you will need a large barrel (metal or plastic), a hose, capillaries (you can make holes in the hose at a certain interval) and various connections(tees, clamps, etc.).

The barrel is raised approximately 1.5-2 m from the ground. To do this, you can weld a special stand from metal corners. Thanks to this, there will be stable pressure in the system. A main hose comes from the barrel. A filter must be installed on it so that debris does not clog the system. The capillaries are fed from the main hose.

DIY sprinkler

Homemade products for the garden and garden will allow you to create something necessary and useful on your site from improvised means and materials. For example, from old plastic bottles, which are always thrown away, you can make a sprinkler for your garden and vegetable garden. It will allow you to process and water the plants different heights. A sprayer is attached to the watering hose. The same spray nozzle is screwed onto a long stick (the longer the better). The lever is secured with a thread while pressed.

In a 1.5 liter bottle, a hole is made in the neck with a hot nail. A bolt is inserted into the hole and outside secured with a nut. The bolt must be drilled through with a drill. A hose is put on it and secured with a clamp. After applying pressure to the system, the nozzle spins and water is sprayed.

Tire compost bin

Old tires from passenger cars are one of the most popular and available materials for making homemade items for the garden. You can even make them compost pit. You only need 4 of them.

One of the tires, which will serve as a base, is cut. One side panel is cut off from it. From the rest, two sidewalls are cut off to form rings. Next, you just need to install the tires on top of each other in the designated area.

Bench

After all the work in the garden, you can relax. And on this score you can also choose suitable option handmade crafts for the garden and garden. With a small set of tools and materials, you can make an attractive, streamlined bench. It will become a place where you can relax and unwind.

Materials you will need:

A sheet of plywood (preferably pine) measuring 90 x 90 cm and 1.6 cm thick.
There are 7 slats made of the same wood (2 cm thick, 9.4 cm wide and 140 cm long).
Boards 2 x 6.9 cm and 100 cm long, 3 pcs.
Boards 2 x 6.9 cm and 140 cm long, 9 pcs.

The parts will be fastened with 0.5 x 5 cm self-tapping screws. In addition, glue for joining wooden elements, wood varnish, and turpentine will be useful.

The plywood sheet is cut into three parts. A template is drawn on them for cutting out the side panels and the central crossbar. The shape is cut out with a jigsaw. On the back there are 3 recesses for slats that will hold the structure.

Homemade products for the garden will help you make your own country life nicer and easier.

fb.ru

DIY crafts for the garden and vegetable garden (39 photos). Pond from an old bathtub. Pallet bench. Rake hanger. Flower pots made from shoes

It's no secret that today almost any gardening products are not cheap in stores. So, for example, purchasing various accessories will cost, as they say, “a pretty penny.” And if you make them “from scratch”, then you will spend no less, because starting materials you still have to buy it.

So why not save money and organize homemade projects for the garden with your own hands from what you usually have on hand or is inexpensive? Moreover, everything can be done really beautifully and neatly. And in addition it is also functional.

Crafts on the site

In this article we will look at the most useful homemade products with your own hands for the cottage and garden, which are distinguished by their simplicity and originality.

Beautiful “useful things” for the garden

One thing worth noting important point- you need to understand that only a small part of the list of crafts that can be made will be discussed. It’s just that these options are like a start, a “push” for imagination.

After all, here it is important to understand the very principle of how simple it is to organize everything, and then everything depends only on your imagination. So, let's begin the review.

Pond from an old bathtub

Pond from the bath

If you make a small reservoir of this type on a site, it will perform several functions simultaneously - we will familiarize ourselves with them in the table below.

Agree, the task is worth implementing. Moreover, for this you only need old bath, which in most cases is available on the site.

The pond is made according to this scheme:

We dig a hole with our own hands in the right place, which, according to its parameters, should be slightly larger than the dimensions of the bathtub.

Pit design diagram

Advice: be as responsible as possible when choosing a location. It is not advisable to place a pond too close to dining table, For example. The fact is that various midges, bees, etc. may periodically flock to the water.

And brushing away insects during lunch is not very pleasant, as you understand.

We lay several boards at the bottom of the hole - the bathtub will stand on them.
We insert the bathtub into the hole and level it. We close its drain hole with a plug. In this case, it is advisable to treat the outer edges of the cork with silicone to prevent water leakage from the container in the future.

Leveling the bathtub

We cover everything with earth free space between metal and soil.

Well, then all that remains is to decorate the structure. To do this, you can place it around the perimeter of the pond in the garden plot. beautiful stones or, for example, plant flowers. In addition, you can create an edging from boards or any wooden sheets, panels that are more or less resistant to moisture.

An example of board edging

As for filling the container, you can use it as water from central water supply, and natural flows. For example, you can bring the edge of the gutter to the bathtub drainage system houses and the pond will be filled with rainwater.

In principle, such homemade products for the garden can be slightly adjusted - use any tank, barrel, etc. instead of a bathtub.

Now let's look at another very convenient craft.

Pallet bench

Surely at some point you will want to sit in the garden - near artificial pond, For example. And then you will need one like this useful design like a bench.

Purchasing a new product is expensive. It is much easier to make a bench from a pallet - if it is not available, then, as a rule, a considerable amount of it is thrown away near large warehouses and factories.

The bench is made quickly.

Make a cross cut on one side of the pallet to the left of the reinforcement bars.

Cut line

On the other side, perform exactly the same operation, only on the other side of the bars.

Cut line on the other side of the pallet

We divide the product into two parts.

Dividing the pallet into two halves

We insert blocks of bars between the boards, as shown in the figure below. We get the back and seat.

The principle of connecting halves

We fasten the wood with self-tapping screws at all connecting points.

Fixation points

Photo of the lining under the bench

As you can see, everything is quite simple. Now you can paint the bench and install other homemade items for the garden and dacha.

Now let's look at a very functional, original and cheap craft.

Rake hanger

A hanger is a very necessary element. After all, you can hang not only clothes on it, but also a considerable part of various garden tools.

Of course, the “primitive” version of this design is ordinary nails or self-tapping screws. However, it looks rather unattractive, and besides, the nails tend to gradually loosen inside the holes into which they are driven.

And loosening means that such “hooks” will periodically fall to the ground. We offer a more original and reliable solution - to make a hanger from an old rake.

Rake hanger

You only need their metal part, without wooden handle. Even if such an element is not available in barns, purchasing it at the nearest market is not a problem. The price of the rake is acceptable for everyone.

The hanger is mounted like this:

We tie the wire to the two edges of the line on which the teeth are attached. In this case, there should be only one piece of wire. That is, it turns out that the fastener, in fact, resembles how paintings or mirrors are hung on a string.
We drive a large nail into the wall or any desired place and hang a rake on it.

The hanger is ready - you can hang anything you like on the rake teeth: shovels, caps, etc.

Now let's apply old shoes, which is usually a lot at the dacha.

Flower pots made from shoes

The ideal option is to have rubber boots, but in principle, regular leather shoes will do.

Shoe pots

From such shoes you can make non-standard flower pots, which will fit perfectly into the style of almost any garden.

The workflow here is like this:

We nail or screw the boots to the fence or any other suitable plane.
We fill each boot with soil.
We make several holes in the soles - they are needed to let out excess water.
Plant flowers in pots and enjoy appearance inventions.

An example of pots made from boots that are suspended from an arch

Note! Any DIY garden crafts can be “improved” ad infinitum. The main thing in this matter is to correctly organize the “basic” thought, idea.

And you can decorate the invention with anything and however your heart desires - there are no restrictions.

Remember this simple rule when planning “benefits” for your garden or vegetable garden.

This concludes our review of useful and original crafts for a garden plot and summarize the article.

Conclusion

As you can see, gardener’s homemade products are quite simple, and they can be made from almost anything. We hope that this article will become a catalyst for your ideas and you will be able to decorate your area beautifully. Well, if you want more information on this topic, we recommend watching the video in this article.

Add to favorites Printable version

9dach.ru

Homemade products for the garden / Samodelka.net - Do it yourself with your own hands | Homemade products. Useful tips and recommendations for the home craftsman

101 readers, 162 topics

Everything related to cottages, gardens, vegetable gardens and country houses. Tips on growing plants, making garden tools, homestead construction, etc., etc.

DIY drawings for a summer house and vegetable garden will be useful to everyone. A dacha is the ultimate dream of, if not every average person, then certainly every second person. Not everyone, of course, will be lucky enough to become the owner of suburban area, but those who are still lucky need to constantly monitor and improve it, which requires considerable expenses. Do-it-yourself homemade products for your dacha and garden help you keep your dacha in impeccable condition. Today we will tell you a few secrets on how to save money on buying the necessary things for your garden and make them at home. Of course, not everyone can make a grader with their own hands or self-propelled guns for a tractor, but most of the homemade products will definitely come in handy on the farm.

Do-it-yourself variator for a machine

If you need to constantly work at the machine, then frequent changes in speeds lead to wear on the unit and have the additional disadvantage of regularly stopping the device. As alternative option you can use a homemade variator for the machine. It can be made from wood with your own hands, without significant investment of time and money. The variator cones are made from hard wood, and you don’t have to use a lathe to make them; you can cut them at an angle using a jigsaw, equal to the angle cone inclination.

If you assemble a cone from disks, then you must glue them together or nail them. The finished cones are seated deep on metal rods and secured with screws. In order for the belt to move evenly on the machine, roller guides are required. Rollers can be taken from furniture fittings, but if they are not available, you can use ordinary bearings.

An old washing machine is a real treasure

If there is a working engine from washing machine, then this is a very valuable find, since many useful household devices can be made from it. The easiest way is to use an engine from a washing machine to make an excellent sandpaper for sharpening knives, different instruments and drills.

The main problem in making the device is attaching the sharpening stone to the engine body itself. In most cases, the whetstone has a hole that does not fit the motor shaft. That is why you need to make a flange that, on the one hand, can be pressed onto the shaft, and on the other, will have a thread, which will allow it to be screwed in and secured grinding wheel.

Image 1. Making emery from an old washing machine engine.

Experienced craftsmen recommend that beginners use old pieces of pipe 32 mm long and no more than 20 cm long as a flange. On one piece of pipe we make a thread whose length should be 2 times the thickness of the grinding wheel. The other end of the pipe is heated with a soldering iron and placed on the shaft. To better hold the pipe, it can be bolted together. After this, take 3 nuts and screw them onto the flange from the thread side until it stops, then put on the washer and, finally, the grinding wheel, then the washer again, and secure with a nut. At the end you can also add a lock nut.

The hardest work is done, after that all that remains is to fasten the motor, but this is a very individual procedure, since it is not known what holes are available on the motor from your washing machine for fasteners. Based on them, you need to make a stand; it is best to use small corners, fastening them together and placing the emery on the workbench. The final step will be connecting the engine to the electrical network. Look at ready-made option You can see the sharpeners in the photo, drawings are also included (image 1).

Image 2. Grill from a washing machine drum.

Homemade items for the dacha can also be made from other parts of the machine; for example, a drum can make an excellent kebab maker. Drum in washing machines They are made of stainless steel, which in itself is important, since the body is very strong and reliable. It’s very easy to make homemade items for a summer house from a drum; you just need to remove it from the machine body, but together with the shaft and pulley. We put the pulled out drum with the hatch on top and the wheel down. Now the brazier is ready, with the help of a grinder you can, of course, trim the front of the drum or the sides to make it more convenient to throw firewood, but here everything depends on your free time and imagination. This makeshift brazier looks very neat, with the drum dotted with small holes, which allows air to be evenly distributed over the coals and provide the necessary heat (image 2).

Hand-held circular saw from a grinder

Image 3. Device diagram circular saw.

The circular at the dacha is very useful thing, few people know, but it can be made from a grinder. You only have 2 elements left to complete: the sliding stop and the axial handle. After this, you will be able to use your circular saw from an angle grinder at any time.

2 small pieces will serve as a sliding stop metal corner. The edges of the corner are rounded so that they do not catch the part during processing. The corners are connected to each other at the back and front using bolts or nuts. A clamp made of metal tape must be placed on the body of the above-mentioned power tool. A folded strip of sheet metal or galvanized steel with a hole for the rear bolt of the sliding stop is attached to the screw tie of the clamp, which will be located below.

In the grinder gearbox we make 4 small holes for M5 bolts. For convenience, the gearbox can first be disassembled to better see where the hole can be made. These 4 holes are needed to attach the handle. The handle can be made from an ordinary metal tube. On this manual option grinder saw is finished if you want to make a real one stationary option circular saw, then you will need more skills in work, tools and well-calculated drawings (image 3).

Agricultural equipment and devices

Agricultural machinery is very important tools in the country, without which not a single owner can do. Agricultural equipment today costs a lot, and you don’t really want to spend a lot of money on something that is rarely used, but at the same time you can’t do without it. One of the most popular devices is a wheelbarrow; it can be made from improvised means, thereby saving a lot of money. To make it you need:

Image 4. Drawings of a homemade cart.

wheel, preferably made of rubber;
plywood;
2 corners;
wooden block, 3 m long;
nuts and axle from a bolt.

Manufacturing method of this instrument for a dacha is very simple and will be understandable even to a novice master, the main thing here is to measure everything clearly, because if you do it by eye, it will turn out crooked. Drawings of the wheelbarrow are attached (image 4).

No less popular tool for summer cottage, which in winter time will help get rid of snow, that is, a shovel can also be made from plywood. You will need:

plywood 10-12 mm thick;
wooden stalk;
nails;
steel plate 4-6 cm wide.

The plywood will serve as a shovel bucket, and the timber will allow you to hold the handle. Metal is used to edge the front and back parts of the plywood - the future bucket.

To cultivate a garden, a rake is often required. To make them you will need a wooden block 35 by 35 mm. The length of the handle can be adjusted at your discretion, but it is not recommended to make it too long, as it will be difficult to use. In addition to the bar and handle, you need to make at least 4 metal teeth. The metal must be strong so that it does not bend to the ground during operation. You can use metal from an old shovel and cut the teeth with a grinder. The teeth are aligned with a hammer and holes are drilled for the screws. Then the structure is fastened.

Video about making a cart with your own hands:

Design of a sprinkler for a vegetable garden

Homemade agricultural equipment also includes sprinklers for the garden, which can be made practically from waste that is found in everyone’s home. To irrigate your garden you will need:

spray;
rubber hose 3-4 m long;
plastic one and a half liter bottle;
pump;
a wooden or metal stick of any length, but the longer the better.

The sprayer is screwed to the stick with the top nozzle so that the lever is pressed using nylon threads. Wrap it tightly so that the sprayer does not move. After this, take a plastic bottle and use a hot nail to melt a hole in the neck. Then we push the bolt into the molten hole and secure it with a nut on the outside.

Before inserting the bolt, drill a through hole in it with a simple 3 mm metal drill. The hose is put on the bolt and secured with a small clamp using a screwdriver. We attach the second end of the hose to the pump and again secure it with a clamp so that everything is sealed.

The bottle contains poison for spraying beetles or water for watering crops. Screw the container to the top of the spray bottle, which is attached to a stick. Next, with the nozzle closed, we pump up the pump a little, after that we unwind the nozzle, and the sprayer starts working. In this way, you can spray trees of any height and large beds; if necessary, you can simply place the device on the ground and pump up the pump from time to time.

You can even make small greenhouses out of film at your dacha; you only need to drive a metal rod or stick into the ground and secure it to the base plastic film in the form of a cone.

Video about a drip irrigation system using a plastic bottle:

The film is secured from below in a circle from old barrel or adjusted with stones.

Conclusion on the topic

Now you know how to make expensive tools for a summer cottage without significant expenditure of money, time and nerves. The main thing is not what you use to improve your plot, but that you should like the work and being at the dacha should bring joy.

It's no secret that today almost any gardening products are not cheap in stores. So, for example, purchasing various accessories will cost, as they say, “a pretty penny.” And if you make them from scratch, you will spend no less, because you still have to buy the raw materials.

In this article we will look at the most useful do-it-yourself crafts for the cottage and garden, which are distinguished by their simplicity and originality.

Beautiful “useful things” for the garden

It is worth noting one important point - you need to understand that only a small part of the list of crafts that can be made will be sorted out. It’s just that these options are like a start, a “push” for imagination.

After all, here it is important to understand the very principle of how simple it is to organize everything, and then everything depends only on your imagination. So, let's begin the review.

Pond from an old bathtub

If you make a small reservoir of this type on a site, it will perform several functions simultaneously - we will familiarize ourselves with them in the table below.

Agree, the task is worth implementing. Moreover, all you need for this is an old bathtub, which in most cases is available on the site.

The pond is made according to this scheme:

We dig a hole with our own hands in the right place, which in its parameters should be slightly larger than the dimensions of the bathtub.

Advice: be as responsible as possible when choosing a location.
It is not advisable to place a pond too close to the dining table, for example.
The fact is that various midges, bees, etc. may periodically flock to the water.
And brushing away insects during lunch is not very pleasant, as you understand.

We lay several boards at the bottom of the hole– the bathtub will stand on them.
We insert the bathtub into the hole and level it. We close its drain hole with a plug. In this case, it is advisable to treat the outer edges of the cork with silicone to prevent water leakage from the container in the future.

We fill all the free space between the metal and the soil with earth.

Well, then all that remains is to decorate the structure. To do this, you can lay out beautiful stones around the perimeter or, for example, plant flowers. In addition, you can create an edging from boards or any wooden sheets or panels that are more or less resistant to moisture.

As for filling the container, you can use both water from the central water supply and natural flows. For example, you can bring the edge of the gutter of the house's drainage system to the bathtub and the pond will be filled with rainwater.

In principle, such homemade products for the garden can be slightly adjusted - use any tank, barrel, etc. instead of a bathtub.

Now let's look at another very convenient craft.

Pallet bench

Surely at some point you will want to sit in the garden - near an artificial pond, for example. And here you will need such a useful structure as a bench.

The bench is made quickly.

Make a cross cut on one side of the pallet to the left of the reinforcement bars.

On the other side, perform exactly the same operation, only on the other side of the bars.

We divide the product into two parts.

We insert blocks of bars between the boards, as shown in the figure below. We get the back and seat.

We fasten the wood with self-tapping screws at all connecting points.

Remaining wooden elements put them under the seat and use them to adjust the height.

As you can see, everything is quite simple. Now you can paint the bench and install other homemade items for the garden and dacha.

Now let's look at a very functional, original and cheap craft.

A hanger is a very necessary element. After all, you can hang not only clothes on it, but also a considerable part of various garden tools.

And loosening means that such “hooks” will periodically fall to the ground. We offer a more original and reliable solution - to make a hanger from an old rake.

You only need the metal part, without the wooden handle. Even if such an element is not available in barns, purchasing it at the nearest market is not a problem. The price of the rake is acceptable for everyone.

The hanger is mounted like this:

We tie the wire to the two edges of the line on which the teeth are attached. In this case, there should be only one piece of wire. That is, it turns out that the fastener, in fact, resembles how paintings or mirrors are hung on a string.
We drive a large nail into the wall or any desired place and hang a rake on it.

The hanger is ready - you can hang anything you like on the rake teeth: shovels, caps, etc.

Now let's use old shoes, of which there are usually a lot at the dacha.

Flower pots made from shoes

The ideal option is to have rubber boots, but in principle, regular leather shoes will do.

From such shoes you can make custom flower pots that will fit perfectly into the style of almost any garden.

The workflow here is like this:

We nail or screw the boots to the fence or any other suitable plane.
We fill each boot with soil.
We make several holes in the soles - they are needed to let out excess water.
We plant flowers in pots and enjoy the appearance of the invention.

Note!
Any DIY garden crafts can be “improved” ad infinitum.
The main thing in this matter is to correctly organize the “basic” thought, idea.
And you can decorate the invention with anything and however your heart desires - there are no restrictions.

Remember this simple rule when planning “benefits” for your garden or vegetable garden.

This concludes our review of useful and original crafts for the garden plot and sums up the article.

Conclusion

All dacha owners one day think about decorating it, adding something special to the atmosphere. Of course, you can go to specialized stores and buy whatever your heart desires. But if summer residents want their vacation spot to be unique and inimitable, then it will be much more interesting to make the decorations with your own hands. Jewelry made independently will give the owners both a creative mood and aesthetic pleasure.

Choosing original ideas for a summer residence

Each dacha owner, if desired, can find a lot of the most different ideas to decorate your site. To make most of the decorations, only improvised means and minimum costs. And the old one unnecessary furniture and interior items will further inspire creativity. Often seemingly completely useless and forgotten things can come in handy. Country designers use in their work everything that comes to hand: broken old furniture, unnecessary toys, various bottles and dishes, car tires, remaining building materials and much more.

No dacha decoration is complete without intricate, interesting flower beds. Uniqueness flower arrangements you can add them by planting them in old containers. These can be barrels, pots, and even carts. Many summer residents build various picket fences for flower beds.

They will always add comfort original tracks on a summer cottage. They are made from timber or stone. And leftover materials can always be used to build another composition.

Particularly popular with country designers use bottles and plastic jars. From them it is easy and simple to build many interesting sculptures, decorations for flower beds, and borders. There are no limits for imagination here.

You should definitely place a bird feeder in your dacha. Children usually love to watch birds. And with a feeder, birds will be a frequent visitor to your summer cottage. It can be made from a plastic bottle, from an unnecessary block of wood, or from twigs.

Without much difficulty, you can make a variety of figures that will bring comfort and individuality to the countryside atmosphere. To make them, you can use a variety of design solutions and materials. For example, polymer clay, leftovers polyurethane foam, gypsum and other building materials. You just have to start creative work and it will immediately become clear that nothing is impossible.

Crafts from improvised materials

The most popular among available materials for crafts are bottles, various plastic jars and boxes. Before starting work, you should definitely think through the details so that the result is truly beautiful and does not resemble a pile of plastic waste.

Plastic bottles are easy to cut and it is easy to shape them the required form. And if you cover the result of the work suitable paints, then you get bright, unique decorations for your dacha. For example, you can make figures of animals (pigs, cows, bees) or fairy-tale characters. By making such decorations, you can unleash your creative potential, and each time the crafts will become more and more perfect. At large quantities unnecessary plastic, it is used to make not only crafts, but also pieces of furniture.

If you have a glass cutter among your tools, you can make original pots from glass bottles. Such crafts look very stylish and easily fit into any design. Candle stands can be made in the same way.

Bottle caps can also be useful for decorating furniture, decorative fences, creating compositions and even curtains. You can also use containers from chocolate egg toys.

Leftovers natural stone Perfect for decorating a pond in your country house. A small pond will add unique comfort to the atmosphere of the dacha. Flower beds, crafts or a recreation area will look good around. If the pond turns out to be large enough, then it can be decorated with an interesting bridge.

Every motorist always has old tires. You can simply paint them and make bright bases for a flower bed, or you can show your imagination and cut out various shapes.

Arrangement of a play area at the dacha

When landscaping and decorating your summer cottage, don’t forget about the children. They need their own territory for games and entertainment. Children of any age love swings. They can be made from ordinary boards and ropes, or use metal chains and old tires painted in bright colors. It’s easy to build slides and swings from scrap materials. The main thing is that everything is strong and reliable.

For kids, you will definitely need a sandbox. Its borders will look interesting from multi-colored bottles or wooden log houses. A sandbox in the form of a ship or car will look original. It is recommended to make an awning over the sand to protect from the bright sun.

Children will definitely love having their own playhouse on a summer cottage. Benches, a table or other furniture can be placed inside. It all depends on your imagination. The house can be decorated with a bright flower bed or homemade decorations. Usually the children themselves are happy to take part in decorating their territory.

Ideas for decorating a fence at the dacha

The uniqueness of the dacha plot is best emphasized by its fencing. A fence is not only the protection of territory, but also the so-called business card owners.

Simple wooden or iron fence– it’s banal. It definitely needs to be decorated. You can decorate the fence in the most different materials: flower pots, crafts in the form of animals, painted landscapes and everything your imagination allows for. For example, unnecessary brightly colored rubber boots will look original as pots.

You can decorate the fence with old discs. They reflect sunlight and look interesting in any lighting. You can also apply different patterns to the discs.

A fence made of round timber, painted to look like colored pencils, looks impressive. This fence can also be used to fence off a children’s area in a dacha.

Any fence will look cozier if some climbing plants grow along it. Eat different kinds, which grow very quickly. For example, decorative beans or morning glory. You can plant vines. They grow much slower, but also look more expensive. There is no comparison in this case with wild grapes. Grape leaves gradually change their color and retain their beauty until frost. It looks original when the “grape fence” turns into a canopy. This design gives the fence an antique look.

Beautiful decorations for a low fence will be flowering shrubs, planted along it. You can combine plants with different colors and flowering time.

IN evening time The different lanterns on the fence look beautiful. It’s also possible to make them yourself from scrap materials. Or you can just paint them glass jars attached to the fence, place candles. The main thing is that the flame does not reach the fence.

Lovers of drawing will have a lot of room for imagination. You can draw anything on the surface of the fence: nature, scenes, cartoon characters, ornaments, small patterns in the form of flowers, butterflies, ladybugs. It’s easy to draw on any fence, but it’s easier on a fence made of corrugated board.

Compositions made from lids, shells, stones, and dishes look original. It’s easy to make plastic flowers from the bottoms of bottles and paint them in rich colors- they will look beautiful on wooden fence.

We design flower beds and flower beds

Flower beds will help transform your dacha plot and add color to its atmosphere. When choosing plants, you should definitely take them into account individual characteristics. First of all, you should decide on the “soloist” flowers, that is, the main plants in the flowerbed. The choice can be made of three or four types.

Decorating flowers with ornamental grasses and interestingly shaped leaves looks beautiful. With them, the flowerbed will be original, even when the flowers are not blooming. But you shouldn’t try to place a lot of different plants. The territory of the site should look holistic and harmonious.

Of course, it’s not enough just to plant flowers beautifully. Flowerbeds also look more original if they are decorated around them. The composition must be complete.

Flower beds can be decorated using any unnecessary items. The article already mentioned that it is not difficult to make small flower beds from old tires painted in bright colors. You can use a wheelbarrow, cart, an unwanted beehive, or even an old car. The main thing is that everything is done carefully and aesthetically. If desired, you can add decorations to the flower garden in the form of homemade bees, butterflies, and interesting stuffed animals.

You can make a small fence around the flowerbed. To make it, you can use plastic bottles or cups, fencing made of tyna, and stones. The flower bed looks beautiful and smoothly turns into a lawn.

Setting up a relaxation area

The dacha must have a comfortable place to relax. fresh air. This issue must be approached very responsibly. It all depends on the preferences and desires of the owners. This could be simply a laid out area with a table and comfortable chairs or hammocks placed in the shade.

A gazebo, which can be made from the remaining building materials. Gazebos whose walls are decorated look beautiful climbing plants. Bright colors look cozy as decorations. soft pillows or blankets.

Swings can be not only for children, but also for adults. It will not be difficult to build wide wooden swing for relaxation or make canopies somewhere in the shade of trees. For convenience, they can be decorated with soft pillows.

You will definitely need a barbecue in the recreation area. It can be made, for example, from an old barrel. For evening and night time, flashlights can be provided.

When designing and decorating a dacha plot, it is worth remembering that a dacha is a place of rest from the everyday life and bustle of the city. It should be comfortable and calm, and the environment should be pleasing to the eye. It is important not to overload the area with crafts or other design solutions, everything should be in moderation. Imagine, create, surprise!