Log bathhouse 4x5 with 2m terrace

• Log bathhouse with removal under the terrace: 4x5✛2m
• Area under a common roof: 30 m2
• Height from floor to ceiling: 2.15-2.20 m
• Height from ceiling to ridge: 2.50 m
• Fundamental concrete blocks
• Log terrace support posts
• Frame of a terrace made of logs with removal under a common roof

Addition to standard equipment:

Standard equipment

lining for the ceiling

two bath doors 175x75 cm (without fittings)

two double windows 50x50 (without glass, without fittings)

floorboard (tongue and groove 38 mm)

foundation concrete blocks for the terrace

delivery, unloading and assembly included in the price

Delivery

• 1 DRAW YOUR ATTENTION TO! We deliver logs of bathhouses and houses own transport and only to the following cities and regions:
  • Moscow and Moscow region
  • St. Petersburg and Leningrad region
  • Kaluga and Kaluga region
  • Tula and Tula region
  • Tver and Tver region
  • Bryansk and Bryansk region
  • Ryazan and Ryazan region
  • Veliky Novgorod and Novgorod region
  • Pskov and Pskov region
  • Vladimir and Vladimir region
  • Yaroslavl and Yaroslavl region
  • Kursk and Kursk region
  • Smolensk and Smolensk region
• 2 The base price includes delivery up to 80 km from the Moscow Ring Road and 50 km from the Ring Road.
• 3 When calculating the additional payment for delivery, geography is taken into account, but if your site is located on the Kiev, Minsk, Novo-Rizhsky highway, then no additional payment will be required, since the production base is located in the village of Usvyaty, Pskov region.
• 4 Don’t forget to take the phone number of the KAMAZ driver or assembly foreman in order to accurately determine the delivery time.
• 5 The customer ensures unhindered passage of our freight transport. In case of difficulties in getting to the customer's site, additional costs for special services. The customer takes care of the equipment (all-terrain vehicle, tractor, etc.).

• 1 When ordering standard sizes log bathhouses (cut into paws), the customer pays 50% of the cost upon delivery of the product to the land plot, and 50% after acceptance of the work.
• 2 Log houses of baths and country houses size 5x6 and bigger size, as well as chopped into a bowl, are paid: 20% upon conclusion of the contract, then payment of 40% upon delivery of the products to the land plot and 40% after acceptance of the work.
• 3 We do not accept payment from “maternity capital” funds.
• 4 Payment on credit and in installments is not provided.
• 5 We do not provide payment discounts to clients who have various types of social benefits.

Rafters - bearing structures pitched roof.

Additional services

In this version of a 5 by 4 log house there will be space for a steam room and a relaxation room or dressing room. An increase in area (and with it an increase in cost) is achieved by adding an additional attic floor and a covered veranda. This option is more suitable for those who like to relax on fresh air, or those who need to arrange additional rooms for sleep and rest. A 5 x 4 log bathhouse is 20 m2 of space that the owner can use at his own discretion. Appearance The building will fit perfectly into the surrounding landscape of the site and will become its key element.

Construction of medium-sized baths, standard projects 4x5 and 4x6, individual construction medium-sized premises, the current project of a 6x4 log house in a short video from the user.

The origin of the ritual of purification through visiting a steam room is rooted in the deep past. The Russian soul is deeply convinced of the healing properties of the bathhouse. Hot steam not only gives strength to the body, but also calms the mind. There is a strong opinion that when visiting a steam room, a person uses an additional source of energy, thanks to which life expectancy increases.

Features of the construction of medium-sized baths

Proper construction of a bathhouse will ensure its functionality for a long period of time. Therefore, designing for the average family appeals to modern building materials, while at the same time relying on the experience of our ancestors. Wooden structures that have survived to this day fully provide unique information about how our predecessors built several centuries ago. Ancient wooden architecture conveyed to us the most basic information, namely, how to preserve wood from destruction for tens, or even hundreds of years.

The most optimal choice premises wooden bath for the average family, is a building measuring 4.0x5.0 or 4.0x6.0 meters. Depending on the wishes and capabilities of the customer, rounded logs, profiled timber or frames are used as building materials for the construction of walls.

The main step before starting construction work is to decide on the exact location where the future structure will be located and only after this stage should construction work begin.

It's important to know that

When designing a bath room, it is advisable to pay attention to which side of the world the window openings face. If possible, it is advisable to place the windows of the rest room to the west so that the evening sun creates a unique comfort against the backdrop of the passing day.

A foundation must be laid for a bathhouse made of any material. As a rule, it is laid strip foundation, with a height of at least 0.5 m and a width of 0.3 m. Some prefer to install the structure on the piles of a screw foundation, as a type of especially strong foundation that can withstand the significant weight of the structure installed on it.

At a distance of two meters from the foundation line, place drain hole, to which they are taken sewer pipe, laid in a specially dug trench.

The thickness of the walls is at least 18 cm, therefore, a log with a diameter of at least 18 cm is used for the log house. But wood is a natural raw material, so the diameter of each tree trunk differs from one another. When constructing walls, logs are selected in such a way that an alternation of thick and relatively thin logs is maintained. Due to this installation, the building has a unique appearance.

When forming walls, wood is laid in their lower part deciduous trees, and in the upper part coniferous species are used. The best material for building a log house is cedar wood. Part of it is used for internal partitions buildings, some for interior decoration. Between the stacked logs, in order to avoid the formation of cracks during wood drying and shrinkage of the log house, use special material for caulking them. In most cases, jute rope is used. IN Lately A new insulating material – flax fiber – has achieved great popularity. Environmentally friendly, non-flammable heat insulator, specially designed for construction purposes.

The roof covering also depends on the client's capabilities. The roof covering can be either tiled or slate. Arrangement attic space baths are very diverse and depend on the features of the design itself. In some cases, the attic is equipped for housing, in other cases they simply store bath paraphernalia and utensils, some customers ask to include a garage space in the project and equip it.

Interior arrangement of the bathhouse

The arrangement of shelves inside a paired room has a very great importance. The upper stationary non-removable shelf is placed at a distance of at least 0.9-1.0 m from the floor level. The wider, middle shelf is placed between the lower bench and the upper shelf.

It's important to know that

If the floor of the paired compartment is tiled or ceramic, the bench should be installed so that it supports the shelves.

Historically, the bathhouse structure consisted of two rooms - a steam room, which carried an additional load as a washing compartment, and a dressing room, with the function of a vestibule, locker room, rest room and even a furnace room. Modern projects even suggest the presence of separate rooms for a steam room, a locker room, and a dressing room. Medium-sized buildings already have additional rooms or areas, including a relaxation area, in which a small pool or plunge pool can be arranged, a modest Gym or a treadmill is installed.

The materials used for construction are also very different. Today, in addition to wooden baths, you can find stone, gas and foam slabs, expanded clay concrete or built of brick. Depending on the project, they can exist in direct connection with the house, be located on the ground floor of a residential premises, or be a separate building on the site. The most popular are bathhouses made of logs or built separately, at least 15 m from a residential building. IN modern construction Instead of logs, planed profiled timber is most often used.

Project selection

The design of the bathhouse is selected based on many factors, the most fundamental of which is the connection to the size of the existing territory. To do this, a place is selected for the future building, where the bathhouse will fit organically, either into an existing ensemble, or harmoniously fit into the project of a residential complex planned for construction on the site.

Bathhouse project 4 by 5 meters

The room is medium in size, intended for use by a large family. In its structure, the bathhouse contains three main rooms - a steam room, a locker room and large room, used at the discretion of the customer. In some individual projects it is turned into a collection of small but very functional spaces. This could be a storage room combined with a shower bathroom, or their separate arrangement. It can be used entirely as a large relaxation area or combined with a miniature gym where exercise equipment is installed. When internal changes are made to the project regarding the position and transfer of walls and doorways, you can organize additional rooms and add an addition in the form of a second vestibule, which is so necessary in winter period to retain the masses of cold air coming from the street into the warm bath room.

A heater stove is used as a heating system, located in the steam room so that one of its sides is part of the wall of the dressing room. As additional source heat is set to water or gas heating again depending on the owner’s capabilities and his desires.

When using a bathhouse seasonally according to a 4 by 5 project, planning a heating system does not make sense. The unused area for the heating system can be used as a terrace or veranda, as extra bed for relaxation outside the premises. Under the terrace, as a rule, flower beds or a flower garden are laid out, so the initial choice of location for the bathhouse on the site is very important, since flowers need sunlight and it is necessary that the building does not block the power source for green spaces.

Bathhouse project 4 by 6 meters

The variety of projects is very inspiring with its uniqueness, originality,... The development of medium-sized premises is very popular - 4.0 by 5.0 and 4.0 by 6.0 meters. Modification of baths with dimensions of 4.0x6.0 meters has an undeniable advantage, since rectangular shape allows it to be positioned in a very advantageous manner in relation to the house. When choosing a project with an attic, the value of such a room increases significantly, since as soon as the building is ready, you can live in it and continue developing the site. In the future, the bathhouse with an attic floor will be perfectly reformatted into small house for guests. You can also attach a veranda, terrace or unheated pool under a protective domed ceiling.

Video of the current project of a 6x4 meter log bathhouse

Standard equipment

The standard package of a bathhouse made of planed profiled timber includes the following structural elements:

• support-column foundation;
• the frame, or the base of the bath, is made of beams, measuring 150x100 mm;
• floor joists with a pitch of 0.7 m - a timber measuring 150x40 mm is used;
• main walls are made of timber, dimensions 100x150 mm;
• The internal walls are made of timber laid on edge. The profiled beam has straight sides with chamfers and is equipped with a groove and a tenon.

As insulation material For the inter-crown opening of the log house, flax or jute fabric is used, for the ceiling and floor - mineral or basalt slab wool, 50 mm thick. It is advisable to use steam and waterproofing from TM “Izospan”.

For the construction of the subfloor and roof sheathing, use edged board coniferous species. It is acceptable to use pine wood. The finished floor is covered with floorboards made of coniferous wood. As a rule, larch is used for tongue-and-groove flooring boards with a thickness of 27 mm. All elements are forced drying with a maximum humidity of no more than 15%.

The standard package of the 4 by 5 and 4 by 6 project made of planed profiled timber includes covering the ceiling, floors and corners in all interior rooms of the bathhouse with plinths.

The ceiling height of the paired compartment according to the project is 2.1 m with aspen paneling. An aluminum foil heat reflector is used as thermal insulation. The premises of the washing department and dressing room are not lined with wooden paneling. IN washing department shower tray is installed.

It's important to know that

As a rule, the bathhouse projects being developed do not include the provision of stove equipment.

The ventilation system is represented by an vent - ventilation window, going outside. The roofing as standard is made of red ondulin, but if the customer wishes, the color or the material itself can be changed.

If there is an attic floor in the project, it is made from frame panels finished with pine lining.

All window openings are equipped with insulated joinery - double-glazed wooden frames. Polished or paneled doors are hung in the doorways of the main rooms; a bath set measuring 1800x800 mm is intended for the paired compartment.

Having your own bathhouse on site is the dream of many. It’s nice to come at any time and take a steam bath with a broom, then drink tea on the veranda, without having to time it, because every hour of visiting is paid. Moreover, today's choice building materials is rich and varied, so building a bathhouse yourself is not that expensive.

The bathhouse may have different sizes, you should choose based on the size of the area, budget and the number of people who will go to steam. The 4x5 m bathhouse project is one of the most popular options, which is close to the ideal -.

4 by 5 bathhouse project: advantages

• A bathhouse of this size is quite compact, so its construction is possible even in small areas. At the same time, a 5 by 4 bathhouse will be fully functional: it will fit all the main rooms, and the design of a bathhouse of this size may include a veranda, toilet, etc.;
• 3-4 people can fit in the steam room of a 4x5 bath at the same time. Of course, this is a small company, but for family use a building of this size is optimal;
• low fuel consumption and quick heating of the steam room. The larger the steam room, the higher the fuel consumption and the longer you need to wait until the desired temperature. The 4 by 5 bathhouse is small, so the necessary conditions are quickly achieved;
• simplicity of design. The bathhouse is small, so its construction will not cause any difficulties, and you can easily;
• low cost of building a bathhouse. This advantage follows from the previous one: there will be no difficulties in constructing such a building, installation is simple, so there is no need to pay builders, you can do everything yourself. But even if you decide to hire a team of workers, you will have to pay less than for construction large sauna. In addition, the consumption of materials for the construction of a bathhouse is 4 to 5 less, therefore its cost is also lower.

Bathhouse 5 by 4: projects, photos

Purchasing a finished project is a simple and convenient way, but it is paid. If you want to save money, you can find finished project on the Internet or develop your own. Bathhouse 5x4 has small dimensions, so drawing up a drawing on your own should take place without

Despite the small dimensions of the bathhouse, projects can be different. When drawing up a drawing, it is necessary to indicate the dimensions of all rooms, determine the location of the stove and shelves, think about where the windows and doors will be located, as well as ventilation ducts, chimneys, pipes and electrical wires.

The standard layout of a 4x5 bath includes a steam room, a washing room and a relaxation room. In some cases, for example, in small baths, the steam room and washing room are combined. But a 4x5 bathhouse is quite spacious, so planning a 4x5 bathhouse with a sink and a steam room separately can be easily implemented, and it makes no sense to deprive yourself of amenities by combining these rooms unnecessarily.

The size of the steam room depends on how many people will be steaming in it at the same time. For rational use area it is better to make two-tier shelves. Minimum size steam rooms - 2x2 m.

The sink can have different sizes. Many people make it the size of a steam room, while others, on the contrary, reduce it to such a size that only a shower stall can fit in it.

If you need to increase the capacity of the bathhouse, then it is better to do this just at the expense of the washing room, since this is the room into which they enter one at a time, while a whole group sits in the steam room and relaxation room.

The rest room should be large enough to accommodate a table and chairs. Usually this room is the largest, since several people often go to the steam room, and everyone else sits here. If the rest room serves as a dressing room, then you must also provide a place where you can leave shoes and outerwear.

If you want to go to the bathhouse when it’s cold outside, then a reasonable option would be to do small vestibule. 1 m wide and 3-3.5 m long will be enough. It is better to place the entrance on one edge, in which case you will have space to store firewood and other necessary things.

Despite the small size of the 4x5 bathhouse, photos of the layout inside prove that various additional rooms can be created in it for greater convenience. For example, if you install a toilet, visiting the bathhouse during the cold season will be much more convenient.

Availability own terrace will give you the opportunity to relax in nature, breathing fresh air and admiring the surrounding landscape.

It would be best to build a bathhouse next to a pond, but not all areas have access to a pond or river, in which case a good option would be project of a bathhouse with a swimming pool. After warming up in the steam room, it is useful to plunge into cool water; this procedure strengthens the body and increases its protective functions.

A simple bathhouse project 5 by 4 m

This project includes three rooms: a steam room, a shower room and a relaxation room, which also serves as a dressing room. There is nothing superfluous in this project, the bathhouse is simple, and its premises are quite spacious.

The shower room has a sufficient area, so you can install not only a shower stall in it, but also an additional font.

The absence of a dressing room has a drawback: the cold from the street will get directly into the rest room, so this project should be chosen by those who plan to go to the bathhouse only in the warm season.

Project of a 4x5 m bathhouse with a porch

In this bathhouse, just like in the previous one, there are only three rooms. But there is a spacious steam room here, while the shower room is small. Thanks to the spacious steam room, this sauna has more capacity, so if you are going to steam with a large group, it is better to choose this option. Project of a 5x4 m bathhouse with a terrace

In this project, the steam room, washing room and relaxation room are quite small, but there is a terrace, which is a significant advantage. This project is optimal for those who go to the bathhouse only when it’s warm outside. Having your own terrace is a great opportunity to relax between visits to the steam room, not in a stuffy room, but in the fresh air.

The 4 by 5 bathhouse project is an excellent option for small areas. As you can see in the photos above, the layout of a 4x5 bathhouse makes it possible to place everything you need, while its construction will be inexpensive and will not cause difficulties.

A bathhouse measuring 4x5 m is an excellent option for small area. Subject to proper planning, on the mentioned quadrature it is possible to arrange a relaxation room, steam room, washing room and small additional rooms, if their presence is necessary. At the same time, it is recommended to make the steam room and washing room in separate rooms - this is simply more convenient for visitors to the bathhouse.

Beautiful bathhouse 4x5 m with separate washing and steam rooms

After reading the information below, you will learn about the basic regulatory requirements for each bathhouse room, receive recommendations for planning a steam room, washing room and other important departments, and also consider several of the most successful and popular projects baths 4x5 m with separate steam room and sink.

Example unusual design steam room separated from shower

The space provided by the bathhouse, measuring 4x5 m, is enough for a completely comfortable holiday with a family or small company of 3-4 people.

In accordance with current regulatory requirements, each visitor to the steam room should have at least 1-1.2 m2 free space, if a person steams while in a sitting position. If the bath lover lies down or prefers to take some other possible position, the requirements for the dimensions of the steam room will change accordingly.

These points must be taken into account when designing a bathhouse in general and shelves in a steam room in particular. Information regarding possible body positions in the bath and recommendations for shelf sizes for each of them are shown in the following image.

Regarding area wash room, the recommendations are similar - at least 1-1.2 m2 for each visitor. In order to save space, the sink, as a rule, is made of relatively small sizes so that there is enough space for 1-2 visitors who come here at the same time.

A modern compact shower cabin will allow you to effectively solve the problem of distributing free space in the wash room. In general, the dimensions of the washing room can increase depending on its operating conditions. For example, if the owner decides to install a boiler here to heat water or even washing machine(relevant when arranging a bath house), the size of the room will have to be increased accordingly.

The recommended height of the steam room is about 210 cm, the washing room is 220-230 cm. When designing a steam room, you should adhere to the rule that there should be at least 110 cm of free space between the ceiling and the top shelf. It is also important that the top shelf in the steam room is arranged higher than the stove - the requirement is dictated by considerations according to which it should be the hottest on the top shelf of the bath. Directly heater (the most popular option sauna stove) is placed at an average height of 100 cm from the floor. For other types of sauna stoves, the requirements are determined individual characteristics units used.

To prevent water from splashing from one room to another, door thresholds are installed approximately 200-300 mm above the floor. The requirement is also relevant for the main entrance door; if the bathhouse is not equipped with a porch/terrace/veranda, then the high threshold will not allow melt water to penetrate into the room in the spring, and will make the process of clearing snow more convenient.

For ease of use, front door it is better to orient to the south - in winter time You will have to remove less snow. Regarding the orientation of windows, everything depends on the characteristics of the individual user. For example, if the owner likes to go to the bathhouse in the morning, it is more advisable to place the windows to the east, if in the afternoon - to the west. If the bathhouse will be used after sunset, the location of the windows is not important.

Video - Mistakes when arranging a bathhouse

The steam room is the heart of any bathhouse, and the requirements for it are appropriate. With information regarding key points For planning a paired room, you are invited to familiarize yourself with the following table.

Table. Requirements for the steam room

Characteristics	Explanations
	For arranging a steam room, it is most advisable to allocate space on the first floor. It is more convenient if you can go from the steam room to a wash room, a room with a swimming pool (if provided for by the project) or a relaxation room. When choosing a door for a paired room, it is recommended to give preference to a product made of tempered glass. If this is not available, you can use a wooden model, but there should be no metal inclusions in its design - you are unlikely to be happy if you get burned on hot metal one day.
	As noted, one seated steam room visitor needs at least 1-1.2 m2 of free space. The oven will occupy about 1 m2. Additionally, you need to include in the project the space occupied by the aisles. Therefore, the minimum allowable area of ​​a steam room designed to accommodate one visitor at a time is 2.5-3 m2. In accordance with the above diagram, the optimal dimensions of the steam room are calculated taking into account the planned number of visitors. The recommended height is 2.1 m. If very tall people go to the bathhouse, this figure can be increased to 2.2-2.4 m. It is not advisable to make this parameter more impressive - heating the surrounding space will require increased energy consumption.
	The optimal width of “lying” shelves is no less than 0.9-1 m, length – 1.8-2 m. In the case of “sitting” shelves, the optimal width is considered to be from 0.4-0.5 m, the length is selected in accordance with the dimensions of the steam room. Bath shelves are installed in 1-3 tiers, depending on the wishes of the owner and the height of the steam room. The recommended height of each tier is 350 mm. High-quality wood is best suited for making bath shelves hardwood. Linden has proven itself well. The use of larch and cedar is also acceptable. When choosing material for making shelves, make sure that it is dry, not rotten, and does not have resin pockets, knots or unsanded areas.
	To organize lighting in the steam room, lamps with wooden shades are used, designed for operation in similar temperature and humidity conditions. Regarding the brightness of the lighting, each owner makes his own decision. The best option is soft twilight - everything is clearly visible and the light, at the same time, does not “hit the eyes.”
	As a rule, the stove is installed opposite the shelves, closer to the door to the steam room. Choosing a Specific Variety heating unit remains with the owner. Classic option is a brick stove. If desired, the steam room can be equipped with a metal wood stove or even a modern electric heater. The distance between the heating elements of the furnace and flammable objects/surfaces in the absence of fireproof insulation is at least 300 mm, in the case of arrangement of the mentioned protection - at least 100-150 mm. For insulation you can use brick, asbestos cardboard, stainless steel sheets, ceramic tiles. The stove, the operating principle of which is based on the combustion of fuel, must be equipped with a chimney leading from the steam room to the street through the floors and roof.
	Traditional option for finishing walls and ceilings - wooden lining. It is best to use boards made from hardwood. Conifers Although they have a subtle aroma, when heated they can release resin that unpleasantly burns the skin. Important! It is prohibited to use any products made of PVC, rubber or plastic to decorate the steam room - in such temperature conditions they either quickly deteriorate or, in addition, emit substances harmful to human health. To finish the floor, either edged/groove boards are used, or ceramic tile- at the discretion of the owner. There is no need to use plaster, paints, chipboard, plywood and other similar materials for additional decoration - in the temperature and humidity conditions typical for a bathhouse, they will deteriorate very quickly. If desired interior decoration steam rooms can be made using thermal and moisture resistant cork covering, designed specifically for use in such conditions, but it is very expensive.
	If there is a ventilation duct, installing a window in the steam room is not necessary. In general, for greater comfort in the operation of this room, you can install a small window with dimensions of 300x300 mm, 400x600 mm or 600x600 mm - these are the most popular options. Important! As the window area increases, heat losses directly increase. The window is installed on a free wall that is not adjacent to either the shelves or the stove. When choosing the window installation height, be guided by simple rule: minimum permissible distance between the floor and the lower sash - 1.7 m. The frame material is wood or high-quality plastic, capable of maintaining its integrity and key characteristics at temperatures up to +120 degrees.
	For greater ease of use, the steam room should be equipped with additional elements, the compilation of a list of which is at the discretion of the owner. For example, you can install headrests for shelves, buy or make a ladle, tub, purchase and install a thermometer and hygrometer, etc.

Video - What should a steam room be like?

Design of a washing room

Generalized recommendations regarding the design of a washing room were given earlier. Now you are invited to familiarize yourself with the main stages of the event in more detail. Information on this matter is presented in the following table.

Table. Main characteristics of the washing station

Characteristics	Explanations
	The washing room can be arranged as a separate room, separated from other rooms by a solid partition, or as an adjacent room, separated from the steam room by a glass shutter. As for the relationship with other rooms, it is more convenient when you can get from the steam room to the wash room, and from there to the locker room/rest room.
	For maximum convenience, both cold and hot water are supplied to the washing room. Preparation hot water can be provided by a boiler installed in or outside the washing room, a sauna stove or other possible methods. Directly for washing in the room in question, either a shower tray is organized, or a full-fledged compact shower cabin is installed. If desired, you can drain water to 2-3 shower heads or install additional elements, for example, a tipping container with water (dousing bucket). If there is enough space, you can install a font with cool water in the washroom - an option that is especially relevant for cases where there is not enough space to organize a pool. In addition to the shower itself, you should install a bench in the washroom, hang a mirror, and attach hooks and shelves for bath accessories.
	The removal of water from the washing room can be organized in several ways: - by connecting to the central sewerage system, if possible; - into the pit, and from there along a pipe installed at an angle to drainage well, gutter, septic tank or other suitable place. To ensure effective water drainage, the floors in the washing room are arranged with a slight slope (on average 2 mm for every 1 m) in the direction of the drain hole. In accordance with current regulatory requirements, between the walls of the bathhouse and cesspools, septic tanks and other receiving containers for wastewater, a minimum distance of 5-10 meters must be maintained.
	For finishing lining of the washing room can be used various materials. The main thing is that they retain their original qualities for as long as possible under appropriate operating conditions.

The available finishing options for the washroom deserve special consideration. Information regarding the most commonly used materials can be found in the following table.

Table. Materials for finishing the washing room

Material	Basic information
	A popular type of finish, the use of which allows you to withstand the interior bath rooms in the same style. It is important to remember the fact that wood and moisture are hardly the best friends: in conditions high humidity the material swells quite quickly, rots and generally loses its operational and aesthetic properties. In view of this, it is reasonable to resort to the use of wood as a finish for a washroom only if a closed shower stall is installed in the room in question, which helps to minimize the contact of the finish and moisture. In this case, wood elements must be treated with antiseptic agents and special impregnations that increase the moisture-resistant properties of the material.
	Listed materials the best way Suitable for use in sauna washroom conditions. The owner has the right to choose the size, color, pattern and other external characteristics of the finishing at his own discretion. It is only important that the surface of the cladding is not slippery, and that a special mixture is used to grout the joints between individual elements to prevent the development of mold. Helpful advice! To make visiting the bathhouse washroom as safe as possible, it is recommended to lay a rubber mat or a wooden pallet on the floor lined with the proposed materials.
	Finishing based on polyvinyl chloride perfectly tolerates contact with moisture. At the same time, the material is not resistant to intense heat, which is why such panels should not be used for cladding ceilings and walls adjacent to the steam room. PVC panels are extremely easy to install, come in a wide variety of colors, are easy to clean, do not deteriorate when exposed to moisture, are sold at a relatively low cost, but are not durable and environmentally friendly.
	The use of this moisture-resistant material allows you to create truly unique and extraordinary interior compositions. Along with the, natural stone Many bathhouse owners do not like it because of the “coldness” of the surface.

To Decoration Materials maintained their original characteristics for as long as possible; effective ventilation should be organized in the washing room. As a rule, mechanical (forced) air exchange is provided, for which purpose a vent(duct) with electric fan. If there is enough opportunity to ventilate the washing room natural ventilation, to ensure air exchange, a small adjustable window is installed closer to the ceiling.

Prices for bath fans

bath fans

Video - Washing room in the bathhouse

Useful information about other important areas of the bathhouse

The layout of a 4x5 m bathhouse is not limited to just a steam room and a washing room. Even on such a relatively modest area, you can arrange a number of additional rooms, the presence of which will make using the bathhouse as convenient as possible. Information about the “minimum set” is given in the following table.

Table. Important additional rooms of the bathhouse

Room	Description and important information
	At the same time it can serve as a locker room and dressing room. Here you can also equip a place for storing firewood. Standard equipment for the rest room: table and chairs or sofa/chairs. If necessary, a TV and stereo system are also installed here. Each visitor to the rest room should have at least 2-3 m2 of free space. In general, this indicator increases to the maximum possible and is limited, firstly, by the personal preferences and needs of the owner, and secondly, by the area of ​​the bathhouse.
	If desired, the toilet can be installed in the washing room, but it is more convenient when a separate room is allocated for this. This does not require a lot of space: the recommended area of ​​this room is about 1.5-2 m2.
	The presence of a vestibule in the bathhouse will allow you to use it comfortably even in the cold season. The main purpose of this room is to separate the cold street and warm bath air. If there is no vestibule, using the steam room in cold weather will lead to the formation of condensation, which, having frozen on the door, simply will not allow the door to be opened in the future until it warms up. It is enough to allocate 1-1.5 m2 of space for the vestibule.

Video – Rest room in the bathhouse

Options for the internal layout of a 4x5 m bath: the best projects

The procedure for designing such elements as the foundation, wall construction material, roof characteristics, etc. determined by the characteristics of a particular situation and remains primarily at the discretion of the owner. You are also invited to familiarize yourself with the most popular and good options internal planning of the bath space 4x5 m with separate steam room and wash room.

The so-called “minimum set”.

The bathhouse consists of one floor and has dimensions of 4x5 m. There is no vestibule/anteroom, which makes the use of such a bathhouse possible only in warm weather (the reasons were described earlier). The entrance to the building leads to a fairly spacious room rest area measuring 2.85 x 4 m. It is proposed to install a table and a corner sofa or benches here. If desired, the room can be equipped with a TV and related equipment. From the rest room you can get into a wash room measuring 1.8 x 2 m, equipped with a shower, toilet and sink. The door from the washing room leads to a steam room measuring 2x2.1 m with a stove occupying 1 m2.

Kit interior spaces remains similar to the previous option, but a quite spacious terrace appears. The proposed dimensions are 1.5 x 4 m. If desired, the terrace can be glazed to create a veranda. Often, an additional seating area is organized on the terraces/veranda, or even a barbecue oven is installed, if free space allows.

The entrance from the terrace leads to a recreation room measuring 2x3.5 m. Recommendations for equipping this room are similar to the previous and all subsequent projects. Inner door from the rest room it leads to the shower room (1.5x2 m), from there to the steam room (2x2 m). Thus, even the presence of a terrace made it possible to correctly fit all the necessary premises into the available space.

In this project, a small dressing room with dimensions of 1.1 x 1.7 m appears. The presence of this room will allow you to comfortably operate the bathhouse in cold weather. It is also proposed to store firewood here.

The exit from the dressing room leads to a small corridor, and from there to the rest room. The latter is connected by a door to the washing compartment, and it is connected to the steam room. Recommendations regarding dimensions and interior design each room is shown in the diagram. You can take it as a basis, changing the necessary parameters at your discretion, or implement an identical project - ready sauna, despite its relatively modest dimensions, it will be very convenient.

Bathhouse 4x5 m, complemented by a vestibule and a bathroom

In this project, in addition to the main premises, there was a vestibule and a bathroom separated from the washing room, which is very convenient.

Important! In the example presented, the structure has dimensions of 5x5 m. To fit it into a space of 4x5 m, you will have to sacrifice some area of ​​the selected premises. It is most advisable to do this through a steam room and a relaxation room.

The door from the vestibule leads to the rest room, from where you can go to the bathroom or wash room. The washing room is connected by a door to the steam room. The project is one of the most successful and popular.

The presence of an attic tier allows you to use the space construction site with maximum benefit and efficiency.

Additionally, it is recommended that the building be equipped with a porch measuring 1.5 x 2.5 m. If desired, instead of a porch, you can make a vestibule, which will allow you to use the bathhouse throughout the year. On attic floor It is proposed to equip the bedroom. If desired, the space can be divided into a place for sleeping and a relaxation room, or you can make a billiard room here.

Video - 4x5 sauna plan, washing and steam room separately

if you have Vacation home or a summer house, then a weekend spent in nature will be memorable for all family members. Can you really call a vacation good if it doesn’t include a bathhouse? From this article you will learn the subtleties and problems when building a 4 by 5 by 4 by 5 bathhouse with your own hands.

Bathhouse project 4 by 5

If you do not want to experience inconvenience while in the bathhouse, then you should think carefully about the layout of your building. The layout of the 5 by 5 by 4 bathhouse provides accommodation for no more than 3-4 people.

Advice! In order for the layout of the building to fully suit you, you must think through everything down to the smallest detail, while not forgetting to take into account the aesthetically pleasing appearance of the building.

A correctly drawn up bathhouse design will allow you not only to spend time comfortably in this building, but also to perform all bathing procedures in it. It will also provide the opportunity to place all the necessary equipment inside the room..

Developing a bathhouse project is not a very simple task. Experience, accuracy and professionalism in this matter is very important. However, by using the services of professionals, you will come to unnecessary expenses, it is quite possible to do everything yourself.

If funds allow, then you can order any project for your building from specialized companies, even if you are planning a 5 by 4 5 bathhouse. Professionals in their field will help you draw up a project, taking into account your requirements and wishes.

Bathhouse 5 by 4, close to ideal

The future owner of a bathhouse must remember that in order to carry out construction work to equip this building, the most important thing is correct execution all stages.

Advice! You can build a bathhouse yourself, but the safety instructions must be followed in full. This will not only allow you to build the structure correctly, but also avoid injury in the process.

Here are some tips on how to build a bathhouse from 5 by 5 by 4 timber.

So, where to start construction:

1. try again initial stage Make the construction phase as easy as possible, that is, choose a more convenient and inexpensive type of foundation, depending on the type of soil on your site;
2. taking into account your financial opportunities, you must determine what material you will use to build the walls of your building. The price of building materials that can be used in construction work is important, but you must also choose exactly the material with which you can build a bathhouse yourself;

1. after you, together with your family members, decide what size you want to build a room for bath procedures on your site, decide immediately whether you will install a bath or shower in it;

Note! I would like to warn you right away that when self-construction wooden structure, you must invite at least one professional specialist - a carpenter - to your team.

So, as soon as a professional in his field manages to carry out cutting “in the paw” or “in the cloud”.

• Another problem when building a bathhouse can be choosing a suitable location for this task. When planning to place a bathhouse complex on your site, you must first ensure that the bathhouse is not adjacent to a residential building;
• Construction on the site must also be carried out taking into account its topography. So, for example, if you have one on your site, since in this way you can ensure natural water flow;

• if you do not plan to fail, then make sure that the drainage hole is not located in close proximity to a source of drinking water;
• At the same time, you must also take into account the interests of your neighbors land plot, so that your actions cannot cause them inconvenience;
• if you want to build a structure for taking “black” bath procedures, then its distance from the rest of the buildings on your site should not be closer than 12-14 m;
• you must also take into account the direction of the wind so that during heating, sparks cannot fall on the buildings adjacent to the bathhouse complex;
• The requirements for the location of the bathhouse “in white” are not so strict, so if you are planning to build just that, then you can do this at a distance of no more than 5-6 m from other buildings on your site.

The bath complex can be combined with summer kitchen, if you have it separately on the site. And this option is more preferable.

When a 4 by 5 by 5 bathhouse is built independently, you must take into account a lot more various nuances. So, for example, if you want the rays of the sun to enter your building, creating a cozy and soft lighting, then you will have to place the windows in it in the southwest or west.

It is best to build a building with such small dimensions with a veranda or terrace, on which in the warm season you can relax in the evenings with the whole family or a small group of friends. The ideal option for locating a complex for taking water procedures is to place it near a river or pond; if you do not have such an opportunity, then place a pool next to this complex, you can plunge into it after visiting the steam room.

Conclusion

Now you know what nuances you should consider before starting to practice self-construction complex for taking water procedures ().

More detailed information You can learn about this topic from the video in this article.