Coffee table cannot be called essential furniture, but it occupies an important place in the arrangement of a living room or bedroom. Modern tables are endowed with a lot of functions, representing a storage system not only for the press, but also for other useful things. Many models are equipped with spacious drawers and compartments, a transforming system, turning into an oversized dinner table. Among other things, the coffee table acts as a significant decorative element that successfully complements stylish design. It’s quite possible to make such a thing with your own hands if you apply some imagination and patience, and our article will provide interesting ideas for designing a coffee table at home.

Materials for production

In the manufacture of modern coffee tables, many different types are used. different materials. Unlike previous times, when standard rectangular structures were stamped from MDF, today's models surprise with their diversity. One of the expensive options are wooden tables made from natural solid wood. Such a thing will decorate any interior and will always look chic and respectable. The designs come in a wide variety - from strict, rough tables to Scandinavian style to classic ones, decorated with forging or carved decorations.

Since wood is quite expensive, they help replace it chipboards and MDF. If we talk about durability, they are, of course, inferior to wooden ones, but they look no worse. Design tricks allow you to compensate for the simplicity of the material, for example, transformable tabletops, built-in sockets, etc.

Metal also takes part in the design of coffee tables. Frames are formed from metal pipes, which are then supplemented with countertops made of other materials. Graceful curls look very beautiful forged elements with glass table tops. Sometimes you can find designer designs in which the table consists entirely of metal.

In modern furniture production can be found more and more often glass objects interiors that bring some lightness and airiness to the atmosphere. Products are made of heavy-duty tempered glass, resistant to various kinds influences, so you don’t have to be afraid that such a piece of furniture will break or become deformed under the influence high temperatures. In some models, only the surface of the tabletop is covered with glass.

Plastic is used much less frequently, as it is not very durable, but has greater color palette and low cost. Most often it is found as components of a wooden or metal structure.

IN homemade original coffee tables, the choice of material increases significantly, since, in addition to traditional materials, various improvised means are used.

How to make a coffee table: beautiful ideas

To make coffee tables with your own hands, plywood is most often used, which is relatively inexpensive and easy to process. You can also use various available materials and build the most bizarre designs. More complex parts, such as curly handles, legs, wheels, fittings and other decorative elements, can be purchased at a furniture store.

Modern style plywood coffee table

Making such an original coffee table will not require much time, but the product will take its rightful place in any interior with a touch of minimalism. To work, you need to purchase a sheet of plywood, three legs with fasteners, thick thread, a pencil, a tape measure, a jigsaw and paint (preferably white or black).

So, the first thing you need to do is cut out the tabletop. On back side sheet, select a point that will be the center, drive in a small nail. Cut a piece of thread the length of the radius of the future table. We attach one end of it to a hammered nail, and to the other we tie a pencil and, pulling the structure, draw round shape countertops. Next, you can dream up and give the canvas a more original shape. It is noteworthy that to make such a table you will not need any drawings or measurements at all. We cut out the drawn shape of the tabletop using a jigsaw, sand it and paint it. When the structure is completely dry, we attach the legs. The table is ready.

Coffee table made from pallets

This original design fits perfectly into many styling. It will most successfully complement a daring loft or natural eco-style. It is not difficult to design such an exclusive table: for work you need to get a tray, metal legs or wheels (at your discretion). You also cannot do without screws and a screwdriver, a saw, paint or varnish with a brush.

Step by step, all work on constructing the table will take place in the following order:

1. Mark the dimensions of the table on the pallet and saw off the excess part.
2. We take planks from the leftovers and cover the gaps in the main structure with them to create a continuous surface, fixing them with self-tapping screws.
3. We turn over and form five transverse strips: two on the sides (the legs will be attached to them) and one in the center for stability.
4. We mount the supports and open the structure with varnish or paint.

Tire coffee table

An old worn-out tire can be a great base for creating a beautiful home coffee table. Additionally, you need to prepare the plywood. Before you begin construction, you must thoroughly wash and dry the tire. Next, you need to measure the diameter of the tire and cut two circles from plywood: one - the tabletop - should correspond to the diameter of the tire, and the other - the base - should be a few centimeters smaller. You can immediately attach legs, wheels to the base, or leave it without supports at your discretion. We attach round sheets of plywood to the tire using self-tapping screws or sit them on construction glue - the base is ready.

Next, we choose one of two methods: we wrap the rope either completely around the structure, or only at the sides. In the first option, you need to think about how to treat the countertop - perhaps paint it or coat it with a shiny varnish.

You should start wrapping from the center: fix the end of the rope with a self-tapping screw or a glue gun and begin the movement of winding circles, gradually moving to the sides. There is no point in wrapping the base, unless you decide to make the table half two-color. At the end of the winding, the entire structure should be coated with transparent varnish to extend its service life.

Coffee table made from drawers

If you have any lying around on your farm wooden boxes from under vegetables - do not rush to throw them away. Just four of these containers can turn into a beautiful and useful part of your living room interior. If you don’t have drawers, the hardest part of making a table will be getting them. Then everything is simple: the boxes need to be sanded, painted and folded, as shown in the photo. We use a sheet of plywood, which must be screwed to the bottom side of the structure so that it does not fall apart. So our coffee table is ready. The advantage of this design will be the organization of spacious storage areas for various magazines, books and other things.

Coffee table for travel lovers

Nowadays, traveling around different countries became available to many. But there is a special category of people who simply cannot live without constant travel to remote corners. They are the ones who will surely like a coffee table reminiscent of certain pleasant voyages. Any old suitcase with hard walls that is not suitable for its intended purpose will be suitable for production. You will also need a sheet of thick plywood, a screwdriver with screws, paint and, if desired, legs or wheels.

We cut out two sheets of plywood with an area equal to the base of the suitcase, attach them with inside to the base and lid. Screw on the legs or wheels. Next you need to decorate the table - for this they use different ways. One of simple options- paint it in White color, and when the structure is dry, use sandpaper to make abrasions indicating the antiquity of the item. This product will suitably decorate a living room in a shabby chic style. The black color of such a table will harmoniously fit into a loft living room, and the decoration using the decoupage technique will become a real masterpiece of Provencal design.

Coffee table made of driftwood

The uniqueness of furniture made from stumps and driftwood lies in its uniqueness - what is created by nature itself does not have similar patterns and textures. Such products always attract the eye with their curves and weaves. In addition, get raw material not so difficult - it can be found in the forest, on the shore of a pond. The snag needs to be washed, cleared of bark, and rotten waste removed. Next, you need to make adjustments, level the shape to fit the tabletop and base, and let the workpiece dry thoroughly (if there are large holes in the wood, it can be puttied).

The dried driftwood is carefully sanded, covered with stain (you can choose the shade you like best) and varnish. The base is ready. The table top can be attached using construction adhesive or self-tapping screws (depending on what it is made of). Nowadays, glass tabletops are very popular, through which winding wooden branches are clearly visible.

DIY coffee tables – photo ideas

We looked at only a few options for making coffee tables with our own hands. Much more information and photos finished products our gallery will provide you with a lot of information interesting ideas. Enjoy watching!

Coffee tables are as relevant today as they were many years ago; they can be purchased separately from an upholstered set or as a set, however, like all other pieces of furniture, this one has a high cost, despite its small size. That is why you can make it yourself.

Coffee tables have relatively high prices in furniture stores, however, unlike other pieces of furniture, they are quite easy to make yourself.

Preparatory work

To do it yourself wooden table, you need to stock up on the following tools and materials:

• solid pine;
• varnish on water based;
• white spirit;
• acrylic paint;
• brush;
• self-tapping screws;
• electric jigsaw;
• screwdriver;
• radial sander;
• milling cutter;
• drill.

As for solid pine, you need to purchase material whose thickness is 25 mm. The dimensions of the workpiece for this table are 1500x500 mm. This model does not require separate legs. In order to cover the table, you will need 300 g of water-based varnish. Acrylic paint must be purchased with a shine, which will give the product a tone; about 100 g of this product will be spent. To apply the composition, you need to purchase a brush or take the one that is available, it is worth considering only that it will have to be disposed of after the work, since it will the glitter will be impossible to get rid of.

Tools for making a coffee table.

The coffee table should be assembled using self-tapping screws of two sizes: 4x60 and 4x40 mm. To be used for wood processing electric jigsaw, which comes with a set of files designed for clean cutting of wood. It is preferable to use a self-clamping chuck; it is more convenient for the master when carrying out work. In any case, it should be possible to install a drill with a diameter of 10 mm in the chuck. The radial grinder can be replaced with a regular screwdriver, which has an appropriate attachment.

Related article: Selecting the color of an interior door

From hand router You can also refuse in favor of a traditional plane, since not every craftsman has the first version of the tool. It will be necessary to remove more impressive chamfers.

Drills should have the following sizes: 10 and 5 mm, the first option should be used instead of a separate countersink. A set of bits with an extension cord will also come in handy.

When cutting the material, you don’t have to try to calculate the size of the radius; for this you can use a traditional steel hula hoop as a template.

Preparing for the assembly process

When making a coffee table, you have to perform two stages of product processing: preliminary and finishing. The first stage includes cutting, beveling and sanding.

You need to remove the chamfer by approximately 5 mm; it looks aesthetically pleasing and will not “eat up” the thickness of the countertop externally. Even before covering the elements with tone, grinding should be done in three approaches in the area of ​​the ends.

Drawing of a coffee table.

Such work must be carried out using the technology below.

After you have sanded the sections, you should cover them with a layer of varnish.

You must be prepared for the wood structure to become brittle under the coating. After drying, sanding and varnishing should be done again, this should be done until a smooth cut can be achieved. In this case, care must be taken not to damage the plane.

Wooden table installation technology

When making a coffee table, before you start gluing the elements together, you need to prime the joints with PVA, which can be replaced with wood glue, then the surface should be left to dry. The planks with legs must be mated with self-tapping screws with dimensions 4x40, while when fastening to the tabletop, fasteners with dimensions 4x60 should be used.

The coffee table should not have a resinous surface; in order to get rid of it, you should use white spirit and a large number of rags. It is advisable to carry out such work in an open space. Otherwise, the smell will remain in the apartment for a long time.

Related article: Electrical wiring in a wooden house

The varnish must be mixed with shiny paint and covered the surface of the table. You can experiment a little with the remaining acrylic by drawing patterns under the final layer of varnish; they will not be very noticeable and intrusive, you can only see them in reflected light.

Wooden coffee table with legs

Coffee table assembly diagram.

The coffee table can be made by analogy with the one described above, however, it can also have legs in its design. To do this, you will need to use a workpiece from an array of the required size. It is necessary to saw off material from the element on four sides (not two). The size of the tabletop of such a table can be 950x650 mm. The array in this case should have a thickness in the range of 35-40 mm. The blank for this table will be a material with dimensions of 1280x980 mm. The legs can be ready-made balusters, which can be purchased from the construction department; their top should be square, the side of which can be limited to 60 mm. The blanks for the legs can be sawed off so that the table is of the required height.

If you saw off the table top radially from 4 sides, then instead of the elements that in the first case served as legs, you will be able to get a finished table base in four parts. To fasten them, they must be tightened with confirmats with dimensions of 5x90 mm. In this case, the blanks should form the shape of a rectangle, which should be screwed to the tabletop using corners. Do not forget that the elements of the “box” part must be sawn off to length; this will allow you to obtain a structure of the correct shape after assembling the table.

When installing the legs, you should use self-tapping screws, mounting them from the inside. The reliability of the base box will be achieved by the fact that the structure of the wood on the long elements is horizontal.

This way the model will have legs. If desired, such a table can be turned into a dining table at the installation stage; to do this, it will be necessary to cut the legs, leaving a more impressive length. When making cuts using a jigsaw, you can make curly movements.

The living room will look empty if there is no coffee table made of chipboard or other suitable material. If you wish and have free time, you can do coffee table with your own hands. The recommendations offered below, as well as drawings of coffee tables, will help with this. If you are planning to make a coffee table with your own hands, then you can easily find suitable drawings here.

Table made of drawers Metal table Table transformer

To make a coffee table with your own hands, you will need:

• hardboard or plywood, if you are going to create a coffee table from plywood with your own hands or a transformable coffee table;
• boards;
• tape measure to help you determine the size;
• hammer;
• grinding machine;
• 3-4 legs. If your plans include a round coffee table with your own hands, then you should take 3 legs;
• hacksaw for woodworking;
• drill and set of drills;
• screws, self-tapping screws, finishing nails;
• putty and high-quality glue;
• paint and primer;
• sandpaper.

You may need additional tools, it all depends on what kind of coffee table you plan to make.

How to make a coffee table?

You can create a tea table with your own hands, following the diagram:

1. Cut the ends of the boards at an angle of 45º, from wood material or laminated chipboard, cut out elements whose length will be equal to the length of the blanks made.
2. Place the pieces in the center, carefully aligning the ends.
3. Take measurements to determine the distance separating the end bars. Using the obtained parameters, cut out a couple of blanks that will be used as lower supports. Fasten them with self-tapping screws. Screw fasteners into each longitudinal rail to give the table strength and stability.
4. Drill a couple of holes at the ends of the support crossbars, which will be useful for combining the structure with other elements. If you don't have enough experience with the tool, practice using scrap wood scraps.
5. Place the workpieces on the sides, secure with quick clamping device, called a clamp. Craftsmen who create a coffee table from chipboard or from soft wood (solid pine) do this: they place board scraps under the supports of the fasteners. Due to this, they avoid traces remaining on the surface.
6. Firmly fix the outer beams to the base, screw the screws into the pre-made holes.
7. Take measurements to find out the width of the base made (this is necessary in order to understand how long the workpiece for the end part should be). Experts say: “I assemble the item with millimeter precision, because I cut with a small margin in length, and carefully grind off the extra centimeters.” When making a wooden coffee table, take this advice.
8. Wet the end parts with water, apply adhesive, and assemble the individual parts. Tighten it with a belt. This will allow you to fasten the structure together and fix it in a certain position. For a stronger bond, use finishing nails.
9. Sand the assembled coffee table with your own hands, removing any rough edges. The gaps formed at the seams must be filled with putty.
10. Color the assembled, DIY coffee table using a ready-made project.
11. Place on the lower crossbars of future coffee tables mounting plates, which will later be useful for making the lower part. Make holes and screw the legs into them.

Making a transformable coffee table with your own hands is a little more difficult, however, the assembly diagram for the coffee table is approximately identical.

A transforming table, made with your own hands from scrap materials, will complement the room and make it more functional. A transformer for the living room is optimal for the room.

1 2 3

As you can see, making a wooden coffee table with your own hands is not as difficult as it might seem at first glance.

DIY coffee table on wheels

1 2 3

If you wish, you can assemble a table from chipboard with your own hands on wheels. A folding coffee table is very convenient to use, as it allows you to move furniture from place to place without extra effort. Making an original coffee table with your own hands is quite a feasible task. Make a dining option according to the algorithm presented above, and then attach wheels to the legs. You can remove this part from an old cart and equip it with a dining or stylish folding table from magazine boards or other accessories.

To secure devices at home, use high-quality screws. Attach the wheels to the base of the structure, making sure that they do not peek out from underneath. It is unacceptable that the base makes it difficult to move homemade table. Adjust the location that the coffee table will occupy: low or high level supports It is important that the wheels rotate without difficulty, allowing you to move the table.

DIY glass coffee table

Tables with glass are very presentable and practical. The transparent table top matches perfectly with various types materials. To make a coffee table from wood with glass table top, decide what thickness the glass should be and choose the appropriate cutting method.

To make a glass coffee table with your own hands, you will need furniture board, in which a hole is cut the desired shape. Next, you need to fix the pre-cut glass in it (for this purpose it is most convenient to use a glazing bead). If you have a glass cutter, it is better to use this particular device, which ensures high-quality work.

There are two main types of glass cutters: roller and diamond types. Devices of the first type are suitable for working on a thinner glass plate, whose thickness is no more than 4 cm. The tool includes from 1 to 6 rollers. There must be a cutting line. Experts say that models with an oil reservoir have the best properties. They are great for both professionals and beginners.

Prepare the glass thoroughly before cutting, that is, wash it and degrease it. If you are dealing with a relief surface, then to work on it diamond glass cutter It won't do at all. Cut such a plate by turning it over smooth side to yourself. When cutting with a roller glass cutter, make sure that the line is completely covered with turpentine liquid.

After the glass has been cut, fix it using special glue. If there is no adhesive available, you can use suction cups to make furniture in the Provence style with your own hands, which are attached first to the leg and then to the glass.

If desired, you can decorate the table with your own hands with a variety of decorative elements, which will make it even more presentable and modern. View photos or videos on our website to understand how best to decorate a table on wheels. If you don’t understand any details, ask experts how to make a coffee table with your own hands.

A table is the second item after a stool that every beginning amateur furniture maker should be able to do. The table can be created from different materials and have unique characteristics. An excellent intention for you would be the desire to make your own product from wood.

A table made of wood is quite easy to create with your own hands; having minimal skills in working with carpentry tools is enough. And the cost of the material will be significantly less than for a table using metal, glass or plastic.

A piece of furniture made with your own hands will most accurately correspond to the wishes of the happy owner, and will be incomparably more pleasing to the eye than what was purchased. And most importantly, when creating a table with your own hands, you acquire important skills in working with the material, which will make the restoration of operational defects much easier.

What can you make a good table from?

Especially beautiful tabletop can be made from cheap, non-grade pine boards, knotty and twisted (without falling knots, rot, fungus, wormholes), which, when well processed, give a wonderful pattern, to achieve which when working with expensive wood it is necessary to put in much more expense and effort.

When choosing a material, it is important to take care of the strength of the future product. To do this, you should pay attention to the density of the wood.

Soft wood (spruce, pine, chestnut, dogwood) is easily damaged during use, which negatively affects the durability of the table. But scratches and dents can be hidden, although the restoration process will be quite frequent.

Hardwoods (beech, ash, maple, oak, walnut, fruit trees, elm) are quite difficult to process on your own. And you may have to look for experts to work with them. But you will ensure the durability of the product.

External characteristics

It is very important to determine for yourself in advance appearance your future product. Basic rule good table it is considered if the design fits well into the space allocated for it and leaves a lot of free space for those sitting.

It is also important to consider that a table with a rectangular tabletop will accommodate fewer people than a table with a round or oval shape with the same area. And it would be more expedient to make a table for guests in a folding version, which is folded out for big holidays, but in everyday life is folded. Also, such a folding table will be convenient in the utility room.

Most often you need to choose a kitchen table. It should be roomy and pleasing to the eye to facilitate the process of working with it. But it should not interfere with movement in the room and in no way interfere with the process of culinary creativity.

Based on this, it is absolutely clear that the size of the table is selected depending on the area of ​​the room. Also for kitchen table Soft wood cannot be used due to its use in “extreme” conditions.

Choosing the external characteristics of a product is a responsible process, therefore, before starting to personally create a table for a summer house, it is extremely necessary to thoughtfully assess the needs for which this table is being made.

Transferring an idea to paper

When creating a design that is the fruit of your imagination, you will have to develop the diagram and drawings of your table yourself. Why are there so many electronic programs?

After a thorough development process, it is extremely important to transfer the resulting result to paper. For fast and high-quality work, it is very important to use this manual constantly.

Creative process

Preparation of drawings is the last preparatory stage. Next, you can begin the most important part of the work - manufacturing the parts. Do-it-yourself wooden tables are much easier to create if the drawings and diagrams are as informative as possible. This reduces the likelihood of errors to a minimum.

You can actually do it yourself like this: desk, and magazine or children's version. With a certain skill it is possible to create and computer desk. And also lunch or country model. Each of the options is quite easy to implement.

The canvas for the tabletop and the boards with beams from which the remaining parts will be formed are processed with the available tool or, at worst, with coarse sandpaper to remove any defects present in the form of unevenness and protruding knots.

The boards are sanded on all sides, including the side edges and corners. If you are creating a canvas from wood cuts, you need to make sure that they are sufficiently dry, and also repair small cracks discovered after a visual inspection. And it’s better to tongue and groove them. To get more reliable adhesion of the canvas and save time on assembling elements.

Transfer the diagram to the finished canvas. The main elements are cut out with a jigsaw and, if necessary, the sections are polished. Speakers supporting elements trimmed to approximately 3 centimeters. Horizontal cuts are made on both sides of the supports (legs).

The blanks are coated with a preparation that prevents the entry of moisture and pests, and only after final drying is it possible to resume the process of creating a table with your own hands.

Putting the details together

After making all necessary details you can begin the ritual. Namely, to put together the desired masterpiece. And it could be like round table, as well as any other selected product.

First you need to collect supporting structure using screws and glue (first, thin channels are drilled with a drill to the length of the screw, otherwise there is a possibility of the part splitting). Galvanized screws can be used for connections, as they do not rust, and this is very important for wood products. Or wood glue.

According to the basic rules, the length and width of the frame should be 30-25 cm less than the tabletop.

Additional boards need to be attached to the sides to add rigidity and to hide the place where the legs are attached. Cut chamfers where the legs are installed.

Then the table leg is secured in place with clamps, and holes for the bolts are drilled in the frame. Place the supporting elements in place and secure them with stoppers. Reinforce the structure with wood glue. Then install the tabletop in place for which furniture corners are used. At the very end, all visible screws are hidden with plugs matching the color of the wood.

The final stage. Finishing

A photo of the completed table can be seen below. Achieving this result is surprisingly easy. If desired, you can round either only the corners or the entire end, depending on the type of table. It will be nice to make chamfers on the edges of the tabletop.

Irregularities in the entire structure are sanded down, and mistakes made are hidden using putty. To extend service life with your own hands assembled table it is necessary to cover it with several layers of varnish or stain.

Thus, do it yourself beautiful table made of wood is a fairly simple leisure activity. And easy to do. The guarantee of obtaining a high-quality, ideal in dimensions and aesthetic result according to your drawings is: strict adherence to the instructions, error-free execution and carefully selected material. And the resulting table will harmoniously fit into the exterior.

Photos of tables with your own hands

Coffee table - at first glance, not the most necessary furniture. Therefore, its acquisition is endlessly postponed. But it is precisely such items that make the interior truly cozy and comfortable. Therefore, we are sharing ideas that will tell you how to make a stylish coffee table with your own hands and not go broke.

1. Democratic and accessible

To make such a table you will need a pair of metal or plastic boxes and two large boards. Don't forget to fasten the structure securely.

2. For the smartest

Books with beautiful covers and small glass for the table top are all the materials for such a coffee table. The books must be glued together, and the glass can be fixed to them using silicone glue, which becomes transparent after drying.

3. Ordered chaos

A coffee table made of flat elements fastened together in a chaotic manner is an idea that is easy to implement. Wooden saw cuts, parts of boards, big books.

4. Industrial style

A reel for industrial cables is a thing that cannot be found on every corner. But if you are lucky enough to become the owner of this item, it can be used to make an excellent coffee table.

5. Table for car enthusiasts

Coffee table from car tire will last for many years. But it is advisable to use the tire without damage. All that remains is to paint it, secure the tabletop and legs.

6. Wooden table is almost free

Ordinary pallets, which can be purchased for pennies, are an excellent material for making furniture. A little imagination, and the wooden coffee table is ready.

7. Second life for old boxes

Another way to become an owner coffee table from natural wood- this is to use old boxes as material for its manufacture. Four large drawers fastened together form a stylish table.

8. Extravagant chic

A coffee table with asymmetrical legs looks especially original, but at the same time luxurious. The tabletop is made of a thick board or a wooden cut.

9. From the dacha to the living room

Big wooden barrel Easily converts into a coffee table. It must be cut into two parts, and then the table top and legs must be attached to one of them.

10. Spacious and functional table out of the box

A utility box made of plastic or wood can also be used as a coffee table. To make the table mobile, you can attach small wheels to its bottom.

11. Warm table

Old radiator heating – solid foundation, which will help you make a coffee table with your own hands. You just need to paint it in desired color, attach the wheels and place thick glass on top.

12. From the interior door

Interior door, which has served its useful life, becomes material for making a coffee table with your own hands. It must be cut into several parts and fastened together.

13. If it’s a pity to quit and it’s hard to carry

An old suitcase can become an original tabletop for a coffee table. You just need to attach the legs to it.

14. Brutal elegance

Available option making legs for a coffee table - these are ordinary plastic or metal pipes, connected to each other by fittings. This furniture will fit perfectly into a loft-style interior.

15. From ordinary wooden beams

Wooden beam, folded in a checkerboard pattern, will become a tabletop for a homemade coffee table. The legs can be made from thick metal wire.

To make the interior look harmonious, you need to take care not only of the details, but also of the decoration of the room. Continuing the topic -