H1 halogen lamps were originally used for headlights, but today they are most often used to equip low beam and fog lights... Today manufacturers offer wide choose H1 lamps, which are characterized by increased luminous flux... Thanks to good brightness, it was possible to achieve increase illumination distance. Standard power such lamps are 55 watts.
You can buy halogen lamps (base H1) on our website. We offer products from world famous manufacturers in various price ranges.
On the page: 30 25 50 75 100
Sorting: By default Name (A -> Z) Name (Z -> A) Price (ascending) Price (descending) Model (A -> Z) Model (Z -> A)
These halogen lamps are designed to be mounted in the optics of the machine with the H1 base. The LongLife EcoVision range is designed for drivers looking to reduce the cost of frequent headlight changes. They last 4 times longer than standard light sources. Their performance period is equivalent to 100,000 km of car mileage. In order to achieve symmetrical light output in both headlights, it is recommended to change two lamps at once. The devices can be installed in cars with a 12V power supply, it can be low beam, high beam or fog lights head optics. Oso ..
The lamps, produced by the German company Philips, will allow the driver to better control the situation on the road, no matter what conditions he is driving. The devices shine with a rich white light. The light from the fixtures is similar to that of standard xenon lamps. So, every driver who has an auto halogen base H1 can improve the headlights without re-equipping the optics and without spending a lot of money on gas-discharge lighting. Crystal Vision will also make your vehicle more visible on the road, which will increase the level of safety when traveling on the road at night. Especially..
Is the standard lamp in the optics of the machine of the H1 base burnt out? Change it to devices from the German manufacturer Philips of the Diamond Vision line. The peculiarity of this light device is that the lamps are able to distinguish your car from the main traffic flow with a powerful luminous flux. The lamps shine with a rich white light, which is as close as possible to xenon lighting. Its color temperature is 5000 K (natural light). With this lighting, the driver will be able to fully control traffic situation with the longest possible attention span. Devices can be adopted as head units ..
The set contains two lamps, which can ideally replace the out-of-service halogen equipment of a car with an H1 machine base. During the lamp it is as similar as possible to the xenon one. All obstacles, bumps and road markings can be seen much earlier. Philips H1 12258WHVB1 WhiteVision lamps are great for illuminating the road at night or in bad weather. White with a little yellow tint the light of the lamps perfectly penetrates the curtain of precipitation drops, illuminating the road. Philips lamps are not only safe on the road, but also a beautiful addition.
Catchy halogen light provided by the German professional manufacturer Philips. The lamp has up to 60% increased beam brightness for superior security. The source is no longer standard yellow light, and a whiter format, which is currently considered the most optimal for use on motorways. It is installed on the H1 mounting base, has a power of 55W. ..
Halogen bulbs last much longer standard lamp, up to 50% and the length of the light beam is increased by 20 meters. For increased road safety. Special characteristics of this model: For vehicles with H1 base; Self-installation is possible; No ignition unit needed; Improved filament; Durable glass flask; The lamp is capable of absorbing ultraviolet light; Resistance to temperature changes; Works with a voltage of 12V and a power of 55W. Not a high price. You can improve your stock lighting for this ..
This line is more durable and more durable. The strong glass of the bulb contains a filament and gas inside. The lamp does not lose power and brightness even over time. The light is white, can work at a voltage of 12V and a power of 55W. Features: Self-assembly; The service life is increased by 50%; The glow is similar to xenon; Not a high price; Lifetime warranty. Installed in the H1 base. You can replace the standard lighting with a halogen lamp and be satisfied, for this you need to buy a halo kit ..
Great offer for those who appreciate the right combination quality and cost of production - a set of Bosch halogen lamps with base type H1 of the Plus 90 model! Providing an increase in light output of up to 90%, halogen lamps occupy a leading position in this market segment. With standard voltage and power ratings, auto lamps are absolutely safe for use in cars. The type of base assumes the use of lamps in the near / high beam. ..
Unique offer from German company Bosch is a set of halogen lamps that gives a flawless white glow close to daylight. Features of a design: Halogen lamp with voltage and power of 12V / 55W makes energy consumption economical; The special XenonSilver bulb coating gives the effect of an intense crystal white glow; Filling the bulb with xenon increases the brightness effect. These qualities make the lamp in demand among those motorists who know a lot about the combination of price and quality. We offer to buy a reliable set of halogen lamps ..
Bosch Plus 90 halogen bulbs provide up to 90% more illumination on the road for maximum driving safety. Generates intense white light for a more comfortable ride, and the reduced stress on the driver's eyesight helps on long journeys. A longer beam of light provides more lighting options for faster response times. With a power of 12W and a voltage of 55V, halogen lamps are energy efficient. Also a plus is the exclusive design, which includes a silver plating on the tip of the lamas.
Lamps from a well-known German manufacturer, Philips, differ in many respects from ordinary halogen bulbs, and there are objective reasons for this. These light sources are able to emit much more bright light, which became even closer to the daytime. Note that quartz glass The lamp is durable enough to resist light vibration, shock or shock. And a special coating helps to avoid harm from ultraviolet radiation... The lamp shines with a bright white light with a slightly yellowish tint. There is a special bluish coating on the tip of the lamp bulb. What do they conclude ..
Philips H1 BlueVision Ultra halogen lamps are headlights or PTF lamps that provide white light on the track and bluish light on the reflector. The H1 BlueVision Ultra lamps use exclusive Gradient CoatingTM technology to achieve the effect of xenon lamps. This lamp model provides excellent visibility on the road at dusk and at night, ensuring less driver fatigue, confidence and safety on the road. Philips H1 BlueVision Ultra lamps have precise geometry, so in the dazzle zone of drivers of passing and oncoming vehicles ..
The halogen bulb from the German manufacturer Osram of the 64150 series belongs to the original products of the Original Line. The device is very simple to install, easily and securely attached and has the H1 format of the released base. Differs in stability of work, durability and reliability. Produces a yellowish light characterized by a standard temperature of 3200 Kelvin and a brightness of 2600 Lumens. It is installed on a 12V power supply system of the machine and differs in energy consumption up to 55W. ..
A warm white stream of light, which is as close to daylight as possible, is provided by the Cool Blue Intense halogen range, which is produced by the Osram corporation. Model 64150CBI has an H1 socket, plugs into a 12V power system and has a rated power consumption of 55W. A temperature in Kelvin of 4200 provides an incredibly bright and rich snow-white warm stream of light. The brightness increased to 20% increased the beam distance and improved visibility on the freeway. ..
A snow-white and incredibly catchy glow can be provided by the proposed set of halogen car lamps models 64150CBH Cool Blue Hyper, produced by German manufacturers Osram. The snow-white glow is provided due to the increased glow temperature by 5000 Kelvin, which is not typical for halogen. The device allows you to get the most close light to xenon and daylight format. It differs in power consumption of 55W and has an H1 base format. ..
On night trails, the 64150NBU bulbs can be the best source of bright and saturated light. Night breaker Unlimited, manufactured by the Osram Corporation. The lamps give out light saturation up to 110% more than the standard, providing a beam with a length of up to 40 plus meters. The springs are characterized by the issuance of a warm-white stream of 3400 Kelvin, which copes excellently with dark sections of the road. Has an H1 base and is installed on vehicles with 12V power supply. ..
The best visibility on night highways can be provided by the halogen package provided by Osram. The Night Breaker Plus 64150NBP range delivers an incredibly powerful beam, with 1550 lumens of brightness and 3500 Kelvin for a rich white warm beam. The product consumes 55W of machine energy and is put on a 12V power system. Light bulbs last incredibly long, as they were created from high-quality and sturdy materials. ..
The halogen bulb belonging to the Silverstar 2.0 release line of the 64150SV2 series is produced by the German manufacturer Osram. The device is the best element in the fight against dusk, since from the standard it provides up to 50% more brightness and saturation of light, as well as the length of its beam plus 20 meters. The device has an H1 base and a temperature of 3400 Kelvin, allowing for a yellowish light. It features 55W of power, up to 12V, and incredible durability not found in halogen products. ..
New atolamp model lamps Osram with base type HS1 H1 has a lot of advantages: The lamp is durable, you can safely use it during the day; Can work up to three times longer (compared to conventional lamps); Installed in headlight lamps; Suitable for installation in vehicles with transparent headlights; Looks stylish thanks to the silver-plated tip. Technical parameters: Rated power - 55 V; The used voltage is 12 W; Colour temperature- 3200 K; Increase in length luminous flux- 1550 Lumens. ..
High quality light bulb from Osram corporation, model 64150SUP belongs to the Super range and has distinctive features... The halogen lamp of this line provides 30% more saturated and bright light, differing up to 10 meters in an extended beam. The product is issued with a yellowish light at 3200 Kelvin, which is not scattered along the highway, and a brightness of 2600 Lumens + 30%. It is installed on a car with a 12V power supply and differs in energy consumption of only 55W. Produced under H1 base. ..
The original Osram halogen format bulb is a powerful light source. It is installed on cars with a 12V power supply system and differs in power by 100W. This lighting device is produced in the H1 base format and gives out a yellowish glow, since it has a color gamut temperature of 3200 Kelvin. Delivers a rich and powerful beam, characterized by a brightness of 2600 lumens. ..
The halogen model of the manufacturer Osram Allseason Offroad is the maximum illumination in incredibly difficult climatic situations. The product has a special coating on the flask, which, from yellowish light, makes it more saturated yellow at 3200 Kelvin. Such light is characterized by the ability to quickly and reliably cope with severe nebula, rainfall and other climatic factors. The halogen offers up to 30% better visibility, guaranteeing up to 10 meters more beam length. Has a power consumption of 55W and H1 base. ..
This is a standard bulb with an H1 base. It has a transparent bulb, the lamp itself emits ordinary light, but there is an improved characteristic: more quality materials used in the production of filaments, increase the life of the offered light bulb. Characteristic differences from other lamps: The bulb is made of special glass with a coating that absorbs the UV spectrum; Do not pose any danger to the plastic parts of the headlights; Used for installation in headlights; The nominal color temperature is 2900 K. All these advantages make M ..
Composition of a set of halogen lamps from MTF Halogen lamp sets from MTF in the Aurum series are produced for different types plinths. In this case, this series of devices applies to H1 type base / plinths. This type of lamp has a special type of coating called interference. This coating gives the lamps huge advantage, namely - excellent visibility of the path in a wide variety of driving conditions. Also, the glass is protected from harmful ultraviolet rays. Thus, the lamps not only protect themselves, but also protect the entire optics. Technical features of M .. halogen sets
MTF sets of halogen lamps from the best manufacturer The lamps in the MTF set are manufactured by the manufacturer in China. This fact says that MTF Argentum + 50% halogen lamps on the H1 base are of constant quality and will be able to give their owner excellent light. Since xenon devices are illegal in many countries, and therefore prohibited for use, this type of halogen lamps, with special xenon gas filling, can be a good alternative. The real possibilities of halogen MTF kits Since this type of lamp is ..
Halogen lamps in the MTF set - excellent lighting, high-quality tuning Halogen lamps, which are produced and developed by the mega world-famous company MTF (LightMagnesium), are distinguished by high quality indicators. These devices give excellent light, the level of which is as high as possible and close to daylight. The light beam is warm white. The color temperature is 3500 Kelvin. These lamps are distributed for further installation in machines with an H1 base. Technical descriptions of halogen lamps in a set from MTF The new series of Magnesium lamps is ..
Halogen lamp sets from MTF - the best means on lighting Differences between sets of halogen bulbs LightPlatinum, the release of which in active mode deals with the company MTF, are in many indicators. These bulbs correspond the highest level quality factor. But for all its popularity and high quality the price of the products is not too high, therefore it is quite affordable for the consumer circle. Technical descriptions of halogen lamps from MTF This type of lamp is designed for mounting in an H1 base. Color temperature readings are 3800 Kelvin. Bright rays of light pos.
Halogen lamps MTF - best production modernity Halogen lamps, which are distributed in special. sets are considered the best at the moment. It is they who are superior to those. indicators of halogen lamps of other models. Their superiority lies in many parameters. Halogens of this type, that is, MTF LightArgentum, have an increased light output... So they can give 80 more light. The light is unusually bright, but slightly yellowish, since the color temperature is 4000K. MTF Light - the purpose of the Argentum series Lamps are not fundamentally ..
Halogen lamps from MTF are leaders on all "fronts" Halogen lamps LightTitanium in special set from MTF firm are considered and are leaders. The reason for this was not anyhow the quality of the products and their originality. The components of the lamps, namely the original material from which they are made, are highly durable. Also, glass is distinguished by its dense structure. Note that it has a reliable coating that helps to absorb most of the ultraviolet radiation. This approach has a beneficial effect not only on the lighting itself.
Halogen lamps from the MTF company - guaranteed quality products Halogen lamps LightVanadium in the new special. a set from the MTF company will make lighting much more efficient. So the lamps emit a white glow with a slightly bluish tint. The main advantage of lamps is their robust structure. The glass of the lamps is durable and in addition it has protective covering, which allows you to take in most of ultraviolet rays coming from outside. Likewise, the optics are safe, since the lamps do not allow the rays to penetrate inside. What are the technical ..
We continue testing LED lamps H1 model CL7. To compare light distribution and illumination, I use a Renault Duster headlight and an H1 lens. I wanted to compare the H1 LED lamp with the H1 halogen in the bi-xenon bilinse. But along the way, it turned out that the halogen did not fit there, only xenon. The CL7 we tested worked fine with this lens, but had to find another one.
- 1. Characteristics
- 2. Test conditions
- 3. Comparison according to GOST
- 4. Measurements in lenses
- 5. Light distribution, lens # 1
- 6. Measurements in a reflective headlight
- 7. Measurements of the far
- 8. Results
- 9. Where to buy
Specifications
The color temperature of 5000K is optimal, it is neutral white light without yellowness and blue tint. The luminous flux is the maximum for LED filament lamps.
Equivalent value takes into account improved eye perception white light in the dark. In this case, the improvement is 65%.
Test conditions
For a full comparison of light sources with different characteristics, we use GOST 41.112-2005, which indicates the control points by which measurements are taken ..
Points description:
- B50L - driver blindness;
- 75R - shoulder after 75 meters;
- 50R - shoulder after 50m;
- the number in the name indicates the distance to it in meters, the letter is responsible for the position.
Comparison according to GOST
A colleague brought lensed optics from the new Honda Accord 7, completely new, removed immediately after buying a car in a car dealership. The dipped beam lens turned out to be very unusual in the bad sense of the word, it has a strange light distribution. Measurements with halogen showed very low results, so the owner complained about a bad neighbor. As a result, I had to conduct a test on what was.
Lenses measurements
The H1 LED bulb worked great for bilens # 1. The halogen bulb did not want to give good results, although the diode in it works well:
- measurements were made several times;
- changed halogens;
- I tried to put the light bulb in a different way, but it is only put in one position.
Light distribution, lens # 1
Reflex headlight measurements
For the far, we use the Renault Duster headlight, set the daw of the near one according to the scheme. The degree of focusing of the diode can be seen in the photo. The light spot does not differ from the halogen one, which indicates the correct focus of the headlight.
Measurements of the far
Outcomes
Based on the results of all the tests carried out, we can say that the CL7 H1 LED lamp turned out to be as excellent as the CL6 H1. They have no structural problems, no overheating, the headlights fall into focus. I recommend the tested bulbs to anyone looking for a good LED car bulbs. Once installed on your car, you will get the correct road illumination improvement without increasing the glare of oncoming traffic. According to my statistics, only 10% of LED auto lamps can be installed and operated on a car. The other 90% of the models will bring you a lot of problems.
Where can I buy
Can only be purchased in the store Cool-Led.ru
in others, they are not for sale because this store is the manufacturer.
Get a 3% discount using the "ledobzor" coupon
A huge number of similar lamps are sold, but only a few models work correctly in the reflector. The LED auto lamps Smart, CL6 and CL7 remain the leaders. These models are gradually being improved, eliminating the identified deficiencies.
Lighting devices are extremely important element cars. Without them, it is generally impossible to drive a car at night or in bad weather conditions (for example, in fog). Therefore, it is important that they are of high quality and work well.
Headlights are one of the most unified devices in a car system. They are usually manufactured so that they can be used for different types of vehicles. Also, they must all meet certain standards. There are individual country and international standards. The letter "E" on the headlamp stands for the certificate, and the number stands for the country that issued it.
Therefore, lamps can be classified. The H1 lamp is the simplest in this hierarchy. The most difficult are metal halide lamps. You can choose your own headlights, regardless of whether you have a passenger car or a large truck. Certified lamps are suitable for everyone.
There are several signs by which lamps are divided into categories:
Base / plinth device
Appointment
Lamp design
Principle of operation.
According to European standards, lamps are labeled with letters (h, hb, d) - according to the type of base and number, according to the model.
Bulb h1 belongs to the series of sealed lamps. They use spring loaded clamps or sockets to prevent the lamp from loosening or twisting. They also have a tight spiral tolerance relative to the flange. This means that they are placed in focus of the optical element at an ideal distance from the reflector.
The H1 bulb is a traditional headlamp option that has been in constant demand in the motoring market for a long time.
They are often installed in four-phase headlight systems.
Initially, h1 bulbs were installed only for low beam. Less often for the distant.
The appearance of lamps of category h7 lamps h1 began to be used for fog lights or for driving lights. This is due to the fact that they are more dazzling than h7 and give a lower luminous flux.
Such lamps have a coiled spiral or stretched along the optical axis. They are designed for headlights or spotlights.
If it comes O fog lights, the spiral is positioned perpendicular to the reflecting axis. The h1 type base is also used for additional lighting.
Types of bulbs h1
Of course, there are more than one type of h1 device bulb. You can choose the ones that seem most suitable for you:
Incandescent bulbs h1 or classic (the principle of operation is the same as in household ones. Outdated type for car headlights)
H1 halogen lamp (the bulb is made of quartz refractory glass. It is filled with an inert gas supplemented with halogen vapor. They give a higher light output than incandescent lamps. Due to their low cost, h1 hallogen lamps are still very popular on the market)
H1 LED lamps (based on LEDs. These are semiconductor crystals - the latest invention in the world of lighting technology. They have a number of indisputable advantages (for example, resistance to external influences, high luminous efficiency, economy). white pleasant light. disadvantage - high cost)
H1 xenon or metal halide lamps (light produces an electric arc between electrodes in a bulb with xenon, which is also an inert gas. Xenon headlights very popular for their high luminous efficiency and reliability. At the same time, they have a significant drawback - they blind the drivers of the oncoming traffic).
When choosing an h1 lamp for yourself, be sure to make sure that it is produced with high quality. H1 lamps are the brightest produced by OSRAM, GE, PHILIPS. By comparing the quality of light, you will see that it is worth spending the money, but at the same time getting a much higher light output and long term work.
H1 lamps review of the best 2015
When comparing the characteristics, among the h1 lamps of the last year, the following are the best:
Philips x-treme vision+ 100% (12 volts, 55 watts)
Bosch h1 5000k (35 volts, 35 watts)
How to care for h1 headlight bulbs?
It happens that even high-quality lamps fail. This can happen due to improper operation.
How to properly care for your h1 headlights?
Swap them in pairs. This applies not only to h1 headlights, but also to everyone else. Even if only one is broken, change both
Adjust lighting regularly. This should be done at least once every 1 year. If the lamps were changed, then after replacement.
Change bulbs every two years or after 50,000 kilometers
Clean the lamps. Dirt entering the headlights significantly reduces the light output. Therefore, the optics must be cleaned regularly.
Always carry spare headlights with you
Watch your headlights. Choose your light source carefully - this is your guarantee of safety on the road!
Any car is equipped with low and high beam headlights. Lighting system is an integral part of every car. The better the beam of light, the easier it is for the driver to analyze the traffic situation. There is no need to explain how the quality of the headlights affects the number of accidents at night. Now a lamp with an H1 base is widespread. In this article we will talk about what types of lighting solutions are and what are their features.
Base characteristic
It should be noted that this is not the only type of base that is used in the vehicle lighting system.
In addition to the H1 marking, the lamp can be H7, H11, H4 and other varieties. In our case, a product with such a plinth is installed in:
- High beam.
- Near.
- Fog lights.
Varieties
There is a difference between the lamp design itself. There are several types of products:
- LED bulbs H1.
- Xenon.
- Halogen.
The latter were born before anyone else. We will talk about them below.
Halogen
The first bulbs of this type were of the linear type. Initially, the design used inert gas... Over time, the design of the product has been improved. H1 halogen lamps are now a glass bottle with a buffer gas inside.
Usually these are bromine vapors or iodine halogens. For the first time, such a design was introduced by the engineers of the German company OSRAM. The peak of the popularity of the products fell on the 80s and 90s. On some budget cars with an H1 base, the lamp is still used.
How it works?
This product is powered by the vehicle's on-board network. The electricity that is supplied to the lamp passes through the tungsten coil. As a result, it becomes hot and illuminates the diffuser. A beam of light is directed onto the roadway. A halogen H1 lamp works in conditions elevated temperatures... Only under this condition will the spiral illuminate the road well.
Why is halogen a thing of the past?
Since such a lamp is very hot, its service life is no more than a thousand hours. With the introduction of new laws that oblige you to drive with the dipped headlights on, using such optics is simply unprofitable. It quickly burns out and fails. Also, many car owners do not like the glow temperature.
The H1 auto lamp shines in the range from one and a half to three thousand Kelvin. This is ordinary daylight, often giving off yellowness. Light output characteristics are no more than 22 lumens per watt. Even modern products are not able to shine white like LED and xenon counterparts. But about them a little later.
It should be noted that the Philips H1 or OSRAM halogen lamp is one of the cheapest on the market. Analogs with a white glow are several times more expensive. Also, the daylight produced by the tungsten filament does not affect the diffuser. It does not fade even with high lamp heat.
Xenon
Now let's talk about how they differ xenon lamps H1. They appeared relatively recently. They began to gain great popularity after the 2000s. The principle of xenon operation is based on the ignition of an electric arc.
Inside glass flask there is a special gas - xenon (hence the name). The product has two electrodes, which, when interacting with gas, generate a huge beam of light. It is worth noting that the normal on-board network of a car is not able to turn on H1 xenon lamps. For this, the ignition unit is used. It generates a voltage of 25 kW. As a result, the lamp produces good and bright light. It is 3-4 times more powerful than its halogen counterparts.
As for the temperature of the light flux, it ranges from 4 to 6 thousand Kelvin. The characteristics of the H1 xenon low beam bulb are noteworthy.
Xenon features
Why did he become so popular? This optics is different high efficiency... H1 lamps of this type are capable of penetrating any fog. They illuminate the road especially well in the rain, where halogen is simply useless. The service life of these products is up to 2.5 thousand hours. All due to the lower heating temperature. If in halogen lamps 40 percent of the energy is converted into heat, then in xenon lamps - only 7.
About disadvantages
Xenon is not always legal. If you install such optics not at a specialized service station and without paperwork, a fine is imposed for this. Also, if this xenon is not original, you will not be able to pass the technical inspection. In other CIS countries, such tuning does not provide for such fines. In Russia, you can drive with xenon only if it is installed at the factory. The next disadvantage is the complexity of the installation.
Since lighting the lamp requires special unit, it needs to be placed somewhere. Often they drill a hole in the back cover of the headlight and run the wires. The unit itself is installed outside the headlight, in the engine compartment. If a lamp is used with an H1 base in foglights, it is important to achieve tightness of all connections. Otherwise, the PTF will flood at the first rain. As for the cost, the original xenon (kit) can be purchased for 5-10 thousand rubles. Halogen headlights benefit in this regard. And, of course, after installation, it is required to re-adjust so as not to blind oncoming drivers.
H1 LED Bulbs
A couple of years ago, LED solutions appeared on the market. This is a completely new, revolutionary development. 
LED lamps are developing at a rapid pace. The element consists of a crystalline semiconductor mechanism and an optical system. Also in this lamp there is a non-conductive substrate with contacts. The distance between the crystal and the lens is filled with transparent silicone. Such a lamp H1 does not heat up, while providing a wide range of glow temperatures - from 1500 to 6000 K. Here you do not need to use additional block ignition. The element is installed in place of a standard lamp. The main plus is legality. LED products are not prohibited in the Russian Federation and can be installed on any car. At the same time, the headlight does not blind oncoming drivers. It costs the same as xenon solutions.
Problem spots of LEDs
It would seem that H1 LED lamps combine all the advantages of xenon, while being easy to install and absolutely legal. But it is worth noting one feature of diodes. These are power surges. Surely you installed similar products in size. After a few months, they stopped working. But how can this be, because the service life of LEDs is 10 years?
It's simple - the element is afraid of power surges that so often occur in the car. Therefore, modern LED solutions are equipped with regulators, or "drivers", which stabilize this parameter of the on-board network. But even with these devices, the service life of the products is no more than a year. In addition to voltage surges, LEDs are very afraid of overheating. If you buy such lamps, then only with additional radiators.
Without them, the product will quickly fail. And even with such radiators, the LEDs can easily fit inside the headlight itself, without additional alterations. This is a big plus.
What is the bottom line?
So, we found out what kind of lamps there are with an H1 base. What should a motorist choose? It is rather difficult to answer this question. Halogen is obsolete and xenon is not always legal. But the future is definitely with LEDs. In a couple of years, they will oust xenon solutions from the market. After all, the device of LED lamps is constantly being improved. Additional radiators and voltage regulators appeared. You can take a chance and buy such lamps now. But, judging by the reviews, they will last no more than a year.
Alternatively, you can use reinforced halogen lamps marked White or +130. These products differ more high temperature glow (close to xenon), while illuminating the road no worse than modern diode counterparts. Philips is worth mentioning as a manufacturer. The company manufactures high-quality lamps with H1 base and acceptable luminescence characteristics.
