Sometimes you need to install the toilet yourself. Not everyone knows how to do this correctly and what to pay attention to. Find out the advice of the professionals.

In contact with

Classmates

Introduction

“How to install a toilet with your own hands?” - this is the question every owner asks new apartment or at home. - an integral part of any apartment or house. It, like a bathroom, a sink, requires connection to a water supply, to a sewerage system, city or private, and needs complete insulation internal water. For its full operation, it is necessary to adjust the flush handles, permanently set the tank, check the entire structure for cracks, and much more. At first glance it seems like hard labor, but it will still be better if you do it yourself. So, if it breaks, you will quickly find your bearings and fix the leak. If the work is done by experts, you will have problems.

Installation drain mechanism

Before buying a toilet

Before purchasing, you need to check the dimensions of the product and compare them with the dimensions of the toilet. It is worth taking into account all the nuances of the floor covering and making sure the quality and reliability of the device. If you have any preconceptions about toilets, put it out of your head, it's just a regular piece of stone. For now.

Stage 1. Installation of the drain mechanism

The toilet in its original form is a bowl and, inside of which there is stop pipe and other details. To complete a complete DIY toilet installation, you need to assemble them together so that everything is airtight. This is done by tightening many nuts, screws, and fasteners.

First you need to insert the drain mechanism - it comes already assembled - into the single large hole at the bottom of the tank, then secure it with a nut or two, depending on the design of the tank. The nut is tightened either by hand and your own tools, or with the special wrench included in the kit. Be careful not to damage the pipe, otherwise it will cause ongoing problems later. For proper insulation, rubber gaskets are installed at any connection. In this case, place it in the inside of the tank, but do not twist anything, or it will tear.

Connection of bowl and tank

Stage 2. Connecting the bowl and toilet cistern

To connect the tank to the toilet bowl, you will first need to put a rubber seal on the flush mechanism. This is done for safety and tighter isolation. Now carefully place the tank on the bowl, focusing on the shaped features and holes for the nuts. Make sure that both parts are perfectly aligned so that there is no small holes or other errors. Installing a DIY toilet will be quick and easy if you check every step carefully.

Now let's fix the tank to the bottom of the toilet; to do this, count the number of holes for the nuts and take metal washers, studs, cone gaskets and nuts in exactly that quantity. This will avoid missing holes and secure the device as much as possible. For each of them, you first need to connect the pin with the washer, then put the conical one on top rubber gasket and install this structure on the hole. Carefully insert the nut and screw it in. Remember, you cannot tighten the nuts completely at once; first, fill all the holes and twist evenly, that is, first turn each screw halfway, then tighter and all the way. It is optimal to screw everything in three approaches; you should not try to save time and rush.

Autonomous toilet

Types of tanks

How to install a toilet with your own hands if you have non-standard look tank? Let's figure it out. There are three types of tanks:

• Standard, attached to the bowl;
• Autonomous, located above the bowl, suspended from the wall;
• Built-in, found in wall-hung toilets;

The difference is the location of the tank, the method of draining, and the fastening. In essence, the technologies are quite similar, but the installation is still slightly different.

Installation of an autonomous tank

The autonomous tank is attached to the wall using bolts, nuts or another method suggested by the manufacturer. The tank is attached to the toilet using a drain pipe. This type of toilet is not very convenient; it is used in in public places, but if you use it, then the installation procedure is as follows: first, attach the drain pipe to the toilet without attaching it to the tank. We mark the lower attachment point. Tighten the nut or bolts at the connection between the pipe and the bowl. After this, calculate the height of the tank mounting and mark it with a marker. Using a level, set the ideal position of the pipe and secure it to the wall, having first checked the height. We connect the tank and pipe using the same method as with the bowl, then screw both elements to the wall using brackets and dowels. Installation is complete. After complete installation toilet, check the functionality of your system, inspect it for leaks.

Built-in toilet

Installation of a cistern built into the wall

The next type of toilet is, which, unlike the previous one, has a completely different fastening technology. Here the main element is the tank, not the bowl, it closes wall panels, tiles, drywall - any accessible method. The advantages of this model are that it takes up little space and looks non-standard, there are design ideas, turning the toilet into something completely unpredictable. If you want to diversify the style of your apartment, this option is right for you. The disadvantages of this type are unreliability (depending on quality) and high cost. Usually the installation technology is described in the instructions, as there are different variants installations. However, it does not say how to install a built-in toilet with your own hands so that it works specifically with your sewerage and water supply system. Typically, the tank is suspended from the frame, secured with several bolts and nuts through a gasket, carefully checked for strength and reliability, where the unique installation ends. Adjust the drain to save water and proceed to the lower paragraphs, which will describe in detail how to attach the unit to a sewer or water pipe.

How to install a wall-hung toilet with your own hands

Connection to sewerage

Step 3. Attaching the float to the assembled part

It was possible to connect the toilet with the float before, but then it would interfere with tightening the nuts. Correct assembly This is done like this: put a rubber seal on the thread of your float, also for safety, now insert it into the tank with the side where the thread is located on the float. You need to connect the tank and the float from the inside, then, as in previous cases, lightly secure it with a suitable nut.

We have already solved half the question of how to install a toilet with our own hands - the device is fully assembled and ready for use. Now you need to properly connect it to your sewer and water supply system and install it in a specific place.

Stage 4. Connection to the sewer

Before connecting the toilet to the sewer system, you need to accurately select a place for it and punch a hole for the pipe. If you have done this, proceed with the connection. For this it is better to use, it combines strength, durability and, importantly, flexibility. With this material you can move the toilet within its length, which will be very useful for further work. The installation of a corrugated outlet is carried out as follows: the side with the feather gasket is inserted into the sewer pipe, and the other - onto the outlet part of the toilet. Tighten these holes as much as possible, they will fasten themselves.

Installation process

Stage 5. Installing the toilet on the surface

The next stage is installation, attaching the toilet to its proper place with your own hands. First, determine the position in which it will be comfortable for you to sit, the toilet will not wobble or creak, the corrugated pipe will hang freely and will not stretch or compress. Now let's turn our attention to the bottom of the toilet - here you can see several holes. Draw their outline with a marker or other writing medium and move the toilet away, but be careful not to damage the incoming pipe.

It is optimal to first move it a little to one side to drill holes from one part, then do the same on the other. The most convenient and correct way to do this is with a hammer drill; under no circumstances drill holes through the toilet itself; cracks, chips, and breaks are possible. Better spend your time doing quality work.

Stage 6. Tighten the nuts

Insert into the holes made plastic stoppers supplied with the toilet. Now move the toilet back to the desired position and screw it using the long screws that are usually included in the kit. As in other cases, do not forget to install metal washers, cone gaskets and studs. Try to shake the device in place, if it moves, twist it harder, otherwise when you sit on it, it will shake and eventually break. Ultimately, the toilet will stand firmly on the surface, and no movement will generate a squeak. At this point, do-it-yourself toilet installation is complete, all that remains is to attach iron pipe connecting the unit to the water supply system. This process is a little more complicated than the previous ones, but quite doable.

Metal-plastic pipes

Stage 7. Connecting the plumbing system - options

When connecting the water supply to the toilet, you can use two types of pipes - a flexible hose, negative sides which is unreliability, creaking, leaks, fragility. It will constantly get in the way, bend and wrinkle. Positive aspects - ease of connection, the ability to install on toilets of non-standard format.

The second method is a metal-plastic pipe, reliable, strong, but not bendable at all. Low-quality models, which are the most common on the modern market, will leak and rust. On the other hand, if you buy an expensive and high-quality pipe, it will last a really long time and will not cause any problems in the future, which cannot be said about even the best hoses. We recommend using this method.

Stage 8. Connecting the water supply system. First way

Correctly installing a toilet with your own hands involves spending your personal time, but if you still decide to finish this job quickly, use a flexible hose. It is best to buy a corrugated hose, its advantages have been described. For correct fastening, attach one end of the hose through the gasket to the toilet, the other to the water supply system. After this, tighten the ends, but do not use excessive force - the gasket may break and then the hose will start leaking from the very first use. If during operation you damage the hose, you will have to replace it, since its repair will cost you a lot of time, given that positive result not guaranteed.

Toilet installation

Stage 8. Connecting the water supply system. Second way

Let's look at the second method in detail - connection metal-plastic pipe. It is installed in the same way as a flexible hose, only you need to twist the ends even more carefully - the metal will easily cut the gasket, so you need to find a middle ground between under-twisting and over-twisting. Metal pipe will not bend or interfere, so for this case it is ideal option. After its installation, work with the toilet will be finally completed. All that remains is to attach the lid to the toilet, seal the joint between the unit and the floor, and that’s it. Don't forget to add a tap to your pipe that can quickly shut off the water supply - this will prevent serious water leaks.

Bottom line

After reading this material, your question about how to install a toilet with your own hands will be resolved. The main rules when installing a toilet are accuracy, patience, and attentiveness. Follow these rules and you will succeed. Remember that during the first time after final installation, various problems may arise, such as leaks. Don't worry, sometimes after twisting the pipes may come off and leak. If you encounter this problem, just tighten the required nut.

Install a toilet with your own hands video:

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

If your plumbing has failed, your toilet often needs to be replaced. U this process there are many nuances. It is important to choose the right plumbing equipment. And you should also know how to install a toilet with your own hands. You can watch a video of this process on the website. To carry out such work, you can contact plumbers, or you can try to do the installation yourself.

Self-installation of plumbing will save significant financial resources.

Remember to check all dimensions before purchasing equipment. They must be combined with the dimensions of the toilet. Consider the nuances of the flooring and its quality.

There are certain requirements for installing a toilet yourself. You should know about them:

• normal installation height plumbing equipment about 40 cm;
• Each product has its own requirements for the functioning and cleaning of the internal container.

The shape of the bowl can be dish-shaped, visor-shaped, or funnel-shaped. The most popular model is the visor model.

Helpful information! It is better to choose a design with a circular flush rather than a straight one. This option provides treatment of more than 90% of the surface.

What will you need for work?

Before installing the toilet with your own hands, the video will show you how, you need to select suitable tools. You will definitely need a drill, an adjustable wrench, two types of drills, a hammer for driving in dowels, a rubber spatula and a screwdriver.

In some cases, alignment is required floor surface. Before work, it is important to turn off all plumbing fixtures.

Dismantling of old equipment and preparatory work

Before installing the toilet on a tiled floor, make dismantling work. Disconnect the drain tank, unscrew the hose and remove all fasteners. It is important to unscrew all fasteners for the tank. Then disconnect the drain from the sewer line. If drain device fastened with cement coating, you will need a hammer and chisel.

Preparation for installation includes studying certain installation nuances. Any modern equipment comes with special instructions. During installation Special attention It is worth paying attention to the float, which helps regulate the pressure and volume of water.

Helpful information! After dismantling the plumbing fixture, it is important to plug the resulting hole. Since not only toxic fumes flow through it, but there is also a danger of explosion.

Related article:

How to disassemble a single lever mixer. From the article you will learn what a mixer consists of, what malfunctions there are, and how to properly fix them yourself.

Installation procedure

To perform the installation correctly, it is worth studying the video. Installing a toilet with your own hands has many subtleties. To carry it out you will have to do the following:

• clean the area inside the sewer line;
• You should install a corrugated pipe at the outlet hole and then place it on the bowl;
• you need to place a special gasket or fabric under the landing heel;
• carefully move the container closer to the wall;
• on floor covering the installation locations of the structure are drawn;
• then the equipment is moved to the side and holes for fasteners are drilled;
• dowels are placed in holes made with a drill;
• screws and washers are screwed into the inserted dowels;
• Apply sealant along the edges of the corrugation;
• Secure the drain tank with corrosion-resistant bolts;
• install flexible water hoses. They can be sealed using flexible silicone or rubber washers.

After carrying out the work, you need to check for leaks at all joints. Do not use winding for sealing, which will cause leakage. After installing the equipment, you should not use it immediately. You need to give the silicone time to harden. This will happen within 6 hours. You shouldn't skimp on the sealant, but it shouldn't be inside the pipe.

Important information! To make holes in a layer of tiles, you need to drill through the top layer and then use a hammer drill.

Related article:

Detailed review different types bath faucets with photo examples and prices in a special publication on our portal.

Installing a regular toilet

To understand how to properly install a toilet, you need to watch a video where all stages of installation are explained step by step. Even a standard toilet can have different geometric shapes, suitable for both classic and modern interiors.

The main advantage of such equipment is the ease of installation. It's much easier to change than hanging models. Compact devices are mounted in the traditional version or mounted to the wall. Similar models can be purchased at an affordable price.

The disadvantages include difficulties with care. It is better to choose models with no niches where dirt can collect.

How to install a toilet with your own hands: video tutorial, equipment with a hidden tank

The hidden tank is mounted away from the main equipment and covered with decorative details. Such products differ from standard devices in mounting options. To install such a structure, floor-standing and hanging models are used. The tank can be installed on the other side of the wall or even in a separate block. When located in the toilet, a special hatch is placed on the surface, which is designed to carry out various works in the tank. In contrast of standard version in a method in which the valve of the drain system is moved.

Do-it-yourself toilet installation: video

There are special video instructions: how to install a toilet installation. The best placement of the device is in an area away from the door. At the same time, take into account the proximity of communications so that you do not need to pull them across the entire room.

During preparation, the planned structure is marked out. Frames and their connections are indicated. Places for attaching the installation frame to the wall and floor are marked.

This design has its own characteristics:

• the drain button is usually located at a height of a meter from the floor;
• the distance from the structure to the wall is 150 mm;
• There should be about 20 mm between the wall surface and the tank.

Important information! The installation should be carried out in a niche where the riser and the entire sewer structure are located.

Installation of a suspended structure

The table shows step by step installation hanging device.

Image	Installation stages
	Prepare all the necessary materials and a set of tools. Also mark the structure.
	Marks must be placed on the floor and walls. A line is drawn on the wall showing the axis of the device. It is important to note the gaps to the wall and to the cistern.
	Installation begins with fasteners. After installing the dowels, the brackets and anchors are installed. The structure body is mounted using special bolts. Vertical elements aligned by fitting to the anchor thread.
	Connection to communications is being carried out. In this case, plastic pipes are used.

Installation of a floor-standing device

In the table you can see the installation of floor equipment.

Image	Installation stages
	The drainage device is being assembled.
	The tank is installed. In this case, a seal is placed on the drain hole. The bolts are inserted into special holes and secured with nuts from below.
	Installation and connection of equipment.
	At the end of the work, all joints and connections must be coated with sealant.

Compliance with technology installation work will help you install the toilet yourself in the shortest possible time.

You might also be interested in:

Connection washing machine to water supply and sewerage independently, quickly and efficiently How to make heating in a private house from polypropylene pipes with your own hands

Manufacturers offer wide choose plumbing Each model has its own and imposes certain requirements for the installation procedure. Installing a toilet with your own hands is possible, but only if you follow the manufacturer's recommendations. We invite you to familiarize yourself with existing species, the procedure and features of the work, so that self-installation is carried out in accordance with regulatory requirements.

In order to correctly place the key ones, you should prepare a drawing to scale on which the plumbing fixtures will be located taking into account sanitary and hygienic standards. You can create a comfortable layout by adhering to the following recommendations:

• The area in front of the toilet must be at least 60 cm long;
• On the sides of the toilet there should be free space minimum width 25 cm;
• The area in front of the sink should not be narrower than 70 cm;
• The bidet and toilet should be fixed at a distance of at least 35 cm;
• It should be fixed at a height of 60÷80 cm above the floor surface, and - 95 cm.

The recommendations given are relevant for, for which it is enough to follow standard norms, principles of practicality and comfort. IN apartment buildings placement of plumbing fixtures is regulated by SNiP, which are developed taking into account safe operation communications. When planning to do the installation yourself, you should definitely familiarize yourself with these standards.

Basics of choosing the right toilet for your home

When choosing suitable model features should be taken into account. Noteworthy:

• The area of ​​the room, which affects the dimensions of the purchased plumbing fixtures;
• Availability, geometric parameters and location of the external. It should be taken into account how far it will be located from the intended installation location of the toilet cistern;
• Location of the sewer pipe;
• Release angle. The best option is to install a model with an oblique outlet. If the measurement shows a slight coincidence, you should purchase a special adapter—a drain corrugation—along with the plumbing fixtures.

Manufacturers offer plumbing fixtures various configurations, which has its own fastening features. The division can be made into floor-mounted and wall-mounted models. To install the latter you need less space, and they have a more attractive appearance. This is a suitable option for. Floor-standing models are more reliable and practical.

• hammer;
• drill (perforator);
• yardstick;
• marker for marking;
• adjustable wrench or set;
• pliers;
• screwdriver.

It is also worth preparing:

• FUM tape;
• flexible hose;
• corrugation;
• silicone sealant with a pistol.

Removing an old toilet

When dismantling, you should follow the instructions in accordance with which the installation of once new plumbing was previously carried out. Do-it-yourself toilet replacement begins with the following work:

• shut off the water supply inside the drain tank;
• drain the water inside the tank;
• unscrew the tank fasteners. At large thickness lime deposits or rust, use a screwdriver to fix the bolt head and unscrew the nut with an adjustable wrench;
• Having removed the barrel of the tank, unscrew the fasteners securing the product;
• disconnect the drain from the sewer pipe. If cement coating was previously used during installation, use a chisel to chip off the cement;
• Drain the remaining water from the toilet and set it aside.

Advice! After dismantling, the hole in the sewer pipe should be closed with a fabric plug to prevent it from clogging.

Preparing a new toilet for installation

Having decided to do the installation yourself, you should figure out how to assemble the toilet. Any model includes two components: a bowl and a drain tank. At the preparation stage, these parts should be connected to each other using the fasteners included in the delivery kit.

First, assemble the drain tank. To do this, a drain mechanism and a float are installed. As a rule, installing the drain mechanism is not difficult, since it is initially supplied assembled. It is inserted into a special mounting hole at the bottom and secured with a plastic nut, onto which a rubber seal is carefully placed. The tank is secured to the toilet using metal pins and nuts.

Attention! Rubber seals should be used at all connections.

A video of assembling a toilet with your own hands will allow you to better understand the sequence of work:

How to install a regular toilet with your own hands?

After the plumbing has been assembled, it is worth clarifying how to install the toilet with your own hands. The work can be performed in the following sequence:

Photo	Description of work
	We mark and drill mounting holes in the floor.
	We remove the accumulated dirt and dust.
	We hammer plastic dowels into the prepared holes.
	We install the toilet at the place of future use and fix its spatial position with bolts.

If you haven’t yet figured out how to do the installation yourself, a toilet installation video will help you learn all the main steps:

Installing a toilet with a hidden cistern

Models with hidden tanks allow you to use the available space more rationally. They are easy to care for and look stylish. Installation of a built-in toilet can be done in different ways. We invite you to familiarize yourself accessible ways and features of the work.

Installation of a wall-hung toilet with installation

First, you need to decide on the model of plumbing fixtures. Its geometric parameters will affect the requirements for the mounted system. Installation of the pendant can be performed in the following sequence:

Photo	Description of work
	The height of the frame structure is adjustable.
	Installation of the toilet installation in a metal profile 50 mm wide and screwing it to the floor through special mounting holes.
	A frame system is installed to which it will be attached.
	Finishing material is attached.
	On seat Silicone sealant is applied.
	The fittings included in the delivery kit are inserted into the mounting holes.
	The toilet is hung and fixed using the fasteners included in the delivery kit.
	The water connection is made in accordance with the manufacturer's instructions.

Related article:

If you know the current level, it will be easier to check the value of different trade offers. The information from this article will be useful when performing installation operations with your own hands and for monitoring the actions of professional teams. In particular, they will help to correctly negotiate when determining the cost of performers’ services.

Installation of floor models

Instead of a wall-mounted model, you can install a floor-standing model with a hidden tank. A large assortment allows you to choose the right option for a toilet in any style.

The technology in this case includes the following steps:

Photo	Description of work
	A niche is being prepared in which the tank will be installed.
	Do-it-yourself toilet installation inside a niche and fixing it.
	Performed final finishing walls, and plumbing fixtures are installed in a designated place.

The main types of fastening the toilet to the floor

Fastening to the floor can be done in different ways:

• On, installed in the screed. The hardware is placed in places corresponding to the places where the floor pan is attached, and then the screed is poured. Enough difficult option, which can be difficult to implement with your own hands without the help of specialists. Insufficient length of anchors may make it difficult to install the nut after installing the toilet;

• On a wooden base, the geometric parameters of which must correspond to the dimensions of the installed plumbing fixtures. Nails are first driven into the board, laid on the floor with nails down, and screed is poured. During the installation process, the toilet is “seated” on epoxy glue and screwed to wooden base ordinary screws;
• On the dowels. This is how a toilet is most often installed on a tiled floor. After installing the product at the site of future use, the mounting holes are marked. They should be deep enough to hold the bowl in place. To ensure reliable fastening, the bowl can be installed on epoxy resin and add some sealant to the mounting holes.

Advice! To prevent the toilet from cracking during installation, gaskets should be used during installation.

The main types of fastening the toilet to the wall

Depending on the design features of a particular model, you can install a toilet yourself using:

• Frame structure, which is a rigid frame attached to the wall and floor. The tank and pipes can be located behind a false wall;
• Block system. A more affordable and compact option that involves installation exclusively on a permanent wall. Installation is carried out in a specially prepared niche, which is then laid with bricks or blocks.

Main types of connecting a toilet to a sewer system

Various adapters are used to connect the system to the sewer. Each type has its own distinctive features. We suggest that you familiarize yourself with the main varieties in order to have an idea of possible options.

Fan pipe or plastic pipe

If you decide to use an adapter, you need to know exactly the characteristics of the model that you plan to install yourself. When choosing suitable option Particular attention should be paid to the shape of the toilet bowl.

Products with an oblique outlet are mounted in the floor, with a vertical outlet - in the wall, placing the pipe at a right angle. With an oblique outlet, it is permissible to install a “wall”, placing the connecting pipe at an acute angle. When replacing plumbing fixtures, you should purchase a model with a similar release, otherwise the use of adapters becomes impossible.

Attention! When using a plastic outlet or waste pipe, modifications are not permitted. geometric shape products.

Eccentric

When using an eccentric collar, according to experts, it is not necessary to ensure the tightness of the connection using sealant. At correct location special rubber seals you can achieve a reliable and tight fit of the mating elements. If the pipes are cast from cast iron, it is still worth using a sealant.

Corrugation

Corrugated pipe (corrugation) is used when other materials cannot cope with the task. How to install corrugation on a toilet? After fixing the system, work is performed in the following sequence:

• One end of the corrugation is placed in sewer hole. The joint must be lubricated with silicone sealant;
• The second end is put on the toilet outlet;
• Check the tightness of the connection.

Connecting the bathroom to the sewer is done in three ways. Each of them has its own characteristics. We suggest you find out how you can connect a toilet to a sewer and choose the most suitable option.

Bathroom with vertical outlet

Models with vertical outlet are especially popular in European countries. Design Such plumbing products require the presence of a siphon located in the bowl and an outlet pipe, which is directed downward during installation. This design is universal, and toilets with vertical outlet can be installed at any angle to the vertical.

Do-it-yourself toilet installation is carried out in the following sequence:

• Markings are being made on the floor;
• A screw flange with a locking device is installed;
• A sewer pipe is mounted in the center of the flange;
• The toilet is mounted on a flange;
• The outlet pipe is fixed.

Bathroom with horizontal outlet

These products are sometimes called direct release toilets. He received greatest distribution on Russian territory. Such products have a rearward outlet. It is connected to the sewer pipe using a special cuff.

Models with a horizontal outlet are most often attached to the floor. The manufacturer provides special connection holes that allow you to attach the toilet to the floor. Dowels or standard screws are most often used as fasteners.

Advice! Fasteners should be tightened carefully so as not to damage the product.

Toilet with oblique outlet

A toilet with an oblique outlet can be connected as follows:

• Cleans the socket of a cast iron half-bend from old stuff and garbage;
• The toilet is installed on a layer;
• Excess cement paste is squeezed out. It should fill the half-bend socket by at least 2 cm.

This method is currently used quite rarely, since dismantling the equipment is quite difficult. Most often, preference is given to standard anchor screws. However, some cement paste can be placed under the sole of the toilet to compensate for any unevenness.

In some cases, silicone sealant can be used instead of cement paste. However, under significant or uneven load, the sole of the product may crack.

Then, using a sealing coupling, the outlet is connected to cast iron socket without displacement. With its help you can compensate for the existing horizontal or vertical offset. To ensure maximum tightness, silicone sealant is pre-applied to the outer surface of the coupling.

Connecting water to the toilet cistern

To provide supply tap water to the drain tank, you can use one of the following methods:

• Bottom eyeliner. Such models create a minimum of noise during operation. However, if during the installation process it was possible to ensure sufficient tightness;
• Side eyeliner. They are easy to install. When performing installation yourself, you may find yourself best choice due to the simplicity of the work. It creates a lot of noise when filling the tank with water. Some models come with an extended pour pitch, which reduces the amount of noise generated;
• Flexible eyeliner. Models in which the tank is located above the bowl are most often connected in this way;
• Hard eyeliner. Such a system can last quite a long time.

Connections for all types of hoses are performed in the following sequence:

• A separate tap is installed with which you can turn off the water supply. The insertion must be carried out according to all the rules;
• One end of the line is connected to the tap and secured with a special nut;
• The second end is connected to the drain tank and secured with a nut;
• The mating surfaces are checked for leaks.

How much will it cost to install a toilet: price for work

If you want to know the price for the work, installing a toilet can be done for a different amount. On average, such services will cost:

We hope you liked the article. Knowing how to properly install a toilet, you can do the entire amount of work yourself. Share in the comments how you solved this problem yourself. If you have any questions, ask. We will definitely answer.

YOU MAY ALSO BE INTERESTED IN:

Replacing and installing a toilet in a bathroom does not happen very often. Usually this happens along with the renovation of the entire room and apartment as a whole. That's why caring owners Rarely do they take on such a seemingly complex task. In fact, there is nothing difficult about installing a toilet with your own hands, especially since you can do it yourself for free and save money. family budget. It is enough to carefully think through the plan of action for preparing installation, choose the right reliable tool and equip yourself with the necessary knowledge base for installing the installation and connecting the toilet.

Preparatory work

Installing a toilet correctly starts with careful preparation surfaces. If the bathroom is made new renovation and the floor is covered with tiles, consider yourself lucky and you can install the toilet with your own hands directly on it. If replacing the toilet is not related to repairs, then you should first dismantle the old toilet and properly prepare the floor for the next installation.

Dismantling step by step looks something like this:

1. Overlapping cold water so that the toilet tank does not fill up when flushing.
2. Drain all remaining water from the tank by pressing drain
3. Unscrew the hose connecting the tank and the cold water pipeline.
4. We unscrew the fastenings of the toilet tank correctly to remove it. If the toilet is an older model, you may need an adjustable wrench or solid oil to make it easier to unscrew the old rusty fasteners.
5. After dismantling the tank yourself, we move on to the toilet mountings. In Soviet times, toilets were often screwed to wooden board screws, which was then concreted. Also, the toilet was installed on a sand-cement slide. In any case, you may need a chisel, spanners and a hammer. Carefully remove all traces of cement, screws and dowels.
6. By slightly turning and shaking the drain, we grind off all the water remaining in it and carefully remove sanitary product.
7. Carefully close the sewer hole remaining after dismantling to prevent toxic fumes from escaping to the surface. This can be done using a wooden or rubber plug wrapped in fabric.

After the old toilet has been properly removed, you need to decide how to level the surface underneath it. If it stood on a wooden board in a recess, the board can be removed, the recess can be concreted and reinforced with a sheet of metal, and then the toilet can be mounted with your own hands.

If the earthenware piece of furniture was placed on a mound of sand-cement mixture, it needs to be disassembled with a chisel and hammer until the surface becomes even. A router with a wire brush can be useful.

Types of toilets

Toilets differ not only in shape and color, but also in the installation method, bowl shape and other parameters. Let's take a closer look at some design features toilets.

There are models with a funnel-shaped bowl, a bowl with a shelf or a visor type and with a slope back wall. Installation of toilets of different configurations may differ slightly in terms of design, but the step-by-step instructions for installing toilets with your own hands are the same.

Based on the installation method, toilets can be divided into floor-mounted and wall-hung toilets. There is also a hybrid version, which is also called floor-mounted. The peculiarity of such a toilet is that its bowl stands on the floor, like a floor-standing one, but the tank and everything sewer communications are located in a false wall.

Advantages wall hung toilet considered a hidden tank, compactness and easy access to the floor underneath. On the other hand, a hidden tank requires the installation of false panels and, on the contrary, reduces the area of ​​the bathroom.

One of the most convenient types is a toilet with an oblique outlet. The wide mouth prevents clogging, and the stability of the design does not require the bowl to be attached. Installing a toilet with an oblique outlet is possible with your own hands; you can, of course, pay for the services of a specialist and wait for the final result, but many people decide to take the situation into their own hands and do everything for free.

Required tools and materials

Before installing the toilet, you should stock up on the necessary tools so that they are at hand at the right time. The list of tools includes:

• A powerful electric drill or hammer drill with a set of drills for concrete or tiles.
• Hammer.
• A set of open-end wrenches or an adjustable wrench.
• Roulette.
• Pencil or felt-tip pen.
• Screwdriver.
• Pliers.
• FUM tape.

In addition, you will need certain consumables and components:

• Corrugation.
• Flexible hose.
• Sealing silicone with gun.
• Toilet lining.

Step-by-step instructions for installing a new toilet

When all the preparatory work for installing the toilet has been completed correctly and the materials have been prepared, draw up detailed plan step by step how to install a toilet with your own hands.

Installation of a toilet with a traditional floor-mounted design can be done independently in the following ways:

• On a wooden stand
• On epoxy glue
• On dowels

Fastening to a wooden base step by step. If replacing a toilet is part of the overall renovation plan for a room, then it is best to install it on a wooden pad using fasteners, and subsequently concrete it correctly. When pouring the screed, the wooden base treated with drying oil is placed in the place where the toilet is supposed to be installed. In this case, you should take into account the dimensions of the plumbing fixtures. The board is filled with solution to the top and subjected to prolonged drying.

Installation of the toilet step by step with epoxy glue. Fixing the toilet with epoxy glue will be an excellent option if the bathroom has a perfectly flat floor:

• The surface should first be degreased with solvent or any other substances.
• The base of the toilet also needs to be treated.
• Notches or marks are made with a pencil on the floor.
• Next, the glue must be carefully applied to the plumbing product or floor at several points, usually four of them. After this, the toilet is pressed against the surface for 12 hours.

Installation of the toilet installation step by step using screws. If the base of the structure has holes for fastenings, it is advisable to install the toilet with screws or dowels:

• We place the toilet as close to the wall as possible or in the way it will stand in the room.
• You can pre-connect the corrugation to sewer system with your own hands, so that you can see at what distance from the wall the plumbing item should be placed.
• Through the holes at the foot of the bowl, we correctly mark with a pencil or felt-tip pen the place for drilling holes for the dowels.
• We set the toilet aside and drill holes.
• We install the fasteners.
• We install the toilet with our own hands so that the fasteners go through the holes in the toilet.
• We thread a rubber or plastic washer-gasket so that the pressure of the bolts does not destroy the plumbing.
• We tighten the bolts.

It is worth mentioning that some types of toilets are quite stable. Installing a toilet with an oblique outlet step by step does not require drilling or doweling.

A completely different principle for mounting and installing a wall-hung toilet. All sewer lines are hidden in the wall. To securely fasten the wall-hung toilet, a metal frame embedded in the wall is used. The wall-hung toilet is installed on it step by step, and the hidden tank and sewer and water hoses are carefully placed inside the structure, which is then covered with plasterboard or clapboard yourself.

The wall-hung toilet is stylish appearance and higher cost. If you look at it, connecting a toilet to a wall-mounted sewer is not much more complicated than usual floor mounting. You can easily learn how to install a wall-hung toilet yourself.

Do-it-yourself toilet installation: video

To learn in detail and clearly see how to install a toilet with your own hands, we bring to your attention a video. After watching the video tutorial, you will be able to compare the characteristics of your toilet and independently connect the toilet with your own hands step by step.

Do-it-yourself toilet installation on tiles

Correct installation of a toilet on tile is considered the most difficult for several reasons. Firstly, no one wants to ruin a new one tiles. Secondly, this material can be quite fragile, so it requires particularly careful drilling. Thirdly, the earthenware toilet must be securely fastened to the tile, since its surface is smooth and the structure can move.

The presented video shows the correct installation of a toilet with your own hands, it is done on tiles step by step, so after carefully watching the video tutorial, we will easily learn how to install a toilet correctly.

• The video begins with a story on how to install corrugation on a toilet. We can start the same way or change the order a little.
• The video indicates that you need to measure the dimensions of the room in order to install the toilet exactly in the middle. This concerns separate bathroom. If you have a combined bathroom, before installing the toilet on the tiles, we need to first place it the way it will stand in the room.
• We install the toilet on the tile, place it against the wall, trace the base with a pencil, as can be seen from the video tutorial on how to install the toilet on the tile. We mark the fastening holes in the same way.
• We turn it over and inspect the toilet.
• In places where holes will be drilled, you need to make notches so that the drill does not play on the tile and damage it.
• We fix the drill required diameter into the hammer drill and start drilling first in the non-impact mode. Only after the tiles have been completely drilled can the impact mode be used on the concrete floor.
• Insert the dowels and drive in the screws.
• We install the toilet with our own hands, thread the plastic gaskets and tighten the bolts.

Connecting the toilet to the sewer yourself

Once done reliable fastening, you can proceed to connecting the toilet to the sewer system step by step:

1. First you need to install a corrugated or plastic adapter pipe with a slope of 45 degrees. The edges of the corrugation can be pre-coated with silicone grease for trouble-free installation. If the corrugation is located slightly to the side relative to the socket of the sewer pipe, it is necessary to connect the toilet to the sewer with an eccentric. Any gaps or irregularities between the corrugation and the riser can be corrected using FUM tape with your own hands.
2. Connecting the drain tank. We place the flush tank on the toilet bowl, having previously placed sealing gaskets in the places where the water hoses are connected.
3. We connect the flexible hose with one end to the entrance to the drain tank, and the other to the water outlet, as shown in the video.
4. Check the connection of the toilet to the sewer riser for leaks.
5. You can seal the base of the toilet with silicone sealant.

When connecting the toilet, special attention should be paid metal parts, such as fasteners, screws and bolts. Over time, moisture can cause them to become covered with a layer of rust, which is neither aesthetically pleasing nor practical. It will be difficult for you to unwind them if necessary. Therefore, pre-treat them with grease or other lubricant.

One of the controversial issues is the installation and connection of a toilet to a sewer in a wooden house. In fact, innovative waterproofing methods make it easy to furnish rooms high humidity in a wooden house. You can treat the walls of the bathroom and other rooms wooden house special water-repellent agents and are not afraid of wood swelling.

Another feature of a wooden house is that it shrinks several years after construction. To prevent this, the floor under the toilet in the bathroom of a wooden house should be additionally reinforced with reliable structures.

Installation cost

If it is necessary to replace or properly install a toilet, the first thing that interests us is how much it costs to install a toilet. Cost of installing a toilet experienced craftsman in the capital is at least 1,500 rubles. This does not include the cost Supplies– screws, corrugations, lubricants and the cost of dismantling if necessary.

You will have to buy them in any case, but if we have all the necessary tools for installing and connecting the toilet to the sewer, then the cost of all work is reduced by exactly the cost of ordering a qualified technician. You can perform many toilet installation operations for free, if, of course, you do this yourself.

Video tutorial on installing a toilet

To consolidate everything you’ve read and clearly see how to install a toilet with your own hands, you can watch the video tutorial.

Conventional floor-mounted toilets have been replaced by wall-hung structures that do not take up floor space and look more modern. It is not surprising that wall-mounted models have begun to push traditional products out of the market. Installation of a suspended structure is more difficult, takes longer and costs more, but you can save money if you consider such an option as installing a suspended structure wall-mounted toilet with your own hands.

Internal structure and principle of operation of the design

If you look into design features products, it becomes clear how to install a wall-mounted toilet.

The design of the wall-mounted product is such that the only visible element is the toilet bowl

The first element is a strong steel frame, which is the base to which the visible part of the structure is attached - the toilet bowl. It is with its installation that the installation of a wall-hung toilet begins. The frame is securely fixed to the wall and also fixed to the floor - as a result, it must withstand the weight of a heavy person.

Accordingly, it is unacceptable to install this structure on weak walls (for example, made of plasterboard), since the wall simply will not hold up. The frame is equipped with a device that allows you to adjust the height (400-430 mm) at which the product bowl is mounted. It is suspended from the frame using special pins - this is the main fastening of the wall-hung toilet.

Often two installations are installed simultaneously - for the toilet and for the bidet

The second element is a plastic cistern hidden in the wall. Its shape differs from the traditional one, since the container must fit into narrow design. It is mounted in a steel frame and insulated special material, eliminating the appearance of condensation - styropol. The front wall of the tank is equipped with a cutout for mounting a release button device. In case of repair, this cutout is also used. Almost all modern tanks require dosing of drainage: for example, the volume of water discharged can be 3 liters or 6 liters, depending on the purpose.

Flush tanks of a flat configuration are fixed inside the installation

The third element is the toilet bowl, the only visible and actively used structural part. Its shape is traditional, oval, although designer models come in both round and rectangular configurations.

The toilet bowl can be rectangular, or even round shape- it all depends on the designer’s imagination and the client’s desires

There should be no problems with fasteners, since the product comes with a set of necessary details and tools and installation instructions. Sometimes it is necessary to additionally purchase Teflon tape, a polyethylene outlet, a flexible hose, and studs.

Installation technology

Installing a wall-hung toilet using a special frame installed in the wall is more expensive, but more reliable and faster.

The installation must be mounted to the floor and main wall

Installation steps:

Installation of a steel frame - through special holes it is attached to the main wall and floor using dowels. At the installation site, sewerage and water pipe. The frame (installation) should be checked for evenness using a level. It must be clearly parallel to the wall to which it is attached. At this stage, the installation height of the wall-hung toilet is also set - 40-43 cm. It depends on the height of the apartment owners.

The height of the toilet bowl is adjustable during installation

Water supply to the tank. It can be flexible or rigid. Experts insist on the hard version, as it lasts much longer. While the liner is being installed, the valve in the tank is closed.

During work, the water drain from the tank should be shut off.

Connecting the toilet to the sewerage system. The toilet outlet is inserted into sewer outlet, secure the connection using corrugations. After installation, it is necessary to test the system - do a test drain. To do this, the toilet bowl is temporarily completely screwed to the frame. It is then removed again, as it is usually installed at the final stage.

Many installation kits are connected to a sewer pipe without the use of corrugations

Covering the work area with sheets of plasterboard. For plumbing unit choose sheets of waterproof double plasterboard, which is stronger than regular plasterboard. The panels are mounted to the frame and metal profile, which is mounted on the wall. The instructions included with the product include detailed diagram cutting material with cutout points required holes. There can be two options for covering: for the entire wall area or just to cover the installation. In the second case, an improvised shelf will appear above the toilet bowl.

An improvised shelf above the toilet and bidet can be used for decoration or necessary things

Partition cladding ceramic tiles or panels similar finishing material bathroom.

The wall cladding behind the toilet should be in harmony with the rest of the room’s decoration

The final stage is the installation of a wall-mounted toilet, specifically its bowl. It is hung on the allocated part steel frame using two pins.

Sheets of plasterboard with lining cover the installation and the flush cistern, leaving the toilet bowl and flush button

Particular attention should be paid correct installation installation, since the correct execution of subsequent work depends on it.

Installation of a toilet without installation, on a concrete base

Sometimes people are interested in how to install a wall-hung toilet without installation. Of course, installing a toilet on a frame can be replaced with a cheaper option - installing it on a self-made concrete base.

The flush cistern is installed in two ways: either mounted in the wall with flush buttons, or placed in a standard manner above the toilet bowl in a manufactured base.

Wall-mounted toilet mounting diagram: 1 - 2 rods mounted in the wall; 2 - monolithic concrete base; 3 - drain pipe

Let's consider the most economical option.

To install you need to prepare:

• about 40 liters of M200 concrete;
• boards for formwork;
• nuts, washers, wood screws;
• 2 threaded rods 2 cm thick (length from 50 to 80 cm);
• a piece of plastic pipe (length – 8 cm or more, diameter – 11 cm);
• drain coupling;
• silicone sealant.

Procedure:

They start by securing the rods in the main wall. In the future, the toilet bowl will be “planted” on the outlets of the rods. The result is a fairly stable structure that can withstand a weight of 400-500 kg.

Dimensions concrete base calculated taking into account further dismantling of the formwork

Install the formwork. Calculate the distance between the holes for fasteners and mark the fastening points on the formwork.

Calculate the length of the rods: sum up the thickness of the recess (about 15 cm), the distance from the toilet bowl to the wall. To fix the rods in the wall, a chemical anchor is used - a special glue for concrete.

After installing the pins and installing the formwork, try on the toilet bowl. The holes for fastening must coincide with the outlets, the outlet hole must coincide with the outlet of the coupling.

The concrete base will finally harden only after 2-3 weeks.

Concreting begins, supporting the drain hole with foam. The result is a monolithic block with a fixed open coupling and protruding pins.

The concrete base should include pins for the toilet bowl, a coupling outlet for the flush and space at the top for mounting a cistern.

There is no need to think about how to install a wall-mounted toilet on a prepared base - the subsequent steps are no different from installing a conventional one floor-standing toilet: connect the drain, seal the connections, install the bowl on the pins, tighten the nuts. The flush cistern is fixed above the toilet bowl.

The concrete base and drain pipe can be covered with sheets of plasterboard, leaving an opening for access to the drain tank

Installing a wall-hung toilet like this yourself will save the family budget, since expensive installation is not required.