To connect plumbing fixtures to the water supply network, a flexible water supply is used. It is in demand when connecting faucets, showers, toilets and other water intake points, and significantly simplifies the installation process. Flexible eyeliner also used during installation gas equipment. It differs from similar water devices in its manufacturing technology and special safety requirements.

Characteristics and types

The flexible hose for connecting plumbing is a hose of different lengths made of non-toxic synthetic rubber. Thanks to the elasticity and softness of the material, it easily takes the desired position and allows installation in hard to reach places. To protect the flexible hose, there is an upper reinforcing layer in the form of a braid, which is made from the following materials:

• Aluminum. Such models can withstand no more than +80 °C and retain functionality for 3 years. At high humidity Aluminum braiding is prone to rust.
• Of stainless steel. Thanks to this reinforcing layer, the service life of the flexible water line is at least 10 years, and Maximum temperature transported medium - +95 °C.
• Nylon. This braid is used for the manufacture of reinforced models that can withstand temperatures up to +110 °C and are designed for intensive use for 15 years.

The fasteners used are nut-nut and nut-fitting pairs, which are made of brass or of stainless steel. Devices with different indicators permissible temperature differ in the color of the braid. Blue ones are used for connecting to a pipeline with cold water, and red ones - with hot ones.

When choosing a water line, you need to pay attention to its elasticity, reliability of fasteners and purpose. It is also mandatory to have a certificate that prevents the rubber from releasing toxic components during operation.

Features of gas connections

When connected gas stoves, speakers and other types of equipment also use flexible hoses. Unlike models for water, they have yellow and are not tested for environmental safety. For fixation, end steel or aluminum reinforcement is used. There are the following types of devices for connecting gas appliances:

• PVC hoses reinforced with polyester thread;
• made of synthetic rubber with stainless steel braid;
• bellows, made in the form of a corrugated stainless steel tube.

Santekhkomplekt holding offers engineering equipment, fittings, plumbing and devices for connecting it to communications. The assortment is represented by products and materials from famous foreign and domestic producers. Discounts apply for bulk purchases, and product quality is confirmed by standard certificates. For information support and assistance, each client is assigned a personal manager. The ability to arrange delivery within Moscow and to other regions of the Russian Federation allows you to quickly receive the purchased goods without unnecessary hassle.

Drainage is a drainage and drainage measure to remove excess groundwater.

If water does not leave the site for a long time, the soil becomes gleyed, if shrubs and trees quickly disappear (get wet), you need to urgently take action and drain the site.

Causes of soil waterlogging

There are several reasons for soil waterlogging:

• clay heavy soil structure with poor water permeability;
• aquifer in the form of gray-green and red-brown clays is located close to the surface;
• high groundwater table;
• technogenic factors (construction of roads, pipelines, various objects) that interfere with natural drainage;
• disruption of the water balance by the construction of irrigation systems;
• The landscape area is located in a lowland, ravine, or hollow. In this case, precipitation and the influx of water from higher places play a big role.

What are the consequences of excess moisture in the soil?

You can see the results of this phenomenon yourself - trees and shrubs die. Why is this happening?

• the oxygen content in the soil decreases and the carbon dioxide content increases, which leads to disruption of air exchange processes, water regime and nutritional regime in the soil;
• oxygen starvation of the root-forming layer occurs, which leads to the death of plant roots;
• the supply of macro and microelements by plants (nitrogen, phosphorus, potassium, etc.) is disrupted, because excess water washes out mobile forms of elements from the soil, and they become unavailable for absorption;
• intensive breakdown of proteins occurs and, accordingly, the processes of decay are activated.

Plants can tell you at what level groundwater lies

Take a close look at the flora of your area. The species inhabiting it will tell you at what depth the ground water layers are located:

• perched water - it is best to dig a reservoir in this place;
• at a depth of up to 0.5 m - marigold, horsetails, varieties of sedges grow - bladderwrack, holly, foxweed, Langsdorff's reed;
• at a depth of 0.5 m to 1 m - meadowsweet, canary grass, ;
• from 1 m to 1.5 m – favorable conditions for meadow fescue, bluegrass, mouse pea, china;
• from 1.5 m - wheatgrass, clover, wormwood, plantain.

What is important to know when planning site drainage

Each group of plants has its own moisture needs:

• at a groundwater depth of 0.5 to 1 m they can grow on raised beds vegetables and annual flowers;
• water depth up to 1.5 m is well tolerated vegetable crops, cereals, annuals and perennials (flowers), ornamental and fruit and berry bushes, trees on a dwarf rootstock;
• if the groundwater is more than 2 m deep, fruit trees can be grown;
• optimal depth of groundwater for Agriculture– from 3.5 m.

Is site drainage necessary?

Record your observations for at least some time. You yourself can understand how much drainage is needed.

Maybe it makes sense to simply redirect melt and sediment water along the bypass channel, rather than allowing it to flow through your site?

Perhaps it is necessary to design and equip a storm drain and improve the composition of the soil and this will be enough?

Or is it worth doing drainage system only for fruit and ornamental trees?

A specialist will give you the exact answer, and we strongly recommend calling him. But after reading this article, you will gain some awareness on this issue.

Upon completion of technological and production tasks related to the arrangement sewer system V apartment building, industrial building, and also in private households it is required to test the involved system using the forced flow method. This task is used to identify possible defects or incorrect installation of the entire involved sewer part and a system testing report internal sewerage and drains will be material evidence of the work on acceptance of the object.

A visual inspection must be accompanied by inclusion in the test report of internal sewerage and drainage systems according to SNIP, which is currently represented by the current regulations of the “D” series appendix, which corresponds to SP 73.13330.2012 “Internal sanitary systems of a building”, in Lately the new updated working edition according to SNiP 3.05.01-85 is applicable.

Among the many models of interior doors produced by manufacturers in a wide range, it is not difficult to find an option for the bathroom. You can choose and install a door made of solid wood or MDF, as well as a laminated, glass or veneered model with a varnish coating.

When choosing a door for a bathroom, many buyers assume that the door will be exposed to moisture. However, in a well-ventilated bathroom this problem should not exist, so there are no restrictions when choosing door frame and you don’t have to adhere to the canvas.

What exactly you should be guided by is the size of the doorway. If the door you like does not fit into the existing opening in size, then it is widened. It is not particularly difficult to narrow the doorway to fit the dimensions of the purchased door. Typically, the width of doors made for bathrooms is 60 cm.

If ready-made options door panels are not satisfactory to the buyer, then you can always order the production of the design the right size and design in workshops specializing in this type of service. If the customer himself is not able to carry out the installation himself, then the craftsmen can do this too. At the same time, they do not have to explain to the customer how to install the door to the bathroom so that there are no further problems when using the room.

If the walls are made of brick, then first begin by removing the nails connecting the old door frame with the wooden inserts fixed in interior partition. If this is not done, a large fragment of plaster may fall off when the structure is pulled out of the opening.

To make it easier to pick up the nails with a nail puller or pliers, you need to cut out small depressions in the block around the heads with a chisel. After removing the nails, one of the vertical bars of the box is sawn in half. This operation makes it easier to dismantle the structure without damaging the plastered walls of the doorway.

Removing the old door wooden box carried out with maximum care, using nail pullers and other auxiliary tools

When dismantling old metal door frames, found in houses with improved layouts, they follow a different algorithm. First, the pins are cut off, with the help of which the box is attached to the reinforcement in the reinforced concrete wall.

After this, the structure is removed with a small crowbar or nail puller inserted between the frame and the concrete opening. In this case, of course, you will have to make a considerable physical effort.

How to measure a doorway correctly?

To install doors in a bathroom or other room without much hassle, you need to accurately measure the height, width and depth of the doorway. For this:

• dismantle the old door frame;
• clean the side of the partition wall down to the bricks;
• clean up construction garbage from the floor;
• use a tape measure to measure the width of the opening between the bricks;
• take into account the thickness of the finish when measuring the depth of the opening;
• determine the height of the door, paying attention to the presence or absence of a threshold;
• lay 15 mm for free placement of the door frame in the opening;
• calculate the dimensions of the canvas taking into account the distance from the box equal to 3-5 mm.

If you have already purchased a bathroom door and its dimensions do not allow installation in an existing doorway, you will have to expand the space. In this case, they follow the reverse algorithm, starting with measurements of the door frame.

Standard measurements of the dimensions of the doorway provided for the entrance to the bathroom or other room in the apartment

Preparing the doorway for door installation

After dismantling the old door frame, it is necessary to prepare the concrete or brick opening for the installation of a new structure. To do this, align internal surfaces, remove excess concrete with a hammer drill. Special attention At this stage, they pay attention to aligning the corners of the opening. According to the standard height of all doorways should be 2000 mm, and the width can vary from 600 to 900 mm.

When estimating the dimensions of the frame, they take into account the width/length of the door leaf, the double thickness of the vertical/horizontal beam, as well as setting the gap and adjusting the position of the door (20-30 mm).

Assembling the door frame for the bathroom is carried out using a lightweight version - without filing the edges of the vertical and horizontal bars at angles of 45 degrees

Required tools and supplies

For installation work To install the door frame and attach the door leaf to it using awnings, you will need to stock up on a certain set of tools:

• drill;
• chisel;
• hacksaw;
• tape measure;
• level;
• screwdriver;
• pencil.

In addition to a set of tools for installing an interior door to a bathroom, you will need dowels, self-tapping screws, wooden wedges, and polyurethane foam.

Assembly and installation of the door frame

You can skip this stage of installing bathroom doors if you purchase door leaf with a ready-made (assembled) box. This option of purchasing a door will cost more for the consumer, but installation will be simplified and the time required for its implementation will be reduced.

Many apartment owners who started redecorating in the bathroom, they buy a door leaf that matches the design of the already installed interior doors, and assemble the frame themselves from pre-purchased bars. In this case, you have to saw off the parts of the required size from the block and fasten them together with self-tapping screws so that you get a rectangular frame. The sides of the frame must not be allowed to skew, otherwise the door leaf will fit into it unevenly, forming gaps of uneven size, which, in turn, will lead to difficult opening and closing of the door.

To get perfectly right angles for a door frame, when assembling its individual elements, you need to measure the diagonals of the resulting frame. From a school geometry course we know that a rectangle has equal diagonals. This simple way to obtain right angles in practice without the use of special measuring instruments has long been used by carpenters, welders and representatives of other technical professions.

Another (more complex) option for connecting the vertical and horizontal bars of the door frame, which requires more skill from the installer

At self-assembly The craftsman manages to very accurately adjust the dimensions of the box to the doorway. After all, individual parts are cut with a hacksaw until the structure fits perfectly into the space allocated for it. Although when precise measurement the size of the opening, you can get the parts for the perfect assembly of the door frame the first time.

Of course, you can also remove a few extra millimeters from the door leaf by trimming its sides a little. But it is undesirable to do this, and in some cases it is simply impossible (for example, glass doors). That’s why experienced craftsmen assemble the door frame so carefully.

When fastening the box parts laid out on the floor with self-tapping screws, try to prevent the wood from cracking. To do this, small holes are drilled into one of the parts in the marked places with a wood drill, the diameter of which is 2-3 mm. Then insert self-tapping screws into the holes and tighten the parts together.

There are other ways to connect individual parts of a door frame:

• gluing, in which special grooves are cut out at the ends of the bars;
• use of perforated metal corners, produced specifically for these purposes.

The assembled box is inserted into the prepared opening, using dowel-nails with plastic spacers for fastening to brick or concrete, which significantly increases the density of the connection. But this is done after the hinges are inserted and the position of the box and the canvas is adjusted.

Installation of door leaf

After completing the assembly of the door frame, proceed to next stage, during which the door itself or the door leaf is installed. The door is attached to the frame using detachable hinges, which are:

• left;
• right;
• universal.

On interior doors Usually two hinges are installed: on top and bottom at a distance of 200 mm from the corresponding boundaries of the door leaf. First, the hinges are applied to the end of the door, circled with a simple pencil or a marker. Using a chisel, select a layer of wood, the thickness of which depends on the thickness of the hinge plate. At the same time, they do not go beyond the drawn contours of the landing socket.

Then the door leaf is placed in a box and the attachment points are marked metal hinges. Wood is also excavated along the intended contour to accommodate the hinge. Then the hinges are screwed to the frame and door leaf, adjusting their position experimentally. Afterwards, all that remains is to put the loops on top of each other, and the canvas hangs freely on the box, easily opening and closing. The doors that come with the frame already have holes for the hinges, so you don't have to use a chisel.

Marking the contour of the seat for the detachable hinge is carried out at the stage of fitting the door leaf to the frame, after which the part is fastened with self-tapping screws

Step-by-step installation of a door structure in an opening

We adhere to the following order:

• Place the finished frame in the doorway, aligning its position with building level and wooden wedges.
• Drill 3-4 holes on each side of the box and mark their projections on the walls.
• Remove the box to make holes in the partition in the designated places using a concrete drill.
• Insert dowels into the drilled recesses.
• Place the door frame in place, securing its position with self-tapping screws, which you screw with a screwdriver into the sealing dowels installed in the walls. Instead of dowel-nails, you can use hangers for metal profiles to fasten the box, which are used when installing drywall.
• Pen it up free space formed between the elements of the box and the walls of the doorway, polyurethane foam, moving from bottom to top.

Advice - dose the foam supply in such a way that the filler, which increases in volume, does not extend beyond the opening. After half an hour, cut off the excess hardened foam with a stationery knife.

Installation of the door frame in the opening is carried out using a plumb line, along which the vertical position of the structure is adjusted and its temporary fixation with wedges

Finishing the doorway with platbands

The doorway on both sides along the perimeter is decorated with platbands that cover the junction of the frame and the wall. Before this, the wedges used to level the position of the box are sawed off, and the mounting foam is also cut off, if this has not been done previously.

Filling the space with industrial foam that does not increase much in volume when drying. This is important because the foam can push out the box, displacing its position

When exposing the casing, make sure that on the hinge side it does not touch the hinges, for which purpose maintain an indentation of 3-4 mm. The platband installed on the lock side must have a gap with the door leaf, otherwise it will prevent it from opening freely. There are two ways to attach trim to the frame and wall, based on use:

• liquid nails (gluing);
• finishing nails (nailing decorative parts to the frame bars).

Sometimes these methods are combined, which makes it possible to better secure the platbands on uneven walls, as well as eliminate the small gaps that form in this case between two non-contacting surfaces. In platbands made of MDF, holes are drilled with a thin drill for finishing nails. Otherwise, they may not be driven into this durable material.

Experienced craftsmen advise starting the installation of platbands with the top element, cut at both ends at an angle of 45 degrees. After this, it is more convenient to place the vertical trims one by one, lowering their lower edges to the floor level.

Installation of additional strips and decorative trims allows you to beautifully decorate a doorway with an inserted frame, hiding all the subtleties of installation

Extensions: what is it and how are they installed?

Extensions are special strips that are used for finishing wide doorways, not completely covered by the box. Most often, you have to use extensions when installing doors to a bathroom, separated from other rooms by an internal main wall.

Additional panels or strips are available in different sizes And color solutions, which allows you to choose the right one decorative element under any opening.

Previously, this issue was resolved by plastering the surface of the opening with further painting or wallpapering. The additions not only made the process of finishing doorways easier, but also significantly increased the attractiveness of the apartment’s interior.

The additional strips are attached to the walls using self-tapping screws, screwed into holes made with special tools. The space created when leveling the position of the additional planks between them and the wall is filled pointwise with mounting foam.

Installation of a door threshold in the bathroom is necessary, since in this room a lower floor position must be provided in case of emergency flooding of the bathroom

Final touches - setting the threshold

The door frame in the opening leading to the bathroom must be mounted with a threshold (bottom bar). This is a mandatory requirement for bathrooms and balconies. It is better to install other interior doors without thresholds, so as not to create unnecessary interference when moving from one room to another.

When installing such doors, the threshold is a temporary block, which is removed after the door installation process is completed. But this does not apply to the bathroom door.

As you can see, installing a door to a bathroom has many nuances, without knowing which you can damage the product or make its operation unbearable. Creaking doors, self-closing, jamming, poorly fitting...

The list of defects associated with improper installation may be extended. Therefore, it is still necessary for people who are confident in their abilities to install the door themselves. If there is even the slightest doubt about the success of the upcoming installation, then it is better not to start work, but to entrust it to professionals.

The installation of door structures in sanitary facilities has some peculiarities. They should definitely be taken into account by home craftsmen who decide to carry out such installation work themselves.

Doors to the bathroom and toilet - choosing the right ones

Door products for sanitary facilities are used in conditions of high humidity. Their choice is made taking this fact into account. We need to purchase a design that will be sufficiently resistant to water and hot steam. In addition, it is advisable to select doors with good sound and thermal insulation.

Products made from the following materials meet these requirements:

• Plastic. PVC doors do not deform under the influence of moisture, have an affordable price, provide the proper level of noise and heat insulation, and are available in various designs. It is easy for consumers to choose a design for a bathroom or toilet with any decorative features.
• Glass. Ideal material for doors to sanitary facilities. Such designs are environmentally friendly and durable. Now they are made of high-strength glass, which eliminates the risk of the door breaking. Visually, these products look great.
• Wood. Wooden doors- a classic loved by many. But experts do not recommend installing such structures in toilets and bathrooms. Wood is prone to destruction and deformation due to temperature changes and high humidity. In sanitary premises it is allowed to install doors with special impregnation, which are additionally coated with several layers of antiseptic and varnish. This naturally increases the cost of the products.
• MDF, chipboard. Fiberboards and particle boards are an alternative to doors made of natural wood. Their price is minimal, and appearance quite attractive. True, the durability of structures made from MDF and chipboard leaves much to be desired.

Having selected the required type of product based on material, select its specific model, focusing on the dimensions of the doorway. You will need to measure the length, width and depth of the latter in advance. Select the door leaf based on the available dimensions. Don’t forget that in addition to this, you also need to purchase a door frame. In most cases, it is not included in the door kit and is made in the form of three separate elements (plates). One of them is cut into two halves during installation, corresponding to the width of the doorway. And the two remaining plates are cut according to the height of the last one.

We install the box - there will be no difficulties!

Do-it-yourself door frame installation is carried out according to a clear scheme. First, cut the side posts to the required height.

Important point! The height of these elements should be 5 mm more sizes opening. This is due to the fact that bathroom doors must be installed with a mandatory gap between the door leaf and the frame. Let's explain with an example. If the height of the hole is 2000 mm ( standard size), the size of the racks is taken to be 2005 mm.

1. 1. Cut the bottom and top of the tray by 600 mm, taking into account the thickness of the box profile multiplied by two. Don't forget to leave 5mm for gaps!
2. 2. We cut the profile (make a cross cut) to the thickness of the slug. Nuance. Measurements should be taken on the widest area.
3. 3. Remove unnecessary sections of the profile along the bottom of the box. This part serves as a vestibule for door design.
4. 4. At a distance of 0.2–0.25 m from the edges of the door, we install the canopies. They can be placed on the right or left side. Instead of canopies, it is allowed to use hinges. There is no need to cut them in. Therefore, the pros advise self-taught craftsmen to use loops.

The box is ready. We just need to assemble it into one structure. It is more convenient to perform this operation on flat surface, for example, on the floor. And then mount the assembled product in the place intended for it.

Preparing and installing a door - step-by-step guide

You need to cut the latches into the door leaf and install the handle. We take a drill and make a hole at the end of the door structure. Its depth should correspond to the length of the latch that we will install in the door. Then use a feather drill to make a hole for the handle. Important! The operation is performed on both sides with the obligatory determination of alignment. We install the latch and secure it with self-tapping screws. Then we mount the handles:

• insert one of them into the square, fasten it with a small screw (it is included in the kit);
• thread it into the prepared connector mounting element, fix the latter on the door leaf;
• put the second handle on reverse side per square.

Now installing properly prepared doors to the bathroom and toilet will not take much time. We install the box into the opening and fill all existing gaps with foam. The procedure will ensure the required tightness of the structure and its high heat and sound insulation characteristics. After blowing, you need to place 2-4 wooden spacers in the opening and wait 8-10 hours. Used by us installation material will expand.

You must wait until the foam has completely dried.

Then during operation there will be no problems with closing and opening the door. All we have to do is hang the canvas. It's a matter of one minute.

Last tip. If you want a normal microclimate in the toilet or bathroom, you need to embed a ventilation grill into the door leaf. This device costs a penny, but it has a lot of benefits. The grate will provide an influx fresh air to the sanitary room and its high-quality ventilation. Due to this, the bathroom decoration will retain its original appearance for a long time, and the door itself will be used for a really long time.

While planning to renovate your bathroom, you decide to install a new door. To perform high-quality assembly and installation, we suggest that you familiarize yourself with the following materials.

Basics

From the video you will learn how to correctly position the door frame, where it is necessary to make fastenings and how to firmly fix the new door.

Installation process

In the following video, a specialist shows the sequence of installing a bathroom door directly in trading floor supermarket. All the intricacies of a high-quality installation are explained in detail.

Foaming the door frame

Sometimes during installation new door foaming of the door frame is required. You will learn how to do this correctly from the third video of our article. The presenter gives several useful tips on foaming the door frame.

A little about choosing a door

The time has come to talk about choosing a door. From the video you will learn the basic requirements for doors, how to choose the right hinges for doors. In addition, you will hear about the classification of doors by material, functional purpose, about the disadvantages and advantages of this or that type of door.

Despite the apparent simplicity, installing doors to the bathroom and toilet requires the master to have special skills and understand the principles of operation of the entire structure.

Many apartment owners install bathroom doors with their own hands. This not only allows them to save money, but also gives them the opportunity to do everything in accordance with regulations, ensuring high quality executed works.

Having decided to do everything with his own hands, the master chooses the option:

• purchase of a ready-made door block;
• purchase of materials and subsequent production of the product.

In order to independently process blanks and assemble a structure from parts as a whole, you need not only experience in carpentry, but also a workshop with equipment. Most of the inhabitants apartment buildings Dont Have utility rooms or access to special equipment. Therefore, experts recommend buying ready-made entrance group.

This will make installing a bathroom door a simple and easy task.

Experts point out that the design must meet a number of mandatory requirements:

1. be resistant to moisture;
2. do not let in odors;
3. aesthetically match the design of the room.

When going in search of a replacement for existing doors, apartment owners must decide in advance on the type of opening: swing or sliding.

IN small apartment most a good decision there will be plastic ones sliding structures. And where the area allows you to save on space, you can install traditional swing doors.

Selection and purchase of materials

Today manufacturers offer big choice types and models of interior groups. For their manufacture the following materials are used:

• tree;
• plastic;
• metal;
• glass.

For metal doors use aluminum and alloys based on it. They are lightweight, non-corrosive, and do not require special care. Metal-plastic options with double-glazed windows are popular.

Wood for products of this kind is prepared and treated with special compounds. They prevent moisture from penetrating into the structure of the material and prevent the wood from swelling and deforming.

The plastics chosen are polystyrene, acrylic, and other varieties, including combination combinations.

According to the type of construction, doors can be solid (with a solid leaf) or with window openings. The presence of openings serves additional source light, which makes it possible to save energy by not turning on the lamps every time you visit the bathroom and toilet room.

Understanding what material the structure will be made of, you can more easily calculate how to install the door to the bathroom. Wooden parts require one set of tools, metal ones require another.

Experienced craftsmen It is advised to buy a ready-made structure and fasteners in one place. Thanks to this, all the elements will match, there will be no need to redo anything or adapt existing fasteners.

Dismantling

Before installing bathroom doors begins, you must carefully remove the old structure. Handles and locks are first removed from the sashes so that they do not interfere with work. The process consists of three stages:

1. dismantling the canvas;
2. removal of platbands;
3. dismantling the box.

To perform the first operation, you can use any lever, even the handle of a hammer. Having slipped it under the bottom edge of the door, it is lifted, removing it from its hinges. It is advisable to have an assistant who will hold the canvas.

If the hinges are one-piece, then you need to unscrew the fasteners from the jamb (self-tapping screws, bolts, screws) and remove the sash.

Then the platbands are carefully separated from the frame of the bathroom doors. If they are fastened with self-tapping screws, then the parts are unscrewed with an appropriate screwdriver or screwdriver. The nailed nails are carefully pryed up with a nail puller and removed.

It is important not to damage the walls, since a frame of a different design will be attached to them.

Preparation

After removing the old structure, the replacement of doors in the bathroom and toilet begins. To perform the work efficiently, you need to stock up on everything necessary tools. If the process involves dismantling walls, you need to prepare a mixture to seal holes and cracks.

Replacing a door is a labor-intensive task, so it is recommended to have one or two helpers. The number of participants in the operation depends on the material from which the canvas is made. Light plastic can be handled by two people. And made from solid solid wood It is better to install the structure with three people, protecting each other.

If a power tool is used during work, you need carriers the length of which will ensure comfortable work.

You should also pay attention to the quality of lighting. Often the vestibule where the entrance to the bathroom is located is dark. Therefore, you will need a good directional light source, the position of which can be changed at different stages of work.

Medical supplies in case of injury will also be useful: a bandage, iodine or brilliant green, hydrogen peroxide and a plaster.

Required materials and tools

In order to install a bathroom door yourself, the master will need a set of tools:

• a simple hammer with a rubber head;
• pliers;
• universal screwdriver with a set of feathers;
• screwdriver;
• chisel;
• hacksaw (for wood or metal);
• construction knife.

To measure and level the structure you will need:

1. roulette;
2. level;
3. plumb line;
4. simple pencil.

Approximate markup

It is better not to use a marker; it is difficult to remove.

To change the doors of the bathroom, the technician also needs foam, ready mortar and silicone seal. Rubber inserts are also useful, with which you can provide waterproofing of the room. To level the structure, plastic or wooden wedges are needed. It is recommended to cook in sufficient quantity fasteners, screws and anchors. It is better to buy them with a reserve.

Preparing the opening of the box and canvas

The installation of toilet and bathroom doors begins with cleaning and leveling the sections of the wall to which the frame is attached. Its dimensions are selected to match the dimensions of the opening, so it is important not to damage anything when dismantling the old structure.

Preparing a doorway involves cleaning the walls of any remaining wallpaper, paint, etc. finishing materials. If installation is carried out after repair, then it is recommended to stick self-adhesive paper tape along the edges of the trim along the opening ( masking tape).

Old fasteners are removed from the walls and holes are sealed with cement. Voids are places where moisture accumulates. To prevent fungus or mold from growing in them, a layer of waterproofing tape is fixed on top of the concrete or brick.

At this point, preparation for installation work is completed. You can move on to the next phase to install the door group.

Assembly and installation

To learn how to properly install a bathroom door, you can watch a special training video and instructions with photos. It will help you understand the entire sequence of operations, which will speed up the process and avoid common mistakes.

First you need to check all parts of the box so that they are securely attached to each other. After all, installing bathroom doors begins with installing the frame.

Installation of the box in the opening and fastening of the canvas

If ordered ready door block, the sash must be removed from its hinges and separated from the frame. After this, the box is inserted into the opening and its alignment begins. Using a level and a plumb line, compliance is achieved with respect to the coordinate axes of the building. Fixation of a given position is achieved using wedges. Then the parameters are checked again horizontally and vertically. Depending on the thickness of the box profile, spaces and cracks are covered.

After this, the doors to the bath and toilet are installed. Together with an assistant, the canvas is hung on the box. It is checked whether opening and closing occurs normally, whether there are any distortions and whether the locks work. If necessary, let the door stand for a while so that it settles. Afterwards the functionality is checked again.

To avoid distortion, the door hinges should be placed tightly on top of each other. Before fastening them inside, they are lubricated with plastic waterproof lubricants (solid oil, graphite grease), which will ensure long-term operation.

Installation procedure for doors made of wood and glass

The process has a number of features related to the weight of the structure and safety measures. The frame is given some time to stand and the sealant (spray foam) hardens. Only after this is the canvas hung in the toilet and bathroom.

Glass door into the bathroom, despite the fact that it is made of impact-resistant glass, it needs protection. Therefore, it must be kept aside while the box is being assembled. It is advisable to protect the surface from impacts and scratches with cardboard.

It is also necessary to protect the tree, which is problematic to restore.

DIY

Having an idea of ​​the sequence of processes, the master knows almost everything about how to install a bathroom door with his own hands. The main thing is to stock up the right tool And required quantity fasteners.

To firmly secure the frame, first drill holes in it. Having placed it in the opening, they mark out places for holes in the wall. The box is removed and holes are made into which plastic plugs are inserted. Then the operation is repeated, screwing in self-tapping screws or anchors to securely fasten the doors to the bathroom.

After checking the functionality of the structure, we move on to the fittings. You can place the handle on a protruding square, which will protect the technological holes in the material from moisture.

Foaming technology

At the fastening stage, the bathroom block is treated with polyurethane foam. This is necessary to fill all possible voids and reliably isolate the room from moisture.

The polymer mass is applied along the height of the door, starting from the bottom and moving up. It is recommended to fill voids to a third of the volume. The foam will fill the rest itself, gradually expanding. And the master will have to fuss less, cutting off the frozen excess.

Experts note that bathroom doors should be hung only after the foam has completely dried. It lasts up to 10 hours, depending on the composition. The manufacturer reports the curing time on the foam packaging.

Only after this are the platbands attached or decorative panels, completing the installation process of the interior group.