Platbands play a decorative role, giving the doorway a finished look. The planks differ in the material of manufacture, shape, color, as well as the method of fastening. Installation of interior door frames is carried out after finishing the walls, but before laying the floor plinth.

To correctly install platbands on interior doors, you first need to select the appropriate elements. First of all, pay attention to the material of manufacture:

• Products made from natural wood are considered universal. The strips can be painted to match the color of the doors. Fasten wooden elements nails without heads. If the walls are well aligned with the door frame, the platbands are placed on an adhesive composition - “liquid nails”.

• Laminated planks of MDF appearance resembles natural wood. Decorative elements are matched to the color of the door. The platbands are secured with adhesive or nails without heads, having previously drilled blind holes.

• PVC cashing is more suitable for plastic doors. The planks are glued or mounted on the mounting profile.

• There are also aluminum and steel cashing, but they are usually placed on entrance doors.

Most planks are given a standard flat, rounded or shaped form.

By fastening method Cashing can be invoice or telescopic. The first type of elements is fixed directly to the door frame. The second one is equipped with mounting grooves.

Tools for work

To install door frames was successful, the instrument is prepared in advance.

• To perform accurate markings you will need pencil, tape measure, plumb line, square and level.
• It will help to cut the workpiece perfectly straight at an angle of 45 degrees. miter box O.
• It's better to cut the slats miter saw. If it is missing, you can use hacksaw for metal. The fine teeth of the blade will not leave chips on the product.
• Used for driving nails or tapping cash elements. hammer.

How to cut off the platband?

After marking the angle of the cut and the length of the workpiece, the trim is cut with a miter saw. A special feature of the power tool is adjustable table, which is installed under the right angle. In order to saw off the door frames correctly and without chipping, the side edges of the workpiece are pressed tightly against the stops on the frame. If a gap occurs, the cut will be uneven.

If you don’t have a power saw, a miter box will help you cut the edge of the casing at 45 degrees. It is better to buy a quality tool. The cheap one made of plastic has deformed thrust elements that distort the size of the angle. A hacksaw for cutting is used with fine teeth that do not leave chips.

How to attach platbands to interior doors?

Simple fastening of flat platbands is performed at an angle of 90 degrees. The vertical planks fit tightly at the top with the horizontal one. When installing wooden or MDF elements complex shape The ends are cut at an angle of 45 degrees. There are 4 methods of fixing the planks.

Using finishing nails

Wooden or MDF door casing is easier to nail with nails with flat heads. The fastening is reliable, and if necessary, the planks can be easily dismantled. You can use nails of a different configuration, and so that the heads are not visible, they are removed with side cutters. The length of finishing nails for platbands is about 40 mm. The size can be calculated individually, taking into account the thickness of the cash. Having passed through the bar, the nail must enter at least 20 mm into the body of the door frame.

Attachment points are marked on the workpieces, maintaining the same distance. Typically, a pitch of 500 mm is maintained. Using the markings, drill through holes with a diameter corresponding to the thickness of the nail. After joining to the door frame, the platbands are carefully nailed. For aesthetics, hats are painted over with a wax pencil.

Liquid nails

To attach cash to interior doors without nails, use an adhesive composition - liquid nails. The advantage of this method is that there is no visible fixation site. The downside is the weak fastening, as well as inconvenience during dismantling. In addition, liquid nails are only applicable if the adjacent walls are perfectly level.

The door frames are installed after sawing and fitting of the blanks. The plank is lubricated on the back side with adhesive and pressed tightly against the wall. To glue platbands for interior doors, it is enough to hold each strip pressed for no more than a minute.

Fastening with self-tapping screws

The method is similar to fastening with finishing nails, only instead of them, wood screws 25 mm long and 6 mm thick are used. Places for holes are marked on the workpiece in increments of 500 mm. A drill of the same diameter or with a margin of 1 mm is used.

It is advisable to recess the hats into the body of the plank. On the front side of the workpiece, the hole is expanded with a drill of a larger diameter to a depth of 1–1.5 mm. Now all that remains is to attach the trim to the interior doors with self-tapping screws. You need to tighten the hardware so that the head fits into the recess. The place of fixation is painted over with a wax pencil.

Attachment by beaks

The method does not require the use of screws, nails or adhesive. The cash box is equipped with a beak-shaped lock. The connecting pin is inserted into the recess on the box and pressed until it clicks.

The advantage of this method is ease of installation and invisibility of the mounting location. Negative point is the delamination of MDF trims during dismantling. Over time, spontaneous destruction of joints may occur, which requires additional processing connections with glue.

How to install platbands on interior doors?

When installing interior doors with your own hands, glue, nails or self-tapping screws are used to fasten trim made of wood or MDF. However, the evenness of the walls and the shape of the planks are taken into account. There should be no gaps at the joints. If the walls adjacent to the end of the door frame are uneven, then it is better to refuse gluing.

Installation of cashing begins from the side where the interior door opens. This is due to the presence of hinges that prevent the strip from being fixed flush with the box element. You will need to make the same indentation, and on all three sides for symmetry. Where there are no loops, there is no need for mandatory indentation.

If the door is in a corner, installation is carried out using the letter G. If desired, you can saw the element vertically and use a narrow strip.

The platband on one side is installed when the slopes on the other are decorated with tiles or other wall materials.

Docking at an angle of 45

When it is necessary to install trim on the door at an angle of 45 degrees, use a miter box for marking. This joining of elements is usually used for shaped and rounded planks. If there is no miter box, the markings can be made with a protractor.

The installation procedure consists of the following steps:

Docking at an angle of 90

The platbands are fastened at 90 degrees with horizontal or vertical seams. The choice depends on the preference of the owner. When installing a door cashing with your own hands at a right angle, only flat-shaped blanks are used. The cut areas are treated with varnish or acrylic-based paint.

To install platbands on interior doors with imitation lintels, the upper element is extended. The joining is obtained at an angle of 90 degrees with horizontal seams. The top bar extends beyond the vertical.

Telescopic trims

Fastened to interior doors without nails telescopic trims. Decorative elements are equipped with a special lock consisting of a slot and groove. Fixation occurs at the end of the box. The main requirement correct installation platbands is the presence of a protrusion. It forms when the door frame is already thick interior partition. The adjacent walls must be level, otherwise you will get an unsightly gap.

Installation instructions for plastic trims

Glue is used very rarely, the connection is unreliable. Basically, plastic trims are installed on interior doors using a profile. This installation method consists of the following steps:

If you place plastic cash on a wall lined with clapboard, then fix it around the perimeter of the doorway wooden slats, and the profile is already attached to it.

Installation is possible using special nipples and screws.

Elimination of defects

An unpleasant moment is the visibility of the nail head or screw. They are slightly recessed into the body of the cash, and sealed on top with sealant. desired color. You can use a wax corrector.

On uneven walls Due to the curvature of the wooden planks, the joints diverge. During installation, the joining elements are additionally connected with a finishing nail.

Wide strips from 100 to 120 mm help to hide large defects around the door frame.

How to join the plinth with the platband?

There is no need to cut the door trim; it should reach the floor. Otherwise it won't look very nice.

The plinth itself is adjusted, the method depends on the material.

• The plastic ones have decorative plugs, with the help of which you can neatly and beautifully join the end of the plinth and the door casing.

• A cut is made on the wooden one at 45 degrees to align the adjacent side of the plinth with the thickness of the door casing.

Dismantling

Removal of platbands is usually required when cash is replaced. There is no need to worry about their safety, but the work is done carefully. Taking an ax with a sharp blade and a hammer in their hands, they begin to dismantle:

The procedure must be carried out carefully so that no dents are left on the door frame. Instead of an ax, homemade sharpened strips of durable metal or other similar devices.

Anyone who has done renovations at least once in their life has come across such items as door frames. This is the name for a structure that helps cover all imperfections after its installation, making the passage into the room more aesthetically attractive and complete. They cover the space between the wall and the door frame and perform decorative, protective and camouflage functions.

They differ from each other in thickness, width, material, design.

Platbands for interior doors are overhead profiled strips made of various materials.

To increase the width doorways Extensions were invented to fit the size of the wall. They always come complete and can be ready-made or cut. This feature determines the method of their installation, as well as the time required for their installation.

When planning work, a novice in the renovation business is faced with the question of how to install the trim on the door. It is possible to do this yourself if you have carpentry skills and the necessary equipment.

Copper-colored nails are used to fasten structural elements. Over time, the fasteners will darken and become invisible against the background of the canvas. If the door has bright hues, it is recommended to cut off the nail heads with pliers, and you can also use galvanized nails for fastening.

Application liquid nails It is not recommended for fastening due to the impossibility of dismantling the structure.

In addition to the decorative function of this design, it is able to hide such shortcomings as carelessly applied polyurethane foam, nails, cracks and other flaws. Decorative trims cables carrying the Internet or television are well hidden on the door, creating aesthetic appearance doorway, protecting the wire from damage.

There are street and interior views designs. Outdoor ones should have high wear resistance and strength, and interior ones should have an aesthetic appearance.

The angle of the cut can be anything depending on the interior design features. Do the best job electric jigsaw.

Most often, cash for interior doors at the joints is cut at an angle of 45°, except for the telescopic type of products. Joints at this angle look more invisible and neat.

Form

Door frames may have different shapes, the choice of which depends on the material of the door leaf, its style and quality. The following forms of platbands are distinguished:

1. Smooth is the simplest and most popular option for door design. Pairs well with different styles in the interior, affordable, easy to fix in doorway.
2. Semicircular - a frame for a door that has volumetric roundings along the perimeter of the structure. The radius of roundness can be either large or small.
3. Embossed is an expensive option for decorating a doorway. This variety is made from high-quality wood using milling machine. There are a large number of design options for this type of model.
4. Carved - a good option doorway design in old style. Expensive raw materials are used for their production.

The smooth casing is divided into types: with a capital, Greek, profiled. The capital is fashionable solution doorway design, is a decorative strip located under the ceiling.

Material of manufacture

The material from which door frames are made is directly related to the quality of the products. Therefore, when choosing products, it is necessary to pay special attention to this issue.

The classification of platbands according to the type of materials from which they are made is as follows:

• from MDF;
• metal;
• wooden;
• ceramic;
• telescopic models;

Ceramic structures are stylish design doors, is used when the walls of the room are also laid with the same tiles. This option is less practical, reliable and durable than the others.

Platband door MDF- a profitable and practical option. The cost of the product is low, and the quality is not inferior to wooden ones. The only negative is the high ability of this material to absorb moisture, so it is not recommended to install them in the bathroom, as this can lead to deformation of the structure.

Wooden

Wooden door frames are characterized by high quality and aesthetically attractive appearance. The material used is pine, an environmentally friendly raw material. To save long term service, the structure is varnished.

Plastic

Modern materials such as plastic are the most practical design option plastic doors, since the material does not rot, does not absorb moisture, it is easy to care for.

It has less aesthetic qualities than other door design methods. Suitable for technical rooms, balconies, loggias. Copes well with the function of preserving heat in the room, which allows this design to be used as external design door or window openings.

Metal

This type products are most often used as platbands for metal doors. Iron products are made from steel or aluminum. Due to this, the structure is strong, durable and fire-resistant.

This type has a laconic, even shape. To install such a structure, in addition to the standard set of tools, you will also need a grinder.

Mounting methods

You need to figure out how to properly install platbands for interior doors.

Installation of the structure begins with determining the installation method, selection of materials and necessary equipment.

Most often, the installation of the structure is carried out using a miter box. This tool allows you to cut the end evenly at the desired angle.

First you need to decide on the choice of cutting angle. There are two ways to join fastening elements: at an angle of 90° or at an angle of 45°.

The first method is simple and less labor-intensive. It is necessary to measure everything exactly and carefully secure it using metal or liquid nails. Telescopic models are recommended to be installed in this way. Installation of platbands on telescopic doors should be done at an angle of 90°.

The second method is more labor-intensive and requires care and the use of a miter box or jigsaw, or a square.

After the measurement and preparation process structural elements installation, you can begin fixing them to the frame. First, we attach several elements of corner structures to nails, and then last resort set the top bar. If everything went well, all that remains is to secure the door frames with large nails at intervals of 20 cm.

What is telescopic type

The appearance of this type is a curved bar around the entire perimeter. In this case, fastening elements are not needed; the structure is installed using liquid nails.

The telescopic view is represented by a corner, one shelf of which is placed in the groove of the door frame during installation of the products. This design comes complete with a door frame, thereby blocking free space.

A simple procedure for installing fastening elements allows you to install trim on the door yourself.

Design

It’s good when the interior design matches the design of the doors and a similar texture is used in the implementation of the project. The door leaf continues the style of the room, its walls, ceiling, floor. Finishing with platbands will complete the composition of the room, making it decorated and functional.

Beautiful platbands for doors help to visually dilute the room, make it brighter and more interesting. It is necessary that the color of the structural elements goes well with the door, wallpaper, and floor covering. The materials of the products should harmoniously complement each other.

Door installation

How to nail platbands and learn how to do it quickly and efficiently is of interest to every novice craftsman. There are a number of rules and nuances that you need to familiarize yourself with before starting work.

Installation of interior door frames always begins from the side into which the door opens. This is due to the fact that the hinges create obstacles to the alignment of the door frame with the trim. The use of mortise or hidden hinges in this case makes the task easier.

In order to create free movement of the hinge mechanism, a small indentation is made on their side and on the opposite side.

Installation of such elements may result in an unwanted gap or gap. To eliminate these errors, you can use acrylic and wax sealants. They are also used to process structural joints.

Equipment

How to attach platbands to interior doors - frequently asked question when carrying out repairs.

The choice of fastening depends on the material from which the structure is made. These can be nails and different types of glue.

The product package looks like this:

• for single leaf swing door you will need 5 sticks - this is 2.5 sticks mounted on one side, 2.5 sticks on the other;
• for a door with two leaves you will need 6 trims - 3 sticks on each side.

Platband is a product that is installed by a master in an already formed doorway; it can be installed on one side or on both sides, which means that the equipment will be different.

Required tools for installation

How to install trim on an interior door using improvised means on our own, is of interest to everyone who has undertaken repairs on their own. First you need to prepare the equipment for work. Installation of door frames is carried out using the following tools:

• yardstick;
• a simple pencil;
• large metal square;
• miter box, jigsaw or saw;
• hammer;
• fastenings

Nails or glue are suitable for fastening.

DIY platbands

Making platbands for interior doors with your own hands is not an easy task, but it is doable. When working with wood, you will need the following tools:

• A sawmill is needed for cutting wooden panels;
• a wood processing machine is necessary for the manufacture of platbands;
• jointer designed for surface processing wooden canvas;
• a surface thicknesser is necessary to create identical blanks of structural elements;
• a jigsaw will provide quick cutting of the necessary parts;
• Sander;
• grinder - for metal structures.

Cashing a door with your own hands goes like this:

1. Choice of material. A dry board without deformation is suitable for blanks for platbands. On side structures, it is necessary to compare the direction of the wood fibers so that there are no differences between them.
2. Manufacturing blanks of platbands larger than necessary. It is important to ensure that the tool is well sharpened so that the platbands are without the slightest gaps, otherwise this will create difficulties during installation.
3. Sanding and smoothing the fibers of the product using fine-grained sandpaper.

Immediately before installation of the structure in door frame You can cut the platbands at an angle of 45° or 90°, and not in a workshop. This is due to the fact that it is necessary to perform control measurements before installation.

Hi all! The aesthetic appearance of an interior door largely depends on how accurately and accurately the trim is installed. And about how to install platbands after installation door block with the door, we'll talk further.

During the installation of platbands we will need:

• A tape measure, a simple pencil and a wax pencil to match the color of the casing;
• wood hacksaw and miter box or miter saw;
• masking tape, a utility knife blade, a hammer and finishing nails;
• acrylic sealant in the color of the casing and foam sponge;

Preparatory stage

Installing trim on the door is the final stage of door installation. To this moment:

• the door frame must be fully assembled and checked for verticality;
• the door is hung and adjusted (easy to open and close);
• the gap between the door frame and the wall is filled with polyurethane foam;
• a latch handle is installed on the door leaf and a strike plate on the jamb.

Note: the edge of the door frame and the surface of the wall should be located in the same plane and form a flat surface. If necessary, level the wall relative to the front side of the door block using plaster or putty.

Using a sharp blade, carefully cut off excess frozen foam around the perimeter of the door block, being careful not to damage it. decorative coating boxes.

There are various options for installing platbands on interior doors: using self-tapping screws, liquid nails, snap-on platbands. I will tell you how to attach the trim with finishing nails.

Step-by-step instructions for installing platbands

The platbands are installed in the following sequence: side – top – side. If you first install both side elements, it will be problematic to fit the top one exactly to size. Attach the side trim to the installation location. The frame should be located with a slight indentation from the edge of the box, in this case the platband does not interfere with the hinges, and the lock tongue does not cling to it when closing and opening the door.

Inspect the lower part of the casing - if there are chips or irregularities on it, cut off the edge. You can cut the platband with a hacksaw, using a miter box for precision. But without the skill of such work, it will be difficult to evenly cut platbands with a convex or shaped outer surface. It is most convenient to use a miter saw.

Install the casing vertically, check the size of the indentation from the edge of the box along the entire length. Make marks on the box with a pencil (so that later you can mount the casing exactly in the same place), mark on the casing the place where the cut will be made at 45°.

Using a miter saw, cut the upper part of the casing at a given angle, leaving about 2 cm from the mark (margin in case of an uneven cut). If the cut is smooth, attach the trim to the door frame and measure how much to cut from the bottom end so that the framing element fits correctly.

Then we attach the platband using finishing nails - they are distinguished by small heads that are recessed into the surface.

The nails are driven in at a centimeter indentation from the edge of the casing. Start fastening from the top, pressing the trim tightly in a vertical position. Drive the first nail at a distance of about 2 cm from the upper oblique cut. Try to make the attachment points along the same line, with the same pitch (30 - 40 cm). The finishing nails should be driven in extremely carefully so as not to hit the platband itself with a hammer. You can pre-drill the holes with a thin wood drill bit. Having secured the casing with nails, run your hand over it - the caps should not protrude above the surface and cling.

We put it back, tightly aligning the oblique cuts, and mark the place where the oblique cut will be made at the second end of the upper casing.

Having cut the second end at an angle of 45°, we use the same finishing nails to fix the horizontal part of the door frame.

Second vertical element it is mounted according to the same principle - cut down with a margin, check the accuracy of the cut, trim the bottom end to size, fix it with finishing nails.

note: the trim strips may be slightly deformed from long-term storage, they may be driven by a “propeller”. For structural rigidity, drive a nail from the top at the very edge on each side of the upper casing so that the connecting element passes vertically through the junction of the oblique cuts.

Small gaps remain at the joints; they are filled with sealant to match the color of the casing. To avoid leaving any traces when removing excess sealant with a sponge, stick strips of masking tape on both sides of the gap, close to it. Apply sealant from the tube and immediately remove excess with a wet and wrung out sponge. Then you can remove the masking tape. The same operation is performed with the second joint; using the same principle, you can mask the longitudinal joints of the door frame and frame, as well as any other joints of the door frame elements. The caps of the finishing nails can be easily masked with a wax pencil to match the color of the trim.

At this point, the installation of the platbands is completed. The final result depends on how carefully and accurately the work was performed at each stage.

Video on the topic “installation of interior door frames”:

• Main types of platbands
• Preparing the work area
• Using nails
• Liquid Nails
• Telescopic models

How to properly attach platbands to doors - this question often becomes relevant when renovating a house. Doing this yourself is actually quite simple if you know some of the nuances regarding the types of products and methods of fixing them around the perimeter of the opening.

There are several ways to attach door frames

MAIN TYPES OF FITTINGS

Before we look at how to attach platbands to interior doors, you should familiarize yourself with their main types. The installation method directly depends on the specific type of product.

Based on the material of manufacture, they are distinguished:

• wooden;
• from pressed paper;
• metal.

Types of door frames depending on the material of manufacture

For budget options pressed products are used. IN modern interior the most popular type are products made from MDF; moreover, unlike other types of platbands, any mounting option is available for MDF.

By appearance and configuration they are distinguished:

• straight;
• rounded;
• carved and figured;
• typesetting.

Variations of platbands according to configuration

Additionally, a capital can be installed above the upper casing. This element plays an excellent decorative role, especially when it comes to the classic style and variations close to it.

As for fastening methods, platbands can be installed in three main ways:

• on ordinary nails;
• for glue “liquid nails”;
• according to the “tongue and groove” principle.

In order for the opening to look organic, it is important to observe optimal sizes for all details. Cutting elements can be done in two ways: at right angles or 45 degrees. In the first case, the top strip is most often installed above the sidewalls, and its edge must be processed. For an oblique cut, you need to remove perfect angle so that the fragments fit together without gaps. It is better to use a miter box for cutting.

PREPARATION OF THE WORK AREA

Before proceeding directly to attaching the platbands, you should properly prepare work surface. The entire list of work can be divided into several stages:

1. Installation of the box. Platbands serve as a kind of decor for doors, as they can create an impressive frame and hide minor wall defects. Consequently, their installation must be done at the very end after installing the doors.
2. Removing foam. After the box has dried, it is necessary to cut off the excess polyurethane foam in order to create an even level between the wall and the tray; this is best done with a utility knife.
3. Removing irregularities. If, when installing the door leaf and frame, small defects appear on the wall, for example, chipped concrete, they can be repaired with plaster; this will not only facilitate installation, but also improve the strength of the opening. To ensure that no gaps remain during the installation process, the surface for attaching the platbands must be flat.
4. Wall decoration. Before installing the trim, you must complete everything Finishing work: painting, wallpapering, etc.
5. Cleaning. Remove all dust and other debris from the surface; when using glue, you must additionally degrease the perimeter of the opening.

Preparing the work area for installing the door casing

USING NAILS

The most traditional way to install platbands is to use nails. In order to hide the attachment points as much as possible, special miniature nails are used; their peculiarity is the almost complete absence of a head.

In order to properly nail the trims onto the door, you need to align them level. Since when installing on a wall, distortions or gaps may occur that were not present on the flat surface, it is recommended to leave a small excess of material when cutting.

Since nails without heads are used for interior door frames, try not to damage the coating of the cladding itself. It is most convenient to work with a small hammer. You can mark the joint location in advance using an awl.

In order to cover the nails on the platbands, they usually use a special mastic or grout to match the coating. Minor damage can be masked with paint, a felt-tip pen or pencil.

Using nails - traditional way fixing platbands

LIQUID NAILS

Another method of attaching platbands involves the use of special glue. The most popular option is the so-called liquid nails. This composition provides quick adhesion to almost any surface.

Let's look at how to properly fasten platbands without ordinary nails.

To do this, it is necessary to initially determine the exact position of each element. After this, apply a small amount of glue to the back of the plank and press it against the wall. If glue oozes out from under the casing, wipe it off immediately. It is advisable to apply only a few dots to prevent spreading.

You can secure the platbands either completely without nails, using glue, or by combining these two methods, this will ensure greater structural strength.

Fastening platbands with liquid nails simplifies the process

TELESCOPIC MODELS

The simplest is to attach telescopic trims to interior doors. It is made without nails, but can be supplemented with glue for greater strength. Installation features are directly related to their design.

Installing trim on doors: two installation methods

The fact is that the edges of the platbands, when connected, coincide with the edge of the extension or loot. The principle of coupling is “tongue and groove”.

Telescopic trims are attached strictly to the groove of the box strip

In other words, one part goes inside the other. Thus, in order to install such products, you just need to saw off the excess and join the parts. The protrusion of the element fits into a recess in the door frame. Then you need to set the required distance, which is adjusted by the size of the recess.

Regardless of which installation method you choose for a particular situation, you should be careful, since one awkward movement can ruin the entire structure. If there are unevenness on the wall, it is necessary to first level them so that there are no gaps, this applies to absolutely all models of platbands, regardless of the material of manufacture and configuration.

Video: https://youtu.be/Hq2mNmacACs

Search on the site:

Installing platbands on the door frame is the final stage of constructing the entire door structure. Cashings, first of all, serve as a decorative element that covers the interface of the entrance wall opening with door frame. Ennoble and give dignity appearance The correct selection of the color and texture of the element will help, which should be identical or as close as possible to the shade and material of the door being installed.

The final decoration of the doorway should be done at the final stage of renovation of the entire room - after whitewashing, painting and wallpapering the walls. This, at first glance, simple work requires some attention and accuracy. The problem here is the precise fit and correct installation of the trim on the door - without any gaps or distortions.

Types and classification of platbands

Large assortment of cash on the market building materials facilitates the choice, and its diversity allows for some classification of platbands. They are divided:

• by material - wooden, plastic, metal, composite;
• in shape - flat, rounded, curly;
• according to the installation method - overhead and telescopic.

Door trim can also include a decorative element such as a capital. It is made mainly from solid wood and decorated with a sophisticated engraving pattern, which gives the entire room sophistication and aristocracy.

When installing trims on interior doors, it is advisable to focus on the materials from which the door itself is made. If the door leaf is lined with veneer or made of MDF, then you will not have to select material for cashing. In this case, laminated MDF trim will be the most suitable.

It is impossible to give preference to any form - it is a matter of taste. However, it is worth remembering that classic flat strips for self-assembly will be more convenient to use and will help to avoid defects.

Installing overhead trim on the door involves directly attaching them to the door frame using glue or nails. Installation of telescopic platbands, due to their design features, can be produced without the use of any special elements. Such cashing does not cause distortions and does not require additional fastenings.

Telescopic trims

Their design difference is the presence of a special splined protrusion, made at a right angle and inserted into the longitudinal groove of the door frame. Such platbands make it visually monolithic, leaving the fasteners invisible. They are intended for arranging non-standard openings.

For walls that are too thick compared to the door frame, the installation of additional extensions may be required. By using them to correct the difference between the thickness of the enclosing structure and the width of the frame, you can achieve a perfectly neat appearance of the installed door.

Assembly and installation of platbands

To begin with, determine the internal dimensions of the vertical cashing in one of the following ways:

• using a tape measure, measure the distance from the floor to the junction of the upper transverse and side longitudinal beams of the door frame;
• make a risk on the platband attached in place.

The resulting mark will become the starting point for the future cut. Carefully, maintaining an angle of 45 degrees, the bar is cut so that its size is about outside turned out to be greater than with the internal one.

Using a miter box will greatly simplify your work.

When determining the cutting lines on the platbands, it should be taken into account that with different sides door leaf, their direction will be different. Don’t forget that each plank will require individual measurements. And one more thing - you should start installing cashing from the side of the hinges of the door that opens towards you.

The prepared side trims are not nailed tightly and only with two nails - one closer to the floor, the other in the middle. A blank for the top bar is inserted into the gap left on top and markings are drawn on it in place for future cutting. This will allow you to get rid of errors and formation as much as possible. large cracks upon subsequent pairing of all elements.

You can adjust the location of all the cash by lightly tapping the sides of the planks, previously attached to nails. If the gaps are large enough, then one nail is removed from the plank, after which it is given the desired position. The final installation of the prepared trim on the door is possible only after carefully adjusting them to size, maintaining the correct angles and minimum clearances connected parts.

Fastening

To fasten cash, it is best to use thin nails, the heads of which are removed after being punched into the door frame with pliers. A uniform step of about 15 centimeters will be quite sufficient for reliable fastening. If the adjacent walls of the doorway are smooth, then it will be enough to secure the platbands in the upper and lower parts with a pair of nails driven in the middle of the strip.

Copper or galvanized nails should be used, as over time they do not cause dark stains on the wood, even in rooms with excessive humidity.

To fasten MDF trim, a slightly different technology is required. To work with them, you should first drill blind holes with a thin drill so that when driving a nail, you can minimize the risk of damage to the strip. The same additional preparation must be made when using self-tapping screws as fasteners. But they will require slightly larger diameter holes in order to recess the caps, which are subsequently covered with plugs to match the casing, or sealed with acrylic putty before painting it.

Application adhesive compositions or liquid nails is used only for perfectly smooth walls adjacent to the door frame. Such fastening is not possible in rooms with high humidity, such as bathrooms and toilets.

Little tricks

When choosing wooden trims, you should pay attention to the quality of drying the boards.

How to install platbands on interior doors yourself

Poorly dried wood:

• has an uneven color;
• has blue spots on the surface;
• When tapped, it makes a dull sound.

In order not to spoil the workpiece, the length of the cashing should be measured with a margin of at least 1 cm, which will be useful when adjusting the corners of the parts to be joined. It is easier to cut off the excess from the opposite end of the plank.

You should not use a moisture-resistant marker for marking on the front side. It will be difficult to remove the drawn lines by normal erasing.

Trimming trims is best done with a miter saw. It will provide a clean cut without chipping. It is easier to carefully adjust the cut corners with a belt sander. With its help you can achieve perfect joining in the corners.

If gaps appear when installing trim on the door, they can be made almost invisible by using a mixture based on beeswax, which is purchased at a construction supermarket. Heated and brought to the state of a plastic mass, it will perfectly fill the resulting cracks.

Visually, a cash register that rises 10 centimeters above the doorway looks better, and the uniform style of the rooms in the apartment will be ensured by the same trim on all doors.

06/15/2015 at 10:06

From which it follows that liquid nail glue can be used when working on almost any surface, but more on that later. Liquid nail glue is nothing more than just a dense adhesive mass placed in plastic tubes for convenience. Now let’s talk about where ordinary construction adhesive got its name from.

Initially, when liquid nail glue was first produced, it was just an ordinary construction glue. universal glue For different surfaces! But since this construction adhesive was produced by a company with a name like Liquid Nails, those who know English understand, those who don’t, I’ll explain:

Liquid Nails is nothing more than liquid nails and our people, or maybe marketers, have attached liquid nails to the word glue.

Sticking platbands using adhesives

You just need to ensure complete adherence of the platbands to the wall and door frame.

Any adhesive materials can withstand a certain load and, with a large weight of the platbands, will not be able to properly hold the platbands on the plane. When choosing one or another adhesive composition, check the weight and properties of the platbands. You can glue the platbands onto liquid nails, or you can attach them to silicone or polyurethane foam.

Miter saw for trimming trims

In order for the platbands to hold firmly, they must be properly adjusted and secured.

Door installation in Vladimir and the region

The plinth is more convenient and better to cut to an already installed platband, since there is less chance of miscalculation and making a mistake. If the wallpaper is glued before installation (or the walls are painted), then the casing will hide the edge of the wallpaper sheet behind it. If the wallpaper is pasted after installing the trim, then the wallpaper adjacent to it can be quite noticeable and not aesthetically pleasing. If doorway much more sizes door block, then when gluing wallpaper you need to leave an allowance on the sides and top, otherwise the casing may not reach the edge of the wallpaper as in this photo above.

There are two traditional options for sawing the platband - at an angle of 90° and at an angle of 45°.

The 90° angle is used on straight, even platbands without curves at the request of the customer.

Useful articles and reviews on repair topics

This way it will be easier not to get confused and this is a guarantee that everything will turn out beautifully.

– As you know, the casing must “stand” on the floor, and in order to avoid a gap between the casing and the floor, the lower edge of the casing must be sawed off (trimmed) at an angle of 90°, since the factory cut may not always be correct. Of course, everything depends on the specific manufacturer, the quality of the product, its quality level, but this preparation procedure should not be ignored.

– Attach 2 trims to each other reverse side to understand whether they are the same width, it happens that the planks differ in width by 0.5-1 mm.

How to insulate a window slope?

Finishing nails are convenient because if the need arises, you can always dismantle the casing and then reinstall it. For work, take nails with a flattened head, 40 mm long and 1.4 mm in diameter. To make the work go faster, make holes in the platbands in advance at a distance of 5-7.5 centimeters. After you drive the nails in with a side cutter, remove the heads and mask these places with a special wax pencil that matches the color.

The second method is to fasten the platbands using liquid nails.

Installation of interior doors

This will avoid splitting and, accordingly, the formation of cracks on the visible part of the box.

Installation of interior doors. Stage 6. Installation of the box. Assembled box insert into the opening and secure with wedges from above so that approximately the same distance remains on the right and left. Align the box with the wall on the hinge side. Check the vertical with a level. Secure the box to the wall with self-tapping screws at the top and bottom.

Installation and installation of skirting boards and platbands

In the store we find the required baseboard and measure its length. We take the number we have and divide it by the length of the plinth, and the amount of plinth we need is ready.

Skirting boards can be made of wood or plastic, with or without cable duct. The wooden plinth mainly goes to the laminate or parquet board, so you shouldn’t press the baseboard tightly against it. There are two mounting methods wooden skirting boards- using self-tapping screws and liquid nails.

Installation of platbands is the final stage in the installation of interior doors.

Installation of door trim with liquid nails

1. Filing of standing frames. Using a tape measure, measure the distance H from the floor to the bottom edge of the groove in the top block of the box (Fig. 34); subtract the height of the plinth block from this size, you will get the size into which you need to cut the standing frame. Saw the pillar trims at an angle of 90°.

2. Connection of platbands with decorative elements. Place the perforated plate into the groove on the back of the trim and decorative element.

Correct installation of interior doors

The box parts are connected using self-tapping screws.

The box is installed as follows:

The doors are installed on hinges pre-attached to the door and frame. You need to first hang the canvas, checking how smoothly the door closes; to adjust, put the spacers a little lower door handle and above the top loop. After this, you need to check the door again - for example, it should not move on its own in a half-closed position.

When the leaf is installed perfectly straight, the joint between the door frame and the opening can be filled with polyurethane foam, after first removing dust and wetting the surfaces.

Installation ()

Creating a perfect cut requires the use of a miter box. It is recommended to glue the joints formed during the installation process. The plinth will be removable if you put plugs on the heads of the screws.

For greater clarity, look below, it will illustrate all the above information and give you confidence in your abilities!

If you do not have the opportunity or desire to do the installation yourself, you can contact us; our specialists will quickly and efficiently complete this work!

The cost of installing a plinth is from 190 rubles.

Installation of door trim with liquid nails

Let's take a closer look at them.

1. You decide to install doors in your room, apartment, country house? A commendable decision, the success of which directly depends on your plumbing and carpentry skills. If you think that installing an interior door is easy, feel free to go into battle! It is possible to save a decent amount by losing some time.

How to install platbands on interior doors

The main thing is that the result of the work does not look like this.

Door installation

Thresholds at the box modern doors, as a rule, are absent, but at the client’s request it is included in the kit.

Note: A threshold is most often used in entrance doors to retain heat in the house, but it is not advisable to use it in interior doors, since it will interfere with air exchange between rooms.

If you order a door made of aged wood with a specific design, then along with it you should order hinges, escutcheons, a lock mechanism (lock or latch with a lock) and handles that best match the style of the door.

What you should know before installing a door

The door can be installed only after laying the final floor covering and after finishing the walls in the rooms between which it will be installed, i.e.

Installation of door trim with liquid nails

In this case, you do not have to deal with complex fastening devices, drilling a wall, floor or ceiling. Not only a specialist, but also any other person can work with glue.

As a rule, the packaging indicates what can be glued with this substance, how to apply it, and how long it takes to dry. In construction, adhesives are used for parquet, linoleum, carpet, ceramic tiles, laminate, porcelain tiles, ceiling panels, marble facing slabs, wooden planks, etc.

http://remontavtosvoimirukami.ru

Installing platbands on the doors allows you to give the entrance space an aesthetic appearance - this finishing touch installation The process itself is very labor-intensive and must be carried out scrupulously, but this work can be done with one’s own hands by almost every person who has minimal skills in working with woodworking tools. How to install trim on doors without much difficulty with your own hands? Just. It is important to stick to the basic rules.

The choice of platband material and features of its installation

The platband itself for interior doors is a decorative part of the completion of the opening, covering installation seam and protecting insulating materials from contact with ultraviolet radiation. It is made from various materials, which are selected in accordance with the overall design of the door and room.

The installation of this unit is very similar to the installation of skirting boards and cornices - it sums up the work done.

Correct installation has a very great importance and varies somewhat depending on the material used.
Modern industry produces the following types of platbands for interior doors:

• Wooden frames are made either from a single piece of wood or from gluing it together. Such platbands can be nailed to the door frame, either with ordinary nails without heads, or glued to “liquid nails”. This type of glue is best used when there is an ideal wall.
• It is better to attach plastic trims with glue. The cost of such platbands is very small, which allows them to be dismantled, if necessary, without regret. Plastic platband very flexible and easy to attach, it is one of the pliable materials for DIY work.
• MDF trim strips for interior doors are very similar to their wooden brothers. But they must be secured by adhering to certain strict rules. To prevent the casing from splitting, a hole in it for the nail is made with a 1-1.5 mm drill.

The corner of the trim strip

When choosing the corner of the platband, you need to look at the presence of relief on its surface. If it has a capital pattern or it is perfectly smooth, then such a casing should be correctly joined at a right angle (either vertically or horizontally).
Embossed plinth, like plinth with an oval shape outer surface It is best to cut at 45 degrees.

This option for joining platbands is used most often, but it requires strict adherence to certain rules and great care.

If you make a mistake in cutting the trim at an angle of 45 degrees, then when installation is done, you will end up with small gaps that will have to be filled with wood putty. To cut parts correctly, you need to use a miter box and a file with fairly fine teeth.

Step-by-step installation

For correct installation platbands with your own hands, you first need to determine their length. When calculating the cutting angle, you must adhere to next rule: outer size platband should be taken at the rate of +34 mm to the width of the platband. When installed on a box, the size should be +22 mm, and the internal size should be +18 mm from the width of the casing. Thus, with a casing width of 800 mm, it outer size when installed on an extension it will be equal to 834 mm, when installed on a door frame - 822 mm, and the value internal size platband will be equal to 818 mm.

When installing the casing, you must leave a margin of height equal to the width of the casing; this will allow, in case of inaccuracy, to eliminate an error in the cut of the casing!

The same manipulations must be carried out with the second casing. Just don't do it exact copy first casing. The height of the two trims may differ from each other.


Next, you need to cut down the measured sides of the casing using a miter box and a small hacksaw. You need to cut at an angle of 45 degrees, drawing a cutting line first.
Having cut two vertical parts of the casing, you need to “grab” them to the door frame with two nails to determine the length of the horizontal part of the casing.
By the way, it would be better if the installation of the platbands starts from the door opening side.
Next, we measure the horizontal part of the platband, sliding its upper part under its vertical “neighbors.” We draw the cutting lines and make the cut itself in the same way as in previous cases. After making sure that everything “lays down” correctly, you can nail the platbands to the base.
When the installation of the platbands is completed, you need to cover the joints. The easiest way to do this is with a special putty that matches the color of the wood of the door and trim.

Installation of telescopic platbands

Installation of telescopic platbands is generally done in the same way as installation of conventional ones - you can do this work yourself. The only nuance that must be taken into account is the fragility of the platbands themselves - they must be inserted and removed from the grooves strictly at right angles. Otherwise, the shelf, which holds the casing in the groove, will inevitably break off.

The name itself implies that the platbands must somehow adjust to the thickness of the wall, but this adjustment is very symbolic. The main task is performed by extensions connecting the box and the platbands themselves.

Do-it-yourself installation begins with installing the box. When it is ready, the extensions are attached to it.
The last step will be attaching the trim. The only difficulty that may arise with them is marking and cutting. If you do them incorrectly, there will be gaps at the joints. They can be sealed with putty, but it is better if they are not there.
At this point the installation can be considered complete. More details on the video:

Nuances you need to know when doing the work yourself

In order to hide the place of nailing, a special wax corrector is used in the color of the wood of the casing.
If the wall near the doorway is perfectly flat, then it is better to attach the platband with “liquid nails”, in this case there will be no holes from nails.
To avoid the appearance of cracks after cutting down the platbands, measurements must be taken correctly, without making mistakes, while making preliminary notes in pencil. This measurement option will allow you to minimize gaps, and, ideally, avoid them.
Sometimes a situation may arise when the platbands diverge slightly at the place where they join. This can be corrected by fastening the trim strips with a small nail on top of the horizontal casing.

The main function of door frame trim is to hide unsightly spots that form during door installation. The second advantage is the appearance - with platbands the door looks beautiful, emphasizing the subtleties of the interior of the room, making the door durable, powerful and inaccessible. Fastening platbands can be done in several ways. To do this, you must follow the instructions for installing the door and do not rush, but check each fixed element for evenness and strength.

Existing types of door frames

Before installing door elements, you can familiarize yourself with the types of trims produced.

But, if the house has ordinary hinged interior doors, then the capital, of course, will be “out of place” and will ruin the appearance. To emphasize the beauty of the door, you should choose the appropriate trim.

The principle of attaching the casing to the jamb

Required set of tools, materials

Before you begin installing the trim on the door frame, you should assemble a set necessary tools, without which the work will not be done. You will also need some materials:

This is all that will be needed to complete the planned work with your own hands.

Existing door trim design options

There are 4 common methods for attaching door frames. Each method has its own approach to fasteners and installation.

Methods of attaching platbands to interior doors

Using finishing nails

Working with finishing nails is simple, does not require any costs and physical strength, and also a lot of time.

Scheme of the structure of the door casing and frame

To attach cash to interior doors, you will need finishing nails. This is a small nail, which is only 4 mm long and 1.5 mm in diameter. The cap has a smooth surface (flattened). Using these nails, the platband can be removed and reinstalled.

Step-by-step process for installing the trim on the door

It will not work to hammer nails directly into the platband - it is difficult and ugly. Therefore, you need to use an electric drill. A hole is made for a nail every 7 cm, then nails are driven into these holes, but not completely. Nail heads should be cut off with a side cutter. After this, slightly knock down the protruding needle so that it does not protrude on the surface.


Thus, you can achieve a good result in all respects: the appearance is not spoiled, the platband is installed. To ensure that nothing is visible at all, you can use a special pencil that will paint over the fasteners. The video shows in detail how to attach platbands to interior doors.

Application of liquid nails

This method is used only when the platbands are made from MDF. High-quality work done will delight you with the appearance of the door without nails, which will be the result of installing the platbands. So, liquid nails must be used on a perfectly smooth surface, free of dust and pebbles. The fastening process consists of several steps.

Pressing the platband with clamps to the door frame

On inner surface platband is applied using a construction gun “liquid nails”. Without waiting time, the platband should be secured in its place, on the base. The element is pressed against the wall, a little time is waited (literally 1 minute), and then it is removed. You need to wait 2 minutes, apply a little more nails to the back side of the platband and attach it to this place. It should be held for 2 minutes for the reaction to begin.

The process of applying liquid to the platband

In order to reinsure yourself, you can use Double-sided tape. After the first application, you have 2 minutes to secure the tape to the edge of the back side of the casing.

This method has its advantages: the appearance of the door leaf remains unchanged and original. If a decision is made to dismantle the platbands, then it will be difficult to do without a tool. “Liquid nails” differ from other adhesives in their technical characteristics, the main advantage is good adhesion.

Use of self-tapping screws

Installation of the platband using wood screws is the key to strength and durability. This is done in the standard way.
The self-tapping screw for a wooden surface should be 2 cm long; the tools used are a screwdriver or a screwdriver, as well as an electric drill with a wood drill.
In order to recess the screw head into wooden frame, you need a drill and a drill bit large diameter make a notch for the top of the screw. The fastener is screwed into the platband until it stops. After this, the fastening site is masked with a special pencil.

The principle of fastening the platband with self-tapping screws

Another option is to purchase special nylon linings of the same color as the door leaf with the frame.

Using clasps with a latch

The interesting name “platband with beak” has become widespread and used in installation. This door element resembles the letter “G”. Installation of this platband is quite simple and does not take much time. The largest segment of the element is placed in a certain recess and snapped into place.

Device diagram and installation of platband with latch

This method has some disadvantages. The main one is stratification. If the trim is constantly removed and put on, the latch will damage the canvas.

Basically, platbands of this shape are made from MDF, which is a material that is soft in structure. As a result, glue must be used, and the appearance will no longer be attractive.