MegaFon autoinformers make communication more convenient. If an attempt to dial a particular subscriber fails, the voice on the receiver tells us the reason. For example, the subscriber's phone may be turned off or located outside the coverage area of the network. In this review, we will look at the “Number unavailable” response from MegaFon and its autoinformer - we will tell you what this message means and what to do next.
Subscriber is out of network coverage area
No operator can boast of 100% coverage. There are areas where there is simply no connection. The reasons can be very different - for example, the lack of expediency of organizing a broadcasting zone at one point or another. And when we get into such a zone, the phone cannot register on the network. When any subscriber tries to reach us, he will hear MegaFon's voice notification that the number is unavailable.
Let's see in which cases our potential interlocutors will hear a message that our number is not available:
- When you are in the subway - indeed, coverage from MegaFon is not present at all stations and stages. Therefore, dialing often ends in failure;
- When we are in the country or on a country vacation - outside the city there may be no connection from Megaphone, because of which the callers hear a notification that the called number is unavailable;
- When you are at a point with poor reception - such points can be located in a variety of places. For example, in a certain corner of the apartment, around the corner of the house or at the entrance. Literally 3-4 meters to the side - and the connection reappears.
Sometimes a notification that the MegaFon number is unavailable appears at the time the operator is carrying out any repair or preventive work- at this time, communication services are provided with failures.
Other reasons
The phrase of the MegaFon autoinformer “Number is not available” can sound for many other reasons. For example, when the called subscriber is completely accumulator battery in his mobile phone. That is, the network cannot even determine if the handset is turned off manually, since it does not give the desired response. The same thing happens when any other subscriber device is discharged, such as a tablet or smart video camera.
If the called number on MegaFon is not available, then this may mean that the subscriber is going somewhere. Communication is lost on many suburban areas, causing an unavailable message to appear. In addition, most airlines ask to turn off Cell Phones and others electronic devices while on board the aircraft - therefore, during long flights, the number of one or another subscriber may become unavailable.
The subscriber's SIM card has failed - this is another reason why the number on MegaFon may become unavailable. When the SIM card breaks down, the phone loses connection with the base stations. At the same time, the subscriber himself is not notified about this in any way - until he looks at the phone screen, he will not know about it in any way.
What to do
If you are trying to reach a particular contact, but you hear a notification that the number is not available, just try calling him later- that's the solution to the problem. And in order to save yourself from repeated attempts to dial, send him an SMS with a request to call back. Once the SMS has been delivered (some phones will announce this with a sound), you will see this and be able to call again. In other cases, you will have to wait until the called subscriber's phone registers in the MegaFon network.
For many people, staying connected is very important. Often they ask the same from their close people and just acquaintances. Therefore, when they are faced with the fact that someone's phone does not answer, it confuses them, especially if an answering machine sounds instead of the usual beeps. Such people often come up with the most terrible things. But most likely, everything is in order with the relative. You just need to correctly interpret the phrases of the answering machine.
One of these autoinformer messages is: " This type connection is not available to the subscriber". This phrase can be heard for a variety of reasons. And the first thing to check is the amount of money on the account of the caller himself. It is possible that there simply are not enough funds to make such a call. You also need to cancel the barring of outgoing calls using combinations #33*0000# or ##002#.
If, after that, in response, you hear that this type of communication is not available to the subscriber, then this is due to the called number. There may be several reasons. The most common of them is the negative balance of the subscriber while in roaming. In this case, until the money is credited to the account, it will not work to get through to him. True, he can still receive SMS.
Another reason may be an inadvertently or intentionally set barring of incoming calls. In this case, you just need to cancel it, and the subscriber will be able to receive calls. To do this, dial the combinations #35*0000# and ##002#. If in this case the system answers that this type of communication is not available for the subscriber, it is possible that his number is blocked. To resume service, you can apply with a passport to the nearest office or to the contact center of a mobile operator. The specialist will be able to quickly resolve this problem.
But it also happens that this type of communication is not available to the subscriber, and it is for the one who calls. It is possible that his number was simply added to the Black List. In this case, you can do only one thing - call from another phone. If you managed to get through, then most likely it is. Unfortunately, until the subscriber himself removes the number from this list, nothing can be done.
If all the reasons are eliminated, but the situation has not changed, and this type of communication is not available to the subscriber anyway, you need to restart the telephone and move the SIM card to another mobile. If this does not help, then you need to contact your mobile operator for help. There may be a network failure and you need to fix the problem. You just need to be prepared for the fact that it will take some time to solve the problem. Although, of course, any cellular company does its best to resolve issues as soon as possible.
In any case, do not be afraid that the subscriber is unavailable. You can always find out what this autoinformer message means on the company's website or by contacting its consultants at the contact center or the nearest office. And after that, take all the actions recommended by them. Surely it will turn out that everything is solvable, and in the near future it will be possible to easily contact the called subscriber.
"The number is not available, leave a message on the answering machine" - what does this mean?
- his phone is turned off;
- he is not in the access zone;
- a person brought my number into an emergency;
- Or does it just turn off?
Chupakhina Tatyana Borisovna
I can’t say for all subscribers, but when the robot gives such a message to my contacts, I know that people are simply not in the access area and when the subscriber appears on the network I receive an SMS about this.
I don't use the auto-attendant because I know people don't use it.
Help to
Let's think logically:
- The operator directs you to the subscriber's answering machine.
- It turns out that his number will someday turn on, because he must somehow listen to voice mail.
- If the subscriber was outside the coverage area of the operator's network cellular communication, you would not hear the voice notification.
- When the person disconnects, you hear short beeps, just like when the person is already talking to someone (that is, when the line is busy).
It turns out that the following is most likely: the subscriber's phone has sat down and he turned it off on purpose. And the sim card is fine.
What does SUBSCRIBER NOT AVAILABLE - LEAVE A MESSAGE AFTER THE BEEP mean?
Russians, help - how to understand this phrase: the phone is turned off, discharged, disconnected for non-payment or out of network coverage?
Please explain!
Levyj levyj
If there is an answering machine, then it can turn on either after a certain time of normal beeps, or immediately when the subscriber is not online ... If the person did not set the answering machine, then it is simply temporarily unavailable and the operator is trying to impose a voice mail service ...)
And when it is blocked or disabled, they say so ...
Julia nord
We usually "unavailable", which means the signal does not pass: in some places in the subway, in remote areas of the city or in buildings with jammers. You can disconnect, you can say a message, then he will listen to it on voice mail. I usually have this: Well, where are you?
What is the difference between the phrases: "Subscriber is temporarily unavailable" and "Subscriber's machine is turned off"?
In what situations does the first phrase sound, and in which the second?
Miss crazy sexy marvelous
If you ran out of money some time ago, then the subscriber is temporarily unavailable..
If you turned off the phone, or went to Bobruisk, where the phone cannot catch the network, then the device is reported to be turned off or out of the network coverage area ..=)
here....
So let you have a positive balance and position in the access zone! =)
Dima vp
Temporarily unavailable when the signal from the phone cannot find the base and will be checked again, the subscriber's device is turned off, this means the same signal is not available, and when the money runs out on the account, the phrase "The subscriber's device is temporarily blocked" will sound
What is the difference between the phrases: "Subscriber is temporarily unavailable" and "Subscriber's machine is turned off"?
These phrases can be in one sentence through OR and denote what was said - the BS does not distinguish between these events. And this is the most correct reference. But not all OPSOS.
Evgeny Kharlan
If these 2 factors exist, then it is time to switch to another mobile operator, even if the money on the account is over, then the subscriber has the right to talk to another subscriber for his cash account. But if this is not possible, then it is time to leave this mobile operator, you need to show that cellular operators depend on us and not we on them, there are no services from current customers. The problem has already been solved, with a claim to the Tele 2 office, I decided to my mother, who is now visiting Kuzbass, after she arrives home to offer her to switch from Tele 2 on the Mobile Operator MTC. For Mobile operator Tele 2 complicates the life of its own customers, which is why I cannot call their own subscriber in their own network for my own cash account, but I have to transfer money from my account to the account of another subscriber, this is extremely simply not convenient!
In this article I will tell you what it means "This type of connection is not available to the subscriber", what are the causes of this phenomenon and how to fix it. For many of us, mobile communication has long been an integral attribute of our lives. Every day we call or receive calls, exchange SMS or MMS, just communicate or solve many business issues. At the same time, there are situations when, when calling a person close or familiar to us, we receive an automatic message stating that "This type of communication is not available to the subscriber." Assuming problems with the operation of our phone (or the quality of the connection), we begin to check the balance of our account, reboot our phone and take many more chaotic steps aimed at solving the problem. Next, I will explain how to fix this problem.
How to set up a commercial platform to use signals
After the subscription is issued, go to the platform configuration. To configure the use of signals on the platform, open the settings window and go to the tab. You need to configure the following settings. Accept the rules for using the "Signals" service - in order to start using the "Signals" service, you must accept the rules for using it. Activate the subscription to receive signals - copying trading operations from the provider's account to your account starts only after checking this parameter. If it is disabled, trading operations are not copied to the account. Only after activating this option will the following settings be available for editing. These orders are executed on the side of the broker, which, on the one hand, means its execution regardless of whether the platform is running or not, and on the other hand, its execution can be performed with different brokers. Thus, when copying stop orders, the position will be closed yes or yes when the profit and loss levels that have been specified are reached. Synchronize positions without confirmation - perform automatic synchronization without confirmation requests. During a subscription to a signal, the accounts of the subscriber and provider are synchronized periodically. This may be an initial synchronization when a subscription is activated, or a periodic synchronization when differences are found between the Subscriber's and the Provider's accounts. If during synchronization pending orders or positions that were not opened by a signal are found on the subscriber's account, the user will see a dialog that suggests closing positions and excluding orders. If there is a floating advantage in the provider's account when doing the initial sync, the user will be presented with a dialog prompting them to wait for better conditions to start copying. In both cases, until the user makes a decision by clicking the corresponding button in the dialog box, synchronization is not performed and signal copying is aborted. If the platform is not continuously monitored, manual confirmation requests to perform synchronization remain unanswered and thus signal copying may be stopped. If you activate this option, synchronization will always be performed automatically, unless the Subscriber has to confirm it. More detailed information about the calculation of transaction volumes can be found in the "Signals Buyers" section. It is not recommended to change the load on the tank if you already have open positions with a signal. This will lead to a correction of the volume of open positions. If the level of equity on the account falls below the specified level, then the copying of commercial signals stops automatically, and all positions are closed forcibly. A value of 0 means no restrictions. This is the value of the permitted deviation of the order execution price in relation to the price originally requested by the platform at the moment the request for the execution of a trade is created in accordance with the received signal. This value is specified as part current distribution instrument that is involved in a commercial transaction. If the deviation is less than or equal to the specified parameter, the order is executed. If the deviation value exceeds the specified parameter, the platform tries to perform the operation again, increasing the allowed deviation to 0.5 spreads. If the "receiving" is received again, the subscriber and provider accounts will be desynchronized.
- Please read these rules carefully.
- If accepted, check the box before this point.
- If you do not accept them, do not use the "Signals" service.
- This affects the calculation of the volume of transactions performed in accordance with the signals.
- The volume is calculated proportionally.
What does “This type of communication is not available to the subscriber” mean and what are the reasons for this message
Before considering the meaning of the message that the type of communication used is not available, first of all, the reader's attention should be focused on the fact that communication problems are observed not with the caller, but with the one who is being called. The latter is usually blocked from making voice calls and receiving incoming calls from the operator, and the reasons for this may be as follows:
How does the initial synchronization of user and provider accounts work?
Synchronization is necessary to copy the provider's commercial transactions to the subscriber's account. The initial synchronization will be taken into account if there are still no open signal positions in the subscriber's account, for example when the subscription is activated.
During synchronization, a series of checks are performed. The Subscriber cannot have open market orders and pending orders; The floating cumulative benefit for all supplier orders must be negative. This allows the subscriber to enter the market at a price that is no worse than that for which the provider entered. Although at least one of these conditions is not met, a corresponding warning will be displayed when the synchronization is attempted.
I think you understand what it is "This type of communication is not available to the subscriber" and when this message appears.
How to get through if this type of communication is not available to the subscriber?
So, if you received an automatic message that "this type of communication is not available to the subscriber", then most likely you are calling one of the numbers MTS subscriber(Mobile Tele Systems) who has (or has blocked) incoming calls for any reason. For other operators, usually, the message I am considering has a modified lexical form like “This number (or subscriber) is not served” (Megafon); “The number you have dialed is temporarily blocked” (Beeline) and so on.
Features of synchronization when copying
Carefully read the recommendations described in the dialogues. If you do not want the program to close positions and delete pending orders, click the Leave Positions button or close the dialog. If you would like to sync your vendor account despite a positive floating advantage, check "I am aware of the risk and would like to sync positions right away". If you would like to delay synchronization until the floating profit on the supplier's account remains negative, check "Wait for better market conditions". The platform will not synchronize accounts and will not start copying commercial transactions until the provider's floating benefit is positive. Then click the "Close Positions and Sync" button. . During copying, the system periodically checks whether the item on the buyer's account matches the item on the supplier.
Action 1. To get started, try wait a bit calling back after some time. If this is a failure of the operator or just your subscriber is in the subway, where the signal level is weak, then, after showing a little expectation and endurance, you can get through to the person you need.
If it turns out that there is no correction, for example, if only part of the positions is copied, the system will try to correct the situation and copy the rest. In this case, unlike the initial synchronization, the provider's floating aggregate advantage will not be checked. If the subscriber has started to copy, he should follow the supplier's strategy as much as possible, copying some positions and not others.
Copy of commercial transactions, volume calculation
If the subscriber's account detects open positions, but not a signal, the system will offer to close them automatically, depending on the "Synchronize positions without confirmation" setting. After successful synchronization of subscriber and provider accounts, copying of business transactions is activated. All this happens automatically.
Action 2. In the case of blocking the subscriber's number for financial reasons, the most simple option solution to the problem will top up the mobile account of the person you are calling. It is possible that at the moment the latter is experiencing certain financial difficulties, and if you want to urgently call him on important business, then it will be easier to simply replenish his mobile account. Today, operators allow you to do this without any problems, using both terminals located nearby, and using SMS, online banking, and so on. Moreover, if your subscriber is in roaming and abroad, it is worth replenishing his account with a qualitatively larger amount than would be necessary for calls within the country.
When a supplier makes a transaction with a volume of 1 lot, an operation with a volume of 0.48 lots will be performed on the subscriber's account. After the balances are calculated, the usage of subscribers and providers is calculated. If the subscriber's leverage is higher than the leverage of the signal source, this does not affect the volume of the transaction to be copied. Otherwise, the volume of the transaction changes in direct proportion to the ratio of the leverage of the signal source and the leverage of the subscriber.
Balance transactions on the subscriber's account when copying
Volume computing in the case of a subscription can be found in the "Registration" tab of the platform. If after that the percentage copying of the signal has decreased to more than 1%, a forced synchronization of the subscriber's account with the provider's account is performed. This happens to correct the subscriber's current positions according to the new copy percentage.
Action 3. It is also worth trying alternative ways to get in touch with the subscriber. Use various online messengers, email, SIM cards of other operators, calls to mobiles of his relatives and friends, in a word, those ways that will help you contact the person you need. At the same time, by blocking incoming calls, operators often leave the possibility of receiving incoming SMS, so if you need to notify the subscriber about any event, you can try sending him an SMS message. In the best case, you will even be able to receive a response SMS, since the fee for the latter, even in roaming, is not so high.
View subscription on the platform
If the subscriber's funds have grown due to a balance or credit transaction, forced synchronization will not be performed. For more convenient operation a special icon is displayed in the Browser window of commercial accounts subscribed to signals. By placing the pointer on the name of a signal, information about the expiration of the subscription to this signal is displayed. The context menu contains commands for viewing the signal, as well as the ability to unsubscribe. The last command is only available if the this moment an active commercial account is active on the platform.
In extreme cases, you can call the hotline of your operator, tell about the specifics of your problem and ask if the operator has communication problems now and what you should do in this situation.
If an error occurs when they call you
Well, if they can’t get through to you, receiving the mentioned message “This type of communication is not available to the subscriber”, then you should look at your account balance, and also make sure that you have not accidentally blocked incoming calls to yourself (you can cancel the blocking by typing 002 # on your phone keypad or alternative code that is relevant for your device).
If the current enterprise account is subscribed to a signal, the corresponding icon is also displayed in the account status bar on the Operations tab. The "My statistics" tab shows the statistical indicators of signal copying. Here you can see the data of all signals for which a commercial account has been registered.
All indexes in the list are calculated only according to the transactions copied to the account according to the signal. Increase - an increase in the deposit, expressed as a percentage, calculated on the basis of the results of commercial operations, excluding withdrawal of money and replenishment of the account.
- Zoom chart.
- Signal - the name of the signal.
- Weeks - the number of weeks during which the signals were copied.
- One means that the amount of benefits is equal to the amount of losses.
- Subscription end date.
If you have been blocked for financial reasons, you should contact the nearest contact center of your mobile operator with your passport and the amount necessary to pay off debts in your account to correct the problem.
Conclusion
In the absolute majority of cases, the user receives the message “This type of communication is not available to the subscriber” when calling an MTS subscriber number that was previously blocked by the operator for financial reasons. To unblock the possibility of incoming calls to this number, it will be enough to pay off the financial debt on the specified mobile account, which will allow you to make and receive calls to this number in standard mode. It also does not hurt to check your device for accidental blocking of incoming calls - if this, nevertheless, happened, then use a special code to unlock the latter on your device.
The first mouse click on the column heading is ordered by the first index, the second click is ordered by the second index. To unclassify, click on the top row of the increment graph column. If your subscription is expiring and you want to continue using it, you need to renew it.
On the top signal command bar, click the "Increase Subscription" button. Check if the data is correct. If you agree to the terms of the subscription, pay for this extension in the same way as you would for a new subscription. If you do not want to continue copying signals in accordance with the subscription you registered earlier, you can unsubscribe.
In contact with
Beeline subscriber is temporarily unavailable due to connection quality
To go to the administration of the subscription on the platform, open the page of any signal. On the panel above, you will see the phrase "You are already subscribed to the signal." The signal name is a link, follow it to go to the signal page. To cancel the signal, click the "Cancel subscription" button. A confirmation window will open to cancel the subscription.
They define the terms of the Services and the terms of use of the Application. Access to the Services by the User is subject to prior acceptance of the Terms of Use. The user will accept the Terms of Use by clicking to accept the Terms of Use or by creating their user account.
A radio channel passes between the Beeline base station and your phone, which is responsible for the quality of communication. If there are any obstacles in its path, for example, dense buildings, then the signal level may decrease. You can notice this by the number of bars on the icon, which is located in the upper status line of the screen: if there are three or four, then the signal level is good, if one or two, then the minimum.
A similar situation can be observed in the subway, in underground passages, elevators and basements.
Beeline subscriber unavailable due to line damage
Sometimes you can hear "the subscriber is temporarily unavailable", which means that you will not be able to reach the person due to problems with the wired or optical channel.
Everyone knows that when transmitting a signal, the Beeline mobile operator uses wired and optical (fiber) communication lines. If they are damaged, for example during construction works, then the signal will disappear for a while. And at this moment, on the other end, you can hear that the Beeline subscriber is temporarily unavailable. The same situation can be observed during power surges.
Beeline subscriber is unavailable due to problems with the phone
It happens that we cannot get through to a person because he has connected the option or even completely turned off the phone. For example, during a court session, it is forbidden to use means of communication, so you will not be able to get through to this number until the owner turns on the device again.
Also, a Beeline subscriber may be out of the access area due to a breakdown of the mobile device. Until he fixes it or puts the same SIM card in another phone, you won't be able to call him.
Well, the rarest reason why the Beeline number is unavailable is the theft of the phone. In this case, the SIM card is usually thrown away, and no one can call the number registered to it.
How often instead of the expected voice in the receiver right person indifferent is heard: "The subscriber is temporarily unavailable." And if you are sure that the battery is charged, and you know for sure that this person was not going to turn off the phone, then what can cause the lack of connection, why sometimes you can’t get through?
- What it looks like when the connection fails:
Corresponding sound signals and the voice following them, broadcasting that "the subscriber is temporarily unavailable";
Short beep and call rejection;
The absence of beeps, signals and messages - silence and call rejection.
If we exclude the malfunction of the telephone itself or the SIM card, one reason for the lack of connection remains - disruptions in cellular communications. First you need to understand the mechanism of its work.
Essence mobile system is based on the division of the area into several sectors (“cells”), which make it possible to use radio frequencies repeatedly. Moreover, cells that are not “adjacent” to each other can use the same frequency. The quality of cellular communication depends on the frequency at which your phone operates.
When you make a call by pressing a button on your device, a radio signal comes from it, overcoming a thorny path from several instances (operator's base station, controller, switch, etc.) until the connection starts and the signal goes back.
Modern systems over the years of existence have improved the process of cellular communication and now guarantee the reliability and high speed of the connection. However, there are still problems. You yourself, probably, can give examples when the connection is lost - in the elevator, in basements, In the underground. The reason here lies in the massive obstacles between your device and the base station. Often the signal cannot overcome the thickness of the earth or even thick walls, the connection may be broken in conditions of close proximity of houses.
The reasons for the disruption of the network may lie in the banal overload of the station. For example, at the time of the New Year, everyone starts calling each other with congratulations and holiday messages, as a result, the stations or switches cannot cope with the huge volume of signals, as a result of which the possibility of connecting with the desired subscriber becomes unlikely.
Communication may be interrupted due to changes in weather conditions - loss of a large number precipitation, thunderstorm, hurricane.
Mechanical damage cannot be ruled out optical cable, failure of computers at the station.
Before calling the cellular company to which your phone is connected, check your device, perhaps rebooting it will give the desired result. But even if nothing has changed, try not to be nervous and calmly explain to the operator what the problem is. the main task any cellular company - to provide communication services that satisfy the client, and if any problems occur, they, as a rule, do not depend on the human factor, and are eliminated quite mobilely.
Articles and Lifehacks
Surely, many of us previously had to deal with a situation where, when calling another person, we hear a message that he is unavailable. So, what does "the subscriber's phone is temporarily unavailable" mean?, and what are the reasons for this? Let's look into this issue, noting right away: not at all a fact, - it may work out later to get through.
The phone of the other subscriber is temporarily unavailable: what does this mean?
Most often, we hear a message that the user is not available, for a completely banal reason. For example, the other subscriber could simply turn off his phone, or be outside the coverage area of \u200b\u200bthe cellular network. The latter situation is possible somewhere in a remote area, as well as in the subway, basement, elevator, airplane, abroad, etc. Often, the user simply runs out of battery, and the mobile device turns off. In any case, as soon as the device is turned on, this subscriber will receive a message about a missed incoming call.
So, now we know what it means "the subscriber's phone is temporarily unavailable." Similar situation can happen for a variety of reasons. It happens that the mobile device of another subscriber is simply lost, or someone stole it. What are the most common reasons?
The phone of the other subscriber is temporarily unavailable: the most common reasons
So, if another person's mobile device is temporarily unavailable, most likely, it is simply discharged, and there is no possibility to recharge it at the moment. Of course, she could not play a role in this. Often, the subscriber is really located where the cellular network signal is extremely weak or non-existent.
Often, the base stations are overloaded, and we simply cannot contact several clients of one or another operator at once. This can be observed in holidays. Sometimes problems can even be caused by adverse weather conditions - for example, snowfall or heavy rain, which damages digital transport channels.
Oddly enough, the above situation is no less common, in which the subscriber himself turns off his mobile device. The reasons can only be known to him alone; one way or another, his number becomes temporarily unavailable, and no one can get through to him.
It is noteworthy, but problems are often caused by the fact that the device “freezes” in the process of using any application and calls are not received. Callers who try to call hear a message that the user is temporarily unavailable. If the situation is not caused by some serious problems in the hardware or software(most often these failures happen on smartphones), a normal reboot will help.
In conclusion, we note another interesting situation. If the subscriber uses only one SIM-card and at the same time actively surfs the Internet, we may not be able to get through to him from the very beginning either.
