IN Lately On the shelves of construction hypermarkets and on the virtual windows of specialized online stores, you can increasingly see wide ranges of meter wallpaper. They differ from rolls of standard sizes by almost 2 times, having a width of 1 meter, or more precisely, 106 cm.

What are their main advantages when compared with their usual analogues and how to choose them correctly? And most importantly - how to glue correctly wide wallpaper? After all, over the years, many of us have become accustomed to gluing standard floor rolls meter width. So let's move on to look at these interesting questions.

Detailed instructions: how to glue meter-long non-woven wallpaper

The process of gluing meter-wide non-woven wallpaper includes several main stages. Let's look at each of them in more detail and find out how to glue meter-long wallpaper:

• Preliminary preparation of the wall. We remove the old wallpaper and remove any remaining unevenness in the form of paper and other residues. The advantage is the fact that wallpaper with a non-woven base is not afraid minor irregularities surfaces, chips and scratches on the walls and partitions of the room. In addition, if the prepared working surface is slightly rough, this will be rather a plus before starting work.
• Then you need to close all windows, vents and other sources of drafts. It is recommended to close even technical ventilation openings. Moreover, it is allowed to open vents and windows only after completely dry glue, which can take from 24 to 72 hours. It is also recommended to turn off the power for a while, remove the sockets, remove them from the walls various elements fasteners: nails, screws, etc.
• and wall surfaces. Be especially careful when purchasing adhesive as it must match the type of wallpaper. The process of preparing the solution itself is not complicated and even a non-professional can easily do it with their own hands. Pour water into a pre-prepared container and gradually add dry glue, while stirring with a small stick or other available means. Read the glue instructions: it says how long it will take for the solution to harden sufficiently and be ready to start work. As a rule, you will not have to wait more than 10-20 minutes. Once the glue is ready, you need to mark the wall. Considering that this is non-woven, and, moreover, meter-long wallpaper, it is necessary to take into account that they will need to be glued at the joint - this is exactly what will be correct. As reviews and expert advice say, it is better to start gluing from the window, moving deeper into the room. As for the first sheet, align it vertically with a plumb line, and draw a line with a regular pencil using a long meter ruler.
• The next stage is cutting wallpaper for gluing. Leave 10 cm at the top and bottom as a margin. After completing the work and completely drying, you can remove excess (left in reserve) sections of wallpaper using a previously prepared sharp knife.
• Let's start gluing. Having successfully completed all the previous instructions, you must proceed to next stage works - directly to gluing. Before applying the glue itself, you need to mix it again. After this, we proceed to applying the adhesive layer. This is done using a wide brush for wallpaper glue. As you know, non-woven wallpaper is not coated with a layer of glue. It is enough just to apply it to the surface of the wall. Applying a layer adhesive solution, gently smooth out the wallpaper. This stage must be performed efficiently and conscientiously, taking into account that you are gluing wide meter-long wallpaper. If necessary, straighten the wallpaper, level it and get rid of air bubbles using a special plastic spatula for leveling wallpaper. Smoothing can also be done using a plastic comb or roller, downwards and away from the middle of the wallpaper sheet. Remove excess glue with a small sponge or rag.
• We continue gluing the remaining cut sheets. . If necessary, you need to accurately select the pattern so that it matches the adjacent sheet of wallpaper.

Advice from the experts! Since meter-long wallpaper is much wider than standard wallpaper, it is recommended that two people hang it together. Therefore, before starting work, find yourself an assistant - it will be much easier to work with him.

Pros and cons of gluing meter-wide wallpaper

Before gluing 1-meter wallpaper, it will be useful to learn about their advantages, as well as some disadvantages. The fact is that only after a detailed study of the pros and cons of gluing wide canvases, you will have a more or less accurate idea regarding the choice in favor of one or another option.

Advantages

The advantages certainly include the following points:

• After repairs, fewer joints remain on the wall.
• and execution of work. After all, even despite the fact that meter-long wallpaper has O The thicker thickness compared to standard analogues is still easier to measure and glue 15 sheets than 30.
• You can save additional money, since the price of one tube of wide meter-long wallpaper, although slightly, is still lower than that of two tubes of standard-width wallpaper.

Disadvantages of wide canvases

Of course, one cannot fail to mention some disadvantages:

1. Difficulties in fitting wide non-woven wallpaper to the adjacent, already pasted canvas, in contrast to traditional analogues.
2. Difficulties with gluing alone. Unlike rolls of regular 53 cm width, working with wide rolls requires an assistant.
3. Necessity better preparation surfaces of the walls before gluing, in order to better fit one sheet to another.

We hope that now you have more clarity on how to properly glue meter wide wallpaper. This coating, as we have seen, has a number of significant advantages. We wish you a successful renovation!

Wide wallpaper is a real wonder for a novice builder. Our compatriot is accustomed to using standard canvases. But along with this, there are wallpapers that have a larger roll width, and the approach to work in this case changes radically. Although this material is from regular wallpaper not much different, but significantly reduces the effort spent on repairs due to its increased width. From this article you will learn how to properly glue wide wallpaper, how to choose it wisely, mark the wall and paste the entire room.

What types of wide wallpapers are there?

Almost all Russian wallpaper products are this moment produced according to a certain standard - most developers are familiar with wallpaper 53 centimeters wide. Wallpaper foreign production are presented in a richer assortment, but at the same time they often have non-standard widths. For example, wallpapers of Italian and German manufacturers, whose products are quite widely represented on our market, have a working width of 106 or 70 centimeters.

And the special size wallpapers that are presented in model range Belgian companies make up a collection with roll widths of 90, 100 and even 140 centimeters. A number of models from the famous French manufacturer include wallpaper with a width of 90 and 70 centimeters. If after consideration various options wallpaper, you have chosen a wide size for yourself, then you just need to figure out the question of how to glue wide wallpaper.

Wide wallpapers have a non-woven base, so they do not require impregnation with glue. To achieve the desired result, you just need to smear the prepared wall with adhesive and place a dry cut sheet on it. However, you will have to first level the surface using finishing and starting putty. If you don’t take this “little thing” into account, you will definitely end up with mismatched seams.

However, you should not think that wide wallpapers are represented exclusively by non-woven fabrics. With the same success, the canvas can be paper, light, heavy and used with other glue in combination.

Advantages of wide wallpaper

But before choosing and pasting wallpaper, it is worth talking about the advantages of the size of wallpaper chosen by the consumer, which are especially attractive to ordinary consumers. The most obvious of these advantages is that the number of seams becomes noticeably smaller when working with wallpaper of this type.

It should be noted that wide wallpapers were specially designed to achieve the so-called “seamless” effect. The number of joints between pasted adjacent strips is reduced almost by half, which makes them invisible during repairs.

In addition, the use of wallpaper custom size significantly simplifies all procedures for gluing them. It is unlikely that any of us will doubt that cutting 5 pieces of wallpaper, treating them with glue and then gluing them to the wall is much easier than doing the same with 9 pieces of standard wallpaper. Of course, the effort and time spent on repairs in both of these cases are incomparable.

The cost of purchasing wallpaper material is also reduced, because with equal quality indicators, the cost of a wide roll is less than the price of two rolls of standard size wallpaper.

Disadvantages of wide wallpapers

There are no downsides to wide wallpapers, but there are some inconveniences when working with them. In this situation, it is recommended to very carefully prepare the surfaces for pasting. If the walls are poorly aligned, then high-quality pasting will be impossible. The fact is that defects and unevenness of the walls do not allow achieving ideal joining of adjacent strips of wallpaper.

Due to the large width, it may turn out that their total length will not be enough, and to cover the last couple of centimeters of the wall you will need to buy an additional roll. Due to the fact that the number of strips of wallpaper of this type is more difficult to adjust to the width of the wall than for standard wallpaper, a certain overconsumption of material is possible.

Another limitation that significantly affects the entire work process is that wide wallpaper is best glued by two people.

How to choose wide wallpaper

The peculiarity of wide wallpaper is that it looks a little different in a roll than after pasting it on the wall. Therefore, it is better to choose them in specialized stores, where there are samples displayed on the stand.

When looking at the rolls on display, you should start from the bottom of the stand, moving to the top, and then look at the middle samples. This should be done because human psyche designed in such a way as to protect a person from excess visual information. The gaze best captures what is in front of the eyes. Experienced sellers know this, and they place wallpaper that is not in great demand in the middle of the stand.

If you want to perform original design housing, buy all materials from one collection - borders, wallpaper, fabric for curtains. When choosing, give preference to wallpaper that has a quality certificate. Although there are rumors that vinyl wallpapers They are not particularly environmentally friendly, they are completely unfounded, but it is still worth asking about the quality.

Preparing the surface for pasting

The most difficult thing in working with wide wallpaper is preparation. work surface walls Preparing the surface of the walls for wallpapering with a large width should begin when the finishing of the ceiling has not yet been completed. In this case, you must:

• Remove the covers of sockets and switches, and then seal the holes with adhesive tape, which can be easily removed after work;
• Remove all screws, nails, dowels and plugs from the walls;
• Completely remove the old coating from the walls, making sure that even the slightest traces do not remain;
• Inspect everything carefully again.

How to glue wide non-woven wallpaper if the walls are not very smooth? In this case, it is necessary to carefully level the surface with a dry mixture or cover the walls with plasterboard. The latter technique makes it possible to perform internal thermal insulation, and this has great value If there is mold on the walls, you cannot glue wallpaper on such walls until the fungus and the causes of its occurrence are completely removed.

Primer of walls for wide wallpaper

On smooth walls, before pasting, it is imperative to apply a primer, which will close numerous microscopic pores. Its use will save the adhesive mixture, in addition, the glue will not be too absorbed into the wall, thereby ensuring the strength of the wallpaper. According to the rules, good adhesion of the base to the surface is recommended; this is precisely what is ensured by the primer, removing all dust from the walls.

By the way, if you spread glue on unprepared walls, some of it will be absorbed very quickly, and you won’t be able to complete the task properly. Before you begin gluing the wallpaper, the primer must dry completely.

If you use foam or other borders when finishing, you should note that they need to be installed on the wall before wallpapering. In the process of work, you will need a wide brush for applying glue, a special rubber roller, a long ruler, a pencil, a plumb line, scissors, a stationery or construction knife, as well as cotton rags.

Pasting wide wallpaper

When purchasing, it is recommended to check the compatibility of the selected adhesive and wallpaper. It is necessary to pay attention to the group of wallpapers, because according to the accepted classification the material is divided into light, dense and heavy wallpaper. When working with Not standard wallpaper It is customary to apply glue only to the wall, but check the instructions to be sure.

How to glue wide vinyl wallpaper so that the joints are less noticeable? Work must be started from the window and carried out in the direction of the incident light. When joining panels, it is imperative to maintain the design and pattern. It may take more than one roll of wallpaper, but the result is worth it - the wallpaper will look like a solid canvas on the wall.

In principle, the method of covering walls with wide wallpaper is no different from the method of working with standard wallpaper. Just like regular wallpaper, wide wallpaper should be glued starting from the middle and from the top. If some irregularities do appear, then you just need to make a small cut on the edge of the wide wallpaper and overlap the edges of the cut on the wall.

When gluing meter sheets, it is convenient to use two stepladders, because with such an organization of work, good alignment of the strips along the surface of the walls is ensured. In addition, no additional movements of the partners who glue the sheet are required.

How to glue wide wallpaper: step-by-step instructions

1. First, you should measure the length of the wall and calculate the number of whole strips that fit on it.
2. It is imperative to mark the first canvas, starting from the window and moving deeper into the room. At a distance of 105 centimeters from the corner, you need to draw a vertical line to the floor using a plumb line, pencil and ruler. In case the vertical angle does not match, leave one or two centimeters.
3. An important point is wallpapering in the corners, so attach special importance to this procedure. It is better to leave an overlap at the corner, which will later be covered by a panel on the opposite wall, but will not create an unsightly gap.
4. After this, you should cut the required number of whole strips for one wall with a small allowance in length. Coat the wall well with glue to the width of the panel, going beyond the marked line.
5. Start pasting together with an assistant. One person should hold the top edge, climb onto a stepladder and place the cut close to the ceiling line, a previously drawn horizontal line or border and to the marked vertical, the coincidence of which is adjusted by an assistant.
6. Smooth the material to the wall, displacing any air bubbles that have arisen, moving from the middle to the edges. Remember that you should not try to stretch the wallpaper horizontally, because after drying it will create a gap and the wallpaper will return to its original position.
7. The following canvases must be placed close to the previous ones, without gaps or overlap.
8. As a rule, it is not possible to get the exact number of whole strips per wall, and the last of them has to be cut off vertically. The panel on the next wall should be applied exactly from the corner, blocking it. Exposed glue at the joints is wiped off with a clean rag.
9. Excess wallpaper can be trimmed only after the canvas has dried, since otherwise the sheet may shrink in the corners, uneven gaps will appear near the floor and near the ceiling, which cannot be masked.

Taping inconvenient places

When using non-standard wallpaper, pasting becomes much more complicated difficult places in the room: corners, behind the radiator and areas above the openings. But it is easier to glue the ceiling with wide wallpaper, since two people still take part in this process, and the number of sheets will be significantly reduced compared to standard wallpaper.

To paste wide wallpaper behind the radiator, you will have to cut the roll into small pieces. The best option- cut several pieces from one canvas, which is intended for pasting a flat part, fortunately, the width allows this.

When pasting uncomfortable place difficulties appear that are associated with the coincidence of the pattern. If you can still guess the dimensions, then it is quite problematic to achieve a matching pattern. This procedure requires some design skills and experience and may not work the first time.

It is best to purchase non-woven wallpaper, because you can move it on the wall within ten minutes after sticking it on. However, under no circumstances should you take adhesive compositions, which contain additives for faster drying. This glue is intended exclusively for experienced workers.

How to glue non-standard wallpaper alone

Contrary to popular belief that only two people need to glue wide wallpaper, this job is quite feasible for one person. After all, the average width of the material is 106 centimeters, and the span of a person’s arms reaches at least 150 centimeters. That is, you can easily join the seams and perform alignment.

If you don’t manage to do everything smoothly the first time, don’t despair. You can always remove the canvas, coat the wall with glue again and repeat the process again, taking into account the mistakes made and watching how to glue wide wallpaper in the video. And, of course, remember that everything must take place in indoors, where drafts are excluded. Doors and windows can only be opened every other day.

Finally, I would like to present to your attention a few simple, but useful tips, which can be useful when covering rooms with non-standard wallpaper. You should prepare in advance all the necessary arsenal of tools that you will need to complete the gluing work. This way you can avoid wasting time during work and save money. cash. If necessary, you can use leveling aluminum corners, which are carefully puttied.

But it’s not enough to know the technique of sticking wide wallpaper; you also need to understand how to stick wallpaper in an original way in order to end up with a spectacular interior. For these purposes, several types of wallpaper of different shades and textures are usually used simultaneously to add variety to the design of the room. Even novice designers should know that combining wallpaper can hide the shortcomings of a room's layout and highlight its advantageous aspects.

For example, horizontal alternation can visually reduce the height of the room, while vertical alternation can expand narrow passages. Methodology " accent wall» helps highlight the main piece of furniture. Wallpaper inserts are an independent decoration of the interior.

Thus, subject to the rules and recommendations described above, wide wallpaper will advantageously decorate your room, and as a result you will get an incredible effect seamless coating. If desired, meter-long wallpaper can be of any color and any texture, from the most different materials. When choosing a roll, be sure to pay attention to the recommendations regarding application and characteristics of the canvas.

Wallpaper on a non-woven basis is not uncommon today; you won’t surprise anyone with it. But wide canvases are still a novelty for Russians. Meter-long wallpaper made from non-woven fabric or based on it is produced European manufacturers, in Russia they are limited to the standard roll size - 53 cm. By the way, meter wallpaper is called conventionally, its actual width can be different - from 90 to 140 cm. The material, like others, has a number of pros and cons. You need to familiarize yourself with the features before buying wide wallpaper.

Advantages and disadvantages of wide canvases

Here we will consider the characteristics of not only those coatings that consist entirely of non-woven fabric, but also vinyl coatings with a non-woven backing. These materials are very similar in performance; they are also installed using the same methods.

So, wide wallpapers are convenient because:

• they form fewer joints - thanks to large size, more voluminous patterns are placed on the canvases, it becomes easier to select and combine fragments of the pattern, the canvases after installation are one whole - the seams between the stripes are almost invisible.
• Installation is faster - instead of two standard strips, only one needs to be cut, applied, leveled and trimmed.
• Material costs are lower - the price of a meter roll is less than the cost of two standard ones from the same manufacturer.

All the disadvantages of meter-long canvases are associated with the peculiarities of their installation:

• They are difficult to glue alone, especially on the ceiling. But, if you couldn’t find a partner, you can still hang meter-long wallpaper yourself, you just need to be patient.
• More difficult to buy optimal quantity material - there is a risk that a few centimeters of coating will be missing or, on the contrary, almost a whole roll will remain. In this regard, it is easier with narrow canvases - if there is any surplus left, there will be little of it.
• It is very problematic to cover a small room with wide strips; they will often have to be trimmed and cut (in corners, on slopes).
• It is permissible to use non-standard widths in rooms with slight deviations in dimensions - if the ceiling, walls or corners are very crooked, it will not be easy to join meter-long panels without distortions.

Summarizing the above, we can conclude: it is optimal to glue wide wallpaper in large rooms with a minimum additional elements(such as batteries, windows, doors, niches and arches) and with smooth walls. Rooms covered with plasterboard are ideal - all the corners there are correct and the surfaces are smooth.

Video on how to glue meter-long wallpaper together:

Installation of non-woven wallpaper on the ceiling

With the advent of non-woven finishing, the fashion for wallpapering ceilings returned. This happened thanks to the versatility of the material:

• he has different surface(corrugated, smooth, plain or patterned);
• durable;
• easy to clean with a vacuum cleaner and a damp cloth;
• suitable for painting.

It is necessary to glue wide non-woven wallpaper onto the ceiling in the following sequence:

1. Prepare the surface - remove lighting, insulate the wires, clean the ceiling from the remnants of the old coating, putty and prime it.
2. If this is provided for in the repair plan, stick rosettes, baseboards and borders to the ceiling.
3. From the wall with the window at several points, measure a distance equal to the width of the roll. Connect the dots with a line.
4. Coat the resulting strip with glue.
5. Cut the fabric from the roll to a length slightly larger than the width of the room.
6. Apply the strip to the ceiling, aligning the edge with a corner or border, while also focusing on the drawn strip.
7. Use a roller to press the meter-long wallpaper, expelling air and excess glue in the direction from the center of the strip to the edges.
8. Glue the following strips end to end.

It is quite difficult to glue heavy non-woven wallpaper to the ceiling. To make them stick more firmly, the glue needs to be made thicker than indicated in the instructions. A thick composition is also easier to apply to the ceiling; it will not run or drip.

The ceiling is often painted; it is important to remember that this can only be done on a dry surface. After wallpapering, at least 3 days must pass before painting.

The trick with which wide wallpaper can be glued to the ceiling alone is shown in the video:

Instructions for installing meter-long wallpaper on walls

In principle, working with wide canvases is no different from gluing standard wallpaper.

All actions are performed in the same sequence:

1. Sockets and switches are removed from the walls, and the ends of the wires are insulated.
2. Remove various fasteners (nails, brackets, screws, dowels).
3. Clean the walls from the old coating (the paint is washed off, the wallpaper is moistened with water and scraped off with a spatula).
4. The uneven surfaces are filled with putty and the dried putty is rubbed with fine-grained sandpaper. You can also watch the video to see how to properly prepare a room for wallpapering:
   
5. Cover the walls with one or two layers of soil deep penetration. This must be done, especially on moisture-intensive materials (concrete, drywall, wood). The primer clogs the pores of the base, thereby preventing glue from penetrating into them. The adhesion of wallpaper and walls becomes an order of magnitude higher.
6. After the walls have completely dried, they move on to wallpapering. Glue for non-woven fabrics is dissolved in water, do this according to the instructions on the glue packaging.
7. Determine the starting point from which the meter-long non-woven wallpaper will be glued. Experts recommend starting from a corner - you need to step back 104-105 cm from it (with a roll width of 106 cm) and draw an even vertical line.
8. Coat the wall with glue.
9. Cut the first strip 5-10 cm longer than the height of the walls.
10. Align the top edge of the wallpaper with the line of intersection of the ceiling and wall, while simultaneously aligning the vertical edge of the canvas with the line drawn on the wall.
11. Press the canvas in the center and level it with movements in the form of a “herringbone” - from the center to the sides.
12. Using a roller or spatula, remove excess air from under the wallpaper.
13. Trim excess wallpaper from the bottom and top with a sharp knife.
14. Continue gluing solid wide strips to the next corner.
15. You can’t glue a whole strip into a corner - it can lead and wrinkle. From the outermost strip, the tape measure is moved around the corner by 1.5-2 cm, and this size is recorded.
16. A piece of the width of the resulting size is cut from the new strip.
17. The cut strip is applied to the wall coated with glue, aligning it with the edge of the previous strip.
18. If the second section of the same strip is more than 20-30 cm wide, it is used for pasting the adjacent wall. If there is too narrow a strip left, it is better to cut a new one from the roll.
19. A vertical line is drawn on the adjacent wall, departing from the corner the width of the next strip of wallpaper.
20. Apply wallpaper to the wall coated with glue, aligning its edge with the drawn strip.
21. A vertical cut is made in the middle of the resulting overlap in the corner. Excess wallpaper is removed and the strips are glued end to end. The seam should be invisible.
22. Continue working in the same sequence.

Important ! If the wide wallpaper is not too thick and the owner will not paint it, overlapping corners are allowed.

In this case, there will be no need to cut through the thickening; just roll the overlap well with a roller.

As you can see, there is nothing complicated in the process. Additional information can be found in the video:

Still, it’s better to work together - one person stands on a stepladder and aligns the canvas with the ceiling line, and the second aligns the wallpaper vertically.

Pasting difficult areas

Gluing wallpaper on flat walls is quite simple; it is a little more difficult to properly glue the corners. But the most tricky places are the areas behind the batteries, external corners and various decorative elements.

• Heating pipes are different, and depending on this, they decide on the method of covering the walls behind them. It’s not easy to do this job in any case, and with meter-wide wallpaper it’s doubly difficult. You can cut the canvas into small fragments and stick them separately. But this method is only suitable for plain wallpaper, you won’t be able to fold the drawing this way. An easier way, accessible even to a beginner, is to paint the space behind the radiator to match the wallpaper. This is done with a brush on a long curved handle; it is better to use acrylic paint.
• Wallpaper can be glued to external corners in several ways; they do not differ from the processing options internal corners. These are the overlap method and the cutting method. In any case, you need to overlap not in the center of the corner, but 3-4 cm from it.
• If provided ceiling cornices or borders, it is better to secure them before gluing the wallpaper. This will reduce material consumption (no need to leave an upper allowance), and it will be easier to trim the wallpaper.
• Floor skirting boards, on the contrary, are best removed. They will subsequently hide unevenly cut or too short edges.

Tips from professionals on gluing difficult areas are shown in the video:

The process of installing wide wallpaper on a non-woven base is not much different from working with standard-width material. And small nuances and tips experienced craftsmen easy to find in photos or videos.

The traditional width of wallpaper, familiar to us from childhood, is 53 centimeters. But wide wallpapers are becoming increasingly popular. If some owners square meters have already acquired a taste and began to give preference only to them, others still doubt it.

They don’t know how to glue meter-long wallpaper so that they can clearly see its benefits.

Advantages and disadvantages

Do meter-long wallpaper have any advantages? Without a doubt. Standard sizes wallpapers were changed for a reason:

1. There are fewer seams, and the boundaries of the meter-long coating are practically invisible. There is a feeling that the wall decoration is a solid canvas.
2. Spends twice less effort for cutting the roll, physical strength and time.
3. The budget is saved because some wide wallpapers are cheaper than narrow ones.

Foreign manufacturers offer different widths roll. In Italy it comes in 70 cm and 106 cm, in Belgium - 90, 100 and 140 cm.

Which wallpaper is more suitable for a small bedroom? The meter ones also look great. But be picky about the choice of material. The most environmentally friendly option is non-woven covering.

After purchasing a wide roll, you may encounter the following disadvantages:

1. With uneven walls and many protrusions, it is difficult to glue meter-long wallpaper.
2. It is unlikely that you will be able to glue them correctly and beautifully without an assistant.

But all the disadvantages of a wide roll can be solved, right?

Preparation for gluing

Before you learn how to glue wide wallpaper, you need to ensure a smooth surface of the walls. First we remove the old coating.

To make old wallpaper easy to remove, spray it with water from a spray bottle and let the water absorb. After this, remove them from the walls with a spatula.

To facilitate the gluing process and for beauty, remove the external boxes of sockets and switches, screws, self-tapping screws, small parts furniture. If there are dents and irregularities, smooth them out using putty, sand and prime. Otherwise, defects may spoil the impression of the repair. The surface of the walls should become dry, hard and rough.

Tools

To hang meter-long wallpaper correctly, you need to prepare:

• level;
• putty knife;
• rubber spatula - for smoothing;
• scissors;
• knife, preferably a stationery knife;
• roller;
• brush;
• sponge;
• buckets for glue and water;
• roulette

Decoration Materials

Before you start wallpapering the room and cutting wide wallpaper, keep it there for at least 2 days. Be sure to check whether all meter rolls are from the same batch - look at the markings on the label. This is important because batch differences may differ in the shade of the pattern.

Continue to study the label. On it you will read about how to glue wide wallpaper by adjusting the pattern:

1. Counter docking.

On the label you will see arrows that are located in the opposite direction. This marking means that you need to alternate the direction of the roll webs, completely turning them over from bottom to top and vice versa.

The coating should be correctly glued to the same length and direction.

3. Free docking.

Don’t think about the design, but glue one sheet after another without adjusting the pattern of the meter roll.

4. Docking with offset.

The most uneconomical, complex and time-consuming option, because meter-long wallpaper will have to be adjusted.

Taking into account the manufacturer's recommendations, you can begin cutting the roll. Using a tape measure, measure the height of the walls, add 5 centimeters from each edge and cut into flat surface. After cutting, number each roll so you don't mix up the order.

Glue

Even before cutting the roll, prepare glue that should match its type. Pour water into a bucket and pour in the powder little by little, stirring in a circular motion. Before gluing, let the resulting solution sit for 15 minutes. The glue will swell and become more sticky.

Sticking

That's right - glue from a light corner. But don't expect it to be perfectly smooth. Using a level, draw a vertical line to guide you when gluing wide wallpaper.

Conduct renovation work at room temperature 18-20 degrees and at tightly closed windows and doors. Do not open them until new finish the walls won't dry out.

Carefully coat the wall with a roller and the corner with a brush. Why is it better to apply glue to the wall and not to meter-long wallpaper? If glue is applied to the canvas, it will become heavy and very wet. And raw material tears more easily and stretches greatly.

We apply the first canvas strictly along the line, the second - butt to the first, depending on the pattern. Once pasted, smooth it with a rubber spatula from top to bottom so that the wide wallpaper is free of bubbles.

Do not apply large excesses of adhesive as they will stain the surface of the finishing materials. If glue does get on the wallpaper, wipe it with a wet sponge.

How to properly cut off excess fabric from below? Place a metal spatula at the cut site and run a sharp utility knife around the outside of it. Cut, move the spatula and cut again.

After finishing the renovation, in which you used wide wallpaper, you will be convinced that it has greatly facilitated your work and decorated your home.

For some reason, many people believe that you can hang wallpaper yourself quickly and without special effort. To some extent they are right, but only partly. Because quite a large number of home craftsmen still live by old ideas about this procedure, when both the finishing material itself and the gluing technology were almost antediluvian.

What did it look like before? People bought cheap ones from the store paper wallpaper(others were simply not sold at that time, and were not produced), they quickly glued them on top of existing ones, without being particularly puzzled preliminary preparation, after which all that remained was to rejoice at the results of the “repair”. Today things are somewhat different. There are a huge number of different types of this on the market. finishing material, and the wallpapers offered are no longer paper, although there are such, but vinyl, fabric, non-woven backing, bamboo, etc. All of them are made from modern materials and based on innovative technologies, and therefore the pasting process requires a competent approach. Moreover, wallpaper today is available in various widths - from 53 cm to one meter six centimeters. And just like that, on a whim, without having at least minimal skills and sufficiently fundamental knowledge, you can’t pick them up.

No, of course, you can stick any trellises on the wall, but the result will not always please you. This is especially true for wide wallpapers, or, as they are also called, meter wallpapers. Not only are they quite difficult to work with due to large sizes, so they are also extremely capricious in terms of their demands on the surface to be pasted. And therefore, anyone who is thinking about how to glue meter-long wallpaper should, before proceeding directly to the process itself, carefully study all the available information about it. Which, in fact, we intend to present below. Let's start with the basics.

What is meter wallpaper

The most important thing that a novice master should know is that such wallpaper can only be of two types. Either vinyl on a non-woven basis, or purely non-woven. The latter, as a rule, go for painting.

Non-woven fabric is, in essence, non-woven material, created on the basis of cellulose fibers, which are held together with a special polymer. It is much thinner than traditional paper wallpaper, but at the same time much stronger. It is this feature that every craftsman who is looking for an answer to the question of whether (meter or standard width, because there are also such) should know - it doesn’t matter. Because, having a lot of advantages, this finishing material has one significant drawback - it is extremely demanding on the surface being finished. And even despite the fact that non-woven wallpaper is quite capable of hiding minor defects and unevenness, before the gluing process itself it is necessary to carry out preparatory work. And sometimes quite large-scale. More on this later.

On the need to prepare the base surface

In the question “How to properly glue meter-long non-woven wallpaper?” The key word is “non-woven”, not “meter-long”. Of course, it is quite difficult to glue such a voluminous and heavy piece of wallpaper, the area of ​​which is more than two and a half square meters, beautifully and accurately without skill. However, this is not the main thing. If the finishing material is thin enough (and such wallpapers can be very thick and almost transparent to light) or have light shade, then, if there is a surface underneath that is not uniform in color, all this “geography” will be visible under the new coating. In other words: if the wall is dark, plus there are areas on it that are sealed with putty, then all this beauty will simply be visible under the non-woven material. Therefore, rule number one: you can only glue wallpaper on a surface of a uniform color. Preferably white.

Since the manufacturer suggests gluing meter-long wallpaper without spreading the finishing material (that is, only the wall is treated with glue), then base surface must be clean, dry and not absorbing glue at the speed of sound. This is the second rule.

And third. Since meter-long wallpaper must be glued strictly joint to joint (there can be no talk of any overlap), it is necessary that the base base be smooth. The presence of all kinds of pebbles and irregularities on it will not allow you to make a perfect seam.

It is with these rules in mind that preliminary work is required.

Preparing the wall

First of all, you need to completely remove the old wallpaper (whitewash, paint) from the wall. Then it is necessary to repair all cracks and other possible defects. Then there are, of course, several preparation options, but all of them, each in their own way, are not entirely suitable. Ideally, the wall should be puttied and primed. Even if not thoroughly, like for painting, since minor defects will be hidden under the wallpaper, but you still need to go over the wall with putty at least once. As a result, you will get a white, smooth surface that adheres well to the finishing material. That is, what non-woven wallpaper requires.

If for some reason this cannot be done, then it is advisable to carry out at least several types of work. First of all, you need to treat the walls with a deep penetration primer. After this, the walls will not “drink” the glue as much. And then, since it is strongly recommended to glue meter-long wallpaper only on a surface that is uniform in color, you need to treat the base with primer again. Only this time tinted. Thanks to it, the walls will turn white.

About the glue

Remember: no universal compounds should not be purchased. Buy glue designed specifically for non-woven fabrics. Since you need to glue meter-long vinyl wallpaper by coating only the walls, the composition for the work should be designed specifically for this type of work. That is, on the box with glue there should be an inscription: “For non-woven wallpaper.” As for the method of preparing the composition, the whole process is usually described in detail on the packaging.

Wall marking

After the surface is prepared, you need to start marking. By by and large, wide wallpapers are glued in exactly the same way as narrow ones. The only difference is that, if there is large quantity doors (for example, in the hallway), it may be difficult to trim. Still, the canvas is quite wide. And, of course, without skills it will be quite difficult to handle such a heavy and wide piece alone. Therefore, the work must be carried out together. So, draw out the walls correctly. That is, figure out which side is better to start from, so that in the end you don’t end up with an inserted piece of a few centimeters in a visible place. Sometimes it is advisable to start pasting from the door, and not from the window. Or even from the middle of the room. Once you have decided on the starting point, draw a vertical line on the wall using a plumb line or level.

Preparing wallpaper

Next, cut the wallpaper. It is not recommended to cut all the rolls at once if the wallpaper has a pattern. Do this gradually, as needed. If the finishing material does not have a pattern, then you can cut all the wallpaper, adding five to six centimeters for allowances along the length.

Pasting

Since it is recommended to glue meter-long vinyl wallpaper on non-woven fabric only by applying glue to the wall, this is what you should do first. Carefully coat the area to be covered with a roller or brush. After this, standing on the table (a stepladder will not work in this case due to the width of the wallpaper), attach the first canvas to the wall, focusing on the outlined line. Leave a small margin at the top. Then, using a rubber roller, begin to smooth the canvas from top to bottom, while carefully ensuring that there are no bubbles. After this, remove any remaining glue with a rag and cut off the top and bottom. The next canvas is glued in exactly the same way, but strictly joint to joint. And so on until the corner.

How to glue meter-long wallpaper in corners

If you are sure that the corners in the room are 100% even, feel free to roll the wallpaper onto the next wall and continue gluing further. Just coat the corner itself with more glue. If there is no such confidence, the canvas will have to be cut. To do this, wrap it on the wall, carefully move the edge of the spatula along the corner, and then trim the wallpaper, stepping back half a centimeter from the intended line. Glue the cut piece overlapping into the corner, and then dance from its edge. If you start gluing from a corner, move the edge of the first canvas to the corner by a centimeter. Glue the second one onto it, too, overlapping under level control, so that all subsequent strips lie evenly.

How to glue meter-long wallpaper on the ceiling

This procedure has some of its own characteristics. As for preparation, there is only one option: the ceiling needs to be cleaned of whitewash, puttied and primed. It should be white, smooth and even. Then you need to attend to the preparation of the “scaffolding”. That is, arrange several tables so that you can move around them freely. Then we stir the glue, draw a straight line on the ceiling (we start marking from the window), measure the length of the first canvas (the distance from wall to wall with a margin of 10 centimeters). It is recommended to glue in length, not width. After this, we cut off the required piece of wallpaper and roll it up, but front side inside. We smear the ceiling with glue and begin gluing the wallpaper, gradually unwinding the roll and smoothing the surface of the finishing material with a roller. The procedure needs to be carried out only by two people (one glues and smoothes, the second unwinds and corrects). We cut off the excess, remove the remaining glue, glue the next strip in exactly the same way, joint to joint.

Conclusion

We tried to tell you in detail how to properly glue meter-long wallpaper. As you may have noticed, the procedure is not much different from that of working with conventional materials, except that only the wall needs to be coated. But to have such an opportunity and get in the end good result, this very wall needs to be properly prepared. Which is, perhaps, the most important nuance of this kind of finishing work.