One way to turn your bathroom into a place where you can not only wash, but also rest and relax is to install a mirrored ceiling in the bathroom. It's not that difficult, but you have to choose the type of ceiling. We will also look at its installation.

Pros and cons of mirrored ceilings in the bathroom

First, let's figure out why Lately It has become so fashionable to hang mirrored coverings in the bathroom, because today in almost every interior and design magazine you can find a photo of such a bathtub with mirrored suspended ceilings. The most important advantage is that such a coating visually expands the room - even the most small bath will look several times larger and more spacious.

The second advantage is that the ceiling in the bathroom will become smooth and even, without a single flaw, because the surface must be leveled and covered before installing the mirror structure. The third visible advantage is ease of maintenance.

To make the mirror ceiling in the bathroom look clean, you just need to wipe it with a soft cloth soaked in special means, once a week. To make work easier, wipe the surface with a dry cloth once a day.

True, it was not without its shortcomings. So, for example, such a ceiling will naturally be quite fragile. However, this minus can hardly be called critical, since the ceiling is rarely subject to shocks and mechanical damage. But caution doesn't hurt. The downside is the rather high cost of such coverage.

Requirements for mirrored ceilings in the bathroom

The bathroom is characterized by high humidity and temperature changes are often observed. Therefore, before choosing a material for the ceiling, let’s figure out what requirements the mirror surface must meet.

• Resistant to sudden temperature changes, steam, water and humidity. These characteristics must apply to both the ceiling and all fastening parts. There is no need to use non-moisture resistant plasterboard products, glue or putty.
  
• Easy to care for. Do not forget that the mirror surface will not retain its appearance on its own. If you are not ready for constant complex manipulations, then it is better to choose materials that are easy to care for.
• Structure weight. When choosing a material, pay attention to the weight of the ceiling so as not to create additional load on the ceiling. Thus, the lighter the coating, the better.
  
• Safety. Considering the conditions in the bathroom, you need to choose a coating that will not highlight harmful substances. In any case, it is better to avoid cheap and low-quality plastic here.

What type of bathroom ceiling should I choose?

Thanks to modern technologies Manufacturers can offer you mirrored bathroom ceilings from a wide variety of materials.

The first type is a slatted mirror ceiling for the bathroom. He can often be seen in photographs in various magazines. This ceiling consists of aluminum strips coated with mirror coating. Such profiles can be performed in the most various colors, thanks to which you can easily select the ones that suit the design of your bathtub. The main thing is that the colors of the slats do not contrast with the shade of the mirror panel. Despite the fact that the slatted ceiling can hardly be called completely mirrored, it is considered the most popular. And all thanks to the fact that slatted coverings are inexpensive, characterized by a long service life, and are not afraid of moisture. In addition, damaged slats can be easily replaced with new ones without completely replacing the ceiling.

Mirror polystyrene boards are the most difficult to install. They are plates with a self-adhesive back side. The main disadvantage of such a ceiling is the need for high-quality leveling of the surface. If slatted ceilings can be mounted on a surface with slight unevenness, then in the case of polystyrene slabs the ceiling must be perfectly flat. In addition, when gluing the slabs you need to be very careful; an assistant will not hurt. You need to glue it evenly, because it will be very difficult to tear off already glued slabs from the surface.

Suspended mirrored ceilings make it possible to hide communications (pipes, wiring) underneath. Their only drawback is their rather high cost.

A stretch mirror ceiling is a lightweight, thin film with a mirror surface. Such surfaces are not at all afraid of water, temperatures, and do not fog up. In addition, if your neighbors suddenly flood you, this ceiling will protect your bathroom from water penetration.

Installation of slatted mirror ceiling

As we have already said, the most popular is the slatted mirror ceiling in the bathroom. It is about its installation that we will now talk about. The first thing to do is calculate the amount of material. At the same time, remember that you need to take a little more than you need, so you can always replace the spoiled material. There is nothing complicated here. The slats are sold in 4 m lengths - just determine how many slats you need to cover the entire surface of the ceiling.

Don't forget to count the outer panels. Despite the fact that they most often need to be trimmed, the slats are considered as whole. The resulting number is the minimum required amount slats, and to be on the safe side, as we have already said, take about 10% more of the total amount of panels just in case. Installation work begins with markings for the end profile, the accuracy of which must be checked using building level. After installing the end plans, we proceed to installing stringers that ensure load distribution on the planks. The stringers are attached with self-tapping screws.

After that, we move on to installing the panels themselves. The first plank must be mounted at a short distance from the edge of the walls, after which the slats are secured to the stringers with a latch lock. The finishing slats also snap into place at the ends. On last stage work is installed by closing the remaining gaps between the walls and planks. That's all, the mirrored slatted ceiling in the bathroom is ready! All that remains is to provide him proper care so that the structure lasts as long as possible.

The desire to make the living space unique pushes us to search extraordinary solutions room design. Mirror ceiling in the bathroom is one example of thinking outside the box.

This approach guarantees not only a visual expansion of the space, but also demonstrates a bold design solution that brings the design of the entire bathroom to the forefront. new level. Reviews of the installed mirror ceiling in the bathroom are extremely enthusiastic.

Installing a mirrored ceiling in a bathroom is quite feasible for people with different levels of income. There are economical options and there are super expensive, luxurious designs.

Economy options for mirrored ceilings

Inexpensive mirrored ceilings perfectly imitate a mirror thanks to a special coating that can reflect light very effectively. The cost of 1 square meter of such ceilings ranges from $15 to $55.

This group includes ceilings:

• Tension vinyl
• Mirror slatted

Stretch mirrored vinyl ceilings

A very popular type of mirror ceiling. Its undoubted advantage is wide choice colored shades of the reflective surface. A suspended mirror ceiling in a bathroom looks most advantageous in combination with its other types. Especially with multi-level ceilings made from moisture-resistant plasterboard boards.

The mirror effect is mainly provided by the glossy surfaces of stretch ceilings. Darker shades increase the reflectivity of the vinyl. To maximize light reflection, manufacturers produce vinyl films with an additional layer, which significantly enhances the imitation of a mirror.

Installing a mirror vinyl ceiling does not differ from conventional tension installation:

• Along the perimeter of the room, at the level of the planned ceiling, special plastic or aluminum baguettes are placed
• Vinyl is heated with warm air to increase its elasticity
• Surface stretch ceiling straighten, align seams and tuck into baguettes
• After the vinyl has cooled, it will stretch, become elastic, and only under warranty will last at least 10 years.

But no matter how hard manufacturers try, it is not possible to achieve an absolute mirror effect in this version. There is a slight blurring of the lines in the reflection.

Stretch mirror ceiling

Mirror slatted ceiling

The slats for the suspended mirror ceiling are made of aluminum. To obtain a reflective effect, a chrome layer is applied to the panels and thoroughly polished. The quality is such that mirror slatted ceilings for the bathroom are very difficult to distinguish from real mirrors.

Installation of a mirrored slatted ceiling

Very simple and quick assembly of a slatted ceiling can be done even by a non-professional. Manufacturers have created an excellent construction kit, according to the clear instructions of which the suspended ceiling is assembled.

Short description build process:

• Making markings for the future ceiling
• We fasten the wall corners
• We hang guides for slats - traverses
• We mount slats with a mirror coating on them

Naturally, when assembling, we do not forget about lighting, which, with a mirror effect, is better mounted on slats.

The appearance of this ceiling is magnificent, but there are still minor flaws in the reflection.

Mirror slatted ceiling

The splendor of the mirror on the ceiling

A real, not imitation, mirror ceiling in the bathroom is a source of heightened and pleasant mood every time you take a bath or shower.

The mirror is polished glass 3–7 mm thick, with a thin coating of silver, bronze, titanium or, in a particularly expensive version, gold applied on one side. Unique combinations of coatings are possible that can give the mirror a colored reflection. The type of coating changes the shade of the mirror, but does not reduce its reflective characteristics. Silver plating is the most common.

Processing its edges at an angle of up to 45 degrees helps to maximize the beauty of the mirror. This finish is called bevelling. The ceiling made of beveled mirrors is breathtaking with its beauty and completeness of form.

Beveled mirrors on the bathroom ceiling

Design solution ceiling design can leave minimal joints between mirrors open or cover them under decorative narrow strips.

Placing mirrors on the ceiling in the bathroom guarantees 100% full reflection of light, but also significantly increases the requirements for personal safety. Mirrors are a rather heavy finishing material that requires very reliable fixation. Especially when it comes to the ceiling in the bathroom.

Types of installation of mirrors on the bathroom ceiling

When working with a mirror, precautions must be taken. The glass from which the mirror is made is a very fragile material.

Important! When accidentally broken, sharp edges are formed that can cause deep cutting wounds.

In almost all types of ceiling installation you will have to deal with cutting. The mirror must be cut to perfection flat surface glass cutter, which should be soaked in kerosene immediately before the process. The cut will be perfectly smooth.

Using a diamond-coated core drill, holes are drilled for the lighting elements. To obtain technological holes of small diameter, special diamond-coated glass drills are used.

There are three options for implementing the idea of ​​a ceiling made of mirrors:

• Fasteners based on special glue
• Using dowels and screws with rubber gaskets
• Kits suspended ceilings from manufacturers

Adhesive connection

The first option is very simple at first glance. In fact, it involves the ideal preparation of the site for gluing the mirror. It should be as smooth and durable as possible. Often it is necessary to pre-install a reliable suspended structure.

Important! It is prohibited to glue mirrors to the plaster layer. Adhesive installation must be carried out directly or at concrete floor, either on a moisture-resistant plasterboard or on moisture-resistant plywood.

In wall mounting a mirror, glue is applied to it inner surface, around the perimeter and cross to cross. When attaching a mirror to the ceiling, it is advisable to apply glue around the perimeter and in zigzags along the entire remaining internal plane. In this option, there is no threat of large pieces of the mirror collapsing if it is accidentally damaged, which could cause injury.

Important! In branded suspended ceiling designs, mirrors are used, with inside protective films, which will be able to hold all the fragments in the event of a destructive blow. There is a complete analogy here with car glass.

A significant advantage of the adhesive method is the ability to safely mount very large mirrors on the ceiling.

Fastening a mirror using dowels

Installing mirrors on the ceiling using dowels is reliable and simple. Because of heavy weight mirrors, in this type of installation their small sizes are used. Maximum length sides should not exceed 60 cm.

As a rule, holes for fasteners are drilled in the corners of the mirrors. Dowels must be placed under the screws rubber gaskets, and the dowel caps are covered with decorative overlays.

This method has an advantage. There is no need to install a suspended structure and ideally level the ceiling. Horizontal level The entire ceiling is leveled by the degree of tightening of the screws.

If the base ceiling is flat, then use a combined adhesive joint with dowels along the edges of the mirror.

Branded suspended structures

Well-known construction brands Albes (Russia), Geipel (Germany), Donn (Germany), Armstrong (England) offer various ready-made sets of suspended mirror ceilings.

Suspended mirror ceiling Albes (Russia)

The kits are a basic construction set. It is not difficult to assemble a suspended mirror ceiling in the bathroom yourself, without the involvement of specialists.

The advantages of purchasing a suspended mirror ceiling from companies with a professional approach are obvious:

• Comprehensive ceiling configuration
• Simplicity and ease of installation
• Gorgeous, thoughtful design
• Safe operation guarantees

All carriers and fasteners suspension systems T-15 and T-24 for mirror ceilings are made of either aluminum or galvanized iron.

15 and 24 are the width in millimeters of what is visible from below decorative covering profiles, which may have the following colors:

• gold
• matte gold
• chromium
• crimson
• matte black
• silver
• white

The main element of the ceiling in the bathroom is the mirror. Manufacturers offer different sizes and shades of colors.

Mirror plates in sets are supplied in the following sizes:

• 292 mm * 295 mm
• 395 mm * 395 mm
• 495 mm * 495 mm
• 595 mm * 595 mm
• 295 mm * 595 mm
• 295 mm * 895 mm
• 895 mm * 895 mm
• 1195 mm * 1195 mm

The following are offered color shades mirrors:

• Colorless (standard silver plating)
• Bronze
• Pink
• Toned
• Grey
• Blue
• Green
• Antique

There are two main directions for installing a mirrored ceiling in a bathroom:

• Diagonally across the room
• Parallel to the walls

The first option looks preferable, but involves a significantly larger number of mirror cuts.

If the choice is made in favor of the direction of mirrors parallel to the walls in the bathroom, then installation must begin from the far wall from front door. In this case, shortened mirrors will be located near the entrance and will be less visually noticeable.

Installation diagram suspension system mirror ceiling

Installing a mirror ceiling in the bathroom:

• We prepare the under-ceiling space. We clean it from peeling plaster and paint, prime it
• We mark the future flow
• We fix it on the walls decorative corner
• We mount load-bearing structure from connecting and transverse profiles and fix it with brackets on the ceiling
• We cut the mirrors closest to the walls, drill holes for the lamps
• We lay down the mirrors with holes for future lighting elements first.
• Installing lighting elements
• We place all the other mirrors on the structure

Ceiling installation is complete.

The price of a mirror ceiling in a bathroom, depending on the design, ranges from $40 to $150 per square meter.

A mirrored ceiling in a bathroom is not afraid of moisture, is completely environmentally friendly, looks amazing and brings the overall design of the room to perfection.

A photo of a mirrored ceiling in a bathroom invites you into a world of dreams. How can you not like this design? Of course not. True, there is one “but”: it is customary to wash mirrors with a solution ammonia or buy special cleaning products. Many people are tired of this even without a mirror ceiling.

And yet he is so effective and beautiful that you can take a risk. Caring for it is easier than it seems.

Not for walls or floors

All women know that if you forget to put a mirror in your purse, you are more likely to end up in an unpleasant situation. For example, if a speck of dust gets into your eyes, you can accidentally ruin your makeup, your hairstyle can suddenly be hopelessly ruined by the wind, your beret can move at the most inopportune moment - only a mirror can save you. It is a source of self-confidence. Men most often try to dispute this statement, using only a comb and a handkerchief.

Scientists have their own opinion about this thing. They established absolutely that it is rational to create a room with distorting mirrors, but not mirror room. Mirrors can get on your nerves. So you need to use them carefully to create a unique interior design.

It should be noted that large mirrors are often installed in public places. A wall of them, for example, is a ubiquitous element in gyms.

In order for the design of your home to be delightful, extraordinary, charming, and the room to be truly cozy, you still have to try. It’s better to spend a little more time creating a sketch, thinking everything through carefully, than to act at random and end up realizing that new design I still don't like it.

Some people like to go to the gym, or don’t feel the need to do so, while others hate working out, but understand that they need to work on themselves.

In the bathroom, most often there is one mirror. This is the standard classic way decoration, traditional. It hangs on the wall or near a cabinet mirror doors. The mirror floor is easy to break. So it turns out that it is best to make the ceiling mirrored.

Stretch mirror ceiling - a profitable solution

Stretch ceilings became a discovery for many people at one time. Modesty is alien to them, they can be truly luxurious, outshine even very spectacular, bright, stylish wallpaper, paint, whitewash.

Stretch mirrored ceilings in the bathroom are rational choice, because installation will not take much time and prices for this type of ceiling are often lower than for others.

In this case we are not talking about real mirrors. A mirror surface is created using PVC films. She looks great and that's not the only advantage. There are many reasons to choose this option.

Mirror pvc ceilings in the bathroom are relevant, created specifically for this room, are modern, reliable technology. Steam will not hide their beauty, moisture will not harm the surface, they contribute to the ideal distribution of light rays from spotlights or lamps.

Slabs and mosaics

A solid mirror surface may seem like a boring design. Everyone knows that a mirror needs a frame. One day you may want to complicate the design.

It might be better to choose beautiful ceiling with mirror elements? The design of mirrored ceilings in the bathroom implies different variants. Classic solution is a mosaic.

Mirror slabs different shapes, surrounded by other materials, create a complex canvas. This is a very successful move, you can’t argue with that. A tiled mirror ceiling is especially relevant if you want to adhere to romanticism in the decor.

Mirror stripes

Slatted mirrored ceilings in the bathroom will add lightness to the decor, if you want, or they can make the interior strict. The ceiling will consist of aluminum slats and mirror-coated panels. These elements are easy to install and the process will not take much time. The price is also reasonable, so you can take a bathroom and remodel it at any time.

Polystyrene boards

With the help of polystyrene plates it is easy even to redo the ceiling yourself. They simply stick to it - special glue is applied to one of the sides. You just need to buy them and, as they say, it’s in the bag.

There are, of course, disadvantages to these stoves, but there are few of them, or rather, only one. The disadvantage is that the ceiling surface must be absolutely flat. It is good if it is covered with plasterboard. If not, you will have to make additional efforts to level the surface. You will need to buy a primer, putty, and remove the original coating, possibly completely.

It's worth spending a few days leveling and preparing the ceiling. There is no reason to be upset; on the contrary, there is an opportunity to fully appreciate the rationality of the technology: gluing the slabs will only take a few hours.

Photo of mirrored ceilings in the bathroom

One of best options The decoration of the bathroom is a mirror ceiling. Lovers non-standard solutions have long appreciated all the delights of this original solution for bathroom decoration. It is modern, fashionable, beautiful and comfortable. Thanks to the mirrored ceiling, small space can be expanded - this is one of the main advantages, there are others worthy of attention. The modern market offers different types mirror designs for the ceiling in the bathroom. We will help you choose the best, most cost-effective and easy to install.

Bathrooms are most often small in size. For visual expansion spaces most often use light colors. This rule also applies to ceiling surfaces. A mirrored ceiling in the bathroom is lightness and volume. Light-colored ceiling coverings add height, and bright lighting highlights the finish of the floor and walls. Due to the reflective characteristics of the mirror coating, the illumination is greatly enhanced and creates the effect of spaciousness in small room. This trick has been used in the design world for a very long time. You can see how attractive and elegant it is in our photos.

High moisture resistance is another advantage of mirror structures. This is very important for bathrooms with high humidity. With proper installation there will be no problems with mold and fungal formations.

The materials used are environmentally friendly and therefore safe. They do not require special care, they look impressive and harmonious. In addition, behind mirrored ceilings you can hide all the unevenness and defects of the old coating.

This ceiling in the bathroom is a great chance for lovers of unusual experiments. Can be used combined options finishing and create compositions with different lighting effects.

The ability to mount the ceiling yourself is another plus of mirrored ceilings in the bathroom. For many who want to save money, this point is very important. Installation work is carried out quickly, without noise, dirt, dust and other repair inconveniences. Among the known options for installing mirrored ceilings, just choose the most convenient one and carefully study the technology. Everything will work out if you follow the instructions and be careful. Videos from our website will help you.

Stylish mirrored ceiling in the bathroom

Mirrored ceilings in the bathroom are not a cheap pleasure. In addition to the high cost, a significant drawback is its fragility, which requires careful operation.

Types of mirror ceilings

Let us highlight the main types of mirror coatings. There are few of them, each with its own characteristics and advantages. A mirror is not always involved in finishing; any reflective materials with a glossy surface are used and are in demand. In any case, the mirror ceiling in the bathroom looks advantageous and unusual, the photo is attached, all the advantages are noticeable.

Decorating a mirrored ceiling in a bathroom

There are expensive and budget options, when choosing, it is important to focus not only on price, but also on quality, so as not to encounter problems during installation and not to eliminate errors after installing the ceiling.

1. One-piece mirror. Very spectacular option finishing. If the bathroom area is large, you can try, but for small space This mirror design is not suitable. It is almost impossible to install such a ceiling yourself. We'll have to invite craftsmen.
2. Mirror slabs. One of the most popular types. It looks attractive and interesting, but there is a possibility of slabs falling out. The slabs are made of mirrors, the material is very fragile, so care and precision are required during installation.
3. Mirror panels made of plastic. The simplest and profitable option, since natural glass is not used in production. The panels do not break and are quite flexible. Among the disadvantages are flammability and the likelihood of moisture permeation.
4. Mirror slatted ceiling. The slats are made of aluminum and covered with a reflective layer. They are easy to install and clean, so installing such a ceiling in the bathroom is quite appropriate.
5. Mirror stretch ceilings. These are not real mirrors, so you don't have to worry about the mirror elements breaking or collapsing. This is a durable and moisture-resistant design with a long service life. In the manufacture of such ceilings, glossy tiles are used, which have excellent reflective properties.

Mirrored slatted ceiling in the bathroom

Installation stages and timing

The service life and visual appeal of mirrored ceilings in the bathroom depend on how well they are made installation work. The main thing in this matter is accuracy and precision.

Regardless of what type of mirror ceilings is chosen, the base must be thoroughly prepared before installation. This is a very important process; high-quality preparation will eliminate unevenness and dampness. After leveling, treat the ceiling with a mold and mildew remover, even if you have never encountered such a problem before. The base surface must be in perfect condition. The exception is slatted coverings; preliminary leveling before installation of such a structure is not required.

We will highlight three main types of installation work:

• installation of mirrors on a prepared and leveled ceiling;

This option involves gluing mirror slabs onto a leveled and carefully plastered ceiling. For exterior work, materials that are resistant to high humidity and temperature changes. It’s easier and faster to work with glue; the main thing here is to make clear markings and prevent the pattern from shifting. Gluing begins from the corner located opposite the front door. The cut panels will be invisible, and the last row will be located directly above the entrance. Reverse side the slabs are spread around the perimeter. Indent 3-4 cm from the edges. Then press it against the drywall and hold for at least 2 minutes.

You can use sconces for lighting. Using spotlights, you will have to install a suspended ceiling made of plasterboard. Ceiling covering falls by 10-12 cm.

Trimming is inevitable during installation. Take this into account when calculating materials. Typically, mirror slabs are purchased with a margin of 5-10% more than the total ceiling area.

DIY mirror ceiling in the bathroom

• installation of PVC stretch ceiling;

The horizon of the future ceiling is carefully marked on the walls. If you plan to install spotlights, the marks are made 10-12 cm lower.

Next, it is attached along the line harpoon profile. After installing the housings of the spotlights, the canvas is heated with a heat gun and secured in opposite corners. At the final stage, the lamps are installed.

• installation of a mirror ceiling similar to the Amstrong ceiling system;

The Armstrong system involves participation in the installation of the frame. The basis for it is a metal profile from which even squares are made. Frame construction It is quite easy to assemble, the main thing is to take into account that the dimensions of the squares correspond to the dimensions of the slabs. The frame is assembled from L-profiles (wall-mounted), T-profiles (longitudinal and transversely short) and universal hangers. A diagram and markings are made in advance. Fastening slabs with self-tapping screws requires maximum care and painstakingness; the fragile material can easily be damaged.

Mirror ceiling in the bathroom

Many people fear that mirrored ceilings in the bathroom are a lot of hassle.

When starting a bathroom renovation, many do not realize that this room has a number of specific requirements for finishing materials, room design and selection of furniture and fittings. So, when choosing materials, you need to remember that they must be of excellent water-repellent properties And appearance. Therefore, renovation of bathroom surfaces plays a vital role and, in particular, the final result depends on the choice of ceiling covering. Repair ceiling surface you can use a huge number of materials, but if you want to create a room with an exclusive design, you should pay attention to such finishing options as: glass and suspended mirror ceiling in the bathroom . Many will ask the question, “Why is this finishing option good?”, “What materials can be used to make a mirror surface?” and many more similar problems. Let's try to figure it out.

What material is suitable for a mirror ceiling in a bathroom?

Despite all the diversity finishing materials, for repairing a ceiling with a mirror coating in a bathroom, only those that meet the following requirements are suitable:

• Resistant to the negative effects of moisture. Since sharp temperature changes and the release of water vapor occur daily in the bathroom, ordinary finishing materials will quickly become unusable. But it should be remembered that not only facing materials must have special characteristics, as well as fasteners and finishing mixtures. For example, drywall, profiles, putties and others ordinary materials cannot be used without moisture-resistant indicators;

• Easy to maintain and unhindered access. To high quality finish does not lose its original appearance for as long as possible, it will have to be looked after. Therefore, the mirror ceiling in your bathroom should be easy to clean and have easy access to the surface;
• Minimum weight. To minimize the load on the base covering of the ceiling, you should select the lightest materials. Despite the fact that moisture has negative impact on finishing materials, so an additional load will accelerate the destruction process;
• Environmentally friendly coating. When choosing a finishing material for mirrored bathroom ceilings, you should pay attention to the manufacturer and price. That is, little or no unknown manufacturers, as well as cheap products, can be harmful to health and emit toxic substances. It must be remembered that quality material it doesn't come cheap. Particular attention should be paid to materials such as: plastic, stretch films and other materials containing artificial resins;

Tip: If the selected finishing product has bad smell, you need to carefully check the quality and attached documents for the material from the manufacturer;

• Ability to withstand significant temperature changes. The reason for frequent changes is hot steam and the operation of the hood, which supplies cool air. Due to this sudden changes negatively affect the durability of the material, it loses its appearance, and a favorable environment for mold and microorganisms contributes to rapid destruction. Therefore, you need to choose high-quality moisture-resistant materials, although they may be a little more expensive than usual, but they will last much longer.

Among all the above requirements for finishing materials, “real” mirror and glass ceilings for the bathroom have all the required qualities. That is, the surface is resistant to temperature changes and moisture, and dirt can be easily removed, and the most worthy quality is the environmental friendliness of the material.

Options for ceilings with mirror coating

Despite the fact that it is common to consider a mirror coating to be glass, there are now a lot of finishing materials with a glossy reflective coating, which can confidently be called “mirror”. And an accurate display of all the conditions in the room is not at all necessary. “What kind of mirrored ceilings are there for the bathroom?”

Panel mirror ceiling made of aluminum slats

Another finishing material that will create a mirrored slatted ceiling in the bathroom , is aluminum panel. Thanks to its glossy finish, such a ceiling can rightly be called mirrored, although the reflected environment will have blurry features, but luminous fluxes are fully reflected.

Used for fastening special technology, which is similar to the frame one for suspended ceilings, but here the panels are fixed in special longitudinal grooves. This installation method provides easy installation and dismantling panels if necessary.

Aluminum slats are produced in golden and silver tones, as well as with additional textures and images.

Among the disadvantages of the coating, one can note the difficulty in caring for the surface, especially with complex stains. After all, when cleaning, it is strictly forbidden to use aggressive detergents and powders with abrasives. As a result, the surface will become faded and unsightly.

Stretch mirror ceilings

Using stretch fabric you can get a mirror ceiling in the bathroom, although it is difficult to call it “real”. The reason for this is the properties of the tension fabric. It has a smooth glossy surface that can reflect light flows, but the display of objects and interiors is blurry. As the color of the film changes, the reflective qualities change, so the darker glossy surface, the better the objects in the room are visible. And the light film reflects only light fluxes, interior details are almost invisible. A stretch ceiling is more elegant than a “mirror” one.

Despite the imperfect “mirror” nature of the stretch ceiling, it is increasingly used in the bathroom and the reason for this is the ability to choose any color, pattern, 3D image, etc. Also, the canvas can easily withstand specific operating conditions, and the simplicity of the design allows you to hide any errors premises. Thanks to the properties of the film, it can withstand “floods” from neighbors without spilling a drop. And it won’t be difficult to wash off light stains; a regular detergent and a soft sponge are enough.

Among the disadvantages of such a ceiling, one can highlight the high cost of the material, although small room bathroom will not cost very much. Also, over time, from frequent “floods” and high humidity, stains may appear on the surface, in which case you will have to change stretch fabric fully. But this applies to light colors. Otherwise this is excellent material.

Suspended ceiling made of glass mirror slabs

It doesn’t matter what kind of mirror or glass ceiling will be installed in the bathroom, the main thing is to use only proven methods of attaching panels to the ceiling. After all, not adhering to technology or incorrectly chosen glue mixture, can lead to dire consequences over time. In this matter, you need to check all fastening methods and reverse Special attention using proven installation methods over the years.

Note! When installing panels directly to base surface, it must be in perfect condition. That is, not to peel off, crumble and be perfectly smooth.

If you adhere to all technological processes with mirror or glass panels, you can achieve stunning visual effects, and if the ceilings in the bathroom are low, such a design will take a minimum of height and will also visually enlarge the room.

As a fastening frame for such ceilings, they are used aluminum profiles, which are assembled into a slatted structure and the final result is a cellular sheathing. Then the frame is covered with glass or mirror plates, the latter will display everything the smallest details interior Therefore, the quality of wall and floor finishing, as well as furniture and plumbing fixtures must be of high quality. Otherwise, the old bathroom or floor reflected in the ceiling will only spoil the entire design and the end result will only be disappointment.

If you want to achieve amazing results using glass mirror materials, you can use: corrugated, with beveled corners, with engraving, rainbow effect, multi-colored and many other options for slabs.

In order for suspended mirror ceilings for the bathroom to have a chic look, you will have to think through the entire design of the room in detail, because the smallest imperfections will certainly be reflected in the ceiling. If you want to achieve stunning lighting effects, you should use slabs with beveled corners, in which the back light flux is reflected by rainbow rays. And the use of multi-colored or patterned slabs will help bring any design fantasies to life.

Among the disadvantages of this finish are the high cost of mirror glass slabs and the need for careful maintenance, but otherwise it is an excellent environmentally friendly and durable material.

What are the benefits of mirror and glass ceilings, their pros and cons

When choosing a ceiling finish for renovating any room in the house, you should remember that it does not matter what material is used. They have their shortcomings and undeniable advantages. But you definitely need to know about all the qualities.

Thus, a mirror and glass ceiling in the bathroom has the following advantages:

• Environmentally friendly and safe material. Using glass or mirror panels or slabs, there is no doubt about their safety, because they are made only from natural and environmentally friendly materials;
• Visual effect. Due to their properties, mirror and glass materials visually enlarge the room and add illumination with a minimum set of lighting fixtures;
• Easy care. This finishing method does not attract dirt, and mold and microbes do not multiply on the surface. Therefore, for cleaning it is enough to use a regular detergent and a soft sponge. But you should be wary of using scouring powders or chemical cleaners;
• Surface preparation. A suspended mirror ceiling does not require a perfect base coat finish. Usage frame technology allows you to hide many surface imperfections;
• Easy to install. In general, installing glass and mirror ceilings is not particularly difficult. Main, the right technology installations. For a small bathroom, it is possible to install the ceiling in a few hours.

TO negative traits mirror coating can be attributed to the high cost of the material, the soiling of the surface and the fragility of finishing materials (except for tension and aluminum slats). But if you properly care for it and avoid impacts and other mechanical damage to the surface, it will serve “faithfully” for decades.

Small conclusions

The use of mirror and glass finishing materials in the bathroom can become the highlight of the room. The most important thing is to adhere to the rules for choosing and installing the material. This finishing method is safe for health, because it is not exposed to the aggressive environment of the room. But having chosen this type of renovation, you should choose a detailed design of the room. To make your choice easier, you can read photo and video reports from designers or reviews from other owners who have already carried out such renovations. The main thing is that they are not afraid to bring their design fantasies to life, because modern materials allow them to become reality.