Many people are concerned about whether it is possible to remove suspended ceiling, and then install it back. The need to remove the tension flow covering may arise for various reasons. For example, if you have planned to move to a new place of residence and want to dismantle the tension fabric in your previous apartment so as not to spend money on buying new material. In addition, dirt may appear on the surface, to remove which it is necessary to dismantle the entire structure. Therefore, the question of whether it is possible to remove a suspended ceiling and then hang it remains relevant. Before answering it, we suggest that you familiarize yourself with the features in more detail. various types this material. This will allow you to understand in which cases the product can be removed and re-attached.

Main varieties

There are two main types of surfaces:

• Film. Such products are made from durable film made from polyvinyl chloride. The main advantage is water resistance, durability and unpretentiousness to operating conditions. They can be easily cleaned with a wet cloth and ordinary detergents. In this case, the surface will not be damaged and will not lose its original appearance. One of the most important advantages of such products is that, if necessary, they can be removed from the ceiling and reinstalled. If you are concerned about whether it is possible to remove the suspended ceiling and stretch it again, you should choose film coverings.

• Fabric. Products made from heat-shrinkable fabric are just as popular as film products. They have an attractive design and a pleasant texture in which the fibers of the fabric are visible. During installation work, the product does not have to be heated, so there is no need to remove it from the room during repairs. plastic structures which may melt under high temperature. I wonder if it is possible to remove the suspended ceiling and install it back? This completely depends on the installation technology you choose. If you want to ensure that there are no visible seams at the joints of the stretch ceiling and walls, you can use harpoonless technology, in which the edges of the material are cut close. But in this case, re-installation of the coating after its dismantling will be impossible. This can only be done if the installation is carried out using harpoon technology, in which the edges are not cut off, but hidden in special grooves.

How is dismantling performed?

The procedure includes several stages:

• Removing decorative inserts. First of all, it is necessary to remove the decorative rubberized inserts that are located between the wall and ceiling covering. Removing them is quite simple - you just need to find the places where adjacent fragments of inserts are connected to each other. Such places are reliably camouflaged so as not to spoil the interior of the room, so finding them can take a lot of time.

• Warming up the room. You can remove the canvas only at a certain air temperature (about 40–50 degrees), otherwise it may be damaged. To create such a temperature in the room, you need to use thermal gas gun. It should warm up not only the room, but also the canvas. IN last resort It warms up exactly the area of ​​the material that you are going to remove first.
• Dismantling the covering. Once the room has been heated to the required temperature, you can begin removal. This is done using ordinary pliers. Coating rectangular shape it is advisable to remove from the corners (for ceilings with irregular geometric shape it doesn't matter - they can be dismantled from anywhere). To avoid damaging the material, it should be removed from the profile with pliers using gentle movements. It is important to ensure that the area you are dismantling is heated with a gas gun. At the final stage, all that remains is to remove the fasteners that hold the profile from the walls.

Dismantling can cause certain difficulties for an unprepared person. If you have never carried out such work and have only a superficial understanding of it, you should not take risks by doing it on your own, because in this case you may accidentally damage the canvas. As a result, you will still have to call in craftsmen who will complete the work they have begun, doing it efficiently and competently. To use the services of specialists, just contact our company.

Why choose us?

If you want the installation or dismantling of the tension fabric in your apartment to be carried out top level quality, use the services of our company. This will provide a number of advantages:

• Saving. We offer competitive prices for building materials and construction services. You don't have to spend a lot of money on repair work.
• High-quality work. Our specialists have extensive experience, deep knowledge and professional equipment. This allows you to effectively and efficiently cope with even the most complex species installation work.

• Free consultation. Do you know if it is possible to remove the suspended ceiling and hang it again? Having difficulties choosing a material? Ask your questions to the manager of our company.

Contact us - and soon we will install a ceiling that will delight you attractive design and high performance!

Sometimes it becomes necessary to dismantle the suspended ceiling with your own hands in order to repair engineering Communication, hidden behind it, or itself ceiling structure. Let's figure out how this can be done.

To correctly remove the ceiling tension structure, you need to clearly define its type. Such information is always contained in the documents of the company that installed the ceiling in your home. If you don't have these papers, it's okay. You can find out the type of design yourself.

There are currently two types of ceilings being installed:

• Made from polyvinyl chloride film. They are installed using a technology that involves heating the material using special equipment up to 700 °C.
• Made from fabric - seamless. Installation of these is carried out without heating the canvas.

Installation of a ceiling made of polyvinyl chloride film

PVC structures are always removed towards the middle of the wall surface, starting from the corners. But seamless fabrics are dismantled the other way around - from the center to the corners. This is the first point to remember if you want to dismantle the stretch ceiling with your own hands. In addition, you need to find out what fasteners were used when installing the ceiling structure. If the installation was carried out using a wedge or glazing bead method, it is very difficult to remove such a ceiling yourself. Similar types Experts call fasteners disposable.

To remove the canvas, you will need to knock out a bead or wedge (it is impossible to do this without damaging the material). Such fasteners are rarely used. Only when ceilings are installed in low rooms (their installation requires a minimum distance of 1.8–2 cm from the floor slabs), and also when the customer decides to save on higher quality and modern fasteners.

The other two fastening methods - harpoon and clip - allow you to remove the ceiling structure without serious difficulties. The first is used exclusively for PVC products, the second - for fabrics. We will talk about how to dismantle structures with similar fastening systems.

To dismantle the structure, you should take the following tools:

• pliers (their jaws should be elongated);
• not very wide spatula plastering works(it is advisable to sand down its corners well with sandpaper or a grinder, and then wrap reinforced tape on the surface of the tool to reduce the risk of damage to the tension fabric);
• mechanic's knife;
• a screwdriver with a curved end;
• electric or gas gun for heating the ceiling material;
• stairs.

Let's start work. Freeing the room from extra items and things, cover the window openings with fabric (to protect them from excessive heating), and heat the room with a cannon. If you are dismantling a ceiling with harpoon mounts, you need:

1. Remove the (decorative) insert from the structure (do not forget that work is carried out from the corners).
2. Pull out the polyvinyl chloride sheet by the harpoon using pliers. Important! What you need to grab is not the ceiling material itself, but the harpoon. Otherwise, there is a high probability of damage to the material.
3. When part of the PVC product is released, put on work gloves and remove all the material by hand.

Dismantling PVC ceiling

Structures with wedge or glazing bead fasteners are dismantled according to a similar scheme. But you will need to additionally bend the aluminum profile with a spatula, otherwise you will not be able to release the glazing bead (wedge). The fasteners are pulled out very carefully using a screwdriver, the end of which is made in a curved shape.

After dismantling the PVC sheet, perform the necessary. And then install the structure again, performing all the described steps in reverse order. If you have some skill and knowledge in the field home renovation the whole process will not take you that much time.

Seamless fabrics are dismantled in much the same way as PVC. But in this case, everything is much simpler, because there is no need to heat the room to a high temperature. We remind you! Seamless structures are removed from the middle of the surface to the corners of the room.

You shouldn't have any problems with dismantling. The main thing is to do all the work slowly and as carefully as possible. But success reverse installation the ceiling depends on whether the installers left 2-3 extra centimeters at the edges of the canvas:

• if you have such a reserve, you can stretch the fabric relatively easily;
• if the material was cut end to end during installation, it will be impossible to stretch the material well.

Removing the fabric ceiling covering

Next important point applies to ceilings without seams with clip-type baguettes. Such fasteners do not allow the structure to be dismantled only partially. You will have to remove the entire ceiling (other fastenings make it possible to dismantle a certain part of the structure).

Important! When dismantling only part of the canvas, the material is guaranteed to jump out of the clip fastening. And then you will need to change the entire structure.

Now you know how to remove tension PVC or fabric ceiling. But you shouldn’t put your knowledge into reality if the canvas simply sagged under the mass of water that got onto it from the neighbors’ apartment above (or through a leaky roof). IN similar situations you can do without complete or even partial dismantling of the structure.

If you have been flooded, follow these simple steps:

1. Disconnect your home from electricity (turn off the circuit breakers on the panel).
2. Remove the chandelier on the ceiling (or Spotlights, if they are installed). There is always a hole under the lighting fixture. It is cut out when installing lamps.
3. Drain the water through the indicated hole.

Sagging ceiling sheet

Please note that draining the water cannot be done alone. One person must lift the ceiling sheet from below, thereby rolling the liquid on it, and the second must stand under the hole with some kind of container. The drained water gets into it.

After removing the liquid in the described way, the canvas with its inside will remain moist. It's OK. Leave the suspended ceiling alone. After some time the material will dry. Small folds will appear on it first. But they will quickly disappear once the fabric or PVC film is completely dry.

The stretch ceiling is quite durable and durable design, so today for many it has become the most popular and desirable. However, sometimes it becomes necessary to remove such a sheet. The reason for this may be a change in electrical wiring from the upper floors, or strong stretch marks. Also, the canvas can be changed if desired to have a different color and. Moreover, the film is removed along with the baguette and can be reused. Those who are faced with this question will be interested in knowing how to remove a suspended ceiling.

Do-it-yourself dismantling of a stretch ceiling, its complexity and features depend on what kind of fastening method was used to install the canvas. This information is in the warranty card. If such a document is missing, you should independently determine the features of the ceiling structure.

Modern suspended ceilings are based on polyvinyl chloride film, which is characterized by a high degree of elasticity, strength and environmental friendliness. This material is very susceptible to temperature changes. Thus, at temperatures above + 60°C, it acquires special elasticity and pliability, but as it cools, it hardens and becomes smaller in size. Therefore, during installation or dismantling work they use special device in the form of a heat gun.

Many people are interested in whether a suspended ceiling can be reused? The answer is simple - when correct dismantling, Can. It is important to know that such ceilings are very tear-resistant, but they can easily be damaged by catching something sharp, which will entail a complete replacement of the canvas. In general, the entire dismantling process includes several stages, each of which requires:

• proper preparation;
• good tools;
• actions according to the instructions.

Preparation

If you are interested in how to remove a suspended ceiling yourself, you should understand that this type of work can be quite complex and, in comparison with the construction itself, require a certain patience. At the same time, this topic is very relevant for most owners who have such structures installed in their house. So, if you need to dismantle a suspended ceiling, first of all, you should acquire special devices, materials and tools that are unlikely to be in every apartment. It is also worth preparing the room for such a process so that everything goes smoothly and accurately.

Tools

To work with PVC film, the materials and equipment required are quite specific, so you should prepare in advance. Before you begin dismantling the stretch ceiling, you should purchase the following:

• stepladder, strong table or goats;
• a heat gun, with the help of which the canvas is heated;
• special blades that have curved ends;
• clamps with cords, which are necessary to hold the removed canvas suspended;
• screwdriver;
• adhesive tape for installation;
• narrow pliers with long ends;
• insulation tape;
• construction knife.

Sometimes they invent their own tools for dismantling work. For example, a metal spatula that is used in construction is made narrower by grinding. This is necessary to ensure obtuse angles. When tools are dull, they are bent to ensure maximum easy access to the protrusion of the profile. It is important to process the spatulas and pliers using sandpaper to remove burrs and smooth out any irregularities. All devices used when dismantling a stretch ceiling should not have sharp corners or roughness, otherwise this will lead to tearing of the fabric.

When all the tools and equipment are prepared, you can begin the next stage of preparation, namely working with the premises.

Room

Dismantling of a stretch ceiling should be carried out in a previously prepared room. Therefore, it is worth performing certain actions indoors:

1. Removing all items that can be damaged by high temperatures, for example, plants, an aquarium with fish and animals, if any.
2. Removal.
3. Dismantling on the ceiling.
4. Protection metal-plastic windows, computer and other interior items that may be damaged by the operation of the heat gun.

After this preparation, you can proceed directly to removing the stretch ceiling.

Removing the film sheet

To remove a suspended ceiling with your own hands, you need to have information about what kind of fastening was used when installing the film, because the technology of dismantling work will depend on this. Thus, starting from this knowledge, the canvas is disassembled. It is important to understand that removing the entire ceiling structure and just one part of it has various principles and features that will also differ, based on installation methods and the chosen type of fastening.

Fastening systems

There are 4 different systems fastenings, each of which has its own advantages and can be used in certain cases:

• glazing bead;
• harpoon;
• cam;
• wedge mount.

It is worth considering the principles of each type separately.

Bead fastening system

The principle of glazing bead fastening is to use a special plastic profile, which has different sections. Such a wedge is inserted into the profile, while the canvas is pressed with special density. This system fastenings are used when installing structures with vinyl or fabric. To dismantle it you need to have a certain list of tools:

• putty knife;
• screwdriver;
• heat gun.

Having prepared everything you need, you should begin the process of removing the stretch ceiling. To do this you need to perform certain actions:

1. Ensure heating of the entire room using a heat gun while setting the temperature value to about +70°C. Such heating helps to increase the size of the canvas and reduce the pressure that is exerted on the fastening.
2. Remove the decorative plug.
3. Having chosen a certain corner in the room, squeeze out the outer wall of the baguette using a spatula.
4. Pry up and remove the glazing bead using a screwdriver.
5. Remove the canvas.

If there was a sufficient supply of fabric left when installing the stretch ceiling, then it can be reused.

Harpoon mounting system

The harpoon is a flexible plastic strip that is characterized by medium rigidity. Dismantling this type of fixation is easier than other clutch options. This is explained by the fact that the harpoon mount is characterized by easy assembly and the possibility of reusable disassembly of such a canvas. In this case, you should start removing the suspended ceiling from the wall, which is located directly near the corner. First, you should evenly heat the entire ceiling using a heat gun so that the canvas is flexible and stretchable. In this case, the heat flow is supplied at a temperature of 70°C. Sometimes owners practice alternately heating all corners, starting from where they first remove the harpoon, and use a regular household hair dryer. If the fasteners were removed in a certain place, it means that the entire canvas can be removed very easily.

The algorithm for removing the ceiling using a harpoon mount includes the following steps:

1. Detaching a decorative strip that is located around the entire perimeter of the room or on a certain side of it.
2. Uniform heating of the stretch ceiling, starting from the center of the room and covering all corners.
3. Search in the corners of the ceiling for a place with a large gap between the wall and the canvas itself.
4. Using a blunt spatula, the harpoon is pryed and lifted. To do this, move the spatula in different directions at a distance of 15 cm.
5. Using pliers, the free hook of the harpoon is grabbed and removed.
6. Further actions can be easily carried out manually, while carefully pulling out the film.

When the room is small, the suspended ceiling is removed without heating with a gun, but for large canvases, preliminary heat treatment is mandatory. It is worth noting that to install the canvas in its original place, the same actions are performed as during dismantling, only in the opposite direction.

Cam mounting system

The principle of cam fastening is to use a special plastic profile that has a cross-section in the form of a clamp. Dismantling of such structures is particularly simple and economical, because it does not require any heating of the room. It is worth noting the importance of taking special care, since the spatula has direct contact with the film when working.

So, to dismantle a suspended ceiling with a cam fastening, one of two methods should be used:

1. The work begins from the middle of the wall, where two screwdrivers are inserted in the place where the cams are located, the pressure of which will gradually weaken, which makes it possible to freely remove the film from the clamp. These actions continue until the canvas is completely removed.
2. Dismantling is carried out using a spatula, which is inserted between the cams. After that, the one that turns out to be movable is pressed. Thus, due to the tension of the web, the material will come out of the clamps. Next, the process is carried out manually.

It is worth noting that the material may have characteristic notches from the clamps. When re-installing, they will be useful as a kind of guide.

Wedge mount

The wedge fastening system is one of the easiest to dismantle. Work begins from the corner of the room. In this case, you should perform the following steps:

1. Disconnect decorative insert, which acts as a wedge. This will relieve the pressure that is placed on the plug area.
2. Use a screwdriver to hook the insert by the edge.
3. Remove the plug from the baguette system.
4. Remove the canvas from the frame.

The result of dismantling and re-installation in this type fastening depends directly on the skill of the master and on whether a small allowance was left by the installers. This fact is very important when reusing the canvas, since this will require tensioning the material, and if it is not enough, then it will be difficult to tension the ceiling again.

Features of removing fabric

There is no need to dismantle the fabric sheet high temperatures nyh modes. When a glazing bead or wedge fastening system is used, the canvas is removed in the same way as PVC. The only difference in this process is that work should begin from the middle of the wall towards the corner. Installation is carried out according to a similar principle.

The question arises - is it possible to reuse a suspended ceiling? Yes, it is possible, but it should be noted that re-stretching the fabric is possible if the installation was carried out in good faith, adhering to all the subtleties and rules. For example, if, when installing the covering, the edges were cut off closely, then the ideal tension will be difficult to repeat. After all, the fabric does not have the same capabilities as PVC film and it will not be able to stretch. But with a margin of only a few centimeters, it will be very easy to tension the canvas again. In addition, when dismantling, it is important to carefully and slowly carry out all necessary actions.

It is also worth noting that when installing fabric using clip-on baguettes, it is impossible to partially remove the ceiling. This fastening requires complete dismantling of all material. If these recommendations are not followed, the canvas may jump out of the clips, since the fastening is not so reliable. And with this outcome it will be necessary complete replacement the entire ceiling.

When removing the fabric sheet and its subsequent installation, it is necessary to regularly warm up the room. It is important to remember that it should not be as strong as when working with PVC. If you notice small unevenness, after installation, you should heat these areas with a heat gun, which will help them level out. These actions should be carried out without bringing the thermal device too close to the fabric to avoid deformation.

Thus, you can dismantle the stretch ceiling yourself, the main thing is to comply with certain requirements and technologies. To remove the canvas quickly and efficiently, you should follow some rules:

1. It is best to carry out dismantling with one or two assistants. This advice will ensure the accuracy of the entire work process and, importantly, safety.
2. When installing a ceiling, you should choose only high-quality materials.
3. When removing the blade, do not use tools with sharp edges. They can damage both the suspended ceiling itself and any finishing materials.

As we see, de installation work, as well as the installation itself, stretch ceilings are quite simple, but labor-intensive processes. This task is subject to independent implementation, if you have information about all its details and features, as well as act according to a certain technology.

Stretch ceilings in the former CIS countries are becoming increasingly popular, and for good reason. So-called “French” ceilings, with proper care, are durable and can last about 15-20 years. Although in most cases the tension fabric is not susceptible to any deformation ceiling tiles, sometimes there is a need to dismantle it, for example, if you are flooded by neighbors above or you need to repair communications above the canvas. Further in the material we will tell you how to remove a suspended ceiling with your own hands, preserving its original appearance and integrity, with the aim of re-installation upon completion of the repair work.

First stage

To figure out how to remove the stretch ceiling, you need to find out how it was secured. Information about the fastening method is usually indicated in the warranty card for the PVC structure along with data on the warranty period. We will be based precisely on this information. If nothing is indicated in the documents, you can find out everything yourself.

There are 4 methods for fixing the tension fabric on the frame:

1. Harpoon method. The most popular and simplest method of fastening the canvas. With this approach, a hard harpoon-shaped edge is welded around the perimeter of the canvas, which is inserted behind the frame, unbends there and maintains tension.
2. Cam or clip method. In this case, special plastic clips are used to secure the canvas. In this case, you can do without preheating the canvas. In addition, no additional decorative elements and plugs.
3. Beading fixation assumes that PVC film pressed against the canvas from the inside using glazing beads.

When attaching suspended ceilings using the last two methods, it is worth understanding that the film is in contact with the profile, so it is important to be especially careful not to damage it.

Specifics of working with PVC material

As a rule, suspended ceilings are made from PVC film - this option is cheaper than fabric, easier to care for and easier to install. Polyvinyl chloride film is very elastic, durable, and environmentally friendly. In addition, when heated to 60℃, PVC becomes even more elastic and can be stretched. As the material cools, it becomes denser and contracts. This property of PVC is used to create a decorative and beautiful stretch ceiling. A special one is used for the work. heat gun.

Although PVC film is very difficult to tear, it is sensitive to cuts from sharp objects. In case of such damage, the coating will have to be completely replaced.

The procedure for disassembling a stretch ceiling

To understand how to carefully remove a suspended ceiling, you should familiarize yourself with detailed instructions, purchase quality tools, and also treat the process with all possible responsibility.

Preparation stage

Before you remove the suspended ceiling yourself, you need to prepare the special tools that you will need during the work process.

For this task you will need:

• Special clamps for fixing the tension film.
• Heat gun – recommended use gas units, their power is quite enough to work in an apartment. If you apply electrical devices, you can damage the wiring, since it is not designed for equipment of such power.
• A narrow spatula for working with suspended ceilings (10 cm). It must first have rounded edges and ground off the edges to eliminate the possibility of damage to the PVC sheet.
• Standing structure - stepladder, table or sawhorses.
• A screwdriver with a curved end.
• Pliers with curved ends.
• Stationery or construction knife.

If all of the above devices are at your disposal, preparatory stage can be considered completed.

Preliminary work with the premises

Before opening the suspended ceiling, it is necessary to perform certain preparatory work:

• Remove from the ceiling lighting, which interfere with further work with the ceiling.
• Remove everything from the room houseplants, and also take out cages with pets or birds, if you have them.
• Cover furniture and interior elements that have not been removed from the room to protect them from the high temperature generated by the heat gun. This applies, inter alia, to window and balcony frames, plastic inserts on the walls and other decorative elements.

Upon completion of all this work, the suspended ceilings can be dismantled.

Dismantling the tension fabric

The answer to the question whether a suspended ceiling can be removed depends on what type of fastening was used during installation, as well as the quality of the fabric used. Based on the type of fastening, the process of dismantling the film will be slightly different.

It is worth noting that the approach to removing the entire ceiling or just a separate section of it will vary. Let's consider each option separately.

Harpoon mount

In this case, the process of how to remove suspended ceiling, will be the easiest to do. The fact is that the assembly principle itself involves repeated assembly and disassembly of the ceiling. Work on dismantling the canvas fixed in this way should begin from the corner.

Let's look at a detailed algorithm on how to remove dropped ceilings installed using the harpoon method:

1. We dismantle the decorative edging tape on one side or along the entire contour of the canvas in order to provide access to areas PVC fastenings films.
2. We determine the location of the slotted inserts that were fixed between the walls and the canvas. Let's dismantle these elements.
3. We heat the air in the room to 70 ℃ using a heat gun. This required condition successful film dismantling. The heated fabric will become significantly softer and begin to stretch, which will facilitate the work of removing it from the fastenings.
4. On next stage The most crucial moment in the process of how to properly remove a suspended ceiling comes. First you need to warm up the section of the canvas from which the work of removing the film will begin. On flat surface usually start from the corner, and on curved surfaces it does not matter where to start the work. Having secured yourself on the stepladder, take a dull spatula and use it to hook the harpoon. Then, using pliers, we remove this harpoon from the profile.
5. After this, we bend the PVC sheet towards ourselves.
6. Next, very carefully and slowly remove the film from the mounting profile, trying not to damage it. If needed, separate places additionally warm it up with a heat gun.

In the case of fabric canvases, the process of carefully removing suspended ceilings will look completely different. We'll talk about it in more detail a little further.

Cam fixation

The technology for removing a suspended ceiling mounted using the cam method is the simplest and least burdensome. You don't need a heat gun to implement it. However, since during the work the spatula is in direct contact with tension fabric, you should be very careful and attentive.

In this case, there are two main methods for removing a suspended ceiling:

1. We will need two screwdrivers. We place one of them between the fists in the corner of the room, and insert the second with a distance of 55-60 cm from the first. Thus, the pressure on a specific section of the ceiling will significantly decrease, and small area the blades can be removed from the mount. You need to repeat these steps until the required section of the stretch ceiling is released.
2. To work you need a spatula. It must be inserted between the cams and the movable element can be bent. This will create the necessary tension so that the PVC film comes out of the clamps. All other material can be pulled out of the grooves manually.

The clips always leave special notches on the stretch PVC film, which will allow you to mount the ceiling in the future exactly as it was installed before.

Bead fastening

In this case, in the process of removing the suspended ceiling and putting it back, you will need the following:

• the spatula mentioned above;
• screwdriver;
• heat gun.

The sequence of actions will be as follows:

1. First you need to warm up the room (using the same principle as before).
2. Remove the plug.
3. Using a spatula, starting from any corner, squeeze out the outer wall of the baguette. Next, use a screwdriver to hook the glazing bead and remove it.
4. We pull the glazing bead with our hands and remove the canvas.

If there was excess material left during the installation of the ceiling, then if necessary, the canvas can be inserted back.

How to properly remove seamless fabrics

To remove the old suspended ceiling as best as possible, if it is made of fabric, you do not need to warm up the room very much. If glazing bead or wedge fasteners were used, then the process of removing the canvas will be the same as in the case of PVC film, with the only difference being that the work should begin from the center of the wall with gradual movement to the corners. The situation is the same with installation. The quality of work performed by and large will depend on the accuracy and slowness of the operations performed.

If, in the question of how to remove a suspended ceiling and put it back, you still have to reinstall it, then the final success largely depends on how well the previous installers worked. If the material was cut end to end with them, then most likely this will not give us the opportunity after reinstallation get enough tension. This is because polyester does not have the same elasticity as PVC material. However, if the installation was carried out by professionals, then we can hope that they provided a few extra centimeters of canvas. In this case, no significant nuances should appear.

It is worth noting that before bending a stretch ceiling made of fabric and putting it back, if it was installed using clip-on baguettes, you need to take into account several nuances. Such ceilings cannot be partially disassembled - you will definitely have to remove everything at once, otherwise the canvas can easily come off the clamps due to the insufficient reliability of this type of fastening.

In the process of removing and installing a suspended ceiling, it will need constant heating, although in this case the heating may not be as strong as when using PVC material. If after installation there are minimal unevenness left, then do not worry - just warm up such places with a heat gun and they will easily level out. At the same time, do not lift it very close to the surface of the canvas, because, being plastic, such material can easily deform.

In order to remove the canvas around the entire perimeter, as well as the corner of the stretch ceiling, as quickly and efficiently as possible, we advise you to follow the following, quite important tips:

1. To ensure installation work is carried out accurately and safely, it is better if you are assisted by one or two assistants.
2. For installation of ceilings from tension material choose only high-quality materials.
3. Try not to use tools with sharp edges.

From the above we can conclude that dismantling a stretch ceiling is not difficult. Such work can easily be done with your own hands if you follow the basic recommendations and follow the technology.

Stretch ceilings are a beautiful and reliable solution for the interior, but sometimes it happens that it is necessary to dismantle the structure. There may be a need to change the wiring or drain the water. There are usually no difficulties in dismantling the structure yourself, but it is worth remembering that the structure will have to be reinstalled, and this is quite difficult to do without calling specialists.

It should be remembered that you cannot use pliers during dismantling, otherwise you may damage the film.

Due to the fact that there are several options for installing the structure, there are also several ways to dismantle suspended ceilings. To completely remove a stretch ceiling, you should know the type of its fastening. It is possible that complete dismantling of the ceiling will not be necessary; you can get by with removing only part of the structure. Each specialist uses the type of fastening that the customer desires. If the client knows what type of fastening was used during installation of the ceiling, then dismantling will be much easier.

Types of structure fastening:

• Cam mount;
• Harpoon mount;
• Wedge mount.

The first fastening option is similar to a clamp; in this case, the blade is guided by a cam during installation, which ensures reliable fixation of the blade.

The second type of fastening of the tension structure consists of a wedge, which is located in the groove of the baguette with the canvas already stretched. Further into the design is located ceiling plinth, an even more clamping wedge.

Fastening with a harpoon consists of a hook-shaped edging or a harpoon fixed in a special groove of the baguette. This type of fastening is created in production; it is soldered along the entire perimeter of the ceiling in accordance with the measurements of the room for which the canvas is made. This type of fastening is convenient because its installation and dismantling is easy to do independently, the risk of damage to the canvas in this case is minimal. The harpoon fastening does not deform the canvas, unlike the other two types of fastening.

Due to the fact that with wedge and cam types of fastening the ceiling contracts and changes its shape, re-installation seems impossible.

Therefore, it is necessary to ensure that removing the film during dismantling is really necessary; it is quite possible that only a few holes that were made for the lamps are sufficient.

How to remove a suspended ceiling yourself

To dismantle the cam-fastened blade, you need to use a spatula, it is best if it is made of plastic. During dismantling, the cam is pressed out and the film is carefully pulled out from under it. Next, the spatula is placed in the place where the canvas has already been dismantled and the film is pulled out again. You can remove the cam-mounted ceiling yourself.

To dismantle the ceiling with a harpoon, it is enough to remove the plastic insert from the baguette, then, using a spatula, pull the moving part away from the harpoon. The canvas is simply pulled out of the baguette with your own hands.

Removing a ceiling with a wedge fastening is easy; it doesn’t even require pulling out the canvas with a spatula. It is enough to remove the plinth, the wedge will loosen, then you need to loosen the baguette fasteners with a spatula.

Recommendations on how to remove a suspended ceiling and then install it

Removing the ceiling and then installing it presents some difficulties.

It is not always possible to dismantle the canvas in such a way that it remains undeformed:

1. If disposable profiles are installed in the room, then damage to the canvas cannot be avoided; you can simply cut the ceiling. Otherwise, you must first remove the plinth from the ceiling, and then dismantle the canvas itself.
2. The PVC sheet is dismantled using high temperature. To remove such a ceiling, it is necessary to warm the room to 50 degrees, and then directly the film. It is not necessary to warm up the entire room if dismantling is carried out independently. It is enough to heat the film so that it subsides, and then you can unscrew the screws using a tool. This is necessary so that the canvas subsides, otherwise it can be damaged during dismantling.
3. If some decorative elements are glued, they can be removed using tools, the main thing is to carefully and slowly move it along the product.
4. PVC ceilings installed with a harpoon and wedge system must begin to be dismantled from the corners. Film removal always occurs from the corner to the center. Needs to be carefully folded aluminum profile, if the ceiling is installed using a wedge. The main thing is not to damage the baguette; the tools must be blunt.

If you plan to install the ceiling again after dismantling, then the main thing is not to damage the canvas.

For seamless ceilings there is no need to heat them to high temperatures. The difference in dismantling with PVC ceilings is that you need to start from the center and work towards the edges.

Re-installation of such a ceiling depends on the accuracy of dismantling. Throughout the entire dismantling, it is necessary to warm up the canvas.

How to remove a suspended ceiling yourself

You can highlight several main points to dismantle the suspended ceiling yourself.

You should know that it is not possible to put the ceiling back in all cases; the decisive factor in this matter is the careful removal of the canvas.

Step by step instructions:

1. Determine what type of fastening the ceiling has in order to select The right way its dismantling.
2. You should also make sure that complete removal of the ceiling is required; it is possible that you will only need to partially remove it, make holes, or use ready-made holes for lamps.
3. It is necessary to know what materials the ceiling is made of in order to determine what tool should be used to remove it.
4. It is necessary to disassemble the ceiling correctly using suitable tools, the canvas must be removed carefully, without rushing.

A safe way to dismantle a tension covering (video)

In conclusion, we can say that you can remove the suspended ceiling yourself, the main thing is to do it carefully if you plan to install it again. It should be remembered that complete removal of the stretch ceiling is not necessary in all cases; for example, it is easy to drain water from the ceiling using the holes for the lamps. If you don’t rush and do everything correctly, you can disassemble the structure without calling specialists.