Relaxing by the pool is not only a pleasant pastime, but also the risk of serious injury, because anyone can trip or slip on the tiles. To prevent falls and injuries, the company Floor Systems» offers to buy anti-slip pool covers. They will take a rest in sports complex or at home pleasant and safe. The flooring presented in our catalog prevents accidental slipping, is pleasant to the touch, muffles noise and echoes, and relieves the spine when walking thanks to the springing effect.

Anti-slip coatings for swimming pools from the company "Floor Systems"

		German non-slip pool cover from the leading manufacturer EMCO “type 600”, which is supplied in rolls standard width 600, 800 and 1000 mm and 12 mm high. This product is available in 11 colors.
		EMCO "type 601" can be used both outdoors and indoors. These products are also made in Germany, but they have different characteristics. The height is 14.5 mm, the standard width is 600, 800 or 1000 mm, it is possible to produce up to 1200 mm. This model comes in 7 different colors.
		The next type is the “Esti” modular covering domestic production. Its height is 10 mm, the width can be any, and such paths are also suitable for street installation. Available in 4 colors.
		Modular flooring for the pool "Slim" (made in Russia) is also suitable for installation outdoors. Its width can be any, and its height is 9 mm. Available in 9 colors.

All anti-slip coatings and pool mats are made using a drainage system that ensures even distribution of water over their surface, thereby preventing its accumulation. In addition, they are hygienic, antibacterial, and resistant to salt water and chlorine. Therefore, it would be advisable to buy pool covers for such places as:

• showers;
• bathroom;
• bar counters;
• paths leading from the pools to the showers;
• steps in wet areas.

Pool flooring ordered from us can be made based on your wishes (individually selected size, color and type). As for the types, the products can be a path or a rug. For installation around the pool bowl convenient option are modular or roll products. The floor coverings for swimming pools presented in the catalog are from leading Russian and European manufacturers suitable for indoor use (baths, saunas, showers, indoor entertainment complexes), and for installation outdoors (for example, water parks). All pool covers are offered in a wide range of colors; individual selection of colors to suit any interior is also possible.

Take a dip in cool water during the summer heat, swim in the pool Probably everyone loves it in the winter, taking a break from daily hassle. Modern life dictates its own rules, and today many private houses are equipped with a swimming pool. But how choose pool covers home and public, taking into account the characteristics of the premises?

Choosing for pools

Flooring must meet certain requirements:

• easy to clean;
• look stylish;
• don't slip.

Currently, indoor and outdoor pools use anti-slip plastic coverings, fiberglass, rubber and other materials. There are many options, and every consumer can find one that will provide excellent security and also fit perfectly into the overall interior.

Features of anti-slip coatings for swimming pools

Such coatings designed taking into account their operation in conditions of high humidity. They are not afraid of aggressive environments, are not subject to deformation, and have an excellent appearance throughout the entire period of use. When choosing pool mat It is important to pay attention not only to color and size, but also to parameters such as safety and environmental friendliness.

The most popular option at the moment is anti-slip PVC coating. It is hygienic, durable and easy to care for. Bacteria do not spread on such a rug, which is important in public conditions. The structure of the material is designed in such a way that it does not allow moisture to linger, flowing into special drain channels through special gutters. High-quality anti-slip coatings can be purchased on the website http://ako-mat.ru/. The products presented in the catalog meet all the basic requirements stated for this category:

• wear resistance;
• aesthetic appearance;
• environmental Safety;
• injury safety;
• versatility of use;
• ease of care and many others.

Many pools have tiled floors, which increases the likelihood of injury. However, this problem is easy to avoid. All you have to do is buy and install anti-slip coating for outdoor and indoor pools.

The coatings have a drainage system, so they remain dry. The backing of the materials is designed in such a way that it provides excellent adhesion to the floor, and the surface is pleasant to the touch. Such mats can be laid in places that are as close to water as possible, as well as on paths.

Anti-slip coatings for swimming pools resistant to many chemicals, in particular to chlorine, which provides initial appearance product over a long service life.

Water is necessary for humans not only as one of mandatory elements body, but also to perform hygiene procedures. One of its most pleasant and useful properties is its ability to calm, bring a feeling of comfort and bliss.

It is unlikely that you will find a person who would not like to plunge into the cool and clear water on a hot summer day or swim in the pool in the winter cold, taking a break from everyday worries.

Realities modern life dictate their own rules and today almost every private house has its own swimming pool. It can be of any size and shape, have a variety of designs, but the flooring for the pool should be selected taking into account the high humidity in the room and have an anti-slip effect.

What should the floor be like?

How to choose the right material so that it is easy to clean, has minimal water absorption, but at the same time looks stylish and does not slip. There may be several options. One of the materials that has been used for quite a long time is ceramic tiles. It meets almost all the requirements, except for one thing - some of its samples slide.

In this case, you need an additional anti-slip coating laid on top of it. To avoid unnecessary waste, you can use modern materials, which were developed specifically for swimming pools and other similar places.

German indoor standard DIN 51097: Class A: dry areas (changing rooms). Class B: showers, areas around swimming pools. Class C: steps to the pool.

They are a modular coating with an anti-slip effect, which is very easy to install and does not absorb moisture at all.

Requirements for tiles and other materials

Floors in rooms with high humidity should have a water-repellent effect. Of all those presented on the modern construction market materials have such properties various types ceramic tiles And modular PVC or rubber coverings.

However, water absorption alone is not enough. After all, you always want swimming in the pool to bring only positive emotions, but this will not work if tiles without an anti-slip coating are laid on the floor. This factor must be taken into account when choosing a material. The modular flooring intended for the pool has good anti-slip properties.

Therefore, depending on the application floor ceramics needs to be addressed Special attention on these properties.

But is practicality the only thing that matters? Of course not. Pool in own home should fit into its overall style and certainly not look like a standard sports facility. Therefore, when choosing a flooring material, you need to take it into account color scheme, shape, size and other parameters responsible for aesthetic design and safe operation.

Overview of coating types

On the market you can find modular, anti-slip, PVC coating for pool floors, as well as double coating systems. Each of the materials is characterized individual characteristics, which allows them to be used in different conditions.

Modular coverings

The flooring for this type of pool consists of many elements of different sizes, which are connected using locks. The modular covering is not attached to floor surface, which simplifies installation. The elements of the canvas located around the pool bowl hold themselves together quite reliably.

Such a modular carpet will not only reliably protect against moisture, dirt and slipping, but will also emphasize a separate design solution.

This material is presented different options, which differ in shade. In addition, the modular coating has a special surface, which reduces the intensity of its contamination. Main advantages:

• strength;
• easy care;
• harmless composition.

And in addition, the modular covering has a textured surface, which makes it more attractive for a children's pool than, for example, open tiles.

One of the advantages of any rubber flooring is that the floor it hides, be it tiles or pouring surface, will remain intact when exposed to mechanical loads.

Materials with double fastening system

In this case, the flooring requires additional fastening to the floor using the method cold welding. This feature provides increased reliability of the coating and also does not allow moisture to penetrate under the material, as a moisture-proof barrier is created. The main disadvantage of a track with a double fastening system is the need to apply additional effort to fasten the material.

The covering with a double fastening system will need to be glued to the floor, making the floor completely waterproof.

PVC coatings

Polyvinyl chloride can easily withstand loads, is resistant to moisture, and is easy to clean. The rubber coating made of this material is equipped with drainage holes that allow water to flow directly to the drain. This eliminates the possibility of puddles, which means the level of safety will be higher and you can use PVC paths to arrange a children's pool.

Anti-slip coating

With its help, both the entire floor and individual strips are covered, which will provide a zone of safe movement around the facility. main feature material - surface relief, as well as the absence of the need for fastening to the floor, which is due to the presence of special fastenings on the reverse side.

Anti-slip coating is designed to prevent injuries on slippery floors in swimming pools, showers, and locker rooms.

The anti-slip coating for the pool is assembled into a sheet using locks that are simple in operating principle. This makes it easy to dismantle the deck around the pool for cleaning.

Roll coating

This material was created primarily for use on large areas. The strips are attached to each other with specially designed connectors. The material itself is characterized complex configuration: consists of many jumpers forming through holes different shapes, so that the floor around the pool always remains dry. If necessary, it is possible to cut strips to the desired length.

Due to its high performance characteristics, such rubber flooring is used not only for swimming pools, but also for sports fields, halls, etc.

Basic criteria for choosing the best coverage

The flooring for the pool is selected based on a number of parameters: external characteristics, the possibility of water outflow. But the most important thing is that it should be safe around the bowl (anti-slip surface of the path). This requirement mostly applies to children's pools, while in facilities intended for adults, there are also open tiles next to the bowl. However, regardless of the type finishing material(self-leveling floor, ceramic coating, etc.), there is always the possibility of putting rubber flooring on top.

If you are the happy owner of a mansion with a swimming pool, then, of course, you want it to be the best in every way, so take the choice of flooring very seriously. It must be of high quality and comply general style. Today, manufacturers offer PVC tiles even with a 3D effect, which will allow you to create any picture on the floor. But we should not forget about anti-slip properties, they are mandatory.

The most popular option is an anti-slip PVC coating. It is hygienic, durable and easy to care for.

PVC flooring for swimming pools is available not only in the form of tiles, but also in rolls; which option to choose depends on the area of ​​the room. If it is small, then it is more convenient to lay small fragments, while for large pools best choice there will be a second sample.

Compare tiles and PVC tiles

The pool must have a special floor covering; it can be made of ceramic tiles or PVC modules. Which one is better? It is quite difficult to answer this question. Each has its own characteristics.

Ceramic tiles are durable, reliable, have a wide range of colors, but also PVC materials are not inferior to it in their characteristics. That's why right choice can only be done taking into account the characteristics of your specific room and tastes, but still the majority give preference to modern floor coverings and they are right in their own way.

Review of manufacturers and products

1 sq. m of coating can cost from 380 to 3,900 rubles, which is influenced by the parameters of the material (dimensions, texture, pattern configuration), method of fastening and brand. One of the most popular manufacturers in this area is PlastFactor LLC. It produces products under the brands SENSOR, FACTOR, OPTIMA, etc. The assortment includes modular coatings different types, different in the type of lock, texture, pattern of the drainage system lintels, as well as in shade. average price material: from 1,500 to 2,000 rubles/sq. m.

FACTOR coating series AQUA: Thanks to its structure, it does not retain water and remains practically dry at any time. Drainage system ensures the absence of puddles and ventilation of the base.

Another manufacturer, Orion, offers a wider range, which includes both modular and roll material. The flooring for covering the pool in this case is in the same price category as the flooring discussed above. Additionally, the manufacturer also produces anti-slip tape.

Another brand, Muovihaka OY (Finland), offers Ultima series coatings, as well as components for them. This group includes both roll and modular materials. Their price is noticeably lower than both previously considered options.

For example, modular rubber cover can be purchased for RUB 1,200/sq. m, a roll flooring will cost less: from 600 to 1,100 rubles/sq.m. m. But in any case, when comparing tiles and rubber material, the second option will cost more.

Thus, if the floor in the pool, bathroom or sauna is tiled, it can be protected using PVC flooring of any type (modular, roll, special anti-slip materials). Each option has its advantages, for example, the modular canvas is easy to assemble and does not require additional fastening to the floor.

Rolled flooring will cover large area with a minimum number of connecting seams. The anti-slip coating is characterized by textured surface. All these materials are safer than open tiles. In addition, they can be used both on the entire floor surface and in individual areas.

Did you need to buy pool flooring to replace the old one or to improve the conditions for exercise and training? Then check out the catalog various options roll and modular coverings for swimming pools at prices that are sure to be affordable for you. The products presented in the SPORTS-TECH online store are extremely high quality and have all the necessary performance characteristics to ensure maximum comfort and convenience when exercising in the pool.

How to buy the products offered on the site?

Select the type of coverage you need and add it to your cart indicating the quantity. Please note that roll coverings are sold in rolls, while modular coverings are sold by the square meter. After selecting all the necessary products, you can receive Commercial offer from our company, or immediately purchase the product by completing a quick registration.

Pool flooring range

The following products are available:

• Modular. The unique design of this type of equipment allows you to assemble bypass paths of any configuration and color. The material – an elastic polymer – dries quickly due to its special cellular structure, does not retain water, is highly durable and wear-resistant. Perfect for a kindergarten pool due to its bright colors.
• Rolled. It has a structure similar to the previous type and is also made of elastic polymer. The difference lies in the delivery method (measured not square meters, but in rolls).
• For towers and springboards. Dense material has such qualities as a complete lack of slipping for reliable protection from injuries, high strength, resistance to wear and mold and mildew. FINA (International Swimming Federation) approved and suitable for professional training and competition. There are two types: 0.3 cm and 0.6 cm. The first is suitable for starting blocks, steps and springboards, and the second is for stairs, platforms and platforms.
• Pool mats. Also necessary equipment that can be placed directly by the pool, or, for example, in the showers. Rubber mats will protect against slipping on tiles due to their ribbed structure.
• Auxiliary equipment. We also have adhesive for gluing surfaces to diving boards and diving boards, and anti-slip pool tape to protect swimmers from injury on slippery floors.

Our prices for goods

In the SPORTS-TECH online store you can buy pool covers at both retail and wholesale prices. For small deliveries, retail is suitable, and if you need to equip kindergarten, sports palace or sports complex, then when ordering from 99,000 rubles. you will be given a 5 or 10% discount on the retail price based on the purchase volume.

We look forward to long-term cooperation and look forward to your feedback after your purchase!

- own production: Holding World of Cleanliness

Anti-slip flooring"Zig-Zag Twist" ensures the safety of people in premises with high humidity. The product has a relief surface with a cellular structure. The universal color scheme and laconic design allow this type of product to be used to solve various design problems.

Our company installed Zig-Zag Twist coating on such objects as: OJSC "UMMC", Youth Sports School "Yunost", "MetroFitness", "CityFitness" and etc.

Features of the anti-slip coating “Zig-Zag Twist”

Mid 2016 production company"World of Cleanliness" has begun production anti-slip coating stamps « Zig-Zag Twist”, developed using an innovative glue-free technique. The technology for manufacturing monolithic products without the use of glue makes it possible to achieve higher strength of products, compared with analogues made in China.

The coating adheres well to the surface and has springy properties, thanks to which it successfully copes with the following functions:

• prevents slipping;
• reduces the load on the spine and legs;
• absorbs falls and protects against injuries;
• cleans shoes from street dirt.

In addition to performing anti-slip functions, the coating protects the floor from mechanical damage, prevents premature wear of linoleum, laminate, tiles and other types decorative finishing. Its scope of application is any premises and open spaces with wet surfaces. The products are widely used as shower flooring , saunas, water parks, locker rooms, indoor and outdoor swimming pools. In everyday life, the product can be used for a bath, balcony or veranda . IN in public places- for the arrangement of any traumatic objects: steps, ramps, playgrounds.

How to buy roll covering?

The coating is supplied in rolls, is wear-resistant and has a pleasant design. When unfolded, it looks like a track maximum length 10 m. The product does not require special care. Cleaning of the product is carried out using water and ordinary detergents.

Zig-Zag Twist flooring is sold in linear metres, order size must be a multiple of 1.0 per roll.

At the World of Cleanliness company you can order anti-slip roll coatings of various modifications. Installation of tracks is done manually and does not require the use of tools. The product can be used indoors all year round, outdoors- according to the recommended temperature conditions.

To buy a coating for slippery surfaces, leave a request on the website or contact our manager by phone.