Every year, millions of people spend huge amounts of money to visit exotic places on the planet. Recreate natural beauty in miniature, you can make a decorative indoor fountain with your own hands. The lively murmur of water has a beneficial effect on emotional condition person. Moreover, it is impossible to take your eyes off her.

The design not only gives the room a luxurious look, but also humidifies the air during the hot season. To create a decorative indoor fountain with your own hands, it is not necessary to purchase expensive installations. The main thing is to be patient, use your imagination, pick up the tools and create miracles. First, let's look inside the structure to understand how it works. Then we will get acquainted with the types of indoor fountains. And finally, let's look at step-by-step instructions for creating a natural miniature for your home.

The fountain is not only a decorative element. Since it wonderfully humidifies the air, it should not be installed near wooden furniture.

Why does water flow

“All rivers flow into the sea, but it does not overflow.” That's what it says in the ancient book humanity. We see confirmation of these words every day when snow or rain falls from the sky to the ground. The Great Designer launched the water cycle in nature. Imitating him experienced craftsmen created with your own hands a decorative indoor fountain that pleases the heart all year round. How does this system work?

The design is based on a unique water cycle in a closed system. Launch it using connected to electrical supply. It lifts the liquid upward, after which it flows gracefully into the collection bowl.

There are decorative fountains that use several identical containers. They are lined up on different heights, connecting with tubes. By pouring liquid into the vessel located at the top, the system starts. Regular physics plus creativity and golden hands. The result is an exotic corner with the quiet murmur of water that calms the nerves.

How to create a decorative indoor fountain with your own hands: step-by-step instructions

Before you get started, you need to think about the size and location where the structure will be installed. For example, in small room It is inappropriate to place a huge fountain. And, conversely, in spacious room a miniature structure may go unnoticed. The decorative fountain is installed on the floor, wall or table. Much depends on the overall design of the room and the number of household members.

Depending on the movement of water, fountains are:

1. Cascade - liquid falls along decorative steps or ledges.
2. Closed - water moves in flasks or flat containers attached to the wall.
3. Fountaining - the stream is directed upward, after which it falls into a miniature pool.

There are backlit options in the form of wall paintings that create a unique atmosphere in the room.

When choosing a location for the structure, you should take small children and pets into account. The main thing is that the structure does not disturb anyone.

But how to make a fountain at home with your own hands to fill it with exquisite exoticism.

Of course, you first need to understand how the structure works, and then collect the necessary items:

• suitable container;
• aquarium pump;
• flexible hose;
• waterproof glue;
• decorative elements (expanded clay, various sizes shells, colored soil, wood, ceramics);
• backlight (optional).

A vessel of any shape is suitable as a main bowl. The main thing is that water does not leak out of it. Upper part The pump for a small fountain is equipped with a sprinkler. Since the dimensions of the structure are very small, there is no need to put on the tip. Otherwise, water will flood the surrounding area of ​​the room.

It is quite possible to construct a miniature pump yourself, since the unit has a relatively low power.

Let's start the creative process

Those “who despise the day of humble beginnings” never achieve success. Therefore, having collected necessary tools and materials for construction, wise guys get down to business.

Let's consider a traditional master class on creating an indoor fountain with your own hands at home:

1. A piece of about 10 cm is cut from a suitable hose (can be an aquarium hose). Its diameter should coincide with the tip of the pump.
2. A pump is attached to the bottom of the tank using suction cups and connected to the tube.
3. The resulting space is filled with expanded clay or stones, placing a tube between them.
4. To give the fountain a presentable appearance, all elements of the device are carefully masked using all kinds of shells, pebbles or glass.
5. Depending on the preferences and interior of the room, the design of the structure is carried out using various objects.

Stylish exoticism in the interior of the bedroom

A small tabletop fountain can be made from a flower pot with a diameter of approximately 25 cm.

To work you will need:

• durable container;
• pump;
• translucent balls or pebbles;
• aquarium plants;
• paints for painting on ceramics or glass.

Used for the base of the fountain. To give the design stylish look, the container is painted with special waterproof paints. To circulate the liquid, install a pump, make a hole and bring the tube up.

The bottom of the fountain is decorated with decorative balls, shells or pebbles. After filling the system with water, aquarium plants are placed inside. They give the design an exotic look and uniqueness. Simple scheme creating a design opens up wide opportunities for beginning craftsmen.

A stream gurgles in a fountain and without a pump

Perhaps only a few have seen natural geysers in all their glory. As you know, there are no pumps there and no electricity. But such a release of water causes unprecedented admiration. Of course, it is impossible to create such a phenomenon at home without electricity. However, there is a way out!

To build a miniature fountain without a pump, use:

• several containers;
• thin tubes;
• connecting adapters;
• sealant (if containers are made of plastic);
• decorative elements.

First of all, drill a small hole at the bottom of each bowl. Thin tubes are pulled through them, and then sealed cold welding. The procedure will protect the system from fluid loss.

A cool, babbling fountain on a hot summer day is very invigorating and improves your mood. If you don’t have the time or opportunity to get out to a real fountain, then a small home fountain is just a salvation! Moreover, make a fountain for your home with your own hands very simple. My Master Class.

For a home fountain we will need:

• flower pot (without holes in the bottom) with a tray;
• small water pump (pump for pumping water, powered by mains, sold in construction stores or markets, cost 300-600 rubles, mine is 6x4.5 cm in size and 5 cm in height);
• acrylic paints,
• paints for glass and ceramics,
• contours,
• spray paint;
• pebbles for an aquarium;
• plastic plants for aquarium;
• decorative castle, again, for an aquarium.

1. Flower pot will serve as a cup for our fountain self made . To make it look beautiful, it needs to be embellished, that is, painted.

2. I chose “ mosaic" To do this, I applied random line cells on the outside of the flower pot using a golden outline.

3. Then I filled the cells with acrylic paints, as well as paints for glass and ceramics (I used everything that was at hand and that did not require firing to dry).

4. I painted the inside of the container and tray with blue spray paint. You need to be careful here. It is better to wrap the pot with some kind of rag so that small splashes of paint do not end up on outside pot and did not spoil the drawing.

As an option: you can paint the pot and plate first with spray paint, and then start painting the outside.

5. So, the main job is done! Here's how the pan will be installed.

6. Under the tray there will be a pump for the fountain. In order for water to circulate, small holes must be made in the bottom. holes for drain. In addition, the hose from the water pump will also need to be threaded through the hole in the pan. Since our base is plastic, it is easy to melt the holes with a hot nail (heated, for example, on a stove).

7. Now the details. I lightly painted our water castle with glass and ceramic paints, and covered the circumference of the fountain with colored aquarium pebbles. Of course, you can come up with a different decor for your handmade fountain!

8. When everything is ready, you can collect the fountain. I passed the water supply tube through the window of the ceramic lock and filled the bottom with pebbles for the aquarium.

I slightly enlivened the “landscape” with branches of artificial algae.

And now he is already quietly murmuring, small, but so cute handmade indoor fountain! :)

You can find the original of this master class on its author's website

Master class tabletop waterfall, DIY decorative fountain

Author: aquamagic

Reducing indoor air humidity is a side effect of heating an apartment in winter period. Moreover, excessively dry air not only causes discomfort when breathing, but also causes an increase in the number of colds. The dry mucous membrane of the nasopharynx becomes more susceptible to all kinds of infections and viruses. That is why during heating season You should consider humidifying the air.
On sale you can find many different devices for air humidification: evaporator, steam generator, humidifier, etc. Some owners simply place an open bowl of water in the room. As you can see, there are many options, but none of them are suitable for creative people, since our imagination simply cannot accept this simple solution. After all, there is an opportunity to do something very useful and most importantly beautiful thing, with your own hands. So, after thinking a little, we found a way out by offering you, dear readers, make an indoor fountain. You can install this beauty in any convenient location: on the floor, on the table, on a stand. A decorative fountain will be an excellent interior decoration and will fit perfectly into any style decision. Moreover, the murmuring water of an indoor waterfall creates a peaceful environment conducive to rest and relaxation.
Master class tabletop waterfall. DIY tabletop fountain.
To make a tabletop waterfall-fountain craft, we first of all need a mini pump for (water circulation in the fountain) lifting water from the lower reservoir to the upper reservoir. It is best to use a pump water pump, which you can simply put in the lower reservoir (pond) and pump water up. Unfortunately, we do not have such pumps for sale, therefore, in this master class, we use a water pump from household appliances, or rather from an electric samovar (photo below).

We make the reservoir of the lower reservoir from a plastic oil bottle (5 l). Cut off the lower part with a height of 5-8 cm.

A round cake tray with a diameter of 29-30 cm is used as a base. You can use any shallow plastic container.
Connection of the pump to the lower reservoir. Using a hot soldering iron, make a hole in the bottom reservoir. The hole should be 0.5mm smaller than the diameter of the pump tube. This is necessary to ensure that the connection to the pump is tight, which will avoid leakage. If you cannot tightly connect the pump to the reservoir, you can proceed as follows: put a piece of soft hose on the pump tube and thread it into the prepared hole, which will seal the connection (see photo below).

At this step you can check the operation of our fountain. Also check if there is a leak somewhere.
The above steps are only necessary if you do not have a pump pump.
Relief production. To make the relief we will use construction foam. Cover the entire base with foam to a height of 5-6cm. Wait for the first layer to harden. This will take approximately 3-4 hours and start building up the slide (base of the waterfall) (see photo below). We gradually increase the base of the waterfall by 15-17cm.

After the foam has completely hardened (after 10-12 hours), we begin creating a waterfall. We cover the bed of the waterfall with pebbles and place a small lake on top. After completing the formation of the waterfall, coat the bed well and, especially carefully, the seams between the stones waterproof glue liquid nails (see photo above).

After the glue has dried, we check the operation of our tabletop fountain - waterfall. It will not be possible to get a beautiful drop of water right away, therefore, using a gun (hot glue), we form 3-4 nests in which streams of water will form and fall down, see photo above.
Next, we proceed to decorating the waterfall and painting our tabletop fountain. Why will we prepare a special paint?

Pour PVA construction adhesive diluted 1:1 with water into a container, add color and sand. Stir and add sand until it reaches a creamy consistency. Let's prepare several shades of green and paint our craft, applying each layer after the previous one has dried.

The result of painting a decorative fountain is shown in the photo above.
Let's start making the base (pallet) for our tabletop waterfall - fountain craft.

From thick sheet cardboard we cut out a circle with a diameter of 30 cm, and another circle with internal diameter 30cm and outer diameter 32cm, strips 5 and 1.5 centimeters wide. Glue all the parts as shown in the photos above.

We install our waterfall on the base and proceed to the final stage.
Between working on a tabletop waterfall, I assembled a tree from sequins on a stone, photo below

We glue the tree into a previously prepared place and complete the work on the tabletop fountain - waterfall, covering all the flaws and minor shortcomings.

So I'm ready original craft. Looking at her, you would never think that you can create such beauty with your own hands and use available materials for this. This indoor fountain will make everyone happy. What's not an idea for a great gift?!

It would seem that when we offered you to make a fountain for your home, we were thinking about humidifying the air in the room, but in the end we not only solved this problem, but also brought a touch of originality and sophistication to your home.

Material taken from ourworldgame.ru

Fountains are not only cool on a sunny day. This and positive energy, spreading throughout the house from the sounds of rushing water.

Many people want to surround themselves artificial reservoirs or at least small fountains to relax and unwind near them after work. You can do all this yourself: just find out how to do it homemade fountain with your own hands and build it, and quite quickly and efficiently. And just such a fountain, created with your own hands, will become an exclusive decoration of your site and home!

Types of fountains

All fountains can be divided into fountains intended for indoors or outdoors. The first type includes indoor fountains. They are used rather for the purpose of decorating the interior of the house and can be different in shape and size, depending on the parameters of the room.

Outdoor fountains are designed to decorate a personal plot. They are placed on the site in front of the house or in the garden. They can be made of plastic, natural stone, marble, porcelain.

In addition, such a fountain can be equipped with lighting, and then you can admire it not only during the day, but also in the evening and at night. A festive atmosphere is guaranteed with such a fountain!

Country fountain

Many people ask themselves the question - how to make a fountain in the country? Before you start arranging this hydraulic structure, you need to decide on the desired model. His appearance directly depends on general style plot. So, if the dacha in rustic style a fountain in the shape of a mill is perfect, and for an area in classic style It is better to build a fountain with a minimum of decor or in the form of a statue.

If your dacha resembles a picturesque corner of nature, you can make a small fountain, reminiscent of a geyser, gushing directly from under a stone. You can also place the fountain near an artificial pond surrounded by boulders.

Many lovers of country life are tormented by the question of how to make a simple fountain on their site. To do this, the fountain pool is buried in the ground, and a special recess is made at the base for all the equipment and the pump.

The main advantages of such a fountain are its elegant design, shallow depth and convenient built-in overflow-drain system. However, there are also disadvantages - high costs when installing the pool itself, cables and fittings. If you decide to make a fountain at home and settle on this particular type, arrange it so that each element pleases the eye and creates a feeling of harmony and peace.

Tools and materials for arranging a fountain

Before you begin installing the fountain, you need to acquire materials: a beautiful fountain is unlikely to come out of nothing. The choice of materials for the fountain depends on the place from which its arrangement begins. It is better to use a small pond to build a fountain. summer cottage, and then before making a home fountain, you will not need to think about water drainage. If you already have a reservoir, then for work you will need:

• storage tank;
• set of nozzles;
• the fountain itself;
• pump.

The most crucial moment is the choice of pump. The modern market offers electromagnetic, centrifugal and vortex pumps. For country fountains it is recommended to use centrifugal pumps, since they are more powerful, but at the same time quite economical. If there is no reservoir on the site, you need to dig a pit and equip it with artificial pond, equipping it with a special film and concrete block on which the pump will be placed.

Stages of fountain construction

Organization country fountain needs careful planning. In order to understand how to make a fountain with your own hands, you need to correctly calculate the location of the future structure, its proximity to power sources and water supply.

Water from the fountain can be drained down the drain into the sewer, or it can be recycled - reused, which significantly saves the process. When preparing sewer channels for draining water from the fountain, a rainwater inlet may be used.

If there is a ready-made bowl for the fountain, a pit is dug for it. Otherwise, they also dig recesses and equip it like a small pool: drainage in the form of sand, strengthening the walls, waterproofing layer, sewer connection.

The construction of the fountain itself begins with the installation of a pump. It is important to remember that there is an underwater and above-water position for fountain pumps, with the above-water pump being more often used for larger fountains as it produces a higher, stronger jet. It is also necessary to ensure that the electrical wiring is well insulated. The fountain itself is usually installed in the center of the pond so that water does not spill beyond its boundaries.

Fountain decoration

The uniqueness of a homemade fountain can be emphasized by decorating it. How to make a fountain at home so that it becomes a decoration of the yard both day and night? This is possible thanks to the effect of artificial illumination of the fountain using special lighting equipment. Lamps that illuminate the fountain around the perimeter and even in the water will help create a fabulous harmony of water and light.

You can also plant bushes or flowers around the fountain, and the bottom of the reservoir itself can be landscaped using various aquatic plants. The fountain can be decorated with wood, stone or statues.

When equipping a fountain, you can use ready-made statues and figures. But it depends on you how much a standard fountain will become exclusive.

Indoor fountain

Any apartment interior can be enlivened with the help of a small fountain. Before starting work, it is better to figure out how to make an indoor fountain with your own hands and think through all the nuances. To implement this idea you will need the following materials:

• container on which the fountain will be located;
• aquarium pump;
• a small piece of hose for cleaning the aquarium;
• glue;
• large sink;
• colored decorative soil, shells and expanded clay.

First you need to find a container in which the fountain will be located. For this purpose, you can use any vessel you like, for example, a flower pot. You can also choose a beautiful flower pot or basin for a fountain, the main thing is that the water does not leak out.

In addition, you need a pump with a sprinkler and without a tip, since the container for the fountain will be small. the main task The purpose of the pump is to raise the stream of water.

Stages of construction of a decorative fountain:

1. Cut a small piece of about ten centimeters from the aquarium hose. You need to immediately put it on the pump tip and make sure that all the holes in it are open at full strength, since the power of the jet depends on this. Then you should strengthen the pump at the bottom of the selected container.
2. We fill the pump with expanded clay and level its surface.
3. Cover the expanded clay with plastic wrap with a hole for the hose.
4. Sprinkle decorative primer onto the surface of the film.
5. If you need a stand for a sink made of stones, then it should be glued to the sink with epoxy waterproof glue.
6. Install the stand by first inserting the hose into it.
7. Through drilled hole We put a sink on the end of the hose and stretch the hose into it one centimeter.
8. Decorate the surface of the fountain with beautiful shells or stones. And the sink from which water flows can be replaced with something else, as long as there is a hole for the hose. The design and style of an indoor fountain depends entirely on the imagination of the craftsman who makes it.

Decorative mini fountain

A cool fountain on a hot summer day improves your mood and invigorates. In such a situation, even a small fountain will be a lifesaver for you. How to make a mini fountain? This is quite easy, you just need to stock up on the following materials:

• flower pot with tray;
• small water pump;
• paints for ceramics and glass;
• contours;
• decorative plants for the aquarium;
• artificial translucent balls or stones.

Stages of work:

1. The flower pot will serve as the basis for the fountain. If desired, you can decorate it with unusual painting. To do this, use special paints for ceramics and glass.
2. Then install the pump under the pan to circulate water, you need to do it in the bottom small hole for drain.
3. Pass the pump tube through the hole and fill the bottom with decorative stones.
4. Assemble the entire structure and fill it with water. Decorative aquarium plants will help revive the landscape.

Thanks to this scheme, anyone can make a mini fountain with their own hands, using their fantasy and imagination.

Fountain lighting

One way to make even an ordinary fountain magical is to use lighting. It could be:

• surface lighting in the form of lanterns along the perimeter of the fountain;
• underwater lighting using waterproof lamps;
• floating backlight on built-in autonomous batteries.

With underwater lighting, the effect of water glow is created; if the lighting is rotating, then the whole process turns into a water-light extravaganza. A rotation mechanism is used for this.

An important stage of lighting equipment is laying the wiring in a water-repellent busbar. For safety, it is equipped with an automatic breaker (in case of current leakage). To comply with safety precautions, when installing fountain lighting, lamps with a voltage of 12 Volts are used. These are primarily halogen lamps, and lamps based on fiber optics and LEDs. Connect the lamps to the network or transformer.

If you want to illuminate the water surface, place the lamps around the perimeter above the water. If you want to emphasize some element of the composition, use a directional beam of light, if the entire composition is a spotlight. Using Spotlights, you will be able to focus attention on one detail, for example, a group of plants in a pond.

Fountains have always decorated any interior. Today they are widely used for the purpose of decorating premises and improving personal plots. Therefore they are widely used in landscape design. A fountain on the lawn, near a gazebo, near an artificial reservoir surrounded by rock gardens - there are many options for the location of fountains. They can occupy any free space or become a central place in the design. garden plot. By giving free rein to your creativity, you can figure out how to make the fountain not only beautiful, but also unusual.

In specialized stores today you can buy very original ones. The range of such goods is quite large, as they say, for every taste and color. Many people like it when they can hear the sound of a small trickle of water in their home. These sounds allow you to relax and calm down after a hard day at work. However, most consumers have no idea what can be done. special costs It does not require, nor does it require knowledge.

Material for construction

So, below we will describe how to make a fountain at home. For creating original design you will need:

1. Glue.
2. A container that will serve as the base for the fountain.
3. Approximate diagram of the fountain
4. Large sink.
5. A small piece of hose commonly used for cleaning aquariums.
6. Polyethylene film.
7. Expanded clay, decorative multi-colored soil and shells various forms and sizes.

A large sink will serve as the central detail of the entire composition. A pump and hose are needed to pump water, and multi-colored soil, shells and expanded clay are needed for decoration. In addition, you need a small piece polyethylene film. So, expanded clay can be purchased at any flower shop. As for black, red soil, it is better to use a special mixture for aquariums.

Selecting a container

A home fountain should be durable enough and at the same time beautiful. Therefore, the container for its base should be selected more carefully. The first step in making a structure is selecting a vessel. In this case, you can take a flower pot for a fountain. If there is no such container, then you can use a flower pot, a beautiful basin, a clay vase, etc.

The most important thing is that the vessel does not leak. If, for example, in flower pot If there are holes, they should be sealed with epoxy glue.

Choosing a pump

Since anyone can make a fountain at home, it’s worth Special attention pay attention to the pump. After all, not everyone understands them. There are several with a sprinkler on the tip and a regular one. In this case, the first option is not suitable. First of all, splashes can get outside the main container. And one more thing - we have a completely different idea.

Therefore, to make a mini fountain with your own hands, a regular pump will be enough. You can make the tip yourself. In this case, the pump should simply raise the stream upward.

First stage

So, how to make a fountain at home without much expense? First, you should cut off a small piece of hose, about 10 centimeters long. After this, you need to put it on the tip of the pump and see if the hole in it is completely open. The power of the jet that will be supplied to the fountain depends on this. Ready design should be installed at the bottom of a previously prepared container.

The home fountain in this case will have a large sink in the center. It is from this that the water will flow. Therefore, it is necessary to make a hole in the sink that will be sized to fit the hose. This can be done using conventional drill. Of course, you should drill the sink carefully so that its walls do not crack.

Stage two

The fountain layout is quite simple. With its help, everyone can assemble a similar decoration for their interior. When the pump is installed in the container, you can fill in expanded clay, which must be covered with polyethylene on top. A hole for the hose should be made in advance in the film.

Polyethylene is necessary so that expanded clay does not float when wet. After all, water will be poured into the container. After this, multi-colored aquarium soil should be poured onto the film.

Sink stand

The composition will not look good if the main element is simply installed on pebbles. Therefore, you should make a neat stand. So, how to make a fountain at home that will not only soothe with the pleasant sounds of flowing water, but also be a wonderful addition and highlight of the interior? A beautiful stand can be created from pebbles. They can be attached using epoxy glue. When making a stand, do not forget about the hole for the hose.

Assembling the structure

When the stand is ready, a hose should be passed through it. If it is too long, then it needs to be shortened. Otherwise, it will be visible where the water is coming from. Now you can install the main element - a large sink. The hose should be pulled only one centimeter into the pre-made hole.

That's all, all that remains is to decorate the fountain. To do this, you should sprinkle some shells around the sink and put the most beautiful pebbles. All this can be purchased in the store - for lovers of aquarium fish or as a gift.

If there is no large sink, then it can also be replaced with any suitable item. The main thing is that you can make a hole in it for the hose. The design of a decorative fountain for a room depends entirely on the imagination of its creator.

The final stage

After the composition is completely folded and all its elements are secured, water must be poured into the container. There is no point in completely submerging the soil. This way the fountain will lose its main idea and its charm. The most important thing is that the pump is completely hidden under water.

Now you can turn on the fountain. To do this, you need to plug the cable from the pump into the outlet.

That's all, the homemade fountain for the room is ready. However, it is worth remembering that the water from it will gradually evaporate, especially in the hot season. Therefore, it will be necessary to add liquid to the decorative fountain at least once a week. If necessary, it can be done more often.

You can disguise the cable from the pump going to the outlet. In addition, an indoor fountain can be decorated artificial flowers. This will give the composition a more impressive look.

Finally

Now you know how to make a home fountain. To create it you do not need large expenses and special talents. It is enough to turn on your imagination. It doesn’t take much time to make such compositions, but they will delight you for many years.

For those who want to update the exterior, make it special and memorable, we suggest using a small homemade fountain. The step-by-step instructions for making a fountain with your own hands are quite simple and anyone who has a certain set of tools and materials will be able to create this beauty in their yard.

Installing a fountain at the dacha

The first point of the fountain installation plan is planning its size and type. Consider the size of the yard; do not make the fountain too large or small - this will not give a positive effect. visual effect. Remember, the power of pumping equipment is directly proportional to the size of the structure.

Now you should select correct area land for installation. Firstly, the fountain should be located where it can be clearly seen. Secondly, it should be close to the vacation spot. The sound of running water and cool freshness in summer heat- important components of a pleasant and peaceful holiday on fresh air. Try not to install the fountain in direct sunlight. The water will have to be changed frequently due to blooming. There is also no place for structures near trees; the roots can damage the thicket and for repairs you will have to dismantle the entire decorative element.

To install a fountain with your own hands on the site correctly, do not choose places near the walls. In this case, the structure will not avoid exposure to mold and mildew. And this, in turn, will not only spoil the appearance, but also cause an unpleasant musty smell.

Plan future buildings on the site in advance. You should not install a fountain on the road to them.

Step-by-step guide for installing a fountain in your country house with your own hands

Let's talk about how to make a fountain with your own hands using the example of a very simple design - fountain-fontanel. A structure of this type has a number of advantages:

• Spectacular appearance;
• Easy care;
• Easy access to parts for repair purposes;
• Possibility of dismantling for winter.

Having selected a place for installation, we dig foundation pit slightly larger than a fountain bowl. Additionally, a shallow hole should be dug around it. gutter(about 10 cm).

DIY fountain. Instructions in photo

At the bottom of the pit there should be sand cushion 15 cm thick. This will protect the underground part of the structure from plant roots. Level the surface and install it on it plastic bowl. We level the font, pour in and compact sand. The container should be installed in such a way that its edges protrude by 5-8 cm.

The next stage is filling plastic container under a bowl of water. There is no need to pour “heaping”; leave 4-6 cm to the edge.

Now it is necessary install a fountain and check the operation of pumping equipment. If power pumps can be adjusted, then we adjust it so that the water falls back into the bowl. The choice of equipment should be approached very carefully. Ideally, when purchasing, explain to the seller what bowl size and bowl volume is expected. Then he will help you choose equipment of the required power.

DIY fountain. Instructions in photo

After installing the bowl and pump, you need to do waterproofing fabric. We cut out a canvas with a diameter the size of a fountain pit. Starting from its center, cut strips. This must be done so that the diameter of the resulting inner circle is equal to the diameter of the bowl of the structure. We bend the resulting strips of material and lower them into the container. They can be secured using sealant. Do-it-yourself fountains always require a lot of patience and accuracy in work, especially this stage of construction.

To ensure that the base of the structure does not lose its shape and is stable, we place a couple of rods on a sealed fabric fittings, and on top of them - galvanized fine mesh. The mesh size will influence the size of stones or crushed stones used used in the decor of the fountain.

DIY fountain. Instructions in photo

The final stage of construction - decoration designs. The border of the fountain can be laid out with larger stones, but you should not make it too clear. Small stones such as sea pebbles or crushed stone are laid out on the mesh. If it is necessary to add naturalness to the fountain, then its boundaries should not be too clear. Various plants will look good along the edges of the structure.
Thematic japanese fountainfor lovers of oriental exoticism it is installed in a similar way. Step-by-step instructions for making a fountain with your own hands for the garden in Japanese style consists of the same points. You will find a diagram of the structure below.

DIY waterfall fountain

We will not build anything grandiose, but small, about 1 m high, cascading waterfall We are quite capable. It has already been described in detail above how to prepare a pit for a pond bowl. But this time we are building a waterfall. And if there is no natural elevation for him, he will have to create it himself.

Do embankment convenient in the process of digging a pit. We simply throw the earth where the slide should be and carefully compact it. For the hose supplying water to the point where the water falls, make a small groove There are holes and embankments in the wall.

DIY waterfall fountain. Instructions in photo

After the foundation pit and embankment for the waterfall are ready, we begin to cover the bottom and walls of the mini-pond waterproofing material (for example, PVC film). The fabric must be laid in such a way that it not only completely covers the bottom and walls of the pit, but also protrudes about half a meter on the sides of the pit.

Be sure to lay a pipe for supplying water to the top of the waterfall in a previously prepared channel-ditch. Bend one edge 30-40 cm up.

This time we are making a permanent structure, and therefore it is best concrete a bowl of a pond. To begin, carefully lay out metal mesh at the bottom of the pit. The waterproofing must not be allowed to become damaged. Next, pour a layer of concrete about 12-15 cm thick.

How to make a fountain at your dacha with your own hands. Photo

Now you need to prepare bowl walls. We lay out the mesh, strengthening it in the solution that has not yet hardened. You can continue installing a fountain with a pump with your own hands, which will look like a cascading waterfall, within a day. We fill the walls of the pond bowl and finish the most difficult stage of construction.

The next part of the construction is decoration the resulting structure. We build steps on a pre-compacted slide. The step should be about 30 cm and three ledges will be enough.

On the resulting flat surfaces we post it flat sandstone, pebbles or any other material to your taste. We decorate the rest of the fountain, including the film around the perimeter, with stones, crushed stone, marble or other pre-prepared materials.

All that remains is to turn on the pump and fill the font of the structure with water. We watch the stream flow steadily down the steps of the waterfall and enjoy the originality of our suburban area.

DIY stone fountain

How to build stone fountain? We'll talk about this right now. First you need to make sure you have everyone necessary devices and materials. We will need:

• Water pump (underwater with medium power is suitable);
• Plastic container for the bowl;
• A metal or PVC tube for carrying an electrical cable;
• coupling;
• Flat stones and gravel;
• Wooden bars;
• Water flow power regulator;
• Copper tube with a diameter of 15 mm.

Pit for the fountain bowl there should be a slightly larger container prepared for these purposes. By filling the space between it and the walls of the pit with soil, we will significantly strengthen the position of the bowl. As in previous cases, do not forget to create a pit at the bottom sand cushion . On top you need to lay a layer of pebbles.

Water pump fits freely in the water tank. This will make it easier to repair it if the need arises. You can protect your water tank from debris by simply fine mesh. To give strength to the structure on top metal mesh are placed wooden blocks (if desired, they can be replaced with metal fittings).

The base of the fountain will be metal pipe, which is attached vertically to the pump.

The next stage is preparation flat stones. To do this, using special tools, we make holes with a diameter slightly larger than the diameter metal pipe- foundations of the structure.

Next, using the principle of a children’s pyramid, we “place” the stones on the pipe. All that remains is to add decorative elements to the fountain and connect the pump. A very simple, but effective and beautiful fountain at the dacha with your own hands is ready for use.

A variety of do-it-yourself fountains in personal plots

Submersible fountains

If there is already a pond in the yard, then it can be used as a basis submersible fountain. The principle of its operation is simple. Water is supplied via a pump directly from the pond. In this case, to install a submersible fountain you will need:

• Pump;
• Water supply pipe;
• An appropriate nozzle for forming a water jet and giving it the correct direction.

The attachments come in a variety of different types. Eg, bell attachment is a two-disk design. The flow of water passes between them and changes when the gap is adjusted. Nozzle " geyser"—a tube narrowed toward the top—quite effectively copies the corresponding natural phenomenon.

Such structures have quite a lot of possibilities. For example, you can create the effect of a key gushing out of the ground. To do this, install the fountain yourself so that the end of the pipe does not protrude above the surface of the reservoir.

Using more complex attachments, you can significantly expand your decor options. The effect of spraying water, the simultaneous combination of several nozzles and many other variations for the choice of those who construct a fountain in their dacha.

Stationary fountains

A fountain of this type is a real find for amateurs and professionals of design art. Structures can take the form of natural stone fonts, antique structures; they are made from clay pots, plastic bottles and any material that is at hand. Particularly popular in Lately fountains for Japanese gardens.

Any frost-resistant material will do: marble, fake diamond, sea pebbles and more. To decorate such fountains, they often resort to painting. There are two ways to do it:

• Coloring the material before manufacturing the structure;
• Painting the finished figure.

The first option costs much more, but it is also much more reliable. To protect against moss, fungus and mold, it is useful to treat the fountain structure with special products.

Small stationary fountain It will look good in family recreation areas or near children's playgrounds. Our master class “Do-it-yourself fountain in the country” will help novice designers correctly build, perhaps, one of the main decorative elements in the garden. suburban area. And it doesn’t matter whether it’s a small geyser fountain or a large cascading waterfall 2 meters high. The main thing is that it pleases the owners and does not cause problems.

Video instructions for making a fountain at the dacha