Upholstery is one of the most important stages in the production process of upholstered furniture. And if earlier upholstery work was carried out with the help of a hammer and small nails, today they have been replaced by special furniture staplers. They significantly speed up the speed of manipulations. In this article we will talk in detail about the types and features of this tool, as well as how to assemble a stapler and how to use it correctly.

Staplers: history of invention and the basic principle of operation of the device

The word stapler comes from English. Its inventor is considered to be George McGill. It was he who, in 1867, received a patent for a device with which it was possible to easily fasten several sheets of paper. Nevertheless, such devices were developed back in the 18th century in France, under King Louis XV.

The principle of operation of the stapler is extremely simple. Pressing a lever or button causes compression of the spring located inside the mechanism. As it unclenches, the impact mechanism hits the bracket with sufficient force, knocking it out of the holder. The staple with its sharp edges pierces paper (fabric, leather or other material).

All staplers are divided into two main groups:

• stationery;
• construction (including furniture).

The first ones are designed for stitching together several sheets of paper or cardboard. They are equipped with a special metal plate, which bends the edges of the staples inward upon impact. Construction staplers are used to secure material to the main surface.

Types of furniture staplers

Until recently, a small hammer and special nails (with a large head and a short leg) were used to upholster upholstered furniture. Fortunately for tapitzers (as furniture upholsterers are called), completely new tools have come to this field of activity. A special stapler for furniture allows you to do the job much faster and more efficiently.

According to the nature of energy use for their work, all staplers are divided into three categories:

• mechanical;
• electrical;
• pneumatic.

The mechanical manual stapler is a lightweight, compact and easy-to-use tool. The spring in it is compressed mechanically by pressing a special protruding lever. It has one drawback, and a rather significant one: low power and low performance. It is difficult to handle a large scope of work with such a stapler.

Operates using an electric drive. To hammer in the staple, you just need to press a button. Typically, such a tool fires up to 20 shots per minute. The productivity of working with such a stapler increases significantly. On the other hand, it is tied to the power grid, and this is its main drawback. Moreover, the presence of a cord significantly reduces the maneuverability of the tapitzer.

Drive staples into the material using force compressed air. They are powerful, highly productive, but too bulky and heavy. They are used only in stationary enterprises and factories.

So, how to assemble a stapler for furniture production, how to use it, and what staples should you choose for it? All this will be discussed further in our article.

Manual stapler: instructions for use

The main characteristic of any stapler is the force of its impact. To determine it, just carefully study the instructions that come with the device. It should also indicate the recommended staple length. It is quite obvious that the greater the length of the bracket used, the higher the impact force of the mechanism should be.

A stapler for furniture is a simple device. Understanding the principle of its operation will not be difficult. Nevertheless, it would be useful to familiarize yourself with the basic rules for its safe operation:

1. Before starting work, the stapler should be loaded with a staple cassette. Charging system and methods may vary slightly depending on type and model specific instrument.
2. While working, you should be extremely careful: you should not place your fingers or other parts of your body under the stapler’s firing zone.
3. In the case of an electric stapler, it is important to follow basic safety rules for working with electrical equipment. It is necessary to carefully monitor the power cord and unplug the device during breaks.
4. It is important to constantly recharge the battery of an electric stapler in order to ensure uninterrupted operation of the device.
5. It is necessary to remove incorrectly driven staples from the material using special pliers.

So, we have already figured out how to use a stapler. Now it’s worth talking about the features of choosing this tool. It has its own rules and its own nuances.

Choosing furniture stapler, it should be clearly defined for what purposes and on what scale it will be used. If we're talking about If you want to reupholster one sofa at home, then it’s enough to choose an inexpensive mechanical model. If the device will be used regularly (for example, in a furniture workshop), then it is worth buying an electric or pneumatic stapler.

When choosing a tool, pay attention to how it fits in your hand. After all, it is extremely important that the stapler is comfortable to work with. Evaluate the quality of all fasteners and the strength of the case, because the durability of the unit itself will directly depend on this. In addition to the main characteristic (impact force), consider other equally important aspects:

• The presence of a narrow tip (increases the accuracy of the strike).
• Ergonomic handle.
• The presence of a special screw for adjusting the impact force (a convenient option when working with materials of different densities).
• The presence of a transparent window in the magazine area for staples.
• Equipping the tool with a special stopper on the handle (promotes safer use of the stapler).

Selection of staples

Staples for furniture staplers have different widths and thickness. The choice of one or another consumable material depends on the tasks assigned and the specifics of the work. For example, long staples are usually used to secure durable and thick coverings. When to commit electrical cable, choose staples of a specific (U-shaped) shape.

The most common type of staples for furniture staplers is No. 53. They have a standard rectangular shape. The width of these staples is 11 mm and the thickness is 0.75 mm.

Experienced craftsmen strongly recommend using only branded staples. They are perfectly sharpened and made from high quality of stainless steel, which protects them from corrosion. Such staples provide maximum shot accuracy and fully comply with their drawing data.

How to load the stapler with staples and get to work? Read more about this.

How to assemble a stapler?

So, you have purchased a good unit and selected the right one for it. consumables. How to thread a stapler with staples? There's nothing complicated about it. In general, the procedure is similar to refilling a regular office stapler. The algorithm of actions is as follows:

• Open the box of staples and carefully remove one block from it.
• Using both hands, open the bottom of the stapler.
• Holding the unit in your left hand, pull the spring all the way.
• Insert into groove new block with staples.

Some models provide a different filling principle - they are equipped with a special retractable chute into which the block with staples is loaded with the sharp ends down. How to put this type of stapler back together? Very simple. To do this, the filled gutter must be inserted into the device until it clicks. After this, you should make a test shot with the stapler to check its functionality.

Common stapler malfunctions and their causes

Absolutely any construction stapler can start acting up. The most popular malfunctions and their possible causes are presented in the following table:

The essence of the breakdown	Possible reasons
Staples don't fire	The spring is broken Problems with the drummer The board has failed (if we are talking about an electric stapler)
Consumables get stuck during operation	Staples are not the right size The magazine or chute is too dirty Staples with obvious defects are used
Staples are driven weakly or incompletely	The stapler control is not set correctly Spring wear or compression
When fired, two staples fly out at once	The brackets do not fit the unit in size Striker wear Impactor deformation

One way or another, the most common problem is the first. In this case, it is necessary to disassemble the stapler and perform certain manipulations with the striker - its main part. To do this, you should perform a number of actions:

• Remove the adjusting screw.
• Remove the spring (at the same time, check its integrity and, if necessary, replace it with a new one).
• Disassemble the tool's protective body by removing all washers and pulling out the pins.
• Take out the impact mechanism and examine it carefully.
• If the striker turns out to be worn out, then it should be clamped in a vice and using a file, give it its original shape.

How to properly assemble a stapler after repair? You should simply perform all of the above steps, but in reverse order. In this case, you must not forget to lubricate the impact mechanism.

To maximize the shelf life of the stapler, it is recommended to store the device under the following conditions:

• The air temperature should not be lower than +5 degrees.
• Relative air humidity - no more than 70%.
• The construction stapler should be stored away from any acids, alkalis, as well as various abrasive and crumbly substances.

As a result, we can say that a furniture stapler is a durable and quite reliable tool. If only you use it correctly and wisely. Repairing such a unit cannot be called too complicated, which is also a big advantage.

Among the many different instruments, there are quite in great demand uses a device that can be used to hammer staples and small nails. This instrument is called a tacker. Among the people, another name has stuck - stapler. Often the words “construction” and “furniture” are added to this name. Construction stapler various designs used by professional builders and DIYers. This tool holds various parts together with special staples and nails. different sizes and shapes.

A construction stapler is used to fasten various parts.

It is very convenient to use large staples. Fastening occurs simultaneously at 2 points, the part is held much more firmly than if attached with a single nail. The crossbar of the staple grips and holds the piece more securely than the head of a nail. The stapler is capable of hammering nails up to 32 mm in size and up to 1.6 mm thick. The staples are very similar to the staples of office staplers, only larger and more powerful. They have legs of different lengths for fastening different construction and furniture upholstery materials. They fasten fabrics plastic siding, plywood, fiberboard, cable.

Benefits of a stapler

Any stapler has its advantages:

The device of a construction pneumatic stapler.

• the tool saves time and effort;
• You can work with only one hand;
• you can perform work in an uncomfortable position, while on scaffolding, on slings, on a stepladder;
• there is no risk of damage to the workpiece;
• the ability to use different consumables;
• equipment reliability;
• greater tool durability;
• simplicity of design and operation;
• use of anti-corrosion consumables;
• safety when performing work.

Return to contents

Instructions for use

To operate the stapler correctly, it is enough to follow the requirements and recommendations of the following instructions:

The electric stapler operates on mains voltage.

1. A professional construction stapler works using a powerful spring. The spring is activated by a special release lever in the form of a handle. Tools with electric mechanism are available. They receive energy from the network or from a battery. The network connection keeps the tool running throughout the entire working day. The rechargeable device requires periodic recharging.
2. The construction stapler is not equipped with any safety locks to prevent the staple from flying out. Therefore, if you work carelessly, you can injure your assistant or yourself by shooting in the leg or arm. A bracket that secures the trigger handle can serve as protection. Otherwise, there are no special rules for using the tool. You just need to mark a line to indicate where the staples or nails will be installed. Staples are driven in along this line. To remove a staple or nail, you need to use a special tool that resembles pliers.
3. The tool must be charged before use. For this purpose, a special cassette magazine is provided into which staples or nails are inserted. Each stapler model has a different one and the charging system is slightly different. When purchasing a tool, the seller must show the charging method. In any case, staples are sold in packs of 1000-5000 pieces. From 80 to 100 pieces are placed in a cassette.

Return to contents

Types of instruments

The design of a pneumatic stapler involves driving in staples not using compressed air energy.

A construction stapler is a fairly versatile tool. With its help, upholstered furniture is upholstered in furniture workshops. This can also be done at home. Covering the frame of a garden greenhouse with plastic film is quite a feasible task for such a tool. The tool is available in several versions:

• electric;
• pneumatic;
• mechanical.

Each of these devices has its own individual properties. One of the properties is the depth of the staple. It ranges from 4 to 14 mm. Tools are charged with such brackets household use. For furniture upholstery, an 8 mm staple is sufficient; for other work, a different size is needed. The most common staples are type 53. This type has the following characteristics:

• thickness of material for manufacturing – 0.7 mm;
• staple width – 11.4 mm;
• depth (leg length) – 4-14 mm.

Type 140 staples are used with some types of tools. They have the following dimensions:

• thickness – 1.2 mm;
• width – 10.6 mm;
• depth – 4-14 mm.

When purchasing staples, you need to remember what type of stapler your stapler works with. Type 36 semicircular staples are used for cable fastening. Type 300 are nails. Staples of any type can be simple or hardened. Simple ones drive well into wood. For laminated wood and plywood, for fiberboard and chipboard, it is better to use hardened staples.

Some models of staplers may have adjustable impact force. These are usually those tools that are capable of shooting 14mm staples. By rotating a special regulator, the working spring of the tool is compressed or released. Any tool can be professional or household. The construction stapler is no exception.

The professional version differs from the household version in its resource. It is approximately 10 times longer than the tool life for household use. Their prices also differ significantly from each other. Among household tools, products from Zubr, Fit and Stayer stand out for their quality. High-quality professional devices are produced by Rapid from Sweden. They have a 2 year warranty. All these tools are much more convenient than a hammer and nails. The speed of work is many times higher, while only one hand is occupied; the other hand can support the material.

Return to contents

Tool selection rules

A mechanical stapler drives staples through human physical effort.

For the right choice construction stapler, you need to determine the following points:

1. Completing the task.
2. Stapler type.
3. Main characteristics.
4. Price.
5. Proportions.

To make the right and error-free choice, you need to decide exactly what the stapler is needed for. For rare use at home and for work in production, you need completely different tools.

You need to carefully familiarize yourself with the different types of products, their advantages and disadvantages, and then choose the tool that best suits your requirements.

Be sure to study all the parameters of the product, its performance characteristics. Pay attention to the presence or absence of additional functions, inquire about the materials from which the stapler is made. You need to check the impact force on a piece of chipboard right in the store. Or just pay attention to what length of staples the tool can work with. If there are devices that work with staples of sizes 4-8 mm and 4-14 mm, then preference should be given to the 4-14 mm option.

It is advisable to look and compare prices for similar products in other retail outlets and choose the most profitable option for the relationship between quality and price of products.

Return to contents

Advantages and disadvantages of different types of tools

Any type of instrument has its own characteristics.

Mechanical stapler.

Advantages:

• low price;
• rarely breaks due to the simplicity of the design;
• greater mobility;
• safety.

Flaws:

• requires some physical effort;
• The operating speed is quite low.

Electric stapler.

Advantages:

• no physical effort required;
• the speed of work is much higher;
• fairly high power of the device.

Flaws:

• the price of the tool is higher;
• a source of electricity is constantly required;
• the range of the device is limited by the length of the electrical wire;
• significant weight of the device.

Pneumatic stapler.

Advantages:

The classic bracket has a U-shape, its width is 11.3 mm, and its height is variable.

• work speed is very high;
• high power.

Flaws:

• the compressor required for operation increases total weight, sizes and price of equipment;
• Most often used as a permanent installation.

The mechanical version of the tool is the most popular among buyers. A simple device consisting of a housing, a powerful spring and a release lever. The spring is compressed by mechanical force, then straightens and hammers the bracket.

The electric stapler refers to professional devices. It is very easy to operate, since the spring is compressed using an electric drive. The product is characterized by high impact force and high operating speed. The only thing that gets in the way is electrical cord, especially when working outdoors, on the roof of a building. It can bend and break. It is necessary to constantly monitor the reliability of its insulation. The weight of the tool is quite significant, as is its price.

A type of electric stapler is a battery-powered tool. It is more autonomous and convenient for working at heights. The battery charge lasts quite a long time.

Pneumatic stapler also applies to professional equipment. All work is done using the energy of compressed air. The disadvantage is the need for a compressor. Its presence leads to increased installation costs. Such equipment is used almost exclusively in production.

For furniture - a construction stapler can do it all. This device is also called a staple gun, stapler, nailer, staple gun, and tacker.

Types of staplers

The first step is to decide what type of staple gun you want. Type driving force construction staplers are:

If you need a construction stapler for one-time work - only during the construction or finishing of a house or apartment, choose a mechanical or electric one. Mechanical works in any conditions, electric only in places where there is electricity. Even battery-powered models require periodic charging. Yes, you can buy a second set of batteries for them and while one is working, the second is charging. But charging also requires electricity.

Pneumatic staplers are purchased mainly in workshops for professional use. For one-time work this equipment is too expensive and very noisy.

Professional or household

Like all other tools, construction staplers are conventionally divided into professional and household. The difference in price is very significant - many times over. And this is justified. It's a matter of functionality, number of settings, operating modes and working resource. Household models have a short working life, as they are mainly made of plastic.

Professional models are made of steel, often stainless steel. They have plastic elements, but these are metal handle covers to soften recoil. It is clear that they will work longer, and they are usually easier to work with - staples fit easier, jam less often, etc.

There is also an intermediate class - semi-professional. They fall between these two categories in price and quality. Often it is in this group that you should look for equipment for home use. It works fine and doesn't cost much.

How to choose a mechanical stapler

A mechanical stapler is one of the most common tools. It costs very little, but is used for many jobs and operations. In terms of structure, mechanical staplers come in two types: with a coil spring and with a spring (plate).

Coil spring staplers are the cheapest models. This tool belongs to the household category. They are simple, but during operation they require significant effort to cock the mechanism again. In addition, over time, such springs lose some of their elasticity and begin to work worse. Another unpleasant moment is the high recoil force. Such models are suitable for short-term use - the load is too heavy.

Professional mechanical construction staplers are made using flat leaf springs. They provide smoother operation, less recoil, have a longer service life, but are more expensive.

If you plan to work for several hours, get this type of tool. It will justify itself, and there will be applications - a lot of different operations can be done with such a device. It is especially useful for those who try to do a lot with their own hands. It is used very often during construction, and will come in handy later on the farm.

Important points

When choosing any mechanical stapler, pay attention to:

Also, for safe transportation and storage, it is desirable to have a “stressless release” function or the ability to jam the mechanism - often this is just a metal loop that fits over the handle.

How to refill

A construction stapler can have two types of magazine. It is more convenient to use if the store opens. Then refilling a construction stapler is as simple as a stationery stapler: the spring is pulled back, a block of staples is inserted, and the spring is released. That's it, you can work. During operation, at any time you can remove the stuck bracket, correct the block, etc.

If the magazine is retractable, inserting staples into the stapler is also easy: after releasing the latch, pull out the spring, insert the staple block, return the spring to its place, fixing it in the flap.

How to fill a staple gun with staples

With such a structure, removing a stuck staple can be problematic. You will need to pick it out of the striker, and this can be dangerous - do not forget to block the release mechanism.

What kind of fasteners can it work with?

There are three types of staples that mechanical staplers work with: U- and U-shaped staples and pins (shaped like the letter T). Naturally, it is better if the device can work with all types, but these are usually not cheap models. Yes, and U-shaped brackets are needed mainly when laying cables, and this, you see, is a specific job, and T-shaped ones are used infrequently, since they do not provide stable fastening, but they are indispensable if it is necessary to make the fasteners as inconspicuous as possible.

However, U-shaped staples are most often needed. They are almost universal, available with different back thicknesses and leg heights, and are selected for the type of work. The characteristics of the stapler usually indicate the maximum length of the legs that this unit can handle. On average it is 10-15 mm. By this indicator you can judge the power of the impact - the longer the staples a construction stapler can hammer in, the more powerful it is and the easier it will cope with the job.

Electric construction stapler

An electric staple gun is necessary for frequent and long-term work, as well as in cases where it is necessary to use large staples - the power of these devices is much higher. The average length of the legs is 20-25 mm, and the maximum length for some professional models is up to 50 mm. Some models can work with nails, but you have to look for such a function.

Main settings

The first indicator that is worth paying attention to is the number of “shots” per minute. The average figure is 20-30 pieces, the high figure is about 50. If time is short, such slowness is annoying, but in this case, use pneumatic staplers. They are the fastest firing.

If we talk about electrical power, then it is relatively small - no more than 1.5 kW and almost all models operate on 220 V. If you are planning to buy an electric stapler that runs on mains power, pay attention to the length of the cord - the longer it is, the more convenient it is to work.

If you decide to purchase a battery model, choose one with a larger battery capacity or a second battery included. It's also a good idea to know the charging time - the shorter the better. And one more thing: if you already have some cordless tools, it makes sense to buy a construction stapler of the same brand or with similar batteries - they will be interchangeable.

And finally about the electrical part: look how long an electric stapler can work without interruption. That is, how much time, during active use, will pass until the engine heats up. When overheated, the power is significantly reduced, and the staples become clogged worse. If such a situation arises, take a break.

But with all this, we must take into account that an electric construction stapler weighs from 1.5 to 2 kg, which is quite a lot if you have to work on vertical surfaces. Yes, the effort when pulling the trigger is minimal, but it is difficult to maintain the weight during prolonged use. So, when choosing, we also pay attention to weight.

More about the appearance: the body is made of impact-resistant plastic, but it is better if the platform (lower part) is made entirely of metal.

Additional functions

To adjust the operating mode to specific conditions, it is convenient if there is a smooth adjustment of the impact force. There are also switches that have several operating positions, which is also good.

Protection against arbitrary operation will help prevent troubles. If an electric construction stapler has such a function, it “issues” staples only when the working part comes into contact with some surface.

Pneumatic staplers

This type of tool is used mainly in medium and high power production. It is characterized by high productivity: a speed of 50-60 staples per minute is the norm. A pneumatic construction stapler differs in structure: there is no spring, the impact occurs due to the energy of compressed air. The air supply is provided by a compressor, and the moment of supply is determined by pressing the trigger. In stationary models this can be a foot pedal, but in manual models it can be a familiar trigger or button.

When choosing, you should also pay attention to what fasteners this unit can use. By the way, they can drive even longer staples and nails - on average 50-80 mm, but you can also find those that work with 100 mm nails.

For this equipment, the most important parameter is operating pressure. The minimum is 4 Bar, on average 5-6 Bar. Accordingly, the compressor must guarantee the required pressure.

One of the positive aspects is the light weight of the pistol - only about 1 kg. And this despite the fact that they are mainly made of steel.

Staples for staplers: types and selection

As already mentioned, each staple gun works with a specific fastener. When going to the store to buy new braces, you need to know the type, or at least the sizes. Information about the type of staples is in the product passport or on a nameplate (metal plate) with information attached to the body.

Staples for staplers are made from different metals:

In addition to the material and dimensions (length of the legs and width of the back), you also need to look at whether the legs are sharpened or not. For soft materials this doesn’t matter, but when working with hard ones it can be a decisive point: sharpened ones fit much easier into the densest boards or plastic.

A furniture stapler is a tool that is used to fasten or fasten parts that are made of not very hard materials. Fastening is done using special staples for furniture staplers. These staples come in many variations and vary in size, material and color depending on the job. There are also different types of furniture staplers, reviews of each are available on the Internet. This tool has many different names (tacker, staple gun, staple gun, etc.). This is due to the fact that this tool quite popular and widespread among the people.

Furniture stapler, electric and manual: device and tips for choosing a tool

Not everyone knows how to choose a furniture stapler. It is worth noting that when choosing such a tool, you need to take into account that it has many varieties. Therefore, you need to take into account the operating parameters and characteristics of the technical parts with which you will work, as well as the structure of the furniture stapler itself. Having studied all the nuances, you can go to the store and buy a furniture stapler.

A manual furniture stapler is a mechanical tool that can be operated using physical force. The main advantage of a hand tool is its mobility and independence from electricity, as well as from other energy sources. The requirement of physical effort is the main disadvantage of a manual stapler, since large volumes of furniture upholstery work require a huge amount of time. This fastening tool can only be used for partial or complete reupholstery of furniture at home, and not in factories with industrial volumes. It is better to purchase these tools from companies such as gross, matrix and similar companies.

An electric furniture stapler is a tool that operates using electricity or a battery. The best thing this type The unit should be used for medium-sized furniture upholstery work. The main disadvantages of this type of stapler are: the low rate of fire of the mechanism, the weak impact force of the tool, as well as its rather rapid wear.

For industrial-scale work on furniture upholstery, a pneumatic furniture stapler is used. Because it is fast, durable and strong compared to other types of similar construction units.

Video “furniture stapler”: how to use, how to charge, and what staples are needed

In order to avoid injury from a furniture stapler, it is important to thoroughly understand how to use such a tool. If you are using a mechanical stapler, first adjust the adjuster screw. The adjustment must be made on the rough material, rotating the regulator from minimum to maximum. If the fastener does not enter the material from the first blow, then you will need to adjust your furniture stapler again, and if it does, then start working on the “finishing” part. It’s worth finding out in advance how to charge a furniture stapler. This can be read in the instructions for the unit.

To drive staples at the required distance, it is best to mark such places in advance using a pen or pencil. You can also use a clamp, which must maintain the same distance when driving in fasteners without preliminary markings.

Don’t forget to also hold the material while making shots so that the material cannot move when driving in the staple. Do not forget to also monitor the presence of staples so as not to be left without them at the most inopportune moment for you.

When the tool is not in use, secure the handle with the safety lock. This is required for safety reasons. When doing these simple recommendations, you can easily cope with upholstery of a sofa or other necessary task associated with a furniture stapler; the price always depends on the type of tool and its manufacturer.

Furniture stapler, instructions for use: how to choose staples?

The instructions for the device contain data that you should rely on when choosing brackets:

• The depth of the staples – it can vary from 4 to 14 mm. This parameter is determined by the nature of the work to be done. For example, a tapestry on the back of a chair can be “shot” with 8 mm staples, but for felt you will need to use a depth of 10 – 12 mm.
• Type - it all depends on the model; the markings on the packaging should be the same as in the description of the device. For example, if the staples are too small for a particular device, they can be “shot” several at a time. In addition, distortion of the staples in the tray is almost inevitable.

In addition, you should be wary of the seller's recommendations to replace one type of bracket with another similar one. Charges that are similar in depth may differ in geometry, which may not be noticeable to the eye, but is critical in the operation of the stapler.

How to choose the right furniture stapler?

Are you wondering how to choose a furniture stapler? Everything is very simple here: we make our choice based on the type of work we have to do. So, if you need a device for upholstering a sofa or chair, then you can get by with a mechanical device, because furniture frames are usually made of soft wood. The force exerted by the hand on the mechanical stapler will be quite sufficient for the job.

If you have to work with harder materials, for example, chipboard, then mechanics are indispensable. An electric furniture stapler will have sufficient power. Pneumatic tools are even more powerful, but they will most likely be a waste of money. It makes sense to buy pneumatics for use in construction work.

A high-quality mechanical stapler, what is it like?

A mechanical stapler for furniture is not complicated. However, its design has features on which the convenience and efficiency of using the device depends. Attention should be paid to the following:

• Store transparency. It is not at all critical for the operation of the device, but it will be very convenient to control the number of staples.
• Screw for adjusting impact force. Different densities of wood and thickness of upholstery - regulation here will greatly facilitate the work.
• Narrow working tip of a furniture, mechanical stapler. Provides greater precision in the installation of staples.
• Stopper on the handle. This is a safety issue - you will be protected from an accidental “shot”.
• Rubberized handle. Greater convenience when working, the device will not slip in your hand.

Electric stapler for furniture: mains or battery?

A cordless furniture stapler is very convenient because the person working with it is not tied to a source of electricity. That is, you can operate the device even in a country house where there is no electricity. As a rule, the battery capacity lasts for quite a long time. This stapler has no obvious disadvantages, but it is worth purchasing it only if there is a need for wireless access.

In all other cases, it is better to choose a furniture stapler, electric, powered from the network. And that's why:

• A network device will have more power than an independent one.
• Even the most capacious battery tends to run out.
• The price of a network stapler is lower.
• The weight of the battery device is higher, which means it is more difficult for them to work for a long time.

Rules for using a mechanical stapler: how to charge the device?

It’s not difficult to figure out how to use a furniture stapler. But let's take a closer look at the process of charging a mechanically driven device.

• We put the stapler on safety.
• In the back of the device we find a flap that covers the hole in the “clip” for staples and fold it back.
• We pull the rod with the spring out of the hole.
• We insert a block of staples inside, with their “backs” towards the handle of the device.
• We return the rod to its place, clamping the staples inside the stapler with it.
• Lower the sash until it clicks. Then you can start working.

How to use a furniture stapler: the video provides an overview of the mechanical model.

How to choose a furniture stapler so that it is safe?

For devices with any drive, mechanical or electrical, a stop button is required to protect against accidental operation. Actually, for a mechanical stapler such a stopper is quite enough. But to be considered truly safe, an electrical device must also have protection against “idle” operation. That is, the “shot” should occur only when the working part of the stapler is pressed against the working surface.

In addition to human safety, there is also the concept of “work quality control”. This is a very useful feature that will protect you from undetected flaws in your work. It lies in the fact that the electric stapler will turn off every time the staple is not hammered in completely or crookedly. This way you can notice the defect in time and eliminate it.

How to properly thread a pneumatic furniture stapler?

Let's take a closer look at how to insert staples into a furniture stapler. The very first thing you need to do is lock the device. This way you will protect yourself from injury due to an accidental “shot”. Next, the sequence of actions will be as follows:

• We find and press the button responsible for opening the boat for the staples. After pressing, either the tray lid will “pull off” or the tray itself will slide out of the handle. It all depends on the design of the model.
• We turn the device over and once again make sure that it is locked.
• We put the staples for the furniture stapler into the tray, with their “backs” towards the device, and their “legs” towards you. Make sure they lie flat.
• Close the tray until it clicks.
• Turn the stapler over with the working side facing away from you and remove the lock.

After charging, the tester must be tested. After this, do not forget to lock the mechanism again.

More questions on your topic:

How to choose a quality furniture stapler

Types of furniture staplers

Furniture staplers come in different types. When going to the store to make a purchase, you need to clearly understand for what purpose the tool is being purchased. And what parameters should it have?

Before you start working with the tool, you should understand its functioning. So, before you start working with a mechanical stapler, you should first adjust it. To do this, you can use rough material on which several test shots are fired. When changing the regulator on the instrument, you should achieve the desired result and only then start working on clean material.

To ensure that the staples are placed at the same distance from each other, the landing sites should be marked in advance with a pencil. The material must be held when making shots so that the upholstery does not move out. You should always monitor the number of staples remaining in the tool.

If the stapler is not planned to be used in the near future, then it is better to put it on safety.

Choosing a furniture stapler

The choice of tool is carried out based on the nature of the work ahead. For example, A mechanical stapler is suitable for upholstering sofas or armchairs. Soft wood is used to make furniture frames. The physical effort applied to make the shot will be quite enough.

If you have to work with hard material, then mechanics will not help here. For this type of work, you should get an electric stapler. Certainly, pneumatic tool even more powerful. but it is better to use it during construction work.

How to choose a quality mechanical stapler?

The design of a mechanical furniture tool is not that complicated. But it has features that affect ease of use:

How to choose staples for a furniture stapler?

When choosing staples in a store for a mechanical furniture stapler, you need to proceed from the information given in the instructions for the device and be guided by certain parameters.

Charging the mechanical stapler

Working with a mechanical tool is easy. However, let’s take a closer look at the process of charging a mechanical tool.

Safety precautions when working with a mechanical furniture stapler

In any device, both mechanical and electrical, there is always a stopper. It protects the device from unplanned operation. Accordingly, in a mechanical tool the design of the stopper is quite simple. Whereas for safe handling when working with an electric stapler, the tool is provided to operate only when its working part is pressed against a section of material.

In addition to the security system, the electric stapler equipped with quality control function. It will be able to protect you from undetected errors in your work. And it lies in the fact that if the staple is not completed to the end or is bent, the device turns off. Thanks to this, you can see the defect in time and correct it.

Electric stapler

You can work with the battery unit while being independent from the electrical network. That is, you can take the device with you to your dacha or any other place where there is no electricity. The battery can supply electricity to the tool for a long time. Although cordless stapler and has no major disadvantages. but it’s still worth purchasing such a tool only when there is no way to connect electric tool to the network. The fact is that:

• A mains-powered device operates with more power than its battery-powered counterpart.
• Any battery will discharge sooner or later. This tool needs constant recharging.
• The cost of the network tool is lower.
• A cordless stapler weighs more, which means that working with it is not as convenient.

Charging a pneumatic furniture stapler

The pneumatic stapler is reliable, fast and powerful. He can handle any task. However, To work with it you need a compressor. which will create the necessary pressure. Usually it is used only in production, but there are exceptions. If you decide to open your own furniture or construction company, then this choice is for you.

Charging the air stapler is easy. First of all the device must be locked. to protect yourself from accidental activation.

1. Press the button that opens the staple tray. After this, the tray cover will open or the tray itself will slide out of the handle.
2. Once again, make sure that the device is on the fuse.
3. The staples are placed in the tray with the legs facing towards you. Check that the staples lie flat.
4. The tray closes.
5. The stapler is turned over with its working side facing the material, the lock is removed and you can start working.

To repair furniture in the house, it is better to use mechanical tools. For large-scale work, it is better to choose an electric one. If you are going to open your own production, then you should opt for a pneumatic device.

How to use a furniture stapler: device, operation, tips

A furniture stapler is a fairly universal tool with which you can not only perform furniture upholstery procedures, but also a number of other construction operations. Today there are several types of such equipment. differing in operating principle - pneumatic, electric and manual. Models belonging to the latter type are the most common in the furniture industry due to their mobility and ease of use. Let’s use this example to look at the principle of operation, operation and repair of furniture staplers.

However, before moving on to this procedure, I would like to say a few words about staples and their varieties.

Characteristics and types of staples

The main indicator that is taken into account when choosing a bracket is its depth. Depending on the nature of the work performed, this indicator can vary from 4 to 14 millimeters. So, for example, in order to carry out the procedure of upholstering furniture with fabric, a staple with a depth of 8 millimeters will be sufficient, while for fixing thicker materials, a staple with a greater depth should be selected.

Also, depending on overall dimensions, staples are divided into the following types:

• 53 is the most common. Staples of this type have a width of 11.4 millimeters and a thickness of 0.7 mm. The depth of this fastening element varies from 4 to 14 millimeters;
• 140 – having the following characteristics: width – 10.6 millimeters, thickness – 1.2 mm, depth – similar to the previous type;
• 36 - this marking means that the stapler can shoot staples that have a semicircular shape and are mainly used for cable installation;
• 300 are special nails intended only for the stapler.

When choosing a bracket, you should also take into account the structure of the material from which it is made. So, ordinary steel staples are perfect for working with ordinary wood. However, if you are dealing with particle boards or plywood, you should purchase staples made from hardened steel, as regular ones may simply bend.

How to use a stapler

In order to load the stapler with staples, you must first move away the spring intended for pressing them. The staples themselves are placed in a special groove, in which, in fact, they need to be placed. After this, the spring is put in place. The tool is completely ready for use.

In order to fix the necessary element, you should firmly attach the device to the place where you plan to hammer the bracket. After this, without lifting the device from the surface, you must press the trigger button (lever). If these manipulations are successful, you will hear a characteristic sound and see a staple inserted into the material.

In order to protect yourself when working with a furniture stapler, you should follow some rules:

• in case of using a mechanical model of the device, it is necessary to adjust the screw regulator. This operation should be performed on a piece of rough material by rotating the screw from minimum to maximum. If the staple goes in all the way from the first shot, you can start working on the “finishing” part. Otherwise, re-adjustment is required;
• in order to drive the staples at the same distance, you should first mark the necessary places with a pencil or ballpoint pen;
• hold the material with your free hand so that when firing it does not move from the pre-designated place;
• monitor the number of staples in the “store” so as not to be left without a single fastening element at the most inopportune moment;
• After finishing work, secure the handle with the safety catch to prevent spontaneous or accidental shooting.

In addition to all the above tips, you may also need help repairing this construction tools, since the stapler, like any other equipment, tends to break.

The most common cause of stapler failure is a breakdown of the impact mechanism. However, in order to get to it, you must first disassemble the tool. This can be done by performing a number of simple operations:

• remove the adjusting screw;
• remove the spring;
• remove the protection cover;
• remove the pins;
• remove the lock washers.

After performing all the above manipulations, you will be able to see the drummer, which, for the most part, fails due to the exhaustion of its resource. In order to repair this element, you should remove it, place it in a vice and, using an ordinary file, give the striker its original shape. That's it, the repair is completed, and the instrument is again in full combat readiness.

Video review of staplers

You can also look short video on a review of furniture staplers, as well as the principle of filling, setting and working with them:

How to choose a furniture stapler? Furniture stapler structure, instructions for use

October 30, 2015

Modern technologies allow you to independently equip your home with all the necessary furniture elements and decorate the house to your liking. In this case, a unit such as a furniture stapler can be useful. It is important to choose the right brackets for effective fastening furniture fittings And the desired model devices. How to use a furniture stapler?

Operating principle and purpose

What is the mechanism of such a device based on? The structure of a furniture stapler consists of several elements.

Electric furniture staplers are the most popular option.
Electrical connection ensures uninterrupted operation and supply of staples, saving time and effort. During the firing process, the staples are pierced into a wooden plane and strengthened through the fabric into the furniture piece. This allows the upholstery to be held in place by staples, from which only the back is visible - a thin metal strip. The clamping area looks neat, the fabric is firmly and securely fixed in the right place.

This is a convenient device that can be useful to almost everyone, not only professional builders. It often uses not only staples, but also nails. Sometimes a furniture stapler is called a construction stapler due to the fact that it is often used in repair and construction work and when assembling furniture in factories.

Varieties

Different tasks in upholstery require specialized equipment. Mechanical furniture staplers are divided into the following types:

— mechanical;
- reinforced - for large and powerful staples;
— electric;
- pneumatic and others.

Guided by knowledge of varieties and possibilities different models, you can easily figure out how to choose a furniture stapler to achieve specific construction and repair goals.
Buy a household or professional device on the market or in a specialized store - the choice in this case is determined by the range of problems that this useful device should help solve.

Mechanical devices

This type of design includes a spring, which is the driving element. The advantages of a mechanical stapler are low, affordable price, as well as ease and independence from electrical networks. Hence its disadvantages. Manual work requires your own efforts. This device can be used in upholstery of furniture made of coniferous species, due to their soft structure they are easier to process.

High power devices

When working with hard joints such as chipboard or particularly dense wood, it is most effective to use reinforced staplers. They usually require large and durable brackets - to determine their length, you should look at the characteristics of the unit. If one type of stapler can hammer staples up to 8 mm long into furniture, then reinforced ones can hammer staples up to 14 mm or more into furniture.

Electrical units

The most convenient to use is an electric stapler, which is easy and convenient to use in home reupholstery of furniture. Some models allow you to perform work at an almost highly professional level. The disadvantages of such devices are: high cost, dependence on the power supply, and low operating speed (rate of fire). On average, such a stapler delivers about 20 staples per minute.
At the same time, there are quite a lot of fakes of well-known companies from China on the market. If the price does not exceed 800 rubles, then it is most likely a fake. A quality product costs at least 2 times more.

Pneumatic device

This best choice according to many parameters. Pneumatic staplers are the fastest, strongest and most reliable devices. Their speed capabilities are practically unlimited, which is why they are often used in assembly shops of furniture factories.

But a pneumatic unit requires accompanying equipment - a compressor that creates pressure. Therefore, such a model can be considered stationary and used in one area of ​​work.

How to choose a furniture stapler? Instructions for use

If the issue of choice has been resolved, then further work with it should begin with learning how to properly handle such a unit.

The furniture stapler, instructions for which are included in our article, implies the presence of a main consumable resource - metal staples. In the process of firing, they connect the fittings to the furniture.

The worker’s task is not only to think about how to choose a furniture stapler, but also to observe safety precautions during the work process. So, instructions for work:

1. Electrical appliance operating from the mains, it is important to turn it off during breaks and maintain insulation from possible electric shock. Grounding objects should be used.

2. The battery should be recharged regularly for smooth operation.

3. There are no guards inside the stapler to prevent the staple from flying out. It is very dangerous to get hit by a flying nail, which can pierce your arm or leg. As protection, you can use special brackets that will fix the handle in a safe position.

4. It is necessary to mark in advance a line that establishes the location of the fastener. This will save time and allow you to aim accurately.

5. You need to remove incorrectly driven staples using a special nail puller or pliers.

6. Before use, the device is charged with a special cassette or a series of brackets are inserted - depending on the charging system that is available in a particular model.

While working, do not put your fingers or other parts of your body under work area stapler - this may cause injury.

Selecting staples

Furniture staplers, including the types of staples they require, are usually made from two materials. This is hardened or regular metal.

In construction markets, hardware hypermarkets, and specialized stores you can always find suitable staples for a furniture stapler. How to choose suitable option? You should pay attention to the characteristics of the device in the instructions. The optimal size of brackets for the relevant types of work and effective fastening are always indicated there.

The size of the staples depends on the density of the material they will be fastening. If we are talking about thin delicate fabric, then small parts measuring 10-14 mm are sufficient, and thick and dense fittings and leather are best connected with staples up to 16 mm long.

If we are talking about using nails, then the thicker they are wooden parts when fastening, the longer the nails required (14-16 millimeters, and sometimes 32 mm with a thickness of 1.6 mm).

Staples are usually sold in sets - one package contains approximately 1000-5000 units. In cassette charging, one cassette includes about eighty to one hundred pieces.

If there are no instructions for the device or in a situation where it was accidentally left at home, the store salesperson will help you choose the right size of staples. It is better to have a spare box of staples while working - consumables are used up quite quickly and can run out in the midst of the furniture upholstery process.

Refilling the device yourself

Purchased device, brackets the right size selected. How to thread a furniture stapler with your own hands?

The principle of this operation is similar to the stationery version, which holds paper and cardboard together. The construction stapler differs only in size and purpose. The refueling process is extremely simple. It consists of several stages:

- print out the box with staples;

— remove a separate block of fastened staples - you should remove them carefully, they may come apart;

- open the stapler with both hands, holding it in your left hand, pull back the spring;

— insert a block of paper clips into the free groove;

Some models have a different filling principle - they have a retractable chute that moves out when a special button is pressed. This groove must be taken out, taken in your hand and inserted with the ends downwards. Next, the filled trough is inserted back into the device until it clicks.

Then a test shot should be made to check the quality of the staple.
In this case, the paper clips will be in the desired position, even if they were inserted incorrectly when threading. If a jam occurs or the device jams, you should remove the stuck paper clips and re-fill the threading procedure. The test is carried out on the material by clicking two or three times to test the operation of the device. The device is ready for use.

Optimal model - choice in store

How to choose a furniture stapler for your home? To reupholster one sofa or set you can buy at construction market simple electric model. If your plans include large-scale professional work with a large number of constrictions in the future, then such a modest unit will not be enough. In this case, you should choose a durable and high-quality machine.

During the purchase process, you should pay attention to the functioning of the main working part of the device, which provides the impact force. It is also recommended that you carefully review the type and size of staples it uses. It is possible to purchase models with a convenient spout, which helps to reach hard-to-reach areas in the furniture body and carefully secure the upholstery around the entire perimeter, positioning each bracket more accurately. The quality of fastening directly affects the result - the condition and durability of the furniture.

Sometimes a nail, rather than a staple, can serve as a fastener. This is a rather dangerous type of work that requires specialized staplers. The staples are suitable for working with fabric, leather, and various upholstery materials. If you have to work with chipboard or small wooden blanks, you can additionally stock up on nails.

After the buyer has read the information on how to choose a furniture stapler, he should clarify how often the device will be used. Working in a workshop at a professional level or doing home design experiments are different types of activities that require different investments. Many modern manufacturers They supply home versions of the devices with various additional attachments and safe elements that allow them to easily and without problems perform various types of construction and repair work in addition to the main function. Undoubtedly this important point in the daily use of such a useful tool.

When purchasing a furniture stapler, you should pay attention to one important detail - the presence of a case for storing it. Usually, all expensive models are necessarily accompanied by such a case, which may also contain spare brackets, additional components and instructions, and a warranty card for the device. This is important in view of the long-term prospect of using the device - to maintain durability, it must be stored in good conditions.

Having a case is especially convenient if the tool will be transported from place to place - from an apartment to a dacha, to a construction site. It is best to choose a model with a branded case, but you can buy a special box separately. Often it already comes with a set of additional fasteners.

Furniture stapler - reviews

The popularity of such a device indicates the degree of its prevalence and breadth of application.
Some users prefer German-made models (for example, Krause), others are content with Chinese inexpensive analogues or domestic devices.

Experienced users recommend: if you plan to use the device quite often, then it is better to give preference to the option with an all-metal case. These models are quite resistant to external damage and will withstand severe tests when working with hard wood. This applies to Gross devices.

Other owners emphasize the advantages of simple devices for simple decorative manipulations: “If you need to cover small furniture elements, banquettes, chairs made of soft wood or common chipboard, your hand will not get tired, holding a simple stapler with a plastic body is quite enough.” The most popular model is Presmak.

Most buyers agree that it is important to pay attention to the size of the handle. Whatever the quality of the tool, if it is uncomfortable to hold, then half the work may turn out to be of poor quality due to the awkward position of the hand. The handle should optimally fit the size of your palm. The length of the handle should be approximately equal to the width of the palm. This will ensure ease of pressure when firing, and the goal - a correct and durable fastener - will be achieved on the first try.

Most main criterion choice is, perhaps, price and purpose. For rapid-fire work, a pneumatic version is still required, but for infrequent household functions, a manual, inexpensive machine will do.

Independent use

A furniture stapler, the instructions for which always detail how to work with it, is an excellent tool for implementing any creative ideas in the field of interior design and furniture decoration.

Having figured out how to use this device, the furniture owner has unlimited possibilities to decorate your set or individual interior items at your own discretion.

So, we found out how to use a furniture stapler.

11 Weird Signs That You're Good in Bed Do you also want to believe that you please your romantic partner in bed? At least you don't want to blush and apologize.

20 photos of cats taken at the right moment Cats - amazing creatures, and perhaps everyone knows about this. They are also incredibly photogenic and always know how to find themselves in right time in rules

How to look younger: the best haircuts for those over 30, 40, 50, 60 Girls in their 20s don’t worry about the shape and length of their hair. It seems that youth is created for experiments with appearance and daring curls. However, already last.

What does your nose shape say about your personality? Many experts believe that you can tell a lot about a person's personality by looking at their nose. Therefore, when you first meet, pay attention to the stranger’s nose.

15 Cancer Symptoms Women Most Often Ignore Many signs of cancer are similar to symptoms of other diseases or conditions, which is why they are often ignored. Pay attention to your body. If you notice.

Contrary to all stereotypes: a girl with a rare genetic disorder conquers the fashion world. This girl's name is Melanie Gaydos, and she burst into the fashion world quickly, shocking, inspiring and destroying stupid stereotypes.

How to choose, operate and repair a furniture stapler

Types of furniture staplers

Types of staplers according to the type of force applied:

electric. There can be two types:

• battery-powered They are convenient because they are more powerful than mechanical ones and do not require an electrical cable. But due to the presence of a battery, weight and cost increase. And the battery life is limited by the amount of equipment driven in;
• with network connection. There is no dying battery, but there is a cable that you have to carry everywhere. Or connect to an extension cord;

pneumatic. The most powerful staplers. They operate using compressed air pressure. They have a hose for connecting to the compressor, and sometimes an electrical cable. Therefore inconvenient for household use. They are used in production and construction. They have a high cost.

Mechanical staplers are:

• with a coil spring. Has a weak shot. Allows you to work only with soft wood. Gives noticeable feedback to the hand. Resource up to 12,000 shots;

Coil spring stapler

with spring. Has less recoil. You need to put in less effort to work. The blow is stronger. Resource up to 75,000 shots.

Stapler with spring

• household These are mechanical and cheap low-power models of electric staplers;
• professional. These include more powerful electric and pneumatic tools.

Types of staplers by type of equipment:

• staplers. Used for household work;
• nailers. Used for professional and household activities. Work with large staples and nails. The length of the equipment is more than 12 mm;
• universal. Can work with flat and round staples, nails and pins.

For optimal choice stapler you need to solve the following problems for yourself:

• frequency of use of the tool: every day or from time to time;
• places of use: indoors, outdoors. Is there electricity there?
• Do you need precision driving of equipment;
• materials you plan to work with.

Depending on the purpose and working conditions, choose the type of stapler:

• for infrequent work with non-solid materials, a mechanical stapler is suitable;
• If you don't need precision in installing staples and have the ability to swing, then consider choosing an impact stapler. He's light. Attached to the mounting belt;
• for a large amount of work in places where mobility is needed, take a closer look at a cordless tool;
• if you work indoors with an outlet and don’t want to overpay for the battery, buy a stapler with a mains connection;
• If you need a stationary powerful device, don’t hesitate to take a pneumatic tool.

What characteristics to look for when choosing a stapler:

• presence of impact force regulator. A mechanical tool has two types of regulation: minimum and maximum or smooth adjustment. Electric has up to 6 modes. The setting is made using a software switch. How thinner material, the lower the impact force, otherwise dents will form;
• Double punch. Only electric staplers have it. For hard materials Large equipment is used that will not clog immediately. The double strike mechanism itself determines this and works a second time. If there is no such mechanism, then you will not immediately see that the nail heads are not completely hammered in;
• removing fasteners using a stapler. If this function is available, then to remove poorly driven equipment you will not have to do it manually or with a nail puller;
• body material. Structural steel staplers weigh more than plastic ones;
• rubber inserts on the handle. Their presence reduces the recoil of the tool, and the hand gets less tired;
• battery type:
  • nickel-cadmium suitable for low temperatures. But they have a memory effect, so they discharge quickly. They are used in inexpensive models;
  • lithium-ion. They hold a charge longer, but are less resistant to mechanical stress;
  • nickel metal hydride. Lightweight and have a long charge life;
• number of blows. The operating time of battery staplers depends on this characteristic;
• tool power. The number of beats per minute depends on it. With increasing power, the speed of the device increases;
• type of fastener. Choose a stapler with fasteners that suit your needs.

Selecting staples for a stapler

When purchasing staples, you should know which staples will fit your stapler. The type of equipment is indicated on the packaging, in the instructions and on the tool body. Staples have characteristics that must be taken into account when choosing:

• form. It can be U-shaped or semicircular. The latter is used for cable installation;

type of sharpening of ends:

• sharpened. Hammering such staples requires less effort;
• unsharpened. They jam more often and do not always clog completely;

equipment size. Nails and staples for staplers are divided into types and designated by number. Each type has its own dimensions:

• height H;
• width L;
• thickness W.

  The most common consumable is U-shaped brackets marked “Type 53”. They have found their application in upholstering furniture with textile materials and in joining products made of wood, plywood, chipboard and hardboard. Type 140 staples are in second place in demand. They are shorter and thicker. Due to the increased contact area with the material being joined, the likelihood of material rupture at the point of attachment to the base is reduced. Therefore, they are convenient when working with thin parts: fabrics, PVC film, as well as with wood, plywood, chipboard and hardboard. There are two types of semicircular staples.