If you have a desktop computer, then in the apartment, along with the obligatory pieces of furniture, there must be a special design tablethat allows you to place on it full set personal PC equipment. Moreover, very often it is not always possible to purchase a table that is ready for use, since many of the proposed models simply do not fit into the atmosphere of a particular apartment. The easiest way out of this situation is self assembly a desktop for a PC, made taking into account the characteristics of the space allotted for it. But before you make a computer desk with your own hands, you definitely need to familiarize yourself with the known options for these prefabricated structures, as well as with the features of their manufacture.

Design choice

All variety famous models computer desks operated in domestic conditions can be reduced to the following three types:

• corner;
• with a direct arrangement of a table-top;
• combined.

In the case of self-manufacturing of the table, the choice of the option suitable for you should be made taking into account the following requirements:

• ergonomics;
• the right choice of location, taking into account the quality natural light, depending on the location of window openings;
• availability of raw materials and ease of manufacture.

The first of these requirements means the creation of conditions that ensure the convenience of using the computer environment (mouse, keyboard, system unit and monitor). The possibility of their implementation should be provided for by the very design of the future product.

As for the choice of a place for a computer desk, here, first of all, the protection of the display screen from direct solar radiation, which can lead to burnout (fading) of its cells, and it is very inconvenient to work in such lighting. That is why the stand with the display, which is part of the product, should be positioned in such a way that the light from the sun does not fall directly on it, regardless of the orientation of the windows in the room.

Choosing a workplace low level illumination (windows are located on the north side, for example) is also undesirable, since it complicates the work with paper documentation and in this case additional lighting will be needed even during the day.

The most convenient option is the western or northwestern location of the windows in the room allotted for a PC. The choice of a specific desktop option (angular, straight or combined) depends on a number of factors that will be discussed below.

A feature of corner structures that occupy a minimum of space in the room is its compactness and the ability to organically fit into spaces limited in area. In addition, such tables are cheaper in terms of total material costs and easier to manufacture than all other models and therefore can be easily made even by a beginner in plumbing.

deficit usable area in such a structure can be compensated by an increase in its number of storeys, i.e. due to the manufacture of an additional retractable panel for the keyboard and a separate shelf for speakers. In a simplified version of such a product, the system unit is installed directly on the floor of the room (under the table).

Full straight table

The difference between a direct computer desk and a regular desk is that its individual sizes and shapes are adjusted to the requirements of ergonomics. Moreover, when organizing free space you can choose any depth of zoning that is convenient for you. In other words, this design allows you to implement a variety of options for the location of equipment, ranging from lead separate place under the display on the countertop and ending with a complex multi-level organization that allows you to place everything you need for professional work.

Materials for the manufacture of such a table will require approximately twice as much as for the arrangement of a corner structure. In addition, its self-assembly will require the performer to have carpentry skills related to processing various kinds wood material.

The combined table combines the advantages of computer and simple desk and ideal for professional work at home. However, you will need much more materials for the manufacture of such a table (by about 30–40%), since the manufacture of complex structural elements is associated with the formation of a large amount of waste. In addition, for the preliminary sawing of these elements, carried out immediately before their assembly, you will need a special cutting tool ( electric jigsaw or manual cutter used to select curly grooves).

The simplest and most affordable for self-manufacturing is the angular design, which allows, with a minimum of material and physical costs, to provide the required ergonomics and ease of placing the table within small room. It is this option that we will consider in the future.

Manufacturing procedure

For the manufacture of a corner table, a dense laminated board (chipboard) is usually used, which provides the required reliability and durability of the structure assembled on its basis.

Frame manufacturing

To make it, you will need the following source materials and tools:

• chipboard blanks;
• jigsaw and screwdriver;
• a small sketch with instructions on the dimensions of the structural elements;
• pencil and ruler;
• aluminum corners;
• wood glue.

The assembly of the frame base is carried out in the following sequence:

1. First of all, according to the sketch, all the main blanks from chipboard are cut out, used to decorate the two rear walls, sidewalls and the tabletop itself.
2. Then they are directly assembled, for which you will need the previously prepared corners and small wood screws (in order to avoid splitting the plate, their length should not exceed 1.5 cm).
3. During the assembly process, first of all, the tabletop is fixed on the extreme sidewalls, and only after that are mounted rear walls giving it the necessary rigidity.
4. After the supporting frame of the table is assembled, it will be possible to proceed to the installation of intermediate partitions, through which several working compartments are made out (for the system unit, keyboard, as well as for placing literature, documents, etc.).

Mounting Features

In the process of manufacturing a computer desk, we recommend that you pay attention to the following subtleties of assembly operations regarding the design of fasteners:

For fastening, it is best to use confirmations, but you will also need to purchase a special drill for them. If the design is simple, then you can mount with self-tapping screws.

1. Before screwing the self-tapping screw into the slab, first a hole is prepared at the attachment point with a thin drill (to a depth corresponding to the length of the self-tapping screw).
2. To increase the strength of the structure and the convenience of its assembly, individual attachment points can be reinforced by pre-treatment with a special adhesive composition. In this case, the adhesive can be applied both to the area where the self-tapping screw is screwed in (directly into the hole), and to the contact areas of the joined workpieces.
3. When screwing in self-tapping screws, the screwdriver must operate in low speed mode; at the same time, it is important not to overdo it with tightening the mount (which is why it is most convenient to use special models of devices equipped with so-called ratchets for these purposes).

Installation of the retractable panel under the keyboard begins with fixing on the adjacent side racks metal profiles used as guides. (They are usually installed about 20 cm below the level of the countertop).

On the panel itself, small rotating rollers are attached, through which it moves along with the keyboard.

Upon completion of all the procedures described above, the resulting structure is necessarily tested for strength, after which it will be possible to proceed to placing the entire set of items from the computer environment on it.

Video

See how you can make a computer table from chipboard scraps with your own hands:

An interesting solution is a computer desk transformer:

Photo

Computer desk today there is in almost every home - this is an indisputable fact. This is not surprising, because the computer has long been considered a luxury and modern man spends a lot of time with him. Therefore, the table on which the computer is located should be as comfortable as possible.

Of course, the current variety of furniture allows you to choose the desired model. But a high-quality computer desk made of wood is not cheap and not everyone has the opportunity to purchase it.

There is a wonderful solution to this problem - to make a computer desk yourself.

The main thing is to start...

The question "how to make a computer desk with your own hands" can sound intimidating for people who have no experience. Really nothing complicated this process does not represent. The first step is to properly organize it. For this you need:

Determine the list of elements that will be located on the table - its size and design directly depend on this. Standard set - monitor, mouse, keyboard and system unit. Additionally, speakers, a microphone, a printer, etc. can be placed on the table.

Select the material from which the table will be made. Most often, chipboard is chosen for this purpose, less often - plastic or MDF.

Decide on the location of the computer desk. It will depend on this whether you need a regular straight or corner computer desk.

You can also make a combined table, but this idea will be more difficult to implement. When choosing a place, it is necessary to take into account the presence of sockets, the proximity of heating, the angle of incidence of light.

Determine the dimensions of the future table. A small computer desk is tidy, but it's more suitable for spending time on the Internet. But for work it is better to give preference to more solid table sizes.

When all these points are considered, and decisions are weighed, you can begin to draft a future product.

Computer Desk Design

The fundamental stage in the design of a computer desk is the choice of the most suitable design. At the same time, it is necessary to pay attention to factors such as:

• practicality;
• convenience;
• functionality;
• appearance.

Having decided on your preferences, you need to make a sketch of the future computer desk. It is not necessary to have special artistic skills for this. The main thing is to think over all the details and give the picture a complete look.

According to the finished sketch, it is already possible to create a detailed drawing, indicating specific dimensions. If this task seems impossible, you can use ready-made drawings of computer tables found on the Internet, improving them according to your wishes.

What materials are needed?

After the drawings of the computer desk have already been brought to perfection, you can begin to determine the materials necessary for work, such as:

• the basis from which the table will actually be made;
• fixing materials;
• tubes, handles, wheels and other fittings (depending on the complexity of the design).

Mounting materials, and the main material, it is better to take with a small margin, since during assembly it may be necessary to strengthen the table additionally. Saving on the quality of materials is also not worth it, it is important to choose the best value for money.

Pros and cons of creating a computer desk on your own

The idea of ​​making a computer desk yourself has a lot of advantages, such as:

You can make a product of the required length, width and height, which is ideal for a particular room. Factory furniture usually has standard sizes, the placement of which is often difficult. Making custom-made furniture is not a cheap pleasure.

The design of a do-it-yourself computer desk will fully comply with individual requirements. It will have right amount shelves, drawers, its shape and height will be as comfortable as possible to work behind it.

A hand-made computer desk will turn out to be cheaper than purchasing a finished piece of furniture. The cost of the factory table includes not only the price Supplies, and wage workers, rent of premises, mark-up of the store and many other factors.

Independent selection of accessories and parts for assembling the table. Quite often, furniture manufacturers save on these little things, which, as a result, has a deplorable effect on the quality of the finished table. Sometimes the quality is so bad that even an inexperienced person can see it from the photo of the computer desk.

At first glance, making your own computer desk may seem like an impossible task. But this process is very exciting and creative, so it is likely that even a small DIY computer desk can be an incentive to create other, more complex and intricate furniture.

DIY computer desk photo

With the ubiquity of computers, there was a need for tables on which a monitor, a system unit, a keyboard and various office equipment could normally be placed.

Therefore, in our article we will consider the question of how to make a computer desk yourself. This task is quite feasible for ordinary person having little knowledge and skills in carpentry.

Having done computer table with your own hands, you will not only save money, but also pick up ideal dimensions for your premises, and also get aesthetic pleasure from the work done.

In contact with

classmates

Types of computer tables

There is enough a large number of types of computer tables and its varieties - a table for a laptop, which has a much simpler device and smaller dimensions.

1. Computer table rectangular shape, which will easily fit into any interior. It is usually equipped retractable table top under the keyboard and bedside table under the system unit.
2. Folding tables. Designed for people using a laptop. Very convenient portable designs made of plastic and metal.
3. Corner computer desk. If you have a free corner in the room, then it's time to put a corner computer desk there. This way you save space, and besides, it looks more compact than it really is.
4. U-shaped computer table will allow you to feel like in a study, thanks to its shape and, in addition, it can accommodate almost any additional devices. The main disadvantage is the large footprint.
5. Semicircular table stands out for its design among other designs and the ability to place all the additional attributes in it. But there is a drawback, like the previous option - this is a fairly large space occupied.

Laptop table

When buying a laptop, users have a standard problem that can bring a lot of trouble. When working for a long time behind this device, all parts of the body begin to numb. To avoid this, special mini tables are made for laptops, which are much simpler in design than computer tables, but the price for them is sometimes very “biting”. Therefore, a do-it-yourself laptop table can be a very convenient way out.

Table designs

There are several basic table designs, which we will discuss below.

1. The most simple design consists of wooden tabletop, usually made of beech, and two legs, which are two boards. The beech board is sanded fine and covered with a double layer of varnish.

1. A table with folding legs is more convenient to use, as it can be folded after work, and it will take up minimal space in your apartment.
2. A variation of the second design, but with an addition in the form of a cutout for a mug. This table is very convenient for watching movies in the supine position.
3. Another option is a table with folding legs, a place for a mug and two armrests. His photo is shown below. This is a more complex design, which, nevertheless, does not present great difficulties in manufacturing.

At independent production these products it is recommended to use a beech board, 1.8-2 mm thick. In this case, the table will last enough long term. As you can see, all these species do not represent too much complex structures and can be made by a person without special skills and knowledge in carpentry.

Tools

Let's see what tool you might need to make homemade table for a laptop.

1. Hacksaw, preferably for metal. Using cutting tool wood, you will have to spend extra effort and time to process the edges.
2. and a drill to it, of small diameter.
3. Measuring tool (ruler, tape measure and possibly a square).
4. Pencil.
5. Fine-grained sandpaper for processing countertops.

Instructions for making a computer desk

The simplest version of the table will look like this. A tabletop that combines legs, which are two boards.

Note!

All these details can be cut out of the old unnecessary furniture and then such a product will cost you almost free of charge.

Everyone chooses the dimensions of the parts for themselves, but, for example, for a 15-16-inch laptop, the dimensions of the table top can be 60 * 28 cm.

The sidewalls for such a table are made bevelled and the length of this very beveled side should be 28 cm. This side of the leg is attached to the tabletop. The most convenient slope for such a table is when the back of the leg rises by 29 cm, and the front by 21 cm. This slope will be the most optimal for working in a lying and reclining position.

Sawing table parts

Computer desk

To make a computer table with your own hands, you need to make a lot more effort than making a table for a laptop. The main task in this case will be to make a table “for yourself”, because the store version may not be suitable for your complexion at all. Before you start making a table, you need to decide on its model. A fairly common model looks like this.

The computer is located on the table, the system unit is on the side under the table on a separate stand. Also, under the table on a stand, only in the center, there will be a printer and a place for disks and documentation, and the keyboard and mouse will be located on a pull-out shelf under the computer.

Detail drawing

Computer desk dimensions

After you have decided on the model, you need to draw up a drawing with dimensions.

The main size of any table, including a computer one, is its height. For a person of average height, it usually varies between 700-750 mm. For greater convenience in use, legs with adjustable height can be provided. This will be especially convenient if the table is intended for children who tend to grow. Then the legs unscrewed in height will not allow to spoil his posture. The height of the printer shelf must be at least 20 cm, in which case you can also store discs in a standing position on it.

DIY computer table

Countertop manufacturing

The next step is to make the table top. Moreover, its size should not be too small and at the same time not be infinite. Everything should be compactly placed on it and, moreover, created as much as possible. comfortable conditions for work. The standard dimensions of the countertop vary between 1-1.3 m, and the depth can be about 60 cm.

Note!

For greater convenience, it is necessary to provide a side at the back of the table.

This will prevent objects from falling behind the table, and its height is sufficient no more than 5 cm.

Shutdown

The size of the pull-out shelf will be only slightly smaller than the countertop, and the depth must be provided with a size of 40 cm. The final step when self-manufacturing computer desk, there will be a shelf for the system unit. The height from the floor level may not exceed 10-15 cm, but the width must be provided for at least 25 cm, so that there is the necessary distance between the wall of the shelf and the system unit for the normal operation of the computer. Thus, fulfilling all these requirements, it is possible without special efforts make a comfortable table for your computer. Well, a visual aid in the manufacture of such a table can be obtained by watching the video below.

DIY computer desk video:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos for publication on a topic?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Making a computer desk with your own hands is not so difficult, and as a result you will get irreplaceable furniture, because computers are in every home today, and it is much more convenient to use furniture specially designed for this instead of the usual one.

Today on the market you can find a wide variety of computer tables - the transformer table and corner table, because they are not only comfortable, but also look original.

But, best of all, you can make almost any model of the table you like by yourself, after selecting it from the photo.

In the article you will learn how to make a computer desk, what tools you will need for this and how to properly mount the parts so that the furniture will last you a long time.

Drawings are the first thing you need when creating a computer desk. You can take ready-made drawings, or create your own, suitable for the size of your room.

Drawings are needed not only to see what the design will look like, but also to calculate the amount of materials and the price that it will cost you to build a computer desk.

First of all, decide on the appearance and functional elements of the computer desk: do you need drawers, pull-out shelves, stands for things, etc.

The more there will be additional elements, the more difficult it will be to make the table, but the more functional it will be in the end.

You also need to correlate the size of the structure with the size of the chair or chair that will be used for sitting.

This is necessary so that the table does not turn out to be too low, or, conversely, high or simply uncomfortable.

You can take as a basis standard size any office chair, because they differ little from each other.

The shape of the computer desk is another important detail.

It can be the usual rectangular, angular, or you can make a transforming table (see photo), which can change shape depending on the need.

The last option is the most difficult to manufacture, but you can assemble it if you wish.

The optimal table height is about 700 mm for an adult, and 600-650 mm if the furniture is planned for a nursery.

If you are making shelves for a printer, scanner and other office equipment, then you need to first measure it and find out what size the final size of the shelves should be.

The size of the computer desk is also affected by its location - try to ensure that the place is properly lit, the chair can move freely, and in general there is enough room for movement.

The final scheme should reflect the size of all parts, as well as the thickness for the side walls and countertops.

A high-quality drawing is a guarantee that you can easily and quickly cut the material and make details correct form and size, which greatly simplifies their installation and connection with each other.

The drawing should also reflect the amount of detail - look at the photo for an example of a diagram before you start creating your own.

After the drawing is ready, prepare the tools that you will need for further work.

Most often, chipboard is chosen as the material for the table, because. it is the most economical, and at the same time high-quality and durable.

In addition to chipboard, you can use natural wood or MDF, but then making the table will be more expensive.

In addition to wood, you will need the following tools:

• jigsaw;
• hacksaw;
• grinding machine;
• screwdriver;
• drill;
• roulette;
• chisel;
• square.

As you can see, there is nothing specific here, and, most likely, you can find these tools at home or in the garage.

Table manufacturing and installation

Do-it-yourself corner computer desk, a transforming table, as well as a regular rectangular table done almost the same.

To make the simplest design option, you will need chipboard, the thickness of which is not less than 16 mm.

They begin work on assembling a table of any type with the selection of parts that will fix the structure on the sides.

Guides are screwed onto the boards, which are needed if you want to make drawers and shelves for your computer desk. Then the side parts are assembled on the dowels.

To make the fasteners work better and fix the parts as much as possible, add PVA glue to the nests, or insert wooden planks there. The walls themselves are fastened with self-tapping screws.

The following parts must be assembled using parts to create drawers. For them, it is better to choose chipboard with a thickness less than the rest of the table - about 10 mm.

Installing the boxes Special attention pay attention to the corners: they should be straight so that the drawers of the table slide out and slide in easily. Lubricate the PVA sockets, and after that you can install dowels.

Then you need to paste edging tape side cuts, so that it lies tightly, you need to walk along the tape with a preheated iron.

But before that, put a sheet of paper on top, otherwise the surface may become covered with bubbles.

If you see that the tape is wide and extends beyond the edge, then cut off the edge with scissors, but do it carefully so as not to damage the coating.

So that the shelf can easily move along the guides, on its outer and inner side you need to glue wooden planks, the size of which matches the part.

If the elements do not match, then the shelf will jam, so pay special attention to this moment.

Look at the view of how the shelves for the computer desk are assembled - it will help you do the job better.

The tabletop is the last component of a computer desk. Before starting its installation, you need to make markings on the chipboard, noting the places where the countertop will be attached to the supporting pedestals.

In these places, you need to drill non-through holes, having previously installed a limiter that will allow you to control the depth of the hole.

The cabinets are installed on the countertop so that the holes are directed upwards. They will be connected by stiffeners, which will make the structure as stable as possible.

Wires will also be placed here, which will make the computer desk more convenient to use. As supporting elements, you can also use parts of the corrugated pipe, which will become a support.

The next steps are to fix the plinths on the pedestals, then turn the structure over and install the hinges on which the side door will be held.

You need to fix the structure with screeds so that it can be easily disassembled and mobile - if desired, you can easily move the table to another place.

It is best to make a monitor stand on the table top: for this, first make a frame (small wooden round bars are suitable for it) and fix it with glue and dowels.

You can also purchase a ready-made stand by fixing it with self-tapping screws.

The last step is the processing of the chipboard table. It is best to varnish the surface, but you can also paint it in the color you want to match the furniture. general style your premises.

If you decide to paint the structure, then first treat it with a primer. After applying the coating (lacquer or paint), it will be possible to use the chipboard table in 2-3 days, when the coating dries.

Computer table-transformer is done in the same way regular tables, ordinary chipboard is also suitable for the material, but there is room for creativity: for example, a transforming table can be made with a turntable, or it can increase in size, and then you can use it not just as a place to install a computer, but also a full-fledged canvas to receive guests.

To do this, you can make the monitor stand removable, or completely abandon it.

Another unusual and popular option is to hide a transforming computer desk in a false cabinet, which you can also assemble yourself.

This is very convenient for small apartments, because in this way you save a lot of space.

In addition to the transforming table, in such a cabinet you can install shelves for books or documents - then everything will always be at hand at your workplace.

Finally, classic version- when the transforming table has a sliding panel, which, if necessary, increases the working space.

This is relevant, for example, if there are several children in your family, and they need to do their homework at the same time.

Other options for how a transforming computer table may look, look at the photo.

You can combine several, or come up with your own. original version, with the necessary skills and supporting videos, you can make almost any design model.

With the advent of personal computers in our lives, it has become important to make a corner computer desk with your own hands. V Lately Corner desks are gaining more and more popularity. By making a computer desk with your own hands, you can not only get furniture with individual design, but also significantly save your budget.

Homemade corner table will save space in the room and your budget.

Of course, you can buy such a table in the store, but there are people who prefer to do everything with their own hands.

How to start making a table

Decide on the size
You can look at the layout of objects on the table.

Before you make a corner computer desk, you need to decide on the shape of the table, its dimensions, design, and, possibly, some additional features. It is very important to clearly imagine its appearance, the materials used to create the table will depend on this.

Everything that may be needed in the process of work must be prepared in advance.

Now you need to draw up a project for the manufacture of a computer desk. When compiling it, it is necessary to take into account some parameters:

• the functions of the table, it is important to provide for such trifles as the number of drawers, as well as the need for a pull-out shelf for the keyboard and other shelves for office equipment;
• the height of the table, while it is very important for whom this table is made, if it is intended for an adult, then you need standard height, if for a child, then it is necessary to choose the right height, focusing on the growth of the child, do not forget about the size of the swivel chair;
• when planning additional shelves, you need to take into account the dimensions of office equipment and make shelves strictly for them;
• the size of the table should correspond to the room in which it will be located, taking into account the furniture already located here.

Before starting work, you need to make a sketch of the table with all sizes.

You can think over a place to store CDs in advance, for this you need to measure the width of a pre-purchased plastic insert for discs. Now you need to complete a drawing in which all the necessary elements are marked with an exact indication of all dimensions. This is necessary in order to subsequently use the material most rationally. The drawing must indicate the number and type of fasteners.

To make a computer desk with your own hands, you will need the following tools:

• rulers;
• end planer;
• ready-made plastic insert for discs;
• jigsaw;
• Screwdriver Set;
• Circular Saw;
• drill and a set of drills.

From materials for a computer desk, you will need:

List of materials for the manufacture of a computer table.

• pine boards needed to reinforce the product, optimum thickness there will be boards of 25 mm;
• for shelves, drawers and side walls, it is better to take an MDF board in the quantity required according to the drawing;
• screws for fasteners, about 130 pcs.;
• guides for shelves and drawers, their number will depend on the number of these elements;
• plastic ties for corners;
• end edge and sanding paper for processing the edges of drawers and shelves;
• varnish or primer for finishing.

Making a computer desk with your own hands is not difficult, but you need to be very careful when sizing on the drawings and when cutting individual elements from a large canvas.

Assembling a table with drawers

After all the necessary elements are cut out, you can begin to assemble the computer desk. You need to start the assembly from the side elements. At the same stage, we fix the guides under the pull-out shelf and under the drawers. This must be done very accurately in order to avoid skewing the boxes during further use. Then all the side walls are connected with dowels. In order to make the mount more durable, you can add PVA glue to the holes. Further, all the walls are fixed with self-tapping screws.

The edges that are visible are treated with an edge tape, such a tape is attached using a conventional hot iron, you can iron it through thin fabric or plain paper.

Tools for making a table: drill, jigsaw, screwdriver, screwdrivers, pliers.

A computer desk can be installed depending on a pre-selected design. You can buy special metal round feet with a plastic base to avoid scratches on the floor or on initial stage, when designing, provide for the main emphasis on the side pedestals installed on the above metal legs or simply on additional slats made of material similar to the side posts.

After all the edges of the computer table are processed, you need to fix the table top. As a rule, it is simply fixed on the dowels, after adding PVA glue to the holes. Holes for them are prepared in advance, after turning the table top over, using a drill. It is best to use a limiter in this case, since the drilling depth is small and can be damaged by negligence front side countertops.

Now we install the board intended for the keyboard in the guides and insert the drawers. Let's check if everything works.

If, according to your project, the monitor will be installed not on a tabletop, but on a separate shelf, it is best to mount it on a special metal stand, firstly, it is very stylish, and secondly, it is reliable.

Place for the system unit

If you are going to use at this computer desk Personal Computer, and not a laptop, it is necessary to provide a place for the system unit. A special stand is best suited for these purposes. It is not difficult to make it, but there will be a lot of convenience from it. You do not have to clutter up your table with unnecessary elements, while the system unit will be very mobile, there will be no rigid binding to the table. You will need a base cut to the size of the system unit, as well as two side rails. You can attach beautiful metal legs with a plastic base to the base or install wheels instead.

Making a table with your own hands is not too difficult and very exciting. But you need to approach it responsibly. The main thing is to provide for all the little things at the initial stage, as well as to cut out individual elements very accurately. And then the table made with your own hands will exceed all your expectations.