If various defects appear on the tension panel, its aesthetic appeal is significantly reduced. Especially spoil appearance covering damage in the form of cuts, punctures and holes. But in some cases, defects can be dealt with and the beauty of the stretch ceiling can be restored. Depending on the type of tension cloth, they are used different methods fix the problem. We'll tell you how the repairs are going. suspended ceilings after the cut.

Causes of cuts

A cut in a film or fabric stretch covering appears for various reasons. In most cases, repair of a cut in a suspended ceiling is required after installing window cornices. Installation of eaves pipes with sharp edges must be done very carefully. It is advisable to wrap the ends of the pipes soft cloth during their installation.

Causes of cuts in a stretch ceiling:

1. Restoring a torn tension fabric will be required after careless children's games. Therefore, in the nursery it is better to use fabric ceilings, which are more resistant to such damage.
2. A hole, like a cut, may appear on PVC ceilings as a result of weld divergence. This happens if the connection is made poorly.
3. If, during the installation of a suspended ceiling covering, it was over-tensioned, the material may burst at the point where the harpoon is welded around the perimeter of the canvas. At first glance, it seems that the panel has jumped out of the baguette, but in fact it turns out that this is a defect, like a cut.

Non-repairable cases

If a cut occurs on a suspended ceiling, the master knows what to do. In some cases, the defect can be fixed on your own (the instructions below will help you with this). But there are also cases when no methods will help get rid of the defect. In such a situation, you will only need to install a new stretch ceiling.

The following cases are considered beyond repair:

• it is impossible to disguise the defect due to its large dimensions;
• the cut is located in such a place that even after repair it will be clearly visible (there is no way to fill the defect into a baguette or install a new ceiling lamp);
• If the weld seam breaks, the panel will have to be dismantled and a new one installed.

Methods for eliminating cuts on stretch ceilings

Prices for repairing suspended ceilings range from $30-50 and depend on the complexity of the work and the extent of the damage. But in some cases, you can repair suspended ceilings after a cut with your own hands. Follow the instructions below exactly. But before you seal the suspended ceiling after a cut, determine the type of panel, because the choice of repair method depends on this.

Step-by-step instructions for repairing a PVC ceiling

The choice of how to repair a stretch ceiling with a cut with your own hands is directly related to the location of the defect:

1. If the defect is located no further than 15 centimeters from room walls, then the canvas can be partially pulled to tuck problem area into a baguette. To do this, the panel in this place is released from the fastening profile. Using scissors, trim part of the covering to the area with the hole. Next, a cord is applied to the new edge, the material is wrapped around the cord and glued. It turns out to be a homemade harpoon for fixing the canvas in a baguette. After this, the panel is stretched and tucked into the wall profile using a spatula with rounded corners.

Important! If the hole is located at a greater distance from the wall, then pulling the film will not work. Otherwise, you risk breaking it completely.

1. To hide the cut in the central part, install in this location lighting fixture or ventilation grille. Before installing the lamp, a plastic protective ring is glued to the ceiling, which protects the hole from expansion. After this, the device is installed.
2. Large defects in the central part cannot be repaired and require the installation of a new coating. But still something can be done. Glue the film applique to the ceiling. It will hide the hole and diversify the interior.
3. If the ceiling just jumped out of the baguette, then it is tucked back into the mounting profile, having previously sealed the harpoon with a cord or replacing the profile itself.

Large holes in the central part of the ceiling should not be repaired yourself. IN warranty period work is performed free of charge. It is worth entrusting this task to professionals for the reason that in the event of unauthorized intervention in the structure, the installation company’s warranty will be void. Before the technician arrives, cover the problem area with tape to prevent the hole from expanding.

Step-by-step instructions for repairing a fabric ceiling

Fabric seamless coatings also subject to repair if they are cut:

1. Small holes simply sew it up with nylon threads to match the color of the material. To further hide the location of the defect, the surface is painted. water-based paint, after all fabric coverings can withstand up to five paintings.
2. Significant damage on fabric ceiling sealed using a patch. After installation of the coating, there are usually scraps of material remaining (allowances for threading into the fastening profile). It's good if you saved them. You can cut a patch from them suitable color and textures. The dimensions of the patch should be slightly larger than the dimensions of the hole. This patch is glued to the back of the ceiling using cyanoacrylic adhesive. The defect site is carefully straightened and smoothed.

Advice! Instead of scraps of woven fabric, you can use another fabric. To hide the discrepancy in the color of the patch and the main coating, the ceiling after repair is painted with water-based emulsion.

Tools for repairing fabric and PVC ceilings

During the repair work to eliminate holes in the tension surface you may need some of the tools below:

• You will have to use a hairdryer if you need to tighten the fabric more and tuck the defect into the baguette;
• scissors;
• sewing needle;
• spatula with rounded corners;
• ruler for measuring the distance to the wall;
• roller on a long handle;
• paint tray;
• ladder.

Materials and adhesives for repairing cuts in suspended ceilings

Before you glue the suspended ceiling, stock up on the following: glue mixtures and available materials:

• glue for PVC suspended ceilings;
• dense cord to strengthen the harpoon;
• woven patch;
• nylon threads;
• water-based paint;
• adhesive composition based on cyanoacrylic.

Cut repair video

If you don’t know how to repair a stretch ceiling with a cut, video instructions will help you figure it out:

Ways to decorate a cut

Now you know how to repair a cut on a stretch ceiling. In some cases, you can not eliminate the defect using radical methods, but try to decorate it.

The following methods are used for this:

1. If the problem area is located close to the chandelier, you can hide it behind a decorative base made of polyurethane stucco or mirrors.
2. Another way to decorate is coloring. ceiling surface. But this can only be done with fabric tension coverings.
3. Small defects on a film product are decorated with an applique of thin colored film in the form of butterflies, flowers, geometric shapes and other images. To make the decor look harmonious, similar figures of smaller or larger sizes are glued in other places.

As you can see, small cuts on the tension surface are not a reason to completely replace the ceiling covering. If you have certain knowledge and skills, you can easily repair the ceiling. In some situations you will need the help of professionals. But in any case, it will cost less than installing a new product.

Today, few will dispute the practicality and design appeal ceiling structure, consisting of a panel and a frame. However, such finishing requires careful handling, which cannot be said when, for example, there are small children in the house. They strive to throw the toy higher and can pierce the covering with it. Fortunately, even a person far from construction can repair minor defects.

Before you begin repairing suspended ceilings after a cut, it should be noted that the coating can be made of two types of material: PVC or fabric. The advantages and disadvantages of each of them will not be discussed here; we will only point out that polyvinyl chloride finishes are more popular. This is due to the ease of maintenance and variety of colors. However, damaging the canvas from PVC is easier simple.

The most common causes of damage are the following:

• Sharp elements high furniture when rearranging it.
• Use of lighting electrical installations with a power of more than 60 W.
• Toys thrown up by children, as well as sparklers, crackers and Christmas tree decorations.
• Significant temperature changes in the room.
• Technological errors during the cutting or installation process.

Dilemma: do you repair suspended ceilings yourself after a cut or turn to the experts?

A simple test will help put an end to this issue. It is enough to take a few measurements:

1. The distance from the gap to the wall, if the result is more than 150 mm, you will most likely have to call in professionals.
2. The size of the defect itself - if it exceeds 150-180 mm, then you cannot do without outside help.

It is worth considering that big renovation suspended ceilings after cutting with your own hands requires an appropriate approach and equipment. Therefore, if you are unsure, it is better to turn to craftsmen who, at the initial stage, are able to determine the feasibility of restoration and its cost. The fact is that in certain cases it is easier to replace the canvas completely than to organize its restoration.

Below are the defects, the elimination of which is best left to specialists:

• Serious sagging of the ceiling covering.
• Tears along the seam of the fabric.
• Consequences of flooding.
• Destruction associated with exposure to low temperatures.
• Damage associated with deformations of the installation profile.
• Tears in the fabric exceeding 200 mm at a distance from the walls of more than 150 mm.

Minor flaws located in the immediate vicinity of the wall profile can be eliminated by stretching the canvas. However, again, it is unlikely that you will be able to solve this problem yourself without the help of specialists.

Warranty obligations, or what defects are eliminated by the contractor himself

Any customer has the right to use warranty service when defects ceiling decoration arose due to the use of low-quality material or violation installation technologies. Such cases include:

• Breakage of the baguette, weakening of the tension, as well as the appearance of tears in the panel due to these violations.
• Poor quality fabric with microscopic holes.
• Excessive tension, which leads to the appearance of tears in the corners and subsequent repair of suspended ceilings after the slightest cut or burn.
• Inadequate tension causes the panel to vibrate when opening doors or windows.

How to repair fabric-based ceiling trim?

To perform a small restoration operation, you need to purchase nylon threads of the appropriate color and acrylic or water-based paint. The incision is carefully sutured, and a patch is applied to the burn and sewn.

It is important to make the seams as even as possible, and in order to completely hide the traces of restoration, the area of ​​the work should be painted over. Eventually ceiling covering must acquire original appearance.

Installing the patch

When using a fabric patch, its color can be neglected, because after restoring the appearance, the canvas is usually repainted. Regular colorless glue is suitable for gluing. But top scores shows a special adhesive based on cyanoacrylate.

The patch installation process is simple and consists of the following transitions:

• Cut a piece of material to the appropriate size. It should have an allowance at the edges of 20-30 mm.
• Apply glue to the patch and attach it to the coating from the back side.
• Remove excess glue with a rag and smooth the fabric. Do not press the part too hard because this will cause the glue to stick out. front side finishing.
• After drying, paint the entire ceiling surface with spray paint.

How to repair PVC suspended ceilings with your own hands after a cut: main steps

Restoring such material is a more complex operation. The location of the defect plays a special role here. If it is located near the wall, then with a high probability it will be possible to tuck the canvas into the profile, having previously trimmed the damaged area. Thus, the original appearance of the finish will be preserved.


There are several methods for repairing stretch ceilings made of polyvinyl chloride after a cut with your own hands, restoring their strength:

• Minor damage near the wall can be restored using a 100 mm long piece of antenna cable. It is glued next to the damage parallel to the baguette, and the fixation field is heated with a hairdryer. In the process, the cable is pulled towards the wall to be tucked into the profile groove using, for example, a spatula. If the apartment has , then this fact should be taken into account and work carefully.
• A small burn or cut can be hidden by installing an additional spotlight. In the bathroom, even significant damage can be removed by installing a ventilation grille. However, it is important to note that such modifications require that the panel be in place installation work had a durable frame or thermoelements.
• If the damage is significantly removed from the wall, the defect is eliminated by gluing a patch or appliqué. In addition to film scraps, you will need tape and glue. A small gust is eliminated in the same way as in the case of fabric trim. Large cuts are first fixed with tape, preventing their further spread. The damage is subsequently sealed with an applique or patch.

Particular attention should be paid to the choice of adhesive for film coating. It should not destroy the PVC structure, otherwise stains cannot be avoided. Restoration experts recommend the ultra-strong adhesive Cosmofen.

To avoid repairing suspended ceilings of any type after a cut, it is enough to simple rules operation:

• Before you start cleaning, you need to remove all jewelry from your hand that could damage the finish.
• Do not use compositions that contain abrasive particles or acetone for cleaning.
• There is no need to put excessive pressure on the panel.
• For cleaning, it is better to use soft suede cloths or a sponge with a ten percent ammonia solution or window cleaner.

Stretch ceilings have many advantages, including ease of installation, moisture resistance, aesthetic appeal, and durability. However, they are not very resistant to cuts and punctures, and in such cases, immediate repair of suspended ceilings is required.

Causes of damage to suspended ceilings

If the installation of suspended ceilings is a matter purely for specialists, then in some cases you can handle their repairs yourself. But it is not always advisable to make repairs at all - tension fabrics are often easier to replace than to repair. It depends on the nature and extent of the damage.

Cuts and punctures

Despite the high strength, stretch fabric- it's just a film or thin layer fabrics that can be easily damaged by a sharp object. It could even be the corner of tall furniture being moved to another location.

A newly stretched ceiling is especially susceptible to such damage, so in the first days after installation it is advisable to let it “settle” and only then begin rearranging and other actions.

Sagging of material due to flooding

Most often, you have to repair the ceiling in the bathroom, toilet or kitchen, since these are the rooms that are most often flooded by neighbors living above.

The consequences depend on what kind of ceiling you have - fabric or film. And also on the temperature of the water accumulated under the material.

If it is very hot, then it will most likely not be possible to save the coating, even if it is made of PVC film, since under the influence high temperatures it stretches beyond repair.

And stains and stains may remain on fabric-based ceilings. In such cases, you will have to change them completely.

For reference. Complete replacement of the tension fabric is cheaper than the initial installation. Since only the canvas will have to be changed, leaving the hanging structure in place.

Tearing at the seam or tearing off the baguette

Such problems appear not through the fault of the owners of the ceiling and are covered by warranty cases.

The reason may be:

• Unqualified installation.
• Incorrect cutting or calculation(cm. ).
• Manufacturing defects.
• Use of low-quality materials.

If your ceiling has split along a seam or the molding has come away from the wall along with the fastening, do not repair the tension ceiling yourself - call a representative of the company that did the installation. She must correct the defect or completely replace the materials at her own expense.

Sagging from time to time and other defects

After several years of operation, the ceiling may sag, even if a constant temperature was maintained in the room and the surface was cleaned proper care. This most often happens when its area is very large.

At the same time, you can renovate the bathroom several times - the ceiling will only need to be washed. On small area the sagging is almost unnoticeable.

Nowadays home saunas have become very popular. If you install a tension fabric in them, then when the temperature rises, it will definitely sag. It may even fall completely if the edges that hold the film in the baguette melt.

The canvas of a film stretch ceiling can collapse for another reason - as a result of a drop in temperature to negative values. Therefore, it should not be installed in an unheated room. winter time in the country house or on the balcony.

Methods for repairing tensile structures

Elimination of cuts

Repairing cuts on fabric-based stretch ceilings is quite simple:

• They are carefully sewn up with color-matched nylon threads.

• If the cut is large, it can be sealed with a strip of glass wallpaper or fabric tape, pressing the edges of the patch tightly to the canvas.

After repair, if its traces are very noticeable, you can paint the entire surface of the ceiling with a spray gun.

If you cut the film, the area must be immediately sealed with tape or tape to prevent further tearing of the stretched fabric. This temporary measure will allow you to prepare everything necessary to repair the damage.

There are two ways to repair a suspended ceiling yourself, but they are only possible with small cuts up to 2 cm long. If they are larger, you will have to call specialists or change the canvas completely.

• If the tear occurs far from the edge of the film, you will have to put a patch on it. It is best to cut it out of a piece of the film from which the ceiling itself is made - usually installers leave it just in case. If there is no such film, use another one, making a contrasting application on the ceiling. Glue or transparent sealant is applied to the cut patch, after which the tape is removed from the cut. It needs to be held in a certain position for some time using a clean, dry cloth. Excess glue is removed immediately. Special stickers for decorating walls and furniture on a self-adhesive basis are also suitable for this. Sometimes after renovation the ceiling looks even better and more interesting than before.

Advice. Sometimes it is easier not to seal the cut, but to install a lamp, false hood or other decorative element. In this case, a special plastic ring is glued around the cut, inside which the film is cut out.

• If the cut is located close to the wall, you can try to retighten the canvas by removing the hole into the groove of the baguette. To do this you will need good glue. The instructions are clearly presented in the table:

Image	Description
	The canvas is partially removed from the baguette and cut off from the harpoon, and then the damaged area is cut out of it using the most flat line possible.
	The harpoon is lubricated special glue, the edge of the canvas is pulled towards it and glued inside.
	This may cause small wrinkles to form, which will disappear after heating.
	Next, the canvas is heated with a heat gun or a hair dryer.
	And with the help of a spatula it is tucked back into the baguette.

Elimination of sagging

If you have a flood and the suspended ceiling is sagging, the repair will consist of dismantling the lamp, chandelier (see) or any other element built into the ceiling and releasing water through it.

If your ceiling does not have lamps or holes for exhaust hood, you will have to disconnect part of the canvas from the suspended structure. But it is better to entrust this to professionals.

The canvas or lamps should be returned to their place after the material has dried.

Sometimes, during a significant flood, the canvas can withstand the weight of the accumulated water, and the hanging structure may be torn out of a wall or ceiling. In this case, you cannot do without the participation of specialists.

Elimination of installation defects

As mentioned above, problems can arise if suspended ceilings were installed incorrectly - repairs in this case are the responsibility of the installer.

• If there is a tear along the seam, the fabric is completely changed.
• If a baguette breaks out of the wall, it is reinstalled using additional spacers, after which the canvas is stretched again. But before that, you need to establish the cause of the damage. If it lies in poor fasteners, then you can leave the original canvas. If the tearing occurred as a result of excessive tension, it means that the material was cut incorrectly and should be made a little larger.

Conclusion

If the rupture or cut was caused by your careless actions, and you decide to fix it yourself, be sure to watch the video in this article before getting started. If the case is under warranty, do not rush to carry out repairs yourself - the suspended ceilings in such a situation must be re-tightened by the installer.

Stretch ceilings are very often used as ceiling finishing, which have a lot of advantages - they look good, provide good sound insulation, protect the apartment from flooding from above and do not require special care. However, no matter how good they are tensile structures, they also have disadvantages, and the main one is the extremely low strength of the canvas.

Of course, a good canvas can withstand tension and pressure quite well, but the slightest touch with a sharp or angular object will leave a noticeable hole on the surface of the ceiling, which will expand over time. In such cases, the owners have a question about how to repair a cut on a suspended ceiling - and this is what will be discussed in this article.

Types of paintings

The fabric can be damaged by the mass different ways- for example, careless movements during the cleaning process, or during some kind of game. When determining how to repair a cut on a suspended ceiling, you need to take into account what kind of material was used as a canvas, so you will first have to understand all the materials suitable for these purposes.

All canvases are divided into two main types:

1. Fabric. This option is made of polyester fabrics that are impregnated with a special polymer composition. To make fabrics, synthetic fibers are used, slightly diluted with natural threads. The average thickness of this fabric is about 0.37 mm. However, in this article we're talking about First of all, about the strength of the material and the possibility of its repair. Fabric sheets are quite convenient in this regard - they practically do not stretch and have a porous structure, thanks to which it is quite easy to repair such material. Replacing the entire blade is only necessary if the cut size exceeds 30 cm.
2. PVC. This material is based on polyvinyl chloride fibers. With a relatively small thickness (from 0.17 to 0.22 mm), the material has good strength. It can withstand temperatures up to +100 degrees, and when this indicator is exceeded, it begins to melt. In the event of sudden and significant temperature changes, it may crack, as a result of which the strength of the canvas decreases. PVC fabric has good elasticity, allowing the material to be stretched if necessary. However, you should not overdo it with this - strong stretching and pressure on the film can lead to a change in its characteristics, and after repair it will be deformed.

Despite the similarity of composition and application, the materials presented have serious differences, which determine the repair methods suitable for each specific situation.

Causes of damage

As noted above, any fabric used for suspended ceilings initially has a fairly high strength - but it does not manifest itself at all when it comes to piercing and cutting influences. The biggest danger that a suspended ceiling can be exposed to is a common cut. Even a small cut in a stretch ceiling violates the integrity of the canvas and leads to complete deformation of the ceiling surface.

To understand how to eliminate a cut on a suspended ceiling, you need to handle it carefully, starting from the stage of its installation. However, during operation, care and understanding of the properties of the material are also required - for example, over the course of several days after installation, the material will adapt to new conditions, so you should refrain from any serious work in a room with a newly installed ceiling.

Most often, a cut on a stretch ceiling occurs for the following reasons:

• Errors were made during installation; low-quality material was used to install the ceiling, which, in addition, was also cut incorrectly;
• Careless rearrangement of large furniture - for example, a cabinet that has sharp edges that can damage the ceiling;
• It is strongly not recommended to install suspended ceilings in children's rooms - any active games will sooner or later lead to accidental damage to the canvas;
• Very often, the ceiling is damaged accidentally due to careless handling of sharp objects in the room - for example, during further renovation of a room, you can pierce the canvas with a screwdriver or cut it with a grinder.

There can be quite a few ways to damage the canvas, and as a result of such exposure you will definitely have to figure out how to repair a cut on a stretch ceiling.

Temporary ceiling sealing

To perform a temporary repair of a cut stretch ceiling, you need to prepare a set of materials and tools, which includes:

• Masking tape or fabric tape;
• Scissors, regular tape and a small piece of cable about 10 cm long;
• A patch made from the remains of linen;
• Nylon thread, needle, varnish and paint;
• Hairdryer and spatula.

This entire set is necessary for the initial, temporary sealing of a cut. The fact is that small cuts on the surface of the stretched fabric tend to gradually spread, so first of all you need to take measures to localize the damage so that further rupture of the stretch ceiling does not occur.

Small cuts on any fabric can be dealt with very simply - just connect the edges of the cut with tape. To close pinhole punctures no larger than 2 cm in size, you can even use regular glue. This option will not be a panacea - it is only suitable as a temporary solution, and in the future you will still have to carry out a full repair of the cut in the stretch ceiling with your own hands.

Repairing a cut film ceiling

The first thing you need to understand is how large the slot in the stretch ceiling is. This is very important point– if the size of the damage exceeds 15 cm, then the material can no longer be repaired and will have to be completely replaced. You also need to evaluate at what distance from the wall the cut is located - if it is no further than 20 cm, then you can try to pull the canvas and hide the damaged area in a baguette.

In the latter case, repairing suspended ceilings after a cut with your own hands will look like this:

• The antenna cable is glued directly over the cut;
• When the glue has hardened, the canvas needs to be heated with a hairdryer;
• The canvas is carefully pulled to the baguette and tucked into it using a spatula;
• Next, the material needs to be straightened and leveled so that it looks like new.

You also need to figure out what to do if you cut the suspended ceiling at a distance from the wall. Under such conditions, you will have to use more complex repair methods that require detailed consideration.

Applying a patch

To make the patch, a piece of the same fabric that was used in the ceiling itself is used. The dimensions of the workpiece should be a couple of centimeters larger than the dimensions of the damaged area. Such an amount of glue is applied to the patch so that its excess does not ultimately protrude out - it will be impossible to wipe it off from the surface of the ceiling, and the appearance of the structure will be ruined.

The patch is applied to the damaged area and pressed. There is no need for excessive effort during this operation - folds will appear. The glued patch should be carefully smoothed out after the glue has set a little so that the surface is as smooth as possible. At this point, the repair of the stretch ceiling cut can be completed, or you can go even further in the desire to return the ceiling to good decorative properties.

So, on the areas repaired using a patch, you can later apply a PVC application or some kind of design. Individual PVC flaps are quite suitable for use as patches - but you should always glue them not only over the cut, but also over entire sections of the canvas, so that separate places didn't stand out. The same goes for simple images.

Before removing a cut on a suspended ceiling, you need to select correct option glue. There are no special requirements for the glue used. By by and large, there are only two parameters - fastening quality and color. Most modern adhesive compositions have no color and perfectly hold the surfaces to be joined, so all such options are suitable for repairing suspended ceilings.

It is best to use the following types of glue:

• Universal glue – reliable, quite strong and durable;
• Specialized adhesive, which is divided into compositions for heavy, medium and light materials;
• Regular superglue.

Mounting a ring for a lamp

This method is only relevant for vinyl sheets. A special ring is glued to the damaged area, into which lamps are usually mounted. When the thermal ring is glued, a sheet is cut along its inner perimeter. If the damage is large enough, then nothing will have to be cut out.

When using this repair method, you need to take into account that the lamp will ultimately be mounted in the same way as any other lighting fixture on a suspended ceiling. Instead of lamps, you can use a fake ventilation grill or smoke detectors to disguise damage - they are installed in a similar way.

Repair of fabric stretch ceiling

It is much easier to work with fabric stretch ceilings, which is due to the fairly stable structure of the materials used. To decide on a repair method, you need to understand how extensive the damage is.

There are the following methods for repairing a cut on a fabric ceiling:

1. The first method involves using nylon threads of the appropriate color. Stepping back from the edge of the damage by at least 3 mm, you need to tighten the fabric. The finished seam must be treated with an acrylic-based sealant and a patch applied to this area, which will restore the texture of the fabric. After the sealant has completely cured, the repaired area can be painted or patterned.
2. On damage that has big sizes, the seam will be too noticeable, so it would be best to use a patch that is cut from fabric or glass wallpaper. The patch is glued to its place using glue. You need to glue the patch with inside canvas, and when installing the patch there is no need to put too much pressure on it so that the ceiling does not sag after the repair. In the future, it will be possible to cover the material with water-based paint - it will mask all traces of repairs.
3. At suitable conditions You can use a thermal ring for repairs. The technology for eliminating damage looks exactly the same as in the case of film ceilings.

Possible defects

In the vast majority of cases, incompetent repair work leads to new damage. Of course, even in the most difficult cases there are options for solving the problem, so you first need to assess how damaged the ceiling is.

There are a number of defects that cannot be dealt with:

• The fabric, which has completely come apart at the seams, will have to be completely re-stretched - gluing will not help in this case;
• If the ceiling is torn away from the wall, then the canvas will have to be re-stretched, and the structure of the stretch ceiling will have to be strengthened;
• If only one baguette comes off, then it can be carefully attached to its place without touching the canvas.

To ensure that the suspended ceiling is as reliable as possible, you should follow a number of recommendations when installing and repairing it:

1. To ensure that the patches stay in place better, the areas to be repaired must first be degreased. A special spray or mild detergent is suitable for these purposes.
2. You need to understand what to do with a cut on a suspended ceiling. Having noticed a cut, you must immediately take measures to prevent its expansion - for example, by securing the edges of the canvas with tape.
3. On a ceiling with photo printing, it makes sense to remove the cut only if it will not be noticeable after the repair. If the drawing is deformed as a result of repair work, then the most appropriate solution would be complete replacement canvases.
4. The air temperature in the room must correspond to the permissible temperature for the specific material (as a rule, temperatures from 0 to 50 degrees are quite comfortable for canvases).
5. If the room is damp, you will need to remove rust regularly. For cleaning the canvas, a flannel cloth and a glass cleaner that does not contain abrasives are best suited.
6. Spotlights, installed in a suspended ceiling, must have permissible power. Regular lamps with a power of up to 60 W and halogen lamps with a power of less than 35 W are suitable for fabric. Film canvas has a lower power threshold - incandescent lamps can have a power of no more than 40 W, and halogen lamps can have a power of up to 20 W.
7. In order for the repair to be of the highest quality, it would be best to contact professionals who will find and implement optimal solution Problems.

Conclusion

Repairing a stretch ceiling in case of a cut is a completely feasible task, accessible to self-execution. Before repairing a stretch ceiling from a cut, you need to assess the extent of the damage, take into account the characteristics of the fabric, and only then take appropriate measures to eliminate the problem. Proper execution Such work will allow you to restore the ceiling and return it to its original appearance.

The stretch ceiling is a thin PVC film, so the surface is easy to damage with a sharp object. Rough handling may result in cuts and punctures. In such cases, owners worry whether they will have to change the entire canvas. Fortunately, this is not necessary. In most cases, PVC film can be glued together. Let us consider in detail the most common situations and provide instructions on how to repair different kinds damage to the canvas.

What happens if you pierce a suspended ceiling?

Holes and cuts appear due to blows or other impacts from sharp objects. Often the cause is careless movements of tools during repairs, for example, when installing a cornice or cabinet, or unsuccessful attempts to remove furniture, ski poles, billiard cues and other things with sharp edges. It is almost impossible to scratch or make a hole in the ceiling with a blunt object, even with an impact.

On film, cuts occur more easily. The fabric fabric is denser and more durable, but it can also be damaged. A hole is formed at the puncture site. It looks messy, but nothing bad will happen. A cut is a more unpleasant injury, as it spreads over time under the influence of tension forces. As a result, instead of minor damage that can be easily repaired, a large hole is formed.

In case of a cut, you must immediately seal the stretch ceiling with masking tape so that the canvas does not spread further. Ordinary tape will also work; traces can be removed with ammonia after the repair is completed.

Sometimes other damage occurs:

• divergence of the seam between the individual canvases (the actions are the same as for a cut);
• insufficient fixation, due to which the baguette moves away from the wall (additional reinforcement of the frame in this place will be required).

In these cases, it is more difficult to repair the ceiling, but restoration work will cost less than completely replacing the canvas.

Is it possible to repair the hole yourself?

If you installed the ceiling yourself, then gluing it without involving specialists will not be difficult, since you already have the necessary skills and tools. If you have no experience, then you can only repair small holes and cuts yourself. Anyone can apply a patch or decorative sticker. More complex repair methods, such as installing an additional lamp at the puncture site or re-harpooning the canvas, should be entrusted to professionals. The same applies to serious damage such as rupture of the film or the profile moving away from the wall.

Companies that install suspended ceilings must provide a guarantee. Certain types of repairs are performed free of charge. As a rule, this is the elimination of problems associated with shortcomings of specialists. Cuts and punctures caused by careless actions of the owners or other repairmen will be removed for a fee.

It is important to remember that any intervention in the ceiling structure (for example, installing new elements or partial dismantling) will void the warranty.

In cases where the installation was carried out by specialists, you must first find the contract and check whether it has expired guarantee period. And if it ends, it’s worth weighing the risks self-repair, since inept actions can lead to more serious damage to the canvas. It's cheaper to patch a small hole than a large cut.

What glue is suitable for stretch ceilings

To repair a stretch ceiling, you need a composition that reliably fixes the canvas and does not damage the PVC film or fabric. Professionals choose the cyanoacrylate product “Cosmofen CA 12”. This is a one-component adhesive that is used for any plastics, rubber, leather and even metals. In the case of suspended ceilings, Cosmofen is used for the following work:

• connection of harpoons;
• repair of vinyl films and polyester fabrics;
• gluing the harpoon to the PVC sheet;
• installation of thermal rings, pipe loops and ventilation grilles.

Advantages of Cosmofen glue:

• sets quickly, as it has high adhesion;
• dries completely in 6 hours (at air humidity of about 60% and temperature +20ºC, in other conditions the time may differ);
• reliably fixes glued surfaces;
• does not harm health, as it is non-toxic;
• resistant to frost, heat and sunlight (used both indoors and outdoors);
• not susceptible to mold or corrosion.

Methods for repairing a puncture or cut

First of all, seal the hole masking tape. Further actions depend on the location and size of the damage. Let's take a closer look at what to do in different situations.

The method is suitable for minor cuts or scrapes. For this, a piece of fabric or film left after installation will be useful. U this method repair there are two variations. The easiest way is to glue the patch directly over the puncture. To repair a cut on a torn stretch ceiling, proceed as follows:

1. Cutting out a piece from the canvas the right size and shape (so that the hole overlaps with a margin).
2. Spread with Cosmofen glue.
3. Apply to the ceiling and smooth out.

In this case, the patch will be noticeable. If the type of fastening allows it, it is better to partially remove the canvas and glue the patch on the inside, and then tuck the harpoon back into the baguette.

Decorating with a sticker

If the patch cannot be hidden, good decision will turn it into a decorative element. The room will look unusual and interesting.

The method is suitable for:

• panels that cannot be re-installed (with glazing bead or cam fastening);
• medium sized holes (5-10 cm).

Suitable reusable stickers for interiors, which are sold in large home improvement or construction stores. The topics are very diverse: flowers, insects, animals, travel, landscapes, etc.

To repair a hole in a suspended ceiling, you need:

1. Carefully remove the self-adhesive applique from the white backing.
2. Place it on one edge of the ceiling near the cut.
3. Using careful movements, straighten the image, slowly gluing it to the surface.

It is necessary to ensure that there are no air bubbles. If this happens, the patch is partially peeled off and smoothed out again. You can pierce the tubercle with a needle, but very carefully so as not to touch the canvas.

Advice! To make the interior look more harmonious and complete, place several images in different places.

If the cut is located near the chandelier, there is another option. You can install a decorative rosette. For a stretch ceiling, choose a lightweight foam product.

Ventilation grill installation

As a rule, a diffuser is installed if a puncture or cut occurs in a corner. The size of the element is selected so that it is larger than the defect.

Repair of a stretch ceiling occurs as follows:

1. A plastic ring is glued to the canvas (the damage should be inside).
2. If necessary, the PVC film is additionally trimmed.
3. Insert the grate.

This method is suitable for all materials and types of fastening. The diffuser will provide additional air circulation. In addition to cuts, problems such as film sticking or sagging are eliminated.

Installation of spotlight

The option is similar to the previous one, but more complex in execution. Suitable only for ceilings with a harpoon fastening system, since you will have to partially remove the canvas. Additionally, electrical skills will be required.

Installation is carried out as follows:

1. From the side of the cut, part of the canvas is dismantled.
2. TO rough ceiling screw the mortgage in the place where the lamp will be located.
3. Lay electrical wiring and connect to the network.
4. Reinstall the canvas.
5. Glue the thermal ring, cut out the film and take out the cable.
6. Connect the lamp and insert it into the hole.

Peculiarities! You don’t have to limit yourself to one light bulb; you can arrange them in a group: a straight or curved line, in the form geometric figure etc. Such lighting helps to highlight a certain area.

Complete removal of a cut near a wall

This method is also used only for film ceilings with a harpoon connection. There is one more limitation - the distance from the hole to the wall should be no more than 15 cm.

The ceiling is repaired as follows:

1. Partially pull the harpoon out of the baguette at the cut site.
2. Cut off the damaged area.
3. Re-glue the edge to the canvas in small steps of 2-3 cm.
4. This section of the film is heated and secured in the profile.

It's okay that the canvas will have to be shortened a little. Vinyl film stretches well; with careful work, after restoration the surface will look like new.

What to do if the stretch ceiling breaks

This is quite serious damage. Possible reasons cracks:

• the cut was not sealed immediately and it was severely torn;
• the lamp was installed carelessly or ventilation grille, there is no tread ring that prevents the film from tearing;
• as a result of incorrect cutting, the tension was too strong, which caused the fabric to crack (this is only possible if low-quality film is used or the seams are poorly welded).

In such cases you need:

1. Trim edges if they are uneven.
2. Glue a harpoon to both sides of the gap.
3. Install a special dividing profile on the ceiling at the junction (it should be on the same level as the rest of the frame).
4. Insert the canvas into the baguette.
5. Decorate the joint with masking tape to match the color of the surface.