Garden furniture from. Do-it-yourself garden furniture for a dacha - photos of successful homemade products. Chaise lounge for the cottage

The Astela Mebel online store offers the purchase of garden furniture for private and commercial use. Our outdoor products are manufactured at leading furniture factories in Russia, Europe, Israel, Asia, and we, as direct direct suppliers, offer the best prices without extra charges. Moreover, all products are characterized by impeccable quality, high ergonomics and respectable appearance.

It is profitable to buy garden furniture for the garden and home

We offer a wide variety of garden furniture in Moscow, which is produced using new technologies in strict accordance with international and Russian standards quality, safety and environmental friendliness.

For production, professional furniture makers use only high-strength and weather-resistant materials: artificial rattan, weather-resistant plastic, natural wood, teak, Siberian larch, oak, beech and other hardwoods, synthetic and natural fabrics. The body of furniture items can be steel or aluminum, and for seats, tabletops and other furniture elements, textiline, polyester, tempered glass, wood-polymer composite, polywood, etc. are used. Original designer models made of basalt fiber in combination with polyurethane.

As a result, you can inexpensively buy beautiful and durable garden furniture from us, which will remain in its original form for a decade. The products are resistant to mechanical stress and the influence of climatic factors, such as ultraviolet radiation, high humidity, temperature changes, as well as biological influences (insects, fungal mold). Our furniture is mobile and does not require special care.

Our catalog of garden furniture, including the section, presents thousands of products made in a variety of styles and color scheme.

Tables of various sizes.
Chairs, armchairs, sofas.
Sets consisting of 2 or more items.
Sun loungers for relaxing near bodies of water.
Hammocks and wooden frames.
Swings and modern hanging chairs.

You can also choose products and accessories from us - umbrellas, pillows, mattresses, which significantly increase comfort, as well as furniture for storing garden equipment from cabinets and chests to full-fledged sheds and outbuildings. In addition, we offer an alternative to permanent buildings - prefabricated tents and gazebos for landscaping an area that is perfect for relaxation at any time of the year.

We accept orders around the clock, and prompt delivery is possible throughout the region and throughout the Russian Federation.

In the spring and summer, the question of how to make garden furniture with your own hands becomes popular. Successful homemade products can become the most important decoration of any garden. Before you think about how to properly make garden furniture with your own hands, it is worth determining what it can be made from. The most common material for country furniture is wood, which fits perfectly into landscape of the site, but other materials are also used. Be sure to take a closer look to see if you still have any seemingly unnecessary things in your dacha or country house. Quite often, masterpieces are made from the simplest objects.

DIY garden furniture. The most popular trend is wooden furniture

Wooden furniture is environmentally friendly, beautiful, laconic and relatively easy to manufacture. Sometimes even brute male strength is not needed to work with wood. Do-it-yourself garden furniture is made from wood in various ways, depending on what materials are to be used:

It is easiest to work with ready-made boards, bars, slats - already processed material. There are many simple and more complex ways to make garden furniture with your own hands. Benches with a backrest are convenient for relaxation, a whole set of furniture is indispensable for organizing a feast, and a bench without legs will make swing- all you need is a little carpentry skills, boards and a lot of imagination.

Advice! It’s better not to choose logs to create furniture coniferous trees. They emit resin that stains the clothes of those sitting. If there is no other material, the wood must first be deresined.

Much more monumental benches and tables are made from logs. Sometimes you can just put a large log and throw a couple of pillows on top to make it appear comfortable spot for sitting, but it is better to work on creating more interesting project. Some craftsmen manage to do without a single nail, creating a mobile log structure.

Hemp is great for creating garden furniture. Individual small stumps can be adapted for stools, and a larger stump can be used for table. It is only important to secure the stumps so that they do not fall or wobble, for which they can be dug into the ground or placed on a flat surface - a pedestal on the terrace or a small platform on lawn. To make sitting comfortable, you can sew bright pillows for them.

If you use branches and snags from the forest to create garden furniture, you can find yourself in a real fairy tale. Nature itself sometimes dictates the original outlines of future masterpieces. Will fit harmoniously into the design of any area garden bench from branches, for the frame of which it is better to take a more durable material (logs, bars, etc.). Driftwood or branches are sometimes even used as legs, but for structural strength it is better to use them only on the back and armrests.

You can use tree cuts to create garden furniture or decorate it. Such cuts can be used for a tabletop, chair seat or stool. They are attached to each other and to the base using waterproof glue.

Today, outdoor furniture is an indispensable attribute suburban area, where there is a green corner, even if it is small. Without a comfortable lounger and a comfortable set, you won’t be able to fully enjoy your vacation on fresh air. After all, there is nothing better than eating in the shade of an apple or pear tree, and there is little that can compare with dozing in a hammock. Those who have already purchased comfortable wicker furniture for their garden, for example, a rattan chair or a comfortable garden sofa, are well aware of this. However, most likely, everyone knows firsthand that buying such furniture is not exactly a cheap pleasure, so not everyone can afford this luxury. garden furniture DIY - an excellent alternative for those who are not eager to part with a tidy sum. And making garden furniture with your own hands is much more pleasant.

Wood is the best material for making garden furniture

The greatest success among summer residents is outdoor garden furniture made of wood. However, not all types of wood are suitable for these purposes. For example, experts advise abandoning materials made from pine, due to the fact that this raw material is very delicate and sensitive to impact. external factors. It is better to choose furniture made from oak, ash or hornbeam - their wood is hard, durable and easy to care for.

Besides distinctive feature wooden furniture is that it is an absolutely environmentally friendly product, striking in its beauty and variety of textures. Garden furniture is made from wood quite quickly, the main thing is to use high-quality material for these purposes.

Fits harmoniously into the overall design summer cottage — dinner table. In the garden it will perform well in both brown and more bright colors. Besides large table The set should include comfortable chairs, sitting in which you will feel quite comfortable.

To make the seats comfortable, it is worth bandaging them with removable cushions. It's also good when the chair can be folded. Unused, they will occupy less space, and in winter they can be easily hidden in the garage or basement.

The easiest way to make furniture is from finished material. When disassembled, the boards are easier to process, impregnate and prepare for painting. All you have to do is assemble all the parts into a single structure, according to the drawing.

There are many ways to make garden furniture. The Internet will help you choose the right option for you, where in its vastness you can easily find exactly what you need.

Stylish chairs, beautiful tables, comfortable sun loungers, swings, chairs - this is just a small list of what you can do with your own hands. Of course, for this you will need some carpentry skills and good tool, as well as the presence fresh ideas in my head.

How to choose the right style

The most fashionable sets of garden furniture are those made in the French style; country and country styles are also quite popular. Country music is characterized by an uneven, rough structure. Cast iron trimmed with metal-plastic is often combined.

In romantic gardens, wrought iron is appropriate French style. If you want to introduce a subtle note of Provence or shabby chic into a green corner, it is best to install whitewashed rattan furniture.

Comfortable furniture is one of the main items in any green corner. It can be a companion to morning coffee or lunch - barbecue. Daily relaxation in the fresh air, especially on sunny days, is a balm not only for the body, but also for the soul!

Leisure furniture

Garden dining furniture isn't everything. To fully enjoy a pleasant holiday among blooming greenery, you also need to buy a complete set of furniture. Sets include a sofa, two armchairs or chairs, plus a low coffee table. The most fashionable designs are those made of rattan, strewn with large pillows.

Soft accessories are mainly covered with cotton. Underneath the fluffy covering fabric is highly elastic polyurethane foam. Armchairs, sofas and chairs often have a cubic shape, making them voluminous and very comfortable.

Garden set made from pallets (pallets)

Wooden furniture made from pallets is also quite popular. This design is very easy to knock down, paint and impregnate. You can also sew pillows yourself or buy them at a garden accessories store.

Producing furniture from wooden pallets (pallets) is quite simple and, most importantly, fast. Just 2-3 pallets will be enough to fold one on top to get a coffee table. Impact-resistant glass with machined edges is placed on top of the table. That's it - the coffee table is ready, all that remains is to make the chairs. You can also make them from the same material, only here carpentry skills will come in handy. Using a hacksaw or chainsaw, cut the pallet into two parts, one of which will serve as a seat, the second as a backrest.

The presence of a sofa, armchair or lounger made from pallets in the garden will emphasize the individuality of your site and create cozy atmosphere, will make it truly extraordinary and worthy of attention.

If you have a large number of pallets (material can be purchased for a small amount in construction stores), from them you can organize a full-fledged place for relaxation, where you can relax with a large group. In this case, construction or open construction can be abandoned altogether.

Construction pallets (pallets) can be used both painted and unpainted. Their design feature allows you to store something useful between the rows of boards. This space can also be occupied drawers, providing them with a special mechanism and beautiful handles

The furniture is always like new

Climatic conditions contribute to the fact that both wood and vine or rattan fade, become dull and brittle. Cast iron and metal furniture may be destroyed by corrosion. So, if you do not have umbrellas in the garden, remember to systematically impregnate the furniture. To reliable materials from the harmful effects of external factors, they should be covered with something.

The best way to protect wood is to apply a special acrylic varnish. It will not only protect the wood structure from moisture, but also prevent blue stains, mold and mildew from appearing on it.

The tree must be degreased. Old layer impregnation should be removed with sandpaper, preferably with a grit of 150 to 320. The thickness of the paper is selected in accordance with the degree of unevenness of the base. Not all types of wood require impregnation. For exotic wood, such as teak, is superfluous.

Rattan garden furniture should also be coated with oil or varnish every 5-6 years. Corrosion on furniture made of metal must be cleaned with fine-grained sandpaper and painted with the chosen anti-corrosion paint.

It is important to remember that restoring old furniture is always cheaper than purchasing new one. Well-maintained and updated furniture will make your garden elegant and attractive without any additional costs.

Chaise lounge for the cottage - comfortable relaxation in the garden

In ancient times, people loved to relax among the greenery on soft ottomans or sun loungers. Today these are not only comfortable, but also functional sun loungers.

Their streamlined, adjustable design features headrests and armrests. Fabric coverings removable, so the sun loungers can be placed in the garden even on rainy days.

Beautiful design and smooth lines - everything you need for a country chaise lounge

To protect from the sun, you can use a shade canopy or umbrella. The latter will brighten up your time spent outdoors. A bright, colored spot that protects from the sun will add a touch of freshness and lightness to your garden.

Garden umbrellas must be stable so that they are not overturned by a sudden gust of wind. Therefore, the umbrella frame must be durable. The correct base is also very important, and functional masts and bowls must be made of good quality material.

Rattan - a classic of the genre

Rattan has been used to make furniture and accessories since ancient times. Furniture made from it is characterized by lightness, elasticity and is associated with a romantic, elegant garden in the Provencal style.

This material is easy to paint, so you can always keep your favorite furniture in good condition. in the best possible way. Rattan looks beautiful in its natural color, and the noble shade of bleached oak also suits it well.

Wicker furniture in the garden looks impressive and elegant, but it is worth noting that you are unlikely to be able to immediately create masterpieces that you saw in specialized stores without some practice. Rattan weaving is a rather labor-intensive process.

The best way to start is to practice small items, for example, weave a small stool or table top. Only after successful practice can you move on to weaving more complex furniture, such as a chaise longue or a swing.

Rattan in classic style

This calm and elegant will enliven any. Rattan is ideal for it. IN classic style Accessories are very important. Every piece of furniture is worth laying out soft pillows in soft pastel colors or cover the furniture with a cream blanket or woolen blanket that will warm you during cold summer evenings.

There are no special requirements for creating an interior in a classic style - absolute freedom of action. Furniture made in this style will look equally beautiful both in the garden and in the house.

Caring for rattan furniture

Rattan is not a moisture-resistant material, so furniture made from it should be protected from rain. Fortunately, due to its lightness, this does not cause much trouble. This material wears out over time, so the furniture should be taken care of regularly.

Modern garden furniture

Contemporary outdoor furniture follows two hot trends in terms of shape.

The first is minimalism and geometric simplicity.
The second is futuristic forms.

A beautiful and stylish terrace with beautiful modern garden furniture - everything you can dream of

Modern fluorescent furniture looks very interesting. It uses natural solar energy. During the day it absorbs rays to emit a fabulous glow in the evening. Therefore, she can replace the lamps in front of the house. Modern furniture should be purchased in ready-made sets. They can be designed in the same color scheme or bright duets.

Popular materials for manufacturing

Modern garden furniture is most often made of durable and moisture-resistant plastic. The design of such models meets the hottest trends of our time.

Here are two types of material that have gained particular popularity:

Technorattan- an excellent alternative to wicker or rattan. The reason is resistance to moisture and direct sunlight. In addition, modern furniture is very comfortable.
Polypropylene- popular polymer material, characterized by high mechanical strength, tolerates exposure to adverse weather conditions well. By the way, it is also quite plastic during the production process, which sometimes leads to bizarre forms of furniture. The only drawback is that some furniture made of polypropylene is very light, which means that strong gusts of wind can disrupt its stability.

Outdoor recreation is the best option to relax and regain your strength

And finally. In the article, we mentioned only the most popular and in-demand garden furniture for the garden, which you can make yourself.

You can try to create something different, no less interesting and useful. The main thing for this is to put in a little effort and effort.

You will likely find the information received useful in your creative endeavors. Experiment and create, try to make what you already have a little better.

Furniture on garden plot necessary. Without these items garden exterior It is impossible to relax with comfort and convenience. Furniture should be light, durable and attractive in appearance. Wooden furniture will fit most naturally and organically into a garden plot. It satisfies all the above conditions, and in order for it to be combined with the rest of the design, you can design and make it yourself.

There is no material more suitable for garden furniture than wood. It is quickly processed and looks noble even without additional coating. In addition, wood is considered the most environmentally friendly material.

Externally, wooden objects in a dacha space look beautiful and interesting. Uniqueness and grace are added to them by decor with ribbons, live plants and flowers, designer pillows or charming soft toys.

The combination of wood with materials such as stone or metal looks impressive. For example, a bench or gazebo made of solid wood goes well with stone or metal accessories. Wicker furniture has a special charm. Not only is it very cozy, but it also looks pretty.

The strength of solid wood furniture depends on the quality and type source material, as well as from correct assembly. Tips for choosing material for work:

The most popular in this matter are beech and oak. They do not rot, last a long time and are highly durable.
Logs from coniferous species release resin. If the wood is not deresined, the finished products will stain the clothes and skin of everyone who touches them. However, they are characterized by increased strength and durability.
Furniture made from spruce, pine and larch is easy to repair and can withstand both rain and sun. Externally, objects made from these breeds look aesthetically pleasing and attractive.
Another great option is teak wood. Teak is resistant to any climatic changes; it is not for nothing that its wood is used in shipbuilding. Teak furniture looks impressive thanks to the natural patterns on the wood.
Ready-made slats, bars, lintels and boards are the easiest material to work with.
Stumps and logs will help to build unusual furniture with a minimum of effort and time. By using your imagination, you can create truly creative products.
Bird cherry branches are suitable for making wicker masterpieces from flexible tree varieties. They are pliable, soft and plastic.

Use our drawings to build strong and reliable garden furniture yourself.

Tools

Before starting work, prepare the necessary tools:

jigsaw and hacksaw;
screwdriver with drills;
drill, hammer;
tape measure, pencil, square;
wood glue;
grinding machine or sandpaper;
fasteners and wrench;
Bulgarian;
varnish coating, paint, impregnation, brushes, rollers, sprayer;
nails, screws, nuts and other components.

The material is required amount wood

Design options

We present some options for wooden structures that can be made with perseverance and dexterity.

Garden bench

A bench is indispensable in a garden plot. No one will refuse to relax after hard working days on a comfortable bench. And the realization that you are sitting on furniture made with my own hands, will warm the soul and give self-confidence.

Part marking	Quantity	Parameters, cm
A	Four	36,6155
B	Two	56,5155
C	One	96155
D	Two	48,5155
E	Two	76155
F	Seven	140155

Assemble the parts as shown in the drawing. Start with the legs. Connect parts A and B first, attach rail D to them to support the seat. Next, part E is attached. All slats are connected with bolts. The opposite leg is assembled in the same order. Next, attach part C. The final step is to attach the strips F. Leave a gap of approximately one centimeter between them. Coat the finished product with two layers of varnish. Don't forget to sand between coats.

Where to gather for a family holiday dinner in the warm season? Of course, in the garden for a picnic. Here you cannot do without a spacious table, at which there is enough space for all friends and family members.

Part name and marking	Quantity	Parts size, cm
No. 1. Rail	Eight	24593
No. 3. Bottom jumper	Two	153143
No. 4. Leg	Four	85103, cutting angle 60
No. 5. Seat	Two	245253
No. 6. Jumper under the table	Three	70103, cutting angle 75
No. 7. Emphasis	Two	110103
No. 8. Bottom board	Two	220103

The length of part No. 3 can be adjusted according to individual preferences. It is better to fasten the parts using special bolts for furniture. Nuts and screws can also be used. For aesthetics, we recommend tightening the bolts with inside tables and benches so that they do not spoil appearance products. Sand the finished furniture and varnish it in several layers.

A folding chair in the garden will never be superfluous. It is compact, convenient and does not take up much space. A folding chair can be easily transported from one place to another. You can sit a child or a guest on this chair.

For manufacturing you will need the following parts:

Dowels are installed in the sidewall bars, due to which the chair will fold in half. The grooves for them must be made in the vertical slats of the rear leg. Typically, a folding chair is made with an inclined back. The angle varies from 15 to 35 degrees. The product made according to our drawing will have a backrest angle of 35 degrees.

If there are children growing up in a family, then there must be at least a small children’s corner in the garden plot. Here it is advisable to install a sandbox, a slide and a swing.

It is the latter that will be discussed. The parameters of the finished swing, which are shown in the following drawings, are small. But how much joy a child will experience at the sight of a wooden miracle made especially for him!

The width of the swing is 30 cm, the length is 40 cm, the height is 24 cm. To make it you will need twelve slats, two of which will go on the back, five on the seat, two on the sides, two are attached under the seat and one bar keeps the baby from falling .

Don't forget to leave a couple of centimeters of the bars for processing.

We associate sun loungers with the sea, sun and sand. But this piece of furniture can also be used in the garden. On a cozy wooden sun lounger, which we offer to make according to our drawings, you can sunbathe under the sun's rays. And by covering the chaise lounge with a soft blanket and pillows, you can use it as a chair.

The dimensions of the parts are indicated in the drawings:

Pre-sand all the bars, make required holes. Pay close attention to every detail.

Sun lounger

A simplified version of a chaise longue is a sun lounger. Make it easier and faster. Prepare your tools and take wooden slats– the sunbed will be ready in a couple of hours.

Parameters: height – 0.3 m, length – 2.2 m, width – 0.7 m.

Materials: boards 1.5 meters wide and 0.4 meters wide; flooring strips; self-tapping screws

Stages of work:

Sand the boards well.
Assemble the frame and attach the legs to it.
The width of the base corresponds to the location of the lounger. But he shouldn't fail.
Attach the backrest from the side of the head. Its slope will be adjusted using grooves on the frame. Make no more than four grooves.
The planks on which you will sunbathe are attached with self-tapping screws. To make your work easier, pre-make holes in the screw-in areas.
Before final assembly, coat each plank with varnish.

Wicker furniture

To learn how to create real masterpieces, you will need considerable experience and preparation. Weaving furniture is painstaking work. You can try your hand at making a round seat for a stool or a tabletop.

Video - Wicker furniture: we do it ourselves

Conclusion

At first glance, it may seem that making a good one yourself wooden furniture difficult for a garden. Of course, this will require a certain amount of physical effort and time. But the result you get in the end will be worth all the effort.

Even the most modern exterior can become much more comfortable if it contains garden furniture. Undoubtedly country furniture has differences with pieces of furniture intended for furnishing residential premises, so it can even be made from improvised materials. It is enough to study a few tips, show imagination, perseverance, a little work, and furniture will appear in your garden plot that will become the pride of the owner and the envy of the guests.

In this article we will tell you how to make garden furniture with your own hands from wood, pallets, metal, demonstrate drawings, diagrams and photographs, as well as video instructions for making garden furniture.

How to choose material

In order for pieces of furniture to blend harmoniously into the landscape, it is worth making a choice in favor of natural wood. To do this, you can use branches, trunks or tree roots, which will help create unique works.

Natural wood has a variety of shapes, which makes it possible to produce original furniture items with minimal processing. When choosing materials, you should be creative and try to see the unusual in ordinary things.

If you want to decorate your garden with not only fashionable, but also reliable items, take a closer look at a table with a base made of concrete blocks, bonded with cement mortar and then tiled. To make a tabletop, you will need 5*10 cm bars, fixed with glue in a frame. The strips forming the surface of the table are attached to the resulting holes.

Stylish and economical products can be obtained from branches of flexible tree varieties. Nothing can compare in beauty to wicker garden furniture. If you do not have experience in this process, stop at bird cherry branches, which are easy to process and pliable.

Video

This is how furniture is made from technorattan:

Types of designs

One of the popular options for garden furniture is workplace gardener Even if you are not an avid gardener, without a well-equipped table it will be much more difficult for you.

If you prefer original solutions, you can make a picnic table in an unusual style.

On a fine summer day, a gazebo with folding chairs and a table, which are not only comfortable, but also compact, will be indispensable. Bright colors will bring variety to the landscape modular designs, type of benches. During frequent family vacations, do not forget to take care of the kids and make a table and chairs of a suitable size for them.

Nuances

Beginning carpenters in the furniture industry should give preference to more economical options that are not too difficult to implement. That is, those for the manufacture of which you do not need to make difficult connections. Make a choice in favor of wood, which is easiest to process and purchase at a relatively low cost, and it is much more pleasant and easier to work with;
For the practical design of furniture, semi-hard, hard and soft woods, as well as wood-based materials, are ideal. Rounded pine blanks are often used as legs, and boards with a cross-section of 2*12 cm are used for seats and backs; armrests are optimally made from 5.5*3.5 cm bars;
You can begin the process only after you have drawn up a sketch, either drawn or in the form of a drawing. Before starting work, decide on the dimensions of the future product, and stock up on the following tools:

bolts;
screws;
PVA glue;
self-tapping screws.

Also, as a support for the products, you will need metal corners, pipes, channels and other available materials suitable for the furniture you have chosen. At the same time, make sure that all fasteners are completely recessed into the material, otherwise you may get injured by them while using the furniture.

Country wood furniture must be treated with antiseptic and protective compounds, which will protect parts from rotting and abrasion. If you do not yet have experience in making furniture, when making seats, follow proven technological advice: the product should have a slight slope towards the back, which will make the use of the bench or chair as comfortable as possible.

In order to make a piece of furniture from scrap material, it will help you old barrel, which will later become unusual chair with backrest. In a short time you can build a bench using boulders and stones as supporting legs. wooden board as a seat. To build such a bench you will need the following tools:

planer for processing boards;
drill with a diamond attachment;
anchor bolts.

Having processed the board using a plane, adjust the boulders to the required height, having previously dug a hole and placed it at the bottom sand cushion. It is necessary to drill holes in the board and stones for anchor bolts.

The final step is to tighten the bolts and coat the surface of the board with a protective layer of varnish.

Implementation of unusual ideas

Furniture made on site

For creating interesting items To decorate the landscape, you can decorate the table, chairs and benches with beautiful original branches. Such furniture will become a wonderful and appropriate element of the garden exterior and will not leave any of the guests indifferent.

Optional to create beautiful furniture Using treated wood, with a little imagination, you can successfully use forked tree trunks without pre-treatment.

Another option for making a table for a summer house is to use a large cut of the trunk as a support and a horizontal cut of the butt as a cover. The horizontal cut is fixed on a shield made from parts of the trunk. To make the structure reliable, it is necessary to support it with logs, the top of which has been previously hewn off, and secure them to support pillars.

Pallets are also called pallets. They are trays enough large sizes, which usually remain from building materials. If you do not have the funds to buy garden furniture or even blanks for making it yourself, then we suggest that you use pallets for these purposes. Buy them at very affordable price Available at hardware stores. There is enough of this goodness there.

The boards in pallets are not stacked closely, but at a distance equal to half the width of the board. Pallets also have sides with a height of 10 to 14.5 cm. There is no single size of pallets, but in our country 100x120 cm are usually found and the European standard is 80x120 cm (they can have a continuous laying of boards).

Regardless of what piece of garden furniture you have to make, they should be pre-treated. First, you need to remove dirt from the wood, then dry it and sand it.

In some cases, to avoid getting a splinter on preparatory stage pallets are painted with paint and varnish. But, most often this action is performed at the final stage of furniture manufacturing.

To make garden furniture, it is not enough just to buy pallets. You will also need thin nails that are not very long. In addition, you need to purchase furniture fittings eg wheels, handles, etc.

You will also need varnish/paint, glue, glass, small lighting and fabric. The composition of this additional set, of course, depends on the design of the furniture.

Making a coffee/dining table

The simplest option for garden furniture made from pallets is dining and coffee tables. To make them, you just need to connect 2 pallets, placing them on top of each other and connecting them with nails. The tabletop can be a sheet of fiberboard, glass or thin wood. With that, the coffee table is ready.

To make it easier to move on the terrace, for example, you can screw wheels to the table.

To make a dining table you need more pallets. For the tabletop you will need 2 pieces, and to make the legs you will need 1 pallet, which you will need to cut into 4 parts, stretching it vertically and nailing it in the corners.

Another option for legs is to take 2 pallets, place them vertically and nail them whole on the sides. So, you will get a large dining table. If this table height is not enough, then you will have to lay 1 more row of pallets.

If you have wood carving skills, you can make the legs into the desired shape.

The relaxation area can be decorated with sun loungers. To make them, you will need 3 pallets - 2 rectangular and 1 square (it will be 10 cm wider than the rest).

Place rectangular pallets together and fasten them together with nails. Initially, the pallets need to be sanded and then painted. Now you need to make the back of the chaise lounge. At this stage you will have to work a little more. Disassemble the wide pallet: remove the bottom layer and partly the middle one (1-2 pieces should remain). The top layer of the pallet will serve as the base. Remove 2-3 boards from the backrest blank. You will need them in the future, so disassembling the pallet should be done very carefully; you don’t need to break anything. Saw one of the removed boards in half.

Now position the square pallet at an angle to one side of the rectangular pallets. This way, the back of the chaise lounge will be formed. Secure it using the screws previously removed from the pallet. The finished product can be draped thick fabric or mattress.

Making a sofa is very simple. For its base you will need 3 square pallets and 2 rectangular ones. As sidewalls, you can use 1 pallet, pre-cut into 2 identical parts so that you get 2 thin pallets. Entire pallets can act as backrests. Thick screws/nails and metal corners are used for fastening.

Now all that remains is to cover the sofa with plywood, which can alternatively be glued on. Sand the sofa and paint it as desired.

Make, for example, a mattress for sitting and back cushions from foam rubber. So, you will get a cheap, but very original sofa.

Wooden furniture is environmentally friendly. It is distinguished by its laconicism, beauty and relative ease of manufacture. Not only a man, but even a woman can cope with this task. Garden furniture can be made in a variety of ways.

It is easier to work with ready-made, pre-processed slats, bars and boards. There are both simple and complex circuits making furniture from wood. To organize a recreation area, it is better to make benches with comfortable backs; for a feast you will need a whole set. It's very easy to make a swing from a bench without legs. To realize these ideas, you need to use your imagination, have basic carpentry skills and acquire the necessary source material.

Needles are not suitable for making furniture. It releases resin, which will stain the clothes of vacationers. If you only have pine needles at your disposal, then before starting work, it needs to be deresined.

To do this, you can use one of the compositions:

Mix acetone and water in a ratio of 1:4.
Mix acetone and rubber soda in a 5:1 ratio.

The surface of the wood must be treated with one of the solutions, and then rinsed with water and dried. Then the wood is treated with antiseptics and varnished.

Monumental benches can be made very quickly. To do this, you will need several logs, depending on the required number of benches. The simplest option doesn't require much intelligence - just lay a large log and throw a few pillows on top of it. But perhaps, for arranging a garden/gazebo/terrace/patio, it’s better to come up with something more aesthetically pleasing and original.

For organization dining area You can use hemp in the garden. Small stumps will act as chairs. And for the table you will need a more massive stump. To make dining convenient, the stumps need to be fixed. For example, they can be dug into the ground or placed on a flat surface - a small area on the lawn or a pedestal on the terrace.

For the comfort of those sitting, sew/order bright pillows on the stumps. You can use a wooden board as a tabletop. In addition, decorate the backrest and armrests for stumps with driftwood and branches.

A cut of wood can serve as an original tabletop and even a seat for a chair. For example, a saw cut of a larger diameter can be installed on a stump of a smaller diameter. They can be secured with waterproof glue or regular nails.

Tools you will need:

boards;
hacksaw;
sandpaper;
electric saw;
wood varnish;
hammer and fasteners;
tape measure and pencil.

De-resin the wood first. How to do this has already been mentioned above. Before installing it on a stump, the stool cover or table top must be sanded. You can make such a simple set right in the garden or in the gazebo. If it is installed in the garden, then take care of installing the beach umbrella in the table, for example.

Metal is more durable than wood, so it is better suited for making garden furniture. However, working with it is much more difficult than working with wood. For the manufacture of garden furniture, thick-walled duralumin/steel tubes are usually used. There are two options for connecting metal furniture elements:

Nuts/bolts.
Welding seam.

Duralumin cannot be welded, so it only needs to be connected with screws/bolts.

The supporting parts of the table/benches/chairs can be made from profile pipe square section. This material is affordable. It can be purchased at households. stores and construction markets. In skillful master hands new life they purchase tubular metal elements of baby strollers, aluminum folding beds, and even outdated water pipes.

It is easy to assemble metal furniture if you bend elements from pipes or connect their straight sections. To bend the pipe without damage, make a simple flexible tool from the brake car disk. You can look at how he looks a few more times.

To bend the pipe follow these instructions:

Plug the end of the pipe with a stopper, fill it with sand, and then plug the other end with the stopper.
Place it in the folding device, clamp it with the pin and the protrusion on the disk.
Bend the pipe to the desired level. This requires a lot of effort.

To make the bending process easier, heat the bending area red-hot with a blowtorch.

The parts must be the same, so you will also need a plaz. It is a sheet of plywood/cardboard on which the contours of furniture parts are applied. After bending, check the pipe on the plaza for compliance with the contours. If you must have several identical parts, then they will also need to be checked for coincidence with each other.

If you connected furniture elements by welding, they will have to be processed. This can be done with a grinder/file. Before finishing metal frame, it needs to be cleaned of rust, if any, and then polished.

To make the simplest frame you will have to prepare the following tools and materials:

Profile pipe 20×40.
Bulgarian.
Welding machine with electrodes (No. 3).
Grinder/file.
Sandpaper.
Square/meter

The size of the bench depends on your needs. Cut the pipe according to the measurements:

4 children for the frame.
1 child for the cross member.
4 pieces for legs.
Paired frame parts: 2 – length equal to the width of the bench and 2 – length specified in the diagram.

The length of the legs should be determined depending on the height of the bench.

Assembling a metal bench

Clean the surfaces where the weld seam will be with a file. Lay out the individual frame parts on flat surface in the same way they will be cooked. Connections must be made at an angle of 90º. You can check their evenness with a square.
Mark the middle long sides frame and weld the cross member.
In internal corners The legs of the frame need to be welded. They must be welded perpendicular to the plane of the frame. This is important, otherwise the frame will be uneven and the bench will be unstable.

The seat can be made of MDF/thick plywood or boards. If you want the bench to be made entirely of metal, then cut the required number of identical pieces of pipe/strip steel for the seat. Weld/screw these elements onto the frame.

In accordance with this pattern, you can make a frame not only for a bench, but also for a chair/table/stool. Just change the dimensions of the frame and think about additional elements/decor.

The frame of the bench is made of pipes bent at right angles in two planes, shown in the diagram.

To work you will need:

Bulgarian;
pipe bender;
duralumin/steel pipe Ø22 mm;
measuring tool;
screws/studs;
wooden bushings.

The entire frame must be bent from a pipe of the appropriate length. This is done according to the measurements and sketch, and checked on the plaza, as in the previous case. If you have only short sections of pipes at your disposal, then they need to be bent in parts and then connected into a single structure. To do this, bushings are driven into the ends of the joint. They should be adjusted so that they fit tightly. Then drill holes for the screws at a distance of 1 cm from the cut and fix the parts. The fastener is screwed into the bushing through the hole made.

The seat frame can be assembled from bars. In this case, it is attached to the frame with screws and corners. In exactly the same way as in the previous case, you can make a table/stool using this sketch.

To make a stool, bend metal parts in the shape of the letter P. This is needed for the back, and also the legs. The front legs and the frame for the seat are made according to the same principle as the bench - a bend is made in two planes. As in the previous case, you can use pipe sections, bend them in detail, and then connect them with bushings.

The front and back of the chair are connected by welding or screws/screws.

After making the frame, it needs to be processed and painted. So, you can create an imitation of forged furniture, which looks very beautiful and noble. To make a soft seat, screw plywood, previously covered with foam rubber and upholstered with furniture fabric, to the base with self-tapping screws. In the same way, make a soft back.

By increasing the length of the frame and soft parts, you will get a soft garden sofa.

If you master the manufacture of these simple metal furniture elements, then in the future you will be able to make something more complex using the appropriate sketches/drawings.

It doesn’t matter which option you choose for yourself, in any case the result will be exclusive. And furniture created independently will constantly delight the household, giving warmth, comfort and extraordinary beauty.