Manufacture of chairs in Russia - ordering furniture with delivery

Specialists of the Sheffilton brand inexpensively manufacture custom-made chairs according to individual sizes. You get the opportunity to purchase furniture that matches your color scheme to harmoniously complement the interior of an apartment, house, cottage, as well as public institutions - offices, restaurants, cafes. The catalog has finished models, as well as a designer that allows you to create an original chair for the interior. Choose any seat model, then the frame and your chair is ready!

Own production of chairs allows us to control all stages of furniture manufacturing, from the selection of raw materials and fittings to packaging finished products. The cost of the chair depends on the model and the chosen color, approximate prices can be obtained from our consultants. We responsibly undertake the manufacture of chairs: soft, office, kitchen, metal, wooden, plastic, on a metal frame. Our furniture is strong, durable, beautiful. Check out our portfolio for examples of our work.

Ordering production from us metal chairs and other furniture, you save time and money, and get reliable furniture that will last long enough to recoup the costs more than once. Commercial and domestic furniture should be safe, practical and, of course, beautiful. We are valued because we not only know this, but also implement it in our products. Call for pricing and delivery times for custom made furniture.

Production of chairs and tables to order in any color from 50 pieces with the minimum amount order 50 000 rub.

Offering our customers the manufacture of chairs and other furniture, we, first of all, think about your comfort. The work carried out in our studio is not only a guarantee of quality, but also efficiency. You will be pleasantly surprised high level service and reasonable prices, and most importantly - the extraordinary beauty of new products. After all, we employ only highly qualified craftsmen with extensive work experience!

It's good that now, to create a truly luxurious, stylish and modern dining room, you do not have to spend a lot of time shopping. We offer you the production of tables, chairs made of wood and other furniture in our studio. With the help of such a service, you could come up with a design yourself necessary furniture to make it not only beautiful, but also unique place for relax! Each production of chairs in our studio is a painstaking and accurate work that our specialists perform brilliantly.

Offering the manufacture of chairs to order in our salon, we use only high quality materials from the best manufacturers which guarantees the durability of the products.

Work samples

Service	Price	Unit	Note
Departure/assessment (Moscow)	500	rub.
Departure / evaluation (Moscow region)	1000	rub.	Free at the conclusion of the contract
Material	Price	Unit	Note
Textile	From 1000 rub.	m/n	Width 140 cm.
Leather	From 2800 rub.	m/sq.	skin S = 5 sq.m., waste 30-50%
Vinyl leather	From 600 rub.	m/n	Width 140 cm
Foam rubber	From 300 rub.	m/n	sheet: 100cm *200cm b
Sintepon	110 rub.	m/n	Width 140 cm
Aeroform	250 rub.	m/n	Width 140 cm
Spunbond	100 rub.	m/n	Width 140 cm
Eco leather new	from 1450 rub.
Nano skin new	on request
Button cover new	from 100 rub.	PCS.

A chair in the interior is the simplest furniture model in design, which is quite easy to choose and buy. However, if you want to have something exclusive, original, and sometimes just as cheap as possible in the country or at home, the idea arises to make wooden chairs in your own workshop. This article will discuss how to fulfill the intended design, implement the ideological plan, and where to start carpentry work for a novice master.

Chairs accompany people all their lives. They change with the interior, style, purpose and age of the owner, but they are always present in the room. The idea to start a furniture project usually comes from those who saw a photo of a wood product on some resource and were inspired to do their own experiment. If, for example, you often have to repair wooden chairs, then you already know all the nuances of the design, the “weak” points of certain models. Therefore, there are own ideas about how to make a reliable and comfortable chair.

Already at the initial stage, a novice furniture master evaluates the complexity of the work performed, his own practical skills in carpentry and creates a list necessary tools. Beginners are never taken to the production of complex products, realizing that a lack of experience can lead to unsuccessful execution and wasted resources and time on the project. However, experience comes only in the process of work. If you start manufacturing with simple models and use inexpensive materials, it is possible that very soon your own exclusive furniture will become a matter of personal pride.

Woodworking, if desired, is easy to master. If the master has little experience, then there is no point in buying a full set of tools, including their electrical counterparts, or asking the price of woodworking machines. It will be enough to purchase the most necessary, and the rest of the inventory can be rented. Time will tell if carpentry will become a long-term hobby or if the enthusiasm for furniture making fades with the first mock chair.

What kind of wood to use when making chairs with your own hands

Wood is a very generalized name for the material for making chairs. Not every type of wood that is used in the manufacture of furniture will be suitable here. The reason for the strict selection is in the loads acting on the chair in different planes. They dictate the parameters of stability and safety of use. If we consider the options for suitable wood, we get a considerable list to choose from:

• soft breeds - pine, linden, cedar;
• moderately soft varieties - aspen, birch, mountain ash;
• moderately hard woods - walnut, beech, pear, cherry, oak, larch;
• hard varieties - maple, ash, hornbeam and many types of exotic woods.

Useful advice! Oak or beech are ideal for making chairs, but are expensive. For the first furniture samples of your own, it is better to purchase wood that is dense, but financially less expensive, for example, mountain ash.

The most durable products are made from durable wood species. However, it is not easy to assemble such wooden chairs with your own hands, because for high-quality processing source material machines are needed. The price of durable wood raw materials is never low. Soft breeds are processed easily even by hand, but the operational period of such products is not too long. Therefore, the assembly of chairs is usually planned in a combined design in order to achieve the desired strength and reduce the cost of the product. For example, you can use plywood for the seat or back.

As an undesirable material for the manufacture of chairs, experts indicate all conifers due to their straight-layer structure. Ignoring the warnings threatens with frequent breakdowns, the formation of chips and a short service life of the product. Single use softwood in chairs it is a multi-layered plywood for seats. In other cases, even highest quality blanks does not guarantee the durability and safety of furniture. At the same time, conifers should not be excluded from the list of lumber if you plan to design a stool. For such the simplest model chair fit pine or larch.

Carpentry skills are recommended to be mastered on the materials that are available (left over from construction), and you can also use trees cut down on the site. For quality products, for example, the remains of fence boards will not work, because the grades of construction and joinery wood are different. However, for the first experience in making chairs, unnecessary lumber or solid wood may well come in handy.

If wood for manufacturing is bought specifically, then you need to pay attention to such aspects:

• tables and chairs made of wood can combine several types of lumber in their design: solid wood, logs, timber, boards;
• purchased boards or timber must be free of cracks, deformations, distortions, knots;
• the moisture content of lumber or blanks for chairs should not exceed 12%, i.e. the tree is selected dry;
• lumber thickness rule: plank< 100 м < брус;
• the presence of rot, mold, fungus, holes is unacceptable.

Useful advice! Buy lumber with a small margin, as in the manufacture of furniture, there is a high probability of spoiling or breaking any part due to insufficient skill and experience.

For chairs, wood is selected without visible defects. All the features of the cut, which can add texture in the manufacture of interior items, do not play any role for chairs at all. In the vast majority of cases, they can even be a hindrance and significantly reduce the strength and operational capabilities of furniture.

The color and pattern of wood: is it worth considering the features

To make chairs made of wood into an apartment or to give, you need to take care of their organic entry into the existing interior of the room. If the main part of the furniture is made in dark colors, then light armchairs or chairs will look like an inappropriate detail against their background. Construction chemistry for wood processing allows you to achieve different shades. However, it is worth knowing that dark brown color has a walnut, cherry wood will have a reddish tint. Light brown base in oak, cedar, teak, alder, larch, and most bright hues characteristic of beech, pine, birch, maple, ash.

The color of the wood is not important if the chairs are supposed to be installed in the dining area, using deep covers that completely cover the entire frame of the product. In this way, you can successfully hide small flaws in the processing or quality of the selected wood. However, not all interiors involve the installation of chairs with covers, no matter how practical they may be.

A well-chosen color of wood can be additionally emphasized by the expressiveness of its structure. Sometimes the interior needs a bright or, conversely, discreet wood pattern. Beech and alder practically do not have a pattern. Teak can stand out with a striped structure. Oak, maple, ash and cherry have clearly visible growth rings. Exist various techniques changes in the pattern of wooden chairs, photos of the results of these works can be easily found on the Internet and, if desired, do the same.

DIY wooden chairs: drawings, assembly, design options

Before embarking on manufacturing, you should initially decide on the type of intended product, and not select material or look for instructions on how to make a chair. It is on this that all the following steps will depend: searching for drawings, choosing wood, purchasing tools, etc. You can make chairs from wood with or without a back (stool,), with a soft or hard seat, folding or convertible design, with or without armrests. Will it be a comfortable chair or a modest wooden stool, an ordinary chair for dining area or an exotic product - such issues are resolved in the first place.

When it is finally determined how the product will look, proceed to preliminary calculations, measurements and drawings. These actions are needed to calculate the material, selection optimal sizes and comfortable design chairs. To do this, you need to decide on the height and inclination of the back, the width of the seat, the height of the legs, etc. At the same stage, it is worth considering which parts can be made cheaper without losing strength. For example, you can replace the boards with plywood or fabric, make inserts from cheaper raw materials.

If you have experience in the reconstruction of finished chairs or a desire to master the art of carving, then you can try to create antique chairs. From a tree for the realization of such a plan, various breeds are chosen. When there are carved elements in the project, the inserts are made from moderately soft rocks. You can artificially “age” a standard chair using special methods of painting and processing: crackle technique, brushing, patina, coloring and other methods. The product turns out to be extraordinary, and for a certain interior design it can become one of the accents in the room.

Log stool or chair: quick ideas for beginners

The simplest type of chair is an ordinary piece of log, installed vertically. Such furniture is not placed in an apartment: because of its special strength and massiveness, it has a place in the country, in the garden, on the lawn. However, designers in pursuit of extravagance offer lovers of eco-style universal chairs from logs that can serve as coasters, benches, coffee tables and other furniture items.

Instead of a drawing for such models, it is enough to have good photos chairs and cut a log of the length that will be comfortable for sitting. The choice of logs also matters: the manufacturing process and product design depend on the diameter of the source material. A rather thick piece of log can serve as the basis for a chair with a back. Logs of a smaller diameter will require more cuts and other furniture styling.

The simplest version of carpentry work with a log as a starting material would look like this: take a log of a suitable diameter, measure the desired height of the seat and make a cross cut in this place. A piece of log is installed vertically, optionally treated with impregnation from decay, polished, varnished, etc. It turns out an ordinary stool like a stump. The base can be made in the form of a chair with a solid back.

Related article:

Benefits of wood furniture Species diversity models, their structure and purpose. Choice according to style. Manufacturers overview.

The number of stages of log processing increases, and the requirements for the diameter of the source material increase:

• from the edge of the log, as in the first case, the desired seat height is measured, in this place a cross cut is made, and not completely, but approximately 2/3 of the thickness;
• the height of the back of the chair is outlined, the necessary part is completely cut off;
• a vertical cut is made from the upper end of the cut to the border where the seat is indicated.

Followed by cosmetic treatment creative work above the product: leveling or deepening the back, grinding, firing, impregnation, etc.

Useful advice! To create a chair with a back from a solid log for cutting, a material is selected large diameter. Otherwise, an uncomfortable chair with a mediocre seat and an uncomfortable back will come out of a narrow log.

Huge logs from which a comfortable one piece chair, - it is a rarity. You can not search for wooden giants, but take more narrow material, saw it lengthwise and construct original wooden chairs from several parts. How to make such models, it is recommended to look on the Internet for a photo of wooden chairs with your own hands. You can get inspiration from the videos you watch or make your own original sketch based on the material that is already available.

How to make a wooden chair with your own hands: drawings, tools, assembly

Creativity will be present in any projects involving the manufacture of products with your own hands. You can make a chair out of wood using templates and drawings from the Internet or come up with your own interesting design based on them. In any case, there are basic rules for the production, processing of wood and elements that must be observed.

For a standard hard chair you will need:

• measuring tools - a ruler or square, tape measure, a special construction pencil for marking, level;
• rifled equipment - hacksaw, jigsaw, miter box;
• processing tools - chisel, planer, mallet;
• assembly tools - screwdriver, hammer, self-tapping screws, carpentry glue;
• materials for finishing- sandpaper of different grain sizes, varnish or stain.

Initially, a drawing is being searched for a chair of identical design. You can make developments based on your own measurements, however, with insufficient experience in carpentry, there is a high probability of error or significant shortcomings. There are two main models of chairs on the Internet - with a straight back or a more ergonomic inclined part. The first option is easier to perform, but in the second case, a convenient and reliable product is obtained, similar to the factory one.

Useful advice! When preparing several symmetrical parts, the first sample is made according to the drawings, and the subsequent ones are made according to the first sample (as in a template). In this way, an exceptional identity of the parts can be achieved.

Let's get acquainted with step by step instructions making a standard chair with a back. First you need to carefully study finished drawing or think of your own. It is necessary to prepare bars of the required length for the front and rear legs of the chair. There are options when all 4 legs are the same height or the rear legs can be much longer, combining their own height with the height of the back. The legs are cut from a flat profile or bent - it all depends on the design.

In each blank for legs, it is required to drill holes at the same height from the bottom to install the base and grooves for reinforcing horizontal jumpers. Next, the jumpers themselves are cut, observing the length indicated in the drawing, plus be sure to add 2-3 cm from each end to organize the mounting spikes. You should be careful about the same dimensions and make the connecting nodes as accurate as possible so that the structure does not “walk” during assembly.

From edged board cut out the back of the chair. On the inside hind legs under its fastening grooves are made. It is easier to fix the back with self-tapping screws, while the fasteners are not twisted immediately, but after a preliminary shallow reaming, so that the beam does not crack during assembly.

The seat for the chair is made, like the back, from an edged board or furniture board. In size, it should protrude slightly beyond the edge of the installation frame. Before mounting the seat, the chair frame should be additionally strengthened with diagonal slats.

The finished parts of the chair are sanded with sandpaper and varnished to final assembly. The varnish should be carefully distributed so that it does not flow into the grooves intended for the spikes, otherwise it will be impossible to glue the parts. When the varnish dries, you can finally assemble the chair.

Wooden chairs with upholstered seat, with armrests and armchairs

There are several ways to increase the comfort of chairs created in your own workshop:

• complicate the design and make wooden chairs with armrests;

• slightly change the assembly order and make wooden chairs with a soft seat and back;
• instead of a chair, you can make an armchair with your own hands, but not a massive, but a lightweight model, which, for example, would be appropriate in an Art Nouveau interior.

Adding armrests to the design of the chair is easy. It is necessary that they fit into the overall design, located on comfortable height and do not unduly restrict seat space. Perhaps, when adding armrests, it will be necessary to completely revise the assembly of the chair, radically change the drawings and think over a different type of connection of all parts. However, armrests are worth giving due consideration to in a wood chair design project. Photos of original finds and ideas that have already been implemented can inspire your own non-trivial projects or show in which direction you should look for your own style.

You can make wooden chairs with your own hands comfortable furniture with padded seat and back. Most often, plywood with a thickness of 4-6 mm is chosen as the basis. For a softening layer, furniture foam rubber, felt, polyurethane foam, latex, etc. are taken: 4-6 cm of total thickness will be enough, density - 30-50 kg / m³. It is better not to consider synthetic winterizer and batting as a filler at all, since these materials are quickly crushed. The packing is cut according to the drawings of the chair and indented along all cutting edges up to 20 mm downwards. Sheathing products can be bright and decorative or perform a purely practical function. As an upholstery, special furniture fabrics, leatherette, eco-leather or genuine leather are used.

Combining soft seat and a design with armrests, you can make a computer chair with your own hands. A novice master will not be able to make a product with an adjustable back, but convenience, stability and reliability are quite achievable.

Useful advice! The assembly of all parts of the chair is pre-assembled dry. Only after careful adjustment of the parts, glue is applied and the final installation is carried out.

Solid wood chairs: reliable and solid

Making a chair from solid wood with your own hands is financially more profitable than from lumber. The array is cheaper, but it must be taken into account that the products from it are bulky and rough. For country interior such furniture will good choice. It can also be placed in an apartment, but only in a smaller version - for children. Environmental friendliness of the material and sustainable design are paramount characteristics of children's furniture. solid wood ideal for these requirements.

Children's tables and chairs are made of moderately soft wood. Usually try to use birch. The choice of material is due to the fact that all corners of the furniture must be rounded for the safety of the child, and with a wood species that is malleable to processing, this is quite easy to do without specialized machines. Often, some elements of the array are replaced with plywood. It allows you to reduce the cost of furniture, make the product lighter in weight and add design details that will be of interest to the child.

Increased requirements are set for all surfaces of children's furniture. They are especially carefully polished and treated with varnishes without toxic odors on water based. Similarly (according to the high level of safety) paints are selected. Ideas and drawings on how to assemble a wooden high chair with your own hands, you can learn from construction and other thematic sites on the Internet.

How to make a folding wooden chair yourself

A folding chair is the second seating device after a stool in terms of practicality and convenience. It can be used at home, in the country, take with you on a picnic or fishing. The product is easy to transport and easy to store. There are enough pluses in the application, however, making a folding chair with your own hands can cause concern that incorrect calculations will not allow the structure to transform correctly.

Do-it-yourself folding chairs made of wood or plywood. An array for such products is not purchased, because due to its heaviness, the advantages in lightness and mobility are lost. Do-it-yourself drawings of folding chairs are very popular on the Internet. If you wish, you can watch a video demonstrating the manufacturing process and choose a model with a back various shapes or without it at all. To assemble one of the popular samples, you need to prepare:

• legs 4 pcs. from a bar or board (40x20 mm) 470 mm long;
• crossbeams for sitting 4 pieces. from a bar or board (40x20 mm) 320 mm long;
• prolegs 2 pcs. - cut out the same as the crossbars for sitting (40x20x320 mm);
• boards for sitting 2 pcs. (90x20 mm) + 2 pcs. dimensions 60x20 mm, the length of all 4 blanks is the same - 350 mm;
• fastening tool - 6 pcs. bolts (6x40 mm), self-tapping screws 45-50 mm long.

The assembly of the chair begins with the processing of all parts and rounding the ends. Then the legs of the chair are crosswise connected with bolts. The connection point is located 60-100 mm above the middle of the parts, so that the structure is more stable. It is necessary to pay attention to the symmetry so that both rear legs are external, and the front legs are internal. Bolt heads and nuts are sunk. The crossbars of the seat are bolted to the assembled crosses: to the external parts - from the outside, to the internal ones - from the inside.

At a level of 100 mm from the lower edge of the legs, they are fixed with transverse strips (prongs), secured with self-tapping screws on each side. The seat is formed from boards that fit in the following sequence: wide, narrow, narrow, wide. The distance between the boards is 15-20 mm. At the final stage, the product is varnished or painted.

Useful advice! To make sure the drawing and calculations are correct, make a preliminary layout of the chair out of cardboard.

Some Useful Ideas for Folding Chair Designs

A folding chair can be made with your own hands as an armchair. This requires finding suitable design and choose from several models more comfortable. This will be the seat and back soft filling, but the issue of comfort is completely solved by additional pillows and small mattresses.

You can assemble the original garden chair-chair made of wood with your own hands. The drawings of the folding model are very simple. From the materials you will need a bar of the same section (45x30 mm), strong galvanized wire and brackets for its fastening. It is required to carefully cut blanks of a given length, maintaining symmetry:

• seat - 6 pcs. length 375 mm + 2 pcs. 875 mm long for the rear legs of the chair;

• separators - 9 pcs. 228 mm long to create a transitional section from the seat to the back;
• back - 4 pcs. length 787 mm + 2 pcs. length 745 mm + 2 pcs. 1050 mm for front legs.

The assembly of the chair consists of combining parts according to the scheme in a checkerboard pattern. To fix all the workpieces into a single structure, holes are drilled at the same distance from the edge into which the wire is threaded. Its free ends are fixed on the outer part of the chair with metal brackets.

The frame of a folding chair made of wood is always made, which contributes to the reliability and stability of the furniture. For the back and seat, combinations of materials are possible. Most commonly used very dense fabric. The result is an ergonomic, lightweight chair like a chaise longue.

There are other options when holes are made at the same distance along the backrest guides. A strong twine is threaded through them, and free space for the back is filled with weaving from this twine.

Do it yourself wooden chair You can, without having any carpentry experience at all. Modern Instruments, ready-made drawings and instructions allow you to perform work quite accurately. Over time, skill will increase, which means that more refined and exclusive models will be obtained.

Factory "Sedie&Tavoli".More than trademark producing tables and chairs. This is a large team that develops and creates its products for you with love!
The furniture that is in the range is perfect for both home interior, and will fit perfectly into the interior of any restaurant, and will also help create cozy atmosphere in coffee zones in shops and offices.
In the production of tables and chairs, only high-quality materials are used, so the factory's products will delight you for many years!
Production is based on the most modern technologies. The factory approaches its work responsibly and carefully controls the quality of its products, thanks to which the furniture is comparable in terms of durability, practicality and aesthetic style with the leading manufacturers of both Russia and Europe.

Furniture Mark

In just a few years, a factory from a small furniture shop has grown into a fairly large enterprise, with its own sales network and serial production.
The products of the factory became in demand not only in our region, but also other neighboring regions showed interest in this species furniture.

Decor Classic

Factory "Decor Classic" has been a manufacturer since 2004, with more than 5000 sq.m. production capacity, European equipment and more than 100 staff members. During its existence on the domestic furniture market, the factory has constantly developed its infrastructure, expanding and improving the quality of its products. In 2010, a department for the production of solid wood furniture began its work. The enterprise is focused on the production of high-quality upholstered and dining furniture.

TechComPro

The TekhkomPro company is the largest manufacturer of tables and chairs made of valuable breeds trees - will change your idea of ​​Russian premium-segment furniture. Our furniture is a high profile synthesis of global trends furniture production perfect Italian design, high-quality domestic materials and years of experience work. It will add respectability to any restaurant / cafe, emphasize the status of office space, give a comfortable luxury to an apartment of any footage, complement the interior country house providing comfort. We are proud of our products and consciously emphasize their quality. All furniture is produced on unique equipment using only high-profile paintwork and finishing materials.

Quinta-Furniture

Solid beech furniture is the main direction of the company. Furniture factory Quinta is a powerful production base that produces furniture for the dining group.
Specialists of the enterprise made a great contribution to the production of chairs from natural solid wood. They have developed new models of dining furniture: dining tables, dining tables with stone, transformer tables, transformer tables with stone.
It has become a tradition for them to use latest materials that meet European standards. Application environmentally clean materials – main principle which they strictly adhere to.
You can easily pick up chairs from solid wood with padded back, solid wood chairs with a hard back, solid wood chairs.
The seats and backs of the chairs are covered with beautiful imported fabrics from well-known manufacturers. When finishing wood, a multi-layer paintwork Italian company Milesi.

LNK Furniture

Enterprise LNK Mebel is a high-tech production with great potential for development. The company specializes in the manufacture wooden furniture from solid beech - tables and chairs.
LNK Mebel produces more than 30 types of tables and chairs from natural solid wood and fine veneer. The range of products is regularly replenished and updated. Fittings are used in the production of tables and chairs European manufacturers. All products are covered by Italian polyurethane varnishes water based. All materials from European suppliers comply with the strictest environmental standards and are certified by the European Commission.

Electroplating

OJSC "Fabrika Galvanik" is the largest enterprise in the north-west of Russia, producing metal furniture with galvanic coating (nickel-chrome), tables based on laminated chipboard.

Armos

Brand "Armos" managed to gain popularity among buyers of orthopedic products. A serious approach to the quality of the supplied products and their compliance with the needs of customers have allowed the company to gain a leading position in the Russian market in the shortest possible time.
Mattresses "Armos" are made using modern high-tech equipment, which is purchased from leading manufacturers. We use materials that meet the highest standards of quality and environmental friendliness. Particular attention is paid to the process of multi-stage control of the entire production line, as well as testing finished product. Wide selection mattresses and mattress toppers "Armos" allows you to choose the most suitable model mattress, as well as a cover for it, which can give a feeling of additional comfort.

Domoteka

DOMOTEKA is one of the leading manufacturers of kitchen tables and chairs in Russian market, starting its history back in 1989. At present, the factory successfully produces and wholesales kitchen tables and chairs for over 15 years.