Many families prefer to make repairs relying on own strength and without resorting to the services of specialists. This also applies to photo wallpapers. But in order to properly stick them on the wall, you need to know the basic rules and stages of this process.

Installing photo wallpaper is not a complicated procedure, however, it requires care and attention.

To figure out how to hang photo wallpaper on a wall so that the design does not move or get damaged during the gluing process, you should know some of the features of this process.

Necessary materials

Before we figure out how to glue photo wallpaper on a wall, let's find out what materials and tools you need to prepare. This is very important because at some stages of gluing you will not have time to search for them.

Therefore, prepare in advance everything that may be useful to you:

• themselves photo wallpaper. By the way, when buying photo wallpaper, immediately think about where you will glue it, what size and texture the pattern should be. Sometimes, if you make the wrong choice, you have to change the photo wallpaper, and this is an additional cost;
• glue. You can consult with a consultant in a specialized store: he will select the optimal option for the texture of the wallpaper and the conditions of the room;
• stationery or wallpaper knife. It will be needed to trim the protruding parts of the photo wallpaper or trim some ends;
• tassels. Because using a brush on inner surface glue will be applied to the photo wallpaper; it is advisable to carry out this procedure as quickly as possible, so the brush should be as large as possible. And in order to glue the joints, prepare a small brush;
• pencil. With its help, you will make marks on the photo wallpaper itself and on the surface of the wall;
• level, tape measure or straight edge to maintain correct proportions, check horizontal and vertical lines;
• ruler, block or other flat surface. With their help, borders for photo wallpaper will be drawn on the wall;
• rags or a rag. They will come in handy if the glue comes out on front side wallpaper;
• rubber roller. With its help, the wallpaper will be correctly distributed over the surface. In addition, the roller will help get rid of bubbles and air accumulations under the glued photo wallpaper.

By the way, depending on the area where they are located, think about how to glue the photo wallpaper as simply as possible. For example, to hang photo wallpaper at height, you need to prepare a stepladder or a stable chair.

Modern ones will not disappoint you: this high-quality and durable coating is represented by a variety of photo wallpaper collections German manufacturer for all rooms without exception.

Read about the possibilities and design variations of a children's room with photo wallpaper. Many photos depicting bright and non-standard options decorating a child's room.

Selecting glue

How to stick photo wallpaper on the wall so that it lasts as long as possible? In this matter, the glue itself, on which these photo wallpapers will stick, plays a very important role. Undoubtedly, not all options are suitable for photo wallpaper, because they can have negative impact on the texture and the drawing itself. Therefore, many consumers are wondering what glue to use to glue photo wallpaper.

Quite often used for these purposes Quelyd brand glue, Contact Vinyl and Methylane. They are quite high quality and have a low cost, so they are great for gluing photo wallpapers.

In some cases glue is included with the photo wallpaper, but this amount may not be enough. Moreover, for greater reliability it is worth applying glue both on inner side photo wallpaper, and on the wall itself. On each package of glue you can see information about the proportions in which it should be diluted.

Remember! For dense and thick photo wallpapers, it is necessary to use a thick adhesive mass so that after gluing they do not bunch up and adhere well to the wall.

When choosing a suitable adhesive, pay attention to some of its properties:

• moisture resistance(such glue will prevent the appearance of fungus);
• glue color(it should not leave marks on the surface of the wallpaper);
• no strong unpleasant odor;
• drying time(of course, the faster the glue dries, the better).

Please note that high-quality glue is offered not only by foreign, but also domestic ones. Therefore, the price of gluing photo wallpaper will not be excessively high for you.

Stages of the gluing process

You can find it in almost any photo wallpaper package detailed instructions about how to properly glue photo wallpaper. But since in some cases it may be absent, we suggest that you familiarize yourself with the intricacies of this process. This information will be especially relevant for those who have made photo wallpapers to order and want to find information on gluing photo wallpapers with their own hands.

Before you begin the actual sticker process, you must decide on which wall glue photo wallpaper. If you choose photo wallpaper on non-woven or vinyl based, then perhaps they can hide surface imperfections.

But how to glue paper photo wallpaper so that the unevenness of the wall does not appear through them? For this the wall must be carefully prepared. The presence of unevenness, cracks, and roughness is not allowed.

Many people are interested in how to stick photo wallpaper on wallpaper, but we want to warn you right away: you can't do this. The wall must be cleaned of previous wallpaper and the remnants of the previous coating must be removed.

Important! If the process of removing old wallpaper was difficult and you had to wet the surface of the wall with water, wait until it dries completely. Do-it-yourself photo wallpaper can only be applied to a dry surface.

To make the color of the photo wallpaper as bright as possible, the surface of the wall is painted snow-white water-based paint. Further the wall is primed and puttied.

Pay attention to the room temperature. Before and after the gluing process, there should be no drafts in the room, and the temperature should not exceed 25 degrees.

When the wall is ready, we begin preparing the photo wallpaper itself. Lay them out on flat surface and carefully examine the drawing.

All parts of the picture must match each other in color. Even if there is a slight difference between the shades, such a pattern on the wall will spoil the entire interior. Therefore, do not glue it, but take it to the store and ask for another option.

It is advisable to purchase a completely different design, since sometimes the entire batch of photo wallpaper may be defective.

Besides, make sure that at the joints components the picture matches. In some cases, after gluing the photo wallpaper, about 2 mm of the joints will have to be cut off (if the photo wallpaper was glued overlapping). But the manufacturer warns buyers about such features in the instructions attached to the roll.

Advice: How to glue photo wallpaper to the wall if the individual parts of the picture are different from each other? If you are not afraid to experiment, and you have no desire to return them to the seller, you can try to make an original one out of them.

If everything is in order with the picture, all that remains is to figure out how to properly hang photo wallpaper in your room. To ensure that the drawing is glued evenly, it is necessary to make markings on the wall in advance. Lay out the photo wallpaper on the floor or table, identify them - and draw the appropriate borders right at the place where you plan to stick them.

If the drawing consists from several parts, you need to start marking from the sheet that will be located closest to the window. But how to properly glue photo wallpaper if there is no window in the room? Start with the fragment that is located in the middle of the bottom of the image or from the top extreme sheet.

To answer the question of how to stick photo wallpaper, let's look at the main stages of this process.

Stage #1: Glue is applied to the reverse side of the canvas or a separate fragment. Then leave the wallpaper for a while (about 10-15 minutes) so that it soaks. At this time, the glue can be applied to the wall.

Remember! The wallpaper should not get wet, otherwise it will stretch or tear. Therefore, it is important to use only thick glue or not to let it soak at all (in the case of paper photo wallpaper).

Stage #2: Focusing on the boundaries drawn on the wall, begin gluing fragments of photo wallpaper.

Stage #3: The applied pattern is smoothed using a roller or other devices. This is done in order to align the image fragment, release air and get rid of excess glue. To clean your hands of glue, use a dry cloth.

Read about how to choose the best ones: Choose a themed image for your child that matches his or her hobbies or passions.

Stage #4: Since photo wallpapers are usually glued overlapping, after completing this process it is necessary to cut off the excess details of the image. In addition, it is necessary to make cutouts in the places where the sockets are located.

Stage #5: If necessary, apply to the surface of the drawing protective layer or a special film that prevents exposure to moisture, light and temperatures.

Attention! It will be much more difficult to glue photo wallpaper with a ready-made adhesive layer, so it is better to invite specialists for such procedures.

If some stages of this procedure remain unclear to you, we suggest you watch a video tutorial on how to glue photo wallpaper. You may notice others as you browse. important details the process of gluing them:

In this article we told you how to properly apply photo wallpaper. Undoubtedly, this information will help you in practice, but your accuracy and attentiveness to the process will play an important role. We hope that the process of gluing photo wallpaper will not be too difficult for you.

To admire beautiful paintings and landscapes, it is absolutely not necessary to go to distant countries. You can create an unusual look at home. In this case, costs will be kept to a minimum. It's about about photo wallpaper. If you choose the right picture and place it successfully, then you can enjoy every day interesting interior rooms. But there's another one important point- this is a sticker. We will look at how to properly glue photo wallpaper in this article. Practical advice will help even a beginner in this matter cope with the task and get the desired result.

Photo wallpaper

Today, in specialized stores you can find a huge range of finishing materials, among which photo wallpapers occupy not the least place. There are also many types of pictures:

• landscapes;
• animals;
• marine theme;
• night species;
• cartoon and fairy-tale characters;
• space and much more.

The abundance of rich colors and colors can dazzle everyone’s eyes, so you should select a painting carefully and thoughtfully.

Note! Most often, in a photo wallpaper design, one (primary) color predominates, and another (contrast) shades it. This is exactly what should be repeated in other decorations on the walls and ceiling. For example, if the choice fell on an autumn landscape, then it would be most appropriate to place it among an interior in brown shades and light furniture.

Another factor to consider when purchasing is the variety:

• non-woven;
• paper;
• self-adhesive;
• three-dimensional.

3D photo wallpapers occupy a special place in interior fashion. In most cases, they are made to order, so this type of finishing should be classified as an exclusive European-quality renovation. But, if you decide to take this step, you will undoubtedly get an amazing and non-standard design a wall from which the image and objects will flow directly into the space of the room.

Note! When giving preference to three-dimensional photo wallpaper, be careful with the design of the room, and also do not forget about the lighting, which will add great effect.

Preparatory work before gluing

In most cases, all types of photo wallpaper have a thin base, so it will not be able to hide existing defects on the wall. To avoid the appearance of defects, it is recommended to first carefully prepare the base, and only then proceed to the next stage. The process of preparing the surface for gluing finishing on a wall is no different from preparing for painting:

• padding;
• puttying;
• cleaning with an emery mesh;
• re-priming.

While the surface is drying, you also need to take care of the tools that will be needed during the work process:

• metal ruler;
• roulette;
• level;
• pencil or felt-tip pen;
• stationery knife;
• plastic spatula or rubber roller;
• tassels (narrow and wide);
• soft, lint-free cloth;
• high stool or stepladder.

Note! It is impossible to paste photo wallpaper onto old wallpaper, since after drying the pattern of the lower layer will be visible through it.

Glue

Glue is also important in this process. You can’t buy the first one you come across or the cheapest one. To apply photo wallpaper you will need a special composition. It is worth noting here that there are several varieties depending on the basis of the finishing material. For example, paper photo wallpapers must be glued with glue intended for paper backing. This rule will allow you to make the right choice.

In addition, consider a few more tips:

1. Domestic products are no worse than imported ones. The main thing is to choose a high-quality and trusted manufacturer.
2. The glue should not have a strong or unpleasant odor.
3. The label should indicate that the glue is moisture resistant.
4. The manufacturer will also tell you how to dilute the glue correctly: all information is indicated on the packaging.

Note! There is one general rule for all types of wallpaper, including photo wallpaper: the thicker it is, the thicker the adhesive solution should be.

Sticker process step by step

To consider in detail the process of how to stick photo wallpaper on a wall, you should divide the entire technology into separate sections. The first of these is marking, which will result in a picture with clear and regular lines. To complete it, you need to lay out all the sheets of the composition on a clean floor, aligning the edges. Markings should be applied from the window. Using a plumb line and a pencil, mark the first element. The same steps should be repeated for subsequent fragments of the picture.

Note! When marking is done correctly, the horizontal and vertical lines should form an even angle of 90º.

After all the markings have been applied and the glue has been prepared, you can begin gluing, armed with a roller and brush:

1. We trim the white margins around the perimeter of the photo wallpaper with sharp scissors or a stationery knife.
2. Lay out the fragments of the drawing on the floor covered with newspapers, face up. The first element should be at the very top.
3. Turn it over and apply thin layer glue with a brush. Special attention We pay attention to the edges. It is recommended to apply glue to the wall as well.
4. Carefully place the first sheet according to the markings.
5. We smooth the fragment with a roller or spatula, starting from the center to the edges, expelling air and excess glue.
6. Immediately blot off any remaining glue with a sponge.

We repeat the same algorithm of actions for the following fragments, carefully combining the pattern.

Note! To ensure that photo wallpaper lasts as long as possible and does not fade, you can apply a protective layer from ultraviolet radiation.

Photo wallpaper on a self-adhesive backing

The above-described gluing process is suitable for all types of photo wallpaper, except self-adhesive ones. Many people think that gluing them to the wall is much easier. But, as practice shows, this is absolutely not the case. If almost everyone, even a beginner in repair and construction, can handle ordinary photo wallpaper, then with self-adhesive you will have to work hard and put in more effort. Even one wrong step or action can spoil the result and disrupt the integrity of the picture.

Self-adhesive photo wallpapers have a protective paper layer. After it is removed, it is necessary to quickly and accurately place the fragment on the prepared surface. You should also be very careful, as the sheet can curl and stick together, after which it will be impossible to peel it off. It is recommended to remove the backing in stages: unscrew about 5 cm from the top, place it relative to the markings and, smoothing it out, carefully remove the remaining part.

Note! The glue that is used in self-adhesive photo wallpaper dries and breaks down very quickly when in contact with air, so all actions must be precise.

If you perform all the steps correctly, the painting on the wall will delight all family members and guests for a very long time. In addition, owners will be able to proudly display the work completed with my own hands. Along the perimeter of the photo wallpaper, you can stick a foam plinth in the form of stucco molding and install decorative lighting.

Video

Instructions for gluing Anti-Marker wallpaper:

IN Everyone knows that paper photo wallpapers are the most difficult to hang. They:

• are easily damaged
• you need to apply glue to the wallpaper itself, not the wall (although this is not necessary, you can do it the other way around, it’s even easier)
• they dry out and come apart at the seams,
• the seams will still be visible, so paper wallpaper It’s better to glue them with an overlap (if they have an edge).

But, they are cheap and beautiful! Although you will be exhausted working with them, or you will pay decent money to the craftsmen (from 400-500 rubles per m²) for gluing. But let’s get started and find out how to hang paper photo wallpaper on a wall with your own hands, learn the technology and nuances of gluing.

Content:
1.
2.
2.1
2.2
2.3
2.4
3.

Preparation for gluing paper photo wallpapers

The walls for gluing paper photo wallpapers must be prepared as much as possible (!), they must be as smooth and as even as possible (plastered), well puttied, sanded and primed. When gluing photo wallpaper with your own hands, there should be perfect cleanliness, since any squeak or hair from a roller or brush will appear on such wallpaper. In general, you have to try hard if you want to get a quality result.

Before gluing, walk your hand along the wall, remove any possible debris, squeaks and hairs!

Unlike photo wallpapers on a non-woven basis, especially those that have a certain surface texture and hide many of the nuances of preparing the base, with paper photo wallpapers everything is more complicated.

Well, it seems clear that you need to CAREFULLY prepare the wall for paper photo wallpaper! Let's start gluing.

Gluing paper photo wallpaper to the wall

First of all, let’s stock up on tools, and, of course, the photo wallpaper itself. Here → https://fotooboi.biz/ is big choice photo wallpapers and if you haven’t purchased them yet, be sure to visit this site. And don't forget the glue!

Tools

Of the tools you will definitely need (but, again, not a fact, situations vary) will be needed:

• a construction or stationery knife with replaceable blades (will be necessary for trimming wallpaper);
• a pair of clean, dye-free cloths (ideally white waffle towels, to remove glue residues from the wall, floor and hands);
• a rubberized roller for gluing wallpaper (it is not recommended to use plastic spatulas, as they can damage paper photo wallpaper (!), although it may come in handy);
• a roller for applying glue, preferably foam rubber, since it will not leave lint on the wallpaper (you can use a poppy brush);
• wide metal spatula (will be needed for trimming wallpaper under the fillet - ceiling plinth and in corners);
• laser level, or plumb line, or bubble level(if the bubble level is small, you need a long, even strip to go with it, ideally as a rule, but, for example, a sheet of laminate will do, the main thing is that the strip is level) - used for marking the wall;
• a simple pencil (for marking);
• a bucket or basin for mixing glue, it is advisable to also have a tray for a roller;
• a chair or stepladder if you work at heights.

Decorating walls with photo wallpaper is a great way to change the interior of a room without special effort. The main conditions for such a transformation are the careful selection of a picture that will decorate the house for a long period, and its high-quality application on the wall.

Many people take on the task of hanging photo wallpaper on their own. How not to spoil the expected effect? You need to know how to glue photo wallpaper - the video at the end of the article will definitely help. In it, a specialist will show all the stages that will be discussed in the article.

How to stick photo wallpaper: prepare everything you need

There's nothing complicated about this kind repair work. Making walls with photo wallpaper with your own hands means saving on calling professionals, but also subsequently boasting a little to your friends about your ability to cope with complex problems. finishing works. In fact, there is nothing complicated, the main thing is to take your time and do everything carefully, strictly in order.

What you need to prepare to properly hang photo wallpaper:

• a ruler with smooth edges or a level, a tape measure, a pencil;
• sharp stationery knife;
• special rubber rollers for wallpaper;
• comfortable brushes – large, wide and small;
• clean, dry rags;
• stepladder

What glue should I use to glue photo wallpaper?

Due to modern views photo wallpapers are made from various materials, then the glue must be selected specifically designed for specific type finishing.

There is a rule that always applies when wallpapering: the thicker the wallpaper, the thicker the glue for gluing it should be. It is recommended to buy glue from the same company as the finishing materials themselves.

The most popular adhesives for photo wallpaper are universal species For vinyl wallpaper– Quelyd, Quelyd Express, Methylane and “Contact Vinyl” - for gluing joints. The amount of glue should be such that it is enough to apply both to the wallpaper and to the walls. Double lubrication will ensure easy joining of the blades.

The glue should be diluted according to the instructions and just before starting work. A set of photo wallpapers that you purchase in a store will always come with an installation guide. Even experienced craftsmen should not be ignored in order to end up with a perfect picture on the wall.

If you specifically ordered a specific large-format photo, then the company’s representatives will always kindly tell you about all the nuances, since it is in their own interests. If you are satisfied with the result, you will definitely tell your friends about it, who may also become clients of a company that produces custom photo wallpapers.

Preparing the walls to hang photo wallpaper

The surface of the wall on which you want to properly stick photo wallpaper must be absolutely smooth and dry. There should be no unevenness; they will be very clearly visible if your wallpaper is too thin.

Be sure to wash off the dirt or even vacuum it. Get rid of the smallest fragments of old wallpaper.

A frequently asked question is: can photo wallpaper be glued to wallpaper? It is undesirable, even if the wallpaper is glued very well. It is unknown how finishing materials will behave when combined.

If the previous wallpaper is too dark or has a variegated pattern, then all this will be visible through the new layer of photo wallpaper.

For better reproduction of the plot, if it is made in light colors, I need to paint the wall White color water-based paint. Wait until it dries and apply primer. There will never be color distortion on a white wall.

It is always easier to cover a wall whose dimensions match the dimensions of the wallpaper. If the picture has a smaller area, then next step work will be drawing lines for correct location all fragments of photo wallpaper.

Pasting photo wallpapers in stages:

1. All panels have white margins, which should be carefully cut with a knife to fit a ruler (scissors cannot make it perfectly straight). Thanks to this we get a seamless picture.
2. We draw vertical lines and other auxiliary marks on the wall.
3. Spread newspapers on the floor or plastic film, on which we will lay the wallpaper face down.
4. We apply glue to the wall, and then to the photo wallpaper, which, after coating, should be folded with the pattern inward and left to soak for 5-10 minutes, but no more, so that the paper does not come apart.
5. We paste the first panel strictly according to the marks, without distortions.
6. Air and possible excess glue should be removed from under the wallpaper - to do this, smooth the strip with a roller. We prepared rags only for wiping hands, and photo wallpapers should not be smoothed with a rag, as the design may be damaged.

1. The following strips are best glued from left to right. The second strip is overlapped so that the images on both panels align exactly. Carefully handle it with a roller, rolling it well to the wall.
2. Using a knife and ruler, we make an accurate cut along the alignment line. Both strips must be cut from top to bottom.
3. Discard the cut edges. Using a small brush, coat the joint where the strip was cut from. Smooth the joints.
4. We repeat these operations with all fragments of the drawing.
5. We apply protection to the photo wallpaper from moisture, sunlight and other negative influences.
6. There should be no drafts in the room, the window should not be opened until everything is dry.

There is a false statement that it is better to buy self-adhesive photo wallpaper for the wall. If you are new to this area, you will easily damage them. You must have sufficient skill and an assistant. These types of wallpaper have paper protection, which you need to act quickly to remove. The adhesive layer sets very quickly and is easily destroyed. The defects that arise are almost impossible to correct.

As you can see, pasting photo wallpaper is not very difficult. If you feel that you can’t handle it, then it’s better to first practice regular wallpaper, the gluing of which has the same features.

Photo wallpaper is a unique material that allows you to quickly and effectively transform a room and add a certain atmosphere to it. Select a suitable picture the right size- not a problem now. The problem, rather, will be that the existing choice will simply make your eyes run wide. All this is complemented by the possibility custom made wallpaper based on a given picture or photograph.

Correctly selected photo wallpapers can turn quite realistically living room into a piece of the coast, a house near the mountains, or give the atmosphere of a cozy European cafe - depending on what plot is chosen. It is very important to choose the right picture so as not to get the opposite effect. That is why below we will dwell on such questions as how to choose photo wallpapers, what are their main advantages and disadvantages, and, most importantly, how to hang photo wallpapers.

Advantages and disadvantages

Everyone probably knows what photo wallpaper is - it’s an image on paper or another base, which is glued to the wall in parts, and in the end you get a complete picture for the entire wall or part of it. Photo wallpaper how to finishing material It has a lot of advantages, the main ones being:

• great appearance– photo wallpapers can imitate any landscape, still life, convey a pattern or even a photograph, thereby enlivening the room and giving it a certain mood;
• as already noted, the choice is simply huge, there is the possibility of individual orders;
• relatively quick way gluing, as well as relative durability. Thus, modern photo wallpapers are printed in such a way that they are practically not affected by sunlight and do not fade. Wallpaper can be glued with glue or be based on self-adhesive paper, so there is always a choice between several options. And the ability to coat photo wallpaper with varnish solves many issues of care and durability.

No matter how wonderful the aesthetic properties of photo wallpapers are, still without some shortcomings it didn't work out:

• Photo wallpapers require a perfectly flat and smooth surface - only then will they look as impressive as possible and last a long time;
• The process of gluing photo wallpaper, although it does not require special preparation, will still take some time and require attention, effort, perseverance and patience;
• some low-quality photo wallpapers may come off over time, and you will have to re-glue them every now and then;
• and, of course, the most important thing is not to make a mistake with the drawing, otherwise it will not bring pleasure, but complete irritation.

Selecting photo wallpaper

Concerning plot, then it would be stupid to advise anything here, because everyone designs the interior of a room at their own discretion. But some advice will still be appropriate. So, if you want to visually expand the space of the room, then it is better to choose photo wallpapers in cold tones, while warm ones are perfect if there is not enough space in the room. natural light. Depending on the purpose of the room, you can choose a specific theme, for example, cartoon characters for a children’s room, landscapes for the living room, and something delicious for the kitchen. It is important to coordinate the theme and colors with the interior.

Gluing overlapping photo wallpapers

Some photo wallpapers can be glued overlapping- This is also a very convenient way. After the first canvas is glued, you also glue the second one evenly and matching the pattern, and the edges will overlap each other. When the second fragment is already on the wall and a seam has been formed, you need to use a sharp utility knife to make a cut from top to bottom in the middle of the seam. Then the seam seems to open up, the excess in the form thin stripes are removed, a piece of the wall is coated with glue using a small brush, and the wallpaper is glued to the wall for good. Then everything is the same - the seam can be smoothed with a special roller. Many people note that it is in this way that photo wallpaper can be glued so that the seam is almost invisible, and this is very important for a textured material. You need to work with a knife clearly, but carefully so as not to damage the wall.

Next, pasting of the fragments continues in exactly the same way, taking into account the method used. If the photo wallpaper covers the entire wall, and you left a small part as allowance, then after completing the work, all the remains are carefully cut off with the same knife.

note that best results can be achieved if the room is kept optimal temperature– 18-20 degrees, humidity and no drafts. After the pasting work is completed, it is better not to ventilate or heat the room: such a taboo should be observed for at least 24 hours, and preferably 48 hours.

You need to devote a few words and self-adhesive photo wallpaper: Many people find that they are easier to work with because there is no need to use glue. However, this technique requires fairly high professionalism and preferably an assistant. After removing the paper protection, you need to work very quickly, since adhesive layer dries and sets very quickly. In this case, there is practically no chance to correct possible defects.

Possible defects

After a day, you can find some defects on the finished surface, although they were not there before. There may be several reasons for this.

Thus, most often they are formed bubbles, common cause which is a lack of glue, uneven smoothing of the wallpaper, uneven application of the primer, as a result of which the glue is simply absorbed into the walls. Temperature changes may also be the cause, but there is only one solution - you need to try to pierce the bubble with a syringe with glue and squeeze it out a little, smooth it out with a spatula. Carefully wipe off excess glue with a sponge.

Wallpaper can move away from the edges in the corners: the reasons may be the same as in the first case. Then you need to carefully cut with a knife and once again glue the places where they came off. Angle is generally enough problem area, and the joint here will most likely be visible.

Protecting photo wallpaper with varnish

Since photo wallpaper is still not the most reliable and resistant material, then to give it greater durability and a cleaning effect, you can use varnish to coat the finished surface. It is recommended to use any varnish on water based. Inexpensive option– Tex Pro varnish, it is available in glossy and semi-matte versions, has a characteristic smell that disappears after a few hours. A more expensive option is Multi-Brilliant Finish M LEF, which has a matte finish and is odorless.

The varnish is applied with a brush in several layers - optimally 2-3 layers. At least 1 hour should pass between each re-application. After the first layer has dried, you can rub it with a soft brush to create a small, effective shine, and repeat the procedure with each subsequent layer.

In conclusion

As a rule, caring for such coating does not cause difficulties. Photo wallpaper can be carefully wiped with a damp cloth, and if the paint has worn off somewhere, then paint on the missing fragment with a pencil. At proper care Photo wallpapers can last a long time on the wall, pleasing the owners, but it’s best not to use them near a source of constant splashes and drops of grease.