Renovating a bathroom in an apartment is no less important than any other, although many people think about it in last resort. It is the bathroom that greets us in the morning with an invigorating shower, creating a wonderful mood, and escorts us to the bedroom in the evenings. The design of a bathroom should be thought out to the smallest detail, but the main role, of course, is played by the decoration of the room, which sets the tone for all subsequent design. For decades, it has been customary to paint bathroom walls or decorate them with ceramic tiles and, it should be noted, such interiors are already quite boring. Plastic panels are modern finishing materials. They appeared on the market only in the early 2000s, but are now a popular material in many design solutions.

Features and Benefits

Plastic panels are ideal in a modern way finishes for bathroom decoration. This room is characterized by a special microclimate - there is high humidity, temperature changes, and accumulations of limescale that require constant cleaning. The material for finishing the surfaces of the room must be selected based on these conditions. Why are plastic panels for the bathroom so good? To understand, let’s consider their main characteristics, namely:

— Excellent endurance in high humidity conditions;
— The panels can withstand temperature changes without being deformed;
- Easy to clean - just wipe them with a damp cloth from time to time; you can use any detergents and cleaning products. Particularly good in this regard are seamless panels that do not have joints where dirt and plaque can settle;
— Plastic can be used to cover not only the walls, but also the ceiling, the space under the bathtub and sink, which makes it possible to decorate the room in a single image;
— The panels are easy and quick to install, without requiring alignment of the walls, as they hide all the imperfections;
— If the finishing components break down, it is easy to replace the fragment with a new one without undertaking a global repair;
— The cost of plastic panels is much lower than others facing materials for the bathroom, for example, ceramic tiles.

In addition to all of the above, it is worth noting that plastic panels provide great opportunities for decoration - they can be laid in different directions, decorated with patterns, stickers, combined with other finishing materials (paint, tiles, textured plaster). At the same time, the material has a drawback - low strength. However, along with all the advantages, it turns out to be insignificant, and replacing a broken element, as mentioned earlier, will not be difficult.

Types of plastic panels for the bathroom

Plastic panels are presented on the market in a wide range. One of the classifications divides them into wall and ceiling, the latter being less thick and durable, but also lighter in weight. If you plan to cover the entire bathroom with plastic, then the panels should differ in texture - glossy walls will match matte ceiling and, conversely, to textured walls better to choose shiny ones ceiling panels.

Depending on the size and mounting methods

Plastic panels come in three main types, each of which differs in size and shape. The following types can be used for bathroom renovations:

Slatted canvases - have a great resemblance to lining, reminiscent rectangular boards. Modern models are equipped with special locking connections according to European standards. Although the joints are well sealed, the seams are still clearly visible. Most often, slatted canvases are produced white, although color options are not excluded;

Tile panels are similar in appearance to tiles, are quite lightweight and are often used to form patterned compositions. They are presented in square or rectangular elongated shapes, which can reach sizes of 80x400 cm (used for finishing large areas);

Sheet is the most popular type for decorating bathrooms. Basically, they are sold with a pattern already applied, which folds together during installation, like a puzzle. The canvases are attached one after another without much difficulty.

The choice of one type of panel or another depends on the intended design of the room, which must be carefully thought out in advance. When finishing, you can also find various combinations that bring significant variety to the interior.

PVC textures for the bathroom

Plastic panels are presented in two main types of surfaces - matte and glossy. Matte canvases have a stylish modern look, are able to successfully imitate wallpaper and natural materials such as wood and stone. They are pleasant to the touch and quite durable. It is on matte canvases that various designs are applied.

Glossy, coated with a special varnish that gives a special shine, thanks to which they fit harmoniously into modern interiors. Such panels are often used in small rooms, as shiny surfaces contribute to the visual expansion of space.

Plastic 3D panels for bathroom

An innovative material is plastic panels with a 3D pattern, which look quite luxurious, original and presentable. Their peculiarity lies in the three-dimensionality of the image, creating the effect of “animated” walls. By finishing the bathroom with this material, you can visually expand the space and divide it into zones. Drawings can be completely different: patterns, ornaments, geometric elements, images of flora and fauna.

Design ideas

In this section we will look at the various possibilities for decorating a bathroom with PVC panels. It is worth noting that the choice of light colors will significantly increase the space at the visual level. If you lay the lamellas on the walls vertically, the room will appear taller, and if horizontally, it will appear wider. The beauty of bathroom wall decoration plastic panels will successfully emphasize mirrored or slatted ceiling, creating the effect of a stylish environment.

Plastic panels with a pattern

A monochromatic bathroom design may seem boring, especially when the room is quite spacious. In this case, drawings will come to the rescue, adding variety to a boring environment and taking part in zoning. The design on the panel can be applied with paints or using the modern photo printing method. You can use paintings to decorate the wall above the font, sink, or create real masterpieces called murals.

Pasting with film and stickers

Another way to add variety to the interior of the bathroom is to cover the plastic panels with a picture-film or use vinyl stickers, which can be purchased on sale or made to order. Decorating the walls in this way is quite simple - you can do it yourself without involving specialists. Right choice suitable pattern will support general style registration If you want to change the design concept, the pasted images can be easily removed from the surface and new ones can be applied.

Color combination

If the images on the panels are not included in the design scenario, the emptiness of the interior can be diluted with a combination different colors and panel shades. This method is good both for decorating a space and for zoning it.

It is important to combine palettes correctly here. For example, the blue color harmonizes perfectly with white, black and its own shades - this design is ideal for a Mediterranean style or a Provence bathroom. Beige and brown are combined with a yellow and sand palette - these colors are often worn classic interiors. Red shades themselves are quite contrasting - it is better to dilute them with white or cream elements. Gray metallic finish is characteristic of modern minimalism and high-tech style. A wonderful tandem will be obtained in a combination of gray with white and black. Green color panels in the bathroom will evoke reminders of nature and will merge in an ensemble with a brown, golden palette.

Imitation of wood and decorative stone

Panels designed to look like wood will be an excellent option for decorating a bathroom in rustic style. The overall picture can be complemented by rough wooden furniture, combined with cotton curtains with floral patterns. PVC panels with imitation bamboo will perfectly fit into the ethnic style.

Imitation decorative stone typical for luxury interiors. The drawing can imitate different kinds natural stones: malachite, marble, topaz and others, having a smooth or embossed surface. This design is often used for classic-style bathrooms.

Tile panels

Those who remain committed to the aesthetic beauty of tiled finishing can opt for panels that imitate it. The choice of such material is quite large, and the cost is much less. Today you can choose a wide variety of PVC fabrics for the bathroom, including those with patterns and prints. Imitation mosaic masonry is perfect for Mediterranean style or oriental theme.

Glass and metal decor

The combination of simple plastic panels with decorative elements made of chromed metal and mirror surfaces is inherent in modern minimalism. There is no need to rack your brains over the choice of parts - the role of metal will be successfully performed by plumbing fixtures (faucets, hoses, taps, etc.), selected to match the style, and mirrors themselves are an integral part of any bathroom.

Plastic panels for the bathroom - photo

Plastic panels can transform a bathroom beyond recognition. Especially for you, we have selected the best photographs of bathroom decoration using this practical and inexpensive material. Using these examples, you can see the high aesthetic qualities of finishing a bathroom with plastic panels, and also choose the option you like for your own home. Enjoy watching!

The bathroom is considered one of the most important rooms housing, since it is in it that the day of all family members begins and ends, therefore, in order for it to be not only comfortable, but also beautiful, its design must be given Special attention. Today, there are many finishing materials with which you can create an original bathroom interior, but they deserve special attention Wall panels PVC. They perfectly protect the room from moisture, give it an aesthetic appearance and are easy to install.

Properties: pros and cons

PVC panels are a unique cladding product that is made from polyvinyl chloride and is used to decorate rooms with high humidity. The material contains rock salt and elements of petroleum products. Thanks to special manufacturing technologies, these components are converted into an ultra-strong polymer that is resistant to high temperatures and has excellent performance characteristics. In addition to the main raw materials, various additives are also used in the PVC production process, which provide the panels with color, porous structure and high protection from moisture.

The main advantages of this material include:

• Affordable price. This type of cladding is considered budget-friendly and anyone can afford it.
• Huge selection of colors and textures. The market is represented by products of various colors, which not only imitate natural material, but are also decorated with photo printing.

• Durability. Since polyvinyl chloride is a waterproof product, it prevents the formation of mold and mildew on the surface of the finish, thereby increasing its service life.
• Good thermal insulation and sound absorption. The internal structure of the material is designed in such a way that it retains heat and external sounds well, this is very important for bathrooms. In addition, during installation work, a frame is installed, on which another layer of insulation can be additionally laid.
• Environmental friendliness. The raw materials from which the material is produced are absolutely safe for human health.

• Quick installation. It is quite possible to carry out all the work on assembling and covering the structure yourself, without having any special skills. In addition, you do not need to use a special tool for finishing. Thanks to wall panels, you can also hide all connections, wiring and engineering systems, providing the bathroom with stylish look. Sheet plates are flexible, so they can be easily attached both horizontally and vertically at any angle.
• Easy to care for. To clean the finish from dust and dirt, simply wash or wipe the plastic with water. No special cleaning agents are required.
• Possibility of installation without preliminary surface preparation. The walls and ceiling that are planned to be sheathed with PVC do not need to be plastered and leveled, since the frame is attached to them and after finishing all the flaws will be hidden. The most important thing is that the facing surface is dry and clean.

As for the disadvantages, wall panels are fire hazardous, subject to deformation at temperatures below -18 degrees and, when installed, slightly reduce the space of the bathroom. The disadvantage of the products is their low strength, due to which they are not resistant to scratches and chips. Installation in rooms where direct sunlight penetrates, which has a detrimental effect on the finish, is not recommended. But, as a rule, bathrooms do not have windows, so this drawback can be eliminated.

Kinds

IN Lately for implementation design ideas in the bathroom, many owners of houses and apartments choose PVC panels, as they allow you to create any style, giving the room a modern look.

This material is available in several types:

• Rack and pinion. It is also called plastic lining. This PVC has standard length the slats are 300 cm and 10-12.5 cm wide, the slats are equipped with special grooves, so they are installed exactly like siding. Depending on the model range rack plastic, they can have wide or narrow locking systems, which you should pay attention to when choosing. It is usually used for cladding bathroom ceilings, but the slats are also well suited for cladding wall surfaces. Thanks to the longitudinal or vertical placement of the plates, you can achieve a visual expansion of the room. Plastic lining is traditionally made in a single color or imitation wood with colored edging; it is resistant to moisture, but can be deformed when exposed to low temperatures.

• Standard. It has the form of smooth panels 260-300 cm long and 25-37 cm wide. The product design includes tongue-and-groove locks, which allow for quick installation and create a solid, durable coating that does not allow moisture to pass through. Such plates can be either color, with photo printing, or with imitation tiles. These panels are much stronger, but their installation is more difficult.

• Sheet. They are large in size, but thin lamellas 4.05 m long and 2.03 m wide. They are characterized by a special device and consist of two layers of plastic, between which longitudinal jumpers are built. Finishing with the material is usually done end-to-end, after which the seams are filled with sealant to match the color of the coating. It is best to do the sheathing using glue on a leveled base, but sometimes installation is carried out on the sheathing. Sheet products come in different colors and textures, but require special technology installation and careful operation.

photos

Depending on how PVC is attached, products are divided into seamless, chamfered and with a relief surface. The seamless type is often used for finishing ceilings. During installation decorative elements are placed tightly to each other, resulting in a minimal seam. If the installation technology is carried out correctly, then the connections between the slabs are almost invisible and the finish takes on a holistic appearance. In addition, continuous patterns can be created using seamless panels on the ceiling and walls.

The material, made in the form of a chamfer, is in many ways similar to seamless lamellas, but unlike them, there is a chamfer in the end part of the product. It is a decorative recess that allows you to connect panels into one sheet. PVC with a chamfer is also called rusticated panels; they can be purchased both for cladding walls and ceilings. If you need to get a stunning effect in wall decoration, then it is best to choose a material with a relief surface. It looks like lining and has high wear resistance and strength, but compared to other types it is much more expensive.

Dimensions

PVC wall panels are ideal for bathroom decoration. They have a convenient rectangular shape and a reliable connection system that makes installation quick and easy. Today on the construction market you can find products that differ not only in design, but also in size. Therefore, before starting installation, it is important to accurately calculate the area of ​​the room and determine the material consumption, taking into account its size.

Usually standard width lamellas correspond to the dimensions of ceramic tiles and range from 20 to 30 cm, the length can reach 3 m. The thickness of the products ranges from 3 to 10 mm. These indicators, as a rule, depend on the type of panels and may change. Thus, slatted PVC has a width from 0.13 to 0.3 m, a length from 0.9 to 3 m, wall PVC is produced respectively in widths from 0.15 to 0.5 m and lengths from 2.6 to 3 m. There are wide tile-type panels are also on sale, their parameters are 0.3-0.98 cm.

To decorate the bathroom, it is recommended to choose products with a width of at least 10 cm; they are equipped with a wide “European” lock or a narrower one, which is called “polka”. Typically, such PVC has a double profile design, is available in a single color and is easy to install. If you purchase material with a width of 15 to 50 cm, you will have to make a lot of effort to hide the seams. If the installation is done with your own hands for the first time, then it is best to give preference to sheet plates with a width of 80 to 203 cm, a length of 159 to 405 cm and a thickness of up to 30 mm. Such slabs are quickly attached and create an ideal finishing surface.

Design and decor

Polyvinyl chloride is a plastic raw material, so during the production process it produces not only durable, moisture-resistant, but also beautiful panels, which are produced with a relief pattern, smooth or matte surface. Decorative panels They go through several stages of processing and, depending on the method of application, the compositions are laminated, offset and heat-transfer. To extend their service life and improve their appearance, they are also additionally coated with varnish. Both matte and glossy plates with a frieze are perfect for toilet and bathroom design. They do not fade and do not lose their properties under negative impact detergents and humidity.

To obtain exquisite interior in the bathroom, it is recommended to choose seamless slats, the design of which is applied using thermal transfer film. Images of various themes are applied to the panels using a special rotating cylinder under high temperature, after which they are covered with a protective layer. Unusual patterns and landscapes made by artists will become a real decoration of the room. Ceiling panels with flower patterns look especially interesting in this design.

If the style of the room provides for more natural and restrained notes, then the right choice There will be offset PVC, the compositions in this case are applied to the surface of the products using paint from a printer. Imitations like “wood”, “thread” and “panda” are extremely popular. This type of finish looks no less attractive when it comes to natural stone. Laminated material also deserves special attention, which is difficult to distinguish from the texture of fabrics.

Since absolutely any image can be applied to the surface of plastic, recently in modern design both photo printing, geometric patterns, and images under brickwork or tile. There are also products with reflective film, which have a mirror effect and visually increase the space. But their cost is high, so many homeowners choose perforated sheets with a relief pattern that has an extruded surface.

To make the bathroom interior beautiful, you need not only to choose the right color, but also the texture of the finish. For small rooms You cannot use finishes with voluminous compositions; it is best to give preference to discreet monochromatic colors. If the area of ​​the room allows, then you can show maximum imagination and create an unusual style, filling the space bright colors and patterns.

Criterias of choice

The most important moment when decorating a bathroom is the purchase of material, on which not only the strength and durability of the finish will depend, but also the interior of the room.

Before choosing panels, you need to consider the following points:

• In order for the cladding to reliably serve for many years, it is best to buy panels that have several jumpers. The more stiffening ribs, the more reliable the product. Do not use material with deformed locks and jumpers.
• The appearance of the panels plays a huge role. If they are of high quality, then they are characterized by clarity of the pattern and uniformity of color. In addition, you should make sure that when joining the elements, the image will turn out perfect. No displacement is allowed. There should also be no waves or other flaws on the surface of the plastic.
• Quality is also considered equally important. lock systems. When fixing, no gaps are allowed between the panels.
• In the case when the material does not correspond to the dimensions specified by the manufacturer, it is worth considering the possibility of making a purchase, since in the future you may encounter other problems during installation.
• For showers, you need to purchase panels with increased moisture resistance, since they are most susceptible to water and fumes.

To ensure safe operation of the finish, it is recommended to purchase products that have the appropriate certificates. Even the highest quality plastic materials can emit toxic fumes, so the choice should be made from well-known and trusted manufacturers and not save, as this is fraught with the appearance of various diseases.

Installation Features

PVC installation It’s not difficult to do in the bathroom, so it’s quite possible to do it yourself, without the help of specialists. Since the products are equipped with special connections, they can be installed without much difficulty on the sheathing or attached to surfaces using glue. In this case, in the first case, you will only have to make a frame, and in the second, carefully prepare the base. First of all, it is necessary to sheathe the ceiling, and then the walls. Thanks to this technique, the process of decorating corners and joints will be simplified.

Before covering surfaces, false panels for counters should be pre-made, which will provide constant access to them without dismantling the finish. It is also necessary to provide for the installation of special heat reflectors in the room for the dryer and radiator. If this is not done, the heat will directly hit the panels and the plastic will quickly lose its original appearance: it will bend and turn yellow. In addition, it is important to consider the issue of accessibility of outlets. Selected for them comfortable spot and holes are pre-cut in the casing. This also applies to the ceiling trim. Attachment lines for lamps are drawn along its surface.

Preparation and components

It is recommended to perform PVC cladding in rooms with temperatures above +20 degrees. Before vinyl panels and their guides are left in the room for several days to acclimatize the material. Then measurements are taken and markings are made for all fastening systems and holes that will protrude beyond the boundaries of the ceiling and walls. These can be built-in windows, cabinets, doorways and ventilation grilles. In addition, additional fasteners must be made for hanging equipment.

Once the planning and design choice has been resolved, preparation of the surface itself for finishing begins. The walls and ceiling are thoroughly cleaned of previous cladding, dust and dirt. It is also important to check that there is no fungus or mold on the base. If there are any, they are treated with antifungal and bactericidal agents. As for plastering the surface, it is optional.

To install the panels, you should also ensure that you have all the necessary tools and components. This is, as a rule, a standard set consisting of a level, a hacksaw, self-tapping screws and an electric drill. Depending on the installation method, you will additionally need wooden beams, metal profiles, staples, fastening clips or glue.

Installation methods

Today, there are several methods for installing PVC panels, with the most widely used being installation on lathing. Frame structure assembled from both metal profiles and plastic or wooden beams. If wood is chosen for the sheathing, it should be treated with antiseptic agents in advance. The frame usually uses standard metal profiles, and the size of wooden and plastic beams should not be less than 4x2.5 cm. They are attached to the wall and ceiling with screws, observing a step of 40 cm.

The sheathing strips must be fixed perpendicular to the direction of placement of the panels. Moreover, regardless of whether it will be suspended ceiling, panel or screen, the cladding can be done both vertically and horizontally. The choice usually depends on the features of the room and style. But it is worth noting that vertical installation has its advantages. It ensures unimpeded flow of water downwards. This is especially important when covering a shower stall. As for vertical installation, then it contributes to the visual “movement” of the walls.

When assembling the sheathing, the structure should be additionally strengthened in the corners with supports, for which small sections of panels are used.

The installation process is as follows:

• Finishing begins from one of the corners of the room or from the door. First of all, fix the starting corner; it is attached to the surface with staples or nails. Then, using a fastening system, the first panel is installed, which is nailed to the frame.
• The next step is to install the second panel; it is placed adjacent to the first and thus the cladding is continued to the next corner.
• At the end of the covering, the finishing corner is attached and the final panel is inserted into it. The joints between the elements are carefully coated with sealant and installation of ceiling or floor plinths begins.

No less popular is the installation of PVC on special fastening clips; for this, a durable frame is first made. In cases where there are significant unevenness on the surfaces, plastic or plywood gaskets are placed under the planks and profiles and secured with self-tapping screws. Similar to the first method, the inner corner is secured with clips near the door or in one of the corners, after which the first plate is inserted into the profile. Then a second one is placed in its groove and secured with clips. Then everything continues according to the previously described scheme.

If the bathroom is small, then frame installation for her it is not considered the best option , since the design reduces the usable area of ​​the room. Therefore, for small bathrooms, panels are most often installed frameless, using glue. The only disadvantage of this technology is that it requires ideal flat surface, so the ceiling and walls have to be well prepared for covering. To secure the material, you should purchase special adhesive mixtures that do not contain organic solvents, as they have a detrimental effect on the plastic. A suitable means for this is “liquid nails”; no more than one can of them is required per 5 m2.

Installation of panels with glue is carried out in several stages:

• First of all, dry the working base well using a heat gun or a hair dryer. Then the surface is primed with an antiseptic.
• After this, the walls and ceiling should be leveled so that differences do not exceed 3 mm. The presence of minor tubercles and cavities is allowed; they can be easily cut off with a grinder. Great attention is paid to the joints in the corners. They must be strictly perpendicular, otherwise installation work will become more complicated, creating problems with fastening the initial and finishing planks of the frame.
• When the base for finishing is ready, apply glue to the panel, leaving a small distance from the edge, and apply it to the surface level, pressing for 5 minutes until the adhesive mixture sets. Sheathing elements that are adjacent to the floor and ceiling are cut, fastened with dowels and decorated with baseboards.

Care

Any type of finishing requires careful care and periodic cleaning, and PVC panels are no exception. Unlike other decorative materials, they are resistant to aggressive agents, so they can be washed and cleaned not only with water, but also with special compounds containing lime, acids and alkalis. It is advisable to do this at least once a year. To thoroughly clean plastic-lined walls and ceilings from dust and dirt, simply wipe them with a damp cloth soaked in a solution of water and detergent. If traces of dirt remain after this, you can use a soft brush and clean everything again.

Do not forget that plastic is subject to deformation at low temperatures. and may lose its original appearance when exposed to direct rays of the sun and heat sources. Therefore, to prevent the panels from turning yellow and bending, protective screens are placed in the bathroom near radiators and windows. In addition, the casing must be protected from mechanical damage, as it is easily scratched.

Design ideas

In modern bathroom design, finishing options using PVC panels are extremely popular. A room decorated in this way takes on a stylish and beautiful view. Decoration is most often done with slatted or panel plastic, samples of which are presented in a wide range color scheme and texture. Slatted PVC is well suited for covering ceilings in a small bathroom; thanks to them, the interiors turn out to be original, and even a nondescript “Khrushchev” can be transformed into a cozy and spacious room. For bathroom design, it is recommended to create unique compositions by combining bright colors. An unusual solution Finishing with panels imitating leather, granite or wood is considered; it will be interestingly complemented by edging with ornaments.

Bathtub wall panels are among the most popular and modern design options for rooms with high humidity levels and frequent temperature changes.

Such finishing material presented in a wide range and allows you to bring to life the most daring design solutions.

Properly selected wall panels for the bathroom have a huge number of advantages compared to traditional construction and finishing materials:

• increased resistance to excess humidity;
• resistance to temperature changes;
• low risk of fungal infection and mold formation;
• no corrosive changes;
• ease of self-installation;
• no need to level the wall surface or undergo complex preparations before installation;
• wide choice of shades and textures;
• the ability to create coatings that imitate expensive natural materials;
• ease of cutting materials in any direction, which facilitates facing difficult areas;
• ease of maintenance during operation;
• excellent wear resistance;
• guaranteed durability of the finish and preservation of the original appearance;
• resistance to fading under the influence of ultraviolet radiation;
• the ability to easily disguise all imperfections of the wall surface and perform hidden wiring;
• affordable price.

The main disadvantages of wall panels are a reduction in usable area in the bathroom, and the risk of dents or cracking due to mechanical impact on the surface.

Despite a large number of positive characteristics, application finishing panels often needs improvement ventilation system, which entails some additional material costs.

What bathroom panels are there?

Currently, the domestic market of modern building and finishing materials offers all kinds of wall panels, which do not differ very much in their basic performance characteristics, but have quite significant differences in appearance and functionality.

Bathroom finished with MDF panels

Bathroom finishing panels are:

1. leaf type;
2. rack and pinion;
3. tiled.

Among other things, the panels differ in the material used in production.

An affordable alternative to ceramic tiles in the bathroom is polyvinyl chloride panels. have some advantages, because they are easy to install, they are moisture resistant and durable.

The installation procedure for the bidet installation is described.

Do you want to know how to choose the right moisture-resistant panels for wall decoration in the bathroom? Read by choice.

Peculiarities

There are several most popular options that are more or less suitable for finishing rooms with high humidity levels:

• Wall panels based on valuable species natural wood, represented by maple, alder, oak, cedar and even wenge. This finishing option is environmentally friendly, but is not very well suited for use in wet rooms, so it must be applied to the finished surface. protective layer varnish, wax or oil, which allows you to repel dirt and water.
• Chipboard panels made using wood chips and glue are often labeled as moisture resistant. As a rule, such a characteristic is a simple marketing ploy by the manufacturer, so this option for covering the wall surface in the bathroom is very short-lived.
• Hot-pressed fibreboards are characterized by higher strength compared to chipboard finishing, which is due to the presence of wood fibers in the composition. Installation of such finishing in the bathroom is quite acceptable, but only in areas that do not have direct contact with water.
• Decorative wall cladding with MDF sheets, made by dry pressing based on finely dispersed wood waste, has proven itself very well. Such finishing slabs are able to withstand significant loads, are resistant to exposure to moist air, and also have high heat-insulating and sound-proofing properties.
• Wall panels based on high strength quartz glass have an attractive appearance and excellent physical characteristics, represented by strength, as well as resistance to adverse external factors.
• Hardboard finishing based on modern and durable panels made from high-strength types of plastic, it is affordable, and is also characterized by durability and a high level of resistance to excess humidity and temperature changes in the bathroom.

Wall panels look like tiles

Beautiful bathroom design using wall panels

Particularly popular is a relatively new and unusual finishing material, represented by three-dimensional wall panels or so-called “fashion sheets” with a very original texture reminiscent of natural stucco.

The most accessible finishing option When decorating walls in rooms with high humidity, traditional PVC wall panels for the bathroom (plastic) still remain, differing in pattern, as well as length and width parameters.

When choosing wall panels for a bathroom, it is necessary to take into account not only the size and appearance, but also quality characteristics, the main of which are hygroscopicity indicators.

Quality

Before purchasing finishing material, it is necessary to carry out a thorough visual inspection of the wall panels. High-quality panels are characterized by uniform coloring and also do not have external defects such as cracks, chips, scratches and any abrasions.

Option for wall cladding with panels

The panels to be installed must have the tightest possible connection between each other, forming an inconspicuous seam.

It is optimal to purchase wall panels whose surface is covered with a special protective film, which is removed immediately after installation.

Dimensions

Modern wall panels can differ not only in appearance and design, but also in size:

• Sheet models They are fairly large elements that are easy to install and most often have a pattern or image already applied. This option is in great demand for decorating the most difficult areas from the point of view of operation, including the bathroom. The length of the element is no more than 2.4 m with a thickness of 3-6 mm.
• Rack and pinion models thanks to convenient sizes, can visually slightly enlarge a small bathroom space. Visual effect It also makes it quite easy to increase the height of the ceilings. The length of the element is no more than 3.7 m with a width of 12.5-30.0 cm and a thickness of 8-12 mm.
• Tile type models ideal for creating mosaic-style wall decoration. This type of cladding panels can easily replace coatings based on natural stone and wood, decorative plaster, as well as other modern or traditional materials. The length of the side of the element is within 30-100 cm.

The variety of parameters of wall finishing panels allows you to install such elements in bathrooms that differ in height, length and width.

Sheet panels for bathroom

As a rule, fiberboard materials are used as the main raw material for finishing wall boards, which are most often supplemented with eucalyptus additives, oils and other natural components, which has a positive effect on their strength, stability and durability.

Most often, so-called “seamless” panels with dimensions of 25-37x260-300x1.0 cm are used to decorate the surface of walls in rooms with high humidity.

Price

The average cost of finishing panels can vary depending on the size, appearance and source material.

The following collections are especially popular:

• tree;
• textures;
• divorces;
• wallpaper.

The price of a high-quality slatted panel starts from 120-150 rubles, and a laminated panel starts from 180 rubles. The category of the most expensive options includes cladding with panels with a 3D effect.

In recent years, finishing has increasingly been carried out using affordable PVC panels, which are the best option in terms of price and quality.

Features of self-installation

The easiest way is to decorate the walls yourself with traditional PVC panels. There are several options for installing and fixing wall panels in the bathroom. Most often, a special adhesive is used for this purpose, which is applied to the panels in thin and winding lines. First, the panels and moldings are adjusted to the size of the room, after which the starting strip is installed, and the panels are glued one by one.

Installation diagram of panels on guides

A less common option is to fix the trim using guides. In this case, depending on the type of finish, the sheathing strips can be fixed not only in a horizontal, but also in a vertical position. The first and all subsequent moisture-resistant panels must be installed using the tongue-and-groove method.

No less convenient is the installation of wall panels using special plastic guides. Clips, which have a special “mustache” for securing the edges of the panels, are pre-installed into the groove part of the plank, which is fixed to the wall surface.

.

The edge of the subsequent mounted panel reliably hides the clip, which allows you to get the most even and neat surface, very attractive in appearance.

Experts in the field of finishing rooms with high humidity levels recommend improving the waterproofness of wall cladding based on PVC panels by applying silicone sealant on the ridges and grooves of finishing elements during installation.

Video on the topic

Every year, plastic panels for the bathroom are becoming increasingly popular among finishing materials. If previously tiles were considered the best option for decorating bathroom walls, now they have a competitor worthy in all respects. We are talking about plastic wall panels, which are ideal for rooms with high humidity, that is, for bathrooms and kitchens.

Repair is a troublesome and very expensive business. For this reason, many people try to save money in every possible way. cash and simplify this process. For this purpose, manufacturers of materials for interior decoration came up with a lot in various ways and periodically supplement the range with more advanced products.

They are so convenient and practical that some apartment owners use them in places where there is no particular humidity, but the coating on the walls must be good and durable. It's about about narrow corridors and hallways.

Bathroom panels with patterns are very popular

And yet, the most common decoration with plastic wall panels can be found in bathrooms. The popularity of this type of finishing materials is well justified. The panels are easy to install and are much cheaper than tiles. The price of bathroom panels, the photo of which is located just below, depends on the quality and the manufacturing company. At the same time, plastic perfectly withstands both high humidity and sudden temperature changes, remaining in its original form.

An additional advantage is the color range offered by manufacturers. Wall panels for the bathroom are so diverse that every (even the most demanding) buyer can find something he likes. Bathroom panels with patterns, for example, in the form of marble, granite and other natural materials, are very popular. Often, in addition to the walls, a screen is installed under the bathtub in a similar color scheme. This is very convenient and makes it possible to hide communications behind a kind of screen.

The panels are easy to install and are much cheaper than tiles

Nowadays, wall panels are used as often as tiles. However, the first option can often be found outside the bathroom. If it is customary to mainly lay out only the apron in the kitchen with tiles, then plastic panels can be used to completely decorate the walls. It is very convenient, practical and looks very good.

Bathroom wall panels made of PVC are chosen for their numerous and undeniable advantages. Plastic has a high level fire safety, since modern materials do not support combustion. At the same time, the moisture resistance of the panels is very high. This type of material will not allow moisture to pass through, which will eliminate the possibility of rotting. With moisture and fairly high temperatures, PVC panels do not deform.

The undeniable advantage of plastic is that it perfectly tolerates both high temperature, and low, for this reason, it can be used even in rooms where there is no heating.

Plastic has a high level of fire safety

The service life of plastic panels is much longer than that of other materials that are often used to decorate bathroom walls. PVC will last even longer than tiles, not to mention ordinary paint and wallpaper. Moreover, plastic is an environmentally friendly material. It does not release toxins even with significant heating.

And yet, most owners decorate the bathroom with plastic panels, a photo of which can be seen below, because of the affordable cost. Thus, renovations in the bathroom and toilet will cost much less than using tiles. The ease of installation of plastic panels cannot be ignored. Their installation does not require complex tools, and the work itself takes place in relative cleanliness, which is very rare during repairs.

A bathroom finished with plastic panels will not only last a long time without the need for refurbishment, but also has a beautiful appearance. Depending on his preferences, the apartment owner can choose the most suitable texture and color.

A bathroom decorated with plastic panels will last a long time and has a beautiful appearance.

Types of plastic panels

Before you start choosing plastic for renovation, you need to decide on the type of PVC panels for the bathroom, since this type of finishing material is sold in several variations.

Slatted panels have a narrow and long shape. They can be installed vertically or horizontally. Depending on the type of installation, the bathroom can become either wider or visually elongated. This is convenient for adjusting a small or very low room.

PVC panels in the form of slats are sold in various colors. At the same time, experts recommend not stopping at one shade or structure. With a little imagination, you can create something special from slatted panels that will delight apartment residents and surprise guests. Often slatted plastic panels are used to decorate a bathroom in a high-tech style.

Slatted panels have a narrow and long shape

Plastic panels for the bathroom in the form of tiles are considered more convenient than slatted ones, since they are small and their installation is extremely simple. If necessary, you can choose plastic panels from 30 centimeters or more. There are also meter options. This type of panel is considered the most profitable, which is why budget-conscious owners choose it.

Here, too, it is not necessary to use only one color. PVC panels in the form of tiles look good if you lay them in a checkerboard pattern or create an unusual geometric pattern.

When a large wall is to be finished, it is most convenient to use sheet plastic panels. Their dimensions are designed in such a way that the number of joints is reduced to a minimum. This way you can significantly save on material. The only disadvantage of large sheet panels is that it will not be possible to combine different colors, so the room may turn out to be somewhat monotonous and boring.

Regardless of what type of PVC panels for the bathroom will be used, all these types of material have a high level of moisture resistance, maximum environmental friendliness and practicality, that is, they are easy to wash and clean. The big advantage of plastic panels is that they do not allow moisture to pass through, even at the joints. In addition, PVC materials create good heat and sound insulation.

Installation nuances

Experienced craftsmen know how much easier it is to work with plastic than with tiles. However, the installation of PVC panels has many nuances that you need to know about, and they should not be ignored under any circumstances. If a person does not have even the slightest idea of ​​how to decorate a bathroom with plastic panels with their own hands, it is better to watch the video that can be downloaded below. As a last resort, you can leave this work to professionals.

Installing plastic panels in the bathroom yourself is quite difficult and risky.

The most difficult ones to work with are tile and slatted panels. They will definitely need a sheathing, which is a frame made of metal or wood. It is attached to the wall using brackets, and then it will support the panels. With sheet panels everything is much simpler, since they can simply be attached to the wall. Sheets, slats and tiles are connected to each other using special fasteners.

To properly install plastic panels in the bathroom, you need to take into account some rules. First of all, you need to correctly calculate the distance between the frame slats so that the structure is as strong as possible. You also need to think about a way to make the joints more airtight. In addition, special covers are used that hide the places where the screws were used.

Experts say that installing plastic panels in a bathroom yourself is quite difficult and risky, since incorrect installation will only result in the waste of a rather expensive material.

The service life of plastic panels can reach 25 years

It is better to combine the installation of PVC panels for the bathroom with general renovations in this room and bathroom. Thus, having once taken care of the walls, ceiling and floor, you can forget about repair work in this room for a long time. Manufacturers of finishing materials claim that the service life of plastic panels can reach 25 years.

Experienced craftsmen recommend immediately renovating the bathroom not only around the perimeter, but also taking care of communications, replacing plumbing fixtures and all kinds of fittings. An integrated approach will ultimately be cheaper, both in terms of money and the amount of wasted nerves.

Options for mounting plastic on walls

If the owner of the apartment has enough knowledge in the field of repairs, desire and free time, and plastic panels have already been purchased, it is worth thinking about the method of installing them. There can be several fastenings for PVC panels.

Evgeniy Sedov

When your hands grow from the right place, life is more fun :)

Content

In any apartment or private house, the bathroom is an important room in which a person spends a lot of time. In a place where it is constantly humid, it is necessary to use materials for finishing that can withstand harsh operating conditions. PVC panels are most suitable for this purpose.

What makes plastic bathroom panels different?

Wall decoration with plastic panels is aesthetically pleasing, practical, and resistant to deformation and temperature changes. A significant advantage of the material is its ease of installation. Any person can finish finishing with PVC panels for a bathroom without the involvement of specialists. This repair option will cost minimal financial investment. Positive traits material:

• no preliminary preparation of walls is required;
• it is possible to hide irregularities;
• easy to hide communication structures and wiring;
• cheap material.

Are there any disadvantages to bathroom wall panels?

Finishing PVC bathroom panels also has some disadvantages, the main one of which is the strength of the plastic, which is not high level. PVC sheets are susceptible to mechanical damage and can become deformed due to sudden temperature changes (more than 20 °C). If we compare plastic with ceramic tiles, it loses to ceramics in durability.

What types of PVC wall panels are there?

The finishing material made of polyvinyl chloride can be glossy, mirror or matte in nature. Wall PVC bathroom panels differ in the thickness of the plastic - the thicker it is, the stronger the finish will be. The material is also divided according to the method of applying decor and appearance. The basic option is white canvases covered with a matte texture. Glossy PVC is also popular, onto which a thin layer of colorless varnish is applied.

Among the texture and color options, we should note plastic, covered with decorative thermal film with various patterns or completely colored, to which the desired dye is added at the very beginning of production. Wall panels PVC does not differ much in size: the standard width varies from 15 to 50 cm, the length (height) has three sizes: 2.6, 2.7 or 3.0 meters. As for thickness, manufacturers recommend using 10-12 cm material for wall cladding, and 6-8 cm for ceiling cladding.

How to choose panels for the bathroom

Finishing a bathroom with PVC panels will look perfect if you carefully choose the material. When purchasing, you should visually inspect the cladding for damage (holes, cracks, chips). It is worth buying finishing material with a reserve, but all panels must be from the same batch. If you have to buy more of them, there is a high probability that the sheets will turn out to be different shades, even if they are of the same design and manufacturer. When purchasing PVC panels for the bathroom, you should consider some nuances:

1. Stiffening rib. The greater their number, the more durable and stronger the structure will be.
2. Geometry and seam quality. Connect two sheets. If they are made with high quality, the seam will be smooth, thin, almost invisible.
3. Color spectrum. When installing polyvinyl chloride panels effective area bath or toilet is reduced. Light shade will visually make a small room more spacious.

Where to buy and how much do bathroom panels cost?

Polyvinyl chloride cladding material can be purchased at a specialized hardware store or order delivery online using the catalogue. Products from different manufacturers vary in price. For example, inexpensive domestic PVC sheets can be purchased for 120 rubles/piece. Imported options, laminated with film, with photo printing or frieze, will cost more - from 500 rubles per m2. Also take into account the cost of accessories such as screws, slats or profiles, without which the repair will not be completed.

How to attach plastic panels to the wall

Moisture-resistant plastic panels can be slatted in the form of strips like lining, tiled in the shape of a square and wide sheets, which are easy to cover immediately large area. They are attached according to the same principle, but before installation it is necessary to calculate measurements and determine the condition of the walls. Only by taking into account all the non-standard elements and openings can you accurately determine in which direction the fastening will take place. Wall cladding with PVC sheets is done using:

1. Glue. This method does not require special effort, but the only condition is that the walls must be perfectly smooth. PVC sheets are carefully and evenly coated with glue and glued to the surface.
2. Nails, staples. To install the cladding in this way, you must first make a frame from wooden beams. They are mounted using screws perpendicular to the canvas with a distance of 50 cm. Next, from the corner of the structure, PVC sheets are attached to each other. The finishing sheets are fixed with nails or staples.
3. Mounting profile. This technology involves the use of special profiles (plastic, galvanized steel). The cladding is mounted to the wall in the same way as on wooden slats. The first and last panels are attached to the profile using a clip.