It is quite possible to make a wooden outdoor table for a summer house with your own hands. For this, ready-made or independently developed drawings are used. To make a beautiful wooden table yourself for outdoor use, you need to purchase high-quality material and follow the manufacturing rules.

A beautiful and comfortable country table is an indispensable attribute of a summer holiday. When choosing a finished product, you need to decide on the dimensions, as well as with the following parameters:

• using a piece of furniture outdoors or indoors;
• maximum amount people who can sit at the table;
• budget allocated for acquisition.

The tabletop and body of an outdoor piece of furniture can be made of different types material:

• plastic models are an ideal option for use in the country. The advantages are affordable cost, relative compactness and lightness. As a rule, they are produced in round or oval shapes and can accommodate approximately six to eight people. Despite the stylish appearance, are not very characterized for a long time operation. Disadvantages include the tendency to destruction as a result of the negative effects of direct sunlight. Also lightweight design can turn over in strong gusts of wind, the need to use the most flat surface possible for installation and susceptibility to damage, which is accompanied by a rapid loss of the original aesthetic appearance;

• wood models They look very organic even in a modern country landscape. Such pieces of furniture perfectly complement garden plantings. Such models belong to the category of quite expensive. The disadvantages of natural wood include the ability to collapse and warp under the influence of water and temperature changes, and the legs pressed into the soil can rot, which is why it is necessary to regularly treat with antiseptics;
• graceful metal models are distinguished by high quality and incredible durability. Such furniture looks especially beautiful against the background forged fences and decorative elements. Such tables are distinguished by considerable weight and also very high cost. Often modern models are a very successful combination of metal with wood or glass countertops.

If you plan to use the table in a summer cottage all year round, then the best option would be a metal structure, which is very resistant to any adverse external factors. Legs metal structure They can even be concreted, which will provide additional stability to the piece of furniture.

How to make a wooden table for your garden with your own hands

Tables made from wooden planks are often made independently. Of course, this option will require sufficient care throughout the entire period of operation, but it will give local area the dacha has a bright style and originality. Among other things, build the most simple models you can do it yourself with little time and money, even in the absence of professional skills and special tools.

Making a drawing of a table with dimensions

The self-assembly scheme may already be ready, but to get original table with the most suitable size and shape of the tabletop, you need to complete the drawing yourself. When drawing up a drawing, it is recommended to focus on the standard dimensions of such an item country furniture 178x95x77.5 cm.

Required tools and materials

To make beautiful and practical table made of wood for a summer residence, need to prepare:

• roulette;
• pencil;
• saw;
• drill or screwdriver;
• building level.

Work must be carried out using standard safety glasses and gloves. During production you need to use building materials presented:

• a pair of boards with dimensions 85x10x2.5 cm;
• a pair of boards with dimensions 153x10x2.5 cm
• four boards with dimensions 168x10x2.5 cm;
• four boards with dimensions 75x10x5 cm;
• board 95x10x2.5 cm - 17 pcs;
• fastening tools in the form of nails, screws and bolts;
• glue for woodworking.

It is also necessary to purchase antiseptic compounds for wood processing, wood varnish or special paint and brushes in advance.

How to make a table with your own hands (video)

Let's get started: making parts for a wooden outdoor table

All elements in the form of wooden boards must be smooth, of natural moisture, and made of high-quality hardwood. If necessary, before assembly, the boards must be leveled and, if necessary, sanded. To obtain durable design, the wood should be thoroughly treated with antiseptics.

It is not recommended to impregnate wood with oil compounds., which have proven themselves very well when used in conditions high humidity, but they increase the level of flammability and give the structure an unpleasant and fairly persistent odor that lasts for a long time. After applying water-soluble impregnations, it is recommended to always apply a layer of a special glazing antiseptic, which allows you to give high decorative properties product and contributing additional protection.

Assembly and fastening of main elements

At the first stage self-made wooden outdoor country table, the frame base of the piece of furniture is assembled. It is to the frame base that the boards will subsequently be fixed to create a tabletop and table legs. The frame base traditionally consists of four planed and smooth longitudinal boards measuring 168x10x2.5 cm and a pair of end boards measuring 85x10x2.5 cm.

Assembly should be carried out to the maximum flat surface, securing the end elements to the longitudinal boards using galvanized screws and adhesive. Very important prevent warping of the base during assembly and fastening. After checking the diagonal, additional boards 153x10x2.5 cm must be fixed, which will give the assembled structure additional rigidity, and will also hide the areas where the legs are attached.

The tabletop is assembled from boards measuring 95x10x2.5 cm. The boards can be fixed using either galvanized nails or self-tapping screws. Be sure to leave a gap of 0.5 cm between the tabletop elements. The legs are attached using self-tapping screws or bolted connections. The second option is more preferable and allows you to get removable model, convenient for transportation and storage.

Installing amplifiers is a guarantee of table durability

If there is a need to obtain the most massive and robust construction, then amplifiers are used. To install such parts, you need to turn the product upside down. The transverse reinforcements in the middle of the tabletop are nailed, and the corners of the amplifiers are sawed off to save space. A pair of reinforcements with a shaped cutout that follows the shape of the tabletop crossbars is nailed to the sidewalls.

How to protect your table from external factors

Adverse weather conditions, represented by sun, rain and temperature changes, are aggressive environment For wooden structure, used in outdoor conditions. To protect wooden products and extend their service life, special film coatings and various impregnating compounds are used. Most often used protective films based on polyurethane. The disadvantage of such a film coating is the loss of appearance, reduced efficiency and wear after a certain time. Wood protection impregnations are presented as a mixture based on oils and repellent solutions. Both options for protection from external adverse factors have proven themselves well, but require periodic updating.

Wooden outdoor table: drawing (video)

We make a wooden country table from what is at hand

A variety of available materials are often used as materials for creating a wooden country table. Incredibly stylish and very reliable tables made from slabs are an option that you can make yourself if you have some woodworking skills. In this case, you need to be prepared for the fact that the technology for manufacturing tabletops based on saw cuts is characterized by its own specifics and is quite labor-intensive, but the resulting finished product will be unique and inimitable.

The following structures look very original in garden design:

• made of wooden beams for true fans of natural materials;
• from several stumps or bobbins;
• from old window frames with a glass tabletop;
• from boxes supplemented with various decorative elements;
• from an old wooden chest with forged elements.

Tables made from pallets have also become quite widespread. The fashion for such products came from Asia, where such furniture items are often made for lack of available funds. When creating such an option, you can show all your imagination, but it is highly advisable to replace nails from pallets with self-tapping screws, and all fastenings of the frame and boards must be reinforced with special furniture corners. If desired, you can supplement the design with ordinary furniture wheels, allowing you to make the table mobile and easy to use.

How to make a metal table with a wooden top

One of the interesting and durable options for garden furniture. For self-production you will need:

• metal profile pipe or high-quality rolled metal of sufficient cross-section;
• primer for working with metal surfaces;
• paint on metal surfaces and brushes;
• chalk or light marker;
• flat surface for stencil;
• wooden tabletop;
• bars and adhesive to secure the table top.

The tool can be represented by a welding machine, grinder, metal saw, hammer, screwdriver, self-tapping screws and bolts. The metal is first cleaned of rust and dirt using a steel brush, after which a frame is created in accordance with the stencil.

Welding must be done carefully to avoid the formation of welding build-up. Wire brush The entire structure is cleaned, after which it is treated with a primer and painted. After the paint has completely dried, the tabletop is fixed, which also needs to be treated with special antiseptics, and then varnished or painted.

DIY log table (video)

Making your own country furniture from wood is a very interesting and creative process, accessible even to beginners. Such natural material goes well with metal, glass, and plastic, which allows you to create original, unusual and very decorative solutions with your own hands.

We continue to develop our summer cottage. Today we’ll talk about how and with what to fill dining area or a relaxation area. It is difficult to imagine a cozy gazebo or shady canopy without a table and comfortable benches or chairs.

Today, garden furniture manufacturers offer a huge variety of tables: large and small, wooden, forged, wicker or plastic.

Of course, you can buy a finished product, but many people prefer to make garden furniture with their own hands.

How and from what material to make a table and how to decorate the tabletop will be discussed in this article.

Outdoor table for a summer cottage made of wood

Undoubtedly the most pliable and environmentally friendly material is a tree. A wooden table can be made round, square, rectangular or irregular shape, it all depends on the size of the gazebo or the number of seats. You can use a regular stump as a tabletop leg.

The shape and appearance of the table largely depend on the style of your country house and exterior. A log house can be supplemented with furniture made from logs and boards. The main tool for processing parts is Sander, since the surfaces of the table top and benches must be smooth, without nicks.

The tabletop can be made from slats or narrow boards, strung on metal rods, or by connecting them using short slats.

A table made of wooden cuts looks interesting, especially if there is one on the site.

You can make such a table in several ways:

• connect the cuts together with staples or tongue and groove joints, forming a flat surface;
• secure the cuts to some kind of base (in this case, the parts must be of the same thickness to form a flat surface). The product must be sanded and varnished. If desired, the gaps between the saw cuts are filled with epoxy resin, after which dries, the surface is sanded again and coated with a protective compound.

Garden table made of wood with benches, made in a single design, looks great both in the gazebo and in the open area.

It's easy to make. Use the diagram below to make your own drawing and calculate materials.

When drawing up a drawing, consider some generally accepted standards:

• bench seat height from ground level – 400-500 mm;
• seat width – 300-400 mm;
• tabletop height from floor level – 700-750 mm;
• tabletop width – 580-900 mm.

The length of the table and benches is individual. The figure shows an example of making a table with benches located on two long sides of the tabletop. Similarly, you can make a structure with benches on four sides.

And here is an option for a small round table with stationary benches-stools for four seats. It is easy to move it to the desired location this moment place: in an open area, under a canopy or in a house.

If you wish, you can purchase or make your own folding garden furniture, which can be easily installed in any part of the garden or in the house.

Such furniture will last longer, as it will not be constantly exposed to precipitation. The weight of such products is small, they can be easily and quickly transferred to permanent place storage in a house or barn, where they do not take up much space.

In order for the product to serve for a long time, everything wooden elements must be treated with an antiseptic and coated with varnish, wax or paint. To give the wood the desired shade, use stain or special impregnation with pigment.

Garden table made from scrap material

We have previously talked about furniture made by. Stylish table, made from pallets, is cheap and looks organically on personal plot. The design, supplemented with furniture wheels, is also mobile.

Ordinary stumps decorated with mosaics look very original and can serve as a small table or stools in a recreation area. For mosaic decor, various tiles left over from renovations, chopped into small fragments and laid on tile adhesive or cement mortar, are suitable.

The originality of this composition lies in the creative approach of the owners. The most ordinary stumps are turned into a work of art.

An old table that has fallen into disrepair can also be decorated with mosaics and thereby update the tabletop. Needs to be removed from legs old paint, sand them and paint them again. Such a garden table will serve the owners for a long time and will gather the family around it for lunch and tea.

A wooden reel for winding cable can also serve as a table, just process it and decorate it a little or simply paint it in the desired color. The table will be easy to move if wheels are attached to the bottom.

Many people have inherited things, as they say: it’s a shame to throw them away and there’s nowhere to put them. Try to be smart and use them when arranging summer cottage. You can use the base of an old table as legs for a table. sewing machine, metal headboards and much more. By the way, you can simply buy a tabletop and install it on top of a metal structure.

Those who have weaving skills can make garden furniture from wicker with their own hands. If you are not capable of such feats, but really love wickerwork, then go to the store. Manufacturers offer tables and chairs made of wicker, rattan or artificial fibers to suit every taste and budget.

Metal garden furniture

If you are “friends” with metal, you have welding machine, then you can make garden furniture from this material. Such furniture, as a rule, is openwork and original. In order for the product to serve for a long time, the metal must be protected from corrosion before use. One of the most simple ways protection of metal surfaces is a primer, which is applied to the product before final painting.

Forged garden furniture – perfect solution for respectable home owners. Only masters can make one blacksmith forging with appropriate equipment and the presence of a forge.

Forged products go well with many materials: wood, glass, marble. If you wish, you can purchase a forged table blank and fill it yourself.

Stone table

IN Lately Small architectural forms made of stone are gaining popularity. Also on sale you can find tables and benches made of marble or granite. Such products have a high cost.

But it is not only decision. You can make your own stone base for tables and benches, for example, from rubble, flagstone, brick or blocks, fitting them into the overall appearance of the garden, combining them with other stone buildings.

As you can see, there are quite a lot of options for arranging a recreation area on a personal plot: from cheap, practically costless, to expensive. A table made with love will definitely gather wonderful people around it, and shared gatherings will bring pleasant moments.

If you have a small garden on your property, then there must be a comfortable place to relax, and the epicenter of this place should be a table. A large table for a friendly group of friends or a modest table for private gatherings over a cup of coffee – it doesn’t matter. If you are interested in this topic, you must have already visited more than one garden furniture website and visited all the surrounding furniture stores, but did not find anything suitable. Often good quality tables with stylish design They are prohibitively expensive, but you don’t want to buy anything. That's why we offer the most best option for hardworking owners - make a garden table with your own hands.

You may be surprised, but furniture can be made from a variety of scrap materials that, it would seem, have long been awaiting their final trip to the landfill. We suggest starting the article with a list of creative ideas for creating a garden table with your own hands from boards, pipes and other “unnecessary” materials, of which there are plenty at any dacha.

For example, an excellent and comfortable table can be made from a brick pallet. You can buy it or look for it at the nearest construction site. The furniture turns out to be very stylish and is suitable not only for the garden, but also for home interior in eco, loft and country styles.

Helpful advice: Since we will be talking about making a garden table from wood with your own hands, you should understand that if you do not protect such material from moisture, it will not last long outdoors. Therefore, before assembling any structure made of wood, carefully treat each element with antiseptic stain, and then cover it with 2-3 layers of weather-resistant varnish (tinted or not) or paint. In this case, stain can act not only as an antiseptic, but also as a toner, coloring the wood in darker colors (you can create an imitation of rare and expensive wood).

By the way, pallets can be used in a variety of ways, assembling literally anything from them, like from a construction set:

And if at a construction site you come across an unnecessary wooden spool, then to get a stylish round table for the garden, it will be enough to simply coat it with varnish and place it on the end:

And the last example, as from construction pallets you can create comfortable garden tables and benches with your own hands without much effort:

Making furniture from pallets has recently become quite a popular activity, so it’s not always possible to get suitable materials for free or cheap, but every owner wants to save money... next option garden table there is no such problem, because old used tires can be easily found at the nearest tire shop! The table is not high, but stable and very comfortable. To increase aesthetics, the tire can be carefully wrapped with twine and varnished, and the plywood tabletop can be decorated with mosaics or artistic painting.

The option in the image below will appeal to fans of eco-style. To make such a table, you only need a thick clay mortar and a wooden tabletop. The base can be given any shape, including storage compartments. If there are no clay deposits nearby, you can make such a table from thick concrete mortar, and then paint it any color.

An excellent place to relax with a table and comfortable seats can be obtained from the most ordinary metal barrels. There will be space under the seats for useful things, and soft pillows can be taken indoors at night or in bad weather to prevent it from getting wet.

Very unusual and beautiful garden tables are made from large old stumps. If there is a stump on your property that you still can’t get around to uprooting, maybe you shouldn’t do it? Check to see if there are colonies of insects inside (if there is already an anthill there, then the stump is most likely rotten and fragile), thoroughly saturate the wood with an antiseptic, coat it with varnish and attach a tabletop on top. It is best to use wood to make a tabletop, but you can also use thick glass or metal. Also, an old tabletop from a broken table or interior door. If the stump is large enough, you can do without a tabletop altogether, simply by carefully leveling its surface and covering it with stain and varnish.

Wooden garden table

Wood is the most popular material for making furniture. It is environmentally friendly, quite strong and durable, and easy to work with. Due to the light weight wooden table It is convenient to carry the IC to different places and, if necessary, quickly put it under a canopy. And to make transportation even more convenient, the design can be folding. In this part of the article you will learn how to make a folding garden table with your own hands.

Manufacturing instructions:

1. The folding table will be 55 cm in height, 85 cm in length and 50 cm in width. To make a strong frame that will hold the table top and legs, you will need 2x6 cm wooden planks. The frame is 62 cm in length and 35 cm in width. All its corners must be brought together at the end and drilled with self-tapping screws, since the frame will be tightly attached to the tabletop.
   
   
2. To make the legs, you will need similar 2x6 cm strips, 50 cm long. For greater aesthetics and safety, they should be rounded at both ends. In order for the table to unfold clearly and comfortably, the legs must be attached in a certain sequence. Tackle the first pair of legs first. Step back 5 cm from the outer edge of the supporting frame, make a mark and draw a vertical line. Then measure 4cm up the line from the tabletop and make a second mark. At the intersection of the lines, make a hole with a diameter of 8 mm - here the legs will be connected to the frame with 8 mm bolts. Alternatively, an aluminum tube of the appropriate diameter can be used, as in this case. Insert the tube into the hole, cut off the protruding ends and flare it on both sides. Attach the second leg to the frame in the same way.
   
   
3. The next step is to secure the bottom of the legs together to provide stability. It can be done wooden slats or using a piece of chipboard. In this case, chipboard measuring 38x8.5 cm was used. Mark the center of the width of a piece of chipboard, stepping back from the edges by 7 cm, then measure 2 cm from the center in each direction, trim off the excess and round the corners. This is necessary in order to slightly “recess” the fixing spacer into the legs and the supporting frame - this way the second pair of legs can cover the first and not stick out when the table is folded. To recess the spacer, place it on the legs and frame, trace it along the contour and, in the marked places, make cuts with a depth equal to the thickness of the chipboard. Then use a chisel to select appropriate areas to create indentations.
   
   
4. To assemble the second pair of legs, you need to slightly adjust the frame, or rather add small pads to increase the distance between the legs. If the distance between the legs of the second pair is the same as that of the first pair, the table will not be able to fold. Make overlays from wood 2.5 cm thick and 8x6 cm in size.
   
   
5. Drill 2 holes closer to the edges of each pad and screw them to the supporting frame with self-tapping screws. Now you can install the second pair of legs and make a spacer for them. Please note that the spacer in this case will be longer (44 cm), since the distance between the legs has been increased.
   
   
6. Next, for each pair of legs it is necessary to install a limiter so that the table cannot open too much and is as stable as possible. To make a limiter, take a 3x2 cm wooden plank, the length of which is equal to the distance between the legs. Place the strip over the legs, moving 5 cm away from the frame so that the legs are slightly apart.
7. The folding table is almost ready, and all that remains is to attach the tabletop to the frame. This can be done using steel corners or simply screwing the tabletop with self-tapping screws, as in this case.
   
   
   
8. The easiest way to make a tabletop for a garden table with your own hands is from chipboard. Clean all corners with sandpaper and apply wood putty to the fasteners. Next, the table can be coated with paint or covered with wood-imitation paper. To properly glue the paper to the surface, coat it and the parts of the table to be pasted with PVA glue, attach the paper and immediately go over these places with a hot iron. All that remains is to trim off the excess around the edges.
   
   
   
9. To protect the paper from getting wet and dirty, coat it with a weather-resistant varnish. In this case, the first layer of varnish was tinted. When dry, sand the surfaces with fine sandpaper to create roughness and increase adhesion for a good hold on the second coat of varnish. It can be made with a transparent composition. Before application, wipe the parts to be treated with a damp cloth to remove dust.
10. Finally, when the second coat of varnish has dried, edge the tabletop with plastic furniture tape in a matching color.
    
    

Now the table can be taken out into the garden and used for its intended purpose. There are a lot of options for folding structures, and at the end of the article you will find drawings of a transformable garden table. Even a novice carpenter can make such furniture with his own hands if he has the simplest tools.

Metal garden tables

Working with metal is much more difficult than working with wood, since it requires special equipment, not to mention professionalism. Besides, hardware weigh several times more and are not as mobile as light ones wooden tables. However, the service life of such furniture is much longer, and its resistance to external negative influences is stronger. If you protect the metal from corrosion, it will last under open air long years.

In most cases, profile pipes are used to make furniture. It is versatile and very convenient construction material, which has the correct geometric shape, making it easy to work with. To make a garden table from a profile pipe with your own hands, you need to have a special pipe bender and welding equipment. Below are examples of such products and drawings that you can use to make your own table.

Helpful advice: In the case of wooden tables, all elements should be treated with stain or other antiseptics. Metal also needs protection, so each part must be coated with an anti-corrosion compound or special paint. If metal furniture is constantly standing outdoors, the anti-corrosion coating should be renewed once a year (in spring).

Usually, metal parts serve only to create a strong and durable frame, while the tabletop and various decorative inserts can be made of wood, plastic, stone or glass. Various combinations allow you to create comfortable places to relax. The most basic structure made of wood and metal can look impressive if it is decorated accordingly and fits correctly into the landscape. For this you can use mosaic, multi-colored glass or decorative glass pebbles.

A table top lined with ordinary sea pebbles also looks very nice. And if you use the same pebbles to decorate elements of garden paths or porches, you can connect the exterior with the landscape into a harmonious composition.

The main advantage of garden furniture on metal frame is weather resistance - you do not need to worry that in case of bad weather the table will be damaged and will have to be restored. You can cover it for the winter plastic film, and every spring just update paintwork to prevent rust. Any hardworking owner can make a garden table from metal, wood or scrap materials with his own hands, and if you apply a little imagination to it, you can get a real work of art.

DIY garden table: photo

We will send the material to you by e-mail

Not everyone likes to buy ready-made products for home use. The soul of some people requires creative and practical self-realization. The editors of the online magazine website invites those interested to learn how to make a wooden table with their own hands, what is required for this, and whether there are any pitfalls in such work.

Beautiful wooden product for the kitchen or living room, made with love

Professional carpenters are unlikely to find our step-by-step recommendations useful, but beginner amateurs will find the advice very useful. First, let's look at what products you can make with your own hands from wood.

Of course, the more skills a person has, the more complex model he can do it. But to build a table with your own hands from wood, there are ready-made drawings and photos to help beginners.

How to choose a material for making your own wooden table for home and garden

What to make your own dining table from? Best of all - made of wood. The most pliable wood for a new master will be pine. Products made from poplar will look more solemn. For the street you can take mahogany.

If you want a simpler option for your home, then you should consider laminated chipboard with an optimal thickness of 25-35 mm. You can use wooden boards on the tabletop, birch plywood with a thickness of 35 mm. The legs can be made of metal or wooden beams (about 50 mm thick).

In order not to make a mistake with the amount of material, make a preliminary drawing future design with exactly specified dimensions.

Advice! The suitable height of the product varies between 750-800 mm.

Related article:

DIY wooden furniture: for the garden, children's room, kitchen, bathhouse, garden, gazebo; how to restore pieces of furniture, useful tips and recommendations from experts - read in our publication.

What tools are needed to make a wooden table with your own hands?

It doesn’t matter what shape the future table will be: working with wood requires a certain set of tools. You can’t do without a jigsaw, and it will be much easier to work with electric model. To secure all structural elements, use either a drill with a multi-stage drill for holes, or confirmations. To polish the product to perfection, you need a special attachment for a drill.

For greater fastening strength, the tools include wood glue.

How to make a wooden table with your own hands - step-by-step instructions

We have selected four types of structures that can be made on your own, even with a minimum of carpentry skills. We invite you to learn about the stages of manufacturing a round and rectangular table, coffee table and models for garden gazebo.

Making a wooden round table

It is easiest to make a round table top and a connecting ring from or with dimensions of 1500 × 1500 mm and 1280 × 1280 mm. You will also need two laminated chipboard strips (1110 × 120 × 25 mm). We will make the legs from four wooden blocks measuring 120 × 50 × 750 mm.

How to make a countertop

How to draw a circle perfectly straight? Place your own on a sheet of plywood in the center thumb hands with a string attached to it with a pencil. The length of the rope from the base to the top should coincide with the radius of the future tabletop. Holding your finger in one place, draw a circle around the full length of the rope with a pencil. All that remains is to cut it out with a jigsaw.

The underframe circle is cut out in the same way.

Making legs

A round table made of wood or chipboard will look charming if you do everything consistently. You won’t have to bother with the legs if your plans aren’t too original. The bars are divided into 4 parts according to the desired size of the table height minus the thickness of the table top. First, one leg is cut off, and the other three are aligned along it.

All processing grinder is carried out immediately.

Advice! You shouldn’t rush into sanding, as the first coat of varnish will reveal all the imperfections.

Assembly of the structure and processing of the finished product

Assembly is carried out in stages. First, align the planks groove to groove. Then the crosspiece of the planks is connected to the legs with confirmations, as in the figure below:

If you want to make the structure stronger, before connecting the legs to the tabletop, coat their upper base with glue.

Advice! Nails are not used in such work: a self-tapping screw or confirmat can be unscrewed without problems, and the connections will be much stronger.

Making a rectangular wooden kitchen table

The rectangular design is classic and very useful in everyday life: it is convenient to cook on such a table and you can comfortably dine at it.

How to make a countertop

A wooden tabletop for a table is made either from a whole sheet of plywood, or from individual edged boards processed to perfect smoothness.

Having fastened the boards with screws and glue, they begin to make the frame.

Making wooden legs for a table and frame

At the heart of the quadrangular models is a frame. It serves to securely fix the legs, ensuring the stability of the entire structure. The tabletop is turned over, a depth of 3-4 cm is measured on each side and the measurements are transferred to the boards. As a result, you will need two boards of shorter length and two longer.

The frame is made of four elements: according to the approximate ratio, these are two boards of X cm and two of 2X cm. They are connected to each other with an overlap one by one, building a rectangle. In order not to break the 90° angle, use any board when working with a screwdriver: it is used to press the structure while tightening the screws.

As soon as the frame box is ready, they begin to make the legs. You can take ready-made balusters for the table, buy metal supports, or cut them out of bars according to the desired length according to the drawing.

Both the frame and the legs are subject to mandatory thorough sanding!

Product installation and final finishing

The frame is screwed to the tabletop with glue or self-tapping screws. Then the product is turned over and the legs begin to be attached.

Important! It's better to make holes for the screws in advance. This eliminates the possibility of the wood splitting.

Why don't they use nails and a hammer? Not everyone has the skills to work with a hammer - it’s not only dangerous to hit your finger. Overdoing it can easily damage the wood by splitting it. Confirmations and self-tapping screws hold the tree much more firmly.

As soon as the leg is secured, the angle is immediately checked: there should be no deviation from 90°. The operation is repeated with other legs. You can attach the legs directly through the tabletop, but this will affect the aesthetic component of the product.

Related article:

: photos of the best ideas. What can be made from pallets for an apartment, office and cottage; rules for selecting and processing pallets; Master classes on making a table, sofa, bench, armchair and shelving - read our publication.

Making your own wooden coffee table

Not only a beautiful interior element, but also a useful one. There is no need to look for a visible place to put a book, gadget, glasses, or TV remote control. Such necessary designs made from different materials: metal, glass, plastic, chipboard, wood. But let's leave other materials alone and concentrate on working with wood.

Choice wooden table top for the table depends on the expectations of the owner of the product. Some people want something massive, while others prefer lighter options. Let's stick to a simple solution.

We purchase five boards 30 × 150 mm and process them to perfect smoothness. We cut it straight onto the tabletop desired length: You should get 6 identical canvases. We take four bars for the legs, 6 shorter pieces for the lower tabletop, and 4 narrow slats for the frame.

Illustration	Description of action
	To brush wood, use a grinder with a brass brush attachment. The procedure will expose the structure of the wood, giving the product a special flavor.
	We go back and forth along each board on the side that will be the front.
	We treat the wood with fire. The flame is gradually moved from place to place: the board will acquire a beautiful darkish tint. The procedure will completely destroy unnecessary soft fibers wood We actively wipe the entire surface with a felt boot or a piece of felt.

Let's start the assembly process small table with your own hands made of wood.

1. The lower and upper tabletops are placed on the work surface with the wrong side facing you. The boards are laid tightly together, gluing them together. Once the boards have set, slats are attached to the top tabletop. They will serve as a frame and fastening element. They can be glued or screwed with self-tapping screws. The self-tapping screw is screwed into the center of the slats into each of the boards.
2. The legs are screwed to both the tabletop and the slats. You can use furniture corners.

Video: the process of making a coffee table from wood

Making your own wooden table with benches for a gazebo

It's time to take the time and build a wooden garden table.

It's best to take boards standard sizes. IN hardware store Studs (suitable with a length of 16 cm), washers (24 pieces) are purchased. For a garden gazebo, long nails (8 cm) will do.

Whether to paint a product or simply varnish it is a matter of taste.

At the dacha there are very important items, but which you can do yourself, so as not to overpay, so our topic today is DIY garden table. You are free to make it any size you want to get a small table set, and a large one so that the whole family and guests can fit behind it, as well as folding models, functional, original, which are used as decoration, and so on. Below we will give you examples of each of the above groups, and also see how difficult or easy it is to make this important item.

Do-it-yourself wooden table for a summer house

Wood is relatively accessible and inexpensive, depending on what type of material you want to use to create DIY wooden table for the garden. In the vast majority of examples we're talking about O wooden boards of one thickness or another, which make up the tabletop, and for the legs and supporting elements of the structure it is used wooden beam, perfect suitable material for this task.

We can talk about the advantages of boards for a very long time, but, first of all, this is the availability of the material, its low cost, and, what is very important for home craftsmen and those for whom even simple tasks are an important task - working with wood does not require many complex, expensive tools and no knowledge of operating techniques is required. In principle, assembling a stool is a compulsory program for boys since school days, and we assure you that assembling DIY garden table made of wood not much more difficult.

But before you choose among the models DIY garden table, drawings and schemes, you will need to decide which one you need and for what purposes. The degree of success of the design may greatly depend on this, since the table itself will be good, but will not be suitable for the task at hand. So, if you need a portable model, then you should not make it using logs or similar heavy material, since moving such a colossus will not be easy. Round varieties look very interesting, but they are better used for filling the same round shapes. After all, although the circle allows you to seat guests, there will still be significantly less space on the surface of such a tabletop than on a round one. It is also important what the legs will stand on; if it is a completely flat concreted area, then you can choose models with four level legs. They look very elegant and are quite simple to make. But if you want to arrange a feast on the lawn or you are not confident in the absolute flatness of the floor surface, then it is better to choose more stable leg options, for example, oblique ones, which will allow you to maintain the stability of the structure in this situation.

DIY outdoor garden table

Is wood the ideal material? DIY outdoor garden table? Many doubt this, because in this case it wooden surface Water will constantly drip, both from rain and, for example, from watering, and this can negatively affect the wood. But, since all the positive aspects of this particular design are very numerous, it is worth thinking about special compounds that are used to paint wood. They do not change its structure, on the contrary, they can emphasize it, make it even brighter, even “more expensive”, but at the same time, they prevent the absorption of water into the surface and the appearance of all the negative phenomena that are associated with it. Therefore, just after finishing production, don’t be lazy and don’t save money - coat the finished product with a high-quality paint and varnish composition.

There may be several areas on the street where it would be appropriate DIY wooden table for a summer house, drawings which you could see above. First of all, this is a summer terrace or a place for eating, located near summer kitchen. There you will need a large, wide tabletop, which, ideally, is equipped with benches or chairs of exactly the same design, so that it all looks like one set. But we may need a table not only for eating, but also for doing gardening work. For example, in a garden it is best to install it in some picturesque clearing, fit it into landscape design. It is also needed on the finished one, because with it you can draw, sculpt, and play board games.

We would like to talk a little about special tables that are gaining more and more popularity among owners summer cottages. The fact is that in addition to the traditional set, new variety- bar counter. This is a tabletop of an unusual shape - it is located on very high legs, so that the person who sits at it and who stands behind it are the same height. Such entertainment as a country bar, decorated, for example, in a beach style, greatly decorates the site. In the photo you can see what this might look like DIY wooden outdoor garden table.

There are no particular difficulties in the bar counter format; you will only need to understand what its size, height and width will be most comfortable for you. To others mandatory element designs will be available large quantity shelves and drawers where you can put dishes and all other accessories for creating cocktails. The material for the construction can be either boards or pallets - boxes, which are in great demand today, although you will have to work with it no less than when knocking down table with boards for the garden with your own hands. The fact is that in these boxes there is not only an expiration date, but also an initially good or poor quality wood, therefore, in pursuit of ease of assembly, you can end up with a product of poor quality, crooked and with an uneven tabletop. And all because after one season of use the board begins to “lead” in different sides, so it’s worth not only buying high-quality pallets initially, but also letting them sit for some time before work.

Continuing the theme of the bar counter, we want to show you a few more tall varieties. These are also auxiliary tables-trolleys, mobile and convenient for moving within the entire site. They come with small wheels that make them easy to carry, but also think about the material you use to make them as light as possible. In addition, developing the idea of ​​a bar counter, you can do something much larger by making a circular tabletop, for example, on a fence framing a barbecue area. And the idea of ​​​​designing a round rack that goes around the tree is not only practical, but also very beautiful. Previously, we could only see benches that were placed in a similar way, but it turned out that they would cope with this task just as well.

How to make a garden table with your own hands

To develop the theme of useful furniture, we will briefly show you the process of creating an auxiliary table. In this case, when solving the problem, how to make a garden table with your own hands, two main stages are used - creating a frame and designing a tabletop.

To create a frame, an appropriate drawing is selected, the length of all the boards and timber that are part of it is marked, and then they are sequentially knocked together. You see a ready-made, assembled frame, decorated with a pergola element on high back. This will not only decorate the craft, but such a perforated plane can be used to store kitchen utensils. On top of the recess, you need to lay a tabletop made of a flat material, for example, a laminated wide board, so that there are no gaps in the surface between the boards, since dirt will easily get clogged there. A technical hole is cut for a metal sink purchased at a plumbing store, as well as all the holes for communications, taps, and pipes that you will need. When installing a sink, carefully seal the edges of the hole; this will secure the element in the countertop and prevent water from penetrating inside. All that remains is to connect the structure to the country water supply system, and drain the drain into a septic tank or cesspool.

If you want to DIY a traditionally shaped table, this will give you some advantages as you will be able to outfit the tabletop with very useful features. For example, make a small hole inside, in the center, where you can, if necessary, insert a large umbrella, protecting everyone who sits around it from the scorching rays of the sun.

And in cases where there are special requirements for functionality, you can go even further towards creativity. For example, make a recess in the middle of the table, inside of which there is a cooler bag. Ice is poured inside it and bottles of beer are placed - for a long summer feast. For those who don’t like beer creativity, they can place moss or unpretentious garden plants in such a niche, which will simply decorate the appearance with their presence.

DIY garden table photo

When we use pallets, as we have already talked about, it is best to use a combination of them with other materials, or a non-standard shape for the finished product. You can see how beautiful this can look to improve your country life by looking at the example of creating DIY garden table, photo which is located below.

And also examples of more traditional tables with a “zest” - a folding element that makes such furniture extremely convenient to use. If you don't need them, you can easily reduce them by half overall size or, in general, put them away until the need arises.

DIY table and bench for your garden

The ideal option, if you feel a sufficient degree of skill, is a whole set consisting of DIY tables and benches for your garden.

The examples above show that these kits can be different forms and sizes, but at the same time they look very stylish and expensive, precisely because they are made in the same style and their designs echo each other.