To decorate the interior of a living room of rare beauty and uniqueness, you need to use high-quality and expensive finishing materials. For example, Venetian plaster will look gorgeous in the interior of the living room. Wallpaper and paint are not suitable for recreating a special atmosphere. In this case, designers suggest using Venetian plaster. In another way she is called “Venetian”. Let's consider why she is valued and what is the secret of her unique beauty and popularity.

Venetian plaster in the interior of the living room with imitation marble

Types of decorative plaster for interior wall decoration

As you know, plaster consists of natural materials and synthetic fibers with various fillers, on which the pattern depends. Today there are four main types of plaster:

Mineral. The basis is cement (lime). Can be used anywhere. This is the most cheap look decorative plaster, which constantly experiences vibrations and may crack.
Silicate. This type is also sensitive to vibrations, but the surface does not attract dust and dirt. It has good performance in terms of steam and water resistance. After its application, mold does not appear.
Acrylic on resins. This type of plaster is not afraid of temperature changes. The surface dries quickly and washes well.
Silicone. They are based on binder polymers. The plaster is plastic with low water absorption and excellent vapor resistance. Of all the above types, this plaster is the most expensive.

Pedigree of Venetian plaster for living room interior design

Classic Venetian plaster began to be actively used during the Renaissance. Ancient Rome is considered the birthplace of such an interesting and unique wall covering.

Venetian plaster in the interior of a modern living room

In those distant times, Venetian plaster decorated the walls of rich houses of nobles. The preparation process itself and the composition of the decorative mixture were kept strictly secret. The coating turned out very beautiful. It could imitate:

marble;
granite;
onyx;
jasper;
malachite.

Bas-relief made of decorative plaster in the design of the living room

The surface of the walls could be glossy or matte at the discretion of the owners. The finished surface was durable. Since then, some samples of walls have been preserved that prove this.

Venetian plaster imitating light marble

Advantages of Venetian plaster in living room design

Plaster has its undoubted advantages over other finishing materials:

easy application to the surface;
Before application, the wall must be primed, additional Finishing work no longer needed;
easily masks imperfections on the wall;
prevents mold;
resistant to moisture and temperature changes;
capable of imitating stone, wood, silk, marble, granite;
you can make patterns and drawings;
Venetian is an environmentally friendly material.

Composition of Venetian plaster for finishing the living room

The main components of Venetian plaster are the following products:

slaked lime, it can be replaced with an acrylic base;
stone dust;
colored pigments.

Graphite-colored plaster in a modern living room

These same components were part of the medieval Venetian woman. In addition to the plaster itself, a layer must be applied that consists entirely of natural beeswax.

Part of the wall in the living room interior is decorated with Venetian

Advice! To make the wall smoother after plastering, all particles in the composition must be small.

Venetian plaster gray shade in the design of the living-dining room

Decorating the living room with Venetian plaster: application technique

Usually only specialists with extensive experience work with Venetian. But knowing the features of plaster and the basics of application techniques, you can decorate the wall with your own hands.

Venetian plaster close-up orange-red hue

Stages of applying Venetian plaster:

Preparatory work. The walls are leveled, puttyed and sanded. This will help get rid of any unevenness that could affect your appearance. finished wall. For convenience, you can mark the location of the Venetian. At the end, the surface must be primed.
Basic finishing. They proceed to this stage only after the preparatory stage has been successfully completed. The application technology is divided into several stages. The first is the main one: applied using a wide trowel with a flat surface or rounded corners. The plaster is applied in a thin layer in all directions. After each application, the spatula must be cleaned with a damp cloth. After completely dry the surface must be cleaned.
Next, the second layer is applied. The plaster is applied in separate strokes and with a flexible spatula. Then several more layers are applied with strokes. At the same time, the wall in front of each of them is well leveled. The Venetian is applied until the spotting disappears and the transitions are visually smoothed out. To create a spectacular look, each layer of plaster can differ in tone from each other. The diluted mixture dries quickly, so it is recommended to treat a small area of the wall. After all layers have dried, the surface is treated with fine-grained sandpaper.
To protect the wall you can use beeswax or special varnish. This product is applied 6-8 hours after the plaster has dried. These products have water-repellent properties, which will extend the service life of the decorative coating.

As you can see, using Venetian plaster yourself is not that difficult. First, be sure to practice on a small section of the wall. Otherwise, you may ruin expensive material. If you are afraid to take on such plaster, then it is advisable to turn to professionals.

A niche in the wall is decorated with shiny Venetian plaster in a classic living room

A variety of Venetian plaster for living room renovation

The most common and popular type of Venetian is considered to be marble imitation. This is the most classic look. You can find other variations of Venetian plaster on sale:

silver;
gold;
nacre;
jasper;
malachite;
granite.

Light blue Venetian in the living room interior

There are several types of Venetian plaster:

Veneto;
Trevignano;
Marbello;
Ensausto.

Let's look at each type in more detail.

Venetian plaster with a wet silk effect

Venetian plaster "Veneto" in the living room

This is a common type of Venetian with the effect of polished matte marble. It has several main advantages:

affordable price;
easy and simple to apply;
not demanding in operation and maintenance.

Venetian plaster in the minimalist living room interior

Venetian Trevignano plaster in the living room

This decorative coating looks original and amazing on the wall. It seems as if it is illuminated from within. In the interior of the living room it will look like a mirrored marble wall. The appearance of this Venetian resembles the travertine rock.

Using plaster you can make wall frescoes and paintings

Trevignano plaster is distinguished by the presence of translucent layers and a large number color shades, which give an amazing visual effect. This plaster can be used in the following styles:

classic;
baroque;
vintage.

Be sure to complement such a wall with aristocratic frescoes.

Blue Venetian plaster in the living room interior

Venetian Marbello plaster in the living room

The appearance of this Venetian plaster resembles rough-hewn marble. Furnish your living room proper lighting and enjoy the play of light. Visually, the wall on which such plaster is applied looks velvety with glossy polished veins.

Venetian light purple color in the interior of a modern living room

Venetian plaster "Ensausto" for the living room

The appearance of the Venetian resembles granite. The surface becomes semi-matte. Small inclusions characteristic of granite are visible.

Light plaster in a minimalist living room design

Disadvantages of Venetian plaster for decorating the living room interior

Among the disadvantages are the following characteristics:

high price;
you need to prepare carefully for the application process;
Self-application is a painstaking task, so it is recommended to contact specialists, and their services are also not cheap.

Venetian light gray with imitation granite

Venetian plaster can be used to make panels and frescoes. This will give the living room a special atmosphere.

Venetian plaster pattern resembles sea dogs

In what style can Venetian plaster be used?

The Venetian will transform any space. With its help you can make a real royal residence. Plaster fits harmoniously into the following styles:

classic;
Empire;
baroque;
rococo;
Art Deco;
high tech.

Photos of living rooms with Venetian plaster

14573 0

Venetian plasters

Among all types of decorative plaster, Venetian plaster is rightfully considered the most spectacular and elegant, and therefore costs more. Despite the fact that the technology for applying Venetian plasters is well known, it is not so easy to cope with. This material requires a certain skill and a steady hand, otherwise all efforts will be in vain.

The plaster itself is a thick, translucent mixture that is sold ready-to-use. She is tinted in different colors, and when applied in two or three shades, it forms a coating with a marble effect. The more layers, the deeper the color, and the more luxurious the finish looks. The plaster is given special expressiveness by its gloss, which refracts light rays and makes the coating play with different shades. To enhance the gloss, the surface is coated with special wax and polished.

Plaster composition

The plaster mixture consists of fine filler, binder, organic and inorganic additives, and stone chips. The most commonly used fillers are gypsum, lime, marble, quartz and granite flour, and latex and acrylic emulsions and slaked lime are used as binders. The final finishing result depends not only on the composition, but also on the size of the particles: the finer the grind, the more delicate the pattern.

Properties and characteristics

There are two main types of Venetian plaster - embossed and smooth. The first type contains small granules up to 2 mm in size, due to which the coating acquires a certain texture. The second type forms a perfectly smooth transparent surface, allowing you to achieve an indescribable play of light. In turn, smooth plaster is divided into glossy, semi-matte and matte, and each variety is attractive in its own way.

Venetian plaster has the following characteristics:

high strength - during the drying process, a very hard carbon film is formed on the coating, providing protection from scratches, abrasions and other mechanical damage;
plaster can withstand temperature changes ranging from -50°C to +80°C;
The coating is waterproof, so it can withstand wet cleaning and even washing with soap solutions;
This plaster contains no substances hazardous to health, so it can be used in bedrooms and children’s rooms;
Correctly applied coating lasts 15-20 years without loss of external qualities.

Despite its strength and moisture resistance, “Venetian” is not intended for external surfaces. Prolonged freezing, exposure to precipitation and wind will lead to the appearance of cracks and rapid destruction of the finishing layer. And the price of such finishing is very high, considering how much material is required for the facade. True, some manufacturers have already begun producing special formulations that are suitable for both internal and external use.

To achieve a marble effect, the mixture must be applied in layers - from 3 to 10 layers. There are strict requirements for the base: it must be perfectly smooth, even, dry and clean. Despite the multi-layer structure, the coating is very thin, so the smallest irregularities will be clearly visible. And the transparency and gloss of these defects will be emphasized even more. As for the base material, it can be brick, wood or concrete.

Popular types of plaster

The high demand for Venetian plaster contributes to the constant expansion of the range. Every manufacturer tries to attract customers with something new and unusual. This is how compositions with gold pigments, coatings with a metallic sheen and bronze veins appeared, shining from the inside and with a velvety-looking surface. The products of such brands as “San Marco”, “Clavel”, “Candis”, “Croston”, “Alpina”, “Optimist Elite” are distinguished by their special variety and quality.

Classic plaster is divided into types depending on the composition, since it is this criterion that determines the external characteristics of the finishing layer. Let's look at the most popular varieties.

Name	Main characteristics
	Water-soluble composition with the effect of polished marble. Odorless, ready to use, filled with marble flour. Temperature Range operation of the coating from +5 to +35 °C. Drying takes 24 hours, consumption is 0.350-0.5 kg/m2 when applied in three layers
	Depending on the application method, it can create the effect of cork and polished marble with terracotta inclusions. Contains limestone filler and aged slaked lime. Drying time – 24 hours, consumption 0.7-0.8 ml/m2 for two-layer application
	Composition with the effect of natural stone with colored inclusions. Contains stone flour, lime paste, terracotta granules, inorganic dyes. Does not require dilution with water, has antiseptic properties. Complete drying time is a day, before operational loads – 20 days. Consumption 0.6-0.8/m2
	Waterproof composition with shiny veins, creating the effect of a velvety coating with chopped edges. Complete drying time – 24 hours, consumption per layer – 0.350 g/m2
	Synthetic composition with a mirror effect. Forms a very decorative coating that is not prone to cracking. Does not require dilution, drying time is 24-36 hours. Material consumption – from 170 to 200 g/m2 per layer
	Lime composition containing gold pigment. Forms a coating with a metallic sheen and fine gold veins. Cannot be diluted. Drying time – 24 hours, mixture consumption – 200 g/m2 per layer
	Acrylic composition imitating roughly processed marble with gilding and mother-of-pearl shimmer. The coating has an incredibly luxurious look. Complete drying time - from 12 to 24 hours, material consumption 0.6 kg/m2 for the base layer and 0.2 kg/m2 for the finishing layer

Prices for popular types of plaster

Plaster

Technology of wall finishing with Venetian plaster

Tools and materials

Decorating the walls is preceded by careful preparation, and first you need to stock up on the necessary tools:

trowel with rounded edges;
metal spatulas;
construction mixer;
foam roller;
sandpaper;
paint brush.

Depending on the condition of the walls, you may need plaster mixture, putty, cement mortar, primer. You can use one primer composition for all stages of work, and deep penetration acrylic primer is best suited. Professional craftsmen It is recommended to use a special primer, for example, SuPrim100, as a base for the finishing layer. This composition covers the color of the base, so that the walls do not show through the layers of plaster, and the coating acquires a deeper color.

It is very important to correctly calculate the volume of the mixture for Venetian plaster. Since a mixture of different shades is usually used, the amount of each of them is calculated separately. That is, first find the total surface area and multiply the plaster consumption per square meter by it. Now you need to determine how many layers of the same color are needed and multiply the resulting volume by this amount. The volume for other compositions of a different color is calculated in the same way.

For example, for finishing it is planned to use white and black plaster. We will apply black in 2 layers, white in one intermediate layer. The total area of the walls is 10 m2, and the average plaster consumption is 0.350 g/m2. Multiply the area by the consumption:

10 x 0.350 = 3.5 kg will be needed to apply one layer. That is, you need to buy 3.5 kg of white plaster, and 2 times more black plaster - 7 kg. Additionally, you need to add 5-10% in reserve.

As for tinting: as a rule, plaster mixtures are supplied in three options - colored, base bright hues and base under dark colors. Basic mixtures are much preferable, since they can be given absolutely any color and shade, while the color palette ready-made compositions very limited. When choosing a base, you can order tinting from specialists or do it yourself at home. It’s not difficult at all, the main thing is to follow three rules:

plaster and tinting paste must be from the same manufacturer;
the plaster and pigment must be mixed immediately before application;
so that individual sections of the same plane do not differ in tone, the proportions of the components must be the same for each batch.

Prices for deep penetration primer

Deep penetration primer

Surface preparation

The configuration of the base for the Venetian does not matter much; such plaster is successfully used for finishing arches, columns, semicircular niches and arched walls. But the quality of the surface means a lot, because the appearance of the finished coating largely depends on it. The base must be strong, without defects, voids, as smooth and even as possible.

So, first they remove all unnecessary things from the walls and carefully inspect the surface. Particular care should be taken to check the plaster, which may visually seem durable, but in fact has already begun to peel off. Lightly tap the walls with a hammer - if the sound is dull, you need to clean off the old coating and plaster again.

Be sure to seal through holes and cracks, and cover deep recesses with solution. For better leveling, use dry building mixtures, which, unlike cement-sand mortar, lie smoother and do not crack.

After the base layer has dried, the surface is rubbed with sandpaper, dusted off and a finishing layer is applied - a covering, which allows you to eliminate the smallest irregularities. The solution is smoothed with a polyurethane or metal trowel to an ideal state and left to dry.

Plasterboard walls also require preliminary preparation.

The seams between the sheets are filled with putty, a reinforcing tape is placed on top and, using a spatula, it is carefully rubbed into the solution. The surface must be primed to increase the adhesion of the solution to the drywall, and then a rough layer is applied starting putty. The layer should be uniform, thin, and, if possible, without sagging or scratches. After drying, sanding, dust removal and priming are performed. If the unevenness on the walls is no longer visible, you can apply finishing putty, otherwise another intermediate layer will be needed.

Video - Sealing gypsum board joints

Proceed to decorative finishing This is possible only after the leveling solutions have completely dried. Then the walls are once again wiped from dust and treated with any waterproof deep penetration primer.

If you have never had to deal with decorative plasters, first practice on a piece of plywood or plasterboard measuring about 70x70 cm. The material must be fixed on a flat surface so that it does not move during work. Or you can try your hand at a section of the wall that you plan to cover with wood or plastic: this way you will quickly decide on the application technique, and the trial results will be hidden by the covering.

Step 1. To create a background, pigmented primer is applied to the walls with a roller in 2 layers. The composition must be rolled out well over the surface in one direction. The second layer is applied 8-12 hours after the first. Complete drying of the soil requires 24 hours.

Apply primer with a roller

Step 2. Dry walls should be sanded with fine-grained sandpaper, then the dust should be thoroughly wiped off. The base should be a uniform white color, smooth and silky to the touch.

Step 3. Add color to the plaster mixture and mix well with a mixer until smooth. Color can be added gradually to select the optimal shade of plaster. Just keep in mind that after drying the color will become a little lighter.

Mix color and base

Step 4. Place a little mass on a trowel (about a tablespoon) and apply it to the base in strokes.

You need to start from top corner, the tool should be held at an angle of about 30 degrees to the surface. The strokes are made with slight pressure, in a chaotic manner, rubbing the layer as thinly as possible. Do not try to cover the base; it should be visible through the solution.

Always add the solution in small portions, treating area by area. You cannot return to places that have already been covered - this will ruin the structure of the coating. At joints and in recesses, use a narrow spatula instead of a trowel, being careful not to catch the layer with sharp edges.

Advice. To avoid leaving marks from the tool, the trowel should be moved from a dry surface to a wet one. This way the composition is leveled faster and more evenly. If you do the opposite, the solution will begin to drag behind the trowel, and noticeable marks will form. While working, wipe the instrument frequently with a damp, clean cloth, since dried crumbs of the solution and accidentally trapped grains of sand also leave unsightly marks that show through the coating.

Step 5. After completing the application of the first layer, wash the tool thoroughly and pause work for 6-12 hours. After this, you need to treat the walls with “zero” sandpaper to eliminate possible protrusions and sagging, and clean them from dust.

Step 6. For the second layer you will need plaster of a different shade. They apply it in the same way, but it is advisable that new strokes do not coincide with the previous ones where this is visible. Try to maintain the same pressure when rubbing, as if compacting the layers with uniform movements. Having completed the process, the walls are again left to dry for 8 hours.

Step 7 The third layer should be the same color as the first, or have a different shade, the main thing is that it differs in color from the second layer. The plaster is applied as described above and carefully leveled. Since this is our last layer, there is no need to wait until it is completely dry. Manufacturers recommend starting polishing approximately 2-3 hours after application, since wet plaster can come off the base, and completely dry plaster cannot be polished.

Step 8 So, let's start polishing the coating. By this time, the surface should become slightly porous and matte, like untreated stone. Take a clean and dry trowel, apply it flat to the base and, pressing on the front of the tool, rub the plaster layer in a circular motion. Here it is very important to correctly maintain the given rhythm and pressure, then the coating quickly acquires a glossy shine, becomes smooth, and the pattern appears. Make sure that the edges of the trowel do not damage the coating. After polishing, it is necessary to allow the plaster to dry completely and gain maximum strength. This usually takes about 7 days.

Step 9 The final stage is applying wax.

The walls must first be wiped with a dry cloth to remove dust. The wax has a thick consistency; it is most convenient to apply it with a flexible spatula or sponge. The composition is taken in small portions and distributed in strokes over the surface. Try to rub it as evenly as possible, as once a thick layer of wax dries, it will remain darker than a thin layer and the finish will appear patchy.

Step 10 After 2 hours, when the wax has dried sufficiently, it should be polished using suede cloth, using intense circular movements.

Depending on the brand of plaster, the finishing process may have some differences. First of all, this concerns drying times and the number of layers. Before starting work, carefully read the manufacturer’s instructions on the packaging of the composition - this will help you avoid mistakes in application and ensure a high-quality result if all conditions are met.

The described technology allows you to obtain the simplest classical pattern. If you use plaster of three colors, the shades of the coating will be richer and more expressive. To create a more sophisticated design, increase the number of layers and apply strokes in a certain order. A lot depends on the artistic flair, experience and skill of the person doing the finishing.

Today modern Construction Materials help you get a luxurious interior space. A variety of color palettes allows you to choose a shade suitable for any room. Each of them has characteristic differences and method of application. Detailed instructions for use greatly facilitate the task.

In our material, we will talk about decorative Venetian plaster. Here are the tips of experienced professionals who know all the intricacies of this finishing material.

Preparatory work

IN construction stores A detailed catalog of Venetian plaster is presented. This manual includes several types of textures that add a unique twist to the interior space.

Before purchasing this finishing material, you must carefully prepare the room. First of all, it is recommended to clean the wall surfaces from the old coating. These are mainly wallpaper, paint and plaster components.

All irregularities are carefully covered with a special putty composition. Some mixtures contain antifungal substances. They prevent the growth of pathogenic mold in rooms with high humidity and poor ventilation.

The dry solution is diluted in an even proportion of water until a thick consistency is obtained. Next, it is applied to the defective areas of the wall using a long spatula.

After each layer of putty mortar, the wall is left until completely dry. This will prevent new chips from appearing during the application of Venetian plaster.

When all the irregularities are eliminated, they proceed to applying a special impregnation. It promotes good fixation of materials to each other. The main advantage of this finishing material is its ability to mask small wall defects.

The only requirement preparatory work, is the absence of any foreign particles on the prepared wall surface. In the future, this can provoke the appearance of cracks and splinters, which significantly affects the appearance of the finish.

When all layers of the primer composition are completely dry, you can proceed to the process of applying Venetian plaster with your own hands.

Applying layers

Modern types of such compositions contain: natural marble, fine gypsum, various pigments. The colors of Venetian plaster can be mixed with each other and the most suitable one can be selected based on the basic tone of the interior space. Mother-of-pearl components in the mixtures add solemnity to the surrounding environment. They make the room look brighter and more spacious.

The workflow for applying Venetian marbled plaster involves several layers. First of all, make a leveling layer. Then, gradually, the surface of the wall begins to be decorated with decorative mortar.

There are types that require 6 times application. Each subsequent layer must dry well. If you neglect this requirement, then the risk of cracks appearing on the wall surface increases.

The drawing for this design is selected individually. Some consumers prefer to use a special brush to correct application. Experienced professionals recommend creating textured lines on the surface of the decorative mortar.

The article provides everything that concerns the concept of Venetian plaster in the interior. Photos of ideas in the apartment, video tutorials on how to apply them yourself, classification and selection tips. In addition, the following information is provided:

What is a Venetian?
Advantages and disadvantages, classification, possibilities of use in various rooms.
How much does it cost, how to choose in the store.

What is a Venetian

Venetian plaster imitates marble. It is popular among connoisseurs of interiors, where luxury is the dominant design. Imitation marble not only looks attractive, but is also beneficial in terms of budget - material is inexpensive option stone wall cladding.

Manufacturing technology has undergone significant changes. The basis of the traditional composition of the material is small particles of stone: dust, flour. Manufacturers periodically experiment with the rocks used, but mainly particles of granite, quartz, limestone, onyx, and malachite are necessarily used in its composition.

Advantages and disadvantages

Let's discuss the many advantages of Venetian plaster in the interior. Photos of apartments with similar decoration resulted in a huge number of positive reviews. Advantages:

All components are natural materials.
Brings unusual visual effects to life.
Plaster protects against surface damage and cracking, and temperature changes. The effect is achieved with the help of wax, which covers the surface of the installation.
Allows you to level the wall with plaster.

The main disadvantage is that applying Venetian plaster is not cheap.

Set a budget. Prices range from small to significant;
Choose the appearance of the plaster. It must be combined with color scheme and the style of the room, furniture;
Select application style. The coating is applied using several techniques (antique decoration, sgraffito, bark beetle) - in each case a unique design.

Pre-apply to another surface. This way you will appreciate the quality of the plaster and avoid inconsistencies in style and color.

What can be depicted on the wall

Venetian plaster is a suitable material for paintings and graffiti. They draw whatever their imagination allows. Considering the specifics of the material and the preference for the classical style of premises, the most common designs are intricate patterns made in pastel colors.

The plaster is also painted with other themes. Starting from the concept of “pattern,” oriental patterns such as hieroglyphs, ligature, etc. are depicted. Such decoration is appropriate if the overall decor of the apartment corresponds to an oriental theme.

Classification

Venetian plaster is divided according to the method of facing and forming a pattern on the surface:

Reflection. The material is applied with a relief roller, brushes or fingers.
Combination. Such linings contain a small amount of coarse granules. The mass is applied to the wall and leveled with a spatula. Due to the movement of the grains, a pattern appears on the wall in the form of grooves or scratches, depending on the shape of the grains.

Textured plaster is applied with a spatula or roller, without further processing. It is expensive, it is recommended to be used only by professionals, because there are some subtleties in handling.

The material is popular due to its variety of types.

View	Peculiarities	Cost, rub
Craquelure	● imitation of cracks and scratches; ● antique finish; ● unique design; ● durability.	from 1000
Carrara marble	● similarity to natural marble; ● applied in 12 layers; ● significantly more expensive than analogues.	from 2000
Marseille wax	● wax added to the composition; ● used in any room; ● is waterproof.	from 5000

Video tutorials on how to apply Venetian with your own hands

We invite you to watch a video tutorial on applying Venetian plaster from ordinary putty with your own hands.

Differences from other types of decorative plaster

View	Compound	Price category	Peculiarities
Venetian.	Marble flour, water emulsion, slaked lime.	Above average.	The effect of a marble surface or marble mosaic.
Structural.	Granular mass with an admixture of granules (wood fiber, pebbles, quartz grains, etc.)	Average.	Plasticity and ease of work.
Mineral textured.	Cement in the form of dry mixtures.	Average.	The best option in terms of price-quality ratio.
Silicone white Venetian plaster.	Based on silicone mixtures.	Above average.	Almost unlimited color range, excellent elasticity, high vapor permeability.

Venetian plaster - photo in the interior of the apartment

Venetian plaster is a wonderful tool that helps decorate a room, making it more comfortable and attractive. Plaster suffers minimally from moisture, so it is installed in the kitchen and bathroom.

In the kitchen - photo 6 interior ideas, pros and cons

Wall decoration in the kitchen requires a special acrylic mass. The plaster is environmentally friendly and can be given any desired shade. Moisture resistant, dries quickly. Of the main advantages that Venetian plaster has in the kitchen (6 photos in the interior below):

“Breathes” and does not allow water vapor to pass through;
Suitable for wet cleaning.

For large kitchen choose textured and relief coatings. A small room can accommodate fine-grained coatings well. Any colors - there are about 2 thousand shades in total. Choose depending on the design solution of the kitchen.

Focus on the size of the room - in small spaces, bright, saturated colors look overly aggressive.

Several options for use in the kitchen:

Vacation home

Modern style

Cottage

Studio apartment

Classic style

Khrushchevka

Decorating the hall is an important issue when renovating an apartment

The hall is traditionally a place for the whole family to relax. Decorating this room is a serious issue when renovating. When choosing plaster, be guided by the size of the room and zoning options.

The Venetian is suitable for a high-tech and minimalist apartment. It looks beautiful in a classic style, provided that the colors of the plaster are neutral and as muted as possible ( classic design does not like tackiness).

In the country

Mediterranean style

Cracks

Lamps

Backlight

A large room

To properly install Venetian plaster in the bathroom, it is important to ensure a perfectly level and smooth base for application. Remove the previous coating, level it and apply sanitizing plaster on top. This base has waterproofing properties and protects the coating from moisture and cracking.

If you do not want to remove the old tiles, try finishing the room with moisture-resistant plasterboard using a frame fastening method. The method is reliable, but significantly reduces the area of the bathroom, which is unacceptable for small rooms.

In orange color

White classic

With windows

Gray-blue

With shower

Next to the washbasin

Is this type of decoration suitable for a hallway?

The hallway is a formative component in the perception of a home. Plaster looks good when the whole apartment matches a certain style. To lay plaster in the hallway, no additional measures are required.

Hallway of the house

Combination with parect

Long room

Small room

Red color

Beautiful interior

Venetian plaster – price per m2 of work or how much is the cost of application services?

Presented here approximate price for the work of m2 for Venetian plaster of different types.

Photo	Service	Cost, rub./sq. m
	TREVIGNANO	from 555
	VENETO	from 440
	Marbella	from 300
	ENCAUSTO	from 960
	TIERRAFINO	from 490

Marble plaster - video instructions

If you have not yet decided which one to use indoors, then pay attention to Venetian plaster. This material first appeared during the Roman Empire. Using the right technology You can achieve something magnificent, impressive with beauty and luxury.

So, let's figure out what Venetian plaster is. Photo different designs with unusual finishing in large quantities will be presented below. must be carried out taking into account certain rules, characteristics of the surface being treated and even climatic conditions. Therefore, this material requires a responsible and careful approach.

Read in the article

What is Venetian plaster in the interior: photos of interesting interiors

To make plaster, malachite, limestone, quartz, onyx and grant are used as fillers. Depending on the constituent components, the mixture can be natural or synthetic.

There are some features in the use of Venetian plaster:

stone dust in the material may have different degrees of grinding. The coarser the grind, the coarser the pattern will be;
Venetian plaster in the interior has a natural shine. In this case, a material with mineral fillers can have a glowing effect from the inside;
high-quality plaster can both give it away and give it away, so the material is characterized by excellent strength;
depending on the type of finish, the surface can be smooth, artistic or.

When creating smooth plaster, marble and dust are used, which are bound with lime. Using embossed material you can achieve original design. It is easier to work with this composition, since it contains large marble components.

Composition of Venetian plaster

A similar material was used in Italy to create frescoes. Many craftsmen prepared plaster according to their own recipes. But basically the composition was something like this:

Lime was used to bind the components. It was bred with egg white or casein. Crushed pumice or even milk could be added to the composition;
Several layers of soil were laid under the fresco. Crushed straw and sand were added to it, which protected the material from cracking;
Organic paints were used. They were applied using an adhesive solution.

What they look like different variants coverage can now be viewed at. Technologies do not stand still and currently all kinds of additives and resins are added to the elite material to improve the mechanical properties of the screed.

For your information! Adding different dyes allows you to create any shade and pattern with a certain color saturation. Even phosphorescent elements are used, which are made with the addition of luminescent paint.

Making Venetian plaster: useful tips

Knowing the composition of the material, you can knead Venetian. Numerous videos on YouTube will tell you in detail how this can be done.

the dry mixture and water must be mixed in the ratio indicated on the packaging;
stir the composition well using a drill;
the mixture should stand, and then repeat the procedure again, but with the addition of dyes.

Before using the material, take care to properly prepare the surface. The walls must be even and smooth. Bases made of or stone must be primed. Here's how it's done:

surface is processed. In this case, the irregularities are sanded down. The composition should dry within 24 hours;
then the walls are treated with a covering version of the primer, which will improve the adhesion of the surface. You can add a special dye to the primer. This will make the layer of plaster colored.

It is important to properly prepare the surface, otherwise cracks and irregularities will be clearly visible. The material can be applied to any surface. In this case, the color palette can be any. The variant of Venetian marbled plaster is especially popular. A pigment of a certain shade is added before using the composition.

After proper finishing the result is an excellent coating with properties such as moisture resistance, hardness and vapor permeability. After application, the unusual composition begins to absorb carbon oxides from the air, which starts the carbonization process. In this case, a solid film with high performance properties is formed.

You can choose the textured structure of the coating to suit any interior and setting.

Related article:

Videos, photos, features of different mixtures, how to apply correctly detailed instructions, a review of prices and manufacturers, additional tips and recommendations are in this article.

Pros and cons of Venetian plaster

The unusual coating is still popular today, thanks to the following advantages:

durability and wear resistance. The material is designed for 20 years of service. At the same time, it does not lose its shine and performance characteristics;
environmental friendliness. The beautiful coating is completely safe for health, as it does not emit toxic components;
easy care. The coating is easy to clean. You can use not only dry, but also wet cleaning. If necessary, apply detergent;
glow effect. After drying, the coating reflects light remarkably;
tinting possibilities. You can get any shade by adding coloring pigments;
wax protection. Allows you to make the coating resistant to temperature changes;
a large assortment colors and textures.

There are also certain disadvantages. For example, the high price of Venetian plaster and complex preparation before applying the material, consisting of several stages.

Main types of Venetian plaster

You can use luxury material for more than just... Venetian plaster on the ceiling looks good, especially since there is more than one type of such coating to create a design.

Let's look at what types there are:

craquelure is a “semi-antique” coating. Suitable for any interiors and even for. For creating special effect varnish is used when finishing coating. When it dries, it tightens the coating, resulting in an unusual look;

carrara marble can fulfill a real master. Indeed, for such a coating, not only a specialized composition is used, but a large number of layers from 8 to 12. In this case, it is possible to achieve beautiful game iridescence and color;

Marseille wax– a type of decorative plaster with the addition of special wax. This component improves specifications material and provides the surface with shine. The material can be used for rooms with high humidity levels;

Veneto– this technique allows you to create an imitation of polished marble. This material is easy to care for. It can be washed with a sponge and water;

marbello– with this option you can create a matte surface with glossy inclusions.

Related article:

Composition and types of coating, manufacturers, examples of using decorative mixtures, how to prepare it yourself, instructions for application - in this material.

Imitation wallpaper for Venetian plaster

To complete the finishing without noise and dust, you can buy wallpaper with Venetian plaster. This material is a real Venetian, but it is applied more in a simple way. It is worth considering the following materials:

canvases can last up to 10 years with proper care;
designed to serve for 25-30 years.

Even with the relief of the areas, such fabrics are not difficult to wash. They tolerate it well wet conditions and they can be used on or in .

Venetian plaster has many advantages:

the cost is less than decorative plaster;
resistance to mechanical damage;
does not accumulate dust;
allows you to mask joints and seams, which creates a seamless surface;
doesn't lose decorative properties During a long time.

Venetian plaster: photo in the interior

Venetian plaster allows you to make any interior original and unlike other design options. The indisputable advantage of this material is that it can be used not only in any living rooms, but also in rooms with high humidity conditions.

Living room

For the living room, the choice of material is practically unlimited, except by the preferences of the owners. For this room there is no need to select moisture-resistant material, and there are also no special restrictions on, such as, for example, for or. The interior can be relaxing or more bright and rich. Bright examples of Venetian plaster will be an excellent backdrop for a spacious living room, but the room must be well lit.

Venetian plaster in the kitchen: design photo

Decorative plaster is also suitable for, since when special components are added to the composition, it satisfies all the requirements for a given room:

does not absorb foreign odors;
tolerates washing well and does not lose its original decorative appearance;
exhibits resistance to temperature changes.

But, even taking these factors into account, you should not use the material for. In this case, it will be more suitable.

For your information! You can combine the original plaster with wood trim or wallpaper. In this case, you should select a suitable furniture set.

Hallway

You can decorate wonderfully using Venetian plaster. If the corridor is not fenced, then the material can be used in a combined room.

It is not necessary to design all the walls the same way. In different rooms you can apply separate fragments of the image.

For your information! The popularity of this coating is due to such expressive means like highlights, matte touches and shimmers.

Bathroom

If decorative plaster is used for, then the surface should be smooth and even. But even if it's perfect flat surface must be applied protective layer enamel, wax or varnish. For design you should choose more simple solutions that will not clutter up the space. Relief coating is more suitable for spacious room.

Preparation and application of Venetian plaster: application video tutorials

You can watch how to properly make and apply plaster in videos that are widely distributed on the Internet. Let's look at some important steps in the painting procedure.

Before you begin, you should prepare thoroughly. Here's what you'll need:

plaster mixture;
wax and primer;
suede leather;
putty and special trowel;
spatulas of different sizes;
electric drill with a special mixer attachment;
container for mixing the solution;
rags and sponges.

The following surface preparation work is also carried out:

the old coating is removed and the surface is cleaned;
potholes and cracks are filled cement-sand mortar, and minor defects are corrected using putty;
roughness should be removed with sandpaper, and protrusions should be removed with a grinder;
then surface and then finish;
After this, the surfaces must be treated with a primer to increase adhesion.

The application technology can be seen in the video:

Tinting

Required before work. A composition is prepared from a white base and various dyes. This process has a name - tinting. Here are the steps the procedure consists of:

using a tinting fan, select the desired shade;
for tinting you will need a clean sheet, a set of dyes and a narrow spatula;
prepare some plaster and selected dyes;
Take a container of dye and add it to the base. Stir the mixture until smooth;
using a narrow spatula, apply a strip of plaster mixed with basic component. Compare it with in the right color on the fan. Gradually adding dye, you can get the desired shade;
You can also add a second shade.

To give a shade close to natural stone You can drop a little black color. This will also allow you to reduce the brightness a little.

You can see how tinting is done in the video below:

For your information! After drying, the painted surface will become two shades lighter.

Impregnation technique

An important step is the application of impregnation. This can be done with a spray, brush or roller. In this case, the composition in the package should be pre-stirred.

Impregnation should be applied at temperatures from +5 to +30 degrees. This layer will dry in 40 minutes.

Primer application technique

To use the primer, you need to dilute the purchased primer in water. It's better if it's drinkable. The composition must be applied using a sprayer. The wall can be checked within an hour.

How to apply wax correctly

It is worth understanding the features of applying wax. This composition should be distributed using a Japanese or flexible spatula. There are two ways to apply wax to plaster:

using a flexible spatula. Wax will level the surface and slightly smooth it and fill small depressions;
using a sponge. To make the surface of the walls textured, you need to treat it with a foam sponge. In this case, the wax will not fill the indentations.

You can see how to apply wax in the video below:

For your information! To make the finish more luxurious, it is recommended to mix the wax composition with a toner to obtain a golden or pearlescent effect.

Venetian plaster: price per work m²

If you do not, then you will need to find a specialist. Before you negotiate with a master, you need to know what is included in the price for work on 1 m² of Venetian plaster.

One of the cost components is the purchase of materials. You can choose a material coated with enamel or wax. This will affect the cost of Venetian plaster.

The wax option is more expensive, as it is natural.

The choice of color also matters. If you have to buy additional colors, this will increase the cost.

The price of decorative Venetian plaster depends on the manufacturer and the specific store. Special formulations that increase the durability of the material can also affect the price. Such impurities protect against pathogenic microorganisms.

The following factors may also affect the price:

solution application technique. A cheaper option with a textured structure;
reproducing a specific shade also complicates the task;
number of layers. Each coverage is not only an additional expense, but also a waste of time and manpower.

So, let's look at some prices depending on the type of work presented in the table.

Types of services	Price, rub/sq. m
Working with Venetian plaster to create a relief texture	600
Antique design	700
Traditional technique	800
	1200
Plaster to create a glossy surface	780
Author's works	1300

Venetian plaster: price per kg

Before you buy Venetian plaster, let's look at some of its prices.

Photo	Variants and manufacturers	Characteristics	Price, rub
	Travertino	15 kg. Imitation of natural stone.	2970
	Prestige	Fraction No. 4 4. Weight 14 kg.	1523
	Corolite	Acrylic base. 30 kg.	2016
	Modena	15 kg. Turkish marble chips are used as filler.	3150

It's also worth checking out the reviews.

Review by Tanya, Lipetsk: Decorative UNIS plaster Bark beetle - Durable coating, can be painted. For interior and exterior work
Advantages: Does not scratch, tolerates temperature changes. moisture resistant, can be painted many times.
Disadvantages: no
We are renovating the country house and have an unheated walk-through veranda. Intended for undressing, taking off shoes. Create air cushion between the street and the heated room. We decided to finish it with decorative bark beetle plaster. It is intended for indoor and outdoor work. Before applying it, the walls were leveled ordinary plaster, because the bark beetle is already finished
More details on Otzovik: http://otzovik.com/review_3875854.html

Maliakisa, Ekaterinburg: Decorative plaster Derufa - PRESENTABLE, impressive
Advantages: durable, elegant look, environmentally friendly, masks wall unevenness
Disadvantages: price
I am a designer. All new interesting solutions For the interior, I try to test it in my apartment before offering it to the customer. So I first applied decorative plaster to the walls in my bathroom, and then began to include it in design projects for a client. The choice in favor of this material was due to the fact that it is very practical.
More details on Otzovik: http://otzovik.com/review_3210253.html

Article