Paintable wallpaper has changed the approach to the problem of permanent room design. With their help, boring shades can be easily changed. The main thing is to approach the painting process itself correctly. It should be noted that painting wallpaper is a serious matter. It would seem that here is the wallpaper that needs to be painted (see photo below), here is the paint for it. But it is not regular wallpaper, there are several types of them, so the painting process itself will depend slightly on what material is chosen for finishing the walls.

Types of wallpaper for painting

There are three types of wallpaper for painting. All of them have high moisture resistance, they have a relief coating, no color pattern, plus they hold paint well. Moreover, all three categories differ from each other in the raw material from which they are made. The only thing they have in common is that they can be painted and repainted several times. Almost all wallpapers of this type are sold unpainted. Some manufacturers offer painted pastel shades: beige, grey, pink or cream as shown in the photo above. But they are easy to paint over.

Paint for painting wallpaper

An important question that worries consumers is what paint to use for wallpaper. It is clear that any painting material will not work here. As with the wallpaper itself, there are three varieties.

• Water-based paint.
• Water-dispersed.
• Latex based.

The first two positions are water-based paints. It’s just that the first has a smaller filler fractionation, the second has a larger one. That is, in the first type of paint, the filler particles are smaller in size compared to the second. In this case, the water-based emulsion can be easily removed with a sponge and a small amount of water. Dispersion paints They form a dense, durable film on the treated surface that cannot be removed with water. For this you can only use a solvent. In addition, they dry quickly because they contain a polymer - acrylic.

Latex paint is the most expensive option in this category of paint and varnish products. But applied to wallpaper it creates conditions for their long-term use. They have the highest water-repellent characteristics, do not fade under the influence of sunlight, and have excellent strength. Typically, this paint is used in rooms with high air pollution, for example, in kitchens. In addition, wallpaper coated with latex paint is easy to clean, and the paint itself does not come off the wallpaper surface.

Attention! If latex paint is used to finish paper wallpaper for painting, then its surface becomes glossy look. But it is important to pay attention to the fact that each such paint has its own degree of gloss, which is indicated on the packaging.

And a few more tips.

• Non-woven wallpaper for painting is best painted with acrylic or latex paint.
• In damp rooms, you should not paint wallpaper with PVA-based paint.
• Before buying paint and varnish material, you need to calculate its consumption so as not to buy too much. The packaging usually indicates the consumption per square meter. It is multiplied by the area of ​​the walls on which the wallpaper will be pasted. This will be an expense. But experts recommend adding another 10%.

There are several points regarding paint consumption. Typically, for painting wallpaper in one layer, its consumption is 150-180 g/m². If application is made in two layers, then the consumption indicator increases to 250 g/m². It should be noted that painting wallpaper with a rough surface is more economical, especially for glass wallpaper.

Painting technology

Before you start painting wallpaper that has already been hung, you need to prepare several tools and equipment. These are several rollers: one with middle length pile (photo below), the second round, with which you can easily paint the corners of the room. A brush that will help paint the edges of pasted wallpaper. A tray where the paint will be poured.

Now let's prepare the paint itself. This is a ready-to-use material, but the first layer applied will act as a primer. Therefore, part of the paint must be diluted with water in the following proportion: one part water, ten parts of the material itself.

First of all, paint the edges of the wallpaper and the corners of the room using a brush or round roller. To do this, place a wide spatula on the upper edge of the laid finish. It will create a barrier that will close ceiling surface so that the paint does not get on it. It is necessary to paint downwards from the spatula by 8-10 cm.

Then, using a regular roller, the diluted paint is applied to the wallpaper. The material must be laid vertically, as in the photo above, no side or horizontal stripes. After completely covering the walls with primer, you need to give them time to dry. This is usually given at least one hour. After that, the main coating with undiluted paint is carried out in exactly the same order.

Choosing the right shade

Currently, manufacturers offer both pure white paint for painting wallpaper, and with a fairly wide shade model range. But, as practice shows, many consumers choose white version, so that you can then independently adjust it to the required shade, doing it yourself, simply by adding color (pigment).

The easiest option is to pour the color into the paint and stir the mixture thoroughly, as shown in the photo. But this one simple option obtaining the required shade is negative side. Firstly, after the paint dries, the wallpaper may not have the shade you expected. By the way, this happens quite often. Secondly, this method is better to use, so to speak, in general. That is, they merge into one large capacity all jars, into which pigment is then added. If mixing is done separately with each jar, then the probability of color mismatch in each case with other jars is very high.

Therefore, it is recommended to use another more advanced option. To do this, you will have to use special computer equipment for mixing paints. It is important to remember the paint and color code here. Next, the computer itself will determine in what quantities, what paint and color should be mixed. Such installations are commonly used in automotive paint shops.

Wallpaper shades for rooms

Sometimes it is difficult for an ordinary person to independently choose one or another shade of paint for wallpaper. So here are some recommendations from designers.

• Light pastel colors visually expand the space of the room. The same can be said about glossy surfaces. Therefore, the color of such paints is usually used in small spaces.
• Dark blue or black color makes the room dull and gloomy. Therefore in living rooms it is better to refuse them. Although there are many creative designers who often use such paints, they apply them to sections rather than to entire walls.
• Bright colors (red, orange) are often used to focus attention on certain area. True, a person quickly gets tired of such colors.
• Warm colors (pink, yellow) create coziness in the house.
• Brown, blue (photo above), green are natural colors that will suit any room.

In general, paintable wallpaper makes it possible to repeatedly change its color. Therefore, you can safely experiment. For example, paint the bedroom as shown in the photo above, red. Let's face it bold decision. But if you get tired of such an interior, and you get tired of it quickly, then you can easily repaint the walls in a different, calmer tone. True, you will have to paint over the red color in two layers.

Conclusion

But what's most interesting when it comes to coloring. Whatever you say, this is a rather serious process with acquisition costs paint and varnish materials. Maybe that's why you shouldn't rush into painting. Maybe it’s worth purchasing wallpaper of the required color, since the market building materials today this can be done. That's a good saving Money. In addition, it is always possible to change the color of the laid wallpaper by simply repainting it in a different selected color.

The stores offer a huge selection of paints and varnishes. Even a professional can easily get lost in this diversity. The article discusses the issue of choosing paint for wallpaper and painting methods.

What kind of wallpaper paint is there?

High-quality wallpaper pasted for painting can be painted on any modern paint, used for walls. Water-soluble paints are often used, i.e. those where water is used as a solvent. They practically do not smell, dry quickly, using special bases and additives, the paints provide a wide range of consumer characteristics. They are divided into acrylic, latex, polyvinyl acetate, water-based and water-dispersed. Each type has pros and cons.

• Acrylic. Basic component — acrylic resins. They form a wear-resistant, moisture-resistant coating that does not fade in the sun. The most expensive among water-soluble paints.
• Latex. Manufactured using latex. They create a durable, washable coating film, have good wear resistance, but are susceptible to fading. The film also hides minor surface defects.
• Polyvinyl acetate. Also called “PVA paints”, they are produced on the basis of PVA glue. They cost less than other types and are practically non-moisture resistant.

Not long ago, specialized paints appeared on sale, for example Dulux Easy, which allow you to paint absolutely any type of wallpaper.

They are divided according to the degree of gloss into matte, semi-matte, semi-gloss and glossy. Most paints are sold white; they can be given different shades using special tinting compounds or tinted upon purchase by choosing a shade in the catalog.

What wallpaper can be painted?

Modern industry offers several types of wallpaper, specially designed for painting, differing from the usual ones in the absence of a printed pattern. They are divided according to material into linkrust, glass wallpaper, non-woven, vinyl and paper.

Linkrust

Linkrust is a coating for walls with a highly embossed structure, made by applying a special mass of natural materials, for example, wood flour and linseed oil. The design often imitates stucco. Due to its strong relief, it is difficult to paint with rollers; painting with a spray gun is recommended. It has a dense structure, wet cleaning is allowed. Can be repainted several times.

Glass wallpaper

Made from fiberglass. Fiberglass threads are intertwined in a special way to produce patterns of different textures, then impregnated with a special composition to impart stability, usually a mixture based on modified starch. Advantages and features:

• They don't burn.
• Do not support combustion.
• Easy to clean.
• Thanks to the woven structure, they do not interfere with air circulation.
• Multiple repainting is allowed.

Non-woven

Non-woven fabric – non-woven fabric based on cellulose, bonded with a special polymer. Due to the special structure of the fibers, non-woven wallpaper has a different texture, including volume. However, smooth paintable wallpaper is also widespread; by gluing it, you can do without labor-intensive finishing putty.

Vinyl

With applied on front side vinyl covering. More functional than just non-woven ones. Can be repainted up to 10 times.

Paper

Paintable wallpaper made of paper differs from ordinary wallpaper in the absence of a pattern and multi-layered nature. As a rule, these are 2, less often 3 layers of paper glued together. Filler can be placed between the layers to add texture. The least expensive of all wallpapers for painting, however, the most “capricious” during operation, they are afraid of mechanical damage and moisture. Very inconvenient when gluing, because... The glue is applied to the canvas, which gets wet and can fall apart in your hands.

How to paint a wall covered with wallpaper for painting

Options for painting walls covered with wallpaper vary depending on the area to be painted, the chosen composition and the painting method - with a brush or a spray gun.

How to choose paint

Depends on the purpose of the room in which the renovation is being carried out. For example, in the kitchen or children's room, it is important to use washable paint that can be washed frequently. wet cleaning and resistant to detergents, in corridors public buildings– having high wear resistance; in medical institutions – special paints with an antibacterial effect, etc. The rules for choosing paint for wallpaper and when choosing paint for putty walls are the same.

Which roller to paint with?

Any roller can be used, but paint manufacturers recommend using fur or velor rollers with medium pile (6-10 mm) for this type of work. For additional decorative effect You can use a texture roller to apply a second or third coat of the main shade, or to apply a layer of a different color.

How many layers of paint will be required

Usually 2 layers are enough, but, for example, when painting in bright hues dark base, 1-2 additional coats may be required.

Step by step guide

To paint the walls you will need:

• Roller (180-300 mm, the wider the better, but it is important that the roller is comfortable to hold).
• A narrow thin roller or brush for removing corners.
• Paint tray with a special surface for rolling out a roller.
• Facade spatula with a width of at least 250 mm.
• Masking tape.
• Mixer for paint.
• A container for mixing paint if you plan to paint yourself.
• Damp cloth.
• Broom or vacuum cleaner.

First of all, clean the base from dust with a broom or vacuum cleaner.

You should carefully check the quality of the wallpaper sticker, Special attention paying attention to the seams.

Poorly taped seams will come apart when the paint dries. It is recommended to fill up any defects found on the wallpaper using wood putty or acrylic sealant. The seams can be glued to the paint that will be used for painting.

The paint should be mixed thoroughly. Thick paint can be slightly diluted with water.

If the paint is tinted independently, it is necessary to tint the entire required volume of paint in one container at once to avoid differences in shades.

Initially, the corners are painted with a narrow roller or brush, then the main plane of the wall is painted with a wide roller. follows horizontal movements with the maximum possible amplitude, without changing the pressure on the roller. The speed of movement of the roller is selected experimentally, fast enough to avoid drips, but at the same time so that there is no splashing. It is recommended to avoid pauses while painting one wall. If the paint is poorly painted or streaks appear, apply another layer.

It is recommended to paint a piece of wallpaper, wait until the paint dries, apply it to the surface that you plan to paint and see how this shade will look on this wall. You can also tint a small jar of paint in the store in the chosen shade and look around.

If adjacent planes cannot be sealed with masking tape, for example, when the base is weak to protect the surface, use a façade spatula. The spatula blade is placed in a corner, the plane is pressed tightly against the surface to be protected, and the desired area is carefully painted with a narrow roller or brush.

In , like in any other construction work, there is nothing complicated, but accuracy and adherence to the manufacturer’s recommendations are important.

Useful video

High-quality wallpaper is the key good repair. They are like a canvas for an artist, so their quality will largely depend appearance walls Accordingly, the choice should be approached thoroughly.

There are many materials for this purpose on the market. Everyone will find a suitable option according to their wallet and needs.

Interesting to know! Wallpaper to be painted is usually wider and longer than usual, so it’s time to stick standard room 2 or 3 rolls are enough.

Types of wallpaper

There are three types of wallpaper intended for subsequent painting, each of which has its own set of characteristics.

- the simplest and inexpensive option. They consist of two layers (base and front surface), each of which is impregnated water-repellent composition. The material is pliable, easy to glue and inexpensive, but in terms of density and mechanical strength they are significantly inferior to their competitors.

non-woven base– this material is much stronger, when gluing it does not require impregnation with glue (it is enough to apply only the wall), it is resistant to abrasion, and allows steam to pass through, which helps to establish a natural microclimate in the room.

It is covered with a textured pattern, although there are options without it - see photo above. The design is made from foam vinyl, which means it is lightweight and not susceptible to moisture. More high density and thickness allow you to hide minor flaws in the surface of the walls. They are many times more expensive than their paper counterparts, which is not surprising.

Glass wallpaper What sets them apart from others is their incredible strength and durability. They will serve for so long that they will get tired of them - just kidding, of course! Their prices are appropriate.

When gluing, a seamless fabric is created on the surface of the wall - its illusion. They adhere well and perfectly mask larger imperfections on the wall surface due to their high density. The material does not allow moisture to pass through, does not attract dust and is fireproof.

Texture of wallpaper for painting

The appearance of wallpaper for painting, not counting the color you paint it in, will depend on the existing texture. The following types of surfaces exist:

• smooth - we have already mentioned them;
• with small and large drawing– and the drawing itself can be performed both in the form of chaotic and plant patterns, and in the form geometric shapes. The scope for choice is simply enormous;
• fabric imitation - the most expensive solution. The better and more natural the performance, the higher the price.

Selecting the texture of a material is quite a troublesome task, since the pattern should be selected for specific design solutions, additionally focusing on the dimensions of the room itself, the appearance of the furniture and various accessories that will be installed here. Therefore, it is better to entrust this matter to a professional.

Prices for various types of wallpaper for painting

Wallpaper for painting

Choosing paint for the interior

To paint wallpaper, water-emulsion (water-dispersion) compositions are used, which are perfect for any surface. However, it is worth paying attention to the composition of the material; the surface properties will depend on it.

1. PVA-based paints are the most short-lived and quickly turn yellow.
2. Silicone.
3. Latex paint.
4. Acrylic.

The Tikkurila company is one of the world leaders in the production of paints and varnishes.

The last three options are used in combination with wallpaper, although no one forbids covering other materials with them. In fact, the choice of composition depends less on the type of surface, but on the purpose of the room where it is used.

1. If we're talking about about the bathroom or kitchen, then the main contenders will be latex and silicone compounds. They are more expensive, but everything is determined by the properties of these materials. They are capable of creating moisture- and vapor-proof coatings on the painted surface, and it can be washed without fear of damage.
2. Latex paint also performs well where the walls receive a lot of sunlight. It does not fade from ultraviolet radiation and retains its original shade for quite a long time.
3. PVA paints cannot be washed, so they are used only in dry rooms where there is not a lot of natural light.

Also, paints will differ in the type of surface they create. There are four options in total - matte, semi-matte, glossy and satin. Each option is selected according to the interior design. Matte and semi-matte paints are good for ceilings. It is better to use them with embossed wallpaper, as the material will highlight all the unevenness of the base. Glossy ones have this effect to a lesser extent, so they are also good for smooth surfaces. This paint has a noticeable shine, which will visually increase the size of the room. Satin paints look chic - they look like silk and the fabric of the same name - satin. It is better to paint walls with them in living rooms and bedrooms. This will add comfort and a special elusive touch of luxury.

Paints are available for sale either white or colored. White ones can be tinted yourself. What to give preference to? We will name the facts, and draw your own conclusions.

Option 1. Buying colored paint from one batch, you guarantee the uniformity and uniformity of the color you get in the end.

Option 2. However, you may want to find a color that is not readily available. But white paints can be tinted in many shades. The disadvantage of this approach is the possible differences in tone - they are guaranteed when tinting several buckets yourself.

Alternatively, you can use the tinting service at the store where the paint is purchased. But remember that this service is quite expensive - sometimes no less than the paint itself.

Prices for different types of wallpaper paints

Wallpaper paint

Video - DIY paint tinting

Working tools

So, the wallpaper is pasted. How to paint them now? In this chapter we will look at full list tools and devices.

Table 1. Required tools.

Tool, photo	Description
	To work, you will need at least two pieces - large and small. The first one performs the bulk of the work, and the second one conveniently paints surfaces in hard to reach places oh and in the corners. Advice! If you paint the wallpaper in different colors, then buy your own set of rollers for each. There is no need to wash them to work with a different color, especially when transitioning from a darker tone to a light one, since due to poor washing, changes in tones are possible, which will be noticeable to the eye. Pay attention to the material from which the roller is made. You should not take models with long pile, as they give a rough texture and can leave untidy smudges. Also discard the foam nozzle, as they leave bubbles on the surface.
	Also stock up on brushes, as there will always be places that cannot be reached with a roller. Do not take the cheapest tool, as the creeping lint will spoil your work and your mood. The same applies to rollers.
	When working with a roller, you cannot do without a paint tray. Buy yourself a version with side grooves along which the paint will easily flow back into the container, and with ears in the corners, as shown in the photo. From such a tray it will be much more convenient to pour the paint back into the bucket.
	Masking tape is truly an irreplaceable thing. It is used to protect surfaces that you don’t want to get dirty, but not only. With its help, you can make patterns with gaps on the wall; as a result, after painting, when the element is removed, an unpainted area remains. In other words, you can make your own stencil for a geometric pattern. They can also make a clear boundary between two colors.
	A stepladder, trestles or a reliable table are also indispensable. You understand this especially when you have three-meter ceilings above your head.

You can also add to the list plastic film, which can be used to cover the floor, as well as a clean rag for quickly removing splashes from different surfaces.

Prices for folding stairs

Folding ladder

Before starting a job, you need to make sure that certain conditions are met.

1. From the moment of wallpapering, at least 2 days must pass for it to dry thoroughly. Better yet, wait all three days.
2. Remember that when painting wallpaper for the first time, you will need to apply at least 2 layers, otherwise there will be differences and bald spots that may go unnoticed during work. New layers are always applied after completely dry previous ones - the instructions on the package will tell you the exact time.
3. Fiberglass wallpaper must be primed before painting. For paper and non-woven fabrics such preparation is not required.
4. It is necessary to remove all traces of glue from the surface of the wallpaper, otherwise the paint will apply unevenly and bald spots will appear, which will then be very difficult to remove.
5. The paint should have the consistency of liquid sour cream. If, upon opening the lid, you see that it has thickened, add water, but not more than 5% of the total volume.
6. The optimal air temperature is +17… +22°C.

Work order

Table 2. Painting instructions

Steps, photo	Description
	All places that you are afraid of getting dirty must be taped with masking tape. In particular, these can be door frames, sockets, window frames And so on. At the same time, be careful that the tape does not go into the wallpaper, otherwise you will end up with a gap after painting.
	Lint may fly off the new roller and remain in the paint on the walls. To prevent this from happening, you need to clean it. We use for this masking tape, which one person pulls and the second rolls over it with a roller, across its entire width. The loose lint will remain on the adhesive paper.
	In order not to stain the ceilings, baguettes and other elements to which the wallpaper fits with the rollers, we make a neat outline in this place using a small brush. In order for the roller to paint everything else well, it is necessary that the stroke be 5-7 cm wide.
	We increase the size of the outlines with a small roller. If there is already a painted ceiling nearby, then we work carefully, do not wave too much so that the splashes do not stain this surface.
	Then we take large roller, thoroughly saturate it with paint, roll it over the tray and begin painting the main surface of the wallpaper. We try to remove all smudges immediately, as they can harden, which will ruin the appearance. We paint in a vertical direction - up and down. Don't stretch the paint too much large area, make sure that the layer is as uniform as possible.

Finally, let's give one small, but very helpful advice. Before pouring paint into the tray, wrap it in a regular ruble bag. This way you will save the tool in pure form, and you can quickly clean it when leaving work, or if you need to change the paint color.

Tray in a plastic bag

Video - How to paint wallpaper. Secrets of the professionals

Painting wallpaper is one of the popular types of finishing, which provides long-lasting aesthetic appearance interior and will allow you to change the color of the walls at any time.

Painting wallpaper for painting yourself is not particularly difficult.

The main thing is to choose the right working material and tools.

What wallpaper can be painted?

When choosing wallpaper for painting, it is important take into account their structure, coating and thickness. Not all types of wallpaper can tolerate pigment well.

With the quickly established fashion for painted wallpaper, manufacturers of finishing materials began to produce special wallpaper for painting. Their main advantage is strength, wide variety color range and good pigment sensitivity:

Which ones are better to choose?

Most best option – non-woven and vinyl wallpapers . This type of finishing is intended specifically for painting. Let's look at their differences, advantages and disadvantages.

Vinyl

This type of wallpaper consists of two layers. The first is paper, the second is PVC. Due to this, they have high strength and elasticity. Their main advantage is fire resistance and water resistance.

They can be washed with water and cleaning agents.

After cleaning, the top layer will remain in its original form. Such wallpaper are not afraid of direct sunlight, which means their color will not fade and will retain its original brightness for a long time. Vinyl wallpaper is not afraid of mechanical damage either.

Wallpaper layers impregnated with a special antifungal composition, which does not allow high humidity mold will form. Therefore, they are often glued in the kitchen and bathroom.

They come in a wide variety of shades and textures. Manufacturers produce coatings that imitate tiles, wood, fabric and even leather.

There are vinyl wallpapers three types:

1. Foamed.

They have a textured surface, making them ideal for finishing uneven walls. The only negative is that they are less moisture resistant.

2. Silkscreen printing.

They differ in the content of silk threads in the layer. They retain their color and structure for a long time, but are more expensive than their analogues.

3. Washable.

Washable vinyl wallpaper is most often used for finishing baths and kitchens. Their waterproof surface protects walls from moisture and fungus. They are easy to clean, withstand constant humidity, and do not fade.

The disadvantages include the presence of a synthetic layer that does not allow air to pass through and releases formaldehyde.

Non-woven

Non-woven fabric is made of cellulose bonded with polymer fibers. In its composition it is close to ordinary paper wallpaper, but unlike them, it has increased strength and fire resistance. This type of finish allows air to pass through well, allowing the walls to “breathe.” Another advantage is that dust does not settle on the surface.

Non-woven wallpaper does not require special care. To remove dirt, use a damp cloth or sponge. They are not afraid of water, are not subject to fire and fading.

Their undoubted advantage is that when re-repair they do not need to be torn off from the walls - new wallpaper can be glued directly to their surface.

The only downsides we can highlight are susceptibility to mechanical stress. On top layer Scratches and cracks can easily form if you protect the walls from the influence of external factors.

Unlike vinyl wallpapers, non-woven wallpapers are much more expensive, and the design solutions are not particularly diverse.

Painting wallpaper is a very responsible process. After all, in order to get the desired shade, you will need to master tinting - mixing several colors. For painting, as a rule, choose white wallpaper.

If the shade is not particularly important to you, and you do not want to spend more money and time on repairs, then you can stop your choice on colored wallpaper.

Primer before painting

Before you paint the wallpaper, you will need to prime it. This will allow the paint to adhere better to the surface without streaks or bald spots. In addition, using a primer you can reduce paint consumption and strengthen the fiber. For the procedure you will need:

• wide roller;
• paint brush;
• plastic pallet;

Before you begin the process, cover the baseboards and floor with newspaper or plastic. Make sure that the glue under the wallpaper is completely dry and the walls are ready for further work.

Pour the primer mixture into a tray, dip the roller in the liquid, gently squeeze or shake off the excess and get to work. Don't type on the roller a large number of solution, since in this case it will flow down the wall.

In some hard-to-reach areas of the wall (under the window sill, corners, near radiators), use a paint brush. It is not convenient to work with a roller in such places.

Treated walls dry in about 12 hours. Only after the primer has completely dried can you begin painting.

How to paint correctly without streaks?

To avoid streaks and smudges, you should follow several rules:

1. Exposed areas of walls should be painted with a roller, not a brush.
2. Painting should be done in two opposite directions, with the final movement being done from top to bottom. This will help avoid streaks and give the right visual effect.
3. Apply paint thin layer. You should not put too much paint on the roller, as during operation it may drip down, forming smudges. Before bringing the roller to the wall, carefully shake off any excess compound into the tray.
4. Try to move the roller evenly with equal pressure, evenly distributing the pigment over the surface.
5. The first thing that needs to be painted is the areas under the ceiling and near the baseboard.
6. You can start painting from a window or corner. You should not approach this process chaotically. Visually divide the wall into sectors and carefully paint each of them.
7. To prevent smudges and stains, blend the paint with a dry roller, carefully walking it over the surface. This is not necessary if you get an even layer the first time.
8. After the paint has completely dried, apply a second layer in the same way as the first time.

The drying time of painted wallpaper depends not only on the choice of paint, but also on the temperature and humidity of the air in the space. At room temperature with normal humidity, acrylic paint dries within 1-1.5 hours, and during 30-60 minutes.

How many times can you repaint old wallpaper?

The durability of wallpaper for painting is confirmed by the fact that it can be repainted and updated up to 10-15 times.

If this is a surface with a pronounced relief, then be prepared for the fact that after each coloring it will gradually smooth out, losing the original pattern. The canvas itself is from frequent painting works will not suffer at all. Resists repainting much better smooth or fine-textured wallpaper.

Which roller and paint should I choose?

When choosing paint, be guided by its characteristics and purpose. Selected for this or that type of wallpaper different types paints

Water-based paint has a number of advantages - environmental friendliness, durability, lack of a specific odor, ease of application, affordable cost. In addition, it dries quickly.

Acrylic paint Suitable for working with most types of wallpaper. Doesn't have unpleasant odor, contains antifungal additives.

For non-woven and paper wallpaper, any paint on water based. When working with vinyl wallpaper, it is recommended to take acrylic paint latex based. If the vinyl wallpaper is non-woven based, then water-based wallpaper is also suitable. Both water-based and acrylic paints are used to paint paper wallpaper.

To obtain the desired shade, white emulsion or paint mixed with colors. This is a rich pigment used to impart the required color to liquid, non-woven and vinyl wallpapers.

Tinting- enough difficult process for newbies. Getting the right shade of paint can take a long time. The most important thing is to mix the paint and color in the right proportions.

The first time the result may not meet expectations, so designers recommend experimenting with a small amount of paint first. As soon as you manage to get the desired color, the color and paint need to be mixed in a larger volume while maintaining the original proportions.

When tinting, don't forget to test the shade on a scrap piece of wallpaper to see how it will look on your walls.

The choice of painting tool sometimes affects the quality of the finish more than the paint itself. It is recommended to use fur roller with long pile. If you don’t have one at hand, you can tightly wrap a piece of an old faux fur coat onto a regular roller.

What is the advantage of such a tool? Due to long pile he carefully paints the surface relief throughout its entire depth. Foam rollers are not suitable for these purposes, since they work only on the surface layer of the drawing, which means they can leave behind bald spots.

To work corners and hard-to-reach places, use a narrow paint brush and short (up to 50 mm)

Ideas and color solutions

In order for painted wallpaper to fit harmoniously into the interior, you need to think through color, pattern and texture options in advance. finishing material. Wallpaper manufacturers today offer wide choose a wide variety of wallpapers for painting - embossed, smooth, with a wood, brick texture, masonry and others.

Perfect for a child's room textured non-woven wallpaper pastel shades – peach, beige, cream, pink, blue. Moreover, there are special children's embossed wallpaper-coloring pages that allow the child to feel like an artist or interior designer.

Embossed wallpaper with natural textures - stone, brick or leather - looks harmonious in the office. When choosing a paint color, try avoid bright, neon and dark shades. Remember that the environment greatly influences the work environment in the office.

The ideal option is wallpaper with a fine texture or smooth surfaces. You should not glue wallpaper with a three-dimensional relief in this room, as it gives a feeling of rigor and officiality. As for the paint shade, pastels will fit well here. calm colors palettes.

Looks beautiful in the bathroom volumetric textures - in the form of tiles, bricks or other geometric elements. Optimal shades are blue, green, purple, black, gold, gray, red. If the bathroom is small, then you can visually expand the space using white wallpaper with a fine texture.

In the living room you can use any textures and shades you like. Just remember that volumetric relief surfaces visually “eat up” the area of ​​the space. Therefore, in small rooms it is recommended to glue fine-textured wallpaper.

If you want to diversify the interior of the room in an interesting way, giving it some zest, you can paint one wall with one color, and the opposite or adjacent wall with another. This will increase the space and visually divide it into zones. The only thing that needs to be taken into account is the combination of shades.

Painted wallpaper is not only modern solution, but also practical. Tired of color? It can easily be repainted into something else. Has your wallpaper gone bad? It is not necessary to peel them off in order to stick new ones - you can lay them on an existing layer.

Ease of use and a wide variety of wallpapers and paints make this type of decoration popular among most people.

Find out how to properly paint wallpaper with your own hands from the video:

Painting wallpaper is the most suitable option for wall decoration for connoisseurs original design. Properly painted wallpaper will help transform ordinary walls and change the atmosphere in the room without resorting to large-scale repair and preparatory work.

If you need to change the wall decoration, it is not necessary to re-paste the old wallpaper. To do this, it is enough to hang wallpaper once for painting and each time apply different shades of paint, giving freshness and novelty to your interior.

Painting wallpaper will allow you to make your desires come true as best and cheaply as possible, because it is very rare to find wallpaper that will ideally meet your expectations and requirements. Wallpaper manufacturers are unable to predict all the needs of their consumers, so the only way out of this situation is to paint the wallpaper.

Painting the wallpaper in the nursery yourself

Today, the question “how to paint wallpaper” disappears by itself, because now there are many technologies that will help make any of your wishes a reality. design solution. You can easily achieve the ideal tinting not only by mixing different shades yourself, but also by computer selection.

Gluing the canvas for painting is not a difficult procedure, so even a non-professional can easily handle it. To perform it, you do not need to acquire certain skills; accuracy and following the dyeing technology will be enough.

In our article we will talk about how to paint wallpaper correctly, and also talk about what kind of wallpaper can be painted.

Which wallpaper to choose?

1. Paper

Paper materials are the most common products on the building materials market. The main advantage of paper wallpaper is its low cost, because the cost paper sheets much cheaper compared to competitors. Now on the market you can find both single-layer paper and multi-layer variations.

Despite certain advantages of paper sheets, it is better not to choose them as a base for future painting, because they are unlikely to withstand paint coating and your financial and time expenses will be in vain.

But there are still exceptions to every rule. If your walls have already been covered with paper wallpaper and you do not want to remove it, you can paint it, but such walls will need to be pre-coated with an acrylic primer, which will reduce the possibility of getting wet and distorting the texture of the canvas.

1. Vinyl and non-woven

Non-woven fabrics are made from cellulose, which is modified with polyester fibers, which helps increase their strength and moisture resistance.

Vinyl coverings are produced on the basis of non-woven fabric. The production technology is as follows: a layer of PVC is applied to the non-woven fabric, which is a protective and decorative function.

Painted wallpaper as interesting design solutions

These types of wallpaper tolerate paint very well, and sometimes the coating can be applied more than once. That is why it is best to choose this material for wall decoration as a base for painting.

1. Glass wallpaper

Fiberglass wallpaper is wallpaper made from fiberglass. Fiberglass wallpaper is environmentally friendly, vapor permeable, and has an increased level of strength.

Fiberglass wallpaper can be called a unique material, because they differ high level strength and fire safety, environmentally friendly and do not interfere with moisture exchange between the wall and the air.

But this is not all the advantages of glass wallpaper. A material such as glass wallpaper is easy to stick and acts as protection for structures from possible cracking - the high reinforcing properties of glass wallpaper have been known for a very long time.

Fiberglass wallpaper is produced specifically for further painting, therefore it is considered the most suitable option for reusable coloring.

But glass wallpaper also has some disadvantages, the main one of which is their high cost.

What you need to know about paint?

When deciding what paint to paint the wallpaper with, it would be better to opt for water-dispersed compositions. You can also use acrylic or latex paints, which will also cope with this task without any problems. Such compositions are very elastic, do not contain an aggressive solvent, and also do not affect the nose with unpleasant aromas.

Water-based paint is a less durable material that is exposed to excess moisture. But, its use is possible.

For this type of work oil paint and it is better not to use enamel. These substances contain aggressive solvent components and differ low level elasticity and pungent odor.

Approximate paint consumption is shown in the table below.

Wallpaper coloring technology

Before you start painting wallpaper, you need to carefully prepare the surfaces:

• clean and dry;
• remove contaminants;
• degrease oily areas using a foam sponge.

Be careful, because wet cleaning can only be carried out on washable surfaces or painted with moisture-resistant paint. If the walls are covered with other materials, it is better not to carry out wet cleaning.

Next, coloring components are added to the paint. Colorants in the form of a paste will be correctly added to a container of paint, while dry pigments need to be pre-mixed with water. Mixtures based on water-emulsion or water-dispersion sometimes need to be diluted with water according to the instructions in order to achieve the required consistency.

Please note that it is correct to pigment the paint only once in the required quantity, because it will be impossible to achieve the same color when mixed again.

To apply paint to the surface of the walls, it is best to use a roller, brush or a specialized remote control. The last option is the most suitable, because the use of such a device involves spraying paint, and this, in turn, does not damage the integrity of the wallpaper. But, the use of such a device requires certain skills and abilities from the master.

If you don’t have specialized devices at hand, and you decide to use mechanically, give preference to using a roller. In this case, you will also need a brush, but only for painting corners and hard-to-reach surfaces.

It is best to buy rollers made of natural pile or velor. Such tools will help to perfectly paint even a relief coating, without leaving air bubbles on the surface.

The use of a foam roller is possible if the structure has a deep embossed pattern. It is with the help of such a roller that you can paint only those areas that the design requires, without penetrating into the inside of the canvas.

We paint wallpaper with our own hands

As a rule, paint should be applied in a thin layer, trying to avoid unnecessary sagging and streaks. Do not try to cover the entire surface with a thick layer of paint at once, because you can easily correct all small errors when you begin to apply the next layer.