The well-known company Bas has gained wide popularity thanks to the use of two modern technologies for reinforcing bathtub surfaces. The first option is based on reinforcing the Bass bath using polyester resin with special glass fiber. The second technology involves the use of absolutely safe, environmentally friendly, high-density two-component polyurethane foam.

Modern baths

Currently full the lineup companies represent:

• Bass acrylic bathtubs;
• curtains for them;
• showers;
• special shower enclosures.

30 modern models They have classic rectangular, asymmetrical and symmetrical shapes. All products are manufactured in strict accordance with advanced Italian and American technologies using original equipment.

Any Bass bathtub is molded using special vacuum forming machines produced by the famous Italian company SELF. When operating such equipment, infrared heating of certain areas is used. This method allows you to bend the base sheet into any desired shape.

Popular Bass models

At the moment, the Bass acrylic bathtub is the best option in the price-durability ratio for many citizens of our country. The most famous models all corner baths are considered, with an elaborate curved shape, allowing you to save space and refine appearance rooms.

Let’s take a closer look at three unique models that will satisfy any requirements of the most demanding users:

1. Bass bathtub Laguna - the maximum volume of water up to the protective drain hole at the top is 295 liters. The depth of the side asymmetric model in the center is 44 cm, and the height of the screen itself is 55 cm. Electrical characteristics of this bath V – 220/240. Electrical wiring for power electronic elements performed using an RCD. The standard package includes:

• metal carcass;
• front panel;
• convenient removable legs for installing a bathtub and a drainage device.

Additionally, this model is equipped with: a cascade, safety handles, special nozzles for a relaxing massage of the back and legs, a headrest, lighting and a pillow for the switch button.

1. Bathtub Bas Alegra – this model has a smaller volume. A total of 220 liters. But it fits perfectly into small bathrooms in Khrushchev-era buildings. Maximum depth in the center is 45 cm, and the screen height is 56 cm. The classic equipment is the same as the previous model, and there are the same additions to it: headrest, handles, nozzles, cascade, button pad and backlight. This bathtub is very practical and easy to use, popular with young couples who have no difficulty in climbing over a fairly high side. Low price goes well with high functionality. This is the brainchild of Bas - a new generation acrylic bathtub with comfortable corner place made from durable materials.
2. Acrylic bathtub Bass Nicole - enough. Apart from the shape and volume, this model is no different from the previous one. The maximum volume is 290 liters. It can be easily installed in the space between two walls or in a small niche, which are still found in former communal apartments. This is possible thanks to two straight sides on both sides of the product. The stock has a rectangular shape, slightly elongated on one side. If necessary, this bathtub can be equipped with a vertical stand for hydromassage and a special original curtain for this model.

Please note: power supply to all models is carried out through an RCD, so it is necessary to ground this device. Otherwise, using such a bath will be unsafe for humans.

Advantages of acrylic bathtubs

Recently, Bass baths have become increasingly popular, but what are the main advantages of such devices?

Users and installers of plumbing accessories note: whole line advantages of such baths.

1. Unlike steel and cast iron counterparts, acrylic Bass bathtubs are light in weight and have very high strength, which was not available to non-metallic products for a long time.
2. Even when not filled with boiling water, they have a temperature that is pleasant for humans and do not allow the collected water to cool for a long time. This property is achieved through the use of acrylic, which has very low thermal conductivity. On average, in 30 minutes the water will cool down by only one degree Celsius.
3. All similar models bathtubs have ergonomic shapes, specially created to fit the curves of the human body.
4. The acrylic surface is highly resistant to various mechanical damage: chips, deformations and scratches.
5. Acrylic is able to retain its original shine for many years and does not turn yellow, as happens with enamel analogues. In addition, they practically do not slip, which makes their use safer for children and the elderly.
6. The surface of such baths is covered with a special antibacterial layer, which prevents the development of various diseases and fungal deposits.
7. The water draws quietly enough, which allows you to take a bath even at night, without fear of disturbing your family and neighbors.

Advice: if you want to install a bathtub model with a hydromassage function, then first think about where to best place the additional equipment.

Conclusion

If you decide to use Bas company products, acrylic bathtubs will be purchased at the most reasonable price. And the number of different additional functions will turn the ordinary hygienic bathing into a real spa treatment.

The high environmental friendliness and ergonomics of all models allows you to install and use these devices for convenient bathing of babies and small children. They are easy to fit into any interior, thanks to the variety of shapes and convenient installation method. The only thing you should not forget about is the mandatory grounding of such baths. Don't be lazy and risk your health by relying on luck.

Gallery

Instructions for acrylic bathtubs from Bas

Thank you for purchasing this bathtub. trademark"BAS".

• Preface

Baths "BAS" are modern technologies and original lines that provide comfort during water procedures.

This manual describes the bathtubs' functions, installation requirements, maintenance and operating methods.

Attention: In order for the bath to benefit you and work for a long time and reliably, a number of conditions must be met:

1) Consult your doctor to what extent taking a bath is beneficial for you.

2) Consider installing filters for water purification.

3) Do not turn on the hydromassage without filling the bath with water!

4) It is forbidden to seal the seams between the wall and the bathtub with rigid building materials (ceramic tile, curbs, mortar, etc.)

• Technical description

Standard equipment for a hydromassage bath:

1. Acrylic bathtub - 1 pc.

2. Metal frame - 1 pc.

3. Legs - 4-8 pcs. (depending on model)

4. Panel clamp - 2-4 pcs.

5. Self-tapping screws for fastening the acrylic panel - 5-12 pcs.

6. Additional equipment: acrylic panel (screen), drain-overflow device, back massage, aeromassage, etc. (at the buyer’s request)

Transporting bathtubs When transporting and installing a bathtub, care must be taken not to damage the piping systems and electrical equipment. DO NOT: carry the bathtub by the piping and electrical wiring. It is necessary to avoid mechanical damage to the bath body and screen, and also to exclude the effect of chemically active reagents on the surface of the product.

Instructions for preparing a site for installing bathtubs:

1. A plumber performing work on the removal of hot and cold pipes cold water, must take into account linear dimensions bathroom Otherwise, the pipe outlets may rest against the stiffeners, units and fittings of the bathtub. This means that the bathtub cannot be installed close to the walls.

2. The bathroom drain pipe should not rise above the floor by more than 10 cm. If this cannot be ensured, then a podium must be made.

3. The legs serve to level the bathtub, so under load-bearing structure bathtubs need to install additional stops.

4. Electrical wiring for the bathtub equipment must be made with a double-insulated cable with a cross-section of 2.5 mm2.

System protection should be based on differential (multiple) shutdown (1fn=30 mA). The power cable must comply with EEC regulations and standards

• Electrical system

The installation of the electrical system must be carried out by a professional electrician with an electrical safety clearance group of at least group 3. The power supply wiring for the lighting and hydro-air massage system of the bathtub must have a “Residual Disconnection Device” (RCD) with a rating of 30 mA.

• Attention:

Connect the electrical cable in the following order: blue wire - “zero” brown wire - “phase” yellow-green wire - “grounding” The power supply for the lighting and hydro-air massage system of the bathtub should be connected only through a separate RCD with a rating of 30 mA. The RCD must be located outside the bathroom. It is strictly prohibited to connect the power supply to the lighting or hydro-air massage system of the bathtub through a plug and socket.

Using the lighting system without water in the bath is strictly prohibited.

• Name V Hz kW
• Hydromassage 220/240 50 0.9-1.5
• Air massage 220/240 50 0.7-0.9

Power is indicated depending on the bath model.

• Equipment for hydro and aeromassage includes:

1. hydraulic pump

2. compressor for air massage

3. function activation buttons and hydromassage power control

4. hydromassage jets (back side)

5. piping system

• Optional equipment

aeromassage (the jets are at the bottom of the bath)

hand shower, cascade, mixer

backlight

back massage

headrest

pen

• Bathtub Installation Guide.

1. Before installing the screen, first mark the location of the centers of the screen mounting plates on the front side of the bath with a pencil or felt-tip pen.

2-5. Next, you need to screw 4 M 12 nuts onto the mounting legs, use two M 12 nuts to screw the mounting legs to the bathtub frame, and use the remaining two M 12 nuts and two M 12 washers to secure the screen mounting corner on the mounting leg so that it reaches the edge of the screen . Attach the screen to the bath and use a drill dia. Make 3.5 mm holes in the corners of the screen mounting (it is recommended to perform this operation after first removing the screen).

6-7. Mark on the top of the screen the points with the centers of the screen mounting plates already marked on the front side of the bathtub, placing them at a distance of 1.5-2 cm from the lower edge of the front side of the bathtub. In the marked areas of the screen, use a drill with a diameter of 3.5 mm to drill holes for self-tapping screws. Next, use the same drill to make holes in the mounting plates of the screen (it is recommended to perform this operation after first removing the screen).

8. Using the legs, adjust the bathtub to the height of the acrylic panel, taking into account zero level the upper plane of the bath.

9. Install the drain and overflow device on the bathtub, screw on the siphon (not included in the kit) and connect to drain pipe bathroom

10-11. Having aligned the screen with the bathtub embedded parts, it is necessary to screw self-tapping screws into the holes, and then put plugs on them.

12. After installing the bathtub, remove the protective film.

13. Install the bathtub wall bracket. A wall fixing is offered to enhance the rigidity of the bathtub.

• ATTENTION:

It is prohibited to seal the seams between the wall and the bathroom with hard building materials (ceramic tiles, curbs, mortar, etc.) If the above is not observed, warranty repairs will not be carried out

Instructions for using hydro-, aero-massage, back massage, water illumination (mechanical activation of functions).

• Buttons for turning on hydro-, aero-massage, water lighting. (on and off - by pressing your finger inward)
• Switch for hydromassage and back massage. (possible simultaneous operation functions)
• Power regulator for hydromassage and back massage. (turn the knob clockwise)

Electronic (touch) control of hydro-, aero-massage, chromotherapy functions. (1, 2 — air massage power control; 3 — on/off air massage function; 4 — on/off hydromassage function; 5 — on/off chromotherapy function)

• The hydromassage and chromotherapy functions are automatically turned off if there is no water in the bathroom. The air massage is turned off manually after the jets have been purged.

Bathroom care

When cleaning the bathtub, use a liquid cleaner that is harmless to acrylic and plastic surfaces (see cleaning product instructions). The manufacturer offers you a specialized cleaning agent “TIM-PROFI”, adapted to our products. Clean stains with a soft cloth.

Scratches or burn marks from cigarettes that appear on the surface can be removed by lightly sanding with sandpaper (No. 1000/2000) and water. You can restore the shine of the surface with a liquid polish.

• Cleaning hydraulic system baths

This type of cleaning is performed using hard water (more than 15 salt deposits per cubic meter water). It is recommended to clean the bathtub hydraulic system at least 2 times a year as follows:

1. Fill the bathtub hot water(40C).

2. Pour in liquid detergent at the rate of 2g per 1 liter of water and run the hydromassage for about 5 minutes.

3. After this, turn off the electric pump and drain the water from the bath.

4. Refill the bathtub cold water and turn on the hydromassage for 2 minutes.

5. Drain the water and wash the bathtub (see “Bathtub Care”).

The manufacturer offers you a specialized cleaning product for the hydraulic system, adapted to our products.

WARNING: Never use a metal brushes or tools, as well as solvents and detergents with abrasive additives. Also avoid contact of ammonia or chlorine with brass and chrome parts of the bathtub.

• How to use hot tubs

It is forbidden to turn on hot tub with closed hydromassage jets and the water level is 5-6 cm below the jet opening. Never use the bathroom after taking alcohol or taking medications. Hydromassage in medicinal purposes can be carried out only on the advice of a doctor, who will select the appropriate duration of sessions and water temperature for you.

Taking a cold bath improves your health. A warm or slightly hot bath relieves tension. To relax muscles and relieve pain, take a bath (up to 40 C). The first hydromassage session, which should only be performed in warm water, should last no more than 10 minutes. The effect of water jet massage is directly proportional to the temperature of the water and the duration of the session. After taking a bath for too long, you may feel tired. And if you feel drowsy while taking a bath, turn off the hydromassage device for a while and cool the water.

For overweight people, hydromassage baths at water temperatures exceeding 38 C are contraindicated.

Before turning on the whirlpool system, make sure that the jet nozzles are not pointing upward.

• The simplest malfunctions, their possible reasons and solutions.

Occurring fault	Possible reason	Remedy
	There is no voltage in the network.	Call a specialist (electrician).
The hydraulic pump does not turn on.	Jumped off the hydromassage switch button plastic tube connecting the button and the pump.	Turn off the voltage. Attach layer. tube to the base of the button and turn the system back on.
	Jet nozzles are closed.	Turn counterclockwise to open the nozzles.
The hydraulic pump works, but no water flows from the jets.	The piping system is clogged.	See the "Bathroom Care" section.
Increased vibration in the operation of the hydraulic pump.	The engine mount is loose metal frame baths.	Turn off the voltage. Tighten the engine mounting bolts.

The manufacturer reserves the right to make changes to the design and configuration of bathtubs.

IN winter period The product is installed in a warm room after 6 hours from the moment the bath is delivered to the client

If a drain or overflow is installed in a manner not provided by the manufacturer, the bath will be void of warranty.

Active substances must not come into contact with the surface of the product. chemical substances that can damage the acrylic layer.

High (above 80C) thermal effects on the surface of the product are prohibited.

Installation (installation) of the bathtub (shower curtain) and the equipment included in the kit is carried out by the buyer with the involvement of specialists licensed to carry out this type of work. The installation warranty is provided by the installer with a note in the warranty card.

Installation of products must allow easy access to components and assemblies attachments, as well as to the connecting hoses for water and air supply.

Dear buyer! The manufacturer sets the warranty period for bathtubs to 10 years. Under this guarantee period includes all equipment, except for: drain-overflow device, hydromassage, air massage and any other additional equipment (see clause 7, page 1 of this manual), for which the warranty period is 2 years.

• Warranty service is not provided in the following cases:

– non-compliance with installation rules and operating conditions;

– loss of a receipt or warranty card;

– negligent storage or transportation by the owner, trade or transport organization;

– attempts at unqualified repairs;

– mechanical damage, traces of exposure to chemicals and abrasives due to improper care of the product;

– making corrections to the text of the warranty card;

– RCD (residual current device) is not installed, if present on the bathtub electrical equipment;

– use of the product for business activities.

The company does not assume responsibility for damage caused during transportation and delivery.

Warranty service does not include reimbursement of installation and disassembly costs.

• Video instructions for assembling the frame of an acrylic bathtub Bas

First of all, of course, a few words should be said about the company that produces acrylic bathtubs BAS. This company continues to surprise its consumers and partners, proving that bathtubs produced in Russia are no worse than their foreign counterparts.

The main products of this company are hydro and air massage acrylic bathtubs. Among the obvious positive aspects Acrylic bathtubs produced by BAS can be distinguished as follows:

• acrylic bathtubs from bas are manufactured using multilayer polymer plastic from the company senoplast - the combination of acrylic and ABS plastic gives strength and reliability to the bathtub;
• the same plastic from senoplast also has an antibacterial effect, which protects the bathtub from the proliferation of various bacteria
• Bathtubs from bas are manufactured using high-quality Italian equipment, so the products can compete with European products
• acrylic bathtubs reinforced steel frame which is well protected from water
• the products are manufactured in Russia and therefore their features take into account the design of Russian bathrooms

Buyers about BAS bathtubs

I wonder what the buyers themselves say about acrylic bathtubs; reviews are quite easy to find on the Internet. It turns out that the majority of customers were very satisfied, saying that the acrylic bathtub from bas works great. Buyers happily share their impressions that the bathtub of this company:

• does not scratch, despite the fact that the shower periodically falls into it
• The side is very thick and you can sit on it
• The bath retains heat perfectly, and therefore you can bathe in it for a long time, even if hot water in limited quantities
• The bathtub is equipped with excellent comfortable armrests
• takes up little space, all models are well thought out
• the only part that earned several negative reviews was the hydro and air massage system - they say that it does not last very long, and repairs are quite expensive

Another interesting point was that many buyers installed and assembled both an acrylic bathtub and a bathroom curtain on their own. Of course, not everyone can do this, but we can still assume that this indicates the quality of the product, since even an unprofessional assembler will do everything efficiently. However, the installation of a bas acrylic bathtub can be done by professionals - it all depends on the client’s capabilities. The instructions that come with the bathtub are quite clear and simple, so assembling the bas acrylic bathtub is not difficult.

Three great examples of BAS products: Atlanta, Florida and Laguna

One great example is the acrylic bathtub bas atlanta, which has certain advantages. So, the dimensions of this bathtub model are quite modest, it is suitable even for a small bathroom - 170 by 70 cm. However, the capacity is very good - 205 liters. Since bathtubs from BAS are mainly hydromassage, Atlanta is no exception - it is equipped with six nozzles - three on each side.

The required kit includes a standard set:

• metal frame that guarantees the strength of the bath
• legs under the bathtub, which allow you to adjust the height of the bathtub and ensure its stability
• a front panel that will cover the space under the bathroom and give the interior a complete look
• necessary device for draining and overflowing

In terms of design and space optimization, this is a very simple, medium-sized rectangular bathtub that is quite comfortable, but does not take up too much space or distract too much attention, so it will easily fit into almost any modern design.

Another example of an excellent bathtub is an acrylic bathtub - this is a corner asymmetrical bathtub. It is quite compact in itself - length 160 cm and width 88 cm, and at the same time it also has a beveled corner, so it will become ideal option For small room. Although her style is quite simple and elegant, if desired, you can highlight her - for example, create a visually separate space for her, using decorative elements, finishing with tiles of a different color or shade, additional shelves, etc. In addition to its ergonomic design, this bathtub also has interesting shelf for hygiene items, or even so that you can sit on it.

The equipment here is standard - the same as in Atlanta. The capacity is also 205 liters. But there are more hydromassage jets - there are eight of them.

The last one to consider, of course, is a model such as an acrylic bathtub bas lagoon, which is somewhat similar to the Florida model. However, Laguna is larger in size - 170 by 110 cm. The capacity is also much larger - 295 liters. And the number of hydromassage nozzles is the same - eight pieces. The equipment is standard.

This bathtub is suitable for a medium-sized room, due to the fact that although it is asymmetrical, it is still quite large and is unlikely to fit well in a small room. This model is also very conveniently equipped with a shelf for bathroom accessories and has ergonomic design. At the same time, it will most likely be one of the main elements in the design of the room, this is facilitated by its rather large size. Therefore, you can highlight it with directional colored lighting or other decorative options. Also, great idea will hang large mirror next to the bathroom, so that it expands the space, and the bath no longer seems something bulky.

In addition to the standard equipment, BAS offers its customers quite big choice additional options. These additional features can be divided into several groups:

1. Aero and hydromassage lotions: various types of massage - back, shiatsu, foot; aeromassage from 6 to 12 nozzles, hydro-aero-pipe massage.
2. Faucets: cascade mixer or even the whole set: spout, mixer, shower holder.
3. Backlight: various types lighting and chromotherapy.
4. Pleasant little things: headrest, armrests, cleaning products for the massage system or the bath itself, a pillow for the on and off buttons.

The BAS company provides its customers with really wide possibilities in choosing a model and a complete set of bathtubs, plus you can choose a design curtain.

Even the most stylish interior the bathroom will look ridiculous if you do not close the space under the plumbing fixture. You can decorate it different methods, but installing a screen is considered the best and most reliable. With it you can not only improve the room, but also create a comfortable work area hiding from prying eyes. Under such panels in the free space you can place household chemicals, small buckets and other things.

What are they?

Modern manufacturers offer a wide range of products to suit every taste.

There are different types of protective panels:

• deaf;
• with sliding doors;
• with accordion doors;
• with hinged doors;
• with shelves.
• with fabric curtain.

Which option to choose is up to each person to decide for himself. If you want to save free space, you should choose the option with accordion doors that will best fit into small spaces. For a comfortable location household chemicals under the bathtub it is better to choose a product with shelves. But blank panels are distinguished by their aesthetics. They are very simply attached to the frame, but their installation limits access to plumbing connections, since not all models can be easily and quickly removed.

Find a full overview of all screens in our special article.

The most popular options among users of acrylic bathtubs are:

1. front panel.
2. continuous screen made of ceramic tiles;
3. sliding

In our article we will take a closer look at installing an acrylic panel, because consumers most often prefer this method of decorating the space under the bathroom.

Detailed information about tile screen installation And sliding panels see relevant articles

Photo

The photo below shows various interesting options decorating the space under the bathroom.

How to choose the right size?

Any bath panel is selected for a specific size. It is very important to check whether it fits your plumbing model. The length of acrylic panels varies from 120 to 180 cm for standard hot tubs. And the height is 55-60 cm, but it can change if there are legs.

Most often, acrylic panels come complete with plumbing fixtures and have the same tone as the bathroom, which allows them to look organic general design. They are made of plastic coated with an acrylic layer.

The advantages of panels purchased complete with a bathtub include the fact that they fit as tightly as possible to the sides of the bathtub, eliminating unsightly gaps. Experts do not recommend purchasing such screens separately, since they do not always fit exactly in size.

If the screen is purchased separately from the bathroom, then in order not to make a mistake with the choice of size, you should carefully measure the plumbing from all sides.

Front panel installation

We have made our choice and now we can begin installation.

It should be immediately noted that standard screens are sold complete with all fasteners, frames and fittings. They also come with detailed step-by-step installation instructions.

For installation protective screen The following tools and materials will be required:

• roulette;
• marker or pencil;
• building level;
• screwdriver;
• wrench;
• silicone sealant.

How to assemble and secure the screen? Let's consider step by step instructions for installation for bathtubs of the Triton brand:

STEP 1. Adjusting the height of the bath. In order to avoid a wide gap near the floor, you need to match the height of the font and the front panel. We measure it with a tape measure and, using a wrench, tighten the legs.

It is very important to check the level after all manipulations. Don't forget to do this.

STEP 2. Marking. Now you need to find plastic plugs on the frame or legs to which the screen will be attached, and mark on it with a marker the places for screwing in the screws, according to the location of the plugs.

STEP 3. Fastening. We apply the screen and, using a screwdriver, fasten it to the frame with self-tapping screws. Then we install special plugs on the screws.

It is best to seal the joint between the screen and the tile with silicone sealant to prevent splashes from getting in and causing mold to grow.

How to install on corner models?

For corner bathtubs, mounting is most often provided not with self-tapping screws, but with special magnets and metal plates. Such magnets are initially attached to the legs of the font.

STEP 1. Height adjustment. Just as in the case of the rectangular model, we adjust the height of the legs based on the screen parameters.

STEP 2. How to attach the plates? On back side panels in places where the magnets will rest, glue the metal plates from the kit onto Double-sided tape or silicone sealant. While drying, you can secure them with regular tape.

STEP 3. Installation. We apply the front panel and check that the magnets grab the metal plates.

This installation option is convenient because the question: how to remove the screen and then put it back on again does not arise. Everything is extremely simple, you need to apply a little force by pulling the panel towards you, and you can just as easily return it to its place. The previous method is no different from this simplicity; there you will first need to unscrew the screws.

Conclusion

In conclusion, it is worth noting that installing a screen on an acrylic bathtub has many advantages. With it you will transform the interior of the room and create extra bed for storing household chemicals. To make your bathroom more functional and aesthetically pleasing, you should take a responsible approach to choosing a screen and carefully consider how best to attach it.

Purity of soul and peace of mind - this is what any self-respecting person needs! For most of us, these very concepts are the goal to which we ourselves strive, without noticing it or realizing it. As popular wisdom says, a healthy mind in a healthy body! The same can be said about purity: a clean body means a clean soul. Now, in order to achieve purity of the soul, first of all we need to achieve the purity of our body. And this is easy to achieve: just come after work and plunge into hot bath. IN this moment- there is nothing simpler, but such pleasure! In addition, every person sometimes needs the very least - to be with himself, relax and think about the past day and future plans, and so that no one bothers him. And where do you think all this can be achieved? Exactly! In bathroom! To achieve the above, the equipment and decoration of this very room plays a significant role.

IN modern conditions The so-called acrylic bathtubs have received significant variety. From this material you can get baths of any color and shape, it all depends solely on your imagination.

You can choose a bathtub for every taste, completely matching your desires. It is these requirements that the bas acrylic bathtubs that we offer you meet.

bas baths have their advantages, namely:

• the material takes a long time to cool;
• bathtubs of this type do not lose color or deteriorate and will serve for a long time;
• high guaranteed service life (from two to ten years);
• in case of damage, bathtubs can be easily restored using grout intended for this purpose;
• they are easy to install, operate and maintain;
• confirmed by the appropriate certificate.

To achieve all the listed requirements, we advise you to use bathtubs and curtains for them from the BAS brand (Bath Acryl Systems). Acrylic and massage bathtubs with curtains will please any whimsical client.

bas acrylic bathtubs are manufactured in several stages:

1. 1) the acrylic sheet is heated to a temperature of 130-160°C;
2. 2) a trough of the desired shape is formed;
3. 3) this trough is cooled;
4. 4) the resulting form is fixed in the right place;
5. 5) the outer edge of the bath is covered epoxy resin with fiberglass in several layers (this gives rigidity and strength).

But, if the shape of the bathtub is too complex, then its strength will be much lower, because The plasticity of acrylic has certain limits. Therefore, you need to make a choice between beauty and reliability. If you use high-quality sanitary acrylic when making a bathtub, then your bathtub will not be subject to corrosion, chemical and other types of influences. The bas acrylic bathtub can be equipped with hydromassage jets. A variety of settings according to your order can provide a variety of massage modes (from pulsating to oriental). If you have regular bath made of acrylic, then after a while you can build a hydromassage system into it, for which you just need to buy this system and call the appropriate specialist.

Let's consider the issue of maintaining our baths. Unlike cast iron or steel bath, caring for acrylic is even easier. The only drawback is that the bathtub is not suitable for soaking laundry. Plumbing acrylic is not a porous material, so it is not susceptible to contamination. For maintenance, simply wipe the bath with a soft sponge and a cleaning agent (you can use liquid soap, etc. detergents). But the use of abrasive substances and solvents is strictly prohibited. Hot tubs must be disinfected and cleaned annually (but not more often) to remove deposits. water stone. This is done using a disinfectant or vinegar (1.5 l) added to a bathtub filled with water. Then we turn it on for 10 minutes, drain it, fill the bath, and turn it on again for 1-2 minutes. Then we rinse the bathtub from the shower.

No matter how durable the material is, unfortunately, it can also crack and be scratched. But scratches and cracks are easily eliminated. To do this, you need to sand the damaged area with sandpaper. The procedure should be carried out by constantly pouring water. When purchasing bathtubs you can purchase special means, adapted for removing cracks, as well as all kinds of polishing. At proper care The service life of your bathtub will reach up to 20 years.

The most common bathtubs are suitable for any bathroom - rectangular shape. The choice of sizes is quite wide, from very small to huge. To save space in your bathroom, you can use corner baths, which can be installed in small rooms. An example is the Alegra bathtub, which has an asymmetrical shape. In addition, there are baths that have common standard sizes, such as Imperial or Iris. But, if the size of your room allows you to install baths bigger size, then you can install a Laguna bath. The offered choice of shapes and sizes will allow you to enjoy the bathing procedure to the fullest!

A shower stall can serve as a replacement for a hydromassage bathtub or as an addition to it. It is with its help that you can save space. The shower cabin is well suited for those people who do not particularly prefer a bath. In addition to its main function, the shower cabin has a number of additional features, such as a telephone, radio, etc. In addition, you can install Turkish bath and/or hydromassage installation.