After installing a door on a balcony, there is always a desire to make the threshold efficiently and practically. And if we're talking about about performance criteria quality option threshold, then it is worth considering a number of tips that will allow you to fully answer the question of how to make a threshold for a balcony yourself - various options. After all, the importance of this design will allow you to create the required type of decor and select the material to complete this element.

Significant advantages of balcony thresholds

The structural element has a number of advantages that allow you to more fully exploit the balcony space. It is worth noting that Constructive decisions and the correctly selected material will provide a number of advantages, namely:

• The ability to limit the penetration of moisture and dampness.
• With option open balconies. Indeed, during precipitation, some of the water may remain on the surface of the balcony and penetrate into the room. A correctly executed threshold will provide a barrier and protection internal space premises.
• Using a threshold allows you to remove cold bridges and limit freezing of the surface if the balcony is not insulated. It also provides additional support for placing the door and a certain fixation process.
• The practicality of the location of the threshold will allow you to visually divide the space of the room and the balcony, allowing you to move from each room more practically.

An important process is that its reliability in operation depends on the choice of fastening method.

Materials for making thresholds

Correctly selected material for making a threshold for a balcony. This will prevent its rapid abrasion and will give a reason to perform all the functions assigned to this element. And here it is worth carefully dividing your choice decorative solution or the creation of a significant obstacle, in the form of a threshold in doorway balcony

The main materials for the threshold will be:

• Brickwork;
• Cement-sand mortar;
• Based on laminated boards;
• Made from .

Each of the proposed options has its own design features. However, not for each of them premises will suit one or another version of the threshold, since subsequently the entire room will be finished and a more relevant transformation of the space will be created. Therefore, it is worth paying more attention to the choice of material, taking into account the specifics and functionality of the room where this element will be located.

Using brick as a base

In the case where there is a significant difference in heights in the room and the balcony space, additional support for the mounted door frame. And the choice is in favor brickwork will be very visible. After all, the implementation of this kind of design will allow you to firmly place the door and create the necessary developments for the subsequent decoration of the doorway. Execution of this type construction work will require the following operations, taking into account which a strong and durable threshold based on brickwork will be formed.

Namely:

• The importance of performing the threshold will be detailed measurements, which will allow you to further position the door frame and correctly remove the significant difference in the two rooms.
• Next, you should practically and efficiently clean the existing area where the brick is located, removing dried mortar or other dirt. After which a primer is applied and sprayed to ensure uniform adhesion of the cement-sand mortar and the existing base.
• When making brickwork, it is worth using a cement-sand mortar, which will allow you to combine each of the placed bricks and create a reliable bond with the existing concrete base.
• It is worth noting that the masonry should be made of brick, which is not subject to excessive moisture absorption and air accumulation inside itself, and the existing holes will allow you to create a solution for heat exchange during the subsequent operation of the threshold.
• After laying the brick and evenly distributing the mortar, you should also worry about finishing the surface. And here you can resort to using tiles or decorative adhesive. Due to this, the threshold will acquire an unusually attractive and practical appearance.

It will also be important to complete all necessary tool and building materials, through which it will be possible to begin the required construction work.

• Mixer, stirring the adhesive base or cement-sand mortar;
• Perforated corner, if necessary, creating an ideal threshold contour;
• Adhesive mortar, or cement-sand mixture;
• Spatula, for uniform distribution of the solution or adhesive composition;
• Hammer for even placement of bricks;
• Plaster or, for the final finishing of the threshold;
• Level, creation of a flat surface and control of the threshold being laid;
• Tape measure, displaying the dimensions and required threshold parameters.

In this case, it will be possible to qualitatively complete the threshold on the balcony without worrying about a lack of tools or inappropriate quality control of the resulting solution. The created threshold will be able to perfectly perform its functions and change the options for using the balcony room.

It is worth noting that when performing balcony threshold made of brick on the outside, it is necessary to take care of additional sealing. This will be necessary in the case of open balconies and the possibility of moisture ingress.

Preparatory stage of arrangement

It is worth noting that it is important to prepare the base of the future threshold, which is experiencing a decent load, and simply blowing foam into the voids is not the best option.

1. In the case of a minimum height difference in two rooms, the threshold in front of the balcony can be made by first completing the appropriate measurement procedures and preparing the base. And it will also require the creation of formwork and minimal reinforcement.
2. First of all, it is worth processing and cleaning the surface of the solution in detail, and then drilling around the perimeter required amount reinforcement and lay the masonry mesh. Due to this, the strong and reliable main structure will be stripped and the threshold structure will be unified with the existing floor base.
3. After this, you will need to assemble a minimum formwork made of wood, for the subsequent solution of cement-sand mortar. And here it is worth understanding that it is important to assemble the box efficiently, ensuring that the mixture does not flow out of it. For this purpose, separate areas adjacent to uneven walls can be sealed with sealants around the perimeter of the formwork.
4. After which the cement-sand mixture is mixed, it is important to prepare a solution that is not very liquid.
5. The result will be durable surface, for the perfect appearance of the threshold. After drying, it will be possible to finish the threshold with tiles or laminate.

Tiling the threshold

Tile is perhaps the best and unpretentious option for arranging a threshold for a balcony or loggia.

In the process of tiling the threshold, it is important to use a level and perfectly identify the surface adjacent to each of the elements. installed door. This will not only create flat surface, but also provide an unusually realistic decor option. In this case, to secure the tiles, you should use a special glue solution, which is evenly applied to the surface of each element.

Threshold made of plastic and laminate

In the absence of elevation differences optimal solution the threshold can be made of laminate. The solution will also make it possible to constructively highlight the doorway to the balcony and provide a visual combination of the material and the floor.

Using a PVC window sill

Today there is a large number of ready-made solutions based on plastic and PVC window sills. Allowing, taking into account the width of the doorway, the installation of this structure on a concrete base.

To do this, you will need to securely attach it to the tile adhesive solution, provided that the base is level, this will be more reliable than polyurethane foam.

After installing a new balcony door, the need arises to make a threshold. At first you might think that there is nothing complicated about this, but when you start to figure it out, you will realize that there are a lot of nuances. Accordingly, today we will talk about how to make a threshold on the balcony with your own hands. It will be difficult for an inexperienced person at first. We strongly recommend that you strictly follow the advice of more experienced builders, and then everything will work out, the main thing is to do everything according to the instructions.

DIY threshold to the balcony

The threshold to the balcony has two functions. The first is aesthetic, that is, a door with a beautiful threshold looks much better. The second function is insulating. Thanks to it, less cold penetrates into the house in winter.

The threshold to the balcony can be made from:

• wood;
• plastic;
• bricks (it is better to use silicate);
• properly prepared cement-sand mortar.

Dismantling

Working on the threshold

Removing a threshold is much easier than building a new one, but there are some nuances here too. Wooden crafts dismantling it is not at all difficult, but if it was made of brick, then everything is much more complicated. You need to do everything as carefully as possible, since you will have to use a hammer and chisel. If these tools don’t help, then it’s time to use the hammer drill.

IMPORTANT!!! In places near the wall, it is better to work with a grinder with an attachment for working with stone. If the disk is missing in some places, then we try to work with the previously mentioned hammer and chisel. The work is quite dusty, so we recommend purchasing a respirator and construction glasses.

Brick threshold

High threshold in the doorway of the balcony block

Most often, a brick threshold on a balcony is used in cases where the level of the balcony block is much higher than the floor level. Thanks to the brick, namely its thickness, this difference can be easily and quickly eliminated, thereby saving money on sand-cement mortar. The cladding is made of either laminate or ceramic tiles. Make sure that the brick is not too high, otherwise the door will not open.

Related article: Japanese curtains to the kitchen: design features

To build a brick threshold we need:

1. Putty knife
2. Roulette
3. Hammer
4. Gypsum mixture
5. Metal lighthouse
6. Perforated corner
7. Drill
8. Drill attachment “mixer”
9. Sand
10. Cement
11. Sand-lime brick

To begin with, it is advisable to tidy up, ideally wash the floor. After cleaning, we begin to prime everything. The primer helps improve adhesion. We advise you to choose a soil mixture that, after drying, leaves a slight roughness.

Do-it-yourself high threshold in the doorway

Next, mix sand and cement in the proportion of 1 part cement + 3 parts sand. To make the solution set faster, add isogypsum or satengypsum to the resulting mixture. The mixer attachment in tandem with the drill will thoroughly mix all the ingredients.

Take a spatula and evenly apply the mixture to the primed area and the edges of the bricks. This way the bricks will adhere not only to the floor, but also to each other.

Placed on the corner of the bricks perforated corner, and on the door there is a beacon. They are fixed with the same mortar as bricks; there should be no void anywhere.

Plastic threshold

Threshold balcony door

Plastic threshold on the balcony it looks excellent, but has a relatively short service life. Installing a plastic threshold takes no more than one day. All the work consists of installing parts on the profile using self-tapping screws. We recommend using polyurethane foam for the layer.

The most the best material for the manufacture of plastic thresholds are considered to be well known and available in almost every hardware store PVC window sills. They are strong enough to support a person's weight. With a beautiful threshold, the door looks completely different.

Wooden threshold on the balcony

DIY threshold to the balcony

The most big advantage wooden threshold is that it practically does not let through cold air. If it is additionally insulated with high-quality mineral wool, the effect will be even better.

To begin with, let's take wooden blocks and assemble the sheathing from them. It will have to be firmly screwed to the floor. For sheathing, use a board made of pressed wood chips. It can easily withstand heavy loads without deformation.

Beautiful threshold for the balcony with your own hands. We offer for consideration 4 options for carrying out the work, and each of them was able to prove that all are reliable, and you only have to choose one, the one that is best suited for your design. The surrounding interior is also worth considering, and if you have wooden trim, then making a threshold to the balcony from a window sill with your own hands will be at least awkward.

Read our article for details.

This option is used quite often, since in Soviet times simple solutions it wasn’t - if everyone used bricks, then it was considered correct. This is exactly what all the developers thought, and therefore they made the threshold for the balcony from this very material.

But also on this moment This solution is used most often, since it is optimal in such cases:

Note, that the use of this option for performing the work is possible if the front is at least a few cm larger than the height of the brick. Afterwards you will need to level the surface, and then do the finishing, and if suddenly the height is not enough, then the threshold may become even higher, than a door frame.

To complete the work you will need the following:

1. Brick. Most often, a few pieces are enough, and most people recommend using just sand-lime bricks, but according to experts, other varieties building material no worse. The strength of any of the types is sufficient, and they will be able to withstand a load much greater than the weight of a person.
2. Masonry mortar. Although you can do everything the old fashioned way and buy cement, find sand and mix the solution with your own hands, it will be much easier to buy a bag of professional and already ready-made composition, which will only need to be diluted with water in the required proportion and use it for your own purposes. The price for a bag that weighs 25 kg will be approximately 300 rubles, and this will be quite enough.
3. Perforated corner. You will need a piece to level the corner, but such corners are sold only in pieces, 250-300 cm in size, so you will need to buy a whole one. The cost of the product is not that high, so you won’t lose much.
4. Primer. Using this solution, you can pre-treat the surface if it is loose. Primer can also be applied to the finished surface after the masonry mortar has dried, and this is required to strengthen the surface, since thanks to this treatment, sand will no longer be taken from it, and absorbency will decrease significantly.

Note, that to quickly dry the solution, you can add about 10 to 15% gypsum to it, but more is not required. If you add more, you will have to work very quickly, and there is a huge chance that it will set faster than you can work it out.

Yes, masonry mortar really helps make life easier. You also cannot do without the following tools:

• To make the solution you will need a mixer attachment and a mixing container, but in extreme cases you can do everything without using electrical appliance, and then use a strong stick, which you need to vigorously stir the mixture.
• The mortar should be applied to the brick with a mason's trowel, or with a spatula, since there is not much work, you can use any tool. It will be more convenient to use a spatula to level the surfaces at the very end, and this is important.
• Surely in some places you will have to put pieces of brick, and it will be easier to beat it off right size using a mason's hammer. It is not necessary to make it perfect, the main thing is that there are no columns of dust, and this often occurs when cutting stone with an electric grinder.

Now let's look at the instructions for making a threshold on a balcony with your own hands:

1. First, clean the surface of dust and debris, and if there are sagging from the solution, protrusions and protruding areas, then you should remove them. Try to prepare the surface perfectly, and the smoother it is, the easier the work will be. If there are sagging foam, you should carefully and evenly cut them off using a sharp construction knife.
2. After that, start making masonry mortar, dilute ready mixture water in the required proportion, as indicated on the package. All the work is simple, and the main thing is to mix everything well so that there are no unmixed or uneven areas left in the mass.
3. Now we apply the mortar under the base of the brick, and then spread it on the end side so that the seams are filled with cement. The laying should be done in one layer, and therefore the work will not be difficult - lay an even layer and lightly press all the elements.
4. If necessary, beat the brick to the required size, here we look at the situation. The surface should be covered with a layer of mortar, place a piece of metal corner on the corner, and level everything with a spatula to make best result. When the surface is dry, you can wet it a little and level it with a foam float, and the surface will become perfectly smooth.

Method No. 2 - filling the sill with solution

Constructions of this type differ in many ways from the first method. This is the case when you need to raise the level, but the height is less than the size of the brick. Perfect option to raise the plane, the simplest and fastest.

To work you will need:

• Sand-cement mixture, grade M-150, since it is most convenient for pouring screed, and the price is affordable - about 150 rubles for a bag of mixture weighing 50 kg.
• To make a screed, you need a board of the required height with a thickness of 2.5 cm, and its length should be slightly greater than the width of the opening into which the threshold will be poured.

From the tools you will need a container to mix the solution, as well as a grater for leveling at the end and a spatula for applying the mixture.

In more detail, the technology for creating a beautiful threshold on a balcony with your own hands is as follows:

We suggest considering the third method.

Method No. 3 – threshold made from a plastic window sill

This option is good because it is simple and cheap. But there is one nuance here - if the window sill for making the threshold is of poor quality, then soon it will break under someone’s weight, and all the work will need to be done anew. If you immediately buy good quality material, such problems will not arise. A plastic threshold on the balcony will look very beautiful and neat.

To work you will need the following:

• Plastic window sill with the width and length parameters you need.
• Polyurethane foam for gluing elements.
• Sealant for filling voids at joints.
• Blocks for support (if required).
• End plates for side face.

Do-it-yourself plastic threshold for a balcony:

At this point the work can be considered completed. There are often tips to screw the threshold onto self-tapping screws, but this is stupid, since there is nowhere to screw it in, and concrete is far from suitable for this. best base. In addition, the strength of the fastening without self-tapping screws will not be in doubt.

Method No. 4 - making a threshold from wood

This option is excellent if it matches the overall situation, i.e. you have wooden trim or the room is made in rustic style and other similar areas.

For work you will need:

• Boards or other wood elements to create a threshold.
• Several bars to make a base for the threshold.

We suggest you figure out how to install a wooden threshold on a balcony:

Yes, wood needs additional protection from moisture and abrasion, so the surface should be treated and then paint/varnish applied on top, what exactly is at your discretion. The compositions must be wear-resistant, so the threshold will have to be painted at least 2 times.

Finishing methods

Of the options you have considered, two give an excellent final result, and two remain the base on which the coating will still need to be laid. Let's figure out how to finish the threshold on the balcony. The first option would be to use ceramic tiles, since the material is highly durable and wear-resistant, which means it is ideal for achieving the goal.

The work is carried out as follows:

1. Since the plane is already prepared and primed, you can immediately take measurements to calculate how the tiles will be positioned. It must lie symmetrically, and then the pattern will be beautiful and even.
2. Cut the ceramics using an electric grinder with concrete discs or a tile cutter. Take measurements carefully so that the elements lie evenly.
3. The material must be laid using a special adhesive composition, which is applied with a notched trowel. To ensure that the seams are the same size, crosses should be inserted into them. Check the level of the plane using building level, since everything should lie perfectly flat.
4. You can also tile the walls under the threshold, here only you decide what will happen and how. For strength, can be inserted into gusset a special element, but this is not necessary if the joints are already smooth. If you do everything carefully, the threshold will turn out perfect.

Note, that for the threshold you should choose a tile that has a structured surface, since it is very easy to slip on smooth ceramics.

After the adhesive has hardened, remove the excess and fill the seams with fugue, which will make the threshold look much better and help protect the base from water. You can lay out the threshold from pieces of slabs, which also looks interesting.

Another finishing option is a threshold made of, and this method is quite simple to manufacture, which is why it has become very popular:

1. Take measurements, cut out the required size piece of laminate, usually one strip is enough, especially since they come in different widths and you can always choose what suits you perfectly. You can cut the material with a hacksaw for wood, which has fine teeth, or with a hacksaw for metal, but if you have it in stock electric jigsaw, the process will become much easier.
2. The finished piece should be tried on, and if everything fits, then apply a layer on the back side liquid nails, and then press the element more tightly to the surface. At correct use everything will work out.
3. At the end you should attach a corner to a step, which is sold in a hardware store, and you only need to take a piece of the required width.

You can also install a corner on the threshold, which has an anti-slip strip. Another interesting solution– finishing the threshold on the balcony using. This material is distinguished by the fact that it is inexpensive, and buying a piece of material from waste will cost you a penny.

Do-it-yourself work on finishing the threshold on the balcony is carried out as follows:

1. Place a piece of material on the surface, and then mark the lines along which the cut will be made, and try to cut the material as carefully as possible so that the joints do not turn out to be defective.
2. After this, the base must be lubricated with an adhesive composition designed specifically for linoleum, and the material must be pressed in place, leveled and pressed better for good adhesion to the surface, and also give Special attention joints
3. At the very end you should attach metal corner, which will strengthen the projection and prevent damage to the material in this mass.

Conclusion

The threshold should not only be safe and reliable, but also beautiful, so you should definitely use one of the methods described above to create the structure. The video in the article will give you the opportunity to understand all the nuances even better, and if something is not clear, you can always ask questions in the form under the article

As a rule, installing a threshold on a balcony door is the final stage of installation and finishing of the balcony block (door). In the vast majority of cases, professional installers offer the manufacture of thresholds from PVC material– a window sill board that is mounted on an existing threshold.

Window sill boards have both their advantages and disadvantages. The first is aesthetics. appearance balcony block, especially if the PVC profile has a color other than white, in such cases the threshold from the PVC window sill panel looks like a single whole with everything balcony block. This threshold is easy to care for, it does not absorb moisture, and is easy to clean. The disadvantages include: fragility, rapid wear, especially if the balcony is used every day, an almost inevitable creaking that develops as such a threshold is used, severe freezing, since plastic is a poor heat insulator...

Why do you need a threshold?

Arranging a threshold in front of a balcony door has several purposes. Firstly, it allows you to smooth out the difference in height between the floor and the balcony profile, that is, to make the process of accessing the balcony more convenient. Secondly, it seals the foaming area bottom clearance between the wall doorway and the door frame, this simultaneously eliminates a possible “cold bridge” that can form at the foaming site, and enhances waterproofing, since the foam can become saturated with water during operation and moisture can enter the apartment, under the floor covering.

These and other reasons sometimes make it necessary to install thresholds in front of the balcony door from other materials.

They may be:

• brick;
• cement mortar;
• metallic profile covered with moisture-resistant plasterboard;
• wooden block with a chipboard(OSB), or made of boards.

The design of each of these types of thresholds has its own characteristics, which we will describe below.

Flood threshold

The easiest thing to install is a threshold filled with cement-sand mortar. To arrange it, it is necessary to clear the space in front of the balcony door from the floor covering, if any, remove the laminate or parquet boards so that the space between the slopes and from the level of the wall to the door frame can be filled with mortar. The base on which the threshold will be built should be cleared of construction dust, prime twice with acrylic or silicate primer, which will completely bind the remaining dust and in the future will not allow the filled threshold to peel off from the base.

After the primer has dried, it will be necessary to arrange the formwork. In this case, one board, 2.54 cm thick and the appropriate width, screwed or pressed with heavy objects flush with the wall in which the balcony door is installed, will be sufficient. The solution is prepared from a mixture construction sand and cement grade 200-400. The proportion is standard: 1 part cement / 3 parts sand. To increase the speed of setting and give the threshold additional moisture-repellent properties, you can add liquid glass to the solution.

The threshold can be made of any height, but if it is high enough, you can use expanded clay gravel or broken red brick as a filler, which is laid in one layer in the resulting niche and filled with mortar on top.

After the solution has set, it is allowed to gain strength, that is, the use of such a threshold should begin no earlier than 5-7 days after pouring. When the solution has completely set, the outer formwork is removed, and the threshold itself can be finished with laminate or linoleum, or lined ceramic tiles or decorative stone.

If the door is wide, more than 80 cm, or the balcony door design is sliding ( french doors), then the threshold should be filled in two stages.

First, pour half the thickness of the mixture, then lay a masonry mesh (metal) on it, tying the individual sheets together with steel wire, and then pour the threshold to the required height.

Brick threshold

In order to save cement, especially when there is a difference between the floor and the lower edge balcony frame big enough, you can use a brick (it doesn’t matter which one). The preparation of the base is carried out in the same way as for the flood threshold. No formwork is required, but when working, you may need a “grinder” with a cutting wheel for stone to adjust the bricks to size.

The laying is carried out using cement mortar prepared in the same proportions as for pouring. After the solution has set, you can begin to use such a threshold within a day. The finishing of the brick threshold is also done depending on the design concept of the room.

Threshold made of metal profile

In some cases, when it comes to arranging a door threshold of a complex (not rectilinear) shape, it is necessary to use a metal profile used for installing plasterboard and waterproof plasterboard with a thickness of at least 10 mm. Preparation of the base, with the exception of cleaning it from excess construction waste and no dust required.

According to the pattern, or markings on the floor, a metal profile is mounted to the base, screwed to concrete base screws into the dowel or anchors, then set vertical racks the required height, fastened to the profile using fastening units and metal screws, and then an upper horizontal contour, symmetrical to the lower one. It should be taken into account that the threshold will be under constant load, therefore the number of fasteners and the frequency of their location when arranging the threshold should be increased by at least 3 times, compared with the recommended frequency of their use when facing plasterboard walls or ceiling.

For additional thermal insulation, the space between the concrete base and the upper plasterboard panel of the threshold is filled with mineral wool or filled with expanded clay gravel. If the threshold being installed has curved lines, the facing of the end surfaces should be made of ordinary (non-moisture-resistant) plasterboard 5 mm thick, previously soaked in water, to give it flexibility. After installation, the end part of the threshold should be puttied with oil-adhesive putty to impart water-repellent properties.

Wooden threshold

The installation of a wooden threshold is also similar to the installation of a plasterboard threshold. To attach wooden blocks to a concrete base, holes are drilled in them along the diameter of the anchors, 100-150 mm long - depending on the thickness of the block, the bars are laid out on the base and with a nail or a thin punch, through drilled holes, the locations for drilling the base are outlined. After this, the block is removed.

Using a hammer drill or impact drill, holes of the required depth are drilled. After which the block is put back into place and the fastening units of the anchors are driven in and tightened. An option for fastening with self-tapping screws is possible, then polyethylene dowels are pre-inserted into the drilled holes.

Subsequent finishing

The installed threshold usually requires additional finishing. It can be laminate, parquet, ceramic tiles or just linoleum. It all depends on what kind of covering you have on the floor and whether you want the threshold to stand out as an element of the balcony block or, on the contrary, you want it to have the same texture as the floor.

All types of materials that are used to make thresholds can be finished with any of the materials listed above. Selecting an adhesive composition for covering wood with ceramic tiles may be somewhat difficult. But for this there are many polymer mastics and adhesives that provide excellent adhesion (gluing) to any of the known building materials.

Let's sum it up

Independently installing a threshold in front of the door leading to the balcony is a rather labor-intensive process that can take several hours. Therefore, you should start it when you have free time. In case of filling the threshold concrete mortar– it is advisable to perform it at a time when you do not plan to use the balcony for several days, so as not to step on the solution that has not yet hardened.

When the balcony renovation is almost complete, the windows and doors are installed, there remains one small final detail - installing the balcony threshold. There is an opinion that if the balcony is glazed, then it is not necessary to create a threshold to enter the balcony. But experienced builders advise that you must install a threshold on the balcony.

The main reasons for installing a threshold on a balcony

In fact, the threshold on the balcony door performs several tasks:

• The aesthetic appearance of the entrance to the balcony is improved. Using the threshold, a smooth transition is made from the floor of the main room to the exit to the balcony.
• Even if the balcony is glazed, the threshold on the balcony door serves as an additional obstacle to cold air entering the room. If the balcony is not glazed, then the threshold not only serves as heat-retaining protection, but also prevents moisture and dampness from entering the room.
• Safety and ease of movement. The chances of tripping over the high threshold of a balcony door are much greater in cases where there is no threshold installed on the balcony.

Making a threshold for a balcony with your own hands is quite a feasible task even for a novice and inexperienced builder. But here, as in any construction business, there are professional nuances, knowledge of which you cannot do in order to get a successful result of your homemade act.

Options for thresholds for balconies made of various materials

In order for the threshold to fit harmoniously into the interior of the room, it is necessary that the step in the opening of the balcony door matches the color floor covering rooms.

To finish the threshold, depending on the preferences and design of the room, the following materials are used:

How to make a threshold for a balcony yourself

The technology for manufacturing a balcony threshold includes several stages:

If the difference between floor levels is quite large, then instead of a cement-sand mixture, a brick base is used. When the threshold to the balcony is finally ready, it is recommended not to step on it for 24 hours.

For clarity and understanding of all the details of the process, there are a lot of videos on the Internet on how to make a threshold for a balcony with your own hands. A clear video instruction will explain to the novice craftsman all the stages of making a balcony threshold.