Painting a wooden gazebo. How to paint a wooden gazebo and how to ensure its durability. Water based varnish

Arranging personal plot, very often gazebos are built from wood. Lightweight design not only decorates the site, but also performs useful functions.

To ensure that the gazebo does not collapse from the effects of precipitation, exposure to sunlight and cutting wind, it is necessary to carry out protective covering wooden structures. The gazebo can be coated with water-repellent paint or applied to wooden parts varnish Careful care of the gazebo will extend its service life up to 10 years. In this case, the applied coating will act as an antiseptic.

Preparing wood before building a gazebo

Before construction begins, prepared timber requires special processing. Protective compounds against blue stains, mold and rot must be applied to parts of the structure in contact with wet soil. If desired, you can treat the timber with a fire retardant compound. After this, all wooden gazebo structures must be covered with a special primer composition. Applying a primer reduces the consumption of materials when applying the final coating and increases the percentage of adhesion of the coating composition to the surface.

How to cover the details of the gazebo?

The final finishing of the gazebo can be done using various coating compounds. If it is necessary to preserve the natural texture of wooden structures, texture compounds, primer and colorless varnish are used. This coating provides reliable protection for wooden parts and extends the life of the building to ten years. Continuous painting of the gazebo with a coating composition containing an antiseptic will provide protection for the structures for many years. At the same time, it is easy to choose different shades and colors. But applying paint will hide the wood texture.

A durable covering layer and preservation of the wood texture are ensured by painting with a weather-resistant yacht varnish.

Before applying it, you can tint the wood texture using special texture compounds or stain. The varnish already contains antiseptics.

It is allowed to varnish both the walls of the gazebo and the floors. When choosing paint, you usually buy the usual oil paint. It is quickly absorbed and has low attractive price. But oil paints persistent and irritating odor. Considering that they take a very long time to dry, and over time they become cloudy and faded, it is better to refrain from purchasing them. The most acceptable option is alkyd paints. They are bright and not exposed to moisture. The coating practically does not crack.

Finishing

To finish the gazebo with coloring compounds, you will need the following building materials and equipment:

Flute and round brushes;
sandpaper;
paint and varnish products;
mastic;
metal brush; hair bristle brush;
antiseptics;
primer.

Adverse Impact

For wood negative impact provide:

ultraviolet radiation;
mold;
sooty and other types of fungi;
wood-boring beetles and other species;
precipitation in the form of rain, snow, frost, dew.

The worst pests of wood are moisture and bugs. Their impact gives rise to wood defects, such as:

blue,
rot,
mold.

In the absence of protection, the tree changes its color to dull gray. Wooden structures can only be protected by applying special products.

The previously used method of treating wood with drying oil does not always help. Drying oil is not able to protect against rot. Once it gets into the pores of the wood, drying oil dries poorly and clogs the pores. Subsequently, it is unlikely that it will be possible to completely remove the drying oil layer.

The damage from bark beetles decreases as the bark is removed from the tree. But it does not give an absolute guarantee that the beetles did not get inside the tree trunk, and then into the lumber. If passages and gnaws on wood are detected, it should be treated with an insecticide.

Applying a fire retardant solution to structures increases fire resistance. The drug slows down combustion. The composition is applied by spraying with a spray gun or brush.

Painting the gazebo with paint

Treatment structural elements oil compositions different colors, or enamel and alkyd varnish, can increase the resistance of structures to atmospheric precipitation. And also significantly increase the service life of the structure as a whole. The quality of the coating is guaranteed to be high. A layer of enamel or
varnish coating, laid in an even layer, provides long-term protection to the elements of the gazebo. As a rule, these finishing materials The coefficient of protection against increased moisture and ultraviolet radiation is quite high.

If the gazebo was not painted immediately after construction, and was used for some time, then it appearance gets lost. From exposure to sunlight and precipitation, wooden parts turn black and become covered with mold and mildew. Dust eats deep into the pores of the wood. You should wash the gazebo with a brush. Mold and mildew are removed by treating the gazebo parts by special means, neutralizing fungus and mold, as well as bleaching materials. Cleaned boards must be carefully primed. After drying, treat again with an antiseptic solution 2-3 times. Then the final painting is done in 2 times.

Good afternoon.
For damp wood, and for wood in general, I recommend using Elkon-Bio silicone impregnation, tinted in desired color(without subsequent application of color) - both protective and decorative functions.
Briefly:
Impregnation for wood "ElconBio" (Elcon Bio). Silicone impregnation ElconBio designed for long-term protection of wooden structures from atmospheric influences, wood-boring insects, rot, blue stains and fungus. After drying, the impregnation forms an environmentally friendly coating that does not emit toxic fumes and retains the smell of wood. Silicone wood preservative is highly elastic, which prevents wood from cracking during natural drying. Wood impregnation is available in both tinted and colorless forms.
Long period of wood protection. Silicone impregnations completely repel moisture from wood in all weather conditions, preventing it from getting wet and therefore rotting. Silicone impregnations protect wood for at least 15 years indoors and at least 10 years in open atmospheric conditions.
Vapor permeability. Silicone impregnation is a composition that forms an ideal protective barrier on a wooden surface - it does not allow water to pass through, but due to its porous properties, it easily evaporates excess moisture, absorbed by wood. Thanks to this property, the tree retains the ability to “breathe”. The coating helps the wood remain fresh and healthy for a long time. Also, the vapor permeability of the coating allows you to apply silicone impregnations to still damp wood.
Elasticity. Silicone impregnation forms an elastic coating on the surface of the wood that can stretch with the wood as it expands with changes in temperature and humidity conditions. This ability of silicone materials prevents cracking of the coating and the formation of microcracks through which moisture can be absorbed into the wood; this, in turn, also has a beneficial effect on protecting the wood from getting wet and rotting.
Environmental friendliness. Silicone impregnations do not contain biocides, salts or organic solvents that are harmful to health; they are completely environmentally friendly and safe, taking into account the possibility of use in residential premises, including baths and saunas.
Deep absorption into wood. Due to the micro-size of silicone particles, silicone compounds are deeply absorbed into the wood, providing reliable protection of the tree not only from the outside, but also from the inside.
Drying time. Silicone compounds are very easy to use, as the coating dries in just 2 hours.
Possibility of application at sub-zero temperatures. Silicone compounds can be applied at air temperatures down to -20⁰С.

Up to 45% of summer extensions are built from lumber. To increase their shelf life by at least 10 years, and thus avoid extraordinary repairs, it is important to know how to paint the gazebo. Choice protective equipment often depends on their performance.

Classification of paints

Based on their composition, paints are divided into synthetic and natural. The latter are mainly dominated by vegetable oils. Unlike synthetics, they do not clog the pores of materials, so wood allows light and air to pass through well. If surfaces lack shine, it is better to use enamel compounds. Then the substance will not have to be applied in a double layer.

If you have lumber with a complex texture, it is more logical to choose emulsion paints for water based. They dry quickly and do not shed technical properties under the influence of excessive high temperatures. Water-based compositions are often called structural, as they are suitable for decorating any surface. With their help, wood can be protected not only from the baking sun or moisture, but also from cracking.

Water-based products also include silicone, latex and polyvinyl acetate coatings. The latter are more suitable for interior works. They are characterized by increased resistance to fading. But due to low water resistance, the surfaces have to be painted 3-4 times a year.

There are colors various types and types

Organic based coatings include:

Alkyd paints. Reliable and comparatively inexpensive option for painting gazebos made of rounded logs, boards and even forged metal.
When the air is heated to 35 °C, oil coatings emit harmful substances, so it is better to use them for outdoor work.
Enamel compositions contain up to 75% varnish, due to which painted surfaces often take on the appearance of an expensive gloss. They dry in 15–20 minutes and are good for finishing works inside buildings.

Silicate paints are effective only when the foundation is poorly waterproofed. Otherwise, they will not be able to protect the outer walls from rain. Glue-based coatings are in no way inferior to emulsion coatings in terms of environmental friendliness. However, compared to the latter, they tolerate moisture less well, so they are not suitable for painting damp wood.

Video “How to paint a gazebo yourself”

From this video you will learn how to paint it with your own hands. wooden gazebo:

Features of the color palette

Many people wonder what color is best to paint a gazebo in the country. Experts first consider the unique capabilities of the palette. For example, if the owners want to visually expand the space, White paint. This color automatically creates the effect of novelty. True, dirt on such surfaces can be seen from afar. All 136 shades of yellow, including laser lemon, in the best possible way imitate warm tones. Therefore, if you need to paint wood with noticeable cracks along the grain, this is the best that can be offered to consumers.

Cool shades of blue and green are ideal for painting roofs and exterior walls. In this case, the colors of the living decorations and the extension will complement each other. For facing works experts recommend black color. It makes the space deeper, and in combination with red and crimson shades it overcomes the feeling of gloom.

If you need to beautifully paint a children's gazebo, give preference to:

Orange color, which encourages children to be physically active. A juicy orange fuels a sense of confidence, thanks to which the child learns the material faster, and most importantly, is not afraid to explore the world through trial and error.
A yellow palette that promotes the development of intuition.
Calming shades of blue.
Red with the addition of yellow and green tones. IN pure form This color is invigorating, but causes aggression.
Violet, under the influence of which you can improve your imagination and even speed up your thinking process.

High quality wood floor painting window openings and stairs on the street is possible only after appropriate preparation of surfaces. First, you need to remove the old varnish from them, wash off the dust and dirt. A hair dryer will help with this. If paintwork is not deleted, no additional actions need to be taken. It is enough to sand the surface with sandpaper and dry it thoroughly.

Depending on the purpose of the gazebo - choose a color

On next stage you need to degrease the canvas, and if scratches and slopes are visible on it, use putty. For best result it would be useful to process wooden surface acrylic primer. It fills pores well, doubling the shelf life of products made from natural materials.

It is advisable to apply the paint evenly in three layers. Each of them takes at least 25 minutes to dry. Complete drying is possible only after 3 hours.

How to make the right choice

If wooden structure driven into the ground, it is important to treat the element in contact with the soil with a bitumen-based coating. This will increase its resistance to groundwater and will extend the shelf life of the product by 7–10 years. It is advisable to paint new boards before installing supports and arranging the roof. In this case, high-quality processing of the ends and more reliable protection from the sun, moisture and insect pests are possible.

When large quantity To remove imperfections, it is better to use covering coatings. They well mask the original color of products and the structural features of wood in general. For a better effect, surfaces are painted in 2–3 layers. If the owners try to keep original color worn boards, translucent glaze paints - choice No. 1. Their main advantage is resistance to ultraviolet radiation. The average shelf life of such a coating often exceeds 25 years, and final drying is possible in just 4 hours.

Water-based acrylic paints are ideal for new, well-dried lumber. If they are used to paint old wood, the additional moisture will have a detrimental effect on the already flimsy material.

Coloring Basics

Step-by-step painting of different products includes:

Wall painting, floor coverings and ceilings from the corner hard surfaces. If you do the same with individual pieces of furniture, the process should start from one end of the sofa or stool.
Applying alkyd or oil compositions first with vertical and then horizontal strokes. Acrylic coatings It is acceptable to apply only along the wood grain.
Preparation of the solution. Since the first layer is considered the base layer, the composition can be slightly diluted with water. After the third layer, the wooden surface should be sanded, and the metal surface should be polished.
Works on large areas using spray technology. In this case, movements should be made at the same distance from the base.

For more deep penetration protective compounds It is advisable to use antiseptics in wood. Thanks to their special composition they guarantee more reliable protection wooden products from moisture, mold and rot.

To avoid drips, it is better to start painting at a distance of 2 cm from the edge of the brush.

Many people know how to paint a gazebo at the dacha, but not everyone can choose exactly the material that is suitable. Today we will look at the question of what is the best way to paint a wooden gazebo.
After all, there are many materials and sometimes it is even difficult to choose. All the work here can be done entirely with your own hands, and then the price will be significantly lower.
The video in this article will clearly demonstrate the progress of the work and will provide instructions for choosing dyes.

Before you think about what color to paint the gazebo, you need to decide what paint to paint the gazebo with. After all, she is on the street and she is affected by external environment. This and high humidity, temperature changes and sunlight.
To paint a gazebo, you need to choose not just the right color, but also the correct type of dye:

Attention: To ensure that the paint does not lose its performance properties for a long time, you need to pay attention to its chemical composition.

Paint and varnish materials include varnishes, primers, and putties. High quality material gives a good paint finish. Therefore, it must contain a special binder, or film-forming substance, which is also called a film-forming agent.
When the applied material dries or evaporates, a hard film is formed that has high adhesion to the surface.

The durability of the decorative gazebo and its appearance will depend on what solvent is used in the paints. They can be organosoluble or water soluble.
If organic solvents, such as white spirit, are used to dilute paints, then you need to remember the following:

The film is dense and poorly permeable to water vapor. The exception is paints that contain plyolite resin.
The material is toxic and fire resistant.
But at the same time, they withstand atmospheric fluctuations, so they are suitable for outdoor work.

Water-soluble paints are environmentally friendly because the solvent is ordinary water. If an aqueous dispersion of various polymers is used for paints, then these are water-dispersion, water-based, emulsion, latex.
And mineral contains inorganic binders, such as cement, lime, and liquid glass.

Features of water-based paints

Gazebos can also be painted with these dyes. Let's take a closer look at their properties and after that it will be easier to determine what to paint the gazebo.

Water-dispersed	They have tiny suspended particles in water, these are film formers. These paints are quite acceptable materials for painting facades. They contain aqueous dispersions, synthetic polymers (copolymers) and silicone resins in the form of an emulsion. The advantage of water-dispersion paints is that they do not contain any toxins, because only water is required for their dilution. Products coated with such a coloring composition dry quickly.
Vinyl	IN vinyl paints the binder component will be a dispersion of polyvinyl acetate or vinyl acetate copolymers. It's relatively cheap painting material, but less water resistant than acrylic paints.
Acrylic	The mass in acrylic paints is bound by a dispersion of acrylate copolymers. During painting, excellent adhesion to the surface is obtained. Due to the fact that steam flows through the paint poorly, it is better to paint concrete and cement-fiber slabs with it. But it is better not to paint silicate materials or lime plaster with acrylic paints.
Silicone	Silicone paints use silicone resins as binding components. They do not allow moisture to reach the painted surface and protect themselves. If for some reason the painted surface becomes very hot, then silicone resin dispersions protect it from softening. In addition, they have a neutral electrical charge. This ability to repel water provides another important advantage: surfaces remain clean for a long time. Such a property as vapor permeability allows you to paint cement-lime, limestone, cement surfaces. They fit perfectly on concrete, brick, cement-fiber boards. Even old paint, if it does not peel off, you don’t have to remove it, the silicone paint will stick.

Any of these paints are either water-soluble or organic-soluble. Therefore, carefully look at the composition.
After all, before you paint the floor in the gazebo, you need to think about how long a certain coating will last.

Features of mineral paints

People often use mineral paints: lime, silicate, cement:

In lime paints, slaked lime is used as a binder. Carbonation of lime occurs in air, creating a durable coating of the painted surface.
They can be sold ready-made - pigment mixtures. They also come in the form of a paste, but you will have to add pigments to them, but in essence these paints are alkali-resistant, so there are very few shades.
Such paints are inexpensive, not durable enough, and quickly lose their quality. IN Lately they are not particularly popular, except during restoration work of historical monuments. Therefore, gazebo coloring may well be done by them.
For silicate paints, potassium silicate is used as a binder. It is also called liquid glass.
It is quite difficult to work with such paint, so only specialists should do the painting. If the wall was previously painted with acrylic or silicone paints, then careful cleaning of the surface will be required.
In cement paints, white or colored Portland cement is used as a binder. These are alkaline materials, so you need to treat pigments with caution: only those that are not afraid of alkali.
To make the painting material more moisture resistant, slaked lime is added to it, approximately 15%. and to avoid atmospheric disasters, hydrophobic substances are introduced (no more than one percent). Despite the fact that they are stable and vapor-permeable, there is one drawback - they peel off.

Upgrading hard-to-reach surfaces and places

Now let’s figure out how to paint a gazebo at the dacha correctly. There is a technology here, without which the coating will not last long.
And after you have decided what paint to paint the pine gazebo, you will need to apply it correctly. So let's look at how to paint a gazebo step by step, starting with preparation.
To make it easier to reach hard-to-reach places, for example, a baluster, roll the sandpaper into a tube with a diameter corresponding to the bending radius of the profile.

Putty	Most wood surfaces that have been sanded with sandpaper should not be painted immediately, because there are scratches, cracks, and irregularities on the surface that require additional processing– puttying. The building materials market presents various types putty mixtures, they can be both universal and specialized for a specific surface. After sanding and filling the surface, treat the area with a damp cloth. If small holes appear, fill them with putty. Relief products must be puttied with a finely dispersed putty mixture. After cleaning, the surface will become perfectly smooth. When processing a relief product, the putty should be smoothed with a thin brush; after drying, you can do without sanding.
Sealing large holes	To eliminate a large hole, for example, a gap behind a baseboard, use polyurethane foam, it is more effective than putty and holds more firmly. When it swells and hardens, you need to cut off the excess with a knife.
Sealant	Initially, you should clean paint residues and other dirt from cracked joints with a metal spatula. Dust must also be removed. It will not be possible to clean the sealant after it dries; it must be smoothed before it dries. Once the joint is filled with sealant, treat it with a damp sponge and run a wet finger along the seam. If you then coat the sealant with paint, small cracks may form; to prevent this from happening, treat the joint with drying oil before painting.
Primer	To ensure the result exceeds your expectations, think about what materials you will use for preparatory work and final processing. It all depends on the basis building material, which can be either oil-based or water-based. The technique for carrying out the work must also be worked out.

So:

If you plan to use water paints, the seams should be primed with a shellac-based polish. Water-based paints adhere well to it; the paint will not be absorbed into the surface of the seams, and they will not appear.
When using varnish, there is no need to prime the surface. If you are using alkyd varnish, first apply drying oil to the surface; in this case, the varnish consumption will be less.
The surface must always be primed with new brushes; in no case should one brush be used to apply primer and paint. The brush sheds when first used, but then the hairs will not fall out.
On the surface, draw stripes vertically, the length of which is thirty centimeters. Each strip should be painted after a new paint brush and distributed evenly over the surface.
Without dipping the brush into the paint, smooth the painted surface with the tip of the flute. This application technique paint and varnish material should be used both for applying lower layers of paint and for upper ones on horizontal surfaces.

Now let's think about how to paint the wooden floor in the gazebo. First of all, preparation is carried out as described above.
It is better not to use water-based paints when painting the floor. They are less resistant to wet damage. Therefore, it is better to use acrylic or oil ones.
You can already decide how to paint the gazebo more beautifully without any problems. The main thing is that the paint for the gazebo must be chosen correctly.
Before work, you should look at the photo and select the desired design. And now you know how to paint a gazebo.

How to paint a gazebo correctly?

If you want to get a gazebo that will attract attention, you need to prepare for painting. Before starting to paint the first layer, the wood is cleaned of the smallest adhering particles.
It could be dust, dirt, sawdust. If the gazebo has been previously painted, all previous layers of paint are removed.
In the case when the paint has not peeled off and is combined with the new version, it is enough to wash it with water and baking soda. Severely damaged paint is removed with a spatula.
Sometimes the wood is burned blowtorch or use a special wash. Don't forget to clean and putty the surface!
In the case when the gazebo is made of new wood, you need to remove all the knots and make cuts in the cracks, otherwise the wood will begin to deform. Painting should begin after the material has dried. You can use brushes, rollers, or, if you have the means, use spray paint.
Be sure to apply several layers to increase the longevity of the paint, rather than having to deal with restoration every year. After the first layer has dried, you can continue painting.

What could please a summer resident’s eye more than beautiful courtyard country house? - one of the components of this picture. Peeling walls and traces of wind and rain undoubtedly spoil it. Let's figure out what to paint outside to protect it from precipitation and maintain a pleasant appearance.

All about paints and varnishes for wood:

Before starting work

Painting a wooden gazebo - important stage arrangement of the dacha. Why can't the tree be left as is, without covering?

Rain, snow, dampness and wind make wood, the main material of construction, fragile and soft. In addition, negative factors include exposure to ultraviolet radiation and the activity of insects, fungi and other pests. Without painting, the gazebo will not last even five years.

In many ways, the question of how to paint a structure depends on the personal preferences of the owner of the site: whether he wants to preserve the structure of the wood or not. But the material from which the structure is made and the condition of the board are also important.

What to pay attention to before painting

A newly built structure made of sanded boards can be safely covered transparent compounds. They fit perfectly on a smooth surface.
If the wood is not treated, there are chips, roughness, transparent paints and varnishes will not work. They will lay down differently on areas with different structures: smooth ones will begin to shine, while rough ones will remain matte. If it is not possible to plan the boards, it is better to use tinted substances. And apply them not with a brush, but with a spray gun.
Old wood that has changed color is also not the best candidate for clear coats. Still, it’s worth masking its heterogeneity.
A special case: when the gazebo has already been painted, and you want to update its color. A lot depends on the state of this layer. If the paint has peeled off in some places and is worn, it is better to clean the boards and remove such coating.
Apply a new layer to old specialists are not recommended, so they are protective functions are decreasing. And, most likely, the fresh layer will quickly peel off under the influence of precipitation and wind.

Choosing how to paint a wooden gazebo

How to paint a wooden gazebo? There are several options: transparent and opaque.

Water based varnish

the main task such varnishes - to emphasize the natural tone and, which looks so impressive in the photo.

Also divided into three categories depending on the basis.

Latex penetrates deeply into the wood and protects it well from moisture.
Acrylics perfectly impregnate the material, and at the same time contain an antiseptic that protects it from mold and fungi.
Stains are suitable as a primary coating - a base. They are cheaper than latex and acrylic analogues, but also have protective properties.

Oil products

There are two types of substances: drying oil and resin-based.

Drying oil is the cheapest option. However, it is rarely used as self-coating. The thing is that even when it dries, it still remains sticky. But thanks to this particular property, it holds the next layer well, usually consisting of pigmented paint. Resin-based primers serve as a base for finishing coat. They provide good adhesion and protection against biocorrosion.

Tinting varnishes

These are compositions based on oils and resins, to which are added solvents, stabilizers and other substances that accelerate drying.

It is difficult to work with tinted varnishes on your own. They take a long time to dry, and if you don’t wait until they harden completely, the next layer will definitely pull down the previous one. In addition, they are toxic, easily washed off with water and become cloudy over time. They are used most often simply because of the convenience of the container.
Parquet and yacht varnishes are waterproof compounds that have no color. They have a high degree of protection against ultraviolet radiation and exposure to water. They come in varying degrees of matte finish: from completely matte to glossy. They also have a long service life - up to five years.

Dye

IN hardware store Today, dozens of species are represented. Some of them are universal, others are only for internal or external use. They also differ in the basis. paint a wooden gazebo?

Acrylics are made on the basis of water dispersions acrylic resins. After application, they form a film that protects walls even from mechanical damage. Environmentally friendly and safe solutions of this type are resistant to moisture and fit well on wooden and concrete surfaces.
Silicone have good performance wear resistance, resistant to temperature changes, and is not affected by ultraviolet radiation. The biggest disadvantage is the high price of such compounds. It is rarely used in its pure form; acrylic-silicone mixtures are more often purchased.
Silicate compounds cannot be applied to surfaces that have been painted with silicone or acrylic paint, and the wood must be processed. They fit well on varnish and plaster. When working, you should follow the manufacturer's recommendations: silicate paint is toxic.
Another type - alkyd paints - are less environmentally friendly than water-dispersion paints. They are made using chemical solvents. But their price is lower - especially important if you need to paint over large area. Resistant to moisture and impact aggressive environment, aclide solutions dry quickly and do not require special skills to work with. Disadvantages: short service life (about one year), instability to ultraviolet radiation and a strong odor. However, the latter quickly erodes when working with building facades.

Mastic

Mastic prevents mechanical damage to the floor, protects it from moisture and even dirt. It contains wax or polymer substances that replace it to reduce the cost of the product.

Mastic also improves the appearance of floors: it adds a beautiful shine to them. To maintain this effect, it needs to be updated once every six months or a year.

Before use, hot mastics are heated to temperatures above 150 degrees. However, due to the high risk of fire, they are not used at home. Cold mastics do not need to be heated. They come in several types, which differ in the main component.

Types of mastic

The most fragile ones are water-soluble; as you might guess, they are easily washed off with water.
Water-based mastics have proven themselves well, and they are also the most popular. They protect wood from dirt, are easy to apply and are suitable for any type of wood.
Wax mastic is rarely used for outdoor work; more often it is purchased for moisture-sensitive wood species: beech, birch, juniper and others.

Enamel

You can use enamel to paint individual elements: railings, decorative details. For example, Rexton “Universal Enamel” has good adhesion to the surface, creates a durable coating, and does not flake or flake. And since it is with the railings that there is frequent contact, you won’t have to repaint it for a long time. If the wood has already been painted, only 2-3 layers will be needed. Reхton enamel is excellent for painting open elements, as it can withstand direct sunlight, precipitation and temperature changes, that is, even in winter the coating will remain unchanged.

Another advantage of using Rexton enamel for painting railings is that the coating does not run off and lays down evenly.

Work order

Cleaning. Skipping this step is not best idea, it is required. In fact, the service life of the coating depends on the preparation and cleaning of the board. The purified material ensures good adhesion - adhesion of the layers.
This is followed by wood impregnation. The solution will help protect the material from temperature changes, humidity and fungi. When choosing an impregnation, pay attention to its compatibility with the paint with which you plan to cover the wood in the future.
The third stage is primer. You can skip it, but it is not advisable. The primer also provides good adhesion to the materials.
Finally, after completely dry soil you can start decorative finishing walls and floor.

Material prepared by: Anastasia Khripunkova