Every owner personal plot strives to improve it, and if there is no opportunity and space for arranging a pond, alpine slide, then for flower pots There will definitely be a place. Concrete containers will play the role of small architectural forms, their use in the landscape will create aesthetic visual accents and “dilute” the monotony of green spaces.

Flowerpots are the strongest, wear-resistant products; they are not afraid of frost, precipitation, or sunlight. In terms of durability they are not inferior metal options: if they are capable of corroding, heating up, crumple from falling and impact, then this is not typical for concrete bowls.

What types are there?

Flowerpots can be used in the interior of a room, both miniature (for small flowers) and large (for palm trees, indoor trees).

Pots are classified into those that:

• suitable for outdoor decor;
• decorate and function in the rooms.

By size they are distinguished:

• small;
• average;
• large and very large.

Depending on the shape, concrete pots are:

• simple: rectangular, square, round, triangular, oval, like a traditional vase;
• complex: shaped (for example, in the form of a goblet, cup, boot, bird, person, animal), multifaceted (in the form of a pyramid, prism, octahedron, star).

According to the placement method they are divided into:

• suspended - reinforced with a chain or rope and in a hanging position;
• floor/ground – located on a horizontal surface, this includes pots that are placed on a windowsill or table;
• wall-mounted – implying fixation to vertical structures both inside the building and on the facade.

As for the decor, here, as in the case of the shape of the vessel, there are no limits to imagination. Flower pots with the texture of stone and concrete look restrained but tasteful. Flowerpots decorated with fragments of broken plates, anthracite, shells, and river/sea pebbles look no less attractive. Products painted in one or more colors will attract more attention, and if they have intricate patterns and designs on them, you won’t be able to take your eyes off them at all.

The next moment that plays significant role– this is the production of flowerpots. Factory flowerpots are good because they are completely ready for use. There is no need to do them, waste time and effort. The disadvantages are: price (large, shaped pots are especially expensive) and not always the availability of what the consumer has in mind and wants to buy (despite the wide range, manufacturers mainly focus on those variations of products that are in highest demand).

Homemade flower pots from concrete mixture characterized by a labor-intensive process, but otherwise they benefit from industrial ones. For example, you can make almost any type of vessel yourself and decorate it the way you want. In terms of price, a handmade creation will be cheaper.

How to make an elegant pot on your own?

If you do not want or are afraid to mix cement with components incorrectly, such as Alternative option You can use ready-made artistic concrete. The surface of a product made from such material will be smoother, more interesting, and have different textures. This is achievable due to the fact that decorative composition in addition to cement and sand, contains small fragments of minerals, polymer additives. Some varieties contain dyes. But even if they are not there, it is allowed to introduce organic or aniline ones yourself.

When making pots not from a purchased concrete mixture, but from a home-made concrete mixture, it is recommended to carefully study all the nuances. For clarity, it is better to watch the video on YouTube.

It’s worth getting the ingredients in advance: cement, crushed stone or gravel, sand. The ratio of components should be 2:3:3. The filler fraction size does not exceed 3-4 mm. Initially, Portland cement and sand are mixed, then crushed stone/gravel is added to them. Having achieved homogeneity after combining the ingredients, a slide is collected from the mass, in the middle of which a hole is made. You have to pour water into it, and in limited portions, in order to control the dilution process. At the end, the cement mixture should not turn out to be liquid: it should be brought to the state of wet clay.

Now to make a flowerpot you need to find 2 containers of equal height, but different in volume. What it will be - basins, buckets, jars or boxes depends on the shape you are striving for. By inserting one vessel into another, a formation should form between them. free space. It will be the thickness of an indoor or outdoor flowerpot.

Having made sure that everything is satisfactory in the future flowerpot, you will need to solve the problem of unhindered removal concrete base from the workpiece. For this purpose, before pouring the solution into the gap between the containers, they need to be lubricated vegetable oil or a non-stick agent, with the larger vessel on the inside and the smaller one on the outside. If you plan to make a large flower pot, or simply want to increase its strength, you must additionally use steel wire/metal mesh to reinforce the surface.

Manufacturing progress:

• a vessel with a larger volume is filled with concrete up to half;
• a small vessel is installed in its center;
• it should be pressed so that it enters the mass, but at the same time a few centimeters remain to the bottom;
• something heavy (brick, sand, stone) is placed inside the smaller container to ensure its constant position;
• the solution is applied to the top of the larger product;
• if the flowerpot involves planting living plants, then at the stage when the cement has not completely set, you need to drill several holes for moisture removal;
• to create optimal conditions To harden and prevent dust, household waste, and insects from getting into the mixture, the pot is covered with film;
• for 2-4 days the solution remains to harden;
• After this time, the inner vessel is removed, and the pot continues to dry in the sun for several more days.

It’s not difficult to make a concrete planter with your own hands, the main thing is to have a concrete mixture on hand. The main components of concrete are cement, sand, crushed stone and water, but we will do without crushed stone and exclude it from the preparation of the mixture. The created concrete planter is ideal for cacti. As you know, cacti grow in rocky deserts against the backdrop of mountainous terrain, on rocky ledges. So, a concrete planter resembles a rocky ledge - a native dry place for thorny plants. For work, you can use sea or river pebbles, fragments of broken plates, shells - all this decorates and decorates the concrete planter self made. Watch the master class and get inspired by hand-made to decorate your garden or dacha, especially since spring will come very soon and all our efforts will be aimed at improving the dacha or garden plot.

How to make a concrete pot with your own hands.

For work we will need:

• concrete mix,
• plastic, aluminum or enamel bowl required size,
• plastic bag,
• sea ​​or river pebbles,
• shells, fragments of broken plates,
• latex gloves,

Let's get to work. For the concrete mixture we take cement, sand and water. To create a pot with a capacity of 0.5 liters (meaning a bowl that will serve as a mold for concrete), we will need 1 kg of cement, 0.5 kg of sifted sand and 0.4 liters of water. We put protective rubber gloves on our hands. Mix cement with sand and fill it with water, mix a thick concrete mixture. Place the bowl bottom up on a plastic base and cover it with polyethylene.

The concrete mixture should be thick enough, not liquid, and it should not flow during operation. If you get a runny composition, add more cement. We begin to cover the bowl with concrete mixture, starting from the bottom edge with upward movements. The thickness of the concrete mixture should be no more than 2-3 cm. Smooth the entire surface with your hands, lightly moistening the gloves with water. Don't forget to make a hole in the bottom of the flowerpot.

We decorate the pots with shells, pebbles and fragments of broken plates.

We leave the concrete pots to dry, this will take about two days at room temperature. After drying, remove our bowl from the pot. The finished flower pot can continue to be decorated along the top edge with pebbles and shells. To do this, take some cement and water, mix the mixture and decorate the edge of the flowerpot.

That's the whole master class) We place the substrate for cacti in a pot we created ourselves and plant our prickly plants. Good luck to you!

When copying, an active link to Handmade-Paradise.ru is required! You can send this post to social media and bookmarks: Do you want to receive master classes and new handmade ideas by email? Subscribe to daily site updates:

handmade-paradise.ru

How to make a pot from cement and fabric with your own hands for outdoor decoration

A flowerpot is a hollow decorative vessel for a pot of plants. Most often they are made of plastic, wood or ceramics; they can even be made from a rag. For outdoor decoration they use something more durable and resistant to various natural conditions material. So, a cement planter will serve you for many years. Therefore, we suggest you learn how to make a flowerpot from cement and fabric with your own hands.

Differences from the pot

Before you start, you should know fundamental differences pots from pots.

Both of these elements can be done in interesting ways design solutions. The main advantage of flower pots over flower pots is that there are no holes in the tray. It turns out that when watering you will not need to ensure that water mixed with soil does not flow onto the surface of the furniture.

However, it is worth noting that some types of flowers do not like stagnant water; excess moisture from the pots may need to be removed.

Particularly popular are hanging planters:

Let's get started

Outdoor planters, as mentioned above, are best made from durable materials. This master class will focus on plant pots made of cement and rags.

Upon completion of the work, you should know that the cement planter is easy to decorate acrylic paints.

In order to make this outdoor planter, you will need:

• concrete mixture (cement + sand + water);
• old rags;
• bucket;
• protective gloves;

The manufacturing method is extremely simple (provided with a description).

You need to take an old rag (and the more holey it is, the more interesting the end result will be), thoroughly moisten it in the concrete mixture and throw it over an inverted bucket. The rag is the frame of the future flowerpot.

You can use any other object of the desired shape as a base. All you have to do is wait until the product dries well. If desired, you can decorate it with paints.

A few photos of finished flowerpots:

In order for the flower pot to be as durable as possible, you should not rush, you need to give it two to three days to completely dry. This product will withstand any weather surprises.

Video on the topic of the article

More more ideas for DIY flowerpots, look in the video selection.

knittochka.ru

Cement crafts for the garden: more than 20 ideas, instructions and master classes

Having country cottage area, you always want to arrange it, and in some special way. However, garden decorative elements They are not cheap, and they are not durable.

People with developed imagination can do original crafts for a garden made of cement, which is not only highly resistant to various types of influence (frost, hail, sun, water), but also accessible (you can buy it at any hardware store for a reasonable price).

The nuances of working with cement mortar

For decoration and design additions, you can use flower pots, flowerpots, figurines of fairy-tale characters or objects flora made with your own hands from cement. This material cannot be called capricious, and most have a large or little experience work with him. Still, there are several important rules that must be followed in order for crafts from cement mortar turned out to be high quality and durable.

The technology for preparing the mixture itself is as follows. The main components are prepared: cement, construction sand, water and tile adhesive (for better ductility and reducing the risk of microcracks). For 1 part of cement, take 2 parts of sand (for greater strength, you can take 1 part) and 1 part of glue. IN last resort add water in small portions until the consistency of thick sour cream. It is convenient to work with such a mixture: it does not flow and at the same time is quite plastic.

All cement products require prolonged drying. Hardening can last up to 7 days. To prevent the surface from cracking, the finished creation is covered with polyethylene. To give the product a beautiful and correct form, the base is placed on a hill of sand or buried in it (depending on the idea), but not on flat surface.

After complete hardening, the figure must be coated with a primer and only after that can paint or varnish be applied. If the craft has roughness and other irregularities, it should be refined with sandpaper and a file before priming.

In addition to cement mortar, concrete is sometimes used, which is characterized by the presence of large fractions (pebbles or crushed stone) and increased strength. Crafts made from concrete for a summer residence can be represented by large monolithic boulders, and this material is also convenient to use to create a base for various compositions (a platform for a fountain, a pedestal for a sculpture, a terrace for flower pots, etc.).

Another material similar in its application is gypsum. It is not as strong as cement, but more plastic and decorative. It can be used to create hollow shapes. For garden creativity, molding (sculptural), acrylic and architectural views. When working with this material, you need to take into account its rapid hardening. It is often recommended to add it to cement mortar when creating sculptures.

Having no experience using cement in decorative purposes, it is better to start with something simple that does not require modeling skills and obtaining the desired consistency. The first exhibits in your garden can be cute mushrooms, colorful balls or original flower pots.

To make a mushroom you will need an old rubber ball (the size of the cap will depend on its size), a plastic bottle (it will become the basis for the stem, its size should be proportional to the cap), a metal rod to attach the cap to the stem. The ball is cut into two halves, one of which is placed in a bucket of sand and pressed evenly. Next, cement mortar is poured into the resulting form and leveled.

U plastic bottle cut off the bottom and neck and insert it into the filled form in the center, immersing it by 1 - 2 cm. Then, using a long iron rod, connect the future stem and cap of the mushroom and fill the cavity inside the bottle with the solution. The product should harden for several days, after which you need to remove the piece of the ball and the plastic cylinder.

After a few more days, the product can be coated with paint and decorated. different elements. Mushrooms of different sizes look impressive on the plot in the form of a small clearing. It is also worth noting that your imagination may tell you to use other containers (bowls, jars) and methods for making garden mushrooms.

It’s enough to just make an openwork ball that seems so light and airy. For the base, use a balloon (the size of the future shapes depends on how much you inflate the balloon). Next in ready solution Place any rope and then wrap it around the ball.

Do not wrap the base too tightly; you need to leave enough holes for further removal of pieces of the burst ball. When the product is dry, you can begin decorative coating.

If you cover air balloons cement mortar with the addition of a small amount of gypsum for faster hardening, you can get original garden lanterns or flower pots.

Using this technique you can also make vases for dried flowers. In this case decorative painting is exposed not only to the external, but also inner side.

If you pour the solution into a small hole in rubber balls, you can get monolithic balls different sizes. Painted in different bright colors and chaotically scattered around the garden, they will become laconic and stylish decoration.

Using plastic containers, you can make a flower pot for Crassula and Crassula Ovata cacti. The container is wrapped plastic bag, and a bag of clay or sand is placed inside so that the container holds its shape. Next, it is covered with cement mortar. After everything is completely dry auxiliary materials are removed, drainage holes are made in the bottom using a drill, the product is primed and painted.

It's very easy to make a flowerpot using a plastic bucket or vase and another suitable container.

One container is inserted into another, and the solution is poured into the space between them. The result is a high-quality product that can be further decorated by showing your imagination to the fullest.

Flowers planted in flowerpots made from crossed palms look attractive. To create such a masterpiece, use ordinary rubber gloves, which are evenly filled with the solution. For rigidity, you need to insert a thick wire rod into each finger. To ensure a high-quality product, air bubbles must not be allowed to form.

When the gloves are filled, they are given the desired shape and fixed. After a few days, the rubber is cut and removed. If you need to connect two palms, then use the same solution. At the final stage, the surface is polished with sandpaper, primed and painted.

Complex figures with a frame

It's more fun to decorate your Vacation home sculptures of animals and mythical characters. Such creations involve the preliminary production of a durable frame and layer-by-layer application of cement mortar.

Interesting flowerpots can be made using buckets from building mixtures. At the first stage, a container of suitable size is wrapped plaster mesh and covered with a thick layer of cement. At the second stage, until complete hardening, decorative adjustments are made, making an imitation of an old stump with natural wrinkles on the bark.

Up close artificial reservoirs A monolithic figure of a hippopotamus would look appropriate. The place for it must be determined immediately and carefully aligned, since in the future the figure will be stationary.

Two elongated plastic basins, which must be fastened with wire, are suitable as a frame. Another option is also possible: a thick cement solution is covered on top of a pile of broken bricks or crushed stone.

The figure itself does not contain complex elements and is easy to perform. After hardening, the product is treated with fixing impregnation and dry pigment for concrete, rubbing the powder with a hard sponge.

More complex sculptures are made in several stages: 1) making a frame from wire and foam plastic or containers; 2) covering the workpiece with a plaster mesh; 3) applying the mixture in several layers; 4) formation small parts(facial features, special texture, folds of clothing, etc.); 5) primer and painting finished work.

Flowerpots in the shape of swans will become an elegant decoration of the garden. The body frame is an old plastic basin, the neck is woven wire. The head, wings and imitation plumage will have to be made from cement mixture, demonstrating the skills of a sculptor.

Monolithic figures have a significant weight, so as an alternative there is a way to create lightweight large objects. You can decorate your garden with boulders of different sizes.

To make them, any unnecessary and lightweight material(trimmings polyurethane foam, plastic bottles, foam).

The resulting base is wrapped in a plaster mesh and covered with thick cement mortar. The more irregularities and protrusions there are, the more natural the “stone” will look.

Small garden figurines made from a mixture of cement with the addition of gypsum or Portland cement.

Here you can use the manufacturing methods described above, as well as any basics: old toys, items of clothing, household utensils.

Step-by-step manufacturing instructions: 3 master classes

To take a closer look at the nuances of the creativity presented in the article, let’s look at best master classes with a step-by-step explanation of the work being carried out.

1. Spectacular flowerpots made of cement and fabric

To make flowerpots for the garden from cement and fabric, use either pure cement or Portland cement. In this case, the mixture with water should be quite liquid. You will also need a bucket or other container for the frame, a piece of polyethylene and a piece of fabric.

The material must be dense enough and absorb liquids well, i.e. synthetics will not work here. Better to use cotton fabric.

• Cutting off a piece the right size. If you need smooth edges, then round them;
• We wet the material generously in the solution;
• We attach polyethylene to the prepared bucket;
• Lay the fabric soaked in the solution on top and smooth it out;
• After 2 days, the cement will set and the bucket can be removed;
• The product is lightly moistened with water and left to dry completely for another 5 days.

Even large-sized plants can be planted in a ready-made flowerpot.

Experiment with the shape and coloring of flowerpots and create your own unique compositions.

2. Funny cat for the garden

First, we prepare a frame from a cut plastic bottle and wooden slats which are fastened with wire.

The solution is prepared from cement and sand in a 1:1 ratio; additionally (directly into the hand) gypsum is added during the work. By gradually applying the solution, all the details of the sculpture are created.

The finished figure is polished with a damp hand and left to dry for 4 days. Finishing touch- painting with water-based emulsion or enamel.

3. Large leaf drinker for birds and pets

No less successful and universal decoration the garden will have a sheet of cement. A plastic film is placed on a mound of sand, and then a large sheet (the mound will allow you to get a shape with a depression, rather than a flat one). If there are small holes in the sheet, they should be covered with small leaves so that the cement mortar does not leak.

Cover the workpiece with film for several days until it dries. Then the sheet is removed, primed and painted.

If desired, you can make a fabulous fountain from several similar blanks.

Having a summer cottage, you always want to arrange it, and in some special way. However, garden decorative elements are not cheap, and they are not durable.

People with a developed imagination can make original crafts for the garden from cement, which is not only highly resistant to various types of influence (frost, hail, sun, water), but also accessible (you can buy it at any hardware store for a reasonable price).

For decoration and design additions, you can use flower pots, flowerpots, figurines of fairy-tale characters or plant objects made with your own hands from cement. This material cannot be called capricious, and most people have a lot or little experience working with it. Still, there are several important rules that must be followed to ensure that crafts made from cement mortar are of high quality and durable.

The technology for preparing the mixture is as follows:. The main components are prepared: cement, construction sand, water and tile adhesive (for better ductility and reducing the risk of microcracks). For 1 part of cement, take 2 parts of sand (for greater strength, you can take 1 part) and 1 part of glue. Lastly, add water in small portions to the consistency of thick sour cream. It is convenient to work with such a mixture: it does not flow and at the same time is quite plastic.

All cement products require prolonged drying. Hardening can last up to 7 days. To prevent the surface from cracking, the finished creation is covered with polyethylene. To give the product a beautiful and correct shape, the base is placed on a mound of sand or buried in it (depending on the idea), but not on a flat surface.

After complete hardening, the figure must be coated with a primer and only after that can paint or varnish be applied. If the craft has roughness and other irregularities, it should be refined with sandpaper and a file before priming.

In addition to cement mortar, concrete is sometimes used, which is characterized by the presence of large fractions (pebbles or crushed stone) and increased strength. Crafts made from concrete for a summer residence can be represented by large monolithic boulders, and this material is also convenient to use to create a base for various compositions (a platform for a fountain, a pedestal for a sculpture, a terrace for flower pots, etc.).

Another material similar in its application is gypsum. It is not as strong as cement, but more plastic and decorative. It can be used to create hollow shapes. For garden creativity, molding (sculptural), acrylic and architectural types are used. When working with this material, you need to take into account its rapid hardening. It is often recommended to add it to cement mortar when creating sculptures.

Having no experience in using cement for decorative purposes, it is better to start with something simple that does not require modeling skills and obtaining the desired consistency. The first exhibits in your garden can be cute mushrooms, colorful balls or original flower pots.

To make a mushroom you will need an old rubber ball (the size of the cap will depend on its size), a plastic bottle (it will become the basis for the stem, its size should be proportional to the cap), a metal rod to attach the cap to the stem. The ball is cut into two halves, one of which is placed in a bucket of sand and pressed evenly. Next, cement mortar is poured into the resulting form and leveled.

The bottom and neck of a plastic bottle are cut off and inserted into the filled form in the center, immersing it by 1 - 2 cm. Then, using a long iron rod, the future stem and cap of the mushroom are connected and the cavity inside the bottle is filled with the solution. The product should harden for several days, after which you need to remove the piece of the ball and the plastic cylinder.

After a few more days, the product can be coated with paint and decorated with various elements. Mushrooms of different sizes look impressive on the plot in the form of a small clearing. It is also worth noting that your imagination may tell you to use other containers (bowls, jars) and methods for making garden mushrooms.

It’s enough to just make an openwork ball that seems so light and airy. For the base, use a balloon (the size of the future shapes depends on how much you inflate the balloon). Next, any rope is placed in the prepared solution and then the ball is wrapped around it.

Do not wrap the base too tightly; you need to leave enough holes for further removal of pieces of the burst ball. When the product is dry, you can begin decorative coating.

If you cover the balloons with cement mortar with a small amount of gypsum added for faster hardening, you can get original garden lanterns or flower pots.

Using this technique you can also make vases for dried flowers. In this case, not only the outer side, but also the inner side is subjected to decorative painting.

If you pour the solution into a small hole in rubber balls, you can get monolithic balls of different sizes. Painted in different bright colors and randomly scattered around the garden, they will become a laconic and stylish decoration.

Using plastic containers, you can make a flower pot for Crassula and Crassula Ovata cacti. The container is wrapped in a plastic bag, and a bag of clay or sand is placed inside so that the container holds its shape. Next, it is covered with cement mortar. After complete drying, all auxiliary materials are removed, drainage holes are made in the bottom using a drill, the product is primed and painted.

It's very easy to make a flowerpot using a plastic bucket or vase and another suitable container.

One container is inserted into another, and the solution is poured into the space between them. The result is a high-quality product that can be further decorated by showing your imagination to the fullest.

Flowers planted in flowerpots made from crossed palms look attractive. To create such a masterpiece, use ordinary rubber gloves, which are evenly filled with the solution. For rigidity, you need to insert a thick wire rod into each finger. To ensure a high-quality product, air bubbles must not be allowed to form.

When the gloves are filled, they are given the desired shape and fixed. After a few days, the rubber is cut and removed. If you need to connect two palms, then use the same solution. At the final stage, the surface is polished with sandpaper, primed and painted.

Complex figures with a frame

It’s more fun to decorate your country house with sculptures of animals and mythical characters. Such creations involve the preliminary production of a durable frame and layer-by-layer application of cement mortar.

Interesting flowerpots can be made using buckets from construction mixtures. At the first stage, a container of suitable size is wrapped with a plaster mesh and covered with a thick layer of cement. At the second stage, until complete hardening, decorative adjustments are made, making an imitation of an old stump with natural wrinkles on the bark.

A monolithic figure of a hippopotamus would look appropriate near artificial reservoirs. The place for it must be determined immediately and carefully aligned, since in the future the figure will be stationary.

Two elongated plastic basins, which must be fastened with wire, are suitable as a frame. Another option is also possible: a thick cement solution is covered on top of a pile of broken bricks or crushed stone.

The figure itself does not contain complex elements and is easy to perform. After hardening, the product is treated with fixing impregnation and dry pigment for concrete, rubbing the powder with a hard sponge.

More complex sculptures are made in several stages: 1) making a frame from wire and foam plastic or containers; 2) covering the workpiece with a plaster mesh; 3) applying the mixture in several layers; 4) formation of small details (facial features, special texture, folds of clothing, etc.); 5) priming and painting the finished work.

Flowerpots in the shape of swans will become an elegant decoration of the garden. The body frame is an old plastic basin, the neck is woven wire. The head, wings and imitation plumage will have to be made from a cement mixture, showing the skills of a sculptor.

Monolithic figures have a significant weight, so as an alternative there is a way to create lightweight large objects. You can decorate your garden with boulders of different sizes.

To make them, any unnecessary and lightweight material (cuts of polyurethane foam, plastic bottles, polystyrene foam) is tied into a tight lump with wire.

The resulting base is wrapped in a plaster mesh and covered with thick cement mortar. The more irregularities and protrusions there are, the more natural the “stone” will look.

Small garden figurines are made from a mixture of cement with the addition of gypsum or Portland cement.

Here you can use the manufacturing methods described above, as well as any basics: old toys, items of clothing, household utensils.

Step-by-step manufacturing instructions: 3 master classes

To examine in more detail the nuances of the creativity presented in the article, we will consider the best master classes with a step-by-step explanation of the work being carried out.

1. Spectacular flowerpots made of cement and fabric

To make flowerpots for the garden from cement and fabric, use either pure cement or Portland cement. In this case, the mixture with water should be quite liquid. You will also need a bucket or other container for the frame, a piece of polyethylene and a piece of fabric.

The material must be dense enough and absorb liquids well, i.e. synthetics will not work here. It is better to use cotton fabric.

• Cut a piece of the desired size. If you need smooth edges, then round them;
• We wet the material generously in the solution;
• We attach polyethylene to the prepared bucket;
• Lay the fabric soaked in the solution on top and smooth it out;
• After 2 days, the cement will set and the bucket can be removed;
• The product is lightly moistened with water and left to dry completely for another 5 days.

Even large-sized plants can be planted in a ready-made flowerpot.

Experiment with the shape and coloring of flowerpots and create your own unique compositions.

2. Funny cat for the garden

First, we prepare a frame from a cut plastic bottle and wooden slats, which are fastened with wire.

The solution is prepared from cement and sand in a 1:1 ratio; additionally (directly into the hand) gypsum is added during the work. By gradually applying the solution, all the details of the sculpture are created.

The finished figure is polished with a damp hand and left to dry for 4 days. The final touch is painting with water-based emulsion or enamel.

3. Large leaf drinker for birds and pets

An equally successful and versatile garden decoration would be a sheet of cement. A plastic film is placed on a mound of sand, and then a large sheet (the mound will allow you to get a shape with a depression, rather than a flat one). If there are small holes in the sheet, they should be covered with small leaves so that the cement mortar does not leak.

Cover the workpiece with film for several days until it dries. Then the sheet is removed, primed and painted.

If desired, you can make a fabulous fountain from several similar blanks.

The design of a garden plot is important stage, which allows you to turn inconspicuous flowers and plants into a whole work of art. It’s not difficult to make a cement pot with your own hands – the master class will allow you to master the manufacturing technique various options. These are original flowerpots for growing flowers. They make the vegetation brighter and more unusual, adding sophistication and style to the overall design.

Planters for the garden made of cement

If you want to make a cement planter with your own hands for the garden, then you should first consider important rules and features of the manufacturing process. It is quite simple, but there are still some principles that must be followed.

For making a flowerpot or flowerpot big size You will need to prepare the following components:

• a mold made of a plastic base, the diameter should be 53 cm and the height should be 23 cm;
• the solution will require white cement, perlite (agroperlite), high-moor peat;
• oilcloth or cellophane, you need to take a bag or a piece that will cover the entire surface of the plastic container;
• metal wire frame or reinforcing structure;
• cleaning brush.

To make a cement pot with your own hands, you should consider a master class, which is carried out in several stages:

1. First you need to make a solution. It will require 2 parts of white cement, one part of perlite (agroperlite) and two parts of high-moor peat. For measurements, it is better to use a one and a half liter bucket.
2. Next, the dry components are poured with water and stirred until a homogeneous consistency with a thick structure is formed.
3. Line the bottom and walls of a plastic flower pot with cellophane or film. It should completely cover the container to the very top.
4. When spreading the cellophane, it is important to straighten it, it must be even, otherwise strange folds and bumps will remain on the finished product.
5. First of all, put the solution on the bottom of the pot and level it well. The thickness of the layer should be 4 cm, you can check it with a match or toothpick.
6. To make the structure strong, it is necessary to install a frame made of metal wire or a reinforcing structure.
7. Since the product should be large, the solution will need to be mixed fractionally, in parts. In general, about 4-5 batches will be required.
8. It is imperative to consider a drainage hole. To make it, you need to put a cork on the bottom, which is pre-wrapped in film.
9. After the entire surface of the container is lined with cement, everything is covered with film and left to stand for about 10 days. During this period, the cement mixture will harden and gain strength.
10. If the surface dries out, it needs to be slightly moistened.
11. After about 8 days you will need to check readiness. To do this, the surface of the cement needs to be tapped a little; if the sound is not muffled, then the pot is removed from the container along with the film;
12. Next, the surface of the product is cleaned with a wire brush.

If you want to make a colored flower pot, then you will need to purchase special dyes. To do this, each part of the cement is painted in specific color and laid out in parts.

How to make a flowerpot from cement and fabric

To decorate the area, you can use a variety of elements - pots, flowerpots, flowerpots. You can do them yourself, especially homemade products turn out bright and original. For this reason, you definitely need to know how to make a flowerpot from cement and fabric. This will allow you to create a real work of art from scrap materials.

To make a flowerpot from fabric and cement with your own hands, you will need to prepare the following tools and materials:

1. The basis for preparing the solution. Better to use a budget option– Portland cement grade M400.
2. Preparation. It can be used as tulle, terry towel, burlap. It is advisable to use embossed fabric; it will allow you to make a brighter and more unusual flowerpot.
3. Any paint for concrete surfaces. It can be used as an acrylic, water-epoxy, polymer, vinyl, acrylic-silicone or lime paint mixture.
4. Paint brushes.
5. Packaging film made of polyethylene with a fine structure. A simple stretch film can be used as this component.
6. The form in which you will make a flowerpot from a rag and cement with your own hands. A conical bucket or any other container that has a conical and pyramidal shape is perfect for this.
7. A container in which the cement will be mixed.
8. To stir the solution, you can use an electric drill with a mixer attachment.

The process of making cement pots with your own hands is not particularly difficult, this will help detailed master class. It consists of several stages:

1. It is recommended to completely cover the form for the flower pots with film. This is required for convenience and removal finished product from cement.
2. A solution of cement is made in a container. First of all, water is poured in and cement is poured into it. Using a drill with a mixer attachment, the solution is mixed.
3. The finished solution should not be too thick; its consistency should resemble something between milk and sour cream.
4. The fabric is dipped into the solution; it should be completely immersed in the cement base.
5. It is better to leave the fabric in the cement for a while so that it is well saturated.
6. Next, the workpiece is removed from the solution and thrown onto a bucket. The edges should be straightened, folds can be created to make the flowerpot more vibrant and original.
7. After about 3 days, the pots can be removed from the container.
8. The surface of the product can be painted with any paint intended for concrete.

Flower pots in the shape of a shoe

It is worth noting! A flowerpot in the shape of a shoe will look beautiful and unusual on the site. It will give the vegetation sophistication and grace, and the garden will be transformed beyond recognition. Of course, manufacturing will require time and effort, but the result is worth it.

To make a flowerpot in the form of a shoe, you should prepare the required elements and materials:

• plastic canisters;
• threads with a thick structure;
• self-tapping screws;
• wide adhesive tape or tape;
• PVA glue;
• several packs of newspapers;
• base for mortar – cement and sand;
• water;
• egg trays.

If you don’t know how to make a flowerpot shoe from cement, then the master class will be able to quickly and easily master the manufacturing technique. Moreover, you can find it on the Internet detailed video with a description of the process.

So, all the work consists of several stages:

• for work you will need two canisters of 10 liters and one of 1 liter;
• cut along the lines drawn on the canister, and leave one intact;
• we place another on the side of one canister and secure it with self-tapping screws, and then wrap it with tape;
• then several holes need to be made at the bottom of the structure, this is necessary to ensure drainage;
• using small pieces of newspaper, PVA glue and papier-mâché technique, we give the product the shape of a shoe;
• then a solution is made, it is made from 1 part of the mixture, 3 parts of sand and water, stir well;
• after the newspaper form is ready, we screw screws along its entire lower surface on both sides and tie it with threads, this will ensure the best stability of the cement mortar on the surface of the form;
• the form can be pre-treated with a primer;
• Next, we apply cement to all surfaces and level it well, leaving the product until completely dry;
• after the shoe dries and becomes durable, it needs to be sanded;
• At the end we cover it with special paint for concrete.

The finished flowerpot in the shape of a shoe can be used as a garden decoration. It will give it brightness and positive notes. The vegetation in it will look stylish and elegant.

Making plant pots out of cement and rags is a fun activity that will captivate many people. This product can be made by anyone, even those who have never made designs of this type before. The main thing is to carefully study the instructions and basic manufacturing rules.

Step-by-step production of flower pots from fabric and cement

A flower pot, of course, is a purely practical thing. But what’s stopping you from working on its “appearance” and turning it into a bright accessory?

Concrete flower pot

You can make flowerpots for ampels from simple hemp.

Crochet a chain of air loops and connect them into a ring (the diameter should be slightly smaller than the bottom of the pot). Then knit row after row of single crochets or double crochets, and depending on the shape of the pot, add or subtract stitches. To hang, tie a long strip and attach to your new potty “outfit” using wire, key rings, or a leather strap.

"Branch" decor of a flower pot

Behind a small fence of thin branches there was a pot hidden. The branches should be smooth, ideally covered with moss and lichen. Cut many sticks of the same length, partially wrap some of them with thin woolen threads. Glue the ends of the threads. At the bottom and top, tie the branches to each other with wire to make a fence. Place it on the pot and connect the two sides with wire.

Finishing a flower pot with mosaic

Ordinary clay pots will become real masterpieces if you decorate them with a mosaic of pieces ceramic tiles. Apply frost-resistant tile adhesive to the container and place the shards in random order. Then seal the gaps between them with joint filler and immediately wipe the mosaic with a damp sponge. The next day, when the pot is dry, polish the product.

Unusual coating for pots

The easiest method to decorate a pot is to cover it acrylic varnish. It must be applied to a clean, dry surface that has already been primed. The varnish coating will look voluminous if you add sand, which is used to keep birds at home, such as parrots. Sprinkle sand onto the wet varnish applied in a thick layer.

DIY flower pot garland

Every summer resident has a barn or some other utility room Many plastic pots are stored, which are often used for transplanting plants or seedlings.

As a rule, these pots are stored in the most incredible way, and when you need them, you will never find them.

Try to remember how many similar pots we have, what size they are and whether we need to buy new ones...

Gardener-designer and TV presenter Olga Platonova suggests making... an original garland out of plastic pots.

You will need

• plastic pots
• aluminum fork
• long lace
• two clamps
• electric drill
• screwdriver, or hammer and nails

Making a garland from flower pots

Terrarium Hydroponic Plant Vases Vintage Flower Pot Transparent Vase…