It is necessary to sheathe the steam room and washing area in the bathhouse only with natural materials. Under no circumstances should you use plastic, as when heated it can emit fumes that are harmful to health. Also, do not use cladding ceramic tiles- This is a practice from Soviet times, when in public baths wall tiles were used. The ideal material for finishing is linden lining, but it should be noted that it is not cheap.

Linden lining

As mentioned above, the best lining for a bathhouse it’s a fake one. Compared to pine lining, linden lining is much more expensive, but has serious advantages:

• Does not emit resin;
• Has a pleasant smell;
• Doesn't get very hot, i.e. has low thermal conductivity;
• Does not darken for a long time when exposed to moisture.

The qualities of linden lining allow it to be used in areas of high temperatures and humidity, namely in a steam room. Naturally, in the steam room it is necessary to use linden lining not only for upholstering the walls, but also for making shelves. Linden shelves heat up significantly less than pine shelves.

Aspen lining

Aspen lining has many of the advantages of linden lining. It should be especially noted that aspen is quite resistant to rotting. Not many people know that aspen was used in Rus' in the construction of wells.

Unfortunately, the process of processing aspen wood is quite labor-intensive, which is why the cost of lining is unaffordable for many.

Cedar lining

The pine smell excites the soul! Perhaps, the best tree Coniferous species used for making lining is cedar. Cedar lining has even lower thermal conductivity than linden and aspen, however, it is quite difficult to find lining made from real cedar. Very often, under the guise of cedar lining, they sell cedar pine lining. The fact is that cedar does not grow in Russia. What we call cedar is cedar pine, which releases resin when heated.

Pine lining

Pine lining is the cheapest option for lining a bathhouse. However, you should not use pine clapboard to cover the steam room - pine gets very hot, which can cause burns.

Pine lining is quite suitable for a washing room where the temperature is not high. You can also upholster the dressing room with pine.

Selection of lining: classes A, B, Extra

How to decorate a bathhouse with clapboard with your own hands

If you wish, you can upholster the bathhouse with clapboard yourself. Below is a video created by comrades from Finland who know a lot about baths, or rather saunas.

Material for work:

• Laths for sheathing;
• Screws for fastening the sheathing. If the walls of the bathhouse are made of lightweight concrete (expanded clay blocks or aerated concrete), we recommend using screws for lightweight concrete Sormat KBRM, which have a nano coating, which will prevent them from rusting under the influence of increased moisture in the bath;
• Insulation;
• Aluminium foil;
• Aluminum tape for gluing foil joints;
• Lining;
• Nails (preferably from of stainless steel);
• Polyurethane foam;
• Staples for a construction gun.

Laying insulation and aluminum foil

As already mentioned, the video is in Finnish, but even without Russian translation everything is clear.

Ceiling and wall covering. Installation of lamps

On Russian-language sites they often say that the lining must be nailed vertically so that moisture does not accumulate in the locks of the lining. In relation to the sauna, this rule can be neglected, since the humidity in the sauna is less than in a Russian bath.

Please note that the lamp is positioned so that it is under the shelf.

Using foil foam and nailing the lining at an angle

To make the bath not just warm, but super-warm, instead of foil, you can use foil foam, which will turn the bath into an airtight thermos.

From the video you can see that the foil foam has a lock. Moreover, the connection of the sheets is foamed polyurethane foam, plus it is sealed with foil tape.

Lining is considered ideal solution for finishing the steam room, after all natural wood creates the necessary atmosphere and holds heat well. When planning clapboard cladding inside a bathhouse with your own hands, you should take everything into account necessary nuances. Even minor deviations from the rules threaten that the coating will not perform its functions and will quickly become unusable.

Covering a bathhouse with clapboard involves the use of materials that can withstand certain conditions that are typical for a given room. These include:

• High temperatures.
• Constant changes in humidity.
• Ingress of water and various substances.

Therefore, it is necessary to carefully select products. It is believed that the best option would be eurolining. This is due to the following factors:

1. Reliability of fixation due to large sizes groove systems.
2. The presence of compensation slots located on the reverse side. They prevent cracking of elements.
3. Good quality of impregnation with protective equipment, carried out directly in production.

Eurolining is the most reliable material for finishing a bath

On a note! For work, material of the first or highest class (grade) is used. There is no damage or knots that will fall out over time.

Selection of wood species

The bathhouse consists of several rooms that perform specific functions. It is advisable to provide for each room a certain type of wood. It must be borne in mind that not every type can be used for this type of finishing.

Linden

Linden is a frequently used lining option for finishing a bathhouse.

One of the most popular options. Linden is able to create a microclimate in the room that will be saturated with cleanliness and comfort. We must not forget about the excellent qualities of such material. The boards are durable, resistant to various influences, and retain their color and structure for a long time.

Aspen

The peculiarity of this type is that it only becomes stronger over time. This product is easy to work with. Even after a long time, when the wood darkens, it is enough to sand it to return the rich color of the surface.

The above options can be used in all parts of the bathhouse, but most often they are used in the steam room.

Aspen lining is most often used in steam rooms

Cedar

It can even be used in steam rooms, but this species heats up much more than deciduous ones, so at high temperatures discomfort from contact may occur.

Products made from cedar tend to get very hot

Pine and spruce

These types are used primarily for washing and dressing rooms. The fact is that these rocks intensely emit resin and heat up quickly. But it should be noted that this option is much cheaper than the previous ones and has a wide decorative range.

On a note! Coniferous species require additional processing - de-resining, otherwise there is a high probability that the surface of the walls and ceiling will be covered with numerous streaks.

Lining from coniferous varieties wood is most often used for finishing the dressing room and washing area

Choosing a mounting method

Do-it-yourself cladding of a bathhouse with clapboard begins with choosing a layout of elements. There are two main ways: horizontal and vertical. Each of them has its own advantages and disadvantages.

Horizontal option

Horizontal option has the following advantages:

• It is assumed that the fastening will be carried out with a spike at the top, which will reduce the likelihood of water entering and stagnating.
• This method is also good because the frame for it is made vertically, which means that the air will circulate more evenly in the resulting space.
• It also cannot be ruled out that boards, even the highest quality ones, are susceptible to rotting. This happens especially quickly at the very bottom. Horizontal fastening technology makes it possible to replace only the material that has actually been destroyed.
• With this installation option, drying out is less noticeable.

Horizontal mounting option for lining in a bathhouse

We must not forget that oak wood is considered one of the highest quality, but its cost is very high.

Vertical option

The interior finishing of a bathhouse with clapboards using the vertical method is done quite quickly and simply. This technology has its advantages:

• Any moisture flows faster down the vertical elements.
• The tongue-and-groove system is less susceptible to water stagnation and destruction.
• This circuit maintains the temperature inside the room.

Interior decoration of a bathhouse using a vertical method

It is believed that this option is most suitable for dry steam baths.

Installation of lining

Cladding with clapboard from the inside of a bathhouse or sauna is carried out on the sheathing. It is performed exclusively from wooden beam, which is pre-treated with various antiseptics and primed.

Important! You cannot use a metal profile for the frame; even galvanized versions in a steam room will quickly become unusable.

Creating a sheathing

The technology is as follows:

1. The timber is carefully prepared. For work, a non-planed version can be used, but it must be treated with impregnations.
2. The racks are fastened clearly perpendicular to the location of the lining. Naturally, if a combination of vertical and horizontal scheme, then it is necessary to calculate in advance the correct location of the beam.
3. The profile is attached to the wall with a dowel. It is taken into account that the size of the timber must be larger than the width of the insulation if an option is used that fits into free space.
4. The distance between the posts should be 50-60 cm. Correct fastening is checked by level and plumb.
5. If unevenness is detected, then additional board cuttings are placed. In the case of strong curvature, hangers are used for the frame of gypsum board slabs.

Installation of lathing in a bathhouse under the lining

On a note! Need to take care of high-quality ventilation. It is arranged in two places. The first hole should be located under the ceiling, the second - at a distance of 30 cm from the floor.

Fastening the slats

How to fix the lining in a bathhouse? Most in an effective way counts hidden mount(nails and clamps). There are several explanations for this:

• If you tighten the fastener through the front part, then there is a high probability of touching this place, which will lead to unpleasant sensations (a slight burn).
• The metal is susceptible to oxidation, which means stains may appear that spoil the entire decorative appearance.
• The visible fastening indicates that the master was in too much of a hurry to finish the work, neglecting the appearance of the room.

Installation of lining using hidden fasteners

The work proceeds as follows:

Stage one - covering the ceiling.

All events start with ceiling structure. The fact is that this is where the necessary thermal gaps are left.

1. Laying begins from the entrance to the room. A clamp is used as a fastener. It securely fixes each element, which cannot be said about nails.
2. The slats are placed at a distance of fifty millimeters from the walls, which will compensate for possible deformations. And it will also serve ventilation gap allowing air to circulate.
3. The first fragment is placed in its place and secured with hidden nails. Next, clamps are installed.
4. Products are grooved. Now only clamps are used.
5. The last element is difficult to install, so it is secured with hidden nails.

Stage two – working with the walls.

The technology exactly repeats that used for the ceiling. But the following is taken into account:

• The presence of capillaries in wood allows water to rise to a certain distance, and therefore it is advisable to leave a technical gap. To do this, 15-30 mm are removed from the floor.
• The boards are adjacent to the ceiling, but for walls the lamellas cannot be connected through the groove until they stop. The fact is that the tree is in constant movement, so there must be space.

It should be taken into account that violation of such simple rules leads to swelling and deformation.

Covering walls with clapboard requires following simple rules.

The technology used makes it possible to cover the bathhouse with clapboard in all rooms.

You should know! The lining cannot be placed next to the firebox and chimney pipe. But the area around the heater can be lined with hardwood slats.

Stage three – additional processing.

After installation is completed, carry out additional processing linings. This is necessary in order to protect the tree from destruction. Work in progress various impregnations on natural basis. Waxing is best - when the surface is thoroughly covered with wax. The number of layers depends on the type of room. One is enough for a steam room, and at least two for a washing room.

To protect the lining from destruction, additional processing is carried out

It is important to purchase high-quality impregnations that have the necessary certificates.

Everyone wants to know how to properly sheathe a bathhouse and save a little money. There are some options for this:

1. For each room you should select different wood. For example, the places in the steam room where you are supposed to lie or sit are lined with deciduous trees, the rest are cedar. The dressing room and washing area are decorated exclusively with coniferous options.
2. You can also lower the grade (class) of the lining. If other rooms need quality material, then the dressing room looks great with a surface on which there are traces of knots and different colors.
3. It is better to carry out all the work yourself. This will not only save you a lot of money cash, but also to be sure that all events are carried out with exceptional quality.

Bathhouse has unique property wash away accumulated fatigue along with the dirt. This is also facilitated by the special “natural” atmosphere. Natural materials, which are used to decorate the steam room and dressing room, when heated, release a woody aroma that helps to relax the entire human body.

Regular visits to the bathhouse are an excellent healing procedure that helps not only with the fight against excess weight, but also with a host of other diseases.

To have such a “hospital” on your own summer cottage it is possible for everyone, especially since building it and doing the interior decoration correctly, if you follow the instructions, will not be difficult for a person who knows how to hold a hammer in his hands.

Advantages

The only material for finishing the inside of a bathhouse is lining. No modern finishing options not suitable for extreme conditions steam room

Beautiful and inexpensive plastic will certainly withstand the high humidity of the steam room, but at high temperatures it melts and releases harmful substances. What kind of health are we talking about?

Natural lining– durable natural material, breathable, does not cause allergic reactions, has a beneficial effect on the human body.

It can easily withstand heat, and with proper treatment it can last for a long time in conditions high humidity. It has excellent soundproofing qualities and retains heat well.

Has an attractive appearance and allows you to sheathe the room both inside and outside. It can be used not only for cladding walls, but also for ceilings and floors. The boards are even and smooth; various communications or uneven surfaces can be hidden under them.

Installation does not require any special professional skills; anyone can do this job with their own hands.

If the board is damaged during operation and there is a need for replacement, dismantling and installing a new board can also be done without the help of specialists.

What is better for a bath

IN construction stores Many types of finishing materials have been proposed, and it is quite difficult to decide without knowing the characteristics of wood.

Each type of wood differs not only in cost, but also in characteristics. In addition, the lining is divided into classes.

Regardless of the class, it has the same processing, goes through all stages, and differs only in quality.

So, the “Extra” class is boards with a perfectly smooth surface without any defects. As the class decreases - A, B and C - the quality requirement also decreases. Knots and small holes may appear.

In the lowest and, accordingly, the cheapest class “C”, the holes can be through. Such boards are not suitable for finishing premises. It is optimal to use “extra” or “A” class.

As for the type of wood, here you can proceed from your own preferences and financial capabilities.

• Aspen. Durable, rot-resistant. Often used for lining baths. The disadvantage is the rather high cost.
• Linden. The most popular lining for finishing a steam room. It does not change its color over time, does not emit resin, and releases a pleasant aroma when heated. Linden does not heat up very much, so it is ideal for making canopies and seats.
• Ash resembles oak in its properties. It is massive, dense, durable, and has an unusual texture.
• Birch. Panels made from this wood are not suitable for cladding a steam room, as they tend to collapse when exposed to moisture.
• Oak. Heavy, massive, durable and very expensive. It has an incredibly beautiful wood texture.
• Larch has high density and strength, but is difficult to process and has low thermal insulation.
• Cedar. This tree has healing properties, when heated, releases a pleasant pine smell. Lightweight, attractive in appearance, durable. Among the disadvantages, it is worth noting the high cost.
• Pine is very often used in sauna lining, due to its low price and durability. Easily tolerates dampness. The disadvantage is that it changes color over time and releases resin when heated.
• Spruce. This wood retains heat perfectly, however, under the influence of moisture it tends to collapse.

Also see the comparison in the table:

Video - how to choose lining in a store:

Brief cladding technology

Is it necessary to sheathe the walls at all? If you have a log house made of logs or beams with a thickness of 20 cm or more, then there is no special need for cladding, since such thickness retains heat well. If the beams are thinner, then lining is recommended.

Many people think about how to properly cover a steam room with clapboard: vertically or horizontally.

Horizontal laying will visually expand small room Moreover, no water gets into the joints between the boards; the only condition is that it must be laid with the groove down.

If the boards closer to the floor begin to darken, then replacing just a few bottom slats is much easier than completely dismantling them.

The boards must “get used” to the room, so before you start work, let them “rest” for 1-2 days in the place where you are going to install them. To protect against mold and other microorganisms, all surfaces, including sheathing and lining on both sides, must be treated with a water-based antiseptic composition.

Before covering a bathhouse with clapboard, it is necessary to develop an action plan and determine the order of work.

First, you will need to make lathing for all surfaces, then lay thermal insulation material. This is necessary so that the bath heats up quickly and cools down for a long time. In addition, a vapor barrier is required. This will protect the thermal insulation material from getting wet.

List of tools

As mentioned above, sheathing a bathhouse is not a difficult task, you just need to prepare the necessary tools:

• Beam for frame 40*50 mm. It may be uncouth, it will still not be visible, and such beams are much cheaper;
• Self-tapping screws for sheathing;
• Insulation. It is best to use mineral wool;
• Aluminum foil or a special vapor barrier;
• Scotch tape for attaching foil;
• Construction stapler and staples;
• Small nails or special clamps;
• Building level;
• Hammer;
• Drill or hammer drill;
• Screwdriver.

Frame installation

Before covering the bathhouse with clapboard, it is necessary to secure the lining. To do this, the beam is attached to the wall using self-tapping screws. If the walls are uneven, they can be secured using brackets. metal profiles under drywall.

Needed with building level determine a straight vertical line and install the sheathing beam directly along it.

You should start from the corner. Then, moving along the wall to another corner, in increments of 50-60 cm, install all subsequent slats in the same way as the first.

More tips:

1. The frame is installed on the ceiling in the same way as on the walls.
2. If you are going to mount it vertically, then install the sheathing bars perpendicular to it, that is, horizontally, starting from the floor.
3. Attach the sheathing to wooden surface you need galvanized self-tapping screws, for concrete - using dowels.

Mineral wool is the best thermal insulation option for a bath. it should be inserted tightly into the spaces between the beams, without forming gaps through which heat can escape.

The sheathing slats must be higher than the layer of wool so that after installation of the lining an air gap will form.

Don't forget about safety rules. When working with insulation, wear a respiratory mask and safety glasses. Fine dust from it irritates the mucous membranes.

Sheets vapor barrier material should be laid starting from the bottom, overlapping each other and securing with special tape and a stapler.

Video - this is how the process goes:

A few steps and installation is complete

Start installing the lining from the bottom, with the groove down, or vertically, starting from one of the corners.

For fastening, you can use small nails, pointing the lining into the lock at an angle. Then their hats will be invisible.

You can also use special clamps. They are easy to use and the risk of damaging the surface with a hammer is reduced to zero. The next board is inserted into the first and, using a small piece of clapboard and a hammer, is driven in more tightly. Fill the entire perimeter in this way.

Video - :

Such work can be done quite simply and with your own hands, especially since this way you can save a lot of money. For example, how much does it cost to line a bathhouse with clapboard if you entrust the work to specialists? On average across the country, professionals (and non-professionals) will charge from 300 rubles per sq. m. m. Add also the cost of materials.

The interior decoration of a bathhouse, especially a steam room, is one of the most important elements of the interior. The most popular material for this is considered to be lining, the use of which will allow you to achieve optimal combination appearance and high performance characteristics material.

Quite a long time ago, a range of wood species was determined, which, as a rule, are used in the interior decoration of a bathhouse:

• Linden. Along with aspen, it is the most popular material used for bath interiors. It is highly resistant to moisture, preserving the color and structure of the material. In addition, it has characteristics due to which linden is used in the manufacture of benches, ladles, shelves used in the bathhouse, as well as doors to the steam room.
• Aspen. Soft and pliable material with equally high resistance to water and steam. Special attention It is necessary to pay attention to proper drying of aspen, after which its density and strength significantly increases.
• Cedar. The most expensive of the materials used in finishing. Linden and aspen heat up less and do not emit resins like pine, which prevents skin burns.
• Pine. Cheap option coniferous wood, rarely used in a steam room, and much more often in a dressing room or relaxation room.

Definition of technology

In fact, the cladding technology is almost always the same. Unless there are two options for the arrangement of the lining - vertical and horizontal.

In most cases, the second method is used, since it is more convenient in production. finishing works and operation.

Execution of work

Sheathing device

A timber with a thickness slightly greater than that of the insulation used is used (as a rule, it is used as a heat-insulating material mineral wool). It is installed perpendicular to the selected direction of the lining in increments of approximately 45-55 cm. If the walls are uneven of significant size, it is necessary to use pads made of the same type of wood or some material of sufficient density. The sheathing is attached to the wall with screws and dowels made of plastic or self-tapping screws made of galvanized metal.

Laying insulation

In most cases, as mentioned above, mineral wool is used, available on the market in the most various types and modifications. The main rule for laying insulation is that there are no gaps between the materials to avoid the formation of cold bridges.

Video instruction:

Sometimes mineral wool is not installed at all - if there is no need for additional insulation, and the sheathing is done only to secure the lining.

Vapor barrier device

Can be used glassine, roofing felt or simple polyethylene film. The strips are fastened with a stapler for furniture works with a mandatory overlap of at least 5-7 cm. For greater reliability, the joints are additionally sealed with adhesive tape or tape, as wide as possible.

Ventilation device

A favorable microclimate in a bathhouse largely depends on proper operation ventilation. For its normal functioning, when installing insulation, it is necessary to provide ventilation holes.

Installation of lining on the walls of the steam room

Fastening must be done using a hidden method, using self-tapping screws, clamps or nails.

This is necessary in order to:

• avoid the possibility of contact with heated hardware;
• prevent it from coming into contact with steam or water, and as a result, prevent corrosion, which can ruin the surface of the lining

Coating bath walls from clapboard

Standard technology is used, during the production of which the following points must be taken into account.

• The lining is fastened with self-tapping screws made of galvanized steel into a tenon, and the holes must first be drilled to avoid chipping. It is allowed to use fastening with nails or clamps (special staples for wood).
• The coating device starts from the corner, access to which is most difficult. This is explained by the fact that the last board will need to be adjusted both in length and width, which is almost impossible to do if there is insufficient access to the place of its installation.

• Corners are finished using wooden plinth, which is secured with stainless steel nails.
• We should not forget that everything wooden structures must be treated with an antiseptic composition.

Installation of a ceiling covering for a steam room made of lining

The installation of a lining ceiling covering, as a rule, starts from the entrance. Only clamps or nails are used for fastening. This is due to a fairly serious load from the mass of the material. When installing last boards A secret nail without a head is used, which is driven in using a hammer. To give a pleasant appearance, the place where this nail is driven is treated with sandpaper. It is necessary to take into account the need to leave a gap of 4-5 cm between the ends of the lining and the wall of the bathhouse for normal ventilation. In addition, it is necessary to provide the structure with the opportunity to “play”, since the temperature under the ceiling will be the highest.

Correct gap between boards

The coating looks most attractive when all joints are made of the same type.

This can be easily achieved by marking the boards when installing them, and also using a level to ensure that the boards are level or vertical. The wall covering must be closely adjacent to the ceiling covering.

Covering door and window slopes with clapboard

When finishing doors, you must first prepare the boards required length. Doorways are trimmed with platbands.

Advantages of using lining

• Versatility (can be used on any structure - floor, wall, ceiling);
• Relatively long service life;
• High aesthetic qualities. Lining, like no other material, allows you to preserve the spirit of the bathhouse, which is associated, first of all, with wood and wooden materials;

• Protection of finished structures from high humidity and reduction of heat loss.
• In order to answer the question of how to line a bathhouse with clapboard with your own hands, you need to clearly and consistently go through next steps: Material selection
• Definition of technology
• Execution of work

Comments: 0

The bathhouse is a very ancient healing procedure beloved by our people. It perfectly improves the tone of the body, promotes the removal of toxins, hardens, and helps get rid of many diseases. But the maximum healing effect can be achieved with the right decision, what kind of clapboard to cover a bathhouse if your bathhouse is made according to all the rules and from natural materials.

What clapboard to cover the inside of the bathhouse

The most the best options For interior decoration Saunas or baths are usually considered to be lining made of oak, linden or aspen. The use of lining made from these materials will provide excellent heat and soundproofing properties, these types of wood do not release resin when heated, they help create a special microclimate in the steam room, and they release the healing substances themselves. Before deciding which clapboard to cover the bathhouse, you need to decide on the choice of material.

The lining is attached to the walls and ceiling in the bathhouse, provided that they are wooden and smooth, and if you built a bathhouse from brick, then you need to make a special sheathing of slats for the lining. After you have secured the lining, you should impregnate it. To treat lining in a bathhouse, you can use varnish and special environmentally friendly antiseptics - this is necessary to protect the wood from moisture. What clapboard to cover a bathhouse, how to treat it, how to care for it - knowing the answers to these questions will help you significantly extend its service life.

In order for your sauna or bathhouse finish to last a long time, you need to correctly select one of the options for attaching the lining and have it processed protective equipment. Most often, the lining in a bathhouse or sauna is mounted vertically. With this method of fastening, water flows freely down the walls and does not linger in the grooves of the slats, which often happens if the lining is fixed horizontally.
Doing the finishing bath room, materials can be combined. For example, forty centimeters (lower level) from the floor level can be faced with ceramic tiles, and the walls above can be made of lining.

The modern market offers a very large selection of wood lining, but you should follow the rules when choosing it:

— For interior decoration, it is necessary to use lining, the cut of which is along the growth of the tree.
— The edges of the surface must be free of cracks.
— The vanonka should be free of stains and knots.
— If such defects are present, the lining may break during fastening.

For the interior decoration of the bathhouse, it is possible to use various wood species. Let's get acquainted with those that are used for this purpose most often:
Using alder to decorate a bath
Black alder is an excellent raw material for producing lining according to European standards. She has wonderful medicinal properties. It is often used in the construction and interior decoration of baths or saunas. The healing properties of this wood are associated with the presence of special tannins in it, which have a number of valuable qualities:
— When heated, these substances have an anti-inflammatory and hemostatic effect.
— They have disinfectant and astringent properties.
- Helps with colds, gout and rheumatism.
For interior decoration, it is better to use eurolining, which is made from material harvested in the fall or winter. This lining enhances the healing properties. It is believed that alder is one of the best materials for interior decoration.

Cedar lining

Cedar is recognized as a valuable material, which, in addition to High Quality It also has a very beautiful texture. There are cedar species that high temperature acquire pink tint and releases cedar resin. Except pleasant aroma cedar also has antiseptic properties.

Aspen paneling

It is often said that aspen is a dead tree, but when choosing aspen lining, you should remember that it is more often susceptible to tree diseases than other materials. In the absence of a special coating with a protective liquid, such lining will darken over time. This soft material, which is easy to process, has no odor and a beautiful texture.

Linden for lining

Linden has many wonderful properties. It holds the temperature perfectly and can be considered the best material for interior decoration of the bath. There is no resin in the linden lining. This material is light, less often has a coffee tint.