To get real pleasure from staying in the bathhouse, you need to choose the right stove that will create the right heat, and will also be distinguished by reliability and durability. Progress does not stand still, and along with the usual models of bath stoves, modernized devices of a new generation are appearing.

One of the most famous Russian manufacturers stoves for baths is the Termofor company. Let's find out what characteristics products from this manufacturer have.

Peculiarities

The company produces various models ovens that are combined general characteristics. Bath stoves can be used in conditions harsh winter and hot summer. Properly designed devices create pleasant, soft steam and the temperature required for a bath, while only high-quality materials are used to create each model.

Wood and gas units They have a refined and laconic appearance, so they will fit perfectly into any interior. Thus, these products combine classical and innovative methods of creating stoves.

The fireboxes are made of heat-resistant chromium steel, previously actively used in the aviation industry. This material allows you to retain heat for a long time and significantly increases the efficiency of a wood-burning stove. Scale in such a stove is formed only when the temperature reaches 750 degrees, which means that the wood burns practically without oxidation, and oxygen does not burn out in the steam room.

The stoves are equipped with a double combustion system, thanks to which the required temperature is quickly established in the steam room. To properly warm up a bathhouse, a stove from a Russian company requires about an hour, but in the summer 30 minutes is enough.

The unit consists of an impressively sized closed or pyramidal open heater, a thin-walled firebox, a heat exchanger or tank, and a convector. Depending on the model, the oven can hold from 25 to 100 kilograms of stones, which, by the way, are heated from five sides at once. Some devices allow you to control the temperature in the firebox remotely, which is possible thanks to an external fuel channel.

They are also equipped with a self-cooling safety door. The line of products produced by the company includes models with heat-resistant glass, which allows you to enjoy the beauty of fire.

Bath stoves are suitable for rooms with a volume of 4 to 24 cubic meters. Moreover, regardless of the specific model, the units not only fill the steam room with heat, but can also heat water and create a soft quality steam. Water tank from of stainless steel can be installed in the center of the stove or built into the heat exchanger.

It's interesting that when correct operation The water in the container does not boil, but only warms up to 90 degrees.

Correct choice of model

The company produces economy, medium and premium class stoves. The company produces very miniature products, for example, the Osa wood-burning stove, which weighs only 30 kilograms and is designed for a room with a volume of 3 to 9 cubic meters. The economy class category also includes “Compact” stoves, created for small steam rooms, as well as home baths combined with a shower.

For owners standard premises The “Angara” model was designed with a double compartment for stones and an impressive transparent screen. The unit weighs about 65 kilograms, and it can hold up to 60 kilograms of stones. The premium wood-burning sauna stove "Kalina" is equipped with a large fireplace, which makes it possible to monitor the fire under different angles, as well as a built-in heat exchanger with a remote tank. In addition, the powerful device has stylish design and refined appearance.

The Termofor company today is considered a leader among domestic producers stoves for steam rooms and heating devices intended for oversized rooms. When choosing a Termofor stove, you can take advantage of a wide range of models presented in relevant stores. Among the main advantages of this product are functionality, versatility and complete safety of operation.

general description

When choosing a Termofor stove, you should know that these products are represented by a number of model lines, and among their main advantages are durability, reliability, safety, ease of use, modern design, affordable cost and permissible installation in any room. Each model differs in design features, dimensions and power, which manifest themselves in certain conditions. Stoves designed for baths are installed not only in family steam rooms, but also in commercial saunas, which have a significant area. If we compare with domestic brands, then the described products have more compact dimensions, are characterized by fuel efficiency and unique attractive design. Such equipment is even used for heating country houses, garages, hangars, small-sized residential buildings, as well as absolutely any premises that have a small area.

Product range

If you decide to purchase a Termofor stove, you can choose one of the colors on sale, namely: terracotta, anthracite, chocolate, which allows the device to fit most harmoniously into any interior. Thanks to the presence of elongated combustion chamber channels, it is possible to carry out combustion from an adjacent room, thereby increasing the heated area. If you decide to buy a Termofor stove, then it is worth considering that consumers most often choose those models that are equipped with doors made of heat-resistant glass. Such options are so in demand today for the reason that the equipment has the form modern fireplace. At the same time, the channel itself does not heat up, so, if necessary, it can be routed through any wall.

Consumer reviews about the Geyser model

If you are considering Termofor sauna stoves, reviews of which you can read below, then you need to take into account the fact that each model has its own characteristics. One of the consumers notes that he had a bathhouse on his site in which a large one was installed. They decided to replace it due to failure, installing the “Geyser” model in the steam room, the dimensions of which are 3 x 4 meters. The structure was installed on the foundation of the old device, while the gas duct was led into the chimney. In this case, the room can be heated in 1 hour, and the walls of the niche retain the ability to effectively retain heat for a long time. With such a stove, the room will become more comfortable and spacious.

Reviews about the Angara model

When considering Termofor sauna stoves, reviews of which you should definitely read before purchasing equipment, you should pay attention to the model produced by the manufacturer under the name “Angara”. Such a device, according to consumers, can last quite a long time. If there is a need to install a tank with a capacity of 50 liters, then the water will not heat up much. In order to achieve a temperature in the stove within 80 degrees, you will have to heat it for quite a long time. At the same time, the temperature in the steam room will remain high. The tank must be installed above the heater, then the water will heat up faster.

Customer reviews about Kalina models

Termofor sauna stoves have become quite popular among modern buyers. If there is a need for a fairly powerful stove, then you should prefer the Kalina model. It can be lined with brick, providing a gap of 100 millimeters. It will be able to retain heat for 6 or 8 hours straight. Such equipment will be multifunctional, because in the steam room you can not only wash, but also dry clothes in winter period. This approach can be considered practical and economical.

Reviews of "Cinderella"

If you decide to purchase a Termofor stove for your home, then the option called “Cinderella” would be an excellent solution. The firebox of this equipment can be installed by the master or home owner in the kitchen, while the stove itself can be installed in the living room. As fuel in autumn period You can use dead wood, dry shoots of bushes, paper, as well as anything that burns well and does not involve the need to purchase. During the winter you will need to use thicker firewood. Owners of country and private houses, the latter of which are located within the city, believe that the “Cinderella” model is considered a fairly convenient option to use. This solution is low cost and fairly compact in size. The equipment is unpretentious in the use of fuel.

Termofor stoves, reviews of which you will read in the article, must be used for their intended purpose. For example, if there is a need to equip a commercial sauna, then you should not use equipment for a family bath. This is due to the fact that such a device is not suitable for round-the-clock operation, and also will not allow receiving sufficient quantity heat. The durability of the device will depend on the operating mode. Experienced craftsmen It is not recommended under any circumstances to carry out manipulations to shorten the gas duct. After all, with a short length, it will not have time to heat up to the required temperature, and condensation will begin to collect at the outlet, which is completely undesirable.

The most popular series of the Termofor brand

Wood-burning stoves “Thermofor” of the “Geyser” brand can be classified as an expert model class. Such equipment is intended for saunas and baths, which have an impressive area. The design has a two-level system that simultaneously heats the room and produces light dry steam. The body has a funnel where you can pour water if necessary. This will prevent drops from falling onto the surface of hot stones. As bathhouse lovers emphasize, this model is excellent for a Russian steam room, as well as a classic dry sauna.

If you decide to buy a Termofor sauna stove, reviews of which will be useful to read first, then you can turn your attention to the Angara model, which is used for family steam rooms and commercial baths. In the latter case, it is necessary to pay attention to the fact that for of this device 24-hour operation is not suitable, since with such operation the equipment will quickly fail. The design has two chambers with a chimney, which allows you to maintain a constant temperature at the required level.

The durability and unsurpassed reliability of the model are due to the durable body, which is made of heat-resistant steel, as well as cast iron. If you are interested in the Termofor heating stove, then you should pay attention to the Kalina model. It is capable of heating 100 kg of stones in a short time. The structure can be used as a fireplace or stove, which is equipped with a water tank. The volume of the latter can reach 70 liters. The design has a gas duct that has a unique labyrinth shape. Due to this, the room heats up quickly enough, which indicates efficiency.

Ovens "Compact"

Wood-burning stoves "Thermofor" of the "Compact" line belong to the economy class. This equipment has the most optimal ratio of quality and cost. Such devices are suitable for individual use. All varieties of this line are made using alloyed heat-resistant steel, which contains a certain amount of chromium. This eliminates the occurrence of scale. The economical model creates enough comfortable conditions. The dimensions of the latter can vary from 6 to 12 cubic meters.

Characteristics of the fire-battery stove

Considering for your country house Termofor stoves, it is definitely recommended to read the reviews. The latest metalworking technologies, as well as computer methods design made it possible to produce a truly unique stove, which is called a fire-battery. The design is distinguished by an impressive firebox volume, the presence of a heat exchanger, a hob, and an external type. I must admit hob is the most significant advantage in everyday life.

Main characteristics of some models

If you choose a Termofor stove for your home or steam room, then you need to consider the main quality characteristics some solutions. For example, “Geyser” is capable of heating a room whose dimensions can vary from 8 to 18 cubic meters. The mass of the stones is 60 kilograms. During operation, you can use firewood whose length reaches 450 millimeters. You can purchase such a model for a price that starts from 16,000 and ends at 20,000 rubles.

“Angara” heats a room of the same volume, but the volume of stones is 10 kilograms less. The length of the firewood has been increased to 500 millimeters, and the cost starts from 10,000 and ends at 20,300 rubles. The Compact stove is purchased for smaller rooms, which are limited to 6-12 cubic meters. The weight of the stones does not exceed 35 kg, and the cost varies from 7,500 to 11,700 rubles. The Kalina stove can be purchased for rooms whose minimum volume is 12, while the maximum is 30 cubic meters. It can hold 100 kilograms of stones, and the cost is perhaps the most impressive, it starts from 26,500 rubles and ends at 30,000 rubles.

The Cinderella stove can be installed in rooms with a volume of up to 50 cubic meters. Its cost can be equal to the limit from 6200 to 7400 rubles. The battery fire can be installed in a room that reaches 250 cubic meters. The minimum figure is 100 cubic meters. The cost of such equipment varies from 9,400 to 17,500 rubles.

Installation features

Termofor sauna stoves must be installed using a certain technology. It is important to consider the distance between flammable objects and the stove structure. It should be approximately 125 cm. If the device is located inside wooden bath, you need to additionally protect the walls using a heat-repellent screen. Its area should be more area opening for inserting the stove 2 times. To install the structure, you need to use a base made of non-combustible materials, this can be a metal sheet or The first one should be covered with a thermal insulating base or tile. Installation of the Termofor stove involves providing space between the wall of the bathhouse and outer wall equipment. It should be 26 cm. Place it on the floor in front of the door. thermal insulation material, which is covered with a sheet of metal. If you are going to install the structure in the right corner from entrance doors, the door should open to the left.

Conclusion

The chimney is carefully insulated special material, which is able to withstand high temperatures. This is required to prevent condensation from accumulating. Moisture can cause a lot of trouble, and the material will be constantly exposed to aggressive influences, which can contribute to the destruction of structural elements. That is why the durability of the entire product depends on correct installation. The first firing of the furnace should be carried out in open sauna. This will quickly get rid of the smell of burning oil residues. These recommendations are definitely worth considering if you want to enjoy real steam for the first time.

“The fire beats in a small stove”... This famous line has not lost its relevance today. We still need a stove to heat our home. But the stove of our days is by no means a “cramped” shelter for the flame. Efficient, hot, powerful modern design models - perfect solution for a room or home that requires heating.

Today, the most popular boiler-heater market is the lineup air heating furnaces Termofor Professor Butakov. One of the most popular among them is the highly effective independent model Termofor Professor Butakov “Student”.

“Student” has modifications - a wood boiler and a coal boiler. Both of them can work on fuel briquettes for heaters closed type, peat briquettes and pellets.

Purpose and general description

Designed for uniform and economical heating of residential, utility and industrial premises total volume up to 150 m3.

Thanks to design features- flat horizontal surface - has increased functionality and provides full cooking capabilities.

For maximum convenient installation and installation, as well as compliance with fire safety standards, the boiler has modifications depending on the design of the outlet chimney. The flue pipe can be installed vertically at the top of the housing or on the rear panel of the housing, providing a horizontal smoke exhaust to the rear.

Heating is carried out due to gas generation, which occurs in the firebox as a result of smoldering wood or coal. The smoldering process is the main operating mode of the furnace. Normal operating conditions solid fuel stove is temperature Range air -60…+40°C. The hot air exits through the holes in the side pipes located on the sides and upper plane of the stove.

The outer surfaces are covered with heat-resistant protective silicone enamel KO-868.

The boiler is equipped with a stable base plate with mounting holes for reliable fixation to the floor in a heated room.

Design and technical characteristics

The Student stove has a modern design and is made of special technical steel up to 3 mm thick.

Inside there are convector pipes that surround the combustion chamber. Top part The firebox is equipped with gas guide screens. A system of convective pipes and gas guide screens ensures maximum heat transfer during fuel combustion and gas removal.

To maintain the combustion process (smoldering) and the flow of additional air into the furnace, there are jets curved from bottom to top towards the air flow.

The sealed cast iron/metal door of the combustion chamber with a translucent screen (or blind) is mounted on hinges. The firebox door has a maximum opening angle of up to 120°C. The door locking mechanism secures the door firmly when closed by turning the handle. Reliable fixation ensures complete combustion, heat transfer, and fire safety. A convector panel is attached to the door, accelerating the heating of the air in the heated room.

The grate bars are made in the form of grooves. The grate is located at the bottom of the firebox and promotes forced combustion and achievement of high temperature flame at the moment of ignition of the stove. The sealed ash pan can be equipped with an air damper, which additionally regulates the air supply to the firebox.

Through the grate slits, combustion products (ash) move into a retractable ash drawer. The retractable ash pan system ensures cleaning of the fuel chamber without stopping combustion.

The boiler smoke channels are equipped with a damper to distribute the gas supply and for fire safety purposes.

Terms of use and operation

To initially light a fire and start the stove, you need to fill the chamber halfway with fuel and light the fire, observing safety precautions. Heating should be carried out for 1 hour, preferably outdoors.

To ignite the boiler, fuel is loaded into the fuel chamber, depending on the modification of the boiler. For ignition and maintenance of the combustion process, it is necessary to ensure access of primary air through a covered ash pan and grate to the firebox. Secondary air, which provides afterburning, enters through jets.

To ensure the intensity of ignition, the ash pan extends. To ensure an economical combustion mode and gas generation, the ash pan is retracted and the gate is closed. If the stove is equipped with a sealed ash box, it is closed as tightly as possible with a lock. In this case, air is supplied using an air damper. In other cases, the ash pan does not slide in tightly, with a gap of up to 5 mm.

Gases released as a result of combustion are discharged through a pipe combined with a damper and placed on the rear or upper wall of the furnace. Since the air-heating boiler is designed to operate exclusively in gas generation mode, it is prohibited to operate it with the firebox door open and/or an open flame.

To add fuel, you need to open the combustion chamber door. Before this, be sure to open the gate and close the ash drawer. After 5 minutes of this mode, open the door and add fuel. When cleaning from combustion products, it is better to leave a little ash on the grate inside the gutters. In this case, the ash is a natural thermal insulation, increasing the service life of the grate.

Advantages and disadvantages

Being a practical and functional product, the solid fuel air heating boiler Termofor Professor Butakov “Student” also has a number of disadvantages. These include the need to install the stove higher than 140 mm from the floor or ceiling level, if they are made of flammable materials. It is also possible for the boiler to become very hot until the heat-transfer surfaces become incandescent. Ash and slag must be watered before removal from the firebox. Moreover, in conditions negative temperatures Reinforced thermal insulation of chimneys is required.

Nevertheless, “Student” also has undeniable advantages. Among them we can note an increased area of ​​heating surfaces, increased heat transfer and air cooling boiler A functional firebox with a combustion and air supply control system ensures long-lasting and uniform heating, which allows you to not only heat up, but even cook food on such a stove.

Free entry and exchange warm air in a heated room is carried out due to the special geometry of the heat exchange pipes. The durability and reliability of the components is ensured thanks to a replaceable grate and a retractable ash pan. The boiler design also provides for additional equipment that increases heat transfer and efficiency.

Having decided buy a heating stove Termofor Professor Butakov “Student” in conditions of shortage of energy resources such as gas and electricity, it is the optimal solution for heating and heating. It is economical, highly efficient, functional and convenient device long-term heating with increased heat transfer. It can be used in almost any conditions. The Student stove is a reliable and warm friend.

Termofor sauna stoves were presented at Russian market for quite some time now. This company was one of the first in the country to begin producing both home and modern, reliable sauna stoves made of stainless steel. Today we will look at the model range and specifications stoves from the Termofor company with a heat exchanger and a water tank.

We will also analyze their design, design features and water connections using the example of the Tunguska bathhouse stove, which has the most frequent customer reviews.

Model range of Termofor brand sauna stoves

Termofor sauna stoves are available in different options execution. Buyers are provided with enough wide choose both in price, and in terms of the heated volume of the steam room, and in terms of the design and dimensions of the heater stove from the Novosibirsk company “Termofor”.

1. Tunguska stove: Vitra, XXL, XXL Vitra.
2. Heater stoves “Angara” and “Angara 2012”.
3. Stove-fireplace for baths “Kalina” and “Geyser 2014”.
4. Budget sauna stoves “Compact” and “Shilka”.

In stores we can find inexpensive models for a small steam room of 10-12 m3 - “Compact” or “Shilka” with a built-in tank for heating water located behind the stove.

Bath stoves Termofor

The Kalina and Angara 2012 heater stoves, which have a “fireplace effect” thanks to their large panoramic heat-resistant glass, have good reviews. Such sauna stoves-fireplaces can not only heat a large steam room of up to 25-30 m3, but also an adjacent room, for example, a dressing room, a washing room or a relaxation room.

But the Tunguska series models still gained the greatest popularity among consumers, due to their optimal set of functions and good price-quality ratio. We will analyze them in more detail.

Design features of the Tunguska bathhouse stove

The classic Tunguska sauna stove is capable of heating a steam room with a volume of up to 16 m3. Like all Termofor brand stoves, the firebox of the Tunguska model stove is made of heat-resistant stainless steel with a chromium content of 13%.

The branded steel door without glass has the property of self-cooling with its outside. Due to the deep structure of the heater, it heats up evenly on all four sides. Let's look at the design diagram of the classic Tunguska sauna stove:

The internal structure of a Termofor brand sauna stove

1 - chimney
2 - convector
3 — remote channel for fuel
4 - steel door
5 - ash pan
6 - stones
7 — enlarged heater
8 - firebox
9 — cast iron grate

All models are equipped with a cast iron grate, which creates a good flame under the bottom layer of firewood. The convector of the stove-heater screens infrared radiation and produces a stream of hot air, evenly distributing it throughout the entire volume of the steam room.

In addition, models of the “ Tunguska XXL"have an elongated combustion chamber, which makes it possible to use logs more than 50 cm long as fuel. And the heater itself is larger than that of the classic Tunguska.

Series models Vitra" And " Vitra XXL» are intended for baths with a steam room volume of up to 24 m3. These stoves have a door with heat-resistant glass of SCHOTT ROBAX technology and a porthole measuring 17.5′, which allows us to visually enjoy a live fire while being in the room adjacent to the steam room.

Tunguska sauna stove with heat exchanger

All Termofor heater stoves are designed not only for heating the steam room itself, but also for obtaining hot water. This water is heated in a tank, which can be located:

- on the chimney pipe (“samovar” type);
— on the wall (remote tank).

The water in the remote tank is heated by a heat exchanger, which can be located either on the chimney pipe section, or installed under the outer lining (convector) of the heater itself.

The heat exchanger for the chimney must be purchased separately, and preferably made of stainless steel. But you don’t have to do this, but simply buy a stove for a Tunguska bathhouse with a heat exchanger, which is already built into the stove on the side. Let's look at the connection diagram for a sauna stove with a built-in heat exchanger.

Connection diagram for the Termofor stove with heat exchanger

1 - chimney pipe
2 - heat exchanger made of stainless steel
3 — stove-heater
4 — remote tank cover
5 - water tank
6 - ball valve for hot water selection
7 - three-way valve
8 - pipes for natural circulation water
9 - drain valve

This heat exchanger is a flat tank of small volume having two threaded fittings with a diameter of 3/4′. The Tunguska stove with a heat exchanger has a universal connection from both the left and the right side, by moving the heat exchanger to any convenient side.

An important point is that this stove can be lit not only with water in the jacket, but also without it. This is explained by the fact that the water heat exchanger is not soldered into the structure of the stove itself, and heating in it occurs only through the contact walls of the water jacket and the heater.

The water is heated in a heat exchanger when the heater is lit. In this case, the stove should be located at the lowest point of the steam room, and the remote tank should be at a height of 2 - 2.5 meters from the floor. Heating of water in the circuit and tank is achieved through natural circulation.

If the tank does not hang at an insufficient height, this circulation may not exist, and, accordingly, the water in the tank will not heat up well or will not heat up at all.

Water is connected to the heat exchanger using steel water pipes or stainless steel pipes, as well as fittings. To simplify the installation of the Tunguska stove, instead of pipes, flexible stainless steel pipes are used. union nuts 3/4′ diameter and corresponding length.

Tunguska stove: technical characteristics, dimensions

Technical characteristics of Tunguska stoves

Advantages of the Termofor Tunguska sauna stove

— wide model range;
— the furnace body is made of stainless steel with a chromium content of 13%;
— quick heating of the steam room;
— light weight of the stove;
— reliability;
— universal installation heat exchanger.

Disadvantages of Termofor sauna stoves

- high price;
— lack of stainless steel stoves with a steel thickness of more than 3 mm in the range.

Customer reviews of the Termofor sauna stove are mostly positive. This can be easily explained, for the advantages of this stove clearly outweigh its disadvantages. If you decide to buy a sauna stove from the Termofor company, you will receive a lightweight, reliable and modern heating unit, which should serve you for many years. Let's watch the video review.

Peculiarities

The NORMAL TURBO stove is characterized by the following features:
The large sealed firebox of the NORMAL TURBO stove allows you to effectively use the stove in long burning. Special channels supply hot air for afterburning of exhaust gases. Side panels remove convection heat from the oven walls and shield the infrared radiation emanating from them. The upper horizontal surface can accommodate several units of dishes at once. The replaceable cast iron grate of the NORMAL TURBO stove ensures uniform combustion and allows you to sharply speed up combustion to quickly raise the temperature or dry out the fuel. The retractable ash drawer allows you to remove ash in one movement without interrupting the combustion. The built-in convective heat exchange pipes of the NORMAL TURBO furnace increase the total area of ​​the furnace heating surfaces by 80%. Forced pressurization increases the speed of air passage through the heat exchange pipes several times
.
Series of ovens PROFESSOR BUTAKOV. An interesting series - the brainchild of domestic engineers. “Butakovs” have an attractive appearance and consistently outperform their peers. The manufacturer achieved greater heat transfer per unit surface of the furnace by enlarging the convection pipes and integrating them more efficiently into the structure. In this series, the pipe connection pipe is more conveniently located - at the top. The condensate therefore flows directly into the furnace, where it burns without leaving a residue. The PROFESSOR BUTAKOV range of stoves also includes several standard sizes of products designed for heating rooms of different sizes. 5 PROFESSOR BUTAKOV stoves are serially produced for heating premises with a maximum volume from 150 to 1200 m3 and a nominal power from 9 to 55 kW, respectively. Models differ overall dimensions, weight, volume of the combustion chamber, maximum volume of fuel loaded at a time, diagonal of the combustion door opening, diameter and number of convective pipes, total cross-section of the passage of heated air, total area of ​​heating surfaces, diameter and height of the chimney.

ATTENTION! The choice of boiler model is of paramount importance when organizing air heating and requires substantive consultation with a qualified specialist.

The number 7 in the stove model designation corresponds to the number of pairs of slot convectors with which the stove is equipped or the number of slot convectors visible on one side. That is, the power of the furnace increases in the same way as with water heating batteries - by increasing the number of sections. The letter index “B” denotes a modification of the furnace with a built-in heat exchanger tank.

Price lists

Quick access to prices for the entire range of Pechki-Lavochki products.