Polycarbonate Sheets - Amazing universal remedy in the construction and design of the most various designs and buildings. There is more than one bright photo an example of greenhouses, porches, design of stairs, canopies and other additions made from this material. It has a lot of enviable advantages, which, along with a large number of colors, make the material the most popular among all.

Advantages

It would be stupid not to describe the main positive traits material, especially since they are a fairly weighty argument in its favor. So let's get started:

1. Polycarbonate does not support combustion. And this is important, especially for a private house, in which Fire safety at the first place.
2. The material perfectly transmits light, which means that after rain there will be no stagnation of water on the porch.
3. Polycarbonate is quite flexible. This allows you to show more imagination in the design of the porch. Take a look at the photo; you can see the domed canopies over the porch and the curved spans in the railings.
4. The stability of this polymer is high. It does not crack at low temperatures and holds its shape well at high temperatures. The coefficient of linear expansion is not too high; for example, when laying sheets, a gap of 3 mm will be quite sufficient.
5. Its strength is indicated by its ability to withstand mechanical stress; the force can reach up to 500 kJ. Polycarbonate does not wear out over time, it is not afraid of constant contact with sunlight and precipitation.
6. Aesthetics - important nuance for any porch, especially in a private house. The porch to the house made of polycarbonate can be of various types color solutions, because the material goes to various shades. At the same time, even over a long time, the color does not wash off or fade.

Kinds

More important point. Making the porch of a private house from polycarbonate is good, but it is also important to choose the right material. Accordingly, it is worth getting acquainted with its types, especially since there are only 2 of them.

• Cellular polycarbonate is a material that has hollow cells inside. Thanks to this design, several properties of the material are achieved: bending strength, heat retention, and lightness of the sheet. All these features significantly increase the popularity of polycarbonate in comparison with glass, wood, and slate.

• Monolithic polycarbonate has the main difference from cellular polycarbonate - an integral structure. It is smooth, quite dense and in cross-section it is a dense polymer. Its texture is smooth, it is no different in terms of strength, and the color range is also diverse.

From color monolithic polycarbonate It’s good to make various decorative elements in the design of the porch. These may be the most different designs, ideas.

It’s not difficult to make a polycarbonate porch with your own hands, especially since there are a lot of photos, videos, lessons, instructions and much more that will allow you to perfectly decorate the front entrance to the house, make it unusual, bright, and emphasize individuality.

Examples

Can be done interesting design in the form of a “gingerbread house”. For this you will need polycarbonate different colors. You can design the spans in the railings in the form of chocolate bars. Make the visor from two sheets of bright red and bright green. This will be a wonderful decoration that will give the porch a fabulous look. This option can be finished in a wide variety of colors. Racks made of profile pipes can also be painted in the color of caramels or chocolate sticks.

A more stylish, one might say, “high-tech” option would be using cellular polycarbonate and chrome pipes. A little imagination with shapes, and a do-it-yourself polycarbonate porch will be a delightful decoration of the facade.

The classic version of the porch can be designed using beige, golden or brownish polycarbonate along with forged elements. Slightly aged metal with bronze plating will be delightful along with noble shades of polymer.

The porch of a house made of polycarbonate, photo examples of which can be seen, is a clear confirmation that you can decorate your home yourself, make it more original and, by the way, functional. Why? Thanks to the most important property of polycarbonate - impermeability. Walking onto a porch made with this material even in severe bad weather, you can spend some time without getting wet in the rain or holding your umbrella because of a gust. strong wind. It’s not for nothing that they say that comfort begins with the porch. Therefore, it is very important that it is done wisely.

Simple steps

To make the space in front of the door more organized, you will need a little:

• budgeting and material selection;

• choosing the location where the work will be carried out
• preparation of instruments;
• organization of working hours;
• attentiveness.

The last point applies especially to sketches and drawings. Because it is extremely difficult to assemble a structure without a clear example.

So, to summarize, what can we conclude? Polycarbonate is a material that gives good opportunity for imagination and manifestation creativity. Even despite the initial difficulty, with calm and correct execution With the necessary manipulations, you can get an excellent result. Therefore, you should be patient, once again look through photo and video materials on the topic and begin to implement your plans.

The material for building a platform in front of the door to the house must be selected so that the entrance area is not only durable and safe, but also beautiful. A polycarbonate porch in a private house looks very impressive and modern. This option will reliably protect the hall and stairs from precipitation, and will also give the facade lightness and airiness.

The porch is an integral part of any country house or dachas. In addition to its functional load, it serves to decorate the home. Manufacture entrance groups from various materials, but in Lately Polycarbonate is becoming increasingly popular - a two-layer cellular plastic characterized by its excellent appearance, sufficient strength and ease of installation.

Before you start building the porch, you need to decide on the project.

Sketching this architectural element, pay attention to the following features:

1. Despite the apparent ease of the extension, it must be installed on a high-quality and reliable foundation connected with the foundation of the house as a single whole in order to avoid subsequent shrinkage.

1. The area in front of the entrance should be made secure enough so that while on it you can open the door without interference.
2. The staircase must be positioned at an angle of no more than 30 degrees, it must have an odd number of steps with a tread width of at least 25 cm.
3. The dimensions of the canopy over the entrance should be such that the canopy protects the entire structure, not just the door, from rain and snow.

1. A fairly strong frame is required. Although polycarbonate is lightweight, the frame must be able to withstand the load of snow on it.

Making a porch

Features of using plastic

Let's look at how to make a porch from cellular polycarbonate yourself. The classic design, as you already understood, should be equipped with a canopy over the stairs and landing, which ensures the comfort of using the entrance area.

The choice of polycarbonate for constructing the canopy over the entrance is determined by the following features this material:

1. Thanks to the special design with stiffening ribs, it bends perfectly without losing its strength characteristics. You can make visors from it complex shapes, which allows you to diversify the design of the porches.

1. Polycarbonate is very light. This allows you to abandon the use of massive metal structures and support pillars that support the roof. A light frame made of profiled pipe, fixed directly to the wall, is sufficient.

Note!
Here we are talking only about small canopies over the entrance.
If you plan to construct a large canopy protecting a terrace or veranda, you cannot do without additional supports.
However, they will not be very massive either.

1. Two-layer plastic tolerates well negative impacts surrounding natural environment , including significant temperature fluctuations. Thanks to a special film that blocks rays, it protects against both heavy rain, and from the scorching sun.
2. Installation of the polymer is as simple as possible. Regular self-tapping screws are used. You just need to install special thermal washers under their caps to compensate for thermal vibrations of the material.

Advice!
The consumer properties of this plastic are so high that it can be used not only for roofing, but also for walls.
Yes, it is quite popular closed porch made of polycarbonate.
It can play the role of a terrace or veranda.
And thanks to transparency, there is no need to make windows.

When purchasing, pay attention to quality. There are cheap Chinese counterfeits on sale, the price of which is lower than the market average. But it will not be possible to make a durable porch from such material.

Frame construction

Work should begin with the manufacture of the frame. It is better to make it from a profiled pipe. It is easier to connect individual parts with a rectangular or square cross-section and attach sheets of transparent plastic to them. Stock up sufficient quantity material, so as not to organize the delivery of additional elements later.

In addition, take care of the availability of self-tapping screws with special heads and thermal washers, adhesive tape and an end profile, which are used to form the edges of the polycarbonate sheets after installation.

You will also need tools:

• Bulgarian;
• welding machine;
• drill or hammer drill;
• screwdriver

The instructions for making the frame are as follows:

1. In production bottom harness visor frames. To do this, four parts are taken from a profiled pipe or other suitable rolled metal and welded together in the shape of a rectangle. Its dimensions, as already mentioned, must be selected so that the roof overhangs are larger than the area in front of the entrance and the stairs.
2. Arcs are made on which the polycarbonate will later be fixed. If you don't have pipe bending machine, then you can give the parts the necessary semicircular shape using a grinder.

To do this, cuts are made on one side of the profile to cover half the cross-section of the pipe, after which the element is bent. The number of cuts depends on the bend radius. The more, the stronger the bend.

At the end of the work, you need to go through the cut areas with a welding machine.

1. The resulting arc elements are welded to the frame. Make sure that the installation is carried out strictly vertically. A regular water level will help you with this.

First, the outer parts are mounted, and then the intermediate ones. The step is selected based on the size of your future structure. The recommended parameter is 50-60 cm.

1. Transverse elements are mounted. They can be made from the same metal profile or take parts with a smaller cross-section.
   In this process it is important to observe golden mean. If you make a sparse sheathing, the polycarbonate may collapse from snow pressure. And too many installed crossbars will prevent the penetration of light, and spoil appearance structures.
2. Having finished welding work, you should clean all welded seams from scale, and the surface of profiled pipes from dirt, dust and traces of rust. To speed up the process, you can use a sander with a special attachment.

1. The next stage is priming and painting. It is advisable to choose a shade that will reflect the sun's rays and prevent the metal frame from heating up. Perfect option- White color.

Advice!
If the size of the canopy is large, it is recommended to additionally strengthen the frame with corner bevels or gussets.

Installing plastic

Once the frame is finished and the paint has dried, the polycarbonate coating can be installed.

There are no particular difficulties here; it is advisable to dwell only on some tips:

1. The plastic should be positioned so that the internal jumpers are vertical to the ground. This will allow the condensation that forms to drain down easily.
2. When drilling holes for self-tapping screws, use a drill bit larger than necessary to compensate for thermal expansion of the material.
3. The screw caps must be equipped with special caps and washers.
4. The ends of the polycarbonate canopy are decorated with a special strip or adhesive tape that prevents dust, debris and insects from getting inside.

After installing the plastic, all that remains is to secure the canopy to the wall or pre-arranged pillars along the edges of the porch.

Conclusion

Now you know how to make a polycarbonate porch with your own hands. But so that quality finished design was at its best, it would be useful to familiarize yourself with the secrets of the technology for casting concrete steps and platforms. They are covered in detail in the video in this article.

Today, you won’t surprise anyone with a polycarbonate porch. Light, delicate, fresh, airy, beautiful, accessible, practical and relatively inexpensive. Undoubtedly, modern materials open up ample opportunities for the implementation of both simple and the most incredible architectural designs, and sometimes the design of a polycarbonate porch amazes with its sophistication and originality.

It cannot be said that polycarbonate immediately gained huge demand and love from customers, but over time it proved its competitiveness and firmly took a leading position among building materials, thanks to its unique physical and chemical properties. Next, we will explore in more detail why this material is so remarkable, and of course, we will tell you how to build a polycarbonate porch with your own hands.

An impressive set of advantages and a little about the disadvantages

So let’s say it straight out: polycarbonate is a unique material. Durable, lightweight, reliable, it transmits light well and at the same time retains ultraviolet radiation, thanks to the UV-stabilizing layer that is applied to outside leaf. It is not afraid of large temperature deltas, and calmly tolerates changes from -40 o C to +120 o C, while not deforming, frost-resistant, practically invulnerable to chemical and biological influences, with zero hygroscopicity. It is important that polycarbonate does not ignite and does not support combustion, and with a strong flame it only swells; it is a material with little ability to generate smoke, which is important both for private homes and for public buildings.

A polycarbonate porch, a photo of the most popular combination of materials, a transparent canopy and elegant forging, such extensions are suitable for almost any type of house

For the construction of porches, two types of polycarbonate are most often used: monolithic and cellular. The width of the sheets from all manufacturers is the same - 2100 mm, length 3000 or 6000 mm, such parameters are very convenient for transportation, and in addition, there is no need to make any additional joints when manufacturing large structures. In stores, the material can be cut in half.

Monolithic cast polymer without voids, in appearance no different from the usual silicate glass, even the physical and chemical characteristics of these materials are largely similar, but polycarbonate is 200 times stronger and 6 times lighter.

Cellular polycarbonate has a chamber structure. For the construction of a porch, a single-chamber material is usually used, which consists of 2 monolithic sheets connected by stiffening ribs. The recommended thickness for street canopies and porch canopies is 16 mm, although the owner is a gentleman, and you can always choose a different thickness. If serious mechanical loads are planned on the material, then it is better to give preference to 2, 3, 4-chamber or more sheets. The air inside the material provides additional heat and sound insulation.

Cellular polycarbonate, samples of popular colors

The most in great demand When constructing a porch, transparent polycarbonate is used, but the material has a basic range of colors, and if necessary, you can always choose the desired shade: white, blue, green, bronze, gold, graphite, etc. Colored polymers do not fade in the sun, since dyes are added at the production stage; they are located in the very structure of the sheets.

We have already noted that polycarbonate is very lightweight material, which is very preferable when making hanging structures over the porch; low weight reduces the load on load-bearing walls to a minimum. But when making porch canopies on vertical supports, the lightness of the material can bring unpleasant surprises. So, under such extensions it is impossible to build non-recessed columnar foundations in areas with high level groundwater and strong heaving of the soil, the expansion of the soil will simply squeeze out the extension. Alas, you will have to spend money on piles or slab foundations.

A single-pitched straight roof on support pillars is the most easy option how to build a polycarbonate porch with your own hands

Types of structures

Porch made of polycarbonate, photo examples in the article demonstrate the most good ideas for an extension, it can be either very modest, in the form of a canopy on the mensols, or impressive in size, even covering the entire area in front of the house. Such entrance groups are in demand both in public buildings: hospitals, shopping centers, business centers, and in private construction, largely due to the ease of installation of the structure. small porch At the dacha, it can be built from polycarbonate in a couple of days.

Porch-vestibule made of polycarbonate and brick

It would seem that the porch of a private house made of polycarbonate is somehow not at home, it is an alien material in a green area, it does not fit into the natural landscape. But thanks to its transparency and lightness, polycarbonate is almost invisible and does not spoil the appearance. To make the building look harmonious, the main thing is to choose the right porch design.

Enclosed polycarbonate porch, photo of light and practical design on a metal frame

A polycarbonate porch is either hanging structure, or support, on 4 or more pillars. All construction in general outline, consists of installing a frame and mounting it on sheet material. It is the frame that plays the main role in this case, so it is important to make a preliminary design of the structure, think over the dimensions, shape, support points, and what materials it will be made of.

The base for a polycarbonate porch can be made of wood or metal: forged, aluminum, iron corners and tubes. The easiest way to assemble a wooden frame is to assemble it yourself, but in order for it to last for a long time, it must be impregnated with a fire-fighting agent and an antiseptic.

Polycarbonate porch, closed at the side, on a frame made of square metal pipes

Aluminum structures are very light and durable, they are assembled on special corners and do not require welding work, the material withstands impact well aggressive environment, and does not require any additional processing.

The metal frame for the porch from the corners turns out to be very heavy; the cut parts will need to be cleaned of rust, if necessary, bent with a pipe bender, connected by welding, cleaned the joints with a grinder, and painted.

Covered polycarbonate terrace in a cottage village

The forged base for a polycarbonate porch is the most beautiful, but also the most expensive. But it must be said that standard, but no less beautiful forged mensols for suspended structures can be purchased at construction market at a very reasonable price.

The porch of the house is made of polycarbonate, photo of the canopy in front of the house, the design completely protects the entrance from precipitation

How to make a porch from polycarbonate

To make a porch you will need:

• metal pillars that will serve as vertical supports;
• profile with a square cross-section for sheathing;
• template according to which the arcs will be bent;
• polycarbonate;
• welding machine and grinder;
• self-tapping screws with thermal washers;
• tapes for joining and end profile according to the thickness of polycarbonate;
• primer for metal;
• dye.

First of all, install support pillars, which will support the entire structure. Trim them to required height, and link profile pipe along the heads to give the structure strength.

Then cut to size square pipe, lay her down flat surface, and carefully make cuts. The distance between them depends on the flatness of the pipe, usually 30-50 mm. Carefully bend the pipe according to the template, all arches should have the same radius, the recommended distance between them should be no more than 600 mm. Weld the finished arcs together with longitudinal jumpers, and install them on the prepared frame, weld the structure. Clean the manufactured frame, prime it, paint it. After completely dry metal blank for the porch, you can attach polycarbonate.

Diagram of how to properly screw a carbonate sheet

To do this, you need to cut off the sheet right size, it is better to make the cut along the stiffening rib. Next, mark and drill holes that should be 3 mm in diameter larger than the thermal washer leg, this will neutralize thermal expansion. The distance between the holes should be 300-500 mm. Blow and vacuum the polycarbonate thoroughly to ensure that no debris or dust remains. Seal the ends with special tape and put on the final profile. Screw the polycarbonate to the frame, do not try to tighten the screws tightly; the thermal washer should turn slightly with force.

You can decorate such a porch beautiful lamps or LED lighting, hanging pots with flowers on forged pendants would also be appropriate. Instead of metal railings, the sides can be covered with polycarbonate or even wood. But in principle, no additional finishing is required for the polycarbonate porch.

Porch made of polycarbonate and wood, an original idea for a summer house or country estate

The polycarbonate porch is very easy to use and is easy to clean with warm soapy water. Do not rub the structure with abrasives, solvents, ammonia, acetone, phenols, or ethers. If you did everything correctly, a polycarbonate porch will protect the entrance from rain and dust for a long time. Be sure to watch the video on how to make a polycarbonate porch on metal frame without the use of welding.

Any porch is a decoration of the house. It makes the interior attractive and also protects the home from dirt and dust. The question of the functionality of the porch is quite interesting. To give an unambiguous answer to this, you must first define the very concept of a porch. It is an extension, which includes a canopy and a staircase. Many are already accustomed to the presence of this structure in their homes, so few can give a detailed answer to the question of what its purpose is.

If we talk about the main function, then it should be considered as such protecting your home from various factors external environment that can cause inconvenience in a person’s life. The porch protects part of the wall and door of the house from rain, snow and cold. In the case where the ring is located directly from the ground, it protects the foundation from natural factors. Her top part can reach the floor. This solution is quite practical, since in this case the staircase is located at the top, which provides a comfortable and convenient climb to the door.

Another function of the porch is decorative. This structure can be quite diverse. Its appearance largely depends on the style of the home. Choice color range for the design of the porch, decorative elements, other types of finishing of this building, color is the prerogative of the owner of the building. There are no restrictions in this regard. The porch should act as an addition to the house and represent a single whole with it. This structure must be in harmony with the main architectural style of the home. Despite this, our ancestors built a porch mainly for protection from external factors.

If the owner decides to add a porch to the home, it is necessary to take into account the material from which the house itself is built. If the porch is harmoniously combined with the main building, then it will be pleasing to the eye, but only if the design, material and structure of this structure are similar to the house. Currently allocated several main types of porches:

• with rise;
• open;
• without lifting;
• closed.

The porches of these types differ in location. For example, when building a porch without a rise, it should be located at the level of the house. The appearance of such a structure resembles a terrace. Among its functions there is no protection from environmental factors. But the porch with a rise is both original and practical solution. It is usually located a meter below the level of the house. To get into the house using such a porch when climbing the stairs, you need to hold on to the railing while walking along the steps. At the moment, it is generally accepted that such structures are most relevant for filling houses.

Closed and open porch differ from each other by the presence of a roof and walls. For country house the open porch is the most The best decision. In this case, it is desirable that the house itself be well insulated, since a structure of this type does not provide protection from rain and winds. If the weather is good outside, then the porch open type will be indispensable. On its platform you can install sun loungers and sunbathe. Or put a table and chairs and use the area as a resting place.

Materials for making a porch for a home

During the construction of a structure such as a porch for a house, they use both primary and secondary materials. The main ones include the following:

• brick;
• tree;
• polycarbonate;
• metal;
• stone.

As mentioned above, when constructing a porch, it is necessary to take into account the material of the building itself. If you want to attach a structure to your house that will stand out in its appearance, you can use a combination of several materials at once. WITH wooden house A porch made of wood goes well. However, you can be original and use wood in combination with stone or brick.

It is not recommended to combine metal and wood. In this case, the structure attached to the house will look ridiculous. If the house itself is made of brick, then in this case the metal will be excellent choice for the construction of a porch. To create coziness on the porch area, you can use various ideas proposed by designers. In addition to them, you can decorate his area with flowers and pillows.

Secondary materials

Secondary materials are also used during construction. They are necessary for fastening, connecting, gluing elements. For example, if a structure is being built from brick, then can't do without cement mortar . And if wood is chosen as the material for the construction of this structure, then during the work you will need:

• hammer;
• door;
• nails.

When building any porch, you cannot do without a level, regardless of the features of the structure.

Features of a polycarbonate porch

A rather rare occurrence is a porch that is entirely made of polycarbonate. This is because most often this material used for canopies in houses. Canopies made from polycarbonate are an element with large set functions:

• installing a porch made of this material provides any building with a complete look. Thanks to him it looks original. In this case, the structure performs the functions inherent in the porch;
• Another function of a canopy made of this material is that it provides protection for the front door from the sun and rain. By installing it in front of your house, it will always be cool and dry inside.

Advantages of polycarbonate

In general, polycarbonate is practical material, at the same time inexpensive, with an original look. The most best qualities it manifests itself when it is used in the construction of canopies for houses.

Density is one of important characteristics this material. This is why it is quite widely used today.

One of important qualities polycarbonate - its flexibility, due to which it can be used to create various shapes.

Its color range is quite varied. Therefore, knowing fashion trends in construction, you can create a canopy original look, which will look stylish as part of the house.

Polycarbonate has many advantages. There are practically no downsides. One of its advantages is good resistance to temperature changes. Thanks to this, a porch made from this material will serve for a long time, and external factors will not affect its appearance in any way. This material is also characterized by high strength. This means its consistent quality even when used in harsh conditions. A wide range of colors makes it possible to select the most suitable material for the structure being created. suitable color. In this case, the created porch will be in harmony with the building.

If we talk about the disadvantages of this material, then, of course, it also has them. However, they are not characteristic of a canopy, but for construction closed type . They arise when polycarbonate is used not only to construct a roof, but also as a material for walls. This structure, built entirely from polycarbonate, looks unaesthetic. Therefore, experts recommend combining this material with some other material during construction work. The porch, which has both the roof and walls made of polycarbonate, does not look quite right. But if you use it in combination with other materials, for example, wood or stone, the structure takes on a stylish and original look.

Polycarbonate porch design

Here we're talking about not about materials for construction, but about how the house looks. If your home is a modest-looking building, and in its architectural style some have not been implemented original ideas, then in this case the best choice - regular visor, made of polycarbonate. It has a decent appearance and looks practical.

If the building is decorated with taste, and its area is average in size, then in this case a good idea would be to create a roof made of polycarbonate, which is connected to a canopy made of wood. Polycarbonate goes well with wooden frame. You can use material of any color. This option will look especially harmonious as part of a wooden structure. Steel frame used to create canopies for mansions, public buildings and businesses. The use of such a design provides the buildings with a finished look and gives them solidity.

Before you start construction work, you need to decide which option is preferable for you. If your choice is a canopy, then in this case you need to purchase material desired color , after which you should give the material a shape that is suitable for your design. Nails and screws are used to secure the material. It is best to attach it to frames made of iron or wood.

If your choice fell on a structure made of this material, then work should begin by installing the frame. This is very important, since the strength and reliability of the structure depends on it. A frame made of wood or metal must be treated with special compounds before installation. This will provide protection from rodents, corrosion and rust. Only then can polycarbonate be installed on it. As a fastener you can use screws, nails.

Conclusion

Polycarbonate is practical material. Plus it's inexpensive. If you decide to add a porch to your home, then choosing it is a smart decision. Having built it, your home will have a structure that will decorate it and will serve for a long time, without requiring attention.

The appearance of a mansion can tell a lot about its owners. You can emphasize the originality of the design of the structure with the help of a porch. This is functional and decorative element sets the mood for the entire building. Therefore, for many owners of houses and dachas there remains topical issue, how and from what materials.

One of the inexpensive and lightweight structures is the structure made of polycarbonate. You will learn about the features, design, as well as the technology for constructing a porch from this material in this article.

Polymers as a building material

Carbonate sheets are a universal means for the construction and finishing of various buildings and structures. They have a number of advantages:

• non-flammable;
• 88% transparency, providing good lighting porch;
• flexibility, allowing the formation of structures of various configurations;
• high resistance to temperature and mechanical influences;
• beautiful appearance. A polycarbonate porch at the dacha can have different colors.

On a note: the material is 150-200 times stronger than glass, and, with a similar thickness, has less weight.

The photo shows a domed polycarbonate canopy over the porch

Types of material

To build a polycarbonate porch for a private house, it is important to choose the right material. It comes in two varieties:

• honeycomb – a material with hollow cells inside. This structure ensures the material’s bending strength, lightness, and thermal insulation;
• monolithic – a material with an integral structure. This polymer is smooth and dense to the touch, durable, and comes in a wide range of colors.

Types of polycarbonate

Advice: for the construction of a veranda, carbonate is selected depending on the desired effect.

Due to the many positive qualities of the material, polycarbonate can be varied. The simplest ones are small ones.

Small budget porch made of polycarbonate, photo

Look more interesting complex designs– . To build them, you need to have skills in working with the material and know how to bend it correctly.

Beautiful asymmetrical polycarbonate porch, photo

You can also construct from the material closed design. A closed polycarbonate porch can be combined from various materials (for example, a roof made of polymer, etc.).

Cozy closed porch made of polycarbonate, photo

Due to the ease of installation, you can build a polycarbonate porch with your own hands. This design will decorate the entrance to the house, making it bright, unusual, and individual.

Unusual design of a structure made of colored monolithic polymer

Decorating a polycarbonate porch: combination with other materials

How independent material Polycarbonate is not used for the construction and finishing of the veranda. A porch made of polycarbonate looks interesting. Thus, the support pillars of the structure can be made of wood, made of light transparent polycarbonate sheets.

Lightweight terrace for a house made of wood and polymer

Imitation of antiquity - polycarbonate house porch, photo

The combination of cellular polycarbonate with chrome pipes looks stylish and modern. And if you use non-standard forms in the design of the structure, it will become a real decoration of the facade.

Interesting canopy in high-tech style

Carbonate structures are predominantly open. They can be decorated with flowers and climbing plants.

Decoration of an open terrace

Technology for constructing a veranda from polymer sheets

Polycarbonate? You need to start with choosing the material and drawing up the project. Without a sketch or drawing of the extension, it is very difficult to assemble the structure correctly.

Please note: For the construction of canopies, roofs, partitions, and canopies, polymer with a thickness of 6-8 mm is used.

Design

The porch consists of the following elements:

• foundation;
• ( – open type);
• walls (if the structure is closed);

At the design stage, you should draw up a project taking into account all the dimensions of the porch. There are no specific rules for what size this structure should be, the main thing is that the design is convenient to use.

Drawings of various polymer canopies

Attention: when developing a drawing, remember that the porch must withstand heavy loads, so you should build it reliable foundation from quality materials.

Construction of the foundation

Before making polycarbonate, it is necessary to prepare the site for construction. After this, they dig a pit 1-1.3 m deep. They lay it in sand cushion, and then formwork is installed into which concrete is poured, forming steps and a porch platform. At this stage, embedded parts are installed for subsequent attachment of the canopy frame.

Remember: For convenient opening of the door, the level of the platform should be 5-6 cm below the level of the threshold of the house.

Structure base

Creating a wireframe

Next, they are attached to the embedded parts, which are connected at the top along the perimeter of the visor by horizontal crossbars. After this, the remaining parts of the structure are attached by welding or screwing with hardware.

Please note: to ensure the frame is reliable, the horizontal elements are attached between vertical posts at a distance of 0.4-0.5 m.

Canopy frame

Installation of polymer sheets

You can sheathe the frame with polycarbonate after it is attached, but it is more convenient to do this at a low level. To do this, the sheets, without removing the protective film, are cut into required dimensions. They are attached to the frame using self-tapping screws and thermal washers, which will protect against water leakage. To ensure that the visor holds its shape, stiffening ribs are installed along the edges of the sheets.

The sheets are attached to the frame with the side on which protection from UV rays is applied facing up.

Attention: Since the material reacts to temperature fluctuations, you should not fix it too tightly.

Fastening the structure

The finished canopy frame should be installed on supports and attached to the wall. If the polycarbonate was not initially attached to the frame, then they begin to bend and attach the sheets to the profiles. The optimal distance between attachment points is 30 cm.

Attaching the frame to the wall

All joints of the visor are carefully sealed. After installation is complete protective film removable from polycarbonate.

The final stage of canopy installation

Bottom line

Polycarbonate is good and inexpensive material for the construction of a porch of a house. The polymer makes it possible to implement any design design. Even buildings complex configurations After a little training you can build it yourself.