The fireplace is a radical response to the lack of comfort in the home. The reflections of the flame fascinate and drive away vain thoughts. Warmth instills peace of mind. A fireplace made of plasterboard, made with your own hands and imagination, can provide this.

There are not many things in the apartment that can be given a pronounced individual style, without fear of causing irreparable damage to a previously thought-out composition. It will become the visual and organizational dominant of the living space. It can be given any shape and style to emphasize the implemented design of the room or, conversely, to defuse the orderliness with a catchy interior element. For the home handyman Even simple fireplace cladding with your own hands is possible for average qualifications.

The influence of a plasterboard fireplace on the layout

At the same time, the decision to install a fireplace in your apartment should not be taken lightly. Wrong decisions will turn advantages into disadvantages, and an unnecessary pretentious shelf for trash and dust will be piled up in the corner. Therefore, we have prepared information on how to make a fireplace from plasterboard, in order to expand your design horizons.

First, you should carefully consider the changes in layout that the fireplace will cause and choose a suitable location. Based on your conclusions, think about the shape and appearance that you would like to see.

The simple design of plasterboard fireplaces reveals limitless possibilities this material. Don’t get hung up on grave granite or the brick splendor of fences old England or marble covered with bronze to look like gold. There are many others stylistic decisions, the study of which can be a pleasure.

Simulated fire vs natural flame

Industry home comfort offers several options for simulating live fire with varying degrees of authenticity. From a full-fledged picture of a fire to an almost completely identical process of burning birch logs with smoke and flame. The dimensions and characteristics of the selected equipment will allow you to determine the dimensions of the plasterboard fireplace required for installation.

This is much better than the real soot, soot, firewood and drafts of a real fireplace. The question of choice is only the amount you are willing to pay for it and the goals you want to achieve. An electric fireplace, or combustion simulator, is the part of the structure that you will have to buy in finished form. You won’t be able to make it yourself, and there’s no point in experimenting. But decorating an electric fireplace with your own hands will allow you to show creativity.

Start of installation work

The experience of using plasterboard in interior decoration can be expanded to interior elements. Making fireplaces of the desired appearance with your own hands is a completely feasible task. Make a drawing and put the main dimensions on it. Many people neglect this stage by doing big mistake at the very beginning of the case. Three sets of work are conventionally distinguished:

1. frame manufacturing
2. covering the fireplace with plasterboard
3. finishing

The frame can be assembled from a tin U- and L-shaped profile or from wood. It is difficult to say which is preferable; it all depends on the dominant skills of the performer. The advantage of tin can be considered that it allows you to easily reproduce a broken and even bent surface.

We use a tin profile

Tin profiles are easily attached at intersections in one plane. The elements are connected using small self-tapping screws using a screwdriver or similar attachment on a drill or screwdriver. When making plaster fireplaces using tin profiles, evaluate your metal handling skills. Bends or breaks in the profile are made along the line of cuts in the side flanges. They should be made with an angle cutting machine with a metal cutting disk installed on it. You can use a jigsaw with a metal file.

All cuts are made in clearly marked areas to ensure bending or creasing front side profile strictly in the required place. When assembling a fireplace from plasterboard with your own hands, you will have to stock up on tools for marking:

• square
• building level
• tape measure, construction ruler or laser tape measure
• construction marker for making marks and lines

The main requirement for the results of the work is that all surfaces must present a perfect plane.

Frame covering

Having completed the frame, we begin to create the surface. It is necessary to install sheets of drywall on the future fireplace. They are cut according to the configuration of the plane being closed. For trimming you can use construction knife, a fine-toothed hacksaw or a cutting machine. The material cuts and breaks very easily. It is enough to draw a fault line and gently press along it along the loose side of the sheet. Drywall is attached to the frame with self-tapping screws, the length of which is about a centimeter greater than the thickness of the sheet and a diameter of about five millimeters.

After installing the sheets, you can putty the joints and seams using putty tape. This is not necessary if the surface is not subsequently painted or covered with film. Attention should be paid to careful alignment of the ends of the sheets facing intersecting planes. Do not forget that the lining of the fireplace insert with plasterboard should not be continuous, since electrical appliances installed in it need to remove heat. Need to leave ventilation holes at the top of the structure.

Finishing work: finishing the fireplace and connecting the fire simulator

Having created the surface of the product, we proceed to the final operations. It is important to decide on the composition of the work before it begins, by making a design project or sketch. The decision to design a fireplace from plasterboard should be supported by your abilities. If you doubt them, then it is better to limit yourself to the type of finishing that you are ready to perform with sufficient quality.

One of the options for a simplified solution could be the use of ready-made tiles or panels, which can easily be used to decorate the fireplace portal. Looks good simple coloring lime or metal finish. The main thing to remember is that the design of fireplaces is endlessly varied!

Next, you should install the electrical wiring through a pre-designed or locally made inlet hole. Install a fire simulator, turn it on, pull up a chair and tell your friends that now you know how to make a fireplace from sheets of plasterboard with your own hands.

A fireplace designed in compliance with all basic rules and building codes, will give its owners warmth and decorate the interior of their home for many years. However, in order for the fireplace to be truly beautiful and fit well into the surrounding space, it is imperative to finish it.

The existing options for decorating private fireplaces are so diverse that you can choose a decor option that fits perfectly into the interior without any problems.

After finishing the fireplace masonry, the joints must be opened. In accordance with the technology, the solution is distributed between the masonry elements using a special shaped tool. The seams can be made depressed or convex at the owner’s choice.
The seams can also be filled with a solution containing pigments of the desired color. Finished design will look quite beautiful and original.

Begin processing by making horizontal seams. Clean the dried solution with a brush made of natural materials. It is better not to use tools with wire bristles for this processing - they are too rough.

Finally, coat the masonry with a special heat-resistant paint and varnish composition of your choice.

Painted brick fireplace

Plaster finishing

The easiest to implement and one of the most budget-friendly methods of finishing a fireplace, which is widely popular.

Plaster allows you to create a wide variety of decorative effects. For example, you can apply finishing plaster using a sponge or a special rubber spatula, which will create an attractive “wavy” effect. To enhance the result obtained, the solution can be slightly tinted with water-based or lime-based paint.

Give erected brick fireplace Dry completely and begin plastering.

Video - Plastering a fireplace

First step

Add to composition plaster mixture fiberglass, pre-cut into small pieces, and salt. Such additives will help improve the quality of the coating.

Second step

Clean the surface of the fireplace and caulk the seams to a depth of about an inch. It's best to keep the fireplace a little warm, so you'll need to heat it up before you start plastering.

Third step

Lightly dampen the fireplace and begin applying the first coat of plaster using the "spray" method.

Fourth step

Venetian - fireplace decor

After completely dry first layer of finishing, proceed to applying the finishing plaster. To do this, use a trowel or brush. Level the applied coating using a trowel.

The thickness of the finishing layer of plaster should be no more than 0.5 cm. Level the coating using circular movements. The surface can be lightly sprayed with water if necessary.

Decoration of the fireplace - vine molding and decorative plaster

The material is attached traditionally to a pre-arranged frame. During the process of attaching vertical frame racks Make sure that in future the joints of the sheets are as neat as possible.

The connection of slabs can be carried out exclusively on frame elements. It is prohibited to fasten sheets between profiles.

First step

Apply marks to the mounting surfaces to secure the profiles. Make sure that the markings are made evenly and at the same level.

Second step

Secure the frame posts in accordance with the markings. Fix the profiles using screws.

Third step

Mount horizontal frame elements between vertical posts.

Fourth step

Proceed to covering the frame. Use self-tapping screws to attach drywall. Place fasteners every 150 mm.

Fifth step

Seal the joints using tape previously soaked in gypsum solution.

Sixth step

Ensure that the corners of the structure are secured using metal corners.

At the end, all you have to do is plaster the finished cladding. To do this, use the instructions above. You can also decorate drywall with other suitable material.

Do you want your fireplace to look truly elegant and chic? Then turn your attention to finishing with stone. Natural facing stone characterized by excellent performance characteristics and fits perfectly into any interior.

If you have access to specialized equipment, you can do the pre-processing and installation of marble or granite yourself. In the absence of the necessary equipment, give preference to shell rocks, limestone and rubble stone.

Artificial stone has no noticeable differences in appearance from natural finishing material. It can also be safely used to decorate a fireplace.

You can make artificial stone with your own hands. To do this, mix cement, sifted sand and coloring pigments of the desired color and pour the resulting composition into silicone molds. Allow the solution in the molds to harden, remove the resulting products and use them to decorate the fireplace.

Direct cladding is performed in the same way as in the case of natural stone, and when using an artificial analogue. It is enough just to fix the elements on the surface of the fireplace using mastic or tile adhesive. You can first lay out the stones on the floor to see the future finish and choose the most suitable one. best option placing stones directly on the surface of the fireplace.

This cladding belongs to the category of the most popular options for finishing fireplaces. The following materials are best suited for finishing:

All mentioned materials are characterized by excellent wear resistance, resistance to elevated temperatures and mechanical damage.

When choosing a finishing material, be sure to pay attention to the size of the elements. Large tile It is much easier and faster to install, but it will pose difficulties when fitting it to shelves, ledges and all kinds of niches. WITH small tiles Such problems will not arise, but you will spend more time on its installation.

It is also important to choose the right glue mixture for installation of tiles. Use only heat-resistant compounds made with elastic substances. Thanks to its elastic structure, the glue will not deform when the temperature rises.

First step

Prepare the fireplace for tiling. To do this, clean and deepen the seams. If there is any old covering on the fireplace, remove it.

If desired, coatings such as paint and plaster can be left in place by stretching over it metal mesh with cell sizes up to 150x150 mm. Fasten the mesh using self-tapping screws or nails.

Second step

Level the base with glue. Allow the applied mixture to absorb well and dry.

Third step

Mark the surface to be finished and get to work. Start installing the tiles from the bottom row of the fireplace.

Sequence of work: using a notched trowel on reverse side Glue is applied to the tiles, the element is firmly applied to the base and gently tapped with a rubber hammer.

To ensure that the seams between the tiles are the same size, use special plastic crosses, installing 2 pieces at a time. on each horizontal and vertical side of the facing element.

Immediately after completing the finishing work, remove any remaining glue, as It is extremely difficult to scrape it off once it dries.

Leave the finish to dry for about a day and then sand the seams. For this treatment, use paste-like mineral grout. This product is based on cement. Fill the joints with grout and smooth them carefully using a damp sponge.

Leave the grout to dry for about a day. Finally, all you have to do is treat the filled seams with a special dirt-repellent agent.

Tiles finishing

A fireplace with such cladding has a very original, beautiful and unusual appearance. For finishing, you can use glossy and matte tiles, with a relief surface or some kind of pattern.

The main difference between a tile and an ordinary tile is the presence of a special box-shaped protrusion, known as a rumpa.

This element allows you to attach tiles to the surface of the structure. In addition, the pumps accumulate heat during the combustion process of the fireplace, which contributes to some improvement in the heat transfer of the unit.

First step

Prepare finishing material. Carefully inspect the tiles. Even samples from the same batch may have slightly different shades. Arrange the tiles so that the finished finish looks as uniform and harmonious as possible.

Second step

Adjust the cladding parts to the same size. To do this, use a grinder.

Third step

Proceed to attaching the tiles. The elements are fixed using wire.

Fill the tile tumbler with a mixture of brick fragments and clay to 50% of the volume. Insert a piece of metal wire into the tiller. Traditionally, a rod with a diameter of 0.5 cm is used. In this case, the segment must be placed with some bend upward.

Tie to the middle of the installed rod soft wire. Fill the pump to its full capacity with the previously mentioned mixture.

Lay the tile, press it tightly to the surface and hide the soft wire in the masonry joint.

To connect the tiles to each other, use U-clamps.

Wood finishing

For finishing Natural wood is perfect for a fireplace. The breed can be any, because... special modern impregnations allow you to give wood the appearance of even the most valuable species, but it is better to use high-quality, durable and strong material.
Wood is used to decorate the fireplace portal. Shelves are also made from this material.

The wood must first be impregnated with a fire retardant to increase its fire-resistant properties. Finally, the structure can be painted and varnished.

Good luck!

Video - Do-it-yourself fireplace decoration

The fireplace is a radical response to the lack of comfort in the home. The reflections of the flame fascinate and drive away vain thoughts. Warmth instills peace of mind. A fireplace made of plasterboard, made with your own hands and imagination, can provide this.

There are not many things in the apartment that can be given a distinct individual style without fear of causing irreparable damage to a previously thought-out composition. It will become the visual and organizational dominant of the living space. It can be given any shape and style to emphasize the implemented design of the room or, conversely, to defuse the orderliness with a catchy interior element. Even a simple DIY fireplace cladding can be done by a semi-skilled home craftsman.

The influence of a plasterboard fireplace on the layout

At the same time, the decision to install a fireplace in your apartment should not be taken lightly. Wrong decisions will turn advantages into disadvantages, and an unnecessary pretentious shelf for trash and dust will be piled up in the corner. Therefore, we have prepared information on how to make a fireplace from plasterboard, in order to expand your design horizons.

First, you should carefully consider the changes in layout that the fireplace will cause and choose a suitable location. Based on your conclusions, think about the shape and appearance that you would like to see.

The simple design of plasterboard fireplaces reveals the limitless possibilities of this material. Don't get hung up on grave granite, the brick splendor of old England fences, or marble covered in bronze to look like gold. There are many other stylistic choices that can be fun to explore.

Simulated fire vs natural flame

The home comfort industry offers several options for simulating live fire with varying degrees of authenticity. From a full-fledged picture of a fire to an almost completely identical process of burning birch logs with smoke and flame. The dimensions and characteristics of the selected equipment will allow you to determine the dimensions of the plasterboard fireplace required for installation.

Fireplace decoration from A to Z

Fireplace decoration with goldstone stone. Application decorative plaster Dufa Modellierputz. Method of cutting natural...

This is much better than the real soot, soot, firewood and drafts of a real fireplace. The question of choice is only the amount you are willing to pay for it and the goals you want to achieve. An electric fireplace, or combustion simulator, is that part of the structure that will have to be purchased ready-made. You won’t be able to make it yourself, and there’s no point in experimenting. But decorating an electric fireplace with your own hands will allow you to show creativity.

Start of installation work

The experience of using plasterboard in interior decoration can be expanded to interior elements. Making fireplaces of the desired appearance with your own hands is a completely feasible task. Make a drawing and put the main dimensions on it. Many people neglect this stage, making a big mistake at the very beginning of the matter. Three sets of work are conventionally distinguished:

1. frame manufacturing
2. covering the fireplace with plasterboard
3. finishing

We use a tin profile

Tin profiles are easily attached at intersections in one plane. The elements are connected using small self-tapping screws using a screwdriver or similar attachment on a drill or screwdriver. When making plaster fireplaces using tin profiles, evaluate your metal handling skills. Bends or breaks in the profile are made along the line of cuts in the side flanges. They should be made with an angle cutting machine with a metal cutting disk installed on it. You can use a jigsaw with a metal file.

All cuts are made in clearly marked places to ensure that the front side of the profile is bent or folded exactly in the required place. When assembling a fireplace from plasterboard with your own hands, you will have to stock up on marking tools:

• square
• building level
• tape measure, construction ruler or laser tape measure
• construction marker for making marks and lines

The main requirement for the results of the work is that all surfaces must present a perfect plane.

Having completed the frame, we begin to create the surface. It is necessary to install sheets of drywall on the future fireplace. They are cut according to the configuration of the plane being closed. For pruning, you can use a construction knife, a hacksaw with fine teeth, or a cutting machine. The material cuts and breaks very easily. It is enough to draw a fault line and gently press along it along the loose side of the sheet. Drywall is attached to the frame with self-tapping screws, the length of which is about a centimeter greater than the thickness of the sheet and a diameter of about five millimeters.

After installing the sheets, you can putty the joints and seams using putty tape. This is not necessary if the surface is not subsequently painted or covered with film. Attention should be paid to careful alignment of the ends of the sheets facing intersecting planes. Do not forget that the lining of the fireplace insert with plasterboard should not be continuous, since electrical appliances installed in it need to remove heat. It is necessary to leave ventilation holes at the top of the structure.

Finishing work: finishing the fireplace and connecting the fire simulator

Having created the surface of the product, we proceed to the final operations. It is important to decide on the composition of the work before it begins, by making a design project or sketch. The decision to design a fireplace from plasterboard should be supported by your abilities. If you doubt them, then it is better to limit yourself to the type of finishing that you are ready to perform with sufficient quality.

One of the options for a simplified solution could be the use of ready-made tiles or panels, which can easily be used to decorate the fireplace portal. A simple lime paint or metal finish looks good. The main thing to remember is that the design of fireplaces is endlessly varied!

Next, you should install the electrical wiring through a pre-designed or locally made inlet hole. Install a fire simulator, turn it on, pull up a chair and tell your friends that now you know how to make a fireplace from sheets of plasterboard with your own hands.

Cladding the fireplace with plasterboard: step-by-step work

Cladding fireplaces with plasterboard is simple. It is not particularly difficult and can be done by anyone who wants to do it themselves.

How to install a fireplace

Cladding a fireplace with plasterboard requires some skill.

You will have to use:

• With a ruler.
• Square.
• Plumb to check the verticality of the fireplace.
• A level that will show parallelism.
• With a tape measure.
• With a pencil.
• Knife for construction.
• A hacksaw with fine teeth.
• Impact drill.
• Screwdriver for screws.

Advice. Drywall sheets must be flat. For this purpose, a load is placed on them.

Comparison table between a plasterboard fireplace and a marble fireplace:

Plasterboard fireplace

Marble fireplace

Does not require large financial outlays. It can be done quickly.

This fireplace is quite expensive. Its production will take a long time.

It is characterized by mobility and quick dismantling.

A marble fireplace is very difficult to disassemble.

It is safe because there is no open heating source.

It poses a certain danger, as a spark may hit the floor if installed incorrectly.

A plasterboard fireplace can be installed even in a small room.

A marble fireplace requires a lot of space.

A person will never get burned on a plasterboard fireplace. Furniture will also not be damaged.

Hot coals can jump out of a marble fireplace, which pose a danger to others and can ruin the polish of your furniture.

Choosing a location

Many masters share their valuable recommendations regarding this issue.

Advice. For greater effect from the fireplace, you should definitely consider the presence of a decorative chimney that can complement the design of your apartment. Its basis is also drywall.

On initial stage make a drawing of your fireplace on paper:

• Determine the length, width and height of the future product.
• Take into account the space around the fireplace.
• This nuance is required. If there is no space, then you should resort to making a wall-mounted structure.
• Before you begin your work, draw the lines of the fireplace on the wall. A profile is attached to the lines.

This way you can make sure how the size of this design fits your interior.

How to prepare a place for a fireplace

The installation site must be a flat area, completely clear of debris.

The plane must be rigid enough to support the mass of the fireplace:

• If the floor in your apartment is made of wood, and the weight of the fireplace is quite large, then it is recommended to pour a concrete platform.
• For the base, formwork is made in such a way that the height of the platform is at least 100 mm from the floor level.
• Next, you should take into account the protection of the walls from high temperatures.
• For this purpose, as a rule, they resort to the use of aerated concrete slabs, which provide high-quality protection.

Advice. Take careful measurements of aerated concrete slabs. They must be completely covered with plasterboard sheets after installing the fireplace. Once the fireplace frame is ready, you will not be able to correct the measurement error.

• During the manufacturing process of the base, attention is paid to ensuring that the planes are parallel. The fireplace is mounted on a base, so any irregularities will affect the configuration. Be sure to use a level for construction.
• To make the box, you can resort to using a metal profile or a wooden beam. If you choose the latter, treat it with an antiseptic available in retail sales.
• Antiseptics help extend the service life of the configuration and will serve reliable protection from rot and mold.

Remember! After processing, the material must dry thoroughly!

How to install the frame

The main thing during installation is compliance with the geometric shape.

Remember that even the slightest deviation from the norm will result in an inaccuracy in centimeters for you when last stage finishing.

Carry out your work very carefully:

• A frame is attached to the wall for support. For this purpose, the profile is initially trimmed the right size and fastening is done. For surfaces made of wood, you can use self-tapping screws. If the plane is brick or concrete, then the hole is made using a hammer drill. Dowels are used for connection.
• When attaching the frame to the wall, please note that you should not purchase sets of dowels. You need pacifiers and self-tapping screws, the cross-section of which is several millimeters larger than their diameter.
• Only if you follow this rule will you achieve rigidity and reliability of fastening.

In order to install the racks, the profile size should be cut. Fastening is done using self-tapping screws.

• During installation, angles are checked using a square, and parallelism is checked using a construction level. The shape of the fireplace must be impeccable.
• Starts cutting drywall to size. We attach it to the frame using self-tapping screws. A mandatory rule must be followed here.
• If your fireplace is three-dimensional, then lining the fireplace insert with plasterboard is carried out in two layers. Make finishing only from solid sheets.
• If you did not take this nuance into account, you will have to make auxiliary slats in the frame. The drywall connection is carried out only on a rigid plane. The seam is processed using a serpyanka.

The finishing of the fireplace insert is carried out with precision, as described above. For safety purposes, the walls at the back and sides are covered with heat-reflecting screens.

How to decorate a fireplace

The plasterboard fireplace insert is covered with putty.

The putty should be even and smooth:

• There should be no gaps in the drywall.
• Dry putty is poured into a container.
• Water is added to it.
• The putty is thoroughly mixed.
• The mass should be without lumps. For this purpose, they resort to using a drill with an attachment.
• It is with its help that the contents will become homogeneous and similar to thick sour cream.
• After this procedure, the resulting mass is applied to the surface of the drywall.
• The putty must dry thoroughly. This was the first layer of base. The next one is applied to it.
• It should be thinner than the previous one. For this purpose, take a wider spatula.
• Achieve ideal surface evenness. After this, sandpaper is taken, which should be used to process the layers of putty.
• If cavities occur, they are filled with putty solution and leveled again.

Advice. If you decide to putty the fireplace yourself, then its corner should be treated using perforated tape. With its help, you can crush with perfect evenness.

Mantel

After the fireplace insert is finished, and fireplace mantel The plasterboard has been produced, we proceed to the finishing stage. Price for finishing work not too high.

Therefore, facing fireplaces with plaster or other material ( ceramic tile, decorative panels made of plastic, decorative rock) can be made with your own hands.

Self-cladding of plasterboard fireplaces can be done quite well if you follow the finishing technology.

Fireplace decoration - stylish options for cladding and design of the central element of the room

Installing a fireplace in the house helps not only create additional source heating the room, but also decorate the interior in an original way. There are many ways decorative finishing fireplace surface. Most of them can be used without the help of professional technicians.

And we will tell you how to do this in the article. This option may not seem very successful from the point of view fire safety. But it is not so. Thanks to the naturalness of the wood, it turns out very beautiful finish fireplace. It is necessary to use heat-resistant species - alder or ash with a special coating against fire.

It is also advisable to trim only individual structural elements that are not in contact with the firebox with wood. And cover her up protective screen. The plaster is applied using the following technology:

• removing old coating and cleaning from dirt;
• moisturizing the walls of the structure;
• jointing masonry joints up to 10 mm deep for better adhesion;
• heating the base;
• fastening reinforcing mesh with nails or screws;
• diluting the mixture and applying it to the surface;
• drying the plaster for 2-3 days with periodic heating of the fireplace;
• applying decorative paint or putty to the surface.

At first facing works it is necessary to prepare a standard set of tools. The surface should also be treated. All masonry seams are unstitched, the walls of the fireplace are cleaned of dirt and treated with a primer.

To strengthen the structure, it is necessary to make reinforcement by securing the mesh with screws.

How to decorate a plasterboard fireplace

When preparing a frame project, pay close attention to measurements and calculations, especially when it comes to constructing a portal for an electric fireplace - you should take into account the thickness of the plasterboard sheets (9.5 or 12.5 mm) and the thickness internal lining. The working drawings according to which the fireplace will be built must contain the dimensions of all elements and the principles of their fastening to each other - this will simplify the work as much as possible. Advice. If brick is used in the construction of a fireplace, it should be red. It holds heat well and looks more aesthetically beautiful.

The experience of using plasterboard in interior decoration can be expanded to interior elements. Making fireplaces of the desired appearance with your own hands is a completely feasible task. Make a drawing and put the main dimensions on it. Many people neglect this stage, making a big mistake at the very beginning of the matter.

Three sets of work are conventionally distinguished: The frame can be assembled from a tin U- and L-shaped profile or from wood. It is difficult to say which is preferable; it all depends on the dominant skills of the performer. The advantage of tin can be considered that it allows you to easily reproduce a broken and even bent surface.

Before you start creating a false fireplace, choose the location for its installation and decide on the purpose of the structure. The easiest way is to build a compact imitation of a fireplace, designed to use candles as a source of live fire. This is the only option with an open flame; in other cases you will have to make do with installing an electric fireplace or a screen on which the image of the flame will turn on.

How to decorate a plasterboard fireplace: materials and execution

This design method allows you to profitably save not only effort, but also time, thanks to simple application and minimal drying interval. Many people want to see one of such original elements as a fireplace in their home or apartment. In order for this unit not only to fully perform its heating function, but also to become a harmonious addition to general interior, you need to choose the most suitable style and execution.

If you don’t know how to decorate a plasterboard fireplace, then in this article you can find useful tips and recommendations that will help you make the right choice. In order to carry out such a design, it is enough to simply sheathe a metal or wooden frame sheets of this material. Its main advantages and features include:

• Durability. It has an almost unlimited service life. The material does not lose its original qualities, characteristics and properties over the years;
• Easy care. Most types of stone do not require regular and complex maintenance, with the exception of marble and some others with a non-uniform and grooved surface;
• Fire resistance and versatility. When properly insulated, it tolerates temperature changes well and is therefore suitable for all types of installations.

The plaster retains its original appearance for a long time; the surface does not crack or darken over time. Does not require special or complex care.

Decorative finishing of the fireplace: 8 materials for facing the fireplace photo

It is better to buy tiles with a margin of 10-15%, and you can purchase not only standard format products, but also corner elements. Installation does not require special skills or the use of specific tools: Tiles are the most popular finishing method hearth and home. Use regular tiles You can’t - it won’t withstand high temperatures.
As a rule, the following types of ceramic tiles are used for facing a fireplace: Many manufacturers offer both base and finishing plaster. The first is applied in a layer of 10 mm, intended for rough finishing and preparing a flat base. Finishing layer applied with a thickness of 3 mm. This is not even finishing in the traditional sense of the word.

In this case not there is talk about installing some kind of facing material on top of the fireplace. The brick from which the fireplace is constructed is finished accordingly. This is both the simplicity and complexity of the method.

• resistance to high temperatures, the ability to “breathe with the fireplace;
• high heat transfer and the ability to accumulate heat, which increases heat transfer;
• moisture resistance, frost resistance, resistance to sunlight;
• ease of care;
• durability;
• environmental friendliness, no odors when heating;
• chic appearance and ample choice.

The frame should be sheathed with plasterboard. This lightweight material, which lends itself well to cutting. He is easy to work with. Specifications the material is such that it is used not only for decorative purposes, but also for the construction of non-load-bearing partitions, suspended ceilings, wall cladding, when creating columns, arches and other structures. Quality plasterboard sheets, made in accordance with GOST, are durable and can withstand additional weight.

The dimensions of the fireplace in the apartment must correspond to the overall space of the room in which it is located. For large room Large fireplaces are suitable, but they will look appropriate in a small one small structures. A false fireplace is often installed in the hall, living room, kitchen, bedroom and even bathroom.

It is sometimes used as a TV stand. The fireplace, depending on the interior of the room, can be decorated in classic style, modern, rustic, English, hi-tech. For heating structures the most rational choice are metal fireboxes.

A wide selection of similar products, as well as their custom manufacturing, allow you to choose the best camera option. When choosing, they are guided by the estimated design of the device, the place and method of its installation, the type and size of the fireplace. You can purchase fireplace inserts from the options offered by manufacturers: Drywall is considered preferred material for the manufacture of mounted and suspended structures. But some of its brands are also suitable for non-standard applications - the construction of a full-fledged fireplace.

How modern ones do it heating structures with the use of these sheets, what they are like and how the facades are finished - we suggest you find out in this publication. decoration decorative self-adhesive film- a simple, relatively cheap option. The variety of textures and patterns allows you to choose one that suits any interior.

On sale you can find imitation marble or granite, bog oak or wenge, brick or plastered surface, straw or bamboo. First, using building level, markings are applied to the wall. The guide elements are measured, marked, cut and attached to the wall using a puncher and dowels.

The frame is usually made from metal profile, less often – wooden slats, timber. Wooden is practically not inferior in strength to aluminum or steel; it is used when it is necessary to reduce the weight of a structure to the maximum possible minimum. Metal is more expensive, but holds the shape of the product better.

1. Preparatory stage - development of a sketch, selection and purchase of tools and materials, preparation of the site.
2. The stage of creating a base, a base - the construction of a structure frame from a metal profile or timber, finishing the fireplace with plasterboard.
3. Finishing - decoration appearance false fireplace, working with the firebox, creating a suitable space around it through the use of suitable accessories (pokers, candelabra, candles).

An original solution can be considered wallpapering the fireplace. You can choose vinyl wallpaper with high-quality relief, on which imitation brick, stone, or arbitrary ornaments and patterns will be painted. Wallpaper looks impressive on a false fireplace and goes well with the paintings on the walls of the room.

Another type of portals for fireplaces that do not have a chimney, but which have a heating element– electric and bio fireplaces. They also use plasterboard cladding. A heat-resistant analogue is used here; it differs in its composition.

Fireproof properties are enhanced by a special layer of clay and reinforcing fiberglass. In the middle part, the sheet is equipped with crystallized water up to 20 percent of the mass of the material. Externally it is easy to distinguish by pink color cardboard

The classic wall portal is easier to install constructively. For complex original flash fireplaces, a foam model is first made. For beginners, it is better to study the selections on construction sites and evaluate their capabilities.

• firebox for burning wood;
• a smoke collector through which smoke enters from the firebox into the exhaust pipe;
• portal decorated with decorative material;
• chimney guaranteeing draft

The built-in fireplace has a chimney and firebox in the masonry of the wall, which involves the use of a significant amount facing material. It protrudes outward in thickness by no more than half a brick. Designers prefer to use the same material for finishing such a fireplace that was chosen for wall cladding.

Cladding fireplaces with plasterboard is simple. It is not particularly difficult and can be done by anyone who wants to do it themselves.

How to install a fireplace

Cladding a fireplace with plasterboard requires some skill.

You will have to use:

• With a ruler.
• Square.
• Plumb to check the verticality of the fireplace.
• A level that will show parallelism.
• With a tape measure.
• With a pencil.
• Knife for construction.
• A hacksaw with fine teeth.
• Impact drill.
• Screwdriver for screws.

Advice. Drywall sheets must be flat. For this purpose, a load is placed on them.

Comparison table between a plasterboard fireplace and a marble fireplace:

Plasterboard fireplace	Marble fireplace
Does not require large financial outlays. It can be done quickly.	This fireplace is quite expensive. Its production will take a long time.
It is characterized by mobility and quick dismantling.	A marble fireplace is very difficult to disassemble.
It is safe because there is no open heating source.	It poses a certain danger, as a spark may hit the floor if installed incorrectly.
A plasterboard fireplace can be installed even in a small room.	A marble fireplace requires a lot of space.
A person will never get burned on a plasterboard fireplace. Furniture will also not be damaged.	Hot coals can jump out of a marble fireplace, which pose a danger to others and can ruin the polish of your furniture.

Choosing a location

Advice. For greater effect from the fireplace, you should definitely consider the presence of a decorative chimney that can complement the design of your apartment. Its basis is also drywall.

At the initial stage, make a drawing of your fireplace on paper:

• Determine the length, width and height of the future product.
• Take into account the space around the fireplace.
• This nuance is required. If there is no space, then you should resort to making a wall-mounted structure.
• Before you begin your work, draw the lines of the fireplace on the wall. A profile is attached to the lines.

This way you can make sure how the size of this design fits your interior.

How to prepare a place for a fireplace

The plane must be rigid enough to support the mass of the fireplace:

• If the floor in your apartment is made of wood, and the weight of the fireplace is quite large, then it is recommended to pour a concrete platform.
• For the base, formwork is made in such a way that the height of the platform is at least 100 mm from the floor level.
• Next, you should take into account the protection of the walls from high temperatures.
• For this purpose, as a rule, they resort to the use of aerated concrete slabs, which provide high-quality protection.

Advice. Take careful measurements of aerated concrete slabs. They must be completely covered with plasterboard sheets after installing the fireplace. Once the fireplace frame is ready, you will not be able to correct the measurement error.

• During the manufacturing process of the base, attention is paid to ensuring that the planes are parallel. The fireplace is mounted on a base, so any irregularities will affect the configuration. Be sure to use a level for construction.
• To make the box, you can resort to using a metal profile or a wooden beam. If you choose the latter, treat it with an antiseptic available in retail sales.
• Antiseptics help extend the service life of the configuration and will serve as reliable protection against rot and mold.

Remember! After processing, the material must dry thoroughly!

How to install the frame

The main thing during installation is compliance with the geometric shape.

Remember that even the slightest deviation from the norm will result in an inaccuracy in centimeters for you at the last stage of finishing.

Carry out your work very carefully:

• A frame is attached to the wall for support. For this purpose, the profile of the required size is initially cut and fasteners are made. For surfaces made of wood, you can use self-tapping screws. If the plane is brick or concrete, then the hole is made using a hammer drill. Dowels are used for connection.
• When attaching the frame to the wall, please note that you should not purchase sets of dowels. You need pacifiers and self-tapping screws, the cross-section of which is several millimeters larger than their diameter.
• Only if you follow this rule will you achieve rigidity and reliability of fastening.

• During installation, angles are checked using a square, and parallelism is checked using a construction level. The shape of the fireplace must be impeccable.
• Starts cutting drywall to size. We attach it to the frame using self-tapping screws. A mandatory rule must be followed here.
• If your fireplace is three-dimensional, then lining the fireplace insert with plasterboard is carried out in two layers. Make finishing only from solid sheets.
• If you did not take this nuance into account, you will have to make auxiliary slats in the frame. The drywall connection is carried out only on a rigid plane. The seam is processed using a serpyanka.

The finishing of the fireplace insert is carried out with precision, as described above. For safety purposes, the walls at the back and sides are covered with heat-reflecting screens.

How to decorate a fireplace

The putty should be even and smooth:

• There should be no gaps in the drywall.
• Dry putty is poured into a container.
• Water is added to it.
• The putty is thoroughly mixed.
• The mass should be without lumps. For this purpose, they resort to using a drill with an attachment.
• It is with its help that the contents will become homogeneous and similar to thick sour cream.
• After this procedure, the resulting mass is applied to the surface of the drywall.
• The putty must dry thoroughly. This was the first layer of base. The next one is applied to it.
• It should be thinner than the previous one. For this purpose, take a wider spatula.
• Achieve ideal surface evenness. After this, sandpaper is taken, which should be used to process the layers of putty.
• If cavities occur, they are filled with putty solution and leveled again.

Advice. If you decide to putty the fireplace yourself, then its corner should be treated using perforated tape. With its help, you can crush with perfect evenness.

Mantel

After the fireplace insert has been finished and the fireplace plasterboard has been lined, we proceed to the finishing stage. The price for finishing work is not too high.

Therefore, facing fireplaces with plaster or other material (ceramic tiles, decorative plastic panels, decorative stone) can be done with your own hands.

Self-cladding of plasterboard fireplaces can be done quite well if you follow the finishing technology.

An excellent solution for creating a cozy and comfortable environment in your apartment is to install a false fireplace. This decorative element will certainly dilute the interior, add exclusivity to it, and add notes of home comfort, warmth and warmth to the aura of the room. peace of mind. You can build a false fireplace from various materials, for example, in Lately are very popular; gypsum, wood and even cardboard are also often used in construction.

However, the most simple option is construction fake fireplace from plasterboard. This universal finishing material allows you to achieve excellent results with little effort. But for the fireplace to really become decorative element To make it pleasing to the eye and soul, it should be decorated. In this article we will talk about how to decorate a plasterboard fireplace, what materials will give excellent results and how to work with them.

Small classic false fireplace in the living room