For many entrepreneurs, it is extremely important to build shopping pavilion as soon as possible. But such a structure needs to be strong and reliable. You can assemble a trade pavilion with your own hands, but you will need to take into account a number of certain factors.

Choosing a site for a pavilion

Many novice businessmen do not know how to set up a pavilion in the city. To organize a trade pavilion, you will first need to choose a suitable location. This step is extremely important, since the kiosk located in good location, will bring more profit. It is better to give preference to places near residential buildings and major roads.

It is also advisable that there are no supermarkets nearby; most buyers will go there. But if the store being built will sell fresh fruits or vegetables, there is no need to fear competition from large buildings.

For a small kiosk selling food, great solution There will be a plot in the courtyard of a residential building away from shops. The people living there will be grateful and all the costs of building the kiosk will be recouped in the shortest possible time.

Rent of land for a trade pavilion

How to rent land for a pavilion? This is a rather difficult and painstaking task; you will need to be patient. Often the land on which the pavilion is planned to open is owned by the state or municipality. So it can only be rented. To do this, you will need to make a request to the city department of consumer services and trade or to the district committee of public domains.

Renting land for a trade pavilion is only possible if the businessman is registered as an individual entrepreneur or acts on behalf of an LLC. Therefore, first you will need to purchase one of these statuses. After which the procedure will be as follows:

1. The land for the pavilion is selected. You can choose a site based on personal preferences. But if many shops have already been built on it, the administration has the right to refuse.
2. Then you will need to collect documents and submit them to the administration. The documents you will need are: an application for renting a plot, a certificate of no tax arrears, drawings of future construction, certified copies of OKVED codes. The period for studying the application from the moment of its submission is 30 days.
3. Also, renting land for a pavilion requires permission from the following organizations: sanitary and epidemiological station, fire departments, environmental enterprises, traffic police, water utility.
4. If a positive decision has been made on the request and all permits have been obtained, you can proceed to the construction of the building. In this case, it will be necessary to carry out cadastral work on this site.

Interesting Facts! Rental process land plot under a trade pavilion can be significantly simplified. To do this, you will need to purchase a plot of land on any market, then all the documentation will be collected by its owners, and the businessman will act as an ordinary buyer. You can also rent a plot from a private entrepreneur, and not from the state, this will significantly simplify and speed up the opening of a trade pavilion.

Refusal to rent

If the rental request received a negative response, you will need to clarify what is the reason for the refusal. Most often, the reasons for this are the following:

• There is too much density of objects for trade in the selected area.
• The land is used by the state for urban needs.
• The site is no longer part of the turnover.

If such a situation arises, you can go to court or change your plans for choosing a land plot. The second solution will allow you to arrange the trade pavilion as quickly as possible.

Types of trade kiosks

To open the pavilion, you will need to first familiarize yourself with its views and study the nuances of their construction. Trade kiosks can be classified according to their scope of application. The following options exist:

• Pharmacy kiosk.
• Newspaper.
• Coffee house.
• Vegetable.
• Grocery store.
• Flower stall.
• Souvenir shop.
• Bread kiosk.

Also, such structures can vary in shape and size. These characteristics are selected based on the purpose of the store. If it doesn't contain a large number of goods, it is not necessary to erect a large building. For example, vegetable and flower stalls can be small in size.

There are several technologies for constructing such buildings. They differ in financial costs and time required for construction work. These include:

• LSTK technology. A method of constructing a kiosk that uses a metal frame made of wood as a base. During construction, thin-walled, lightweight profiles are used, which will help you assemble the pavilion with your own hands in the shortest possible time. These profiles can be solid or perforated. The frame can be combined with reinforced concrete-based materials.
• Sheet assembly. Such structures are installed in several stages. After the metal frame and enclosing structures are installed, all that remains is to install the external and internal corrugated sheets. After that, using self-tapping screws, the insulation is installed, and facing works. Installation using this technology is a little more complicated than the previous option, but it allows for more high level reliability.
• Using sandwich panels. Such material is purchased for the purpose of finishing the frame of the building and for its insulation. Usually ready-made slabs are used, but sometimes prefabricated structures are also used.

The technologies considered are quite often combined. Sandwich panels allow you to build a building in the shortest possible time, and they can also be used to build a large store.

Interesting Facts! For successful trading great importance has a turnover rate and the ability to open or move the pavilion as quickly as possible. Store mobility is extremely important, especially when it comes to seasonal trading. Therefore, when building a kiosk, it is recommended to give preference for light materials, but with good strength.

Pavilion construction procedure

In order to build a pavilion with your own hands as quickly as possible, it is recommended to use sandwich panels. Their installation is quite simple, so the work can be done without the help of specialists. Quite often, such buildings do not even require a foundation.

Interesting Facts! When constructing a pavilion, it is recommended to pay attention to the filler of the panels used. It is best to choose the category of fire-protected materials; this will be indicated by a special designation on the packaging. The fact is that kiosks often become victims of hooligans, so their fire safety must be at the proper level.

How to make a pavilion with your own hands? The lightness of the material, the weight of which can vary from 30 to 80 kg, and ease of installation allows you to do all the work yourself. For buildings small size no foundation required, it will be fairly level concrete surface. The help of construction equipment is also not needed. The procedure for constructing the pavilion is as follows:

• To build a shopping pavilion with your own hands, you will need to use drawings. The kiosk project can be ordered from construction company, find it on the Internet or calculate it yourself if you have the necessary skills. Often calculations are made based on the characteristics of the panels used, but since this material is difficult to adjust, it is better to give preference standard slabs. The following drawings can also be used.

• The foundation is being built. If the construction will be carried out on a flat concrete surface, it can be abandoned. Since a kiosk made of sandwich panels is light in weight, a lightweight, shallow strip base or a strip-column base will suffice. The construction of the base consists of digging a pit, installing formwork based on boards and filling it concrete mortar. For a strip-column foundation, you will also need to install piles.
• A metal frame is being erected. First of all, the wall and roof are assembled separately. The profile width is selected based on the calculation of the pressure on the building. You will also need to take into account that the frame structure has a large windage, because of this the load increases. After which the walls and roof are connected.
• The wall installation process starts from the corners. When connecting the panels, they spread between them thermal insulation materials, the formed seams are filled with foam. The plates are fastened using self-tapping screws. For safety and integrity window openings can be used .
• Roof sheathing is done in a similar way, but to work with it we use roofing sandwich panels. For sun protection functions in such designs the following are used: , .

After all construction procedures are completed, the pavilion can be filled with goods and all necessary equipment and gradually move on to its discovery.

For a beginner entrepreneur without experience and a large amount of funds a good option may be the opening of a stall. Managing such a business is not difficult, so you can keep your job. Although the level of competition in trade is not encouraging, it could be the beginning of more big business, if you take advantage of: the ability to determine working hours convenient for clients and individual approach. The likelihood of success increases if a unique product is selected.

Many people dream of starting their own business; the main area is trade. The stall can be installed indoors (shopping center, train station or metro station) or outdoors, built, purchased, . If the kiosk is indoors, there is no need to spend money on a heating device, and the level of security increases. But rents are higher and there are almost no vacant buildings.

If a business is opened without partners, you need to register an individual entrepreneur, which has a number of advantages:

• minimal costs when preparing documentation
• simple accounting
• convenience of taxation

Registration is carried out locally permanent place residence. It is quite possible to go through the procedure yourself. But if in doubt, it is better to involve specialists.

Important! It is worth considering that in large cities, since 2018, multifunctional centers have been registering individual entrepreneurs.

Before going to the center or inspection, you must select the type of taxation (), determine (47.8), and pay the state duty (800 rubles). The simplified tax system involves 2 methods of calculating tax: 6% of the amount received at the cash desk, or 15% of the difference between income and expenses. The state duty can be paid at a bank or on the Tax Inspectorate website.

To register you need:

• application (form P21001)
• application for the application of the selected taxation
• passport
• (if there is evidence)
• receipt certifying payment of the duty

Individual entrepreneur status is provided after 3 days. 2 certificates are issued: on enterprise registration and tax registration, and. The data is sent to the Pension Fund and the Federal Compulsory Medical Insurance Fund by a tax officer, and certificates are sent by mail.

But this is only the first step if you buy finished design or build. You will need to rent a plot of land, which is registered with the municipality (administration). If the settlement is large, tenders are organized. Small towns have fewer problems. Permission for installation is issued by the Department of Architecture, approval is required from the Department of Trade.

After installing the kiosk, you need to coordinate the documentation with Rospotrebnadzor and firefighters in order to receive a sanitary passport certifying that all standards have been met. In some populated areas It is mandatory to conclude contracts for disinfection and disinfestation, garbage removal or disposal lighting fixtures containing mercury. There are products whose trade requires a license.

If a salesperson is hired, he must have a health certificate.

Selecting a location

When deciding how to set up a stall in the city, two approaches are used:

• products are selected, then the optimal location for it is selected
• a vacant building with an acceptable rent is selected, then it is determined which trade item is suitable for a particular location

Beginning entrepreneurs choose products that they know something about. First, it becomes clear which suppliers exist and at what prices they sell. The disadvantage of this method is the likelihood that a place will not be found soon.

The arrangement of the premises depends on the type of product. If food is sold, a refrigerator is required. In any case, sellers cannot do without shelving, display cases, scales, a cash register, a table and a chair. If there is no heating system, winter period will have to use electric heater. In a highly competitive environment, a bright sign is desirable.

Calculating opening costs

If we consider financial side such a project, it should be noted that the amount of initial investment depends on several factors:

• settlement size
• forms of ownership
• type of trade item and purchase prices
• work schedule

In a large city, the initial investment will be higher due to higher land and structure rents. The price for an independent or purchased building depends on the area and materials used in the manufacturing process. The price of equipment is higher if products are sold that require the purchase of a refrigerator. The purchase price is higher for licensed and special goods. The amount of salary costs depends on the work schedule.

Average initial investment:

Cost type	Price (thousand roubles.)
In the process of organizing a business	15 – 30
Pavilion cost	35 – 150
With registration	5 – 7
Electric heater (if there is no heating)
Furniture, window displays	10 – 20
Stationery and opening expenses (flyers, balloons, etc.)
Household goods, equipment and accessories (gloves, bags)
Purchase of sold products	20 – 30
Total	145,5 – 297,5

If you believe statistical data, buyers contribute up to 50 thousand rubles monthly to the cash register of one tent, net profit 20 thousand rubles. In practice, everything depends on the owner’s approach.

If the sellers are friendly, the demand for products is high, discounts are applied for regular customers, the income is good. The payback of the stall and equipment depends on their cost. The structures pay for themselves in about a year, the equipment in 2-3 months. If the kiosk doesn’t have engineering communications, you will have to spend another 30-50 thousand rubles. When trading drinks or perishable goods, it is mandatory refrigeration equipment, the cost of which is 5-10 thousand rubles. As a result, the amount of initial investments can reach 240.5-495 thousand.

At the opening stage, it is important to choose the right suppliers. Main criterion– reliability. Timely delivery and honesty in payments are required.

You need to pay attention to:

• popularity of brands
• breadth of assortment
• purchase price

No less important are such nuances as the possibility of receiving products for sale, bonuses and discounts.

A business will not make a profit if:

• the range does not correspond to demand (too wide or vice versa)
• prices are above average on the market
• Working hours are inconvenient for customers
• the owner strives to buy products cheaply, without paying attention to quality
• illiterate salespeople who don’t want to work were hired

If trading is not going well, it is advisable to review the work schedule and change it. Trade volumes can increase if you open earlier and close later.

If the kiosk is near a shopping center, the products should be completely different or favorably differ in price. It's worth going around the nearest ones outlets and set a price that is at least a couple of rubles different from competitors. It has long been known that those who became rich were not those who sold high, but those who sold a lot.

To sell unusual or specialized products good option can be . IN similar situation the pavilion will serve as a pick-up point.

Write your question in the form below

✓17 years in the market for manufacturing stainless steel products

Railings and fences made of stainless metal are the most popular, inexpensive and practical option for stairs. Despite their low cost, they serve their intended purpose, providing safety and convenience when ascending and descending. They are widely used in buildings for various purposes, from office centers to personal apartments, private houses and administrative premises.

The FOX company is a diversified commercial enterprise. Our company with a powerful production base, which for more than 10 years has been designing and installing turnkey, manufacturing, as well as selling high-quality balcony railings and of stainless steel, balconies, stair railings, wide range of metal architectural and interior components.

The range of services provided by FOX to its clients includes: design, engineering, installation and installation metal fencing. The company also produces and sells components for railings, fences and thematic structures.

Only we offer railings made of real Italian stainless steel, which give the staircase a special charm, durability, strength and aesthetics. They go perfectly with stone and wooden steps. Naturally, stair railings must first of all perform the function assigned to them, and only then shine with their beauty, but practicality in combination with aesthetics will become the best option modern railings. And if the task is to decorate the front entrance, then the stair railings produced by the FOX company will do the job.

The company specializes and manufactures stair railings in Kyiv, stainless steel handrails, stainless steel railings (stainless steel), combined railings for balconies, pools, stairs, atriums, ramps. Our company also produces structures such as canopies, canopies, columns and many other configuration options for products made of stainless steel and other metals. Our company's team consists of qualified specialists with many years of experience work in this area. The main goal was determined at the time of the creation of the company - the production and sale of products that create a feeling of safety and comfort, convenience and dynamism, of the highest quality.

Our company offers customers durable, reliable and beautiful fences, stairs and balconies made of stainless steel, which are installed in multi-storey buildings and bunk apartments, hotels, schools, universities. Balcony fencing, roof fencing (roofs), finished with glass or plastic, glass holders, canopies and canopies made of stainless steel, external and internal glass fencing. The doors of our company are open to every client!

Are you opening your own small business? Do you want to set up a stall to sell newspapers, food or flowers, clothes or other goods?

Let’s try to figure out what material to build a stall from so that your business can quickly pay for itself and generate income.

As with modern frame-modular technology, it is beneficial for the entrepreneur. Today, almost every kiosk or stall is a frame metal structure.

Metal frame - a reliable basis for the structure

The frame is the skeleton of a kiosk or any other structure, which consists of profile pipes, channels, and corners. The frame ensures the strength of the entire kiosk structure. It must be rigid and coated with an anti-corrosion compound.

• As a result, the kiosk can withstand mechanical loads well;
• It can be transported repeatedly to a new location;
• It will serve you reliably for many years.

Features of the kiosk frame

The kiosk frame has a reinforced lower belt (base). For a small kiosk, up to 3 m wide, use corners. For a larger kiosk - a channel. To give the base greater rigidity, there is an additional crossbar for every meter. The frame design uses pillars. All elements are connected by welding.

The upper chord of the frame serves as the basis for the roof. A beam-lintel of the upper chord is placed for each meter. A galvanized profile sheet is laid on the floor.

What's the secret: how to build a warm and cozy kiosk

What to build a kiosk from so that it is durable, practical, visually presentable and inexpensive?

The main secret to having a warm and cozy, comfortable and practical kiosk lies in sandwich walls.

• Due to their properties, such panels have become the basis for the construction of kiosks,
• warehouses,
• stalls and pavilions,
• public buildings and
• shopping centers
• and many other buildings and structures.

Two design options for sandwich walls

• Prefabricated walls . The walls can be manufactured in production conditions in the form of sandwich panels. Such panels are completely ready for installation; they are delivered to the site and quickly assembled on site into a ready-made kiosk. Typically, a sandwich panel has two skins made of metal sheets (0.4-0.7 mm) and an insulating filler inside.
• Layer-by-layer production of walls. The second option is a prefabricated structure with layer-by-layer production of sandwich walls. First they install the frame, then sheathe it facing material. Insulation with a layer of steam insulation is placed on the inside. It's all closing down interior decoration walls Siding or profiled sheets are installed outside.

Kiosk covering

What is the best way to cover a stall? To make your kiosk look presentable and solid, practical and reliable, choose high-quality cladding. On the inside it can be MDF, chipboard, OSB sheet or wood, on the outside it can be aluminum composite panels, profiled sheet or siding.

What you need to build a kiosk with your own hands

To build a kiosk with your own hands, you will first of all have to purchase required quantity materials and find a place convenient for assembly, protected from precipitation. You not only need to have a clear idea of ​​how to build a stall with your own hands, but also be able to properly weld all the seams, insulate the walls, floor, roof according to all the rules, and install wind protection. Work must be performed efficiently, in compliance with all technical requirements. This will ensure that your pavilion or kiosk will be reliable, warm in winter, and therefore economical.

The specialists of our company “ARTMETAL UKRAINE” will tell you how to build a kiosk, what material to choose for construction. But to save your time, you can order from us the construction of a kiosk in Ukraine from design to installation - urgently and inexpensively.

Most kiosks are frame metal structures consisting of profile pipes, angles, and channels. The frame is a kind of skeleton of the kiosk. It must be rigid to withstand the load during construction and transportation.

Bottom chord of the frame (base). With a kiosk width of 3 or less than a meter corners are used. When the width of the kiosk is more than 3 meters, a channel is used. At the base there is an additional crossbar for every meter for greater rigidity.

Frame racks (pillars). The most commonly used are corners. The main ones are placed in the corners - 4 pieces. Connecting everyone metal structures produced by welding.

There are two types of frame, depending on what the walls will be made of. First type: wall made of factory-made sandwich panels - frameless. Second type: prefabricated sandwich panel - frame (layer-by-layer production). First, a timber frame is installed, then the outside is sheathed with any facing material. A wind-moisture-protective film is stretched under the cladding. On the inside there is insulation, which is covered with a vapor-insulating film. All this is covered with interior wall decoration.

When installing walls using layer-by-layer assembly, additional racks from profile pipe to stiffen the doorway. When installing walls using sandwich panels, the frame consists of corners with installation of frames from corners in places where window openings are installed. A closed frame is made from corners covering the entire window. Also done on the door.

Upper frame chord (roof base) It is made from a corner or channel depending on the size of the kiosk (pavilion). Beam - jumper of the upper chord. Placed on every meter. Most often it is made from a profile pipe. Additional timber beams are also installed. Acts as a lathing, and is a support under the prof. flooring.

Floor. The lowest layer of the floor is galvanized professional. sheet. Insulation – expanded polystyrene – is laid on it. Next, a board is laid as a subfloor. There is a leveling screed made of chipboard on it. A covering is laid on it - linoleum, laminate, etc. All this is secured with a plinth.

Overlap. Cladding material – professional flooring, plastic panels. Next comes the timber frame on which all this is attached. The beam cells form a beam network and are filled with insulation. On top everything is covered with a profiled sheet, galvanized or painted.

As you can see, making a kiosk or pavilion with your own hands is not the easiest thing. You need to purchase a large amount of materials, find a suitable place for manufacturing, protected from precipitation, so that during assembly water does not get inside, which makes the insulation unusable. You need to have some experience in order to qualitatively weld all the seams, properly insulate the walls, roof and floor, and install wind protection. All this work must be done with high quality, as this is the guarantee that in winter your kiosk or pavilion will be warm, and therefore economical.

But the most valuable resource is time. Experienced craftsmen can make a kiosk in less than 10 days, but for an inexperienced builder it can take a month or more. Time is very important in any business, and when building a kiosk it is very expensive, since the sooner the kiosk starts operating, the sooner it will begin to make a profit.

What other advantages could there be in working with the professional company “Vavilon-Omsk”?

A correctly drawn up project for a mobile structure is a guarantee that you will receive exactly the project that will meet your requirements. For each object there is a technical certificate. In addition, if shortcomings are identified during operation, or for some reason a double-glazed window breaks - competent service maintenance will help you quickly fix all these problems.

Therefore, making a kiosk or pavilion in our company will ultimately cost you more than making it yourself.

We offer you to buy ready-made drawings of pavilions of various sizes.

Order a drawing of the pavilion or kiosk you need!

Advice from an Expert - Business Consultant

Photos on the topic

When starting a business, everyone wants to save money, and this is quite reasonable. One of the ways to save money when opening a stall is to build your own premises. To make a stall yourself, you need to know some points.

Just follow these simple ones step by step tips, and you will be on the right track in your business.

Brief Step-by-Step Business Guide

What you need to have: - metal pipes;
- galvanized sheet;
- chipboard;
- polystyrene foam;
- others Construction Materials at your discretion.
So, let's get down to action, setting ourselves up for a positive result.

Step - 1
The simplest and cheapest stall is a welded frame one. To build it, you first need to install a frame. The best material metal pipes are used for it, because other materials (channel, profile) will not provide your stall with the required strength. Having done this, move on to the next steps.

Step - 2
Now pay attention to the bottom of the frame, it will be three-layered. It should be sheathed with some kind of moisture-resistant material: for example, galvanized sheet or rubimast. This is necessary to protect the interior from the harmful effects of moisture. Next layer - chipboards, and the third layer is a coating of your choice. Having done this, move on to the next steps.

Step - 3
Then the finished frame should be sheathed. For cladding, you can use galvanized corrugated sheet. It can also be used as a roofing material. Having done this, move on to the next steps.

Step - 4
For finishing interior space It is best to use chipboard. The thermal insulation material for the kiosk is polystyrene foam or mineral insulation– it will protect from moisture and cold. Having done this, move on to the next steps.

Step - 5
The kiosk door should also be lined with insulation to prevent drafts. Having done this, move on to the next steps.

Step - 6
The kiosk display windows can be made of double glazing. Make sure they can be closed metal shutters. This will protect your kiosk from unexpected guests. Having done this, move on to the next steps.

Step - 7
Now that the kiosk premises are done, the most important thing is to install electricity, install sockets and switches.

We recommend that you pay attention to following tips Business consultant:
The kiosk must be installed at some distance from the ground to avoid moisture and freezing. Suitable for this concrete blocks or a small brick foundation.

Additional information and useful tips Business expert:
The kiosk can be sheathed not only with galvanized corrugated sheets, but also with PVC panels (lining). Both materials are durable and strong.

As a floor covering, you can use corrugated aluminum sheet or linoleum.

Corrugated sheet– durable material, resistant to various kinds impacts, highly environmentally friendly.

Linoleum can be baseless or with a base. The first option has good moisture resistance and a low price. Linoleum on the base is more expensive, but at the same time much stronger.

We hope the answer to the question contains information useful to you. Good luck! To find the answer to your question, use the form -

For many entrepreneurs, it is extremely important to build a trade pavilion as soon as possible. But such a structure needs to be strong and reliable. You can assemble a trade pavilion with your own hands, but you will need to take into account a number of certain factors.

Choosing a site for a pavilion

Many novice businessmen do not know how to set up a pavilion in the city. To organize a trade pavilion, you will first need to choose a suitable location. This step is extremely important as a kiosk located in a good location will bring more profit. It is better to give preference to places near residential buildings and major roads.

It is also advisable that there are no supermarkets nearby; most buyers will go there. But if the store being built will sell fresh fruits or vegetables, there is no need to fear competition from large buildings.

For a small kiosk selling food, an excellent solution would be a site in the courtyard of a residential building away from shops. The people living there will be grateful and all the costs of building the kiosk will be recouped in the shortest possible time.

Rent of land for a trade pavilion

How to rent land for a pavilion? This is a rather difficult and painstaking task; you will need to be patient. Often the land on which the pavilion is planned to open is owned by the state or municipality. So it can only be rented. To do this, you will need to make a request to the city department of consumer services and trade or to the district committee of public domains.

Renting land for a trade pavilion is only possible if the businessman is registered as an individual entrepreneur or acts on behalf of an LLC. Therefore, first you will need to purchase one of these statuses. After which the procedure will be as follows:

1. The land for the pavilion is selected. You can choose a site based on personal preferences. But if many shops have already been built on it, the administration has the right to refuse.
2. Then you will need to collect documents and submit them to the administration. The documents you will need are: an application for renting a plot, a certificate of no tax arrears, drawings of future construction, certified copies of OKVED codes. The period for studying the application from the moment of its submission is 30 days.
3. Also, renting land for a pavilion requires permission from the following organizations: sanitary and epidemiological station, fire departments, environmental enterprises, traffic police, water utility.
4. If a positive decision has been made on the request and all permits have been obtained, you can proceed to the construction of the building. In this case, it will be necessary to carry out cadastral work on this site.

Interesting Facts! The process of leasing a plot of land for a retail pavilion can be significantly simplified. To do this, you will need to purchase a plot of land on any market, then all the documentation will be collected by its owners, and the businessman will act as an ordinary buyer. You can also rent a plot from a private entrepreneur, and not from the state, this will significantly simplify and speed up the opening of a trade pavilion.

Refusal to rent

If the rental request received a negative response, you will need to clarify what is the reason for the refusal. Most often, the reasons for this are the following:

• There is too much density of objects for trade in the selected area.
• The land is used by the state for urban needs.
• The site is no longer part of the turnover.

If such a situation arises, you can go to court or change your plans for choosing a land plot. The second solution will allow you to arrange the trade pavilion as quickly as possible.

Types of trade kiosks

To open the pavilion, you will need to first familiarize yourself with its views and study the nuances of their construction. Trade kiosks can be classified according to their scope of application. The following options exist:

• Pharmacy kiosk.
• Newspaper.
• Coffee house.
• Vegetable.
• Grocery store.
• Flower stall.
• Souvenir shop.
• Bread kiosk.

Also, such structures can vary in shape and size. These characteristics are selected based on the purpose of the store. If it contains a small amount of goods, it is not necessary to build a large building. For example, vegetable and flower stalls can be small in size.

There are several technologies for constructing such buildings. They differ in financial costs and time required for construction work. These include:

• LSTK technology. A method of constructing a kiosk that uses a metal frame made of wood as a base. During construction, thin-walled, lightweight profiles are used, which will help you assemble the pavilion with your own hands in the shortest possible time. These profiles can be solid or perforated. The frame can be combined with reinforced concrete-based materials.
• Sheet assembly. Such structures are installed in several stages. After the metal frame and enclosing structures are installed, all that remains is to install the external and internal corrugated sheets. After that, using self-tapping screws, the insulation is installed and the facing work is carried out. Installation using this technology is a little more complicated than the previous option, but it allows for a higher level of reliability.
• Using sandwich panels. Such material is purchased for the purpose of finishing the frame of the building and for its insulation. Usually ready-made slabs are used, but sometimes prefabricated structures are also used.

The technologies considered are quite often combined. Sandwich panels allow you to build a building in the shortest possible time, and they can also be used to build a large store.

Interesting Facts! For successful trade, the speed of trade turnover and the ability to open or move a pavilion as quickly as possible are of great importance. Store mobility is extremely important, especially when it comes to seasonal trading. Therefore, when constructing a kiosk, it is recommended to give preference lightweight materials, but with good strength.

Pavilion construction procedure

In order to build a pavilion with your own hands as quickly as possible, it is recommended to use sandwich panels. Their installation is quite simple, so the work can be done without the help of specialists. Quite often, such buildings do not even require a foundation.

Interesting Facts! When constructing a pavilion, it is recommended to pay attention to the filler of the panels used. It is best to choose the category of fire-protected materials; this will be indicated by a special designation on the packaging. The fact is that kiosks often become victims of hooligans, so their fire safety must be at the proper level.

How to make a pavilion with your own hands? The lightness of the material, the weight of which can vary from 30 to 80 kg, and ease of installation allows you to do all the work yourself. For small buildings, a foundation is not required; a flat concrete surface will suffice. The help of construction equipment is also not needed. The procedure for constructing the pavilion is as follows:

• To build a shopping pavilion with your own hands, you will need to use drawings. The kiosk project can be ordered from a construction company, found on the Internet, or calculated with your own hands if you have the necessary skills. Often calculations are made based on the characteristics of the panels used, but since this material is difficult to adjust, it is better to give preference to standard slabs. The following drawings can also be used.

• The foundation is being built. If the construction will be carried out on a flat concrete surface, it can be abandoned. Since a kiosk made of sandwich panels is light in weight, a lightweight, shallow strip base or a strip-column base will suffice. The construction of the base consists of digging a pit, installing formwork based on boards and filling it with concrete mortar. For a strip-column foundation, you will also need to install piles.
• A metal frame is being erected. First of all, the wall and roof are assembled separately. The profile width is selected based on the calculation of the pressure on the building. You will also need to take into account that the frame structure has a large windage, because of this the load increases. After which the walls and roof are connected.
• The wall installation process starts from the corners. When connecting the panels, thermal insulation materials are laid between them, and the seams formed are filled with foam. The plates are fastened using self-tapping screws. For safety and maintaining the integrity of window openings, you can use.
• The roof sheathing is done in a similar way, but roofing sandwich panels are used to work with it. For sun protection functions in such designs the following are used: , .

After all construction procedures are completed, the pavilion can be filled with goods, all the necessary equipment can be imported and gradually proceed to its opening.

In this article we will exclusively touch on the construction part of the process, leaving the permitting and documentary part behind the scenes. Trade pavilion - in our case it is a small architectural form (SAF) up to 30 square meters. We'll consider step by step instructions construction.
It is better to make a strip foundation - reinforced concrete. Since it will not be designed for a large load, a trench is dug under the foundation with a depth of 2 shovels, the depth is the width of the shovel. To save money and time, the foundation must be poured immediately at the required height. Therefore, you need to make formwork over the dug trench required height. Inside the foundation you need to make a bandage of reinforcement. For such a foundation, it is enough to make 2 racks of 8 mm reinforcement every one and a half meters. And put the same reinforcement through them - two from below, two from above. On the racks, make crossbars at the bottom and top like the letter “T” and tie them to them! knitting wire longitudinal reinforcement. Pour concrete using a mixer. In this case, it may seem expensive to hire a mixer and buy ready-made concrete. But you need to take into account that the whole process takes about 2 hours, and the mixer is ordered for an hour. And making concrete using a concrete mixer will require hiring workers for several days, purchasing and delivering sand, cement, and water. In the end, everything will take more time, money and nerves. Immediately after pouring, you need to insert several reinforcement bars around the perimeter into the foundation in order to later attach the pavilion frame to them.
After the foundation has hardened, you need to level the area inside it, then cover it with 5-10 centimeters of sand and compact it tightly. Then cover the area with expanded clay. To reduce the cost, expanded clay can be replaced with floor foam, although there are known cases of laying the floor as insulation with ordinary wall foam, which is cheap and, as practice has shown, reliable. After leveling the floor, 5 cm of polystyrene foam. lies on it welded mesh the diameter of the point is 10 cm. The mesh sheets are tied together with knitting wire. 10 cm of concrete is poured on top, level with the foundation. After installing the pavilion frame, all that remains is to lay the tiles - and the floor is ready.
Walls for small ones architectural forms mainly made from metal frame, sheathed with profiled iron. For the frame, a square pipe measuring 40x40 or 60x30 mm is often used. The walls need to be insulated mineral wool. It is not recommended to insulate walls with polystyrene foam (expanded polystyrene), since it is very flammable and (when burned) very toxic. The total thickness of the insulation must be at least 12 centimeters. Inner side the walls can be made of plasterboard, which has more beautiful view, or for example from plastic lining. Profiles for plasterboard are screwed to the iron profile, hangers come from them, and through the distance required for the insulation, again profiles to which the plasterboard is attached directly. If you want to build a very high-quality trade pavilion, then it is better to contact the appropriate construction company. There is construction of shopping pavilions here.
Roof. The bars are sewn longitudinally to the truss. The silk is sewn on them perpendicularly, close to the distance of unevenness. Roofing material is nailed to it with roofing felt nails. You need to screw profiled iron onto the top using blood screws. This is easy to do and the roof is cheap and practical.
The windows used for this type of construction are metal-plastic with three panes, which improves their frost resistance. Entrance door, depending on the location of the pavilion, it can be either iron or metal-plastic, covered with roller blinds. And of course it’s good to do it