Surely, every man in his youth, during labor lessons, more than once had to make some object out of wood, standing for more than one hour at such a device.

And now, having become an adult, and creating beautiful and practical works from wood, you are thinking about purchasing your own carpentry workbench. My advice to you is that you shouldn’t spend money, it’s better to spend a little personal time and get quality time in return.” workplace».

So, what is a “carpentry workbench”? It is stable, solid (often made of wood), the purpose of which lies in the processing of all kinds of products using hand and mechanized tools.

If you are seriously thinking about making a workbench, you should note that there are several types:

Wood or metal?

First of all, before you start creating your own workbench, you should think about what material it will be made of. Wooden base would be appropriate if the intended work zone will not take up much space.

The ideal option for the countertop would be laminated chipboard or pressed plywood.. For a stationary sample, a combination of planed wooden planks and metal.

Advice: an old one will work well as a base unnecessary table, or quality door made from solid fabric.

It is not advisable to make a workbench from metal, an acceptable compromise would be a wooden lid and frame with metal sheathing.

It is best to use not one or two vices, but as many as possible. Using some, secure without special effort long boards, while others are suitable for attaching small parts.

Dimensions and drawing

Before we start manufacturing, we need to think about its design, dimensions, and purpose. To manufacture parts and assemble the table, you will need to make a drawing. We indicate all the data on it with millimeter accuracy. Next, you will often have to use the drawing in the process of manufacturing individual elements and when assembling the product.

Advice: when drawing up a drawing, focus on the tabletop size of 1600x800 and a height of 870 mm.

Tools

What set of tools will the master need:

Of course, the list may vary depending on what material you decide to choose for the base of the workbench, and what design it will be.

Reference: It is extremely important to decide on the height of the workbench at the very beginning. For an experienced master It will be possible to make a device with an adjustable height; others are advised to focus on the distance from the extreme point of the arm bent at the elbow to the floor.

How to do it?

Manufacturing

This process occurs in several stages, the first of which is the base assembly. This is followed by installation of the countertop and installation of all necessary equipment.

Let's prepare vertical supports and jumpers, drill a through hole in a horizontally located block. Then screw the nut and washer onto the bolt from the groove side. We install jumpers in the middle of the tabletop (there will be drawers between them), and slats are attached to them. The workbench cover will be bolted in place.

Workbench base – wooden frame(it is recommended to use soft wood for their manufacture: linden or pine), the fastenings of which must meet all the requirements of rigidity and stability. That is why, between the legs of your desktop in horizontal view a jumper should be placed, and a drawer should be installed along the entire length. They must be secured at a safe distance from the floor (50 cm). This extra space can be useful in the future, and you can easily place small shelves or drawers at the bottom of the workbench.

Then we move on to the stage tabletop constructions. This can be done using several boards, but in this case they must be carefully processed, cleared of debris and sawdust. Its dimensions must exceed the width and length of the base. This solution is necessary for your convenience. This way the work area can be easily cleaned. The tabletop is fixed to the boards located on the opposite side of the workbench being created. Installation of the bars is simply impossible without several grooves (slots, joints) located in the base.

We cover the working surface we have created with a vice. To do this, we construct a plywood spacer from the wrong side, mark with a pencil or pen where the future holes will be. We drill them and attach the vice with nuts.

When we create the stops, adjust them in height, position them sufficiently long distance from a vice. Such care will ensure guaranteed reliability, and you will be sure that the workpieces will remain on the surface without falling to the floor.

We also construct, they can be mounted on the support of the subsurface space.

Let's start creating drawer guides, which will subsequently serve as storage for all tools and large items. For them we take the back part of the workbench and make recesses.

We nail a couple of transverse bars to the base of the tabletop; grooves must be left for them prematurely. We attach slats horizontally to the jumpers; they will serve for the process of sliding the drawers.

We attach the tabletop to the base with bolts. Using a chisel, we make indentations, drill the indicated places, and then there will be bolts there. It is necessary that their heads do not cause injuries, so they are securely hidden in the countertop.

Assembly

A certain number of vices will need to be attached to the structure. Openings are prepared in advance for them, under which small plywood spacers are subsequently secured.

Be careful, place the vice at the same level to prevent destruction of the workbench.

We place the attachment points, after which we can start attaching the tools. Hardware is perfect for this.

Important: It is under no circumstances recommended to place the vice close to the corners of your table, otherwise there is a risk of the tool falling off.

It is easy to make supporting elements with your own hands. To do this, simply fix ready-made stops, or drill small openings of a certain size.

Attention: It is not advisable to use bolts as stops; they can damage parts, and dowels are unreliable. Create rectangles, they will serve as ideal and reliable fasteners. Secure the block to the end of the workbench.

Take into account the fact that quite heavy and massive things will subsequently be placed on the countertop, such as:

• wooden clamps;
• turning equipment;
• milling element;
• drill (stationary).

Therefore, it is so important to make sure that the fastenings are reliable and to think through all the options for convenience, so that you do not have to regret the location of certain devices in the future.

Finishing

The finished product can be tidied up using a grinder. After that, cover the entire surface of the desktop with drying oil as a protective and primer layer for paint. This way you will protect yourself from getting splinters and reduce the risk of injury.

Finally, you screw the corners (with bolts) at the base.

It would be more correct to install such a structure in an area of ​​natural light, that is, near a window. Take care of additional lighting of the workplace, also do not forget that there should be sockets next to the workbench; in such a situation, an extension cord can “save” you. The most comfortable time spent at a workbench will be if the table is not too high and the light falls from the left or from above.

Photo

Creating furniture is an individual process. You may well end up with something beautiful and convenient:

Useful video

The step-by-step manufacturing process is described in detail in the following video:

Conclusion

Having appeared on the farm, he will become an indispensable assistant and over time, you will see this for yourself. Firstly, a do-it-yourself workbench is a significant savings Money. Secondly, you, as a specialist, acquire practical skills. Thirdly, you will always have a convenient table “at hand” on which you can create interesting and useful household items.

In contact with

The main object in a workshop or garage, around which the rest of the work area is arranged, is the workbench. Most often, they organize a workbench with their own hands from wood or other available materials. Purchase finished product It won't be cheap, so it's better to make it yourself. This way you can not only save money, but also organize your garage table in strict accordance with your needs for placement and functionality.

Purpose of the workbench

A workbench is a table that is designed for work on the manufacture and installation of products made of metal, wood and other materials. Often, workbenches are additionally equipped with shelves and drawers for storing accessories and tools, and equipment for fastening workpieces. Based on the intended purpose of the workplace, a distinction is made between metalworking and carpentry workbenches for working with metal and wood, respectively.

Work tables for garages and workshops can be either multi-seat or single-seat. Workbenches, which are designed for one workplace, are usually within 0.8 m wide and up to 1.5 m long. The parameters of multi-seat locksmith tables grow in accordance with the number of craftsmen working at them. Interval work surface from the floor, as a rule, is 0.8−0.9 m, but there are also designs with adjustable height.

The workbench designs themselves are most often made of wood or metal, and their countertops are covered with sheets of materials such as:

• plywood;
• hardboard;
• galvanized sheet;
• boards, etc.

Equipment manufacturing instructions

It doesn’t matter what it is made of, the main thing is that it has the necessary functionality, is reliable and durable. Its designs do not require the use of expensive equipment or the use of any scarce parts, and during the installation process you can get by with minimal plumbing and carpentry skills.

Wooden workplace

Creating a carpentry workbench with your own hands contains a lot of advantages, which consist in the fact that you can arrange in advance the locations of the vice and other devices, think about the location and quantity drawers and so on.

For self-production workbench You will need to prepare the following tools:

When stocking up on materials, be sure to pay attention to the integrity wooden parts- they should not have knots or cracks. To get started, you will need:

• Bars for the main legs 100 by 100 mm.
• 2 plywood sheets at least 20 mm thick (allowed OSB application). One sheet will go on the bottom shelf, and the other on the table top.
• The boards are 50 by 150 mm, from which the frame will be mounted.
• Bolts (it is preferable to use furniture bolts with a square part - they effectively prevent their mobility in wooden parts).
• Nuts and washers.
• Self-tapping screws.

To facilitate assembly and avoid errors when cutting material, it is advisable to make drawings of the future workbench and indicate on them all the parameters of each part.

Sequence of work

First of all, you need to make the upper frame of the underframe. In accordance with the drawing, boards of the required length are sawn off.

Using self-tapping screws, short and long parts are attached in such a way as to create a frame rectangular shape. Then by long side measure the distance to its middle and install a spacer bar in a deliberate place. As such, the same board 50 by 150 mm is used, it is attached to the frame with self-tapping screws at both ends.

The support legs for the workbench are made of six bars of the same size. To fasten them to the upper frame, long bolts with washers and nuts are used. To install the support, place the block in the corner of the frame and drill 2 through holes through the side board and the leg. After this, the connections are tightened using nuts and bolts.

To achieve the required structural rigidity, lower boards are installed. By the way, the same the parts will also form the base of the lower shelf. For this purpose, 4 wooden parts with a cross-section of 150 mm are sawn off in full accordance with the drawings.

In order to secure the bottom boards, measure 30 cm from the end of each support. At the measured height, one part is attached to the three rear legs of the structure, and on the front side, the board is attached between the side and middle support on the side in which the additional shelf will be installed.

Several short boards are mounted at the same height along the side edges of the workbench.

Using an electric jigsaw or hacksaw, from plywood or OSB sheets cut elements for the tabletop. It will be fixed flush to the upper area of ​​the desktop with self-tapping screws. To protect the surface of the workbench from damage, a layer of hardboard is placed on top of the plywood, which can be easily replaced with a new one as it wears out. To mount the bottom shelf, measure the distance from the outer to middle legs. The material is cut to this size using a hacksaw or jigsaw, and cutouts are created in its corners for the support legs. Attaching the sheet to the lower base is carried out in the same way as installing a table top.

To achieve stability of the frame structure, a carpenter's square must be used when installing and securing the supports when assembling the workbench frame. After installation of the structure bubble level measure accuracy the horizontality of its location. If necessary, the level can be changed by placing small pieces under the legs thin plywood.

Upon completion of assembly, the workbench is impregnated with a special protective compound and painted or varnished.

Making an outdoor workbench for working on fresh air- in a country house or in the courtyard of a private house, in general, it is no different. The only thing worth considering is portability and foldability. A folding workbench may be appropriate if there is not enough space for technical premises.

However, given the specifics of outdoor placement, it is necessary to take care in advance about the stability of the place where the workbench is placed, as well as its sufficient protection from weather conditions: it will need to be placed under a canopy, and the structure itself will need to be covered with special protective compounds.

Home craftsmen sawing off wooden blanks on a stool - sooner or later they come to the need to make their own workbench for carpentry work. When performing simple tasks, you can get by with a universal work table and a couple of good clamps.

If you are serious about carpentry, you need the appropriate equipment. It doesn’t matter whether you make custom-made products or do something for your home. A homemade carpentry workbench will allow you to complete any product at a high technical level and save you a lot of time.

IMPORTANT! By discussing this issue, it is assumed that you have free space for works. Ideally, a separate room in the form of a workshop. As a last resort - a high-quality canopy in the yard.

If you are going to do carpentry in an apartment, or on a spacious loggia, the only option is to purchase a folding metal workbench. Of course, it won’t be possible to process large wooden workpieces on it, but the quality of work and convenience will increase by an order of magnitude.

the main task Such a device can securely fix a workpiece of any shape on a flat tabletop. Instead of a carpenter's vice, a system of sliding halves of the working plane is used.

The product is fixed using adjustable stops. There are holes in the table for their installation. The thoughtful design allows you to secure even round workpieces.

The presence of a longitudinal groove in the tabletop (also with an adjustable width) allows you to saw flat products without leaning on the edge, which requires the presence of an assistant holding the free side. The cut can be made in the middle using an electric jigsaw, controlling both halves of the workpiece.

Such tables can be supplemented with an electric plane, circular saw or milling machine, which expands the possibilities.

A similar folding workbench can be made from wood. True, the stability will not be the same as that of a stationary product.

And yet, full-fledged carpentry work cannot be performed on such devices. Firstly, the apartment is not very suitable for this. Secondly, the dimensions of folding workbenches limit the dimensions of the processed products.

Therefore, most craftsmen who take a responsible approach to their work will prefer a full-sized homemade carpentry workbench to a store-bought universal table.

In addition, the finished machine does not provide individual characteristics masters:

• Height, arm length;
• Whether the master is left-handed or right-handed;
• Preferences in processed products - the tabletop can be square or rectangular;
• Features of the room or area where the workbench is used.

How to make a universal carpentry workbench with your own hands

Before you look for a project or develop a drawing of a workbench of your own design, you need to understand how the system works. I would like to immediately have a platform for cutting large workpieces, a milling cutter, and drilling machine.

IMPORTANT! Any versatility impairs the specialized capabilities of the product. Some devices are still better used as separate devices.

Construction of a carpentry workbench

There are a great many designs, but the main components must be present:

Durable tabletop (working surface) made of hard wood.
Oak, beech or hornbeam are suitable. The density of the top plane should be higher than that of the wood of potential blanks.

Options like a lattice made of timber covered with 12-20 mm plywood are not suitable. The flat surface will wear out quickly, and during work the workpiece will constantly catch on uneven surfaces. In addition, an ideally flat workbench in itself is a standard for aligning product components, or a coordinate system for marking.

Reading time ≈ 3 minutes

In any private home, workshop or garage, a carpentry workbench is very the right item. With its help it is convenient to make or repair any things, and it also combines the functions of a table and a shelf for tools at the same time. It can be equipped with a bench vice, and a sharpening machine can be installed on it various instruments. If you buy a metal workbench in a store, it will cost a considerable amount of money, but it is quite possible to make a workbench from wood with your own hands.

Required tools and materials

So for self-made For a workbench in the garage you will need the following tools:

• Hacksaw or electric jigsaw;
• Roulette;
• Square;
• Building level;
• Spanners;
• Drill;
• Screwdriver.

Materials:

• bars for supports;
• 2 sheets of plywood or OSB (one of the sheets is cut to fit the shelf required size);
• boards for the frame;
• self-tapping screws;
• bolts;
• washers;
• nuts

Before work, you need to make a drawing of the workbench with dimensions for ease of assembly.

Step-by-step instructions for making a workbench

For the manufacture of upper frame it is necessary to saw off the boards based on the required size of the workbench (see photo).

Using self-tapping screws, secure 2 long and 2 short boards to form a rectangular frame. Using a tape measure, mark the distance to the middle of the frame, and perpendicularly, between two long boards secure the remaining short board by attaching it with self-tapping screws at both ends.

To make the legs of the workbench, you will need to saw off 6 equal bars. WITH inside of the resulting base, secure one leg to each corner of the frame using bolts, washers and nuts (see diagram of the workbench).

To make the structure rigid, it is necessary to install additional boards, which will also serve as the basis for the lower shelf. To do this you need to saw off 4 boards.

Using a tape measure, you need to measure an equal distance from each leg of 30 cm, at the resulting level, fasten the board to the back of the structure to 3 legs, and from the front, fasten the board between the outer and middle legs, in the place where the future shelf is planned.

The remaining two boards must be secured to the legs, at the same level as the boards for the shelves.

We cut out the necessary sections from one or several sheets of plywood or OSB using a hacksaw or electric jigsaw. We fix them flush to the top of the workbench using self-tapping screws. Additionally, you can fasten a sheet of hardboard on top, because it can be easily replaced with a new one if the old one is very worn out. The bottom shelf is made using the same scheme. Using a tape measure, measure the distance between the outer and middle legs of the workbench; a sheet of material is cut to this size and installed on the resulting base.

When attaching legs or crossbars, it is necessary to use a square to obtain an equal distance between parts of the structure. Using a level at the installation site, you need to check whether the workbench you made yourself is level. If there is a slope, it must be leveled by placing wooden chips under the legs of the workbench.

It's no secret that a well-equipped workplace is the key to successful plumbing, electromechanical or installation work. The main item in a garage or workshop, around which the entire work area is arranged, is the workbench. This desktop must have the necessary functionality, be durable and reliable. Buying a finished product in a retail chain can cost a pretty penny, so it’s better to make it yourself. This will make it possible not only to save money, but also to get a garage table in exact accordance with the requests for functionality and placement.

DIY workbench. How to do it?

Below we will tell you how to make a wooden or metal workbench with your own hands. The presented designs do not require the use of any scarce parts or the use of expensive equipment, and during the installation process you can get by with minimal carpentry and plumbing skills.

Making a workbench with your own hands (from wood)

Making a carpentry workbench with your own hands has a lot of advantages, which include the fact that you can arrange the locations of vices and other devices in advance, think about the number and location of drawers, etc.

Required tools and materials

To make your own workbench, you need to prepare the following tools:

• electric jigsaw or hacksaw;
• electric drill and set of drills for wood and metal;
• carpenter's square;
• roulette;
• bubble level;
• set of wrenches.
• When stocking up on materials, be sure to ensure that the wooden parts do not have cracks or knots. To get started, you will need:
• bars for support legs 100x100 mm;
• two plywood sheets with a thickness of at least 20 mm (OSB can be used). In this case, one sheet will go on the table top, and the other on the lower shelf.
• boards 50x150 mm, from which the frame will be mounted;
• bolts (it is best to use furniture bolts, with a square part that prevents them from rotating in wooden parts);
• washers and nuts;
• self-tapping screws

To facilitate assembly and avoid errors when cutting material, it is better to make drawings of the workbench and indicate on it the dimensions of each part.

DIY workbench drawings

DIY workbench. Step-by-step instruction

First of all, you need to make top frame underframe. To do this, boards of the required length are sawn off in accordance with the drawing.

Using self-tapping screws, long and short parts are fastened in such a way as to obtain a rectangular frame. After this, measure the distance to its middle along the long side, where a spacer bar is installed. The same 50x150 mm board is used, which is attached to the frame with self-tapping screws at both ends.

DIY wooden workbench. Photo

Support legs The workbench is made of 6 identical bars. To attach them to the upper frame, long bolts with nuts and washers are used. To install the support, a block is placed in the corner of the frame and two through holes are drilled through the leg and the side board. Then the connections are tightened using bolts and nuts.

To achieve the required structural rigidity, lower boards are installed. By the way, these same details will also serve as the basis bottom shelf. To do this, in full accordance with the workbench drawings, 4 wooden parts with a cross-section of 50x150 mm are sawn off.

To secure the bottom boards, measure 30 cm from the edge of each support. At this height, one part is attached to the three rear legs of the structure, and from the front, the board is attached between the middle and side supports on the side where it will be installed additional shelf.

Two short boards are mounted at the same height on the sides of the workbench.

Using an electric jigsaw or hacksaw, parts are cut from sheets of OSB or plywood for table tops. It is attached flush to the top of the desktop using self-tapping screws. To protect the surface of the workbench from damage, a layer of hardboard is laid on top of the plywood, which can be easily replaced with new material as it wears out. To install the bottom shelf, measure the distance from the middle to the outer legs. The material is cut to this size and with a jigsaw or hacksaw, cutouts are made in its corners for the support legs. Attaching the shield to the lower base is carried out in the same way as installing a tabletop.

To obtain stability of the frame structure, when attaching supports and assembling the frame mechanic's workbench must be used carpenter's square. After installing the workbench, use a bubble level to check its horizontal position. If necessary, the level can be changed by placing small pieces of thin plywood under the legs.

DIY workbench. Step-by-step instruction

After assembly is completed, the workbench is impregnated with a special protective composition, varnished or painted.

A small workbench for the home with your own hands

The design of the mechanic's workbench proposed below will greatly facilitate metalworking and installation work not only in a small garage, but also on the balcony, in the corner utility room etc. With all the functionality and convenience of a full-size workbench, it won't take up much space and can hold a variety of tools and gadgets in its drawers.

Tabletop small workbench It is made from two sheets of plywood glued together with a thickness of at least 18 mm and has dimensions of 1500x600 mm. To strengthen the table cover, it is additionally thickened at the edges with two layers of plywood sheet, giving a thickness of 72 mm.

Considering that plywood with a thickness of 18 mm is not the cheapest material (the cost of one sheet is about 1000 rubles), you can save a little if you buy a full-size sheet with dimensions of 2440x1220 mm. Unfortunately, this material is not enough to make the reinforcing strip that is located around the perimeter of the lid, so you will have to additionally look for a small piece of plywood sheet. Otherwise, the design of the tabletop will have to be changed.

When starting to build a small carpentry workbench with your own hands, prepare the following tools and materials:

• rule at least 2 m long;
• Circular Saw;
• carpenter's square;
• notched spatula with tooth size 2x2 or 3x3 mm. You can buy a ready-made tool or make it yourself using a grinder;
• screwdriver or set of screwdrivers;
• spanners;
• good wood glue, for example, “Moment Joiner”
• plywood 18mm thick;
• wooden beam 40x60 mm;
• self-tapping screws;
• bolts, nuts, washers.

In addition, to make a workbench yourself, you need to acquire good carpentry clamps, without which gluing plywood sheets will be problematic. If quality tool It is not possible to purchase; you can use inexpensive Chinese clamps, of which you will need double the amount.

The process of making a workbench with your own hands begins with covers, onto which a strip 1520 mm long is cut from a sheet of plywood 2440 mm long. By sawing this part, we obtain elements measuring 1520x610 mm to strengthen the sides of the lid. Then the plane is checked using the rule plywood sheets, in order to orient them with their convex surface inward when gluing.

The next stage will require maximum concentration and accuracy - within a couple of minutes you need to evenly distribute wood glue on the surface of one sheet of plywood. If you feel that lack of experience will not give you the opportunity to cope with this work in such a short time, then use PVA furniture glue to join wooden parts. It has no time restrictions and can be applied with a simple paint brush. Having prepared clamps and boards in advance to distribute the load over the entire plane, lay the bottom sheet on three boards, and after applying the adhesive, cover it with the top plywood board.

Having installed pressure boards on top, tighten the structure with clamps, constantly monitoring the flatness using the rule. It will not be possible to press the place in the center of the tabletop with a clamp, so it is left without load.

When gluing a board from several sheets of plywood, you can do without clamps if you place the structure on flat surface and press evenly over the entire plane with some kind of weight. After the glue has dried, remove the clamps or weights and begin next stage making a workbench with your own hands.

So that the tabletop has a strict geometric shape, when she is circumcised parquet flooring you have to be very careful. The rule can be applied as a guide bar for guiding a saw. When cutting the tabletop to dimensions of 1500x600 mm, maintain 90° angles using a carpenter's square or using the factory angles left over from cutting plywood as a template. Distribute the remaining scraps of plywood board into strips 150 mm wide. They will be needed to reinforce the perimeter of the tabletop, so glue them along the entire edge of the tabletop in two layers. Wherein top stripes should cover the joints of the lower sections of plywood.

For the manufacture of underframes timber with a cross section of 40x60 mm is used. In this case, the drawers and legs are made from solid lumber, and the supports are glued together from two pieces and one whole beam. The height of the workbench is chosen taking into account your height, since there should be no inconvenience or discomfort when using it. In our case, the height of the workbench from the floor to the top surface of the tabletop is 900 mm.

Next, glue the legs and assemble two frames. In this case, it is important to maintain the perpendicularity of the connections, since if they deviate from right angle the geometry of the structure will be disrupted. It will be easier to achieve this condition if, even at the trimming stage, the angles of all parts are strictly 90°. In our workbench, the frame width is 900 mm, and the height of the support legs is 830 mm. The gap from the floor to the bottom rung should be 150 mm.

After the glue has dried, the frames are mounted on the tabletop and secured with clamps. Then the legs are set strictly at an angle of 90 degrees to the bottom surface of the plywood panel and another set of legs and drawers are cut out. To fasten the structure to the tabletop, use 8x120 mm self-tapping screws.

The stability of the workbench can be increased if the legs and drawers are additionally fastened with the same screws. By choosing a recess for the head of the hardware with a feather drill, the joints are ensured to be aesthetically pleasing.

The workbench is almost ready. If desired, you can make a box for storing tools in its underframe.

DIY metal workbench for the garage

A workbench made of steel has the necessary strength and reliability required when working with metal products. This desktop can add functionality to any garage or workshop.

Materials and tools

To start making a workbench for your garage with your own hands, you should acquire the following plumbing tools:

• angle grinder with cutting and grinding discs;
• welding machine;
• building level;
• electric jigsaw;
• drill with a set of drills;
• screwdriver;
• measuring tool.

DIY metal workbench drawings

Some materials needed for the workbench can be found in the garage, and the missing parts can be purchased at construction market. You will need:

• steel corners 50x50x4 and 40x40x2;
• profile pipe 60x40x2;
• steel strip 40x4 mm;
• steel sheets 2200x750x2 mm;
• boards 50 mm thick;
• 15mm plywood and drawer guides;
• metal screws and bolts.

In addition, prepare paint and rust converter to make the product look aesthetically pleasing and protect the metal from moisture.

Step-by-step instructions for making a metal workbench

Cutting the material. Cut into frame profile pipe. Steel angle is used to strengthen the structure and edging the tabletop. The metal strip is needed as guide elements for the side panels and for making table drawer brackets.

Frame welding. A rectangular tabletop frame is mounted from pipes 2200 and 750 mm long, connected in pairs. At the same time, it is taken into account that on top of the frame it will be necessary to weld the corners into which the boards of the working surface are laid. To strengthen the frame, sections are welded every 400 mm steel pipes as stiffeners.

How to make a workbench with your own hands from metal. Photo

At the edges of the table, support legs 900 mm long are mounted by welding, which are reinforced at the bottom with jumpers from a corner or profile pipe.

The frames of the workbench drawers are welded to the legs on both sides.

Corners for edging are installed on the tabletop frame, and then secured with a welding joint.

From a corner 2200 mm long and 4 corners 950 m long, a sheathing of a power vertical panel for tools is arranged.

The finished frame is strengthened brackets made of steel bars, which are welded to its sides. To strengthen you will need 24 elements. Additionally, it is necessary to drill holes in each strip for mounting the side and rear plywood walls.

Plywood is cut into parts to make boxes, after which they are assembled using self-tapping screws. The number of drawers and their location depends on the specific need and personal preferences of the owner.

After assembling the drawers, metal strips with holes for attaching the slides are welded to the sides of the frame.

All welding seams and sharp corners are passed with a grinder with a grinding wheel installed, and rusty areas of rolled metal are cleaned with a metal brush attachment.

The metal frame is treated with an anti-corrosion compound and painted with weather-resistant paint.

The boards are cut to the length of the tabletop and placed in a frame made from a corner. To prevent rotting and damage to wood by insects, the boards are treated antiseptic composition.

The lumber is laid in the prepared bed, leaving 2-3 mm gaps between the wood and the metal to allow the wood to expand when swelling. After this, the boards are screwed with self-tapping screws.

Upper steel sheet treated on both sides with a rust converter, and after drying, attached to wooden tabletop self-tapping screws.

The table drawers are painted and installed on the guides, and the side and back plywood trim is attached.

After the workbench is made, a vice and other things are installed necessary equipment, attach hooks to place the tool.

What is a workbench

A workbench is a table designed for work related to the manufacture and installation of products made of wood, metal and other materials. Workbenches are often additionally equipped with equipment for fastening workpieces, drawers and shelves for storing tools and accessories. Depending on the intended purpose, there are carpentry and metalworking workbenches for working with wood and metal, respectively. Work tables for workshops and garages can be single or multi-seat. Workbenches designed for one workplace have a width of up to 0.8 m and a length of up to 1.5 m. The dimensions of multi-person benches increase according to the number of people working at them. The distance of the working surface from the floor is usually 0.8 - 0.9 m, however, there are also designs with adjustable height. Workbenches are most often made of metal or wood, and their tabletops are covered with sheets of plywood, hardboard, galvanized sheet, boards and other materials.