If you are the owner of an old and unnecessary bathroom, do not rush to throw it away. We will tell you how to make soft and comfortable sofa from your cast iron bathtub.
Marking and trimming
1. Measure and mark where you would like to cut out the sofa tub section. We advise you to make the lines straight, this will make it easier to cut.
2. Cut along the lines with a grinder. Don't forget to wear safety glasses. Be careful, because the fragments are very sharp. When trimming is complete, hold the cut sheet to prevent it from falling and damaging the enamel inside the tub.
3. Sand the edges using a sander. They must be level and smooth for safe use.
Grinding
1. It is necessary to clean the bottom of the bathtub from old paint. Use sandpaper, a hand scraper, or any other tool of your choice.
2. Use solvent to remove paint residue. Obviously all the paint won't come off, but that's ok. A little Provence wouldn't hurt.
3. You can cover the edges of the bathtub with masking tape or film. 4. You can remove or leave the drain hole. At your discretion.
Grinding is a responsible and long process
Painting
1. Prime. A couple of coats of primer won't hurt.
2. Unscrew the legs of the bathtub and prime it. Paint them a couple of times.
3. Paint the bathtub. Paint and color of your choice. You can use any façade paint.
Sofa decoration
1. Take foam rubber - this will be the bottom of the sofa. Measure the inside width and length of the bathtub and cut required size for the bottom.
2. Take your pillows and wrap them in a batting blanket. Cover with a cloth. Fold the edges under and tuck them around the edges of the foam.
3. You can sew a cover.
DIY sofa from old bath ready. Now you can sit down and relax.
When a long-awaited major renovation takes place in an apartment, many are driven by a single desire - to quickly get rid of old things in the house, as a result of which most of them begin to safely move to the balcony, to the garage or to the country house. When it comes time to renovate a bathroom, a pressing question arises - what to do with an old cast-iron bathtub? It served well for so many years that it would be a pity to throw it away and there is no place and no need to store such a heavy, large-sized plumbing attribute. The ideas from this article will help solve this problem, showing how you can make a so-called upgrade and give new life old bath.
Small reservoirs and ponds always harmonize perfectly with landscape design dacha area. Build it yourself small pond will not be difficult if you have an old bathtub. Such a pond will look most natural if the bathtub is buried almost to the very edges in the ground. In the place where it is planned to organize a pond, it is necessary to make markings based on the size of the bathtub and dig a hole corresponding to its parameters. Next, plug the side and bottom drain holes with a wooden plug wrapped in cloth. It is better to paint the inside of the bath black so that the bottom of the bath does not shine with an unnatural whiteness. However, if you do not plan to periodically drain the water from the pond and clean the surface of the bathtub, then after a certain amount of time the bathtub itself will take on a natural appearance due to adhering dirt, plant debris and insect waste products. Here are other ways to make a pond in your dacha with your own hands.
You can lay stones around the pond and plant plants such as loosestrife, bells, iris, ferns, and bergenia. You can also decorate the pond with lanterns and various figures of animals and birds.
Cozy sofa for the cottage from an old bathtub
With some effort and creativity, Can old bath turn into a stylish and original sofa. It can be placed as it is summer cottage, and in the house. To implement this idea, you need to mark a cut line on one of the sides of the bathtub and remove the excess part with a grinder. The edges should be smoothed and then the bathtub should be painted inside and out in any colors you like that match the interior of the room. After painting, secure the edging to the cut edges. It should be glued to the legs with liquid nails. decorative overlays. A mattress and pillows are placed at the bottom of the bathroom. The sofa is ready.
Beautiful flower bed from an old bathtub
Making an excellent flower bed out of an old bathtub is easy. Besides, it's almost ready. You can bury the bathtub completely in the ground, as in the case of a pond, then fill it with soil and plant plants. You can leave the bathtub standing on legs or dig only the legs into the ground. At the same time, the outside of the bathtub should be painted and you can even use your imagination and paint the bathtub with beautiful patterns. Also, for decoration purposes, you can lay out a mosaic on outside crushed baths tiles. And a few more ideas for a homemade flowerbed from old things for your dacha.
An old bathtub as a water storage for irrigation
Many summer residents use an old bathtub as a container for storing water in the country. But so that the old bath does not spoil appearance summer cottage, you can easily build a funny cow out of it, like in the photo, which will give a smile and good mood to all family members and neighbors. This excellent cow can also be used as a mini swimming pool for children.
Interesting idea arrangement of water storage
In general, any old thing you can breathe new life, embody it in a different form, use it for a different purpose. Old bath - excellent material for creating truly amazing and most importantly functional decorative elements for a summer cottage, be it a picturesque flower bed, a quiet pond in the thickets of plants, a stylish sofa, an original water storage tank or even a mini pool.
Elvira Goleva for Decorwind.ru
When a long-awaited major renovation takes place in an apartment, many are driven by a single desire - to quickly get rid of old things in the house, as a result of which most of them begin to safely move to the balcony, to the garage or to the country house. When it comes time to renovate a bathroom, a pressing question arises - what to do with an old cast-iron bathtub? It served well for so many years that it would be a pity to throw it away and there is no place and no need to store such a heavy, large-sized plumbing attribute. The ideas from this article will help solve this problem, showing how you can make a so-called upgrade and give new life to an old bathtub.
Small reservoirs and ponds always harmonize perfectly with the landscape design of a dacha area. Building a small pond yourself is not difficult if you have an old bathtub. Such a pond will look most natural if the bathtub is buried almost to the very edges in the ground. In the place where it is planned to organize a pond, it is necessary to make markings based on the size of the bathtub and dig a hole corresponding to its parameters. Next, plug the side and bottom drain holes with a wooden plug wrapped in cloth. It is better to paint the inside of the bath black so that the bottom of the bath does not shine with an unnatural whiteness. However, if you do not plan to periodically drain the water from the pond and clean the surface of the bathtub, then after a certain amount of time the bathtub itself will take on a natural appearance due to adhering dirt, plant debris and insect waste products. Here are some other ways.
You can lay stones around the pond and plant plants such as loosestrife, bells, iris, ferns, and bergenia. You can also decorate the pond with lanterns and various figures of animals and birds.
Cozy sofa for the cottage from an old bathtub
With some effort and creativity, you can turn an old bathtub into a stylish and original sofa. It can be placed both on the summer cottage itself and in the house. To implement this idea, you need to mark a cut line on one of the sides of the bathtub and remove the excess part with a grinder. The edges should be smoothed and then the bathtub should be painted inside and out in any colors you like that match the interior of the room. After painting, secure the edging to the cut edges. Decorative overlays should be glued to the legs with liquid nails. A mattress and pillows are placed at the bottom of the bathroom. The sofa is ready.
Beautiful flower bed from an old bathtub
Making an excellent flower bed out of an old bathtub is easy. Besides, it's almost ready. You can bury the bathtub completely in the ground, as in the case of a pond, then fill it with soil and plant plants. You can leave the bathtub standing on legs or dig only the legs into the ground. At the same time, the outside of the bathtub should be painted and you can even use your imagination and paint the bathtub with beautiful patterns. Also, for decoration purposes, you can lay out a mosaic on the outside of the bathtub using crushed tiles. And a few more ideas for your dacha.
An old bathtub as a water storage for irrigation
Many summer residents use an old bathtub as a container for storing water in the country. But in order for the old bathtub not to spoil the appearance of the summer cottage, you can easily build a funny cow out of it, like in the photo, which will give a smile and a good mood to all family members and neighbors. This excellent cow can also be used as a mini swimming pool for children.
In general, you can breathe new life into any old thing, embody it in a different form, and use it for a different purpose. An old bathtub is an excellent material for creating truly amazing and, most importantly, functional decorative elements for a summer cottage, be it a picturesque flower bed, a quiet pond in the thickets of plants, a stylish sofa, an original water storage tank or even a mini pool.
Elvira Goleva for website
If the old bathroom has served its purpose, do not rush to throw it in a landfill or sell it for scrap; you can use it to make a rather original and creative sofa with your own hands. Such a sofa can become a decoration for any home, from an apartment to country house, it will also fit well into the interior of various salons and offices providing services.
To make such a sofa, an old cast iron or metal bath, although it is better to give preference to cast iron, it has good stability and an original shape, especially if it is an old model. Making a sofa from a bathtub is quite simple, all you need is an old bathtub, a corner one Grinder(grinder) with cutting wheels for metal and grinding attachments, enamel paints for painting bathtubs and foam rubber with fabric for seats and pillows.
After removing the legs, we clean off the damaged and peeling areas of paint and enamel.
Having laid the bathtub on its side, we draw the expected shape of the sofa frame; here everything depends on the wishes and your own fantasies. Cut lines can be straight, oblique, patterned, semicircular, etc.
We carry out cutting with a grinder and do not forget about personal protective equipment.
Having cut out the excess part of the bathtub, we sand the cut line to remove burrs and make it more rounded. You can paint with any paints intended for metal base, these are all kinds of enamels, nitro paints, aerosols and the like.
The legs in such bathrooms are overhead and self-tightening under the weight; they need to be cleaned, painted and put into groove inserts. In case of their absence, you can cook required frame from pipes or angles and install it in it, you can also make stands from stone or wooden beams.
Making a seat is enough simple work, take foam rubber of suitable thickness and cut out the required shape from it.
We wrap the cut-out foam rubber blank with padding polyester or spandbond.
Then we cover it with a cloth; if possible and desired, you can sew a cover and insert foam rubber into it.
You can sew the pillows for the back and side armrests yourself or purchase ready-made ones in the store that are suitable in color and size.
Here you can see that the seat base is made from wooden planks, which in turn can be covered with a blanket, blanket or soft blanket.
In this option, the entire interior is covered with foam rubber and a one-piece cover is sewn.
A padded backrest and headrests will give this sofa a businesslike look.
The right combination of colors and colors will give the sofas a unique glamor.
By cutting the bathtub in half, we get two original and quite comfortable chairs, which will become a spectacular addition to your sofa, made from an old bathtub with your own hands. Requirements for the top rating of casinos in 2019 are here http://www.wowmagic.ru/kazino-zerkalo/top-rejting-onlajn-kazino/ How to choose the top casino?
Do it yourself
Do-it-yourself door upholstery
After overhaul there is a lot of old stuff left in the house building material, including wooden doors. We offer one of the options for how to frame a door with your own hands....
How to make a sofa
Every person can make a sofa on their own, even with minimal carpentry skills, just a little skill in using construction tool And...
The dacha is a great place for relaxation, active pastime and realization creative imagination. Here you can bring a lot of things you don’t need in your apartment and give them a new, unique “look.”
You can make a huge amount out of an old bathtub original designs, which will be useful not only on the farm, but also on personal plot. So you can build a pond out of it, alpine slide, an unusual sofa, a flower bed, etc. The main thing is to be patient and use as much imagination as possible.
Pond at the dacha from the bathtub
An artificial pond from an old cast-iron bathtub is a wonderful way to decorate a summer cottage. It brings special harmony to the general atmosphere, allows you to use the most unusual elements for decoration.
Peculiarities:
- a pond created from an old bathtub is quickly and easily installed;
- when constructing it, you do not need to use expensive building materials;
- used for decoration aquatic plants, stones, fish, etc.;
- the water in the container does not change, but is simply added as needed;
- In winter, the pond is left as is, without covering it with film.
Where to place:
- choose a dry area with solid soil;
- give preference to a place where there is shade and sunlight;
- The best area for a pond is near trees.
Installation of a bathtub in a summer cottage as a reservoir
1. The first thing to do is dig a pit. The depth of the hole should be slightly more sizes containers (about 30-40 cm).
2. Then we remove the turf around the pit (the same 30-40 cm). The width of soil removal is 0.5 m.
5. We dilute tile adhesive and treat it inner surface baths. The solution does not need to be leveled - this will make the bottom of the pond look more natural.
6. Leave the container to dry thoroughly for about a day.
7. Take the chain-link mesh and cut it into pieces. We close the upper perimeter of the bathtub, the walls (by 1/3).
8. We fix wire rings at the corners of the mesh. They should protrude perpendicular to the walls of the bath.
9. Divorce cement mortar, we process the mesh with it. We place crushed stone or small stones on top.
10. Place dry clay on the bottom of the bath in a 5 cm layer. Pour in water. The solution should transform into a semi-liquid (creamy) mass. We coat the walls of the bathtub with this composition.
11. Dry the clay for several hours. Then we start pouring water (the stream should run in a small trickle).
12. Take a couple of buckets of water with silt from a natural reservoir and pour it into the bathroom.
13. Plant plants around the perimeter of the pond and place large stones.
Notes:
- the water in the pond does not change, but is only added as needed;
- before frost, place a couple in the pond plastic bottles half filled with water - they will prevent the pond from freezing and damaging the walls of the bathtub;
- If you don't want to bother, leave the bathtub in the garden or next to the patio. Decorate it with bright paint, fill it with water, and plant pond plants on the bottom (they can be placed in containers).
Bath in the garden as an alpine slide
Progress:
1. Take an old bathtub and beat it to a smooth surface. This can be done using electric drill with a disc-shaped attachment.
2. Coat the container with paint or glue, and apply a mixture of sand, cement and peat (1 cm thick) on top.
3. Let the product dry thoroughly.
4. After all the activities, start planting the plants.
Notes:
To give it a "slide" natural look, coat the walls of the bath with rice water or kefir - this will speed up the development of moss and algae.
Flowerbed from the bath
Basic principles:
- It is recommended to prepare the soil for the flowerbed in advance;
- always monitor drainage, fertilize plants with humus;
- the flowerbed must be planted with plants with different flowering periods - this way it will please the eye throughout the whole season;
- Place tall plants closer to the center, and shorter ones at the edges;
- Flowers should be selected based on the color of the buds and foliage.
How to make a flowerbed out of a bathtub?
1. Paint the bathtub green, gray, black or any other bright color.
2. Fill it with fertile soil.
3. Plant plants (medium or tall in the middle, climbing at the edges).
Notes:
- if you bury the bathtub halfway, you will get an original low flowerbed;
- if it stands on legs, decorate the facade with stones, pieces of tiles, and apply a bright image.
Cottage sofa from an old bathtub
Progress:
1. Mark a cutting line on one of the sides of the bathtub.
2. Use a grinder to remove the unnecessary part.
3. Treat the edges of the bathtub with a special tool that will smooth out irregularities and sharp corners.
4. Cover the product with paint (outside).
5. Using liquid nails Install decorative overlays on the legs and secure the edging to the cut edges.
6. Place a mattress and bright pillows at the bottom of the bath.
Old bathtub in the country: photo
