The fence performs not only the function of protecting property from the entry of strangers, but also an aesthetic, decorative function, being a decoration land plot. While previously stones, bricks, and wood were used for fencing, modern welded metal mesh allows you to quickly recreate a fence of the required height, strength, and individual design.

The advantage of welded mesh fences

Sectional metal fences from welded mesh They are light in weight, they are durable and resistant to aggressive external influences, the installation of such fences is not labor-intensive, can be done with your own hands in a short time, and the mesh does not create a shadow and is optimal in terms of pricing. If defects appear, it is easy to replace damaged areas.

Welded mesh for fence - photo

Types of metal welded mesh for fences

Metal mesh is made by welding wire of various thicknesses at the points of contact ( spot welding). Moreover, the cells can be of very different sizes and shapes - from standard square and rectangular, to unusual polygonal (rhombus, trapezoid and others). A layer of polymer or other coating is applied to the surface of the mesh to protect it from corrosion. The result is a canvas that is used for fences.
Types of metal mesh for fences depending on the type of coating:
Welded mesh with a polymer (polyvinyl chloride) coating, usually this mesh is green or another color. The polymer is applied to the surface of the wire by immersing it in a solution or powder dyes are applied in special cabinets.
Welded mesh, galvanized and non-galvanized. The manufacturing process may differ in the order of steps. Either they weld already galvanized wire, or, on the contrary, produce a mesh, which is then galvanized or sent for sale without coating.
Welded mesh with galvanization and polymer coating. This mesh is the most durable, but at the same time very expensive. For a regular fence, the use of such a mesh is impractical.

The mesh is produced and supplied to consumers in the form of panels and rolls. Rolls are produced weighing from 50 to 500 kilograms, up to two meters high. The length of the mesh in a roll ranges from 15 to 33 meters.

Installation of a sectional metal fence

The first stage is to study the territory, as well as measure the required length of the future fence.
In places where the fence will be located, the soil should be leveled, bushes and trees should be removed, and large stones and foreign objects should be removed.

Installation of support pillars without using concrete.

Before installing them in the ground (concrete), the racks must be protected from corrosion. To do this, we apply a layer of paint, bitumen, or wrap them with a piece of roofing material on the lower part of the posts.

The convenience of installing support posts without using concrete is that without using concrete you can install a fence at any time of the year, even in winter. Besides, installed fence easy to dismantle if necessary. The method is optimal for installing a fence on heaving soil.

We will literally drive the fence into the ground. Therefore, you will need to prepare small-diameter depressions in the soil for the support pillars. All wells must be the same depth and located on the same line so that the fence ends up perfectly smooth. The distance between the wells ranges from 250 to 300 cm.
We insert metal posts into the prepared recesses and drive them into the ground. The depth of the wells is taken equal to 1/4 of the length of the support column. However, if the depth of soil freezing is too high, then the depth of the pit should be increased.

Pay attention to the verticality of the installed posts and their height, which should be equal along the entire perimeter of the fence. Use a tape measure building level and threads stretched onto pegs for easy alignment of supports.

We fill the space between the soil and the walls of the pillars with fine rubble (a mixture of crushed stone or gravel with sand) and compact it thoroughly.

Careful tamping ensures the immobility of the posts and the strength of the fence installation.

Installation of support pillars with concreting

Similar to the first method, it is necessary to mark a place for wells on the site, dig them, checking the distance between them and the depth.
We insert racks into the dug wells and fill them with concrete mortar.
To prevent the pillar from deviating, during the hardening period concrete mortar(two days) it should be strengthened with spacers.

Particular attention should be paid to the pillars located in the corners of the site and to those on which the wicket (gate) will be attached. Such racks require particularly strong fastening, as they carry additional loads.

Monolithic strip foundation for the fence

Such a foundation is capable of withstanding significant loads and will provide adequate reliability and stability to the future fence.
Before starting work, you should mark and dig a trench. In this trench we additionally dig holes for the pillars. Install wooden formwork into the trench. We lay reinforcement for strength. We install the racks and fill the entire trench concrete mixture. We strengthen the pillars with spacers while the solution hardens.

Attaching metal mesh to support posts
In order to fasten a sectional metal fence to support posts, you will need: brackets with bolts and nuts that ensure the mesh is pressed to the post (or clamps instead of brackets); connecting clips for joining sheets, screwdriver, angles, welding machine.

We prepare fence sections for installation. We lay them out next to the racks.

We weld metal corners onto the racks. They will serve as fastenings for the fence sections.
In the corners of each section we drill holes through which we fasten the sections with screws.

Another method allows you to do without connecting brackets, but dismantling the fence if necessary will be difficult. To do this, we connect the fence sections with metal corners on the racks and weld them.

Welded mesh fence - photo

If, instead of sections, canvas is used, the edges of the two rolls should be applied to each other, remove one outer wire and use it to connect the edges of the canvases, forming a single monolithic one. Then we unfold the mesh and secure it to the racks with staples or clamps.

Video - metal fence made of welded mesh

Some dacha cooperatives do not provide for the installation of between plots or any other similar material, since such structures shade small plots. In this case, a fence made of welded galvanized mesh becomes an excellent solution. It will not prevent ultraviolet radiation from entering the site, will not impede natural air circulation and can be erected by any summer resident.

Preparation

The chain-link represents inexpensive material, which is ready to last quite a long time. An additional advantage is the ability to use it as a support for climbing plants. This mesh was invented at the end of the 19th century, but is still widely used today. Every consumer can purchase it.

To create a fence, in addition to the mesh, you should prepare reinforcing bars, thick wire, and cable. When choosing a grid, you should pay attention to the size of the cells. The smaller it is, the more expensive the mesh will be, but also stronger. If the mentioned parameter is equal to the limit from 40 to 50 mm, and the roll width is 1.5 m, then this material will become great solution to create a fence for a summer cottage.

Tension fence

A fence made of welded galvanized mesh can be tensioned. This method of making it is the simplest. After all, the material will have to be stretched between the pillars, which can be made of the following materials:

• concrete;
• wood;
• metal.

The number of supports will depend on the pitch between them and the length of the fence itself. The best distance is 2.5 m. Pipes can be used as pillars, but they must not be damaged by corrosion. On sale today you can also find ready-made poles that have hooks and a painted surface. Before installation, it must be treated with a protective compound.

As alternative solution The mesh protrudes towards them and is fixed with a clamp or wire. The height of the pillars must be calculated. If the clearance between the ground and the fence is 5 to 10 cm, then the underground part of the support and the width of the mesh should be added to this parameter. The load on the corner pillars will be greater, so they need to be placed deeper than the others. Therefore, their length should be 20 cm greater than the length of ordinary pillars.

When making a fence from welded galvanized mesh, you must concrete the bases of the supports to increase strength. The pillars will form the frame of the structure. After installing them, you can begin fixing the mesh. As soon as the concrete hardens, hooks are fixed to the posts or welded if the post is metal. The material for fastenings should be:

• wire;
• nails;
• rod;
• screws.

You can use any other material that bends into hooks. At the same time, the roll is straightened and installed at the corner support, the mesh must be hung on the hooks.

The roll needs to be unwinded one span to reach the next post. The rod is threaded a little further than the place where the mesh will connect to the post. The master should hold the rod and tighten the mesh. If a rod is not used, the mesh may not be tensioned evenly.

It is better to carry out this work with the help of another person. He will hold the grid at the bottom edge, while the other master will hold the grid at the top. On next stage The reinforcement is threaded into the mesh; a 5 cm margin must be left along the edges. When installing a fence made of welded galvanized mesh, it is necessary to weld the horizontal rods or attach them to the posts.

Without using rods, over time you will encounter the fact that the mesh will sag. When the technology is followed, rods are used to maintain tension. The mesh should be pulled further according to the principle described above, fixing and pulling the rod or wire. At this point we can assume that the fence is almost ready. The hooks are bent on the posts, the last of which are painted. It is recommended to fold the wire antennae downwards to reduce the risk of injury. The wire is usually threaded through the top edge of a row of cells, and the protruding edges should be wrapped around it.

Sectional fence

To build a sectional fence, you will need sections where the mesh will be installed. At the first stage, you should use a technology that is similar to that described above. To do this, the area is marked out, and then poles are installed.

Installation of a mesh fence will involve the use of a corner whose dimensions are 40 x 5 mm. These elements will be needed to make the frame. Its length is determined taking into account the distance between the pillars; 15 cm must be subtracted from this value. The same amount should be subtracted from the height of the pillar above the soil level. This will give you the width of the frame.

The corners need to be welded into rectangular structures. The size of the sections is made taking into account the size of the mesh, which varies from 1.5 to 2 m. Galvanized welded mesh in rolls, if necessary, can be cut with an angle grinder.

Work methodology

At the next stage, metal strips are welded to the pillars. They should be placed horizontally. Their length can be from 15 to 25 cm. As for the width and cross-section, they are 5 cm and 5 mm, respectively. With a deviation of 20 cm from the edge of the post, it is necessary to install a section between the two supports. Welding is used for this. At the next stage, you can start painting the fence.

Fence cost

Quite often, summer residents and owners of territories within the city ask themselves the question of how much a galvanized mesh fence costs. If the width of the material is 1.5 m, then you will have to pay 310 rubles for such a fence. per linear meter. Using a mesh whose width is 1.8 m, specialists charge 390 rubles for their services. per linear meter.

Pulling reinforcement will cost the consumer 40 rubles. per linear meter. You may also be interested in the question of how much a fence costs. If its length is 50 m or more, then you will have to pay 355 rubles per linear meter. This price is correct for structures in which the reinforcement is installed in one row. The mesh width is 1.5 m. This parameter will be equivalent to the height of the fence. If it increases to 1.8 m, then the cost will rise to 415 rubles. The price includes metal supports, pulling reinforcement in one row, galvanized mesh and installation work.

Mesh cost

If you decide to do the work yourself, you can inquire about the cost of the mesh. If the diameter of the wire used is 1.2 mm and the mesh size is 10 x 10 mm, then pay for square meter the material will cost 455 rubles. The price per roll will be 6825 rubles.

Galvanized mesh, the cell size of which is 20 x 20 mm, will cost the consumer 234 rubles. per square meter. In this case, the diameter of the wire used is 1 mm. But the price per roll will be 7020 rubles. With an increase in cell size to 25 x 25 mm, the cost increases to 416 rubles. per square meter. In this case, the wire diameter is 2 mm, and the price per roll will be 12,480 rubles. Galvanized welded mesh 50x50 mm will cost the consumer 312 rubles. per square meter, while the price of the roll will be 7020 rubles, and the wire diameter will be 2.5 mm.

Conclusion

Galvanized welded mesh in rolls will be an excellent material for making a fence. It is easy to cut, it is quite simple to pull it between support pillars In addition, it is durable. And in some cases, a mesh is the only correct solution when it is necessary to fence an area, but it is necessary to provide access to sunlight.

Did you know that not all types of fences are allowed to be installed between neighboring areas? This is due to the fact that high monolithic fences constantly shade the space. Considering the small size modern dachas, almost every plant in the garden will grow sluggish and weak. As a result, you may constantly encounter complaints from neighbors. What to do in such a situation? An excellent solution would be to use a mesh that will not be an obstacle to sunlight and air masses.

A similar mesh fence is used not only for summer cottages, but also for fencing sports facilities, technical areas, reservoirs, and so on.

Principles of fence installation

Modern construction technologies provide two options for how to build a fence from welded mesh with your own hands. The first option involves tensioning it between the pillars. In the second option, it will be necessary to make corners into which the mesh fragments will be fixed. The first option is much easier to implement, but it is less durable and aesthetically attractive.

To produce sections you will need additional financial resources. The cost of the corner can significantly exceed the cost of the grate itself.

In any case, installing a mesh fence involves the use of posts.

The pillars can be made of wood or metal. The first option is distinguished by its cheapness and availability, but it cannot boast of great durability. It is necessary to purchase wooden supports when making mesh fences only if their cost will be several times less than their metal counterpart, or if you only want to install a temporary fence. There are also situations when wood remains after building a house, and you don’t want to throw away the material. To avoid unnecessary expenses, you can use existing poles.

The most preferable option for a dacha is to use metal poles for mounting. They are characterized by high reliability and durability. In the majority of cases, pipes with a round or square cross-section are used, the diameter of which ranges from 6 to 12 centimeters. The thickness of the pipe wall should not be less than 2 millimeters. To reduce the cost, it is recommended to purchase pipes directly at a scrap metal point, where you can often find good specimens water pipes. A DIY mesh fence will not be damaged.

Principles of territory marking

First, you need to install temporary pegs in the corners of the site, between which you can stretch the construction thread. The length of the cord will be the length of the required mesh, but it must be purchased with a margin of 1-2 meters. After this, we designate the places where the pillars will be located. The optimal distance between tables is considered to be from 2 to 2.5 meters. A larger distance should not be allowed due to the deflection of the lattice.

It is worth noting that on a site with a sufficient slope it will be impossible to build a fence from a mesh, because it is not possible to secure it properly in an inclined position.

The only way out of this situation is terracing the site, which involves installing poles of greater length and power in places where there is a difference. On one side of the post the grating will be mounted at a higher level, on the other - lower. To do this, the mesh will also have to be cut. You can also mount sectional fence for the dacha.

Pole installation process

In the places designated for the pillars, it is necessary to dig wells using a special drill or shovel. A sectional fence made of welded mesh will otherwise be unstable. The depth of each well should be in the range from 1.2 to 1.5 meters. It is worth paying attention that the depth of the pit should exceed the freezing depth of the soil by 20 centimeters. First of all, it is necessary to install corner pillars, because the greatest and uneven pressure will be exerted on them. Before installation, a drainage layer of crushed stone and sand must be placed in the well.

The installed support must be vertical. This can be checked using a plumb line or level. Only after this can the holes be filled with your own hands using a special solution. The solution should not be very liquid, otherwise the structure will not be strong enough. Further work that a DIY welded mesh fence requires can be carried out only after the concrete has completely dried.

Installing the mesh directly

After the concrete has dried, it is necessary to use welding to weld hooks onto the posts, to which our mesh will ultimately be attached. To organize with a hook, you can use nails, screws, wire or other available materials that can be bent into hooks. Then you can proceed directly to stretching the mesh.

To do this, you need to straighten the roll, place it near the first corner post and secure it there by installing it on hooks. In order for the final mesh fence to have the strength of top level, it is necessary to thread a wire with a diameter of 4 millimeters through the first and last row of cells. After the lattice is hung, the wire will also need to be welded to the post.

Installing a mesh fence involves unrolling the mesh exactly one span to the nearest post. After a short distance from the place of attachment with the support, you need to thread a vertical rod with your own hands, using which we will stretch our mesh. If you pull the mesh only with your hands, it will be done unevenly, which will significantly affect the quality of the construction.

It is best to do this with two people: one will pull the grille from above, the other from below. After you have fenced the entire area, you need to bend hooks on all the posts. The finishing touch is to paint the posts for the dacha to avoid rusting them. If you used clamps rather than welding to secure them, then painting the poles could be done before starting work. A sectional fence is secured in the same way as a mesh fence.

Welded mesh for a fence is one of the types of material for fencing a plot of land. Its external characteristics are simple, but its design is more durable than a chain-link. In addition, you can do the installation yourself, since the material is quite liftable.

What types of mesh are there?

Welded mesh fencing may have different sizes cells, wires and general dimensions of the section. There are several types of wire, and the method of making the mesh also varies.

Main settings

The strength of the fabric is determined by two characteristics: the dimensions of the cage and the diameter of the wire. The smaller the cell of the mesh material, the stronger the fence will be. But material with such parameters costs more. Standard cage: 50x50 mm, 100x100 mm (the most common), as well as 150x150 mm, 200x200 mm. Metal grid can be light or heavy, which is determined by the thickness of the wire.

In the first case, the diameter varies between 3-6 mm. Heavy fencing is erected using mesh material with a wire thickness of 8 to 40 mm. Section dimensions ( standard sizes): 1000x2000 mm, 1500x3000 mm, 2000x3000 mm.

Types of mesh

There are several types of mesh material made by contact welding:

• Non-galvanized - without coating, made using black steel wire;
• Galvanized - during production, wire without special protection or galvanized material, respectively, in the first case, the anti-corrosion coating is applied after the fabric has been manufactured;
• Polymer mesh – finished design coated with polymers; both galvanized and non-galvanized wire can be used as a base.

The scope of application of these varieties: strengthening the road surface and other structures, wall decoration, construction of fences. Polymer mesh has proven itself well in domestic conditions - it is used to build fences.

Galvanized material with a polymer coating has the best characteristics: a sectional fence will last longer thanks to double protection against corrosion, and it is more attractive in appearance.

Positive qualities of welded mesh fencing

It is necessary to highlight the light transmittance of the structure. This feature allows you to set up a garden or vegetable garden next to the fence, since the mesh eliminates the possibility of shading the area. Installing a fence with your own hands is faster and easier than most other analogues (from decorative brick, natural stone). And the cost of the fence is lower.

The main stages of building a fence

A fence made of welded mesh is built using the following materials: sections of fence cloth; metal pillars with embedded parts, but you can secure them with your own hands using welding machine; concrete solution.

Scheme of sectional fencing made of welded mesh

Main tools: welding machine, screwdriver (if the sections will be attached to the poles using threaded connection), tape measure, building level, shovel/ hand drill.

Step 1: Marking work

A fence made of welded mesh, like any other fencing, requires preparatory work: cleaning the area, checking the difference in soil surface levels, marking.

The construction of the fence begins with markings. For creating desired line pegs, rope and tape measure are used.

First of all, you should outline the location of the fence. To do this, drive stakes into the corners with your own hands, and string a rope between them. Next, you need to determine the location of the fence posts. They are placed at a distance that is 15-20 cm greater than the length of the section. The reserve is allocated for the embedded parts with which the fence is attached.

Step 2: Installation of support posts

A fence made of welded mesh is usually erected using metal posts. They are strong enough to support the structure of a section made of frame and mesh. In addition, in most cases, the fence is fastened by welding. Another nuance: a metal fence lasts much longer. And if wooden racks If they fail, the fence will have to be repaired ahead of time.

For cooking cement mortar One part cement, one part water and three parts sand are used.

A sufficient cross-section of pillars for a sheet of wire 3-5 mm thick is 60x60 mm. The depth of the holes for the support posts is determined based on data on the structure of the soil and the depth of its freezing. On average, for a mesh fence it is arranged columnar foundation 0.8-1 m deep.

It is important that the support is recessed to a level equal to a third of its length. The holes are dug with a shovel, but you can use a hand drill. This will speed up the work. The diameter of the holes in the soil should be several centimeters larger than the posts.

Welded mesh fences are most often installed by completely concreting the supports. This will further strengthen the structure. To make the solution, sand and cement (3:1) are used. Then the hole is filled with your own hands cement mixture, a pole is installed there and leveled. Spacers are used to secure the support. After a few days, you can continue building the fence.

Step 3: Fastening the fence cloth

The use of rolled mesh requires the use of special clamps or brackets. In this case, a continuous fence sheet is attached. If you plan to use a more durable mesh, prepare a frame made from a corner or profile pipe.

Each pole is installed fasteners 4 pieces each, with which the mesh is attached.

The base material is welded to it with your own hands. The finished section is attached to the embedded parts using a welding machine or using a threaded connection method (bolts, nuts).

The use of galvanized mesh does not require coating paint and varnish materials. But if the section is made by hand, during welding protective covering can be damaged. Then it is necessary to ensure additional protection paint and varnish materials.

The use of welded rolled mesh involves two solutions: cutting the material yourself to make sections; installation of the fence sheet using clamps, no need to cut it.

If galvanized mesh is used for the second option, the installation process will take less time, since there is no need to prepare sections. But in this case, the fence will lose strength.

But the thicker the wire used in the production of the material, the stronger the structure will be. The cell sizes of the rolled mesh are also responsible for this quality.

When constructing a fence, it is not always possible to use materials that have a monolithic surface. This most often applies to those situations where it is necessary to delimit adjacent garden plots in which crops are grown. various plants. In this case, it is most advisable to build a fence from a welded mesh with your own hands. Such a structure will save the neighbor’s and your own territories from shading and will not interfere with the full development of plants, thereby causing discontent among people living in the neighborhood.

Material selection

First of all, you need to choose what type of material the welded mesh fence will be made from. There are four main options, which differ from each other in coating.

Uncoated mesh

It is usually sold in rolls and is cheap. Its use would be appropriate among bushes, since the surface of this fence will very quickly become covered with rust. Painting will be economically infeasible and labor-intensive. On the other hand, if there is dense vegetation at the border of the plots, and you need to protect yourself, mainly from migrating animals, then this option is quite acceptable.

Galvanized mesh

Perhaps the most practical material would be this kind of material. It is not much more expensive than the first one, and taking into account the total price of the entire structure, the difference will be about 10%. After all, the price of the structure includes pillars, hardware and components for concreting the supports.

Galvanized painted mesh

Its coating is applied according to the same principle as on corrugated sheeting. First, the product is galvanized, and the top is also painted. This is a very reliable coating. The only thing it is afraid of is abrasive effects. Rains and watering the garden lead to regular splashing of the soil-containing substance, which leads to the abrasion of the protective layer and subsequent corrosion. Therefore, it is recommended to attach such material slightly above the ground surface, and if it is necessary to seal the lower space, you can build a concrete or other base.

Polymer coated mesh

This type of protection is the most expensive, but also the most effective. It is resistant not only to temperature influences, but also to friction. In the most viewed areas, it is worth using this option, since it has a beautiful appearance and will allow without additional costs isolate the area to the entire required height.

In addition to the fact that the material differs in the type of coating, it can also differ in the method of execution, which can be:

• Welded flat mesh
• Welded mesh 3d for fence

The last name is produced by specialized enterprises, which, complete with this name, supply special poles and fastenings to create an aesthetic and reliable fence.

Preparation of tools and material for sampling

Once the welded mesh for the fence has been selected, you can proceed to preparatory work, one of the stages of which is the recruitment of the work contractor necessary tool. This is an important stage, since the inability to carry out this or that operation will greatly slow down the construction, and the material prepared and laid out on the site will create interference. Therefore, it is best if all the necessary components have already been purchased and delivered to the construction site. Here's what you'll need:

Tools

Surely everyone assumes that you will definitely need basic tools, such as:

• Level
• Pegs
• Roulette

Digging tool

Any means for digging holes that are found on the farm will be suitable. The hole drill can be used either manual or electric. Of the shovels, the most convenient will be the “American” one, since it has a curved end, and this is very convenient when digging holes for posts.

Container for mixing the solution

• Concrete mixer (if available)
• Trough with hoe or shovel (optional)

Tools for installing mesh

• Welding machine (if fasteners will be used with it)
• Drill
• Screwdriver
• Screwdriver
• Bulgarian
• A piece of reinforcement or thin pipe for stretching the mesh

Materials

Let's figure out what materials will be needed to install a welded mesh fence and decide on their choice.

Pillars

It is best to use round or profile pipes with a diameter of 40-150 mm as pillars. It is permissible to use concrete or wooden supports. In the latter case, it would be better to protective treatment wood

Cross bars

To create additional rigidity for the mesh covering, you can use thick wire threaded through the mesh. Also, spans can be attached to pipes or fittings attached between the pillars in the upper and lower parts. You don’t have to do this if the supports are often installed and the mesh has sufficient rigidity.

Wire can be used up to 5 mm. It is recommended to use fittings or pipes for rigid fastening from 10 mm.

Fasteners

To attach the mesh you can use:

• Bolt hooks (best option)
• Self-tapping screws
• Metal plates
• U-shaped clamps
• Brackets with bolts and nuts

Materials for concreting supports

• Cement
• Sand
• Rubble stone, slag or crushed stone

Fence installation

Like any other type of fencing, metal fence You need to start making it from welded mesh in stages.

Site marking

With this procedure, it is necessary to take into account, first of all, the distance between future supports. It depends on their height, the thickness of the selected material, and the parameters of the material that will cover the spans.

The recommended distance in such cases is usually 2-3 meters. A more frequent arrangement of racks will entail additional consumption of material for them; a larger distance will require the use of transverse stiffeners, which will have to save the mesh from sagging. When marking, it is necessary to take into account the dimensions of the rolls or finished sections mesh, as well as the dimensions of the entire area. All these values ​​must be compared and the distance between the supports must be planned so that the joints of the fence covering fall on the surface of the posts.

Installation of pillars

To do this, you need to dig or drill holes in the marking areas. The depth can be within 0.7-1.2 meters. This depends on the size of the posts and the density of the soil. It is also worth considering the landscape of the earth's surface. On slopes, the depth of the holes needs to be greater. This is not only necessary because in such places the soil tends to slide, but also because streams of water flow along inclined surfaces when it rains. This leads to softening of the soil and a decrease in its ability to hold objects fixed in it.

After the pits are ready, prepared supports are installed in them and concreted. In this case, it is necessary to strengthen the installed racks with wedges in order to avoid tilting during the process of pouring and drying concrete.

Mesh installation

Installation is best done no less than 7-10 days after concreting the supports. It was during this time cement composition will gain the required mounting strength. Although many craftsmen install the mesh the very next day, this is not the best option

If transverse pipes will be involved in the fastening, then you need to immediately weld them or attach them with self-tapping screws. It is better if these stiffeners are placed between the sides of the racks that face each other. With a carefully selected size of the jumpers, they will act as spacers and protect the supports from coming together under the influence of the tension of the mesh.

When used against sagging wire, it is threaded after hanging the mesh, but before tensioning.

The diagram below shows various options fastening welded mesh with clamps

The mesh covering of the fence can be attached in several ways:

• Welding
• Using clamps
• By hanging on hooks
• Self-tapping screws and pressure plates

It is important that when attaching the mesh, it is tensioned in a timely manner. If the installation is carried out using hooks or self-tapping screws with plates, then first you just need to hang the material on them, and then tighten it evenly.

When welding fastening, the mesh must be tensioned immediately until final fastening. You need to stretch the material by threading it vertical pipe or fittings mentioned above. At least two people must participate in this process. One produces tension, while the other attaches the mesh to the post. The use of a vertical rigid rod is due to the need to produce uniform tension over the entire height, which will be very difficult to do by hand.

Now all that remains is to decide on the method of attaching the mesh and begin installation

Final actions

After hanging the mesh covering, you need to check the level of all racks, paint the fastening joints (if necessary), pillars, transverse pipes or tensioned wires.

With proper preparation, anyone with minimal training can build a sectional fence made of welded mesh House master. There are several recommendations that will help you get the best results:

1. It is important at all stages to monitor the level of the installed posts and not to apply excessive force when tensioning the mesh.
2. Before painting, any metal surfaces should be thoroughly cleaned with sandpaper, degreased with a solvent and primed. This will ensure the durability of the paint and save you from additional costs in the future.
3. If it is planned to make a concrete plinth under the main fence, then it must be done together with concreting the pillars.
4. When performing any work with cutting and welding mechanisms, one should not forget about the following precautions: own safety and use protective devices and clothes.

Photos of welded fences

We have selected interesting photos welded mesh fences. Please note that the installation and assembly of this type of fence is quite simple and inexpensive. Therefore, this type of fence is more suitable for summer cottages