Our service center provides 24/7 burner repair, boilers and boiler equipment in Moscow and the Moscow region.

Certified engineers of our company carry out quality repairs diesel burners And gas burners of any complexity in the shortest possible time.

In order to identify a defect, a service engineer diagnoses the equipment, after which he reports the cause of the malfunction and a work plan to eliminate it.

Cost of on-site and diagnostics for burner repair

Service	Daily rate, rub	Weekend tariff, rub
Engineer visit service department within a small concrete ring	1200	1400
Travel outside the Small Concrete Ring (per kilometer)	35 rub/km	40 rub/km
Carrying out diagnostics (identifying the causes of the malfunction)	1000	1000
Other works

The day rate is valid from 8:00 to 19:00 from Monday to Friday. Weekend rate is valid on weekends and official days holidays. At increased load service center at night and evening time an additional increasing factor may be introduced for work. The size of the coefficient is specified by the operator when placing an application.

Guarantees

The company is responsible for the quality of the services provided, and gives a 6 month guarantee for the complex of work performed.

By contacting us, you acquire qualified assistants in the repair and maintenance of boiler equipment, gain peace of mind and confidence in your work. safe operation engineering systems your country house.

• Low prices for work and spare parts;
• Promptness of departure and execution of the application;
• Service specialists have more than 5 years of experience;
• Spare parts are always available in stock;
• Service engineers are trained in authorized centers of manufacturers.

Our certificates

VIESSMANN certificate

VIESSMANN certificate

VIESSMANN certificate

How we are working:

1. We accept your call;
2. A service engineer arrives;
3. The service engineer repairs the burner;
4. Cleaning the workplace;
5. Issuing recommendations;
6. Warranty service.

Inflatable boilers and burners

If we divide boilers according to their complexity, the variety of devices they contain, the complexity of diagnosing faults and repairing them, then the least problematic boilers are floor-mounted atmospheric boilers, then wall-mounted, and the most complex are floor-mounted inflatable ones.

Inflatable floor standing boilers consist of two main parts:

- boiler body;

- inflatable burner.

The body of the boiler is, roughly speaking, a cylindrical container into which a flame of combustible fuel is inflated with a burner. The boiler has simple sensors and regulators for the automation system. The boiler body is also a heat exchanger, through which the thermal energy of fuel combustion (gas, diesel, fuel oil) is converted into thermal energy coolant that circulates in its (boiler) walls.

However, the heart of an inflatable boiler is the inflatable burner.

— The burner contains basic automation elements, sensors, and a control unit for the entire boiler.

— The main operating modes of the boiler are configured and regulated in the burner.

— The fuel-air mixture and environmental parameters of fuel combustion are adjusted and prepared in the burner.

— The burner generates diagnostic signals for faults, errors and malfunctions of the boiler.

Repair, adjustment and tuning work is the most expensive and time-consuming - on an inflatable boiler. The most expensive spare parts are for the inflatable burner.

Therefore, all recommendations for the operation of boilers (link to articles on the operation of boilers) for an inflatable boiler are especially important. Compliance with them affects the proper, durable and safe operation of the burner and the boiler body, and affects fuel consumption.

Photo gallery of our works

Gas burner TORCH WS-502- professional portable
gas burner which is used as a source of directional
flame with a torch structure, in which the flame temperature in the zone
the main flame reaches 1300°C.

Professional portable gas burner with piezo ignition for
standard propane-butane cylinder 220 g. (0.5 l). Length 150 mm.
Nozzle diameter 18 mm. Fuel consumption 120 g/hour. Power 1.65 kW

It was purchased from the Gearbest.com store with a 5% discount
ye. Arrived in Ukraine in just 6 days and delivered directly into your hands by courier.
The product was ordered on September 20, on the 22nd of September it was sent and already
On the 28th the parcel was received by Nova Poshta courier. Pleasantly surprised
To be honest, the delivery speed of this store.

IN hardware store I bought a gas cylinder for 1.5 euros.

It was packed in a blister on a cardboard and a standard white bag.

Main characteristics:

Flame temperature approximately 1300-1450°C

Automatic piezo ignition

Energy carrier – gas cylinder chik 220 g

Adjusting the flame intensity

Ergonomic design

A portable gas burner is used for a wide variety of jobs:

For soldering and welding low-melting metals and alloys (lead, tin, zinc, copper, aluminum, gold, silver, etc.);

Melting and welding of glass and plastic products, including plastic pipes, synthetic cords and cables.

For heating various objects, for example, to facilitate the loosening of “seized” threaded connections;

For defrosting locks.

To remove old paint;

To start a fire (fireplace, bonfire, grill, barbecue);

For singeing carcasses poultry, as well as game for hunting;

For defrosting food (meat, fish);

In farming and gardening;

Widely used in workshops, for various works in garages, laboratories;

When sewing clothes;

For architectural decoration.

Connection to the can:

Turn the orange button clockwise. Connect the gas
press the burner to the gas cartridge. Then, to secure
can, turn the gas burner approximately 25° clockwise.

Ignition:

Hold the gas cylinder straight. Turn the orange button to? ? ?
turn counterclockwise and press the button to ignite.
The intensity of the flame can be adjusted.

Stopping the burner:

Turn the button counterclockwise until the flame goes out.

Precautionary measures:

1. Do not point a running gas burner at people or animals.

2. The burner nozzle is very hot during and after operation, so do not
touch it and do not touch it to flammable
materials.

In principle, there is no point in disassembling this burner, since there is nothing interesting there, but for amateurs I removed the casing)

Who cares? video review of gas TORCH burners WS-502C

A gas burner is a highly functional fuel-burning equipment that does not require an electrical connection. This is very important when working on fresh air, on hikes, etc. Despite the fact that such devices have existed for a long time, they active use started several decades ago. As manufacturers improved designs, increased failure tolerance, and improved repairability, gas burners quickly gained popularity. Unlike other portable devices, they have important advantages:

• lower consumption compared to gasoline;
• the injectors do not become clogged, because the fuel has no impurities;
• no unpleasant odor;
• optimal dimensions and weight;
• instant heating.

When choosing a gas burner, you should pay attention to some points:

• absence of strong noise;
• complete combustion of gas;
• ease of use;
• additional functions;
• automatic regulation.

Gas burner - definitely useful device. When purchasing it, you need to take into account the above features, as well as reviews of specific models. Our rating includes best burners for soldering, traveling, equipped with various useful functions.

The best soldering torch with piezo ignition

The gas burner is used in various fields and differs in size, shape, operating principle, etc. One of the most common types is a soldering torch. She is in demand among craftsmen repair work and in household. Internal organization consists of a valve into which gas enters through a special channel and is then mixed with air in the mouthpiece, forming a flame. The most convenient burners are made in the form of a nozzle on a spray can. Their small size makes them easy to take with you. Based on customer reviews, we have compiled a rating of the best gas torches for soldering in all respects.

5 Sparta Turbo

Collapsible model
A country:
Average price: 250 rub.
Rating (2019): 4.6

The main feature of this gas burner is that it belongs to cassette type. A replaceable ignition element, which is located directly in its body, allows you to minimize the time spent on repair work. In addition, among the advantages, users highlight the low weight of the device - 104 grams. You can always keep it at hand or in your bag, where the device will not take up much space.

The product is quite versatile in terms of the range of functions it performs. Using an open flame, you can heat the necessary parts, melt solder, etc. Importantly, there is a useful option for adjusting the flame power. Therefore, optimal consumption of butane from the can is achieved. Among the disadvantages are the nondescript design, lack of a protective cap, big sizes for pocket carrying.

4 Rexant 12-0019 GT-19

Effective temperature regime
A country:
Average price: 400 rub.
Rating (2019): 4.7

The gas nozzle is designed for collet cylinders type TV-220, which are purchased separately. It allows you to efficiently cope with those tasks that require increased temperature regime flame. In this case, this figure reaches 1400 degrees. Taking into account the presence of piezo ignition in the design, as well as the cost of the product, the model can be considered one of the worthy of attention.

The device is designed to operate primarily on outdoors. Butane isobutane is used as a fuel mixture. The structural elements are wear-resistant because they are made of durable materials: copper, zinc alloy, of stainless steel, aluminum and high-quality plastic. With a nozzle diameter of 20 mm, gas consumption is quite economical, only 80 g/h. This allows you to generate power up to 1.1 kW. The weight of the device is 135 grams – another undeniable advantage.

3 DAYREX DR-45

Minimum gas consumption, enhanced security system
Country Russia
Average price: 550 rub.
Rating (2019): 4.8

This is one of the most comfortable devices in terms of price, functionality and protection against gas leaks. It has a compact and easy-to-use pistol shape, suitable exclusively for a collet cartridge. With a gas consumption of only 60 g/h, it produces a power of 1 kW, which is quite enough to carry out necessary work. In this case, automatic ignition works instantly, without delay, but there is no option for preheating the fuel mixture.

The flame length is 145 mm, width adjustment is not provided. Users note better system protection against gas leakage. Thanks to the Anti-leakage function, the most vulnerable junction of the burner and the cylinder is completely safe. The flame temperature reaches 1300 degrees, which does not interfere with rotating the device around its axis without the risk of the fire dying out or reducing its power.

2 Sturm! 5015-KL-01

Best functionality
A country: Germany (manufactured in China)
Average price: 370 rub.
Rating (2019): 4.8

Gas burner in the form of a nozzle for a Sturm spray can! is a universal device that is useful in the most different areas. It is intended for soldering products. With its help, repair work is carried out and the necessary metal elements are heated. You can also easily light a fire, stove and even cook food. The device is easy to use and has a high-quality design. The model is equipped with a double seal and piezo ignition. This allows you to start working with the burner without using matches. Another advantage is flame adjustment. The kit does not include a gas can - it must be purchased separately.

1 STAYER 55584 MASTER

Universal design
Country: Germany
Average price: 300 rub.
Rating (2019): 4.9

The gas burner from the manufacturer STAYER is designed for use on a can with a collet clamp. It is equipped with a function to increase and decrease the flame, which is very convenient when working with different materials. The uniqueness of the model lies in the fact that it is suitable for cooking, repair work, and hiking. That is why the best rating includes STAYER 55584.

Judging by the reviews, the burner does its job well. It is also suitable for heating, tinning, etc. Equipped with another important function- piezo ignition. It's easy to boil water using a torch. The small size of the device allows you to take it with you everywhere.

The best tourist gas burners

Traveling is one of the most common pastimes modern people. Many people will prefer a trip to a tour abroad. beautiful places our Motherland. Naturally, this type of vacation requires some preparation. To cook food or heat water outdoors, you will need a special device. A gas burner is a particularly popular type of portable fuel equipment. She will be an excellent assistant on a hike. Tourist models are lightweight, highly fault-tolerant, and maintainable. The rating includes the best gas burners according to travelers.

5 "Pamir-1"

Model for a large company
Country: Poland
Average price: 2400 rub.
Rating (2019): 4.6

The 2-burner device allows you to comfortably spend time at a campsite or on a multi-day hike. The entire structure rests on high support legs, each of which is adjustable to achieve maximum stability on uneven surface. Through threaded connection a gas cylinder with a volume of 1 to 3 kg is easily connected and placed in the central part of the device, between the burners.

The burners differ in size, so you can place containers with a small bottom diameter as well as large ones on them. This is not only convenient, but also saves fuel. For the same purpose, special valves are provided to adjust the flame level and a heat-reflecting screen round shape. The average gas consumption is 250 g/h. The weight of the device is not the smallest (1.7 kg), but for a traveler big family or the company is quite suitable option power 1400–1750 W.

4 Primus MultiFuel III

Multi-fuel option
Country: Sweden
Average price: 12,000 rub.
Rating (2019): 4.7

The old brand, which laid the foundation for an entire product group and has become almost a household name, offers a new development that can be effectively used outdoors at any time of the year. The main difference of the model is the ability to work with different types fuel. Not only gas, but also gasoline, kerosene or diesel provide the device with a power of 2700 W. It is convenient, especially for beginners, that each nozzle has a power source designation. All together they form a single system that does not fail even in extreme weather conditions.

The travel device is designed for continuous burning for up to 66 minutes at volume gas canister 230 grams. Among the advantages are stable metal support legs that are easy to fold, the presence of an ErgoPump in the set, and boiling 1 liter of water in 4 minutes. However, please note that this model is not equipped with piezo ignition.

3 Pathfinder Atom Energy

Best price
A country: Russia (manufactured in China)
Average price: 250 rub.
Rating (2019): 4.7

Burner domestic production"Pathfinder" was included in the rating due to its excellent technical characteristics, practicality and convenience. This model is ideal for hiking trips. It is equipped with a piezoelectric element that ensures fast automatic ignition. The device is also protected from wind blowing. The design is made so that the dishes cannot tip over.

High stability in all weather conditions – important feature burners. You can take the device with you fishing, hiking and use it at home. In reviews, users name among the advantages high performance, fast heating, strength and reliability.

2 Windproof Camping Stove K-203

Reliable wind protection
Country: South Korea
Average price: 1100 rub.
Rating (2019): 4.8

Such a device is simply irreplaceable on hiking trips or scientific expeditions. When assembled, it measures 14.5 x 14.5 x 11 cm, and when folded it is only 10 x 11.6 cm (diameter, height) and in a branded semi-soft case with a zipper, it fits compactly in luggage. The metal body and blade-shaped base for the burner are practical, resistant to mechanical stress, and quickly ready for use. After connecting to a collet can of butane, all that remains is to use the safe ceramic piezo ignition to get boiling water in a matter of minutes.

Despite the portable type of gas burner, its power reaches 2800 W. At high performance, the device can operate continuously for 10 hours. The advantages of the device owners include its unpretentiousness to weather conditions, excellent windproof qualities, and light weight of 475 grams.

1 Kovea TKB-8911

Quality and ergonomics
Country: South Korea
Average price: 3300 rub.
Rating (2019): 4.9

A travel gas burner must meet necessary requirements camping life. The most popular model is Kovea TKB-891. Weighing only 300 grams, it has good power and does its job well. The manufacturer has improved its device by adding piezo ignition and an enlarged flame crown. This ensures fast heating, ease of operation and prevents food from burning. The burner is suitable even for dishes non-standard sizes. This makes the model popular among large groups of travelers. Slow gas flow is ensured by a special heat-reflecting screen.

Among the advantages reliable materials,folding burner feet, fast heating. The downside is the high price for a 1-burner device.

For operation on natural or liquefied gas. Gas burners are available in various technical categories, up to fully automatic microprocessor control. They have from one to several stages of operation and operate at different gas pressures in the line. Low level noise, economical operation, automatic control - these are the main advantages of operating a burner on natural gas. Like all technical devices, the gas burner requires periodic Maintenance and repairs, which can be carried out based on the table below of the main malfunctions of gas burners.

Burner malfunction and repair

Malfunction: The burner motor does not start.

• Possible reason: No voltage. Low voltage. Circuit break.
• What to do: Check voltage. Install a voltage stabilizer. Find a cliff.


• Possible reason: The red lockout lamp on the burner is on.
• What to do: Press the red lamp until it clicks.


• Possible reason: The air pressure switch is faulty.
• What to do: Check the operation of the air pressure switch.


• Possible reason: The safety thermostat on the boiler has tripped.
• What to do: Unscrew the cap and press the red button until it clicks.


• Possible reason: The boiler temperature is set to low.
• What to do: Check the set temperature on the boiler.


• Possible reason: The software relay is faulty.
• What to do: Replace.


• Possible reason: The capacitor is faulty.
• What to do: Replace.


• Possible reason: Motor is faulty.
• What to do: Replace.


• Possible reason: Low pressure natural gas in front of the burner.
• What to do: Contact the gas service.

Malfunction: The burner motor starts but stops during or after pre-purge and the burner lockout lamp comes on.

• Possible reason: Air pressure switch is faulty.
• What to do: Replace.


• Possible reason: The fan is dirty.
• What to do: Clear.


• Possible reason: The pulse connection of the air pressure switch is clogged with dirt.
• What to do: Clear.

Malfunction: The burner engine starts, the control voltage of the program relay to the ignition transformer is turned on, there is no spark, the emergency lamp lights up.

• Possible reason: Ignition electrode is dirty or worn, insulation is faulty.
• What to do: Clean or replace.


• Possible reason: Incorrect electrode position.
• What to do: Adjust.


• Possible reason: Ignition wire is faulty.
• What to do: Replace.


• Possible reason: Transformer faulty.
• What to do: Replace.

Malfunction: The burner motor starts, after the purge is completed, a malfunction occurs: the emergency lamp lights up.

• Possible reason: Gas valve does not open.
• What to do: Replace the defective part.


• Possible reason: Open circuit or damaged wire.
• What to do: Repair the damage.


• Possible reason: Air in the gas pipeline.
• What to do: Blow out the gas pipeline.

Malfunction: The torch lights up, the burner stops, then restarts.

• Possible reason: Low gas pressure.
• What to do: Contact your local gas company.


• Possible reason: Pressure regulator does not work.
• What to do: Replace gas fittings.


• Possible reason: The filter in the gas fitting is dirty.
• What to do: Clean the filter.

Malfunction: The burner motor starts, a flame appears, then the burner stops and the emergency lamp comes on.

• Possible reason: The ionization electrode did not “detect” the flame.
• What to do: Check the position of the electrode and adjust if necessary.


• Possible reason: No flame signal.
• What to do: Check the correct connection of the phase and neutral of the supply wires, as well as grounding. Adjust if necessary.


• Possible reason: Flame detector is faulty.
• What to do: Replace.


• Possible reason
• What to do: Replace.

Malfunction: Engine shutdown during pre-purge.

• Possible reason: Software relay is faulty.
• What to do: Replace.

Malfunction: Engine shutdown during stop stage.

• Possible reason: The torch does not go out, there is a leak in the valves.
• What to do: Clean or replace.


• Possible reason: Software relay is faulty.
• What to do: Replace.

Malfunction: Formation of soot in combustion products.

• Possible reason: Incorrect air adjustment.
• What to do: Adjust.


• Possible reason: Insufficient draft in the chimney.
• What to do: Check the chimney.


• Possible reason: No supply or insufficient air in the boiler room.
• What to do: Check the supply ventilation.

Malfunction: Heat exhaust flue gases.

• Possible reason: Soot deposits on boiler heating surfaces.
• What to do: Clean the boiler.


• Possible reason: Gas consumption is too high.
• What to do: Adjust gas flow.

The data is provided for indicative information only. All work with gas equipment, such as gas boilers, wall-mounted geysers and other water heating and heating devices, must be carried out by specialists who have all permits and licenses for working with gas and gas equipment. And the most important thing is to have experience working with such equipment, which will help you avoid common mistakes that can lead to the most negative consequences.

Typically, a typical gas furnace has a cast iron burner, a fan, a firebox, and a variety of control equipment.

Purpose of a home gas stove

Gas oven with forced submission air (blowing) to the burners drives air through the heat exchanger using a blower fan. The heat exchanger is heated by gas burners, and warm air goes to the boxes, from where it enters the room.

Diagram of a typical gas stove for a private home. Essential elements:

• blower and system automatic control gas supply;
• burner access panel;
• main gas valve;
• pilot burner;
• main burner;
• control cabinet;
• air filter;
• fan and motor access panel;
• chimney;
• openings for supplying warm air;
• heat exchanger;
• fan motor and fan itself.

The gas pipeline leading to the furnace has a valve that can be used to manually shut off the gas supply. If the tap handle is parallel to the gas pipe, then the valve is open. To shut off the gas, it must be installed perpendicular to the pipe.

Features of the standard manual gas tap:

• the main gas line for the furnace goes up;
• when the handle is perpendicular to the pipe, the gas supply stops;
• at parallel arrangement gas handles are supplied without restrictions.

The gas supply level is regulated by a gas reducer and an automatic regulator. The gas reducer automatically regulates the pressure and, depending on the situation, can increase or decrease it to the level required for work. The automatic regulator is responsible for controlling the gas supply to the burner. In the majority modern stoves these devices are combined into one common fuel consumption control unit. Don't even think about trying to adjust the gas pressure yourself. This should be done by gas company specialists.

Ceramic gas oven Master 450CR.

Service work on gas furnaces and other gas-powered equipment is much more dangerous similar works, say, with electrical appliances or devices running on fuel oil. After all, even the smallest gas leak can lead to irreparable consequences. If you have even a shadow of doubt about the serviceability of your gas appliance, contact your service provider. gas company or your equipment manufacturer.

Pilot burner

The pilot burner is responsible for automatically igniting the gas burner. It is triggered when the room thermostat sends a signal to it, detecting a drop in the room temperature below a predetermined value. It increases the flow of gas to the control burner.

Burner structure

The pilot burner consists of a jet and a thermocouple. Gas enters the nozzle and burns constantly. The thermocouple is a safety device that is located near the nozzle. The burning flame from the nozzle heats the thermocouple, which in turn opens the valve on the gas line with an electric current.

When the required temperature in the room is reached, the thermostat stops sending a signal to the nozzle and its flame begins to fade. The thermocouple begins to cool and stops supplying electricity to the damper, which as a result closes, thereby cutting off the flow of gas from the line to the nozzle and the main burner.

Operating principle of the pilot burner:

• the burner jet produces a flame;
• the flame heats a thermocouple connected to the damper;
• the jets are attached to the mounting bracket;
• The gas pipeline supplies gas to the control burner.

Pilot burners with electric ignition are also available. The gas in them is ignited using an electric spark. When the gas furnace turns off, the main and pilot burners go out. In some burner devices, the gas is ignited by a hot spiral through which it is passed electricity. When the pilot burner gas ignites, its flame closes the electrical contacts, which open the damper on the main gas line and gas begins to flow to the main burner.

Ignition of the pilot burner

Today there are many models of continuous combustion pilot burners. Find out what kind of pilot burner your furnace has. To do this, carefully inspect it and study the manufacturer’s operating instructions.

As a rule, most modern furnaces are equipped with pilot burners with a combined automatic reducer and regulator. If you need to light such a pilot burner, remove the outer panel and check that the regulator is closed and the power supply is turned off. If you smell gas, wait a few minutes for the area behind the panel to ventilate. If the gas does not clear, call your gas service immediately.

Disassembled pilot burner with igniter and injector.

Next, set the thermostat to the lowest position and remove the cover from the burners. The control knob must be turned with the arrow towards the inscription “pilot burner” and by pressing it, bring the burning match to the nozzle. The gas should ignite instantly. Do not release the control knob until the thermocouple is sufficiently hot.

After this, the handle can be released and the lid returned to its place. Then set the arrow knob to the “on” position and turn it on in the oven electrical circuit. Next, return the panel and closing control devices. The thermostat must be set high enough to turn on the main burner.

Standard reducer-regulator and its main components:

• gas main;
• reducer-regulator;
• handle for ignition control;
• thermocouple case;
• use the handle to supply gas to the nozzle, then the gas is ignited with a match;
• flame adjustment screw;
• gas line to the jet;
• gas line to the main burner;
• thermocouple;
• jet.

If you are unable to light the pilot the first time, try again after waiting a while for the gas from the previous attempt to clear. If the second attempt is unsuccessful, this is not good and most likely the problem is not in your hands, but in the burner. It is recommended to contact your gas service. Most likely the thermocouple is faulty and needs to be replaced.

These gas stoves are very often used in modern baths.

In older models of furnaces, the gearbox and regulator are separate. The ignition procedure is basically the same as modern models, but there are slight differences. It consists in the fact that to ignite the burner, you first need to open the gas supply using the gas valve handle, and then press the constant-burning burner control button, which is often painted red, and bring a burning match to the nozzle. Do not release the red button until the flame heats the thermocouple sufficiently. This usually takes about a minute.

Adjusting the flame in the pilot burner

To determine the location of the screw responsible for regulating the flow of gas into the burner, study the manufacturer’s operating instructions. It is very important that the flame is of the required intensity. After all, if there is too little heat, the thermocouple will not heat up, and when you release the button, the burner will immediately go out. And if the flame, on the contrary, is too large, then the thermocouple will fail faster than usual.

If you still cannot light the burner, the reason may be that the torch is too small or the nozzle is dirty. Try cleaning it with a wood chip or toothpick and removing dirt with a soft brush or cotton swab. You can also use a vacuum cleaner for this purpose.

The pilot burner nozzle can be cleaned with a regular soft toothpick and brush.

Techniques for servicing a gas burner

A gas burner, like any equipment, needs cleaning from time to time. after-sales service. However, today many codes technical work It is strictly prohibited to intervene independently in work and repairs. gas appliances and devices. Therefore, it is often necessary to resort to the services of professional specialists.

However, this fact cannot prevent us from reviewing some valid preventative procedures that can significantly improve the efficiency of your gas burner.

Cleaning the firebox

Make sure that inner space the fireboxes, burner, and control equipment were kept clean. Periodically vacuum the firebox and clean the control equipment from dust.

Vacuum both the column and the burner itself from dust. The jets are cleaned with a brush.

Engines with lubrication points must be lubricated with a small amount of oil.

Shutting off the gas main valve

Always at the end heating season When there is no longer any need to operate the stove, turn off the gas main valve.

The handle of a closed tap should be perpendicular to gas pipe. If your gas is in a cylinder, close the shut-off valve on it.

Finding leaks

Be sure to check pipes and equipment for gas leaks. The location of the leak can be found by smell. Special substances are added to the gas entering your home, which gives it a characteristic pungent odor.

If there is a leak, turn off the gas valve and immediately call the gas service.

Examine the torch flames

At the beginning of the heating season, when you start the furnace, look at appearance flame torch. It should be blue-green in color.

Check the color of the torch in the burner.

If there is something wrong with the torch, call a technician who will adjust the supply of the gas-air mixture correctly. The pilot burner flame length should be 13 mm. It can be adjusted using a screw.

Joint density

Be sure to check the tightness of the chimney joints and the presence of holes in it. Those sections that have holes need to be replaced.

To check the pressure regulator, main gas valve and safety valve Call a professional every few years. To determine the efficiency of a gas furnace, the technician must also check the draft, the temperature of the exhaust gases and the level of carbon dioxide in them.

Video on choosing a gas heater

Choose best heater gas type for your home - and this video review will give some very useful tips.

Free-standing gas heating stoves (fireplaces)

These gas stoves have a very similar appearance to wood stoves. The chimney design of both stoves is also approximately the same. Modern models gas furnaces are highly efficient heating equipment, which produces a large number of heat.

A free-standing gas fireplace is a real addition to any interior.

The burners in such stoves look like burning logs, which can be seen through the transparent door. When purchasing such a stove, you should also be provided with instructions for installing it, as well as an operating manual. The outlet pipe is routed in the same way as the pipe in wood stoves, i.e. into an existing one in the house brick pipe, fireplace chimney, wall and roof.

The heating gas fireplace fits perfectly into the Victorian style.

For gas stoves there are also established requirements for their location relative to the floor and walls of the room. Despite the fact that wood and gas stoves are subject to the following requirements in the code: different requirements, their smoke exhaust systems are similar to those shown in the diagrams above.

A gas stove of this design can stand right in the middle of the room and will not disturb anyone.

The free-standing gas stove harmonizes perfectly with the white design of the room.

The wall-mounted gas fireplace, unique in its design, will not leave anyone indifferent.

Simple free-standing gas fireplaces with a minimalistic feel.

Free-standing gas stoves are similar to those used in , equipped with a pilot burner and ignited in a similar manner. Accordingly, exactly the same safety rules apply to it.

However, in any case, follow the rules prescribed in the manufacturer's instructions. If the pilot burner does not light for more than five seconds when igniting the oven, turn off the oven, ventilate any accumulated gas, and try again. If you don’t succeed the second time, call the supplier’s representative.