Fences made from mesh are very popular; they are indispensable in cases where you need a reliable fence with good light transmission and a low price. In addition, modern fences made of welded galvanized mesh are very attractive, durable and easy to install with your own hands.

Classical country fence made of galvanized welded mesh

Advantages of galvanized mesh

They produce galvanized mesh from metal wire. Its rods are arranged perpendicularly and are fastened at the connection points by welding. The cells of the welded mesh are made rectangular, square, less often diamond-shaped, trapezoidal or other shapes. The wire for the mesh is galvanized or with additional polymer coating.
Fencing made of welded galvanized mesh has its advantages:

Types of welded mesh fences

Depending on the type of coating, it is presented in the following types:

Galvanized mesh can also be produced in the following types:

Drawing of a section of a fence made of galvanized mesh

How to choose a galvanized welded mesh fence

Features of installing a fence made of galvanized mesh

There are two ways to install galvanized mesh:

• Tension of the fabric between the pillars;
• Installation of sections.

The first option is cheaper and easier to do yourself. But the second option is considered more aesthetically pleasing and stronger.

If you do not purchase ready-made welded spans, you will have to make the sections yourself from angles or profiles.

Fence posts can be either or. Of course, if you build thoroughly, you should use steel supports with a cross-section from 6 to 12 cm.

Installation of pillars

Installation of mesh on supports

To tension the rolled mesh, hooks are welded onto the posts. Also, special poles with hooks can be purchased ready-made.
The galvanized mesh is hooked onto the first post and stretched with tension to the next support and put on the hooks again.

One of the options for attaching fence sections to posts

To make a galvanized mesh fence stronger, a wire with a diameter of 4 mm is threaded through its top and bottom. The wire is welded to the post.
It is difficult to pull the mesh evenly with your own hands, so it is advisable to invite an assistant and, by threading a crowbar or rod through the bottom and top of the welded mesh, pull them. After installing the fence, the hooks are bent.
A sectional fence is either welded to posts or secured using pipes and clamps.

Did you know that not all types of fences are allowed to be installed between neighboring areas? This is due to the fact that high monolithic fences constantly shade the space. Considering the small size modern dachas, almost every plant in the garden will grow sluggish and weak. As a result, you may constantly encounter complaints from neighbors. What to do in such a situation? An excellent solution would be to use a mesh that will not be an obstacle to sunlight and air masses.

A similar mesh fence is used not only for summer cottages, but also for fencing sports facilities, technical areas, reservoirs, and so on.

Principles of fence installation

Modern construction technologies provide two options for how to build a fence from welded mesh with your own hands. The first option involves tensioning it between the pillars. In the second option, it will be necessary to make corners into which the mesh fragments will be fixed. The first option is much easier to implement, but it is less durable and aesthetically attractive.

To produce sections you will need additional financial resources. The cost of the corner can significantly exceed the cost of the grate itself.

In any case, installing a mesh fence involves the use of posts.

The pillars can be made of wood or metal. The first option is distinguished by its cheapness and availability, but it cannot boast of great durability. Purchase wooden supports, making fences from mesh is necessary only if their cost will be several times less than their metal counterpart, or you want to install only a temporary fence. There are also situations when wood remains after building a house, and you don’t want to throw away the material. To avoid unnecessary expenses, you can use existing poles.

The most preferable option for a dacha is to use metal poles for mounting. They are characterized by high reliability and durability. In the majority of cases, pipes with a round or square cross-section are used, the diameter of which ranges from 6 to 12 centimeters. The thickness of the pipe wall should not be less than 2 millimeters. To reduce the cost, it is recommended to purchase pipes directly at a scrap metal point, where you can often find good specimens water pipes. A DIY mesh fence will not be damaged.

Principles of territory marking

First, you need to install temporary pegs in the corners of the site, between which you can stretch the construction thread. The length of the cord will be the length of the required mesh, but it must be purchased with a margin of 1-2 meters. After this, we designate the places where the pillars will be located. The optimal distance between tables is considered to be from 2 to 2.5 meters. A larger distance should not be allowed due to the deflection of the lattice.

It is worth noting that on a site with a sufficient slope it will be impossible to build a fence from a mesh, because it is not possible to secure it properly in an inclined position.

The only way out of this situation is terracing the site, which involves installing poles of greater length and power in places where there is a difference. On one side of the post the grating will be mounted at a higher level, on the other - lower. To do this, the mesh will also have to be cut. You can also mount sectional fence for the dacha.

Pole installation process

In the places designated for the pillars, it is necessary to dig wells using a special drill or shovel. A sectional fence made of welded mesh will otherwise be unstable. The depth of each well should be in the range from 1.2 to 1.5 meters. It is worth paying attention that the depth of the pit should exceed the freezing depth of the soil by 20 centimeters. First of all, it is necessary to install corner pillars, because the greatest and uneven pressure will be exerted on them. Before installation, a drainage layer of crushed stone and sand must be placed in the well.

The installed support must be vertical. This can be checked using a plumb line or level. Only after this can the holes be filled with your own hands using a special solution. The solution should not be very liquid, otherwise the structure will not be strong enough. Further work that a DIY welded mesh fence requires can be carried out only after the concrete has completely dried.

Installing the mesh directly

After the concrete has dried, it is necessary to use welding to weld hooks onto the posts, to which our mesh will ultimately be attached. To organize with a hook, you can use nails, screws, wire or other available materials that can be bent into hooks. Then you can proceed directly to stretching the mesh.

To do this, you need to straighten the roll, place it near the first corner post and secure it there by installing it on hooks. In order for the final mesh fence to have the strength of top level, it is necessary to thread a wire with a diameter of 4 millimeters through the first and last row of cells. After the lattice is hung, the wire will also need to be welded to the post.

Installing a mesh fence involves unrolling the mesh exactly one span to the nearest post. After a short distance from the place of attachment with the support, you need to thread a vertical rod with your own hands, using which we will stretch our mesh. If you pull the mesh only with your hands, it will be done unevenly, which will significantly affect the quality of the construction.

It is best to do this with two people: one will pull the grille from above, the other from below. After you have fenced the entire area, you need to bend hooks on all the posts. The finishing touch is to paint the posts for the dacha to avoid rusting them. If you used clamps rather than welding to secure them, then painting the poles could be done before starting work. A sectional fence is secured in the same way as a mesh fence.

Some dacha cooperatives do not provide for the installation of between plots or any other similar material, since such structures shade small plots. In this case, a fence made of welded galvanized mesh becomes an excellent solution. It will not prevent ultraviolet radiation from entering the site, will not impede natural air circulation and can be erected by any summer resident.

Preparation

The chain-link represents inexpensive material, which is ready to last quite a long time. An additional advantage is the ability to use it as a support for climbing plants. This mesh was invented at the end of the 19th century, but is still widely used today. Every consumer can purchase it.

To create a fence, in addition to the mesh, you should prepare reinforcing bars, thick wire, and cable. When choosing a grid, you should pay attention to the size of the cells. The smaller it is, the more expensive the mesh will be, but also stronger. If the mentioned parameter is equal to the limit from 40 to 50 mm, and the roll width is 1.5 m, then this material will become great solution to create a fence for a summer cottage.

Tension fence

A fence made of welded galvanized mesh can be tensioned. This method of making it is the simplest. After all, the material will have to be stretched between the pillars, which can be made of the following materials:

• concrete;
• wood;
• metal.

The number of supports will depend on the pitch between them and the length of the fence itself. The best distance is 2.5 m. Pipes can be used as pillars, but they must not be damaged by corrosion. On sale today you can also find ready-made poles that have hooks and a painted surface. Before installation, it must be treated with a protective compound.

As alternative solution The mesh protrudes towards them and is fixed with a clamp or wire. The height of the pillars must be calculated. If the clearance between the ground and the fence is 5 to 10 cm, then the underground part of the support and the width of the mesh should be added to this parameter. The load on the corner pillars will be greater, so they need to be placed deeper than the others. Therefore, their length should be 20 cm greater than the length of ordinary pillars.

When making a fence from welded galvanized mesh, you must concrete the bases of the supports to increase strength. The pillars will form the frame of the structure. After installing them, you can begin fixing the mesh. As soon as the concrete hardens, hooks are fixed to the posts or welded if the post is metal. The material for fastenings should be:

• wire;
• nails;
• rod;
• screws.

You can use any other material that bends into hooks. At the same time, the roll is straightened and installed at the corner support, the mesh must be hung on the hooks.

The roll needs to be unwinded one span to reach the next post. The rod is threaded a little further than the place where the mesh will connect to the post. The master should hold the rod and tighten the mesh. If a rod is not used, the mesh may not be tensioned evenly.

It is better to carry out this work with the help of another person. He will hold the grid at the bottom edge, while the other master will hold the grid at the top. At the next stage, reinforcement is threaded into the mesh; it is necessary to retreat 5 cm along the edges. When installing a fence made of welded galvanized mesh, it is necessary to weld horizontal rods or attach them to posts.

Without using rods, over time you will encounter the fact that the mesh will sag. When the technology is followed, rods are used to maintain tension. The mesh should be pulled further according to the principle described above, fixing and pulling the rod or wire. At this point we can assume that the fence is almost ready. The hooks are bent on the posts, the last of which are painted. It is recommended to fold the wire antennae downwards to reduce the risk of injury. The wire is usually threaded through the top edge of a row of cells, and the protruding edges should be wrapped around it.

Sectional fence

To build a sectional fence, you will need sections where the mesh will be installed. At the first stage, you should use a technology that is similar to that described above. To do this, the area is marked out, and then poles are installed.

Installation of a mesh fence will involve the use of a corner whose dimensions are 40 x 5 mm. These elements will be needed to make the frame. Its length is determined taking into account the distance between the pillars; 15 cm must be subtracted from this value. The same amount should be subtracted from the height of the pillar above the soil level. This will give you the width of the frame.

The corners need to be welded into rectangular structures. The size of the sections is made taking into account the size of the mesh, which varies from 1.5 to 2 m. Galvanized welded mesh in rolls, if necessary, can be cut with an angle grinder.

Work methodology

At the next stage, metal strips are welded to the pillars. They should be placed horizontally. Their length can be from 15 to 25 cm. As for the width and cross-section, they are 5 cm and 5 mm, respectively. With a deviation of 20 cm from the edge of the post, it is necessary to install a section between the two supports. Welding is used for this. At the next stage, you can start painting the fence.

Fence cost

Quite often, summer residents and owners of territories within the city ask themselves the question of how much a galvanized mesh fence costs. If the width of the material is 1.5 m, then you will have to pay 310 rubles for such a fence. per linear meter. Using a mesh whose width is 1.8 m, specialists charge 390 rubles for their services. per linear meter.

Pulling reinforcement will cost the consumer 40 rubles. per linear meter. You may also be interested in the question of how much a fence costs. If its length is 50 m or more, then you will have to pay 355 rubles per linear meter. This price is correct for structures in which the reinforcement is installed in one row. The mesh width is 1.5 m. This parameter will be equivalent to the height of the fence. If it increases to 1.8 m, then the cost will rise to 415 rubles. The price includes metal supports, pulling reinforcement in one row, galvanized mesh and installation work.

Mesh cost

If you decide to do the work yourself, you can inquire about the cost of the mesh. If the diameter of the wire used is 1.2 mm and the mesh size is 10 x 10 mm, then pay for square meter the material will cost 455 rubles. The price per roll will be 6825 rubles.

Galvanized mesh, the cell size of which is 20 x 20 mm, will cost the consumer 234 rubles. per square meter. In this case, the diameter of the wire used is 1 mm. But the price per roll will be 7020 rubles. With an increase in cell size to 25 x 25 mm, the cost increases to 416 rubles. per square meter. In this case, the wire diameter is 2 mm, and the price per roll will be 12,480 rubles. Galvanized welded mesh 50x50 mm will cost the consumer 312 rubles. per square meter, while the price of the roll will be 7020 rubles, and the wire diameter will be 2.5 mm.

Conclusion

Galvanized welded mesh in rolls will be an excellent material for making a fence. It is easy to cut, it is quite simple to pull it between support pillars In addition, it is durable. And in some cases, a mesh is the only correct solution when it is necessary to fence an area, but it is necessary to provide access to sunlight.

Often for fencing parks, gardens, personal plots Welded fences are used. They are not as beautiful as forged sections, but despite this they are in demand and popular. There are many types of welded fencing, they differ from each other in installation features.

Advantages of a welded fence:

• has strength and durability;
• depreciation when reflecting an impact (for example, if a car drove into the structure);
• fireproof;
• does not cast a shadow on plants growing nearby;
• in combination with climbing plants you can create landscape compositions.

• does not protect from wind, dirt and prying eyes;
• needs anti-corrosion treatment;
• installation requires skills in working with a welding machine.

More details can be found in the video:

Types of welded fences

On construction market the buyer can find many options for welded sections. Experts divide them into:

Reinforcing welded fence is the simplest and most economical option. Pros: simplicity of manufacture and ease of installation. Cons - looks unattractive in appearance. Typically, reinforcement fences are installed as temporary structures.

One more budget option The fence is a welded fence made up of sections - this is a more advanced version of reinforcement fencing - reinforcement or profiled pipes are placed in a frame prepared in advance. Its installation is quite simple and does not take much time. Outwardly, it looks aesthetically pleasing and attractive; in addition, such a fence will protect your area from the invasion of uninvited animals.

A welded metal fence made from a metal profile looks much more aesthetically pleasing and attractive. The manufacturing process is more labor-intensive and requires significant financial costs, but in the end you will get a durable and attractive design. Lovers of privacy will be especially pleased with this version of the fence, because the sections made of metal profiles are opaque. But gardeners and vegetable gardeners consider it a disadvantage that due to the shade, trees cannot be planted near the sections garden crops, because it will interfere with their normal growth.

Welded fences with decorative finishing the most beautiful, but it is also quite expensive. Many craftsmen do the decorating themselves, this allows them to reduce the cost of the process.

If you don't think about financial side question, then you can order a forged fence. It will serve you for as long as possible, and you don’t have to worry about it being damaged by corrosion. Another advantage of a forged fence is that it does not require decorative elements.

You can buy a ready-made welded fence or make sections yourself.

We make a welded fence with our own hands

Suitable for supporting posts under a welded fence natural stone, brick, metal, profile pipes 15x15 or 40x20 mm, or steel strips 25x4 mm. If used for support metal pipes Not large diameter, then they may not withstand the weight of the structure and bend. Large diameter pipes do not look very attractive, so experts recommend choosing square profiled pipes. Their ribs create rigidity of the structure and give additional strength and resistance to bending.

Before installation it is necessary to carry out preparatory work- measure and mark the area for fencing, cut metal structures required sizes, dig the foundation, install the posts and fill the base.

Supporting posts should be located at a distance of up to two meters from each other. In this case, the spans between the posts must be even, so calculate this way: measure the distance between the edges of the area, divide it by two, and you will get required amount columns.

Then you need to calculate the height of the columns. If you install a fence made of metal profiles, then its height will be equal to the height of the sheet. In other cases optimal height one and a half to two meters is considered. A fence of this height will protect you from the invasion of neighboring animals and uninvited guests. The height of the posts should be 40 centimeters longer than the sections (the posts go into the ground to this length).

Pipes are for sale standard length 3 m, 4.5 m, 6 m. For a fence above two meters, three-meter pipes are suitable, and supports of other lengths can be cut into required sizes right in the store - cutting is inexpensive and makes transporting the material much easier.

When the pipes have been purchased, you can proceed to next stage work - preparing holes for the foundation. You can dig them with a drill (garden or electric) with an auger diameter of 20-25 cm, the depth of the hole should be 40 cm. Insert pillars into the dug holes and drive them 30 cm into the ground. When performing work, do not rush and do everything gradually, because it is important so that the support is perfectly level.

Then you need to prepare concrete mortar(the ratio of cement and sand is 1:3), broken stone or small crushed stone is added to it for strength. For additional stability of the structure, the pit is filled in sand-crushed stone cushion by 10 cm. Fill the holes with solution and leave for 3-5 days.

Installation of reinforced welded fence

Necessary tools: apparatus for welding work, a set of electrodes, a metal saw or grinder, gloves.

The reinforced fencing structure is unreliable; it is used as a temporary structure. For more robust construction you need to use reinforcing bars with a diameter of more than 1 cm or profiled pipe.

The fence is installed in stages:

• dimensions are measured;
• pipes or fittings are cut;
• welded.

It is also necessary to resolve the design issue. It is easier to mount the pipes horizontally to the ground surface, but often the rods are installed parallel to the posts. If you choose the first option, then the length of the pipe should be equal to the distance between the supports, and if you choose the second option, the height of the pillar. Also, for the second option, you will need two pipes that need to be welded to the posts - they will be the base for all the rods.

First of all, the supporting beams are welded. When performing welding work, ensure the continuity of the seam - if there is poor contact or the hand breaks, it is better to beat off the part and weld it again. Then rods are welded to the crossbars; they must be at the same distance from each other and have equal length. Which side to weld on - internal or external? technical specifications it doesn't matter, it all depends on your desire.

Installation of a sectional welded fence

A sectional welded fence is mounted in much the same way as a fence with mesh. Some people weld the mesh to them immediately after installing the posts, but doing this is extremely undesirable for a number of reasons:

• such a structure is easy to damage;
• the mesh quickly deforms and begins to dangle;
• The mesh is easy to bend and crawl under.

Therefore, sectional fencing is more practical than a fence with a mesh. Step-by-step installation looks like this: installation of the frame, fastening of the ceiling, installation of sections.

To build a frame it is better to use metal corners, firstly, they are lighter than pipes, and secondly, they hide the weld seam. The height of the frame should be the same as the fence, and the width should be 5 cm less than the distance between the supports. Outwardly he has rectangular shape. For the ceiling, reinforcement, profiled pipe or mesh is used. The last option has the least weight, so it is chosen most often. Whatever flooring material you choose, you need to cut it according inner corner and weld all over inner surface corner. Make sure that the weld seam is continuous - you cannot tear off your hand while welding, as you will not be able to weld the rod or mesh again later.

If earlier in the time of our grandparents we didn’t think long about what to make a fence from and chose wood or stone, but today the development of industry allows us to choose from a fairly long range of different building materials.

Continuing the topic of various fencing, today we will look at an option such as a fence made of welded mesh, its main advantages, types, cost, as well as the method of self-installation.

After reading our article, you will acquire useful knowledge that will allow you to better navigate among various types fences

Characteristics and types of welded mesh for fence

I think you can imagine what a regular grid looks like. In our case, this is an interweaving of metal wire at right angles, welded at the points of contact of the elements (method spot welding). The result is a canvas, which is usually sold in rolls, with square or rectangular cells (but can also be found with rhombic, trapezoidal and other shaped cells).

The weight of one roll varies and is within the following limits: from 50 to 500 kg. Also, a roll can be from 15 m to 33.3 m, height - up to 2 m. When purchasing, you should pay attention to the cell size, as well as the diameter of the wire.

In addition, everyone knows that metal tends to rust when exposed to moisture. Therefore, the wire is usually coated with protective materials, which increases its service life many times over.

The following types are distinguished:

• Welded fence mesh with polymer coating (polyvinyl chloride). She usually has green color, but can also be supplied in other colors. It is first welded and then coated by dipping into polymer or powder paint is applied in special cabinets.
• Galvanized welded mesh. The coating can be applied in several ways (electrolytic, hot). Moreover, the order of assembly and coating may be different. First they weld and then galvanize and vice versa. Rolls are usually packaged in paper.
• Non-galvanized mesh. For its manufacture, steel wire with a diameter of 1.2-10 mm is used. It is also suitable for making fencing. It is usually supplied in plastic packaging (China) or without it (for example, Ukraine).
• Welded mesh, which is first galvanized and then polymer coated. This is the most durable option, but also the most expensive; not everyone can buy it, and for a fence there is no need to purchase such a strong mesh.

The price will depend on the type of coating, cell size and wire thickness. For example, welded mesh 250x50x2, 8 galvanized 1.725x118 (204 sq. m per roll) will cost about 250 rubles. per sq. m. PVC mesh 25x25x1.4 green (roll size 1x25m) costs approximately 195 rubles. per sq. m.

Why is this material chosen for making a fence?

Firstly, a sectional fence made of welded mesh is lightweight, it is durable and resistant to various adverse weather conditions.

Secondly, you can install the fence yourself, which is not very difficult.

Thirdly, the optimal price-quality ratio will satisfy you fully. Also like this option will do for those who do not like solid fences, because the mesh does not create shadows, and if the territory of the site offers a picturesque view that you do not want to hide, then this option is one of the few suitable in this case.

Today, a metal fence made from 3D welded mesh has become very popular. Originally curved wire rods create a three-dimensional effect and give the fence a relief.

Installing a welded mesh fence with your own hands

It is best to use metal poles. All materials necessary for fastening the mesh and posts are also on sale: a bracket with a bolt and nut, a base for a post for installing a fence on a concrete or other base, a connecting clip for joining panels and others.

Installation of any fence begins with marking and setting out the fence line using pegs, rope and tape measure. To install the posts you will need professional level. You should also keep in mind that they should be located at the same distance from each other, and also preferably have the same height.

After that we dig holes for the pillars. They should have a depth that is 1/4 of the length of the post. Also take into account the depth of soil freezing, which may differ and depend on the region in which you live. If it is significant, then it is advisable to dig a hole deeper than this indicator.

Insert a post into the hole and pour concrete mortar. It needs to be secured with spacers to maintain the vertical direction. All pillars must be carefully fastened and secured; the corner ones and those to which the gate and wicket will be attached must be especially strong, because they will bear additional load.

After a day you can begin installing the welded mesh. To do this, you will need a special bracket, which is applied to the post, clamping the mesh, and secure the structure with a bolt. You can also use U-shaped clamps to secure the mesh using a screwdriver.

The fence is ready and will serve you for many years without requiring special care.