Premium German brand on the Russian market since 1995. With VEKA you get the real thing German quality from a company with 48 years of history around the world.

• ALL profile systems of the highest class “A”
• ALL are made frost-resistant and marked with the letter “M”
• ALL have a maximum 4-way steel reinforcement
• Uniform quality standard regardless of country of production

The more air chambers, the less air exchange and, accordingly, the higher the thermal insulation.

The wider the profile and the greater the installation depth, the higher the thermal insulation.

Profiles ONLY of the highest class “A”

According to the thickness of the internal walls, ALL of our profiles are of the highest class “A” - the thickness of their front wall is at least 3 mm.

• class “A”: front wall not less than 3.0 mm
• class “B”: front wall not less than 2.5 mm
• class “C”: wall thickness is not standardized

Please note that 80-90% of the Russian market are classes “B” and “C” and only 10-20% are class “A” profiles. At the same time, VEKA’s assortment includes ONLY class “A” profiles.

We fundamentally DO NOT use profile systems of classes “B” and “C” (with a front wall width of less than 3.0 mm).

ONLY frost-resistant profiles

According to GOST 30673-99 “PVC profiles for window and door blocks” in terms of resistance to climate impacts ALL of our profiles are “frost-resistant” - for areas with an AVERAGE monthly air temperature in January BELOW minus 20°C.

GOST standards for different classes:

• normal version “N”: the average temperature in January is minus 20°C and above
• frost-resistant version “M”: the average temperature in January is lower than minus 20°C

Our assortment includes ONLY frost-resistant profile systems marked with the letter “M”.

Heat transfer resistance (thermal thermal resistance) is the main thermal insulation coefficient. It is determined by the ratio of the temperature difference between the outside and inside the room to the heat flow passing through the window. The higher this number, the better efficiency thermal insulation.

Evolutionary double-glazed windows SmartGlass 2.0

Our multifunctional double-glazed windows work for you both in winter and summer. In winter, spraying silver particles retains up to 90% of thermal energy heating devices, and in summer a double-glazed window reflects 25% more solar heat than conventional ones plastic windows.

• 42% more HEAT in winter (energy saving properties)
• 25% less HEAT in summer (sun protection properties)

All our double-glazed windows contain special energy-efficient glass. We DO NOT use regular glass even in the most basic configurations.

AirDrive I, II and III climate control systems

Optimal ventilation mechanisms are built into the windows - the sashes open slightly by 1-5 mm, depending on the selected mode. Is not external devices(combs or valves), namely BUILT-IN ventilation fittings.

Three options:

• AirDrive I: slot ventilation (1 mode)
• AirDrive II: discrete multi-stage ventilation (3 modes)
• AirDrive III: discrete multi-stage ventilation (5 modes)

We try not to put combs because of them appearance(only at your request). In principle, we do not use valves due to the fact that they violate the integrity of the window, reduce its tightness and strength (since the profile and its reinforcement are drilled through).

MAXIMUM steel profile reinforcement

Reinforcement is steel frame inside PVC profile. This is what gives the structure rigidity. The more steel and stiffening angles, the more reliable the window geometry.

Types of reinforcement:

• Square – 100% reinforcement on 4 sides, 4 stiffeners (maximum)
• U-shaped – 75% reinforcement on 3 sides, 2 stiffeners (regular)
• L-shaped – 50% reinforcement on 2 sides, 1 stiffener (very, very bad!)

All our profiles are reinforced to the MAXIMUM - on 4 sides and always with 4 stiffeners.

VEKA technologists managed to achieve a compromise between the unpretentiousness of the matte texture and the spectacular gloss.

Pleasant shine and low sensitivity to external influences are the most noticeable feature of our window systems.

The VEKA profile complies not only with Russian GOST, but also with European standards building standard RAL.

We bring to your attention an innovative high quality product. It is called the Plus system. The thing is that this profile combines additional properties and modern technologies. The main advantages of the profile include:

* Smooth surface that is easy to care for;

* For better drainage, a beveled rebate is designed at the frame and sashes;

* The internal profile space is optimized taking into account innovative technologies used for reinforcement;

* The special arrangement of air chambers inside the profile provides excellent thermal insulation and heat-saving properties;

* The use of innovative technologies and new ideas embodied in the profile design have made the Plus system a profitable investment.

Scope of profile application:

* During the reconstruction of old buildings and during the construction of new ones;

* Production of balcony blocks;

*Erection various kinds building structures.

PVC windows with comfort profile L-600

It has a construction depth of 60 mm and four air chambers. This combination is considered very rare, but at the same time it has many advantages over three-chamber profiles with a similar construction depth. Thanks to the use of glazing beads, it is possible to install insulated double-glazed windows in such profiles, the thickness of which ranges from 4 to 34 mm.

Using this profile, you can ensure high thermal insulation in the room, as well as a complete absence of extraneous sounds. The manufacturer was able to achieve this using the LG Hausys L-600 four-chamber profile, which meets the highest European standards.

Low height PVC profile provides an increase in the light opening of the window. To seal the window and prevent drafts, a double rubber circuit is used, which also protects the room from moisture and dust. The use of anti-burglary systems and reinforced reinforcement created a high degree of protection against penetration and burglary. For use in a wide range temperature range the manufacturer uses additives that are added to the profile during its production. This significantly extends the service life, as well as the properties and quality PVC characteristics profile.

LG profile system

LG Chem began its historical development in 1947 operating under the name "Lucky Chemical Industrial Corporation".

• In 1962, one division was allocated from the staff of the company "Lucky Chemical Industrial Corporation" for the production of PVC products and this division was officially registered under the name "Lucky".
• In 1982, the expansion of the production plant was completed PVC products,
• In 1987, a plant with a production capacity of 300,000 tons of PVC was put into operation,
• In 1995, it was decided to change the name of the company to LG Chemical Ltd,
• In 2000, the Hyundai Petrochemical plant was acquired to produce PVC products in the United States.
• In 2001, production volumes were further increased by 90,000 tons of PVC products,
• In 2003, a decision was made to increase the production volume of PVC products to 500,000 tons at the plant in Yesu (South Korea).
• In 2004, a decision was made to enter the Russian market with PVC profiles produced in Jeongju (South Korea).

To best meet consumer expectations, LG Chem has developed its internal quality management system, which should significantly change the balance of power in the production, management and distribution of its products around the world, with the main goal of increasing the range of products, improving their quality and timely delivery to the consumer. Not being satisfied with compliance with the requirements of ISO 2001, along with such companies as Motorola, DuPont, General Electric, LG Chem is one of the ideologists of the SixSigma management system, aimed at building enterprise management in terms of quality improvement. Six Sigma is a goal of achieving the highest possible excellence in meeting customer requirements.

The most modern powerful and high-performance extruders and mixers
For the production of PVC profiles, LG Chem has been purchasing the highest quality and high-performance extruder installations from the German company WEBER, a recognized leader in its field, for the last 20 years. On this moment In the production of profiles, LG Chem uses more than 200 extruder units with a total capacity of more than 300 thousand tons of profiles per year. For full implementation formulation capabilities LG Chem operates state-of-the-art metrology and mixing equipment, keeping abreast of the latest developments in the field

In-house machine-building production of extrusion tools
To carry out preventive and repair work on extruders, as well as for the production of high-precision dies used in PVC production profiles, under one roof with the production of PVC products there is a machine-building workshop for the production of tooling. Thanks to the successful development of LG Chem, the annual increase in sales of PVC profiles produced by it around the world, the staff of the company remains almost unchanged, and thanks, among other things, to these specialists, the quality of the profile is stable, constant and has the highest best ratings, both experts in this field and end consumers of finished windows.

Properties of LG Chem windows:

• Stylish modern design LG Chem windows
  The rounded shapes of the glazing bead and the external bevel of the frame and sash give LG Chem windows an unusually attractive appearance.
• High thermal insulation of LG Chem windows
  4-, 5-chamber structure, specially selected PVC composition, open reinforcement - all this gives high thermal insulation performance.
• High sound insulation of LG Chem windows
  The width of the double-glazed windows is up to 42 mm, excellent tightness (double-circuit seal along the entire perimeter) provide excellent absorption of street noise.
• High strength and reliability of LG Chem windows
  Impact strength is three times higher than GOST requirements. LG Chem windows can easily withstand significant wind loads and do not break or sag.
• Long-lasting whiteness and shine of LG Chem windows
  Thanks to the smooth, glossy profile treatment, dirt and dust do not penetrate into the surface, so LG Chem windows are easy to clean and do not turn yellow.
• Guaranteed quality of LG CHEM windows
  LG Chem shares responsibility for the quality of our products. There is a certificate from the manufacturer and seller of LG Chem windows.
• LG CHEM window profile is environmentally friendly
  The LG Chem profile meets the highest environmental standards. Thanks to its unique formulation, it is chemically inert, durable and resistant to environment. LG Chem windows are high quality, beautiful and safe for your health.
• Easy care for LG CHEM windows
  Due to their thoughtful design, LG Chem windows are easy and pleasant to care for. Thanks to the smooth flat surface they are easy to clean without the use of special detergents.

LG Hausys plastic windows can be installed either by point installation or belt method in horizontal and vertical planes. Since the existing system of various reinforcing profiles allows LG Hausys plastic windows to withstand the highest wind loads, they are successfully used in high-rise construction.

LG Hausys plastic windows are installed in buildings at a height of more than 100 meters. Our plastic windows of the L600 system with a construction depth of 60 mm have 4 chambers, which, in principle, for windows with this construction depth is a rather rare and pleasant advantage over 3-chamber plastic windows with a similar construction depth. The presence of a whole group of glazing beads various shapes and sizes allow you to install insulated glass with a thickness of 4 to 32 mm in LG Hausys plastic windows. Moreover, both single-chamber and multi-chamber insulated double-glazed windows can be installed in the windows. The design and shape of our plastic windows meets all the requirements of modern building codes in strength, rigidity, reliability and functionality.

The results of sanitary and epidemiological tests of our plastic windows confirm the right to install LG Hausys windows, both in residential and production premises. With the help of these products it is possible to glaze not only the apartments of private buyers, but also children's preschool and educational establishments, medical and therapeutic facilities, industrial and domestic facilities.

LG Hausys plastic windows are certified in Russia and can be successfully used not only in areas with normal operating conditions for similar products, but also in northern construction climatic zone at temperatures down to minus 55 degrees Celsius for at least forty years.

Main types window profiles LG:

LG 600 profile system(LG - 600)

LG-600 provides increased thermal insulation and complete absence of noise thanks to a 4-chamber profile created using LG Chem technologies in accordance with the highest European quality standards.

The L600 profile system is specially designed to meet consumer demand for high-quality plastic windows with excellent durability, heat saving and affordable prices. The system of plastic window profiles L600 provides increased thermal insulation and complete absence of noise thanks to a 4-chamber structure with a construction depth of 60 mm. The L 600 PVC profile system, created using LG Chem technologies, meets the highest European quality standards.

LG 600 profile system(LG - 700)

LG-700 is distinguished by elegant shapes with rounded edges. 5 chambers 70 mm deep reliably retain heat indoors and provide complete protection from noise and dust. L-700 profiles are the true quality of modern window technologies.

The L700 profile system with unique heat saving and sound insulation properties allows us to produce plastic windows for customers even with very high quality requirements. In terms of its heat-saving properties, L700 belongs to the elite profile systems and provides maximum thermal insulation and protection from external noise. Plastic windows from the L700 profile can be used in areas with the most severe climatic conditions. The design of the plastic five-chamber profile L700 with a construction depth of 70 mm, thought out to the smallest detail, will give a complete modern look any plastic window and with it the entire building.

All plastic windows must perform their functions, therefore window designs designed in accordance with all requirements. But quite often, as it turns out during installation, not all windows reliably perform their functions. The reason lies in the fact that the window sample may differ from the production batch. Also, these could be errors made during installation or errors in production. But are you looking for reliable windows, the quality of which you want to be 100% sure of? Then you should pay attention to LGHAUSYS windows.

LG plastic windows - high quality and manufacturing technology

PVC windows LG- great choice, if you wish quality windows for a low price. Window manufacturing technology, as well as high sealing characteristics, will make it possible to produce windows at top level. The quality of the windows will not depend on the manufacturer itself, nor on the installers who will install the windows. In addition, LG windows have some other advantages:
1. Environmentally friendly clean materials. All profiles have a hygiene certificate that confirms this. Moreover, a certificate is issued for all materials from which plastic windows are made.
2. LG windows have additional special seals. This allows you to protect the house from the most severe frosts, from wind and drafts. The windows are perfect for our region.
3. The high degree of window weldability ensures more long-term operation. The windows can last for decades.
4. High quality windows allows them not only to be used for a long time, but also preserves original appearance windows They will be the same color as when purchased and do not require additional care.

Would you like to order LG plastic windows?

Then we can help you! We are manufacturers of plastic windows, we have a certificate for the production of windows of this type trademark. We can provide all hygiene certificates, as well as the official manufacturer. For our products we have low price, since we are a manufacturer and work without intermediaries! If you have additional questions, call and ask, we will always help you!

Just a few years Russian market window systems from the LGHAUSYS company are presented, but they have already proven themselves to be ideal for the climatic conditions of Russia.
Our company presents LGHAUSYS windows, these are high-tech profiles with increased thermal insulation characteristics. PVC LG windows were developed by the world famous industrial giant from South Korea, but taking into account all the climatic features of Russia.

Highest grade double glazing

LG plastic windows are manufactured only using the highest grade glass M1 ( premium). This will ensure both high requirements for light transmission and aesthetics.

Reliable fittings

One of the main conditions for long, trouble-free window service is the use of high-quality fittings. LG windows are equipped with modern fittings from the German concern AUBI, which remains a leader in quality window fittings.
LG windows are presented in two systems – L-600 and L-700. The five-chamber window profile of the L-700 series has a thickness of 70 mm, and the four-chamber L-600 series has a thickness of 58-60 mm.
Main qualities of LGHAUSYS windows:
Thermal insulation – tightness is ensured by a double seal with triple ethylene-propylene rubber (EPDM).
Noise insulation is provided by double-glazed windows, the thickness of which is up to 40 mm.
Stylish design– LG Hausys profile is snow-white and elegant.
High strength - strength is much higher than the requirements according to GOST.
Quality and environmental friendliness.
You can order unique LGHAUSYS windows from our company in Tambov on the most attractive terms. Our specialists will deliver and install LG windows.