How to make an ottoman with your own hands - photo, master class. Do-it-yourself ottoman: step-by-step instructions on how to make original and comfortable furniture How to make an ottoman from a plastic round bucket

To update the design of your home, use additional pieces of furniture, which include homemade ottomans. Compared to factory ones, they have great advantages: due to their size, poufs are mobile, as well as multifunctional and lightweight interior elements. To make them, you can use various available materials found in your home and choose the type of upholstery, color, shape, size yourself. In the end, such a product will cost almost no investment.

You will learn how to make an ottoman with your own hands from this material, and beautiful photos and the video instructions at the end of the article will make your task easier.

A simple way to make soft poufs

We often don’t have enough time and desire to deal with patterns, so soft ottomans can be made like this:

  1. We cut out two circles from the fabric, which in diameter should be the same as the diameter of the bottom and top of the product. Be sure to leave seam allowances;
  2. Next, cut out two identical parts rectangular shape, the width of which is the height of the ottoman, the length is 1/2 the circumference of the lower and upper parts;
  3. We sew the rectangular parts together along the width from one edge until we get a long ribbon;
  4. We baste one circle to it, sew along the seam, and do the same manipulation with the other circle. If you receive an uneven seam, you can trim it using a decorative border.

Making a case for a product using this method is simple and quick. They stuff him with everything soft material, which is at hand. At the end of the process, a zipper is sewn into the unstitched edges of the rectangular tape.

"Chair" made of plastic bottles

Plastic bottles can be used creatively in everyday life and can even be used to form practical furniture elements, because plastic containers are cheap, convenient, lightweight, and, in fact, eternal material. By making an ottoman from bottles with your own hands, you will acquire an irreplaceable item that will fit perfectly into the interior of your cottage or home, will not take up much space and will last for several years.

For a compact and soft seat, first prepare the bottles - wash them, remove the stickers. To make the container stronger, we place it in open form in a cold room for an hour, then close it with a stopper and place it under a well-heated radiator. Bottles expand due to temperature differences and keep their shape for a long time.

For upholstery, it is better to use furniture fabric such as faux fur or tapestry. The fabric should have a dense base and wash well.

You will need:

  • Stationery knife;
  • 16 bottles of 1.5 l;
  • Threads, needles, sewing machine;
  • Two types of tape - transparent and double-sided;
  • Foam rubber (thickness – 3 cm);
  • Lightning;
  • Plywood (corrugated cardboard);
  • Furniture fabric for upholstery.

How to make an ottoman:

  1. We make the seat from its middle: we wrap it double-sided tape the central bottle, to which we will glue three or four more. Secure it well with transparent tape;
  2. We make a circle, level the base along a straight and hard surface. Secure each layer from bottom to top with tape;
  3. Let's cut out two round pieces of cardboard that are the same size as the pouf seat. Wrap the bottom and top with tape;
  4. Take a piece of foam rubber and completely wrap the future piece of furniture. We sew round shaped foam rubber to its edges on top;
  5. Now it’s time to take measurements, which we will transfer to the fabric. Next, cut out the parts of the product from the fabric and sew them in the round. We will sew a zipper into the side of the case and “dress” it with a pouf.

We get a light and reliable seat, also great for a children's room.

Another variation of a seat made from a large amount of foam rubber:

  1. This material is taken in a rectangular piece, the container is placed on it and wrapped. It turns out to be a soft bag “with a plastic filling” inside and a voluminous seat. The container lies much smoother than when wrapped with tape;
  2. This ottoman stands on bottle necks. For its stability and strength, we will take twice as many containers. We cut off the necks, stick a whole bottle into them, and in the end we get a cylinder, which we then decorate at our discretion.

Tire stool with backrest

From tires you can make comfortable and durable ottomans for the hallway or any other room:

  1. Let's prepare two round timbers from MDF or thick plywood, which should be slightly smaller in diameter than the wheel. They will serve to close holes;
  2. We take bolts with nuts or self-tapping screws and fasten the circles in three places.

The ottoman design can be designed in two variations:

  • Cover the top round piece of plywood with foam rubber and attach this material to the side of the tire furniture stapler. Let's make a cover that we will stretch on top. If you have small squares of bars, you can paint them and make legs from them;
  • Country style method. Take a thick braided rope and wrap it around the ottoman, not forgetting to secure it with glue. First we will cover both round timbers in a spiral, then the side parts of the wheel. Hide the ends of the rope and cover the top with varnish.

You can improve the resulting product and make an ottoman with a back. It will require carefully processed wooden blocks (five pieces).

  1. They are attached to the bottom of the chair, for which all the bars are connected to the side of the tire using four bolts.
  2. The backrest can be made with a slight tilt back. To achieve this, the upper bolts are installed with a spacer of washers.
  3. We make a back-sized pillow from two-layer foam rubber with a fabric cover. We sew ribbons on it (one third below the level of the top), they will also be tied to all the bars. Ribbons secure the cushion and at the same time serve to decorate the back of the pouf.

Pear ottoman option

Let's look at how to make an ottoman bag, which is a fashionable element of modern interiors.

You will need:

  • Pattern paper;
  • Fabric for the inner cover – 300x150 mm;
  • Threads of high density;
  • Strong and thick fabric for upholstery (suede, tapestry) – 320x150 mm;
  • Zipper – 60 cm;
  • Polystyrene foam filler with holofiber additive - 0.5-1 cubic meters. meter.

For the inner cover of the product, choose a slippery, smooth fabric. Thanks to it, the filler will easily roll over the bag and take the shape of the person resting in it.

The pouf pattern contains six bag wedges and one bottom piece for the base.

  1. First, drawings of the necessary parts must be made on paper. Next, they are transferred to the fabric that will be used on the outer and inner parts of the ottoman;
  2. When cutting, leave seam allowances of 1.5 cm;
  3. The upholstery bag should be made up of pieces that are slightly larger in size than the filler pieces, so the outer cover will be easier to fit onto the filler bag;
  4. We sew all the fabric parts of the bag. First, these will be wedges that are sewn together, then we proceed to the base;
  5. Leave room for the zipper on the outside;
  6. We pour filler into the inner bag, which will take up 2/3 of its volume, and stitch the remaining places;
  7. We put the cover on top and fasten the zipper.

A cute pear ottoman will add comfort and coziness to your home.

Product with box

To make an ottoman with a drawer, you need to follow the following instructions:

  1. From chipboard we cut out 2 blanks measuring 37x37 cm and 37x40 cm, and one square - 40x40 cm;
  2. We cut out 4 pieces 37 cm long from the timber (4x4 cm in cross-section);
  3. From these elements we make a box with a height of 37 cm;
  4. Using wood glue, we fasten the timber in the inner corners;
  5. We fix the corners from the outside with metal corners or self-tapping screws;
  6. Apply glue to the bottom and timber. Glue the bottom and let it dry. After this we secure it with self-tapping screws;
  7. We attach 4 locking bars to the square sheet for making the lid. This will secure the lid in the box;
  8. We upholster it with soft material (batting, foam rubber, padding polyester).

This piece of furniture can be perfectly used as an ottoman for shoes, which can be put away in a storage box from season to season.

Video: Detailed instructions on how to make an ottoman with your own hands

You can even make an ottoman for your home yourself using different materials and techniques: crocheted or knitted, sewn from improvised materials or even from an old sweater.

Our review presents interesting master classes how to make an ottoman for a hall or hallway and non-standard ideas use of the product in the interior. So, let's find out how to create a stylish piece of furniture step by step and what you need for this.

There are many fillers for making frameless furniture. Each material has its own characteristics and features.

If they don't fit synthetic materials, you should choose natural ones:

  1. Wood sawdust and shavings from waste cedar and pine. The raw material repels pests and has a healing effect, but it needs to be changed periodically.
  2. Pooh presents is a light filler.
  3. Buckwheat husk is popular. This filling allows you to create comfortable furniture.

To the benefits natural fillers It is worth mentioning the absence of harmful chemical components.

Synthetic materials are also used as fillers:

  1. Expanded polystyrene looks like small balls. Elastic granules allow you to create additional volume.
  2. Holofiber is a lightweight filler. It allows you to get upholstered furniture.
  3. Polyurethane foam is an elastic material that does not provoke allergies.

ADVICE: The filler can also be an old blanket, pillow or rag.

Products filled with balls can be used outdoors, because the material does not absorb moisture. For creation items furniture improvised means are also used. TO original materials This includes cereals, legumes, dry grass and cotton wool. Furniture filling options a large number of

Knitted square ottoman

Let's find out how to make a knitted ottoman with your own hands. Yarn furniture self made– an original solution for the interior and a soft object for a comfortable pastime. The stylish item looks like a sample from a store.

To make a soft ottoman with your own hands, you need to knit six squares of wool of the same size. Knitting is done by crochet. The “sampler” texture and bobble screeds are used. You can watch the knitting method in the video.

ADVICE: Such a pouf is suitable as an addition to an ottoman, as well as as an item for decorating bedrooms and living rooms.

  • Lyon brand yarn, 450 grams, gray– 5 skeins;
  • needles for creating tapestries;
  • crochet hook, size 6.5 mm;
  • pouffe filling;
  • special fibers and foam;
  • plastic bags.


Step-by-step instruction:

  1. Connect the squares using seams. To do this you will need a double thick thread.
  2. You can check the shape of the product on the box.
  3. Filling a piece of furniture. To strengthen the product, it is worth using materials such as plastic bags, foam or newspaper.

ADVICE: To prevent the filling from penetrating through the knitted pattern, it is recommended to place a pillowcase or soft lining inside.

Once filled, connect the two remaining sides. The yarn product is ready for use.

Master class from an old sweater

Let's figure out how to make an ottoman with your own hands from an old sweater. The lower part of the clothing can be used to decorate the upper surface of the product. Even when cutting off the sleeves, unsightly seams will not appear.

Assembly technology:

  1. Turn the sweater inside out and cut a circle at the collar.
  2. Sew up the arm holes with strong threads.
  3. Then turn the product inside out.
  4. The bottom should be slightly rounded.
  5. Place a special polyester lining inside the sweater. Then cut out two circles and connect these elements.
  6. The product must be filled with soft filler.


TOTAL: After stuffing the pouf, you should sew up the hole. The decorative product has many uses for the home. This perfect solution for home interior decoration.

Crochet an ottoman

You can knit a round pouf with your own hands. To knit a product with a diameter of 50 cm you will need 2-3 balls of Bobbin yarn. A detailed description is presented in the photo below.

But the knitting technology is as follows:

  • First a basket or bag is knitted
  • Filled with filler
  • And then the “lid” is knitted separately and sewn to the base of the ottoman








How to sew an ottoman bag with your own hands: photos and ideas

You can make an interesting product for your child. Ottoman bag with your own hands will do to create a cozy place for leisure.

A soft piece of furniture can be made from two pieces of fabric, bean pellet filling and a zipper. Like option Not suitable for small children, as filler granules may fall out of the unzipped zipper. There is a danger of the child choking. If necessary, the zipper can be sewn up.



IDEA the fact is that we sew like a bag - BUT we sew the OPPOSITE corners and get the design as in the photo

Master class: how to sew a fabric ottoman

Universal products can be made from fabric. This extra bed for sitting and a place to rest your feet. In this master class you will learn how to make a round ottoman with your own hands.

For manufacturing you will need the following components:

  • 1.25 meters of thick woolen fabric;
  • lightning;
  • scissors;
  • measuring tape;
  • sewing pins;
  • a piece of leather;
  • filler;
  • sewing machine.

The process of creating ottomans

  1. Cut out a circle (46 cm), a rectangle (length 142 cm, width 40) and a square (side 48 cm).
  2. Cut the square into two parts.
  3. Sew a zipper to both sides. The zipper should connect the two halves.
  4. Then cut out a circle from the square using a ready-made template.








  1. Fold the rectangle in half along the short side.
  2. After this, this part needs to be sewn to one circle, and then to another.
  3. From a strip of leather can you make a handle.
  4. Additionally, buttons are attached to the leather strap.

You can use polystyrene beans as a filler. Foam or polyester is also used. It is recommended to sew the zipper together before use. This DIY round ottoman is ready to use.

Ottoman-banquette in the hallway for shoes

To create an ottoman for the hallway with your own hands, you will need two drawers and some other materials. Such a product is not only practical, but also functional. You can install shelves inside and put shoes or things there.

You will need the following components:

  • two wooden boxes;
  • batting and foam for drapery;
  • fasteners;
  • sheet and burlap;
  • special paint;
  • wood plank;
  • wood glue;
  • tools;
  • brush;
  • stapler

To make an ottoman in the hallway with your own hands, you need to follow these steps:

  1. The boxes are glued along the long side.
  2. A bar is attached to the bottom where the rollers can be attached.
  3. Then foam and batting are fixed to the top surface.
  4. The burlap is sewn together with the sheet. The sheet acts as a lining.
  5. The box is coated with special paint. If desired, you can apply an aging effect.
  6. The cover fits over the drawers.

You can make other ottomans from boxes with your own hands, the photo demonstrates original options. One option involves opening the drawers, inside which you can place shelves for shoes. And it is attached on top soft pillow with filler.

  • A practical option can be made from one box. First, the box needs to be sanded and painted with spray paint. Filler is laid on the plywood, and fabric is laid on top.
  • The material is fixed on the reverse side with a stapler. Z
  • The plywood is then attached to the surface of the box. You can attach rollers at the bottom.

How to make an ottoman from a stool

When deciding which ottoman you can make with your own hands from available materials, it’s worth trying. For creative manipulations you will need an old stool.

Let's start assembling:

  1. Disassemble the chair and remove the seat.
  2. Cut out the blanks. Circle in plywood and foam.
  3. Use glue to attach the foam to the board.
  4. Put a fur cover on top and secure the ends with a stapler.
  5. Assemble the chair.

It is necessary to let the chair stand for at least a day for the glue to harden. The fur needs to be combed.

Detailed in this article.

Ideas for ottomans using improvised materials

Let's consider options for ottomans with original design. Common objects, bottles, tires and rags serve as filler and frame.

Bottles

Unusual creation option DIY ottoman made from plastic bottles. The bottles need to be held together in a round shape and secured with tape. The bottom and top of the product are made from cardboard.

The bases are made from foam. They are fixed with tape. The cover is made of beautiful fabric. You can see the design made from bottles at photo. A similar item is suitable for decorating a living room.

Tires

Interesting models can be made from tires. How to make an ottoman depends on the availability of available materials and skill. The tires need to be fastened together. A material similar to foam rubber is placed inside. The holes are then covered with thin boards. A soft base is mounted on top and a cover is put on. To decorate the structure you need to use dense fabrics.

Ottomans for children

To make an ottoman with your own hands, you can use drawings and diagrams. Bright and colorful fabrics are used to make products. Try these options:

  1. The model, made of two pieces of material, looks interesting. different color. Plain fabric can be used at the bottom.
  2. A wonderful solution is square-shaped structures.
  3. An original composition can be achieved by using fabrics of different colors.
  4. Children will love the cone-shaped ottoman.
  5. You can even sleep on a long ottoman. To make it you will need flat pillows and a long blanket. The pillows are placed in a fabric cover and secured in place.


Ottoman in the interior with different designs

The choice of ottoman option largely depends on the type of room. For the hallway, you should choose frame models with a rigid base. Cylindrical designs help smooth out the angularity of the room. For comfortable rest In the living room, models with soft upholstery are suitable. To create an accent, you should choose a product made from a material with a bright color palette.

Round poufs – perfect option For small space. Rectangular ones are recommended to be placed near armchairs and sofas. The product for the kitchen must be made of moisture-resistant fabrics. For a child's room, you need to choose safe, comfortable and soft models.

We hope that our master classes will help you figure out in detail how to make an ottoman from simple materials. Homemade products will add comfort and coziness to any room. Original seats are suitable for different interiors.

A pouf is a small and very functional piece of furniture. Its popularity has not diminished at all over time. recent years. Now this useful item interior design is as popular as ever. Making it can be the first step towards starting self-made upholstered furniture. This will allow you to first try your hand and work out the technology.

In that small review will describe how to make an ottoman with your own hands. The assembled product will be a wonderful addition to the interior of the living room or hallway.

Choice of design and construction

This item is the easiest to produce, so even the most novice craftsman can handle its production. Before starting work, you first need to decide on the design of the future product. Studying photos of various ottomans will help with this.

The ottoman can have a rigid frame or do without one at all. Various materials can be used as a frame. The most commonly used classic carpentry materials are boards, plywood, and chipboard.

Ottomans with a frame can also be made from old plastic bottles, buckets or car tires. Poufs without a frame are a neatly sewn bag filled with polystyrene foam.


Ottoman frame

Assembling this item is not difficult. Let's figure out what and with what materials you can make a pouf with your own hands. Depending on the design used different instruments and materials.

Frameless pouf

The simplest soft ottoman without a rigid frame is made using a minimal set of tools. To do this, you need to sew a bag with a lining and fill it with granulated polystyrene foam, specially produced in the form of balls for stuffing furniture. Therefore, it is easy to purchase in hardware store or on the market.

Tire pouf

A new and quite popular model now are ottomans from the old car tire. Making them is also very simple. This will require old tire preferably mounted on a metal disk for rigidity.

If the tire does not have a disk, then the structure can be given rigidity wooden partitions installed inside the tire.

In order to make such an ottoman, you need to cut two circles from plywood 3-5 millimeters thick and attach them with screws to the tire at the top and bottom to create horizontal planes. Then, using quick-drying glue, glue the rope to the surface from the center to the edges in a spiral.

The top is covered with rope wooden surface And side surface made of rubber. Before purchasing material, you need to calculate the length of the rope and estimate its cost.

Perhaps such a piece of furniture will not fit into the living room or bedroom, but it may be suitable for a home workshop or office. In this case, you can try not to decorate its surface with rope, but only stick it on the upper surface soft seat, leaving the rubber untouched.


Pouf made from plastic bottles

You can make such furniture from the most different materials. For example, you can even use it as a frame plastic bottles, old buckets, but it is better to use more durable materials. They are not so expensive in price and their consumption is very small.

With their help, you can create an ottoman of any size and shape and add additional structural elements: assemble an ottoman with a hinged lid, drawer for various small things, with legs or rollers.

Pouf made of plywood, chipboard

Poufs with a frame made of chipboard, wood or plywood are quite simple to make. Such products can be heavily loaded and can be used as an ordinary stool

To create it, it is first cut in accordance with the drawing. sheet material. It is fastened with screws and fixed along the edges of the sheets wooden blocks. Small irregularities will be hidden by soft upholstery and finishing fabric.


The pouf may have a liftable lid attached to hinges. It will be possible to store small things in it, but for this you need to make a bottom. The lid, depending on the base, may have different shape: round, square.

Lining

The next step is to attach the soft lining. For these purposes, padding polyester or foam rubber is used, which is attached using construction staples and glue. Decorative coating made of fabric or leather is attached in a similar way on top soft upholstery.

The color and type of coating determines the design of the product as much as its frame. The finish of a product determines its overall design, so it determines how well the product will fit into the interior. Since the product turns out to be quite small, it is quite possible to use the most daring color solutions, which will almost always be appropriate.

For convenience, the pouf can have legs or casters. They are installed at the last stage. If you decide to make it without rollers, then in order to avoid scratching the floor, you should glue four small pieces of felt from regular insoles to the bottom.

When making any furniture, the main thing is to patiently complete all the work, carefully following each step. You can make an ottoman with your own hands from almost anything; you can use a wide variety of materials and ideas.

The most important thing is that for this you will be rewarded with a new piece of furniture that will serve you for many years, delighting you with a pleasant appearance.

Photos of do-it-yourself ottomans

How to make an ottoman with your own hands without throwing money away? Of course, you can buy it in a furniture store, but looking at the cost of a simple chipboard product, you will want to do crafts at home. If we consider furniture sets as a whole, then most of them belong to rather complex structures.

You can do something from this list with your own hands experienced craftsmen, and only the ottoman is made without special skills and knowledge from improvised means. A practical item will be obtained when you choose a durable and high-quality upholstery fabric that can be wiped, cleaned, and washed.

Such materials include leather or furniture fabric sold in specialized stores. All that remains is to view step by step instructions for the manufacture of ottomans of various shapes.

So:

  • An ottoman for seating several people is comparable in height to an armchair and more like a soft bench. For the home, such a model is inconvenient and unnecessary, but in fitting and waiting areas it is very relevant.
  • An ottoman in addition to something with a certain height. From the definition itself it becomes clear that it is not an independent product, but serves as an application. Models that barely rise above the floor are not intended for sitting on, but are used as footrests for adults. Children love these things in miniature and enjoy using them in their games.
  • Complementing armchairs, sofas, beds, sliding under the table or as a component in a non-standard combination (beach cabin with pouf), ottomans firmly occupy a niche in furniture showrooms. One can say more, there is a fashion for designer items that make the interior fashionable, complementing it.
  • The video in this article introduces poufs with advanced features. Looking through it, you remember the plot of the film, when “with a slight movement of the hand, trousers turn into shorts,” and here the ottoman transforms into a full-fledged chair with a table, a bed with a lamp stand, and others necessary items, while occupying a minimum of space.

Before you start making an ottoman with your own hands, you need to have an idea about this seemingly simple furniture family.

So, poufs are classified according to materials, design, functions and shapes:

  1. Soft products use textiles, leather. It’s nice to throw your legs on a hand-knitted ottoman, and when the size allows, you can lounge on it.
  2. Rigid ottoman designs are made from rattan, wood, often varnished, bark cork trees . Hard ottomans, made with your own hands, are not suitable for long-term sitting, but they bring liveliness and intrigue to the interior.

Attention: An ottoman is definitely a necessary thing, and its need is felt when entering the house, or rather, the hallway.

  1. How to make, sew, knit and what design of an ottoman to choose is not an easy task. Ottomans can have exposed frames made of steel tubing or wood.
  2. The ottoman may have a closed frame, and the legs are hidden under the frills of a decorative skirt. Such products are popular among the British and Americans.
  3. Ottoman with barely visible legs when a chair is copied without armrests and backrest.
  4. DIY ottoman with back- Not only comfortable armchair for members of the whole family, regardless of body weight, but also an excellent support for a sore back.
  5. What could be simpler than an inflatable ottoman?, consisting of a textile cover with a zipper and an inflatable chamber inside it? Ottomans differ not only in materials and designs, but also in shape.
  6. DIY square ottoman, round, triangular, combined from different geometric shapes, can be made from available materials.

Tools at home

How to make an ottoman yourself if you don’t have the skills or desire to saw, cut, or twist? Craftsmen offer a lot of ideas and proposals that are brought to life. The work of making a cute ottoman is not difficult, but quite exciting, and a thing made with your own hands radiates a special warmth and has an aura of home comfort.

Soft ottomans

The most simple circuit How to make a soft ottoman with your own hands is as follows:

  • Two circles are cut out of fabric with a diameter equal to the diameter of the upper and lower parts of the product.

Tip: When cutting out parts, remember to leave seam allowances.

  • Two rectangular parts of the same size are cut out:
  1. width of the height of the pouf;
  2. length equal to half the circumference of the top and bottom of the pouf.
  • Rectangular parts are sewn together on one side along the width to obtain a long ribbon.
  • One of the circles is basted to it and sewed along the seam.
  • The same is done with the second circle.

Tip: If the seam is not too even or neat, it is trimmed with a decorative border.

  • The resulting pouf cover is stuffed with any suitable material.
  • A zipper is sewn into the unstitched edges remaining in the rectangular tape.

The photo shows a diagram of how to make a pouf in the simplest way.

In a similar way, you can make an ottoman in the shape of a cube. The difference is in making the pieces, which must be square in shape, and to make the sides you will need to make four pieces of fabric rather than two.

Then:

  • The details fit together.
  • To more clearly indicate the edges of the cube, you can use a canvas of a different contrasting color.
  • A denser fabric will provide additional strength and elasticity.
  • Such a pouf can be filled with padding polyester and foam rubber. These materials hold their shape perfectly and do not deform.
  • The hole for stuffing the material is made at the bottom of the pouf so that it is not visible.
  • If desired, it can be stitched tightly after stuffing the pouf, or a zipper can be sewn in so that the material can be replaced if necessary.

Sewing an ottoman

  • The video in this article demonstrates the procedure for sewing an 8-piece ottoman. To do this, a sheet of paper is folded in four, a template is drawn on it and cut out according to the diagram below.
  • The unfolded template is fixed on the fabric and the cutting of 8 pieces begins.

Please note: It is not necessary to purchase a pattern new fabric, you can use old deposits of knitted clothes, old sweaters.

  • The photo below shows that the sharp end of each hexagon is bent inward by approximately 5-6 cm and stitched on a machine, which makes it possible to obtain an octagonal hole for stuffing the finished product after assembling all the elements.
  • The blanks are attached to each other in pairs with a distance of approximately 1 cm from the edge. The pairs are folded front side In order for the seams to turn out from the wrong side, the stitched form has 4 segments from 2 blanks.
  • In the same way, they are sewn together in 2 sections and you get 2 halves of the future ottoman.
  • The halves are connected to each other by machine, the cover is turned right side out.
  • The ottoman is stuffed with prepared filling (holofiber, foam rubber, padding polyester), and the hole is closed with a lid of the appropriate size. The edges of the lid should already be finished, and it is manually, carefully sewn on top of the stuffing hole.
  • The instructions for beginners recommend sewing an ottoman with literally three seams. Why cut out 2 circles, the diameter of which is about 50 cm, or 2 squares, if you prefer clear lines. Geometric shapes will serve as the top or bottom of the future product.
  • A strip of the same material or another is cut out in a size corresponding to the length of the circle or the perimeter of the square; the width of the strip depends on the height of the ottoman. The height of the ottoman, in turn, is selected depending on the function that the product will perform, whether it is a footrest, a seat in the hallway, a toy for young children, or a structure in the living room.

Attention: The cutting of the strip for the side of the ottoman is done taking into account seam allowances.

  • The work is done in such a way that the seams are on the wrong side, the strip is sewn first of all to the bottom of the product and only then to the top.
  • After stitching all the seams, the ottoman is turned right side out and stuffed.
  • Using the same patterns presented above, covers for the ottoman with a zipper are cut out for the first option and for the second. This will allow you to wash or clean the cover in the future without unnecessary problems and time-consuming, and without having to solve the problem of how to cover the ottoman with fabric if it is already made of fabric.

Reliable base for plastic bottles

  • Plastic bottles are available in unlimited quantities in every home. Take, for example, beer and water bottles with a capacity of 1.5 - 2 liters; their color in the finished product does not matter, and they will help unload debris in the yard and house.
  1. To make a good, stable ottoman you will need at least 16 1.5 liter bottles or 9 2 liter bottles.
  2. Cardboard packaging from household appliances also waits its turn and is not thrown away for years, but what if the refrigerator breaks down, how do you take it for repairs? The video in this article will show how cardboard is used to make an ottoman from plastic bottles.
  1. You need to stock up on tape, foam rubber and upholstery material.
  1. Hot glue gun, zipper for case.

Attention: From round bottles you can make an even larger circle, square or rectangle, that is, the shape of the product is chosen according to your preferences.

  • For ease of use, if a very large ottoman is planned, the bottles are connected into separate sectors and sections with tape, and then the formation of the overall structure begins.
  1. If the future product is planned to be round in shape, then the ottoman should be made starting from the middle.
  2. To do this, take a bottle and, using radial movements, attach new elements to it, which are carefully fixed to each other with tape.
  3. After completing the circle, cut out the base from thick cardboard. It should be slightly larger in size than the bottle structure.
  1. The cardboard is also secured with several layers of adhesive tape. There is no need to dwell once again on the point that 2 bases must be prepared, and everything is clear.
  2. Now it’s the turn of the soft upholstery, for which two parts for the top and bottom are cut out of dense foam rubber, which are glued in place.
  3. From the remaining part of the foam rubber, according to the dimensions of the circumference line of the side part, a rectangle is cut out, which is wrapped around the pouf.
  4. All that remains is the final stage of sewing a cover made of furniture fabric, preferably with a zipper. This operation will not only allow you to easily remove the cover for washing, but also make several options and update it from time to time. appearance of your product.

Ottoman from grandma's rarity

How to make an ottoman out of a stool so that grandma’s rarity can serve for many more years?

Indeed, a well-knit stool made of durable wood, painted oil paint, may please the owners for many years, but the appearance does not match modern environment. Remodeling will help bring balance to the interior old stool in a stylish ottoman.

  • The stool structure is pre-strengthened with self-tapping screws.
  • The legs are shortened a little - do not forget to check the level so that the ottoman does not wobble later.
  • The frame of the future ottoman is assembled using 4 sheets of plywood. They are attached with self-tapping screws to the legs of the stool.
  • The fifth sheet of plywood is screwed from below and serves as the bottom of the future craft.
  • The foam for the seat is cut out with an allowance of 5 cm.

Attention: Top part The ottoman is coated with glue, then the foam rubber will not form an untidy lump over time.

  • The upholstery fabric on the seat is attached together with the foam rubber using staplers.
  • Foam rubber can be attached to the sides with slats, which help to give round shape ottoman and make it more beautiful.
  • The rest of the structure is covered with fabric and secured with staples.
  • The wheels are screwed on or, as in the photo above, the cute little legs of the updated stool peek out from under the flirty upholstery.
  • The problem of how to make an ottoman from a stool was solved in a short time.

For those who like to knock

The rich Russian language raises many associations and questions. How to knock, where to knock, when to knock? For those who like to hit a nail with a hammer, we suggest making an ottoman with your own hands from boards and chipboard.

  • Rectangular pieces of 40x30 cm from chipboard are pre-prepared in the amount of 4 pieces.
  • A circle with a diameter of 30 cm and 4 wooden blocks.
  • Wood glue.
  • Furniture wheels with special fasteners.
  • Metal corners, screws.
  • Foam rubber and upholstery fabric.

How can you see the set? necessary materials not much different from each other when we make an ottoman with our own hands, even in different ways:

  1. A box is assembled from rectangles. They're on the move metal corners, self-tapping screws, all corners of the structure are aligned, they must be straight.
  2. The bars on which the wheels will later be located are fixed with glue on the lower part.
  3. A base is attached to the top in an individually selected shape.
  4. The finished frame is upholstered using the same technology using foam rubber, fabric and a zipper on the cover.

For lovers of knitting and stuffing

How to make an ottoman with your own hands that is frameless and therefore soft. Needlewomen who know how to crochet will be able to knit a soft ottoman much faster, but not everyone may like their appearance.

Lovers of working with knitting needles present interesting models of ottomans knitted with them:

  • To work, you will need the thickest knitting needles that are available in stores.
  • For knitting needles with a diameter of 9 mm, fairly thick wool is suitable.
  • Ordinary threads offered in stores are too thin. The price for them is not high, but due to the fact that you will have to make thicker ones out of them, weaving them together, you will have to purchase a fairly large quantity, which will add to the cost of the product.
  • You can, of course, cut, unravel, twist unnecessary knitwear, which takes a lot of time, and even find it at home required quantity plain knitted clothing that has become unusable is quite problematic.
  • It seems that the solution to the problem of how to make an ottoman with your own hands has reached a dead end, but cotton clotheslines caught my eye.

Attention: Synthetic clotheslines are not suitable for this job, and cotton ropes are difficult to buy in small towns.

  • For a soft ottoman of sufficient size, you will need 20-30 of these ropes, which are tied into a long rectangle.
  • The side is tied together with rope to create a spacious, wide skirt.
  • The bottom is tied with a rope of the same color and you get a bag that needs to be stuffed with something. There are 2 options here - use old items neatly stacked on shelves in the closet or go to the store and buy foam rubber or holofiber.
  • Unnecessary old items make the ottoman heavy and not as round and fluffy as those made from store-bought materials, but it frees up space in the closet for new clothes.
  • The top of the ottoman is decorated with the same rope and you can try out your product.

Ottoman from an old bucket

Here's another one interesting solution, for which we will need: an old plastic bucket, a thick jute rope, a hot glue gun, a stapler, scissors, a cabinet handle, Velcro tape, upholstery fabric and a few new microfiber cloths. You will also need cardboard, but it will be better if you replace it with thin plywood.

  • First, wash the bucket and remove the metal handle.
  • Next, use hot glue to glue outer surface buckets with a rope, starting from the bottom.
  • Cut the end of the rope and hide it carefully.
  • Place the bottom of the bucket on the cardboard and trace it. Lay out the upholstery fabric according to the intended template and cut the round blank with a 5-centimeter outlet.
  • We make a hole in the center of the cardboard and fabric. We pass a bolt from a furniture handle through them and screw on the knob.
  • Next, we roll the fiber into tubes and radially wrap the bolt between the cardboard and paper, creating a kind of roll. To prevent the fiber from unwinding, we securely fix it with glue.
  • Then the fabric is stretched and secured on the reverse side with a stapler.
  • To hide cardboard marks, close reverse side seats with another piece of fabric that needs to be placed on glue.
  • Cut the Velcro into four equal pieces and stick them crosswise onto the bottom of the bucket and the base of the saddle - with the bristles towards the bucket and the fluffy part towards the seat. Connect the two parts. Hooray! The ottoman is ready!

The result is something like this useful craft, on which you can sit comfortably.

Various options provide the opportunity to solve the problem of how to make an ottoman yourself from scrap materials that are available in abundance in any home. The only thing I still wanted to focus on was the floor in the room.

Laminate is quite sensitive to mechanical stress, so it is better to make an ottoman without wheels and legs, that is, with a solid bottom. On soft surfaces, carpet, ottomans on casters are appropriate, but for tiled flooring there are no restrictions, unless forged legs can be an exception.

Chipboard ottoman

In one toast, the hero of “Prisoner of the Caucasus” expressed the very essence of existence, so that “our desires coincide with our capabilities.” Eat free time and the desire to make an ottoman with your own hands from chipboard, you need to prepare the possibilities.

  • You can’t make a good ottoman without a good foundation chipboard sheet. Optimal size the design is within the range of 400x400x500 mm.
  • You can make a wooden ottoman using a simplified technology, making a frame in the form of a mailbox from a timber and screwing it on with the side cuts, but since the ottoman is being made for yourself, you can try.

Work with pleasure

You should not start work in a bad mood: something will fall on your foot or you will hit the wrong nail with a hammer.

  • 5 squares of 400x400 mm are marked and cut from a sheet of chipboard to make the walls of the structure and the bottom.

Attention: The bottom of the ottoman should not be made of plywood; small children like to hide in secluded corners, can break through thin plywood and cause injury.

  • The cover can be any geometric shape: square, round, oval. Beginners can skip experimenting and stick with a square lid. It will have dimensions slightly larger than the main box 430x430 mm, in order to protect it from falling inside.
  • The height of the finished product is made up of its constituent elements - the height of the structure is 400 mm, plus the rollers are 50 mm, the bottom and tire are 32 mm thick, the upholstery is 50 mm thick, for a total of 532 mm.
  • From the prepared elements, the formation of the structure begins.
  • The sides of the ottoman are fastened with metal corners. The beams used to glue all the internal corners will help increase rigidity and reliability.
  • From the front side of the ottoman, the cutouts themselves are screwed into the beams, the heads of which should be recessed into the wood so that later there are no problems with torn upholstery.
  • The lower part of the box is coated with wood glue along the perimeter, capturing the ends of the beams.
  • The bottom of the ottoman is attached, and the cuts themselves are again screwed into the ends of the beams. The assembled structure must dry well.
  • The base of the ottoman has been made, but there are still no wheels and a lid on which you can sit in the future.
  • The lid is secured with 4 bars screwed from the inside. The work is carried out after you are sure that the lid closes smoothly and the side reinforcement bars do not interfere with the closing of the lid.
  • The finished structure is turned over, and the wheels are attached using the cuts themselves.

Attention: They are fixed through the bottom to the ends of the beams, for which small holes are drilled in the bottom.

Before continuing work, you need to make sure that the resulting structure is sufficiently stable, holds the person sitting on it well and there are no shortcomings that would interfere with further work, otherwise there is no point in starting the upholstery.

The ottoman gets dressed

A do-it-yourself ottoman made of wood, chipboard, or generally soft needs clothing on top. This function is performed with honor by high-quality upholstery fabric, neatly attached to the frame of the structure.

  • First, the cover of the ottoman is made, for which a soft lining is cut out from foam rubber, padding polyester, and batting. The size of the pad should correspond to the parameters of the seat so that it is neatly glued into place without drooping.
  • From the fabric intended for upholstery, a blank is cut out several times large sizes than the lid. This is done so that the edges can be folded under the lid and secured from the inside with a stapler or furniture nails.
  • The instructions instruct you to further design the sides of the ottoman.
  • The part is cut out from upholstery fabric 400 mm x 4 = 1600 mm with a margin for connection. Also in height, the material must have an allowance at the top and bottom.

Attention: The fabric must be straightened, stretched, tucked inward, and the edges must be secured with furniture nails or a stapler.

  • The seat is decorated, the niche is upholstered, all edges are neatly closed and you can present ready product for control by discerning family members.
  • A do-it-yourself plywood ottoman is made according to the same pattern if you choose this simple design option.
  • The work becomes a little more complicated when an opening drawer is provided on the ottoman, then the stop bars are replaced with door hinges.

Getting acquainted with the design of this simple piece of furniture, one detail catches your eye: despite the difference in shapes of ottomans and their types, the base is a rigid frame, there is a seat and legs. They are decorated in different ways, but quilted leather or leatherette gives the products an elite, luxurious look and you cannot immediately determine that the price of the product is within reasonable limits.

Although, it should be noted that a neat ottoman, covered with a different material, can bring comfort and convenience to the room and looks no less elegant than a leather one.

How to make an ottoman with your own hands without throwing money away? Of course, you can buy it in a furniture store, but looking at the cost of a simple chipboard product, you will want to do crafts at home. If we consider furniture sets as a whole, then most of them belong to rather complex structures.

Experienced craftsmen can make something from this list with their own hands, and only the ottoman is made without special skills and knowledge from improvised means. A practical item will be obtained when you choose a durable and high-quality upholstery fabric that can be wiped, cleaned, and washed.

Such materials include leather or furniture fabric sold in specialized stores. All that remains is to look at the step-by-step instructions for making ottomans of various shapes.

So:

  • An ottoman for seating several people is comparable in height to an armchair and more like a soft bench. For the home, such a model is inconvenient and unnecessary, but in fitting and waiting areas it is very relevant.
  • An ottoman in addition to something with a certain height. From the definition itself it becomes clear that it is not an independent product, but serves as an application. Models that barely rise above the floor are not intended for sitting on, but are used as footrests for adults. Children love these things in miniature and enjoy using them in their games.
  • Complementing armchairs, sofas, beds, sliding under the table or as a component in a non-standard combination (beach cabin with pouf), ottomans firmly occupy a niche in furniture showrooms. One can say more, there is a fashion for designer items that make the interior fashionable, complementing it.
  • The video in this article introduces poufs with advanced features. Looking through it, you remember the plot of the film, when “with a slight movement of the hand, trousers turn into shorts,” and here the ottoman transforms into a full-fledged chair with a table, a bed with a lamp stand and other necessary items, while taking up a minimum of space.

Before you start making an ottoman with your own hands, you need to have an idea about this seemingly simple furniture family.

So, poufs are classified according to materials, design, functions and shapes:

  1. Soft products use textiles, leather. It’s nice to throw your legs on a hand-knitted ottoman, and when the size allows, you can lounge on it.
  2. Rigid ottoman designs are made from rattan, wood, often varnished, and cork tree bark.. Hard ottomans, made with your own hands, are not suitable for long-term sitting, but they bring liveliness and intrigue to the interior.

Attention: An ottoman is definitely a necessary thing, and its need is felt when entering the house, or rather, the hallway.

  1. How to make, sew, knit and what design of an ottoman to choose is not an easy task. Ottomans can have exposed frames made of steel tubing or wood.
  2. The ottoman may have a closed frame, and the legs are hidden under the frills of a decorative skirt. Such products are popular among the British and Americans.
  3. Ottoman with barely visible legs when a chair is copied without armrests and backrest.
  4. DIY ottoman with back- not only a comfortable chair for members of the whole family, regardless of body weight, but also excellent support for a sore back.
  5. What could be simpler than an inflatable ottoman?, consisting of a textile cover with a zipper and an inflatable chamber inside it? Ottomans differ not only in materials and designs, but also in shape.
  6. DIY square ottoman, round, triangular, combined from different geometric shapes, can be made from available materials.

Tools at home

How to make an ottoman yourself if you don’t have the skills or desire to saw, cut, or twist? Craftsmen offer a lot of ideas and proposals that are brought to life. The work of making a cute ottoman is not difficult, but quite exciting, and a thing made with your own hands radiates a special warmth and has an aura of home comfort.

Soft ottomans

The simplest diagram of how to make a soft ottoman with your own hands is as follows:

  • Two circles are cut out of fabric with a diameter equal to the diameter of the upper and lower parts of the product.

Tip: When cutting out parts, remember to leave seam allowances.

  • Two rectangular parts of the same size are cut out:
  1. width of the height of the pouf;
  2. length equal to half the circumference of the top and bottom of the pouf.
  • Rectangular parts are sewn together on one side along the width to obtain a long ribbon.
  • One of the circles is basted to it and sewed along the seam.
  • The same is done with the second circle.

Tip: If the seam is not too even or neat, it is trimmed with a decorative border.

  • The resulting pouf cover is stuffed with any suitable material.
  • A zipper is sewn into the unstitched edges remaining in the rectangular tape.

The photo shows a diagram of how to make a pouf in the simplest way.

In a similar way, you can make an ottoman in the shape of a cube. The difference is in making the pieces, which must be square in shape, and to make the sides you will need to make four pieces of fabric rather than two.

Then:

  • The details fit together.
  • To more clearly indicate the edges of the cube, you can use a canvas of a different contrasting color.
  • A denser fabric will provide additional strength and elasticity.
  • Such a pouf can be filled with padding polyester and foam rubber. These materials hold their shape perfectly and do not deform.
  • The hole for stuffing the material is made at the bottom of the pouf so that it is not visible.
  • If desired, it can be stitched tightly after stuffing the pouf, or a zipper can be sewn in so that the material can be replaced if necessary.

Sewing an ottoman

  • The video in this article demonstrates the procedure for sewing an 8-piece ottoman. To do this, a sheet of paper is folded in four, a template is drawn on it and cut out according to the diagram below.
  • The unfolded template is fixed on the fabric and the cutting of 8 pieces begins.

Attention: It is not necessary to purchase new fabric for the pattern; you can use old deposits of knitted clothes and old sweaters.

  • The photo below shows that the sharp end of each hexagon is bent inward by approximately 5-6 cm and stitched on a machine, which makes it possible to obtain an octagonal hole for stuffing the finished product after assembling all the elements.
  • The blanks are attached to each other in pairs with a distance from the edge of approximately 1 cm. The pairs are folded with the front side so that the seams are on the wrong side; when sewn, there are 4 segments of 2 blanks.
  • In the same way, they are sewn together in 2 sections and you get 2 halves of the future ottoman.
  • The halves are connected to each other by machine, the cover is turned right side out.
  • The ottoman is stuffed with prepared filling (holofiber, foam rubber, padding polyester), and the hole is closed with a lid of the appropriate size. The edges of the lid should already be finished, and it is manually, carefully sewn on top of the stuffing hole.
  • The instructions for beginners recommend sewing an ottoman with literally three seams. Why cut out 2 circles, the diameter of which is about 50 cm, or 2 squares, if you prefer clear lines. Geometric shapes will serve as the top or bottom of the future product.
  • A strip of the same material or another is cut out in a size corresponding to the length of the circle or the perimeter of the square; the width of the strip depends on the height of the ottoman. The height of the ottoman, in turn, is selected depending on the function that the product will perform, whether it is a footrest, a seat in the hallway, a toy for young children, or a structure in the living room.

Attention: The cutting of the strip for the side of the ottoman is done taking into account seam allowances.

  • The work is done in such a way that the seams are on the wrong side, the strip is sewn first of all to the bottom of the product and only then to the top.
  • After stitching all the seams, the ottoman is turned right side out and stuffed.
  • Using the same patterns presented above, covers for the ottoman with a zipper are cut out for the first option and for the second. This will allow you to wash or clean the cover in the future without unnecessary problems and time-consuming, and without having to solve the problem of how to cover the ottoman with fabric if it is already made of fabric.

Reliable base for plastic bottles

  • Plastic bottles are available in unlimited quantities in every home. Take, for example, beer and water bottles with a capacity of 1.5 - 2 liters; their color in the finished product does not matter, and they will help unload debris in the yard and house.
  1. To make a good, stable ottoman you will need at least 16 1.5 liter bottles or 9 2 liter bottles.
  2. Cardboard packaging containers from household appliances also wait their turn and are not thrown away for years, but what if the refrigerator breaks down, how to take it for repairs? The video in this article will show how cardboard is used to make an ottoman from plastic bottles.
  1. You need to stock up on tape, foam rubber and upholstery material.
  1. Hot glue gun, zipper for case.

Attention: From round bottles you can make an even larger circle, square or rectangle, that is, the shape of the product is chosen according to your preferences.

  • For ease of use, if a very large ottoman is planned, the bottles are connected into separate sectors and sections with tape, and then the formation of the overall structure begins.
  1. If the future product is planned to be round in shape, then the ottoman should be made starting from the middle.
  2. To do this, take a bottle and, using radial movements, attach new elements to it, which are carefully fixed to each other with tape.
  3. After completing the circle, cut out the base from thick cardboard. It should be slightly larger in size than the bottle structure.
  1. The cardboard is also secured with several layers of adhesive tape. There is no need to dwell once again on the point that 2 bases must be prepared, and everything is clear.
  2. Now it’s the turn of the soft upholstery, for which two parts for the top and bottom are cut out of dense foam rubber, which are glued in place.
  3. From the remaining part of the foam rubber, according to the dimensions of the circumference line of the side part, a rectangle is cut out, which is wrapped around the pouf.
  4. All that remains is the final stage of sewing a cover made of furniture fabric, preferably with a zipper. This operation will allow you not only to easily remove the cover for washing, but also to make several options and update the appearance of your product from time to time.

Ottoman from grandma's rarity

How to make an ottoman out of a stool so that grandma’s rarity can serve for many more years?

Indeed, a well-built stool made of durable wood, painted with oil paint, can delight its owners for many years, but the appearance does not correspond to the modern environment. Remaking an old stool into a stylish ottoman will help bring balance to the interior.

  • The stool structure is pre-strengthened with self-tapping screws.
  • The legs are shortened a little - do not forget to check the level so that the ottoman does not wobble later.
  • The frame of the future ottoman is assembled using 4 sheets of plywood. They are attached with self-tapping screws to the legs of the stool.
  • The fifth sheet of plywood is screwed from below and serves as the bottom of the future craft.
  • The foam for the seat is cut out with an allowance of 5 cm.

Attention: The upper part of the ottoman is coated with glue, then the foam rubber will not bunch up into an untidy lump over time.

  • The upholstery fabric on the seat is attached together with the foam rubber using staplers.
  • Foam rubber can be attached to the sides with slats, which help give the ottoman a round shape and make it more beautiful.
  • The rest of the structure is covered with fabric and secured with staples.
  • The wheels are screwed on or, as in the photo above, the cute little legs of the updated stool peek out from under the flirty upholstery.
  • The problem of how to make an ottoman from a stool was solved in a short time.

For those who like to knock

The rich Russian language raises many associations and questions. How to knock, where to knock, when to knock? For those who like to hit a nail with a hammer, we suggest making an ottoman with your own hands from boards and chipboard.

  • Rectangular pieces of 40x30 cm from chipboard are pre-prepared in the amount of 4 pieces.
  • A circle with a diameter of 30 cm and 4 wooden blocks.
  • Wood glue.
  • Furniture wheels with special fasteners.
  • Metal corners, screws.
  • Foam rubber and upholstery fabric.

As you can see, the set of necessary materials does not differ much from each other when we make an ottoman with our own hands, even in different ways:

  1. A box is assembled from rectangles. Metal corners and self-tapping screws are used, all corners of the structure are aligned, they must be straight.
  2. The bars on which the wheels will later be located are fixed with glue on the lower part.
  3. A base is attached to the top in an individually selected shape.
  4. The finished frame is upholstered using the same technology using foam rubber, fabric and a zipper on the cover.

For lovers of knitting and stuffing

How to make an ottoman with your own hands that is frameless and therefore soft. Needlewomen who know how to crochet will be able to knit a soft ottoman much faster, but not everyone may like their appearance.

Lovers of working with knitting needles present interesting models of ottomans knitted with them:

  • To work, you will need the thickest knitting needles that are available in stores.
  • For knitting needles with a diameter of 9 mm, fairly thick wool is suitable.
  • Ordinary threads offered in stores are too thin. The price for them is not high, but due to the fact that you will have to make thicker ones out of them, weaving them together, you will have to purchase a fairly large quantity, which will add to the cost of the product.
  • You can, of course, cut, unravel, and twist unnecessary knitwear, which takes a lot of time, and finding the right amount of plain knitted clothing at home that has become unusable is quite problematic.
  • It seems that the solution to the problem of how to make an ottoman with your own hands has reached a dead end, but cotton clotheslines caught my eye.

Attention: Synthetic clotheslines are not suitable for this job, and cotton ropes are difficult to buy in small towns.

  • For a soft ottoman of sufficient size, you will need 20-30 of these ropes, which are tied into a long rectangle.
  • The side is tied together with rope to create a spacious, wide skirt.
  • The bottom is tied with a rope of the same color and you get a bag that needs to be stuffed with something. There are 2 options here - use old items neatly stacked on shelves in the closet or go to the store and buy foam rubber or holofiber.
  • Unnecessary old items make the ottoman heavy and not as round and fluffy as those made from store-bought materials, but it frees up space in the closet for new clothes.
  • The top of the ottoman is decorated with the same rope and you can try out your product.

Ottoman from an old bucket

Here is another interesting solution for which we will need: an old plastic bucket, thick jute rope, a hot glue gun, a stapler, scissors, a cabinet handle, Velcro tape, upholstery fabric and a few new microfiber cloths. You will also need cardboard, but it will be better if you replace it with thin plywood.

  • First, wash the bucket and remove the metal handle.
  • Next, using hot glue, glue the outer surface of the bucket with rope, starting from the bottom.
  • Cut the end of the rope and hide it carefully.
  • Place the bottom of the bucket on the cardboard and trace it. Lay out the upholstery fabric according to the intended template and cut the round blank with a 5-centimeter outlet.
  • We make a hole in the center of the cardboard and fabric. We pass a bolt from a furniture handle through them and screw on the knob.
  • Next, we roll the fiber into tubes and radially wrap the bolt between the cardboard and paper, creating a kind of roll. To prevent the fiber from unwinding, we securely fix it with glue.
  • Then the fabric is stretched and secured on the reverse side with a stapler.
  • To hide the cardboard marks, cover the back of the seat with another piece of fabric, which needs to be placed on glue.
  • Cut the Velcro into four equal pieces and stick them crosswise onto the bottom of the bucket and the base of the saddle - with the bristles towards the bucket and the fluffy part towards the seat. Connect the two parts. Hooray! The ottoman is ready!

The result is such a useful craft that you can sit on comfortably.

Various options provide the opportunity to solve the problem of how to make an ottoman yourself from scrap materials that are available in abundance in any home. The only thing I still wanted to focus on was the floor in the room.

Laminate is quite sensitive to mechanical stress, so it is better to make an ottoman without wheels and legs, that is, with a solid bottom. On soft surfaces, carpet, ottomans on casters are appropriate, but for tiled flooring there are no restrictions, unless forged legs can be an exception.

Chipboard ottoman

In one toast, the hero of “Prisoner of the Caucasus” expressed the very essence of existence, so that “our desires coincide with our capabilities.” If you have free time and a desire to make an ottoman with your own hands from chipboard, you need to prepare the possibilities.

  • Tools and necessary materials are stocked in advance.
  • A good ottoman cannot be made without a good base made from a sheet of chipboard. The optimal size of the structure is within 400x400x500 mm.
  • You can make a wooden ottoman using a simplified technology, making a frame in the form of a mailbox from a timber and screwing it on with the side cuts, but since the ottoman is being made for yourself, you can try.

Work with pleasure

You should not start work in a bad mood: something will fall on your foot or you will hit the wrong nail with a hammer.

  • 5 squares of 400x400 mm are marked and cut from a sheet of chipboard to make the walls of the structure and the bottom.

Attention: The bottom of the ottoman should not be made of plywood; small children like to hide in secluded corners and can break thin plywood and get injured.

  • The lid can be made in any geometric shape: square, round, oval. Beginners can skip experimenting and stick with a square lid. It will have dimensions slightly larger than the main box 430x430 mm, in order to protect it from falling inside.
  • The height of the finished product is made up of its constituent elements - the height of the structure is 400 mm, plus the rollers are 50 mm, the bottom and tire are 32 mm thick, the upholstery is 50 mm thick, for a total of 532 mm.
  • From the prepared elements, the formation of the structure begins.
  • The sides of the ottoman are fastened with metal corners. The beams used to glue all the internal corners will help increase rigidity and reliability.
  • From the front side of the ottoman, the cutouts themselves are screwed into the beams, the heads of which should be recessed into the wood so that later there are no problems with torn upholstery.
  • The lower part of the box is coated with wood glue along the perimeter, capturing the ends of the beams.
  • The bottom of the ottoman is attached, and the cuts themselves are again screwed into the ends of the beams. The assembled structure must dry well.
  • The base of the ottoman has been made, but there are still no wheels and a lid on which you can sit in the future.
  • The lid is secured with 4 bars screwed from the inside. The work is carried out after you are sure that the lid closes smoothly and the side reinforcement bars do not interfere with the closing of the lid.
  • The finished structure is turned over, and the wheels are attached using the cuts themselves.

Attention: They are fixed through the bottom to the ends of the beams, for which small holes are drilled in the bottom.

Before continuing work, you need to make sure that the resulting structure is sufficiently stable, holds the person sitting on it well and there are no shortcomings that would interfere with further work, otherwise there is no point in starting the upholstery.

The ottoman gets dressed

A do-it-yourself ottoman made of wood, chipboard, or generally soft needs clothing on top. This function is performed with honor by high-quality upholstery fabric, neatly attached to the frame of the structure.

  • First, the cover of the ottoman is made, for which a soft lining is cut out from foam rubber, padding polyester, and batting. The size of the pad should correspond to the parameters of the seat so that it is neatly glued into place without drooping.
  • From the fabric intended for upholstery, a blank is cut out to be somewhat larger in size than the lid. This is done so that the edges can be folded under the lid and secured from the inside with a stapler or furniture nails.
  • The instructions instruct you to further design the sides of the ottoman.
  • A part is cut out from upholstery fabric 400 mm x 4 = 1600 mm with a margin for connection. Also in height, the material must have an allowance at the top and bottom.

Attention: The fabric must be straightened, stretched, tucked inward, and the edges must be secured with furniture nails or a stapler.

  • The seat is decorated, the niche is upholstered, all edges are carefully closed, and the finished product can be presented to discerning family members for inspection.
  • A do-it-yourself plywood ottoman is made according to the same pattern if you choose this simple design option.
  • The work becomes a little more complicated when an opening drawer is provided on the ottoman, then the stop bars are replaced with door hinges.

Getting acquainted with the design of this simple piece of furniture, one detail catches your eye: despite the difference in shapes of ottomans and their types, the base is a rigid frame, there is a seat and legs. They are decorated in different ways, but quilted leather or leatherette gives the products an elite, luxurious look and you cannot immediately determine that the price of the product is within reasonable limits.

Although, it should be noted that a neat ottoman, covered with a different material, can bring comfort and convenience to the room and looks no less elegant than a leather one.

Read also