The order of work during the construction of a house is clearly defined, and it is better to strictly adhere to it. And this applies to Euro-windows, both plastic and wooden. At what stage of construction is it better to install windows, and what will be the consequences of installing translucent structures at another time, the WINDOWS MEDIA portal will tell you.

A common practice in domestic private construction is to install windows just before winter in bare walls to close the inner shell and be able to carry out finishing work that is usually wet and dirty. This is a common mistake in the art of construction.

Irreversible consequences of “amateur” in window installation

Ideally, if the installation of windows and doors will be carried out after completing and drying the screed and interior plaster, but before laying insulation outer wall. This sequence of work will ensure that the insulation layer around the windows does not accumulate excess moisture (which in winter will lead to condensation in the insulation layer, further freezing in the foam layer, and, consequently, degradation cellular structure polyurethane foam).

In the case of wooden windows, excess moisture can cause swelling of window frames, cracks in the painted surface, and even frame joints, as well as corrosion of hardware components. Remember that windows are designed for "normal" operating conditions, which fluctuate around an internal temperature of 20 degrees Celsius and relative humidity in the range of 50-60%. Very often, ensuring precisely these conditions of use is the starting point of the warranty documents of Eurowindow manufacturers.

At what stage of construction should Euro windows be installed?

Wooden windows. It is better to install them after completing “wet” work inside the house. If you install them first, then high level indoor humidity (about 90%) can cause irreparable damage to wooden frames. Although manufacturers claim that modern wooden windows are resistant to moisture from precipitation and do not deform, but their installation is not recommended before plastering and screeding. Some of them even warn that the guarantee offered for euro-windows made of wood loses its relevance if, after installing the joinery, “wet” work was carried out in damp, ineffectively ventilated and poorly heated rooms.

PVC windows. It does not matter whether their installation is planned before or after “wet” work. Should always provide effective ventilation premises (if necessary, heating) so that moisture does not condense on the surface of the glass unit, because it can then move to the slope and subsequently cause mold to appear.

“Wet” work in winter. Often construction work is completed at the end of autumn and the installation of windows and finishing work falls on winter period. In this situation, it would be better to choose plastic windows, which in principle can be installed at any time of the year (although days when the temperature drops below -5 ° C should be avoided, even if winter foam is used for sealing, which can work at temperatures up to - 10 °C). If the winter is cold, it is best to postpone the installation of plastic windows to spring period. Very low temperatures will cause the PVC to become brittle, which can lead to cracking of the profile during transportation, unloading and installation.

It is also better to wait until spring to install wooden euro-windows. However, if Euro-windows have already been installed, and there is a desire to finish the house in winter, it is worth considering whether wet work should be replaced with dry work. Laying plasterboard and plasterboard boards does not have great influence on indoor humidity, and also does not delay further finishing work. When work is interrupted for the winter, and the windows have already been installed, it is important to ensure ventilation in the rooms, otherwise the accumulated moisture will condense inside the house - most likely on the windows.

The most useful sequence of work when installing Euro windows

Thanks to this sequence, it will be possible to avoid contamination or damage to the window, high humidity in the house, and unnecessary duplication of work (correction of previously completed slopes damaged during window installation).

Installation of windows before or after plastering

Before plastering. If the finishing work will be carried out in the spring and summer, the windows can be installed before the “wet” work. They must be shielded protective film or during plastering, you can remove the sash and carefully protect the frames. You can also install windows, plaster the slopes and corners, and then, having protected the windows with a special film, plaster the remaining surfaces of the walls. Applying plaster requires temperatures above 5 °C, so when planning this work for the winter (especially gypsum plaster), Euro-windows should be installed first. This sequence of work is acceptable if you decide to install plastic windows.

When installing wooden windows, it is better to wait until completely dry plaster. If windows are installed in the fall before plastering, they should be carefully screened with film and left open to allow moisture to be removed.

After plastering. It is best to plaster the walls inside, leaving the slopes and corners unplastered. After they dry, the windows are installed, and after the foam has dried and hardened, the slopes are plastered. This approach is especially appropriate in the case of wooden windows. Then it is possible to avoid their possible contact with excess moisture from drying out the plaster.

It happens, however, that plasterers do not want to agree to complete the slopes. If you plan to install drywall, then with finishing window opening A team of plasterboard installers can help. After installing the window, cut plasterboard slabs are glued to the opening in a certain way. You can, of course, completely plaster the walls and slopes, but after that it will be difficult to install windows without damaging the plaster.

Installing a window after performing “wet” work in interiors has another advantage: the surface of the frame and glass units are not subject to contamination, scratches and irreversible damage by other workers construction crew. Unfortunately, there is a risk of not avoiding this when installing insulation around a window frame or sill. Therefore, before starting insulation work, you should protect the window along with the frames with a layer of special film.

The vacation period quite often coincides with people’s desire to make repairs to their apartment or house, and since most people choose the summer months for their vacation, renovation work is planned specifically for the summer. At the same time with general repairs Usually, plastic windows are installed or repaired, because it’s nice to immediately put the apartment in decent shape, so as not to have to worry about its appearance for several years.

But all this applies to complete renovations in the house, and what if the decision was made to only install new windows? You will probably need to choose the most convenient time for the season, because the window openings will be open throughout the day. Despite the fact that the plastic profile is easy to install, in cold weather it is not so flexible, and therefore there will definitely be difficulties in installation.

In what season is it better to install plastic windows?

New technological solutions appear every year, and if a decade ago experts said that plastic windows could only be installed in the warm season, now it is possible to do this when there is a special need for it.

Of course, even now there are some issues that will require special attention, but if critical events occur, plastic windows can be installed at any time.

Advantages and difficulties of installing windows in winter:

• An undoubted advantage will be the cost of plastic windows, which drops during the season of low demand. Some clients use this moment to buy windows in advance for the proposed renovation, and plan the actual installation for the summer;
• During installation, you can immediately check the tightness, because even a small defect will immediately appear as a draft. As a result, either the defect will be eliminated immediately, or the window will be replaced with a similar one, and no further alterations will be required;
• can only interfere with the installation very coldy, at which even heat shields do not help maintain the temperature of the window opening acceptable for work. While the windows are being installed, it will be cold in the apartment, so you need to immediately plan that you will not be able to stay in the house;
• The polyurethane foam that is used when installing a window requires a certain external temperature, and humidity will also play an important role. Among the technological innovations, we can confidently highlight the presence of special foam for installing windows in winter conditions, but there is a limit here (not lower than 15 degrees below zero).

Advantages and difficulties of summer window installation:

• comfortable temperature and low humidity will allow specialists to work much faster, and the residents themselves will be able to stay in the apartment. The window openings will be constantly open, but this will not create difficulties, because in summer it is quite warm even in the evenings;
• long daylight hours will allow you to install a window unit in one working day, all work will be done quickly. By evening, apartment residents will enjoy the view from the new window, since all work will be completed at once;
• Everyone understands the benefits of installing windows in the summer, so the demand for plastic frames rises sharply, therefore, the prices for windows will increase compared to winter or late autumn.

The most favorable period for installation of plastic windows is the last months of spring, when it is already quite warm, but there is still no rush to buy windows. If you did not purchase plastic windows in the winter, then you can purchase and install windows in the spring - it is economical and convenient in all respects.

Many people are interested in the question: is it possible to install windows in winter? And really, is it possible? In fact, not everyone thinks about this. As a rule, when the opportunity arises to change the windows to more modern ones, then they do it. And in winter you can still get a discount, because the companies that do this don’t have that many orders in cold period. Also, the windows themselves will be manufactured faster for the reasons stated above. In general, everything seems to indicate that there is no need to wait for the warm season. Well, of course, the house will be cold during installation, but then you can warm everything up. It doesn't seem to be a problem. In addition, if the installers know their job, the work will be completed promptly.

But is this really so? In this article we are going to raise the question - is it possible to install plastic windows in winter?

The Teplo Doma company offers its assistance in installing and repairing windows. It doesn’t matter to us when you need our services: in winter or summer. Our specialists always strive to do their work efficiently. We are responsible for everything we do. If you have decided to change your windows, then all you have to do is contact our online consultant.

Installation of plastic windows in winter

Do they install windows in winter? There is a myth circulating on the Internet that installing plastic windows in winter is strictly prohibited. Many people willingly believe in this, without going into details. For most, the main thing is that everything works for a long time and does not create problems. And asking some unnecessary questions is unnecessary.

However, there is one small “but” - In winter, plastic windows can be installed. Nobody forbids you to do this. Even according to GOST this is allowed. Of course, there are some nuances and rules. If you follow them, then no problems will arise. There are recommendations from the window manufacturer, and experienced installers are also aware of them.

For example, a window that has just been delivered cannot be installed. Why? The fact is that in the cold, plastic tends to shrink. After installation, the window will heat up from the room and may leak. That is why, before installation, it is necessary for metal-plastic structures to lie in a warm room for some time.

Is it possible to install plastic windows in winter? Yes, but not at -15 degrees. Why not? The thing is sealing rubber. In the cold it will stiffen, and it will be very difficult for installers to make an accurate connection of the sash. Although, on the other hand, if the double-glazed window warms up in the room, then it is unlikely that it will freeze so much even when open window opening. Therefore, in principle, there is nothing to worry about.

Another thing is cooling the apartment. After all, during installation you will have to completely open the window opening.

Is it dangerous to cool an apartment when installing windows in the winter?

But really, what should we do about it? Even the most efficient craftsmen will not be able to do the job so quickly as not to cool the room. Right? With an open window, the room will become colder every second. So?

Many owners first begin to worry about their expensive repairs. After all, most materials intended for interior decoration, not suitable for use in sub-zero temperatures. That is why a logical question arises: “Is it worth installing plastic windows in winter?”

All this looks like horror stories that for some reason scare gullible citizens. Where should the sub-zero temperature come from in the room? After the old window is dismantled, the film is immediately stretched in its place. The door to the room closes. Work with a completely open opening lasts no more than 30 minutes. In practice, the room temperature drops by only 10 degrees. If you don’t want this either, you can simply turn on the fan heater, and then the temperature regime will remain without much change.

Winter installation and its quality

In fact, the quality of installation, both in winter and in summer time depends mainly on the experience of the craftsmen carrying out the repair work. Also, do not forget about the quality of the materials used. But the question is definitely not appropriate here: at what temperature are windows installed in winter? From all this it follows that problems may begin with windows installed in the summer within a month, and metal-plastic structures installed in the winter will serve faithfully for many years. Or maybe everything will be the other way around.

In general, installation of plastic windows in winter is not much different from work carried out in the warm season. Although there are still some nuances:

• First you need to dismantle the old windows.
• Then comes the preparation of the opening: cleaning it from ice, snow and dirt, heating it with a hairdryer. The latter is done for better adhesion of the polyurethane foam to the surface.
• Installation of the box.
• Foaming. In this case, special frost-resistant polyurethane foam is used.
• Insulation of slopes.
• Window sill installation.
• Equipping windows with fittings and adjusting them.
• It is advisable that the temperature outside is not below -15 degrees.

Window testing

After installing a window, every owner considers it his duty to check its operation. And it is right. You need to make sure that plastic windows can be installed in winter. By the way, it is worth noting that checking the operation of windows in cold weather is much easier. After all, it’s warm inside and cold outside. You can immediately feel whether it is blowing or not.

So, first you should check the window for tightness. For this you will need a regular A4 sheet. You need to pinch it with the sash and then try to pull it out. Naturally, the attempt should not be successful. The sash should be checked on each side.

You can find out if it is blowing from a window using an ordinary candle. Set it on fire and drive around the perimeter. If there is a delay somewhere, then the installers should not be released.

Important! The window should close tightly, there should be no blowing from it, and the sash should not catch anything. If noise continues to be heard from the street, then most likely an installation error was made.

But in order not to worry again, you should contact a company that has already proven itself on this issue.

Results

When is it better to install windows: winter or summer? Whenever is convenient for you. In winter you can “run into” a good deal, and in summer it is more comfortable to carry out repair work. If we are talking about the quality of installation, then a good specialist no matter when to install. Although, as already noted, it is not recommended to carry out work in severe frosts.

That's probably all.

Where to order window installation in winter in Moscow?

We present to your attention the services of the Teplo Doma company. Our specialists will install and repair windows equally well in both summer and winter. Only unscrupulous craftsmen can blame the time of year for the fact that a window does not perform its functions. We all understand this and want you to understand it too. If you want the work to be done efficiently and quickly, then contact us. Right now you can discuss this issue with our consultant.

Is it possible to install a plastic window in winter?

Korovin Sergey Dmitrievich

Master of Architecture, graduated from Samara State University of Architecture and Civil Engineering. 11 years of experience in design and construction.

Modern windows are installed not only to replace old wooden ones; they are often preferred in the construction of new housing. What to do if the process of installing a window unit falls in the winter? Is it possible to install plastic windows in winter or will this process have to be postponed until spring?

When to install windows

Of course, it is best to do a leisurely replacement or installation in the warm season under normal weather conditions and positive temperatures. But, if the construction of a new house has been delayed, then it is also possible to install plastic windows in winter. The same applies to replacing old windows with new ones. There are some positive aspects to this season, but you need to take into account some nuances. So is it possible to install plastic windows in winter?

Advantages of winter installation

Windows in our country are a seasonal product. Most consumers try to have time to carry out installation in the spring and summer, when it is more convenient. Most often, window installation companies work under increased load during this period, so owners have to wait longer for orders to be completed.

In winter, the demand for installation and construction work drops sharply

Installing windows in winter, on the contrary, gives an advantage in the quality of order fulfillment. Majority construction work, including window installation, is less in demand during the cold season. At this time you can find interesting offers for the production and installation of window systems: promotions, discounts and others. In addition, the installers will not rush, since the schedule is not so tight, which will affect the quality of the installation. These are the main advantages with which you should not be afraid to install windows in winter.

Nuances of the cold season

It is important to consider the temperature at which the installation is carried out. It is prohibited to install plastic windows in winter at temperatures below -20 degrees. In this case construction foam, which is used as a sealant, will contain a large number of ice crystals, and the quality of such an installation will be much lower. And after a while, consequences such as freezing and mold will appear.

Also, if there is too much frost (-15 and below), the seals of opening windows become less elastic, which can lead to poor adjustment of the sashes.

The sealant for PVC windows loses its quality during installation work at temperatures below 15 degrees

If you plan to install plastic windows in a new building in winter, then permissible temperatures air, all work can be carried out without problems.

Another thing is replacement in residential premises. It is worth considering that installation time is 30-40 minutes for each double-glazed window, and the rooms will cool down. To do this, unlike in the summer, you need to dismantle and replace double-glazed windows in stages.

In winter, after the double-glazed windows are delivered, they need to be kept in the house at room temperature for 24 hours so that all the elements warm up. This is done in order to avoid thermal deformation.

Another option for winter installation is to carry out the so-called warm installation of window systems.

Winter installation technology

Installation of window units in winter is complicated by low temperatures and high humidity. It is necessary to somehow neutralize these negative conditions. To do this, installers can use two methods for winter installation of double-glazed windows.

The simplest winter installation

As mentioned above, in winter some nuances must be observed in accordance with the time of year.

In the cold season, frost-resistant polyurethane foam must be used to seal joints.

• Firstly, for sealing you need to use polyurethane foam with frost-resistant components in the composition.
• Secondly, in the cold season, a “heat” gun is used when foaming joints. It is used to warm up the layer of applied foam on the street side. And only then do they start filling the gaps from the inside with foam. This is done to ensure that all voids are properly filled with sealant (foam).
• Thirdly, this step-by-step installation. That is, having dismantled the old one, they immediately installed a new one, and so on one by one, working with each opening.
• Fourthly, the mounting tape is attached in warm conditions. If possibilities allow, then before removing the old ones.
• And fifthly, hydro- and vapor barrier tape(PSUL) is also heated by a “heat” gun during installation.

Using a heat gun, the joint surfaces and PSUL tape are heated

This is the most basic “winter” technology for installing double-glazed windows, without which it is impossible to obtain a high-quality result.

Warm installation

The use of this technology will increase the cost of installing windows, but its use can smooth out the conditions of the winter season.

What does the technology of warm installation of plastic windows provide?

• Warm installation of windows is a mandatory external sealing of the opening. To protect the installation site, a protective screen is attached to the opening on the street side. Thermal screen for window installation keeps heated air in the room and prevents freezing installed double glazed windows. In addition, such protection will not allow excess moisture to enter.
• For compaction, as with conventional winter installations, frost-resistant polyurethane foam is used.
• Compliance with internal sealing of the joints between the frame and the opening is mandatory. Inside there is silicone (a sealant that prevents moisture from entering). The middle layer will be polyurethane foam, which acts as a sealant and insulates the joint. From the outside, all gaps are covered with waterproof tape.

Installation of windows in winter involves a work algorithm similar to the usual one for installation in the warm season:

• The opening closes;
• dismantling old frames;
• preparation of the opening surface;
• installation work;
• finishing of slopes.

The protective screen ensures reliable and high-quality installation of PVC windows in winter

The use of warm installation technology is more preferable in winter. A protective screen in combination with materials will ensure better installation without additional risks (destruction of the seal, the appearance of mold and mildew) in any type of building (brick, panel or block house) . In addition, the use of triple protection during warm installation will increase the tightness, which will reduce heating costs.

Additional work

Required condition high-quality installation both in winter and in summer there will be finishing of the slopes of the window opening following installation.

Why are these needed? additional work? The main function of finishing slopes is to protect the gaps between the window and the opening from temperature changes and moisture. Foam is an excellent sealant and insulation material, but it is very sensitive to ultraviolet rays and humidity. If you do not close the gaps, in a month the sealing layer will lose its properties, and by spring it will begin to collapse.

It is better to finish the slopes of a window opening with insulation

After installation work comes finishing work. It is best to make the slopes warm, that is, with an additional layer of insulation (foam, mineral wool) . In the schematic drawing you can see one of the options for insulating the internal opening. This is not a very big expense. But in this way the thermal insulation of the window will be improved.

How good is the installation?

How to understand that the windows were installed without violations of technology?

• The glass unit does not fog up and does not freeze.
• There are no drafts from under the frame or sash. When installing windows, they are adjusted and set to seasonal settings. You can check for a draft by holding a lit match or lighter to the window. If the light does not fluctuate or go out, then the sealing is correct.
• The sash opens easily without the use of significant effort, the same applies to switching to ventilation mode.
• When opening or pressing the frame there is no play in the entire system.
• There should be no gaps between the profile and the window opening.
• All joints with sills and window sills are carefully sealed with silicone.

The installer is obliged to check the quality of work and provide warranty service for double-glazed windows.

Also, during operation over a significant period of time (several seasons), the frame should not sag or become loose in the opening. And all the fittings work correctly, without jamming or failure. If there are violations listed in the list, then you need to contact the installer company. Typically, all manufacturers and installers provide a service guarantee and such defects are eliminated free of charge.

The answer to the question whether it is possible to install plastic windows in winter is yes, but taking into account some nuances. One of them is compliance temperature regime. Installation of PVC windows in winter is a more technologically demanding process, but it is possible, just as in summer. In addition, correctly installed plastic double-glazed windows will significantly reduce heating costs.

Is it possible to install plastic windows in an apartment in winter?

It must be admitted that apartment or house owners rarely think about heating their homes during the hot season. You can probably say this about yourself. But when the rooms become really cold, strong drafts are felt, blowing out all the heat, and the window is covered with frost, people begin to worry that it would be a good idea to replace the old windows with high-quality and more insulated ones. The frost on the glass then turns into water, which flows down the window sill and spoils the wall cladding.

In this case, it is important to understand whether it is possible to install plastic windows in winter? The answer is yes, however, when carrying out such work, certain rules must be followed.

Is it dangerous to replace windows in winter? Opinions

During the period when the old window is removed and a new one is installed, the room can become very cold. At the same time, according to buyers, materials for interior decoration deteriorate, because they are not prepared for sudden temperature changes. You will encounter this problem if you decide to replace a window with an unqualified team. Installation will take a lot of time. Otherwise, the work will take no more than half an hour. During this time, nothing will happen to the new renovation, while apartment owners recommend protecting heat-loving plants from frost.

When deciding whether it is possible to install plastic windows in winter, you will need to prepare the room. For this purpose, products and surfaces that may be damaged are covered with moisture-proof materials. This applies to books and technology. If you are wondering whether it is possible to install plastic windows in winter, reviews about this are worth reading. From them you can find out that the room where the glass unit is being replaced is closed tightly so that cold air did not penetrate into other rooms.

Features of winter window installation

If you still haven’t decided for yourself whether it’s worth replacing double-glazed windows in the winter, then you should consider some of the advantages of carrying out such work in the cold season. The advantage is that you can find big discounts on installing windows in winter, because most consumers prefer to do it in the summer. The demand for plastic windows is falling, and manufacturers are making concessions to increase the number of customers.

When thinking about whether it is possible to install plastic windows in winter, it is worth familiarizing yourself with state standards, from which you can find out that such work is carried out at any time of the year, but you need to take into account that the temperature outside the window should not fall below -15 °C. Wind speed is also important; it should not be more than 8 m per second. Otherwise, sealant and foam, as well as other building mixtures may freeze and become fragile. Therefore, before calling specialists, you need to check the weather forecast and choose a suitable day.

If you still haven’t decided for yourself whether it’s possible to install plastic windows in winter, then you should remember about the internal climate. Sometimes such work is carried out in new buildings. Brought double-glazed windows must be acclimatized at positive temperatures. Typically, window transport vehicles have an open body. When exposed to cold, low-quality plastic may shrink. If you find such a defect, then after installation is completed the windows may “float” and lose their rigidity, as well as their original shape.

Effect of cold on materials

Without exception, all modern companies whose activities are aimed at installing plastic windows are engaged in the winter installation of double-glazed windows. However, before you call the specialists, you should ask which manufacturer’s profiles they use. For example, the Veka company positions its products as windows that are not afraid of any frost.

Professionals emphasize that the problem can be expressed in polyurethane foam. It expands as it flows chemical reaction. Upon contact with water, polymerization occurs. The colder the air, the lower its humidity will be. As a result, low temperatures can cause the foam to simply not work and remain in a preserved state. When it gets warmer outside, the material will begin to swell with all the ensuing consequences.

The problem exists, but is easily solved by using sealants and foams special purpose. It is important to ask whether specialists use winter compounds that allow installation down to -25 °C. Some polyurethane foams have an even lower temperature limit.

When consumers decide whether it is possible to install plastic windows in an apartment in winter, they often learn about the fact that when such work is carried out, a protective screen is sometimes installed in the opening. It prevents cold wind from entering the room. But this approach is relevant when the frost outside is unbearable.

Installation of double-glazed windows in a house under construction. Is it worth starting work in winter?

When it comes to installing double-glazed windows in a residential building in winter, a great many questions may arise. Their number increases when the consumer thinks about whether it is possible to install plastic windows in winter unheated room? The answer here is also yes.

However, you should only use materials that are designed to withstand sub-zero temperatures. Their polymerization occurs under difficult conditions, and the properties do not change. As a result, you will be able to get windows that will not “cry”. This is what buyers most often worry about when they plan to update the double-glazed windows in an apartment or house. But at the same time, you should be prepared that the company sometimes increases the price of expensive foam.

Additional complications

The problem can also be expressed in the fact that the room will have to be cleared of all pieces of furniture and plants, which is not always possible. This is due to the fact that the old windows will not have to be removed until the new ones are in place. This is due to the fact that the count will be in minutes.

Is it worth it?

When you know the answer to the question of whether it is possible to install plastic windows in the winter in a house under construction, you should think three times about the feasibility of carrying out such work. There are several other ways to improve indoor comfort. You can implement internal insulation or use economical modern heating devices. And then, after waiting for spring, call specialists who will not disturb the comfort of the household.

Finally

If you want to install double-glazed windows when the temperature outside the window has dropped below zero, you should contact a qualified company. Its specialists are trained and prepared for such work. They will carry out everything quite quickly, and the house will remain “naked” for a minimum time.

Within half an hour after the old structure is removed, a new one will appear in the opening. Its position will only need to be oriented vertically and the gaps filled. If you are wondering whether it is possible to install plastic windows in winter wooden house, then you should take into account that experts advise waiting until spring. But if you want to make your home truly cozy and warm tomorrow, then you should choose the profiles of well-known companies. One of them is “Veka”, which recommends installing its windows on Far North and in Siberia.

Is it worth installing plastic windows in winter?

We hear from window manufacturers that winter installation has many advantages, but nevertheless we prefer to leave this process for the warm season. It would be great if there was confidence that everything would go smoothly and installing windows in winter would not result in additional problems.

By the way, we can say that winter is a time when we generally have fewer worries. After all, in the summer you want to spend more time with friends and family, travel, especially since summer ends very quickly. So why waste time replacing windows in the summer, if you can do it perfectly in the winter, and just enjoy it in the summer and have more free time?

Benefits of changing windows in winter

Oleg Kolkutin, head of the installation department of the IRTYSH WINDOWS company, will talk about the advantages of winter installation and the features associated with installing windows in winter :

1) Better price. In winter, all window companies offer good discounts and this is truly an opportunity to buy windows at a better price. What's the catch? A very big discount is a clear sign that the company will save on the quality of materials. For example, a company spends 50% of the money received from the client on the purchase of materials. The remaining 50% goes towards payment fixed costs: rent, taxes, employee salaries, and these expenses are constant, that is, they cannot be reduced. Therefore, the discount is mainly given due to the price of materials: cheaper seals, fittings, thinner metal, etc. Conclusion: if you see a suspiciously large discount, you should be wary and ask the manufacturer in more detail about the quality of the materials offered. However, a discount of 10-15% is just healthy competition, and there is hardly anything bad hidden behind it.

2) The quality of the window is immediately obvious. In warm seasons, it is difficult to objectively judge the quality of installed plastic windows, because they, first of all, should protect your home from winter cold, and when it’s warm outside, you can only evaluate sound insulation, which is secondary. Any windows immediately show their true face only in winter. What's the catch? Yes, indeed, in winter you can immediately evaluate the result of the work: is there any ventilation, are the windows freezing, etc. However, what will this actually change? The result is the same - you still have to call the company’s employees again so that the work is completed in full and efficiently. Conclusion: if the work is done by professionals, then it is of the same quality both in winter and in summer. To maintain heat in the room during the cold season, you can use special installation with the opening closed with a special material similar to a tent.

3) Unforeseen circumstances during the installation process. Perhaps the most unpleasant thing is when the new window does not fit, and the old one has already been dismantled. Even if the company fulfills all warranty obligations and produces a new window correct size, stress is guaranteed for you. Anyone can make mistakes and such cases cannot be reduced to zero. However, if the company is professional, it will never allow a situation where the client is left without a window. In our company, before dismantling a window, installers check the new window for compliance with the dimensions of the opening. In this case, the maximum that you will have to endure if the window does not match the size of the opening is rescheduling the installation to another date!

Conclusion

The conclusion that can be drawn is: it doesn’t matter what time of year you plan to install windows. It is important which company you hire to do this work. And if you turn to professionals, then you really have the opportunity to buy good windows on favorable terms and install them in a shorter time.

Good question: Is it possible to install plastic windows in winter?

What to be wary of when installing windows in the cold season, and how these problems are solved

There are several factors that make winter window installation relevant. For example, clients often want to replace windows just when it gets colder, but they can't always do it in the fall. Another option is a house under construction, when you urgently need to install windows to “close the perimeter,” turn on the heating and do finishing work in the winter. In addition, window companies want to ensure production capacity and installation teams and during the cold season, and therefore in winter they often offer good discounts on their products.

And here the question arises: at what temperature can plastic windows be installed? My window mechanic friends give different numbers. A former window installer from Novosibirsk (now a technologist at a large Moscow company) claims that in calm weather, taking all precautions, you can work down to -25 degrees. And an equally competent Moscow specialist does not recommend installation if the thermometer drops below -1 0.

Problems with winter window installation
Many people fear that when replacing windows at low temperatures, the room will freeze and damage the heating systems. In addition, the most common windows today are made of polyvinyl chloride (PVC), or, as we say, plastic windows. And PVC becomes brittle at low temperatures, and there is a danger of cracks appearing due to mechanical stress on the structure during installation. Polyurethane foam, most often used to fill the mounting joints of a window block with an opening, requires water vapor for polymerization, of which there is very little in the air in winter (a lot in summer). And at low temperatures, the foam may freeze before it polymerizes. It seems that the answer to the question “when is it better to install plastic windows: in winter or in summer” is clear - it is better to install windows in the warm season. Not certainly in that way.

Yes, modern sealed windows came to us from quite warm European countries. But we live in a country with a harsh climate - look at the temperature reports below.

In the diagram: archived data on average winter temperatures in Moscow

In such conditions, you need to look at things realistically. If there is a construction task for winter installation, install it in winter. But look for compromise solutions that allow installation conditions to be brought closer to summer conditions in winter. What could they be?

Problem 1. Freezing of a house or apartment
This is a myth on the topic “when is the best time to install windows.” Qualified and experienced installers organize the process in such a way that the window opening remains open for a very short time (from 20 to 50 minutes). During this time, only the air in the room cools; the walls cannot freeze.

Of course, in winter, unlike in summer, certain measures must be taken: not install all the windows at once, but one at a time in different rooms. During installation, keep the door to the corridor closed so that the thermal draft in the exhaust ducts draws less cold air into the room. In addition, it is better to install windows in calm weather.

In the photo: a transparent heat shield for winter installation of windows. Photo from the site 4geo.ru

Protection from inconvenience - T eflon screens
And yet, at what temperature can plastic windows be installed so that the installation is high-quality and the specialists feel comfortable working? It turns out that almost any time. In situations where the temperature is low and the weather is windy, and the customer fears inconvenience during installation, special protective screens are used that make the installation of windows in winter quite convenient. On the Internet you can easily find videos that tell in detail about the installation and use of such screens.

Fact: Installers are inventive people. If it is not possible to purchase a professional heat screen, various homemade screens and curtains made from film materials are used. And their quality is sometimes not inferior to industrial ones.

Problem 2. Embrittlement of PVC profiles
This problem is also being solved. Window blocks that are frozen in the warehouse and during transportation are kept in a warm room for a day. In addition, when using thermal screens, the windows are already in a warm zone during installation. If you need to install windows in a frozen new country house, the openings are covered with film before installation and the room is heated to above-zero temperatures using heat guns.

Problem 3: Polyurethane foam freezing
Competent installers warm the foam in a water bath before use or simply leave it in a warm room overnight. To speed up the polymerization process, warm up before applying foam. window slopes using hair dryers, the foam itself is applied in two approaches, special PSUL tapes (pre-compressed self-expanding sealing tape) are used for primary sealing, the surface of the slopes is wetted before applying the foam, etc. A special “winter foam” is also produced, which, according to manufacturers, can be used down to –15 degrees (regular “summer” foam - up to +5 degrees).

Fact: The quality of window installation in winter (and not only) directly depends on the professionalism of the installers. And winter installation of windows has its advantages: due to less workload at window companies, you can get not only good discounts, but also more competent installers for your facility.

Installing windows is not enough - we need to save them
And in moderate frosts, in compliance with all the rules, competent installers installed the windows, adjusted them, and you signed the acceptance certificate. Now what? In the case of an ordinary, lived-in apartment, everything is simple: minimally damaged wallpaper can be carefully glued, you can calmly wait for the summer and make cosmetic repairs.

It’s worse when it’s a new building, where “European-quality renovation” is done with the involvement of “specialists” from the post-Soviet space. It has already become a bad habit to start such repairs with the replacement of windows. What does this mean?

In the photo: windows installed at the very beginning of the renovation may not survive to the end

1. Builders often throw out materials through open doors. construction garbage, and by the time the work is completed, the fittings are clogged with cement and brick dust. When trying to close the sashes, their fittings can easily be damaged.

2. Carrying out "wet" construction and finishing works(screeds, brick partitions, wallpapering, using paints on water based etc.) lead to a sharp increase in air humidity and, accordingly, condensation on slopes and window structures. Moreover, this can continue for months, and the workers refuse to do even basic ventilation to reduce air humidity, because “it’s blowing for them” and “the wallpaper is warping.”

The situation is even worse at large facilities, where internal construction and finishing work can continue for more than one winter. These photographs show “dead” windows from Sweden. They could no longer be repaired and had to be replaced. The object is an elite residential building in the center of Moscow.

Conclusion: There is no need to start your renovation by replacing windows. If windows made of PVC and “warm aluminum” can still be washed and cleaned after finishing work, then “Euro-windows” made of wood, combined wood-aluminum and aluminum-wood windows can receive irreversible damage. The same applies to window sills made of plastic and wood: sometimes “bulls” are stewed over them, and in dirty boots they walk on them.

In the photo: an example of condensation on windows in winter with high humidity indoors. It is better to postpone installation until the end of the finishing work, after finishing the “wet” processes and drying the premises. Otherwise, condensation on the glass and mold on the slopes will not keep you waiting long

Advice: If there is a long period of internal construction and finishing work, including in winter, the window openings must be closed with “ersatz windows” (frames made of wooden blocks, covered in two layers plastic film). This is exactly what they did during the construction of this house in St. Petersburg (pictured). After finishing the dirty and “wet” work, the “ersatz windows” will be replaced with normal ones.

YOUR TURN…
Do you think in What time of year is it better to install plastic windows? Are you ready to take the plunge for winter installation? Why yes? Why not?

Last spring, while putting up the windows after the winter cold, you firmly decided: “Stop! This summer I’m replacing the windows!” Romantic time of dachas, vacations, high temperatures and the heavy rains have safely come to an end and you are again in front of the window with strips of foam rubber and paper. "Stop! Why didn't I change the windows?"

You didn’t change the windows because summer is a precious time that needs to be devoted to children, family, loved ones and yourself, and let the windows wait for winter. This the right approach, and professionals support him! Many employees of window companies specifically wait for the winter to change the windows in their apartments, and they are a good judge of this.

Many people are concerned that during installation the apartment may become very cold, which is not in the best possible way will affect heating systems. In fact, this doubt is not justified. On average, installation of a standard window lasts 1.5 hours, of which the opening remains open for 30 minutes (maximum 50 minutes). During this time, only the air in the room will have time to cool, so...

0 0

The most best time to replace old windows with new ones plastic profile is autumn and summer. If you think so, then you are one of the 90% of those who think the same way.

Installing windows during this period is a tribute to weather conditions that are comfortable and safe for the living space where glazing is planned to be replaced. In addition, it is during this period that the majority of repair work, which are often associated with updating window frames or installing new windows. That is, in fact, summer and autumn are the very seasons when buyers are looking for windows the most and, accordingly, when window companies experience a period of growth.

Why is the customer willing to pay double the price?

As a rule, an increase in demand is accompanied by an increase in the load on production. Busy workshops force window sellers to increase delivery times finished products- they are pushed to do this by increasing production times. Those entrepreneurs who do not want to give up this way...

0 0

The plastic window market is very specific and has a seasonal orientation, with underutilization of plastic window production from December to June (OFF-SEASON) and heavy workload from July to November (SEASON). The seasonality of work significantly limits production growth, since in the winter and spring months equipment is idle and production suffers losses, workers receive low wages and there is a turnover of qualified personnel. Therefore, during the season, manufacturers of plastic windows strive to get maximum profits and retain maximum orders, and in the off-season to attract maximum amount clients. Thus, the strategy of sellers of plastic windows at different times is different and the question is: “When is it better to install plastic windows?” quite possible.

Installation of plastic windows during the season

During the season, it is necessary to retain a large number of customers, but there is not enough capacity, the production time for plastic windows increases, and the client...

0 0

At what time of year is it better to install plastic windows? This is a question asked by many who are doing renovations or are just planning to do it. Is it possible to install plastic windows in winter, and what is it like, installing windows in winter. I will try to tell you about all this today.

And so, when it is better to change windows, installing plastic windows in the winter season is technically practically no different from installing them in the summer, although many claim the opposite, and see only disadvantages in this, but in vain.

Saving

A large number of companies offer big discounts on window installation in winter. All this is not due to problems in installing windows in the cold season, but to the traditional decline in consumer activity; few people replace windows in winter, so there are few clients. Of course, it is more convenient to replace windows in the summer, and carry out all repairs in warm weather, but in the summer, this is an expensive task, and in the summer, usually no one has any money, everything goes to vacations and summer cottages.

In winter, you can save a lot of money...

0 0

0 0

When to replace windows - in summer or winter?

When is the best time to replace windows?

Replace windows with plastic windows better in winter. There are several important reasons for this:

1. Summer is a precious and short time that needs to be devoted to children, family and friends, and the windows will wait until winter. Many employees of window installation companies wait until winter to replace the windows in their apartments, and they know a lot about installing plastic windows.

2. The peak in the window business occurs in September; it is during the summer period that the load in all areas of the window company is maximum. Window installers are no exception. In winter, installers work slowly and spend more time on orders than in summer.

3. When installing plastic windows in winter, all the shortcomings in the installation of windows and insulation of window slopes after foaming the opening are immediately visible. If there is a draft or fogging of the windows, the problem is corrected immediately. This is easy to do, since in summer the air temperature is the same indoors and outdoors, and in winter...

0 0

It is advisable that only quality materials, since it is this indicator that determines how long the window will last and how often it will have to be repaired. It is important to check how well the seams are secured at the joints between the frame and the wall, because it is subject to very large mechanical loads caused by fluctuations in the size of parts of the structure due to changes in temperature and humidity. If the seal of the seam is broken, then on glass with inside droplets of condensed steam will appear, and the joint itself may crack. What affects the quality of installation of a plastic window?

1. Accuracy of measurements. The window must be made in exact accordance with the dimensions of the window opening. Before concluding a contract for the installation of a product, you must take the most accurate measurements. This can best be done by specialists from window companies.

2. Quality production. When making a frame, you must...

0 0

Have you decided to replace your old wooden windows with plastic ones? Of course, it is better to entrust this matter to professionals, since the installation of plastic windows involves many nuances, if not observed, the windows may not retain heat, be not airtight, close poorly and fog up. If you are confident that you can cope with this task, then we will talk about the nuances of installing PVC windows in this article.

Organizational matters

Advantage self-installation plastic windows is that you yourself will do it much more scrupulously than most installation teams who sin by not complying with GOST when installing windows. But again, we repeat that if you have never seen clearly and are not familiar with the process of installing plastic windows, order installation from specialists.

When is the best time to install plastic windows?

It is best to replace windows in the warm season, from May to September. Installation work...

0 0

The impaired performance of plastic windows is restored using various adjustments. But, besides them, there is one more: adjustment of plastic windows - winter/summer, which is needed only to change the degree of pressing of the window sashes. Changing the position of the locking pin on the sash fittings allows you to press the sash harder, resulting in reduced access of cold air through the window.

The sash pins can take three positions:

Maximum sash pressure. Medium pressure (factory setting). Minimum pressure.

In winter, the doors are pressed tightly so that cold air does not penetrate through the sealing rubber; in summer the pressure softens. To prevent the effect of this fitting from weakening ahead of time, you need to follow the following recommendations for regulation:

After installing new windows, adjust the fittings to a slight pressure. While the seal is new, there is no need to squeeze it too much: having remembered the deformation, it will no longer be able to return to the original...

0 0

10

If you are talking about windows, then they are installed all year round. The only thing is that in winter installation work is not carried out if the air temperature is below -15 degrees. The window opening of competent installers is open for no more than 20 minutes, and during this time the room does not have time to cool down. With good foam you can work down to minus 15 degrees. I don’t know how it is in Novosibirsk (where Evgeny Sinyatkin lives), but in the Moscow region in the summer there is such a number of orders that installers sometimes don’t even have days off. And there are more reasons to hurry in the summer: the beach, barbecue, etc. Regarding gifts - free cheese only comes in mousetraps, all gifts are paid for by you anyway. In a serious company with normal quality control and qualified installers, there are no jambs either in winter or...

0 0

11

Home / Articles and advice / Block: “Plastic windows” When is it better to install plastic windows?

What time of year is it better to install plastic windows - a question that many people ask themselves, who have already decided for themselves another question - which plastic windows are better. Now all that remains is to choose the right season to update your plastic windows. We will be happy to tell you why it is better to install windows in the spring.

Many companies advise installing plastic windows in winter, and there is a logic to this - in winter, the production of plastic windows is not busy with work, sellers reduce prices, the shortcomings of new windows are revealed immediately after installation, since in the cold season, blowing and freezing through a plastic window is felt instantly and clearly .

However, from my own experience, a reduction in window production time due to minimal production workload can have a negative impact on quality - workers are relaxed due to an irregular work schedule, since either...

0 0

12

Among those who decide to install plastic windows, you can often hear arguments in favor of carrying out work in winter or summer. The largest number of users are inclined to order new window designs in the summer, since this season has a number of noticeable advantages. Others, on the contrary, recommend placing an order for the installation of PVC windows in winter, and also provide enough arguments in their favor. We will give just a few arguments in favor of this or that opinion, after reading which you can make your choice.

By installing new window structures in the summer, you can avoid many winter troubles. During summer installation, the room will not freeze or be exposed to drafts, and the polyurethane foam hardens much faster. As a result, the window structure will be installed hermetically and in full compliance with the basic operating rules. In addition, the work of installers in the summer is much more comfortable, which means they will not rush through the installation...

0 0

13

Seasonal installation of plastic windows. Is it possible to produce PVC installation systems in winter?

As practice shows, most consumers, having decided to install plastic windows, have no idea when it is best to do it. We competently declare that summer installation is practically no different from work performed at other times of the year. If you still have doubts, then below we will tell you how winter glazing actually happens.

Season selection

The choice of season for installing PVC windows is absolutely not important. As for winter installation, it has significant advantages. Low temperature, perhaps the only and main drawback, which significantly affects the fixation time of the foam. Here you can add slightly increased ventilation and unpleasant drafts, which good window companies have already learned to cope with - installation of window structures in winter takes place under the “protection” of a special heat shield.

The benefits are more significant and...

0 0

14

What do you think, when is it better to replace windows - in winter or summer? Most people think that the most favorable time to install plastic windows is summer. Many of our clients are sincerely surprised when they answer the question: “Do they install plastic windows in winter?” receive a positive response.

Installing windows in winter has its advantages. This:

Instant check of installation quality; high speed of order fulfillment; significant savings (due to discounts and gifts). Quick check of installation quality

One of the reasons why people are afraid to install windows in winter is the fear of freezing out the apartment. Today experts use best technologies installations. The apartment or room will be “windowless” for no more than 30 minutes. Just choose the right weather conditions so that the need for window repairs does not arise too soon.

When is the best time to replace windows?

At a temperature not lower than minus 15 degrees, in calm weather.

When the installation is complete, you...

0 0

15

What time of year is it better to install plastic windows?

Many people do not know when it is better to install plastic windows: in winter or summer? So, according to some, if you install plastic windows in winter, you can cause the room to freeze. But it is not all that bad. When the window opening is open, dismantling works will take 20 minutes. This is a fairly short period of time that will not allow the room to cool down much. In addition, immediately after installation of the structures, the customer will be able to evaluate the comfort.

During the winter season, installation plastic structures only permissible if the temperature is above –15°. The company that will fulfill the order will wait for a day with a suitable temperature. In winter, the possibility of installation failure is almost completely eliminated, because experienced specialists will be able to carry out correct calculations.

PVC windows will be installed according to a special installation price, which is calculated for operation at sub-zero temperatures. As is known...

0 0

16

To watch a video about winter window installation,
click on the triangle in the center of the image

It's winter and the issue of warmth in the apartment comes to the fore. Many people replace old windows with the first cold weather. Others, on the contrary, are trying to postpone window replacement until spring.

Why are we afraid to install windows in winter?

The main reason for refusing to install windows in winter is the fear of overcooling the room during the winter installation of new windows. According to the installation technology, the window opening remains open from 20 to 40 minutes. During this time, the room does not have time to cool down, so you should not be afraid of this.

Window installation is allowed at air temperatures not lower than minus 15 degrees. In this case, it is necessary to use professional winter polyurethane foam, which retains its characteristics (expansion, adhesion) even at subzero temperatures.

Installing windows in winter is better than in summer! Winter installation technology

Winter installation windows has one important...

0 0

17

Installation of plastic windows in winter. Should I install it or wait until summer?

Happy winter has come
With skates and sleds,
With a powdered ski track,
With a magical old fairy tale.
On the decorated Christmas tree
The lanterns are swinging.
May your winter be fun
It doesn't end any longer!
(I. Chernetskaya)

Before we had time to look back, the first snowflakes were already flying outside the window, the first ice appeared on the puddles, and the leaves flew off. And the real winter season is just around the corner. For four long months you and I will be surrounded by snowdrifts, and the thermometer will confidently register at minus levels.

But what about those who did not have time or for objective reasons did not install new windows during the warm season? After all, you must agree that we put off many things “for later,” choosing between repairs and vacations, a new car and expensive building materials.

But now, as they say, the time has come to change the windows. Let us quote F.M. Dostoevsky...

0 0

18

Many people who decide to install plastic windows in their country house ask this question. There is no definite answer to this, because... Both winter and summer have their advantages and disadvantages in installing windows. We will list most of them, and you will already determine what is more important to you and make your choice.

In summer

1. The room will not freeze or be blown through by drafts during the dismantling of old windows and installation of new ones. However, installation usually takes no more than an hour. Therefore, this advantage can be neglected.

2. Polyurethane foam dries much faster, so you'll see the final result before the workers leave.

1. Companies usually have a lot of orders in the summer, so the order fulfillment time may be delayed.

2. Your windows will be installed as quickly as possible in order to have time to do as much as possible in a day, so the quality may suffer as a result. In addition, to feel the drafts you will need to wait...

0 0