This article is devoted to the simplest devices that allow you to protect living quarters from the penetration of mosquitoes and other annoying insects - mosquito nets.

According to their design and method of fastening, models of mosquito nets are divided into the following groups:

• removable mesh in frame design;
• sliding nets;
• roll structures;
• with magnetic mount;
• with tape fastening.

Mosquito nets are not needed special care and are easily mounted in window and doorways. Their maintenance, performed no more than twice a year, most often comes down to simply washing the fabric with a mild cleaning solution.

Functional purpose

A typical mosquito net is a classic aluminum profile with a fine-mesh fabric of inconspicuous colors stretched over it. Concerning functional purpose mosquito cloth, then with the help of this simple device you can:

1. Protect your home from intrusion various insects.
2. Prevent dust and small particles of plant origin from entering the room, which are the cause of allergic diseases.
3. Protect pets from accidentally falling from an open window.

Installation of a ready-made mosquito net will not require any special skills and will cost much less than calling a specialist to your home.

Frame mesh with fastening elements

The type of fastening of the mesh at the installation site depends on where you are going to mount it. To attach this device to a modern plastic window, for example, you will need a set mounting brackets and several self-tapping screws.

If the kit does not include ready-made fasteners, installation can be done in the following sequence:

1. First of all, you need to try on the finished frame with a mesh at the installation site, which will allow you to mark its attachment points in the window opening.
2. Next, you can proceed to installing the central and corner mounting brackets on the frame in accordance with the previously made markings.
3. After this, the mounting of the mating parts of the fastening brackets is carried out, secured at the designated points. window opening using self-tapping screws of the appropriate size. In this case, a small gap (about 10 mm) will need to be left under the upper fastening elements, making it easier to insert the edge of the frame into the window space.

Installation of mosquito nets in balcony openings is carried out by simply hanging them on hinges and installing special retaining fittings, designed in the form of magnetic clamps. First, the locations for installing the hinges are marked and secured using self-tapping screws, and then (after hanging the frame and fitting) fixing magnets are installed in the right places.

There are often situations in which there is a need to place an order for the production of a new mosquito net (in case of wear or damage to the old frame, for example). In this case, you will need to make all installation measurements yourself. To do this, you will need to take the dimensions of the open window opening (its width and height) and add 2 cm and 3 cm to the results obtained, respectively.

After completing the order, you should receive from the performing company a ready-made frame with a mosquito net complete with a set fastening elements for her. This kit should include two pairs of fasteners to be installed on the top and bottom edges of the structure. When installing, try not to confuse the upper and lower sets of fasteners, while paying attention to the fact that the upper strips are noticeably wider than the lower ones.

Hanging on existing fasteners

If available on window frame elements internal fastening the mesh frame is taken by the side edges (or special handles) and simply placed with its upper edge under the brackets while simultaneously lifting the entire frame upward until it stops. The bottom edge of the mesh is then inserted into fasteners, located at the bottom of the structure, after which the frame is simply lowered into them and aligned to the installation site.

Video

With the advent of plastic windows, their manufacturers began to produce additions to them and mosquito nets appeared. Their purpose is to delay the penetration of insects and dust into the apartment when the windows are wide open. Install mosquito net DIY is very simple. Below is an example of installation on plastic window.

DIY mosquito stack installation

Before understanding the installation rules, you need to select a grid specific design. It comes in the following types:

• frame - the most common and cheap mesh, which can be either removable or sliding. This is an excellent option if you do not intend to constantly remove and put back the mosquito net.
• plunger mesh - no special corners are needed for its fastening; it is mounted directly into the window opening.
• Velcro mesh - its installation takes place with inside windows, so if necessary, such a mesh can be easily removed.
• Rolled mesh is one of the new inventions. The kit includes a guide profile, a roll of mesh and a bar for secure fixation.
• if the rolled net is laid vertically, then the pleated mosquito net spreads horizontally, and it can be moved like an accordion, rather than constantly being removed and put on.

Installing a mosquito net on a plastic window with your own hands is very simple. It all starts with the assembly of the structure. The mesh profile itself must exactly fit the size of the window. For secure fastening, plastic frame additionally secured at the top and bottom with an aluminum profile. After you have mounted the profile, it can be secured using corners, which are also made of PVC. You need to stretch the securing cord around the perimeter of the entire frame and secure the mesh to it. For convenient installation, almost every type of mosquito net has handles that allow you to fix or remove the structure.

As soon as summer comes, the owners of all apartments open the windows to allow fresh air to enter. However, the pleasant coolness is overshadowed by various insects that do not allow you to sleep peacefully and bite throughout the night. To protect yourself from such a nuisance, you should figure out how to install a mosquito net.

A standard mosquito net is made in the form of an aluminum profile with fine-mesh material stretched over it. The canvas has grey colour, which does not catch the eye, while the profile color is similar to the window color.

Mosquito cloth performs several functions:

1. Protecting your home from insects.
2. Prevents the penetration of small plant particles that can lead to allergies, as well as particles of howl and dirt.
3. With the help of a screen, you don't have to worry about the safety of your pets when you have an open window.

Characteristic

Mosquito nets have one significant advantage - easy maintenance. It is enough to wash the fabric softly a couple of times a year. detergent. It can also be removed quite easily, so it won’t take much time to clean.

The process of manufacturing and installing the mesh also does not require the investment of excessive effort or the possession of special skills and tools. Self-installation and making a mosquito net will require much lower financial costs than ordering from a company that installs PVC windows.

The mesh can be installed on a door or window opening of any size. this work does not take much time and depends on the complexity of the installation. For mounting standard frame mesh it will take no more than 2 hours.

If the old grid malfunctions, it is enough to order the same one by removing it exact dimensions. Moreover, the fastening system on the windows themselves is already available. In this case, great attention must be paid to the choice of the company to which you will give the order. You can contact the company that installed the windows, but it will cost you much less to buy from a wholesale warehouse that specializes in selling components for manufacturing companies.

If your window was installed during winter time, there is a possibility that the mosquito net will simply not be included in your order when you place it. In this case, measurements must be performed differently:

1. Open the frame for which the future mosquito cloth is intended.
2. Measure the width and height of the open opening.
3. Next, add 3 cm in height and 2 in width to the results obtained.

When the order is ready, you should be given both the mesh itself and the fasteners for it. Fasteners include two pairs (upper and lower).

When installing, do not mix up the fasteners: the upper strip is much wider than the lower one.

Installation

• Install the fasteners from below so that the mesh subsequently installed in it is located 1.5 cm lower than the window opening;
• Next, secure the top fasteners to the frame. To determine their height, measure the distance from the bottom fastener, including the height of the mesh itself, and add 10 mm;
• Install the frame as follows: pull it out through the window, then insert it into the groove of the upper fastener, pull the frame towards you and lower it into the lower groove.

To install mosquito nets, you can use two fastening methods. Let's look at them below.

Internal fastenings

Installation is carried out as follows: take the product by the side handles, place the hooks on top of the window overlay and lift the mesh up to the end. After this, place the hooks from below behind the frame flange and lower the product onto the lower fasteners. Next, align the mosquito net in the window opening.

External fastenings

This method is more reliable and practical, but more dangerous, since to secure the corners with screws you need to lean outside the window. If you have no previous installation experience in this way and you live on a high floor, entrust this work to specialists.

Installation is carried out in the following order:

• The upper fastenings are fixed with screws at a distance of 5 cm from each edge. The screws used should be no larger than 2 cm, otherwise they will rest against the window frame.
• Having installed the upper fastenings, proceed to the lower ones, for fixing which there are also two ways:

1. Suitable when there is external access to the window profile: you need to take the product, install it in the upper fastener, pull the mesh towards you and press the lower edge against the profile. At this time, another person should make a mark on the outside of the bottom edge. Using the mark made, secure the lower fasteners with screws.
2. In this case, after installing the upper fasteners, measure the length of the product, add 2.7 cm. Measure the total length from the end of the fastener from above. Make a mark and screw the bottom element according to it.

At this point the installation process is complete and you can enjoy fresh air, without fear of various insects.

Video

This video shows the process of installing a mosquito net.

For plastic windows, special nets are provided that protect the home from the penetration of various insects. If the windows were installed in cold period, then this moment could have been missed. Also sometimes already installed mesh for various reasons it may become unusable. IN similar situations Homeowners are faced with the question of how to install a mosquito net on a plastic window.

The problem we have to face is that there are no standard products available for sale. Each separate design Made to order in specific sizes. To resolve the issue, you can contact the company that manufactured the windows. Size data may be saved in the archive. You can also call a surveyor, but this will cost a fee.

the main task structures – protecting the premises from insects

Types of anti-mosquito structures

Before you start studying information on how to correctly measure a mosquito net for a plastic window, you should decide on the type of design:

• The roller blind is a mesh that is rolled up. It can be installed using a permanent mount.
• Frame or frame mesh is the most popular among consumers due to its low cost.
• The door type is a mesh stretched over a thin aluminum frame. This design is secured using canopies.
• The roller blind design began to be used quite recently, and not every company will accept such an order. The roller shutter system uses a mesh with protective finishing around the edges for a longer service life.
• Mesh secured with tape, magnets or Velcro.

This type of fastening is convenient only at first glance. In fact, at the end of the season, the mosquito net can only be peeled off together with the fastenings, and in the spring all the Velcro will need to be reinstalled

• Mosquito net with increased strength to protect pets. The material can withstand a very heavy load and will not allow the pet to fall out of the window.
• The sliding structure is installed on terraces or balconies. Parts of the structure can be opened or closed if necessary. For convenient use install guides with the help of which structural elements are moved or adjusted.
• Design with increased protection that does not allow dust to pass through. This fabric has very small cells and needs regular cleaning.

Methods of attaching mosquito structures to a plastic window

The design of the protective mesh consists of a fiberglass mesh with 1 mm cells and an aluminum frame. Attaching mosquito nets to plastic windows varies, and the choice depends on the manufacturer.

Can be considered the highest quality and most durable plunger mount. To fix the frame, spring-loaded pins with a carved cap are used, which perfectly hold the structure.

The second place in demand is occupied by the Z-shaped fastening of the mosquito net. The protective mesh is attached to the window using metal brackets. Despite the apparent reliability of the fastening, over time the structure may become loose and cracks will begin to form.

Much less commonly, a method called “Pocket” is used to secure the structure. When using this method, gaps remain between the mesh and the frame, so it is not so popular. Measurements for such structures must be taken with reserve.

Measurements for structures using Z-fasteners

Using a regular tape measure, measure the height and width of the opening along the edge of the elastic band. The data obtained should be recorded to the nearest millimeter. Ready product will exceed the dimensions of the frame by 2 cm horizontally and vertically.

Before deciding how to measure a window for a Z-mount mosquito net, it is worth checking how deep the window frame is installed. If the slopes are very close to the frame, or the box is strongly set under a quarter, then installation of the finished structure may be difficult. Such points should be taken into account during measurements and planning, and if necessary, order a structure with a different type of fastening.

Measurements for structures with plunger fastenings

The use of pins is available for frames that do not have rounded shapes. It is also worth considering that the pin is attached to the frame itself, and in the presence of a strong bevel it is almost impossible to achieve a high level of density. All this must be taken into account before starting to solve the problem of how to measure a mosquito net for a plastic window.

In order to determine the dimensions, you should find out the height and width of the frame, and then subtract 6 mm from the data obtained. A sealing brush of this size is installed along the edge of the mesh frame.

To solve the question of how to measure a window for a mosquito net with a pocket mount, you should know that for such structures, measurements are taken in exactly the same way as for Z-mounts. Since such fastening does not provide a tight fit and reliable protection, then most consumers prefer to use other types of structures.

Regardless of the type of fastening, dimensions must be determined with millimeter accuracy.

Stages of installing a mosquito net

The sequence of work is as follows:

• Marking for fastening elements. If the window has standard sizes, then two fasteners from below and two from above are enough. For very large windows 8 fasteners are used.
• Holes are scrolled in the frame. A drill is used for this.
• The fastening elements are applied to the frame and screwed with screws.
• After this, you need to decide on the mounting point of the holders. To do this, you need to measure the height and make a mark exactly in the middle.
• The holders screw into plastic construction using screws. If used plastic holders, they must be handled very carefully as they are very fragile.

Cells that are too small will become a barrier to sunlight

Features of installation and operation of a rolled mosquito net

On our website you can get acquainted with the most popular projects– from construction companies, presented at the exhibition of houses “Low-Rise Country”.

This design is installed outside and secured above the frame or to the side of it. When unwinding, the mesh fabric moves along the side guides. They protect the blade from kinking or moving too quickly, which often leads to damage. In order to avoid excessive unwinding, the design is equipped with a special spring. When the canvas has unfolded completely, it is fixed with a special latch. To put the canvas into the box, just press a button.

The design is equipped brush seals, which clean the mesh fabric. But if the mesh is heavily soiled, or needs to be cleaned due to the end summer season, it is simply removed and washed, or wiped with a wet cloth. You can also use a regular vacuum cleaner for cleaning.

Roller shutter design is very convenient to use

Features of installation and operation of mesh on plungers

The mosquito net on the rods or plungers fits very tightly to the glass unit, which ensures high level protection against insects entering the room. Rods are metal rods on a spring mechanism, which are secured using pins with outside frames

When installing or removing the structure, tighten the threads in the spring pins. If it becomes necessary to remove the structure, the pin must be rotated clockwise.

Installation of such a structure is impossible if there are bars on the windows.

To the benefits similar system fastening can be attributed to quick and easy installation, high level of tightness and excellent dust protection, resistance to low temperatures And ultraviolet radiation. It is also worth considering that this structure is almost impossible to remove from the outside. Thanks to this, such structures are installed on the first floors.

If the brush along the edges of the mesh begins to separate, then just walk along the edge waterproof glue. To clean the canvas, just wash it with a regular sponge using a soap solution.

Video description

The video shows one way to repair an old mosquito net:

Installation of the structure on the window

Before you start to deal with the problem of how to install a mosquito net on a window, you should decide on the type of fasteners:

• The lower fasteners are installed at least 15 mm below the window opening, and the upper ones must be fixed above the frame, taking into account the height of the mesh and adding 10 mm. The mesh frame should not extend beyond the window opening. In order to facilitate installation, you should first glue the fasteners to the frame with double-sided tape. This will give you the opportunity to try on the mesh and see the final result. And only then do you need to make holes for fastenings using self-tapping screws or hardware with a drill.

On our website you can find contacts of construction companies that... You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.

• Place, where window profile and the fastening is connected, it is recommended to lubricate it with silicone sealant.
• In order to avoid mistakes when marking the upper fastenings, the lower fastenings are glued, a mesh is inserted, and the upper border is marked with a regular pencil. If all measurements are taken correctly, then the border should be in the middle of the supporting part of the upper bracket.
• To install, the mesh is inserted into the upper fastenings until it stops, and then lowered onto the lower ones. If the structure is wobbly or does not look very reliable, then the situation can be solved by adjusting the height of the fastenings from above.

Before starting work, it is worth making accurate measurements

Repair or replacement of mosquito net

Despite the fact that plastic is highly durable, the structure may fail under the influence of time, temperature changes and sunlight. The canvas can also be damaged by pets. In such cases, each owner should know how to change the mosquito net on a plastic window on their own.

Replacing corners

Very often the cause of a malfunction is bursting plastic corners. Such items are sold in specialized stores. If necessary, you can purchase one or a whole set of corners. Also on sale are regular and solid or reinforced corners. At a relatively low cost, reinforced options are more reliable and last much longer.

If only one corner breaks, it is not necessary to disassemble the structure completely; it is enough to limit yourself to the top bar

First of all, pry up the sealing cord, carefully pull it and pull it out of the groove. Then you should pull the bar up.

Use pliers or a screwdriver to remove the broken elements.

New corners must be attached to the plank, and all parts of the structure must be connected to each other.

The canvas is straightened along the edges, stretched a little, and the seal is placed in the groove. In order to press it tightly, you should use a screwdriver or scissors.

In order to avoid damage during repairs, when using a hammer, you should use a wooden beam and hit through it, or use a special rubber hammer.

Video description

The replacement of corners is clearly shown in the video:

Replacing the canvas

If the integrity of the canvas is damaged, you can make a small patch or seal the torn area. This will give the structure an unattractive appearance and can be used as a temporary measure. In such situations, it is worth completely replacing the damaged canvas with a new one. To know how to measure a mosquito net and determine its size, you should add 30-40 mm to the length and width of the frame. After installing the canvas, the excess is cut off.

There is no point in repairing a damaged mesh; it should be replaced completely

To do this, you should remove the structure from the window and remove the cord along the entire perimeter, while supporting the frame. This method makes it possible to easily release the mesh.

In order for the new mesh to be easily stretched, you should purchase a slightly larger canvas.

After stretching the mesh fabric, a sealing cord is inserted into the groove along the entire perimeter. In order for the structure to have a beautiful and presentable appearance, the fabric should be stretched well and the load should be evenly distributed across the corners and profile. Excess mesh is removed using a regular sharp construction knife.

Changing the dimensions of a structure

In order to make the mosquito net a little smaller, you should remove the sealing cord, disassemble the frame into elements, and reduce the dimensions by required amount millimeters. After this, the structure is assembled in the reverse order and placed on the window.

If the structure is too large, it can be reduced

What to do if the installation handles are broken

Small handles for installation are made of plastic, which loses its quality from exposure to ultraviolet radiation and temperature changes. The handles lose flexibility and begin to break. To solve the problem, you should purchase new handles and install them instead of the old ones.

To replace it, you should remove the sealing cord in the place where the handle is located, carefully loosen it and remove it old part and replace it with a new one.

After this, you should tighten the mesh and place the sealing cord in the groove.

There are design options where the handles are screwed on with screws. Then you can unscrew them and replace the damaged handle with a whole one.

The handle for installing the structure is attached only with a rubber sealing cord, and changing it to a new one is very simple

Video description

About replacement plastic handles on a mosquito net in the video:

Replacing Z-bar holders

First of all, you should unscrew the old fasteners using a screwdriver.

After that, similar items are purchased in the store. It's best to change full set, even if only one fastening is broken.

New fasteners are screwed to the frame and install the mesh on the window.

How to assemble a structure from component parts

You can purchase and install a ready-made structure, but self-assembly will cost much less. Before deciding how to assemble a mosquito net, you should purchase components. For the design you will need a frame profile, corners for connection, a central cross member and two connectors, a rubber sealing cord, 2 handles and a mesh fabric.

Most comfortable material For the frame and crossbar, aluminum is considered. You can use plastic analogues, but they are less durable and have a shorter service life. Often aluminum profiles painted white or Brown color. This allows you to make the structure more durable and beautiful.

To paint profiles use brown or white paint

It is better to choose reinforced corners for connection. Then the structure will last longer.

The handles do not carry much load, and the choice should be guided by personal preference. When choosing a mesh, you should consider its purpose. There is a cloth that prevents dust from entering the room. Also on sale are high-strength mesh fabrics that can withstand attacks from pets and birds. If the cell size is less than 1 mm, the mesh will darken the room.

The choice of fastening depends on the design of the window.

Stages of manufacturing a structure

The work takes place in the following sequence:

1. Using a saw or hacksaw to cut metal metallic profile. Its dimensions should be less than the dimensions of the window by 10 mm horizontally and vertically. The central crossbar is cut exactly to fit the width of the window.
2. The profile must be inserted into the corners. You can use a hammer for this. At the end of this stage you should have a rectangular frame.
3. Cut the mesh fabric 30-40 mm larger than the required dimensions.
4. The mesh must be placed on the frame and, using a special roller, tucked into the profile along with the sealing cord. The mesh must be stretched evenly, and care must be taken not to form waves or folds. Handles are also installed using a cord at this stage.
5. All excess and protruding parts of the canvas are carefully trimmed with a sharp knife.

The mosquito net is ready for installation.

The fabric must be stretched well and ensure that there are no waves or folds.

Video description

Another simple way to make a mosquito net in the video:

What is the peculiarity of the Anti-Cat mesh fabric?

This type of netting is installed not only by cat owners. Very often, neighbors' pets can sneak into the house and cause damage to the premises. To protect the window opening on both sides, use a high-strength mesh fabric. For the manufacture of such structures, polyester fabric is used, which is glued along the entire perimeter and secured with metal brackets. Even a pet tries to damage the mesh with its claws or beak, and also climbs on it, the material will not sag or succumb to deformation.

If a pet lives in the house, then for safety reasons window openings should be carefully strengthened

What are the important points to consider when ordering mesh?

A mosquito net is ordered only in cases where the windows in the apartment open inward.

The main purpose of a mosquito net is to prevent insects or poplar fluff from entering the room. To ensure a tight fit, measurements should be taken to the nearest millimeter. A slight overlap on the outside is allowed.

In order to obtain a high-quality design, precise dimensions should be made.

Conclusion

Repairing and installing a mosquito net is not particularly difficult, and even a beginner with little experience can cope with this task. It is worth studying the material carefully, and the question of how to make a mosquito net will not be particularly difficult.

They made mosquito nets for me according to my measurements (about how to measure correctly). All that remains is to install mosquito nets on my windows. There is nothing complicated here, but there are small nuances that are worth considering, read more below...

I want to warn you right away that mosquito nets are attached to the outside of the window and therefore if you have a high floor you need to be very careful not to fall out of the window!

Well, let’s not delay, I’ll give you step-by-step instructions.

1) What do we need. The “mosquito” itself, fasteners (I bought them from the manufacturer for 40 rubles, a set of 4 pieces), 3 * 2 mm self-tapping screws, a tape measure and a pencil.

2) We put a “mosquito” on the window, if you measured everything correctly (), then your mesh should go with its plastic edges onto the window, and the mesh itself should be in an open space, let’s look.

3) It is the plastic edges that will hold our mosquito net; as a rule, they are 2 cm in size.

4) Now we need to set aside 2 cm at the bottom, or better yet, take about 3 cm with a margin. We mark, from the edges of the opening the lower fasteners should be at a distance of 8 - 10 cm, this size has been tested to be optimal!

5) After marking, you need to fix the lower fasteners horizontally, take them and screw them according to the marks, everything is done in seconds with a screwdriver, and it doesn’t take long with a screwdriver either!

6) After you have secured the lower fastenings, place the mesh, make sure nothing gets in the way

7) It remains to fasten the side fastenings; they are fastened vertically; personally, I fasten them just below the corner of the window, so it’s convenient to then insert the mesh. We also set aside 3 cm on the sides (with a margin) and install the fasteners.